Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] cell: set ARCH_SPARSEMEM_DEFAULT in Kconfig
  [POWERPC] Fix cell "new style" mapping and add debug
  [POWERPC] pseries: Force 4k update_flash block and list sizes
  [POWERPC] CPM_UART: Fix non-console initialisation
  [POWERPC] CPM_UART: Fix non-console transmit
  [POWERPC] Make sure initrd and dtb sections get into zImage correctly

3 files changed, 10 insertions, 10 deletions

diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h
index a8f894c..69715e5 100644
--- a/drivers/serial/cpm_uart/cpm_uart.h
+++ b/drivers/serial/cpm_uart/cpm_uart.h
@@ -88,7 +88,7 @@ extern struct uart_cpm_port cpm_uart_ports[UART_NR];
 
 /* these are located in their respective files */
 void cpm_line_cr_cmd(int line, int cmd);
-int cpm_uart_init_portdesc(void);
+int __init cpm_uart_init_portdesc(void);
 int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con);
 void cpm_uart_freebuf(struct uart_cpm_port *pinfo);
 
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index 0abb544..7a3b97f 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -195,10 +195,8 @@ static void cpm_uart_start_tx(struct uart_port *port)
 	if (cpm_uart_tx_pump(port) != 0) {
 		if (IS_SMC(pinfo)) {
 			smcp->smc_smcm |= SMCM_TX;
-			smcp->smc_smcmr |= SMCMR_TEN;
 		} else {
 			sccp->scc_sccm |= UART_SCCM_TX;
-			pinfo->sccp->scc_gsmrl |= SCC_GSMRL_ENT;
 		}
 	}
 }
@@ -421,9 +419,10 @@ static int cpm_uart_startup(struct uart_port *port)
 	/* Startup rx-int */
 	if (IS_SMC(pinfo)) {
 		pinfo->smcp->smc_smcm |= SMCM_RX;
-		pinfo->smcp->smc_smcmr |= SMCMR_REN;
+		pinfo->smcp->smc_smcmr |= (SMCMR_REN | SMCMR_TEN);
 	} else {
 		pinfo->sccp->scc_sccm |= UART_SCCM_RX;
+		pinfo->sccp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
 	}
 
 	if (!(pinfo->flags & FLAG_CONSOLE))
@@ -1350,11 +1349,10 @@ static int cpm_uart_init(void) {
 		pr_info("cpm_uart: WARNING: no UART devices found on platform bus!\n");
 		pr_info(
 		"cpm_uart: the driver will guess configuration, but this mode is no longer supported.\n");
-#ifndef CONFIG_SERIAL_CPM_CONSOLE
-		ret = cpm_uart_init_portdesc();
-		if (ret)
-			return ret;
-#endif
+
+		/* Don't run this again, if the console driver did it already */
+		if (cpm_uart_nr == 0)
+			cpm_uart_init_portdesc();
 
 		cpm_reg.nr = cpm_uart_nr;
 		ret = uart_register_driver(&cpm_reg);
@@ -1366,6 +1364,8 @@ static int cpm_uart_init(void) {
 			int con = cpm_uart_port_map[i];
 			cpm_uart_ports[con].port.line = i;
 			cpm_uart_ports[con].port.flags = UPF_BOOT_AUTOCONF;
+			if (cpm_uart_ports[con].set_lineif)
+				cpm_uart_ports[con].set_lineif(&cpm_uart_ports[con]);
 			uart_add_one_port(&cpm_reg, &cpm_uart_ports[con].port);
 		}
 
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
index 95afc37..08e55fd 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
@@ -184,7 +184,7 @@ void cpm_uart_freebuf(struct uart_cpm_port *pinfo)
 }
 
 /* Setup any dynamic params in the uart desc */
-int cpm_uart_init_portdesc(void)
+int __init cpm_uart_init_portdesc(void)
 {
 	pr_debug("CPM uart[-]:init portdesc\n");