summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorKyle McMartin <kyle@parisc-linux.org>2006-08-25 12:28:24 -0400
committerMatthew Wilcox <willy@parisc-linux.org>2006-10-04 06:50:05 -0600
commit983daeec99f07fca0a8a9180ba1ca65bbd40c820 (patch)
treed7022bf5145d11d31c305cb1056baf2263cba653 /drivers
parent1790cf9111f61d360d861901b97eba4de3b5414c (diff)
downloadop-kernel-dev-983daeec99f07fca0a8a9180ba1ca65bbd40c820.zip
op-kernel-dev-983daeec99f07fca0a8a9180ba1ca65bbd40c820.tar.gz
[PARISC] Move LBA and SBA register defines to the common ropes.h
header. This will allow the use of more constants in the agpgart driver. Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/parisc/lba_pci.c65
-rw-r--r--drivers/parisc/sba_iommu.c97
2 files changed, 1 insertions, 161 deletions
diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c
index 98f0368..ba67699 100644
--- a/drivers/parisc/lba_pci.c
+++ b/drivers/parisc/lba_pci.c
@@ -100,71 +100,6 @@
#define MODULE_NAME "LBA"
-#define LBA_FUNC_ID 0x0000 /* function id */
-#define LBA_FCLASS 0x0008 /* function class, bist, header, rev... */
-#define LBA_CAPABLE 0x0030 /* capabilities register */
-
-#define LBA_PCI_CFG_ADDR 0x0040 /* poke CFG address here */
-#define LBA_PCI_CFG_DATA 0x0048 /* read or write data here */
-
-#define LBA_PMC_MTLT 0x0050 /* Firmware sets this - read only. */
-#define LBA_FW_SCRATCH 0x0058 /* Firmware writes the PCI bus number here. */
-#define LBA_ERROR_ADDR 0x0070 /* On error, address gets logged here */
-
-#define LBA_ARB_MASK 0x0080 /* bit 0 enable arbitration. PAT/PDC enables */
-#define LBA_ARB_PRI 0x0088 /* firmware sets this. */
-#define LBA_ARB_MODE 0x0090 /* firmware sets this. */
-#define LBA_ARB_MTLT 0x0098 /* firmware sets this. */
-
-#define LBA_MOD_ID 0x0100 /* Module ID. PDC_PAT_CELL reports 4 */
-
-#define LBA_STAT_CTL 0x0108 /* Status & Control */
-#define LBA_BUS_RESET 0x01 /* Deassert PCI Bus Reset Signal */
-#define CLEAR_ERRLOG 0x10 /* "Clear Error Log" cmd */
-#define CLEAR_ERRLOG_ENABLE 0x20 /* "Clear Error Log" Enable */
-#define HF_ENABLE 0x40 /* enable HF mode (default is -1 mode) */
-
-#define LBA_LMMIO_BASE 0x0200 /* < 4GB I/O address range */
-#define LBA_LMMIO_MASK 0x0208
-
-#define LBA_GMMIO_BASE 0x0210 /* > 4GB I/O address range */
-#define LBA_GMMIO_MASK 0x0218
-
-#define LBA_WLMMIO_BASE 0x0220 /* All < 4GB ranges under the same *SBA* */
-#define LBA_WLMMIO_MASK 0x0228
-
-#define LBA_WGMMIO_BASE 0x0230 /* All > 4GB ranges under the same *SBA* */
-#define LBA_WGMMIO_MASK 0x0238
-
-#define LBA_IOS_BASE 0x0240 /* I/O port space for this LBA */
-#define LBA_IOS_MASK 0x0248
-
-#define LBA_ELMMIO_BASE 0x0250 /* Extra LMMIO range */
-#define LBA_ELMMIO_MASK 0x0258
-
-#define LBA_EIOS_BASE 0x0260 /* Extra I/O port space */
-#define LBA_EIOS_MASK 0x0268
-
-#define LBA_GLOBAL_MASK 0x0270 /* Mercury only: Global Address Mask */
-#define LBA_DMA_CTL 0x0278 /* firmware sets this */
-
-#define LBA_IBASE 0x0300 /* SBA DMA support */
-#define LBA_IMASK 0x0308
-
-/* FIXME: ignore DMA Hint stuff until we can measure performance */
-#define LBA_HINT_CFG 0x0310
-#define LBA_HINT_BASE 0x0380 /* 14 registers at every 8 bytes. */
-
-#define LBA_BUS_MODE 0x0620
-
-/* ERROR regs are needed for config cycle kluges */
-#define LBA_ERROR_CONFIG 0x0680
-#define LBA_SMART_MODE 0x20
-#define LBA_ERROR_STATUS 0x0688
-#define LBA_ROPE_CTL 0x06A0
-
-#define LBA_IOSAPIC_BASE 0x800 /* Offset of IRQ logic */
-
/* non-postable I/O port space, densely packed */
#define LBA_PORT_BASE (PCI_F_EXTEND | 0xfee00000UL)
static void __iomem *astro_iop_base __read_mostly;
diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c
index 12776b7..eed99bd 100644
--- a/drivers/parisc/sba_iommu.c
+++ b/drivers/parisc/sba_iommu.c
@@ -89,101 +89,6 @@
#define DEFAULT_DMA_HINT_REG 0
-#define SBA_FUNC_ID 0x0000 /* function id */
-#define SBA_FCLASS 0x0008 /* function class, bist, header, rev... */
-
-#define SBA_FUNC_SIZE 4096 /* SBA configuration function reg set */
-
-#define ASTRO_IOC_OFFSET (32 * SBA_FUNC_SIZE)
-#define PLUTO_IOC_OFFSET (1 * SBA_FUNC_SIZE)
-/* Ike's IOC's occupy functions 2 and 3 */
-#define IKE_IOC_OFFSET(p) ((p+2) * SBA_FUNC_SIZE)
-
-#define IOC_CTRL 0x8 /* IOC_CTRL offset */
-#define IOC_CTRL_TC (1 << 0) /* TOC Enable */
-#define IOC_CTRL_CE (1 << 1) /* Coalesce Enable */
-#define IOC_CTRL_DE (1 << 2) /* Dillon Enable */
-#define IOC_CTRL_RM (1 << 8) /* Real Mode */
-#define IOC_CTRL_NC (1 << 9) /* Non Coherent Mode */
-#define IOC_CTRL_D4 (1 << 11) /* Disable 4-byte coalescing */
-#define IOC_CTRL_DD (1 << 13) /* Disable distr. LMMIO range coalescing */
-
-
-/*
-** Offsets into MBIB (Function 0 on Ike and hopefully Astro)
-** Firmware programs this stuff. Don't touch it.
-*/
-#define LMMIO_DIRECT0_BASE 0x300
-#define LMMIO_DIRECT0_MASK 0x308
-#define LMMIO_DIRECT0_ROUTE 0x310
-
-#define LMMIO_DIST_BASE 0x360
-#define LMMIO_DIST_MASK 0x368
-#define LMMIO_DIST_ROUTE 0x370
-
-#define IOS_DIST_BASE 0x390
-#define IOS_DIST_MASK 0x398
-#define IOS_DIST_ROUTE 0x3A0
-
-#define IOS_DIRECT_BASE 0x3C0
-#define IOS_DIRECT_MASK 0x3C8
-#define IOS_DIRECT_ROUTE 0x3D0
-
-/*
-** Offsets into I/O TLB (Function 2 and 3 on Ike)
-*/
-#define ROPE0_CTL 0x200 /* "regbus pci0" */
-#define ROPE1_CTL 0x208
-#define ROPE2_CTL 0x210
-#define ROPE3_CTL 0x218
-#define ROPE4_CTL 0x220
-#define ROPE5_CTL 0x228
-#define ROPE6_CTL 0x230
-#define ROPE7_CTL 0x238
-
-#define IOC_ROPE0_CFG 0x500 /* pluto only */
-#define IOC_ROPE_AO 0x10 /* Allow "Relaxed Ordering" */
-
-
-
-#define HF_ENABLE 0x40
-
-
-#define IOC_IBASE 0x300 /* IO TLB */
-#define IOC_IMASK 0x308
-#define IOC_PCOM 0x310
-#define IOC_TCNFG 0x318
-#define IOC_PDIR_BASE 0x320
-
-
-/*
-** IOC supports 4/8/16/64KB page sizes (see TCNFG register)
-** It's safer (avoid memory corruption) to keep DMA page mappings
-** equivalently sized to VM PAGE_SIZE.
-**
-** We really can't avoid generating a new mapping for each
-** page since the Virtual Coherence Index has to be generated
-** and updated for each page.
-**
-** PAGE_SIZE could be greater than IOVP_SIZE. But not the inverse.
-*/
-#define IOVP_SIZE PAGE_SIZE
-#define IOVP_SHIFT PAGE_SHIFT
-#define IOVP_MASK PAGE_MASK
-
-#define SBA_PERF_CFG 0x708 /* Performance Counter stuff */
-#define SBA_PERF_MASK1 0x718
-#define SBA_PERF_MASK2 0x730
-
-
-/*
-** Offsets into PCI Performance Counters (functions 12 and 13)
-** Controlled by PERF registers in function 2 & 3 respectively.
-*/
-#define SBA_PERF_CNT1 0x200
-#define SBA_PERF_CNT2 0x208
-#define SBA_PERF_CNT3 0x210
-
static struct sba_device *sba_list;
static unsigned long ioc_needs_fdc = 0;
@@ -638,7 +543,7 @@ sba_io_pdir_entry(u64 *pdir_ptr, space_t sid, unsigned long vba,
asm("lci 0(%%sr1, %1), %0" : "=r" (ci) : "r" (vba));
pa |= (ci >> 12) & 0xff; /* move CI (8 bits) into lowest byte */
- pa |= 0x8000000000000000ULL; /* set "valid" bit */
+ pa |= SBA_PDIR_VALID_BIT; /* set "valid" bit */
*pdir_ptr = cpu_to_le64(pa); /* swap and store into I/O Pdir */
/*
OpenPOWER on IntegriCloud