summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorMauro Carvalho Chehab <mchehab@infradead.org>2006-09-12 20:02:09 -0300
committerMauro Carvalho Chehab <mchehab@infradead.org>2006-09-26 12:30:36 -0300
commit183d896a03e1f0e4ab69d75f123d33a62b47cf03 (patch)
tree2750a8d9e1b11ddb8da27b11134e4803e7e52d77 /drivers
parentbc28287979592c015560f8837a98b63a3be8bbc1 (diff)
downloadop-kernel-dev-183d896a03e1f0e4ab69d75f123d33a62b47cf03.zip
op-kernel-dev-183d896a03e1f0e4ab69d75f123d33a62b47cf03.tar.gz
V4L/DVB (4626): On saa7111/7113, LUMA_CTRL need a different value
Also sends the proper saa71111 init table. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/media/video/saa7115.c20
1 files changed, 12 insertions, 8 deletions
diff --git a/drivers/media/video/saa7115.c b/drivers/media/video/saa7115.c
index 7ba3714..974179d 100644
--- a/drivers/media/video/saa7115.c
+++ b/drivers/media/video/saa7115.c
@@ -155,7 +155,7 @@ static inline int saa711x_read(struct i2c_client *client, u8 reg)
/* ----------------------------------------------------------------------- */
/* SAA7111 initialization table */
-static const unsigned char saa7111_init_auto_input[] = {
+static const unsigned char saa7111_init[] = {
R_01_INC_DELAY, 0x00, /* reserved */
/*front end */
@@ -195,7 +195,7 @@ static const unsigned char saa7111_init_auto_input[] = {
};
/* SAA7113 init codes */
-static const unsigned char saa7113_init_auto_input[] = {
+static const unsigned char saa7113_init[] = {
R_01_INC_DELAY, 0x08,
R_02_INPUT_CNTL_1, 0xc2,
R_03_INPUT_CNTL_2, 0x30,
@@ -237,6 +237,7 @@ static const unsigned char saa7115_init_auto_input[] = {
/* Decoder Part */
R_06_H_SYNC_START, 0xeb, /* horiz sync begin = -21 */
R_07_H_SYNC_STOP, 0xe0, /* horiz sync stop = -17 */
+ R_09_LUMA_CNTL, 0x53, /* 0x53, was 0x56 for 60hz. luminance control */
R_0A_LUMA_BRIGHT_CNTL, 0x80, /* was 0x88. decoder brightness, 0x80 is itu standard */
R_0B_LUMA_CONTRAST_CNTL, 0x44, /* was 0x48. decoder contrast, 0x44 is itu standard */
R_0C_CHROMA_SAT_CNTL, 0x40, /* was 0x47. decoder saturation, 0x40 is itu standard */
@@ -582,7 +583,6 @@ static const unsigned char saa7115_init_misc[] = {
R_5E_SDID, 0x35,
R_02_INPUT_CNTL_1, 0x84, /* input tuner -> input 4, amplifier active */
- R_09_LUMA_CNTL, 0x53, /* 0x53, was 0x56 for 60hz. luminance control */
R_80_GLOBAL_CNTL_1, 0x20, /* enable task B */
R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0,
@@ -1518,11 +1518,15 @@ static int saa711x_attach(struct i2c_adapter *adapter, int address, int kind)
v4l_dbg(1, debug, client, "writing init values\n");
/* init to 60hz/48khz */
- if (state->ident == V4L2_IDENT_SAA7111 ||
- state->ident == V4L2_IDENT_SAA7113) {
- state->crystal_freq = SAA7115_FREQ_24_576_MHZ;
- saa711x_writeregs(client, saa7113_init_auto_input);
- } else {
+ state->crystal_freq = SAA7115_FREQ_24_576_MHZ;
+ switch (state->ident) {
+ case V4L2_IDENT_SAA7111:
+ saa711x_writeregs(client, saa7111_init);
+ break;
+ case V4L2_IDENT_SAA7113:
+ saa711x_writeregs(client, saa7113_init);
+ break;
+ default:
state->crystal_freq = SAA7115_FREQ_32_11_MHZ;
saa711x_writeregs(client, saa7115_init_auto_input);
}
OpenPOWER on IntegriCloud