summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorRussell King <rmk@dyn-67.arm.linux.org.uk>2007-09-01 21:27:18 +0100
committerRussell King <rmk+kernel@arm.linux.org.uk>2007-10-15 18:53:37 +0100
commit073ac8fd4a3e9a9265e8a59e0a79bc4b0b3822c3 (patch)
tree2abd149145f8dc579ccd354b95394050d590cdc2 /drivers
parent97d97224ff361e08777fb33e0fd193ca877dac28 (diff)
downloadop-kernel-dev-073ac8fd4a3e9a9265e8a59e0a79bc4b0b3822c3.zip
op-kernel-dev-073ac8fd4a3e9a9265e8a59e0a79bc4b0b3822c3.tar.gz
[NET] smc91x: fix PXA DMA support code
The PXA DMA support code for smc91x doesn't pass a struct device to the dma_*map_single() functions, which leads to an oops in the dma bounce code. We have a struct device which was used to probe the SMC chip. Use it. (This patch is slightly larger because it requires struct smc_local to move into the header file.) Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/net/smc91x.c55
-rw-r--r--drivers/net/smc91x.h64
2 files changed, 63 insertions, 56 deletions
diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index 24e610e..7da7589 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -173,49 +173,6 @@ MODULE_LICENSE("GPL");
*/
#define MII_DELAY 1
-/* store this information for the driver.. */
-struct smc_local {
- /*
- * If I have to wait until memory is available to send a
- * packet, I will store the skbuff here, until I get the
- * desired memory. Then, I'll send it out and free it.
- */
- struct sk_buff *pending_tx_skb;
- struct tasklet_struct tx_task;
-
- /* version/revision of the SMC91x chip */
- int version;
-
- /* Contains the current active transmission mode */
- int tcr_cur_mode;
-
- /* Contains the current active receive mode */
- int rcr_cur_mode;
-
- /* Contains the current active receive/phy mode */
- int rpc_cur_mode;
- int ctl_rfduplx;
- int ctl_rspeed;
-
- u32 msg_enable;
- u32 phy_type;
- struct mii_if_info mii;
-
- /* work queue */
- struct work_struct phy_configure;
- struct net_device *dev;
- int work_pending;
-
- spinlock_t lock;
-
-#ifdef SMC_USE_PXA_DMA
- /* DMA needs the physical address of the chip */
- u_long physaddr;
-#endif
- void __iomem *base;
- void __iomem *datacs;
-};
-
#if SMC_DEBUG > 0
#define DBG(n, args...) \
do { \
@@ -2215,17 +2172,19 @@ static int smc_drv_probe(struct platform_device *pdev)
goto out_release_attrib;
}
- platform_set_drvdata(pdev, ndev);
- ret = smc_probe(ndev, addr);
- if (ret != 0)
- goto out_iounmap;
#ifdef SMC_USE_PXA_DMA
- else {
+ {
struct smc_local *lp = netdev_priv(ndev);
+ lp->device = &pdev->dev;
lp->physaddr = res->start;
}
#endif
+ platform_set_drvdata(pdev, ndev);
+ ret = smc_probe(ndev, addr);
+ if (ret != 0)
+ goto out_iounmap;
+
smc_request_datacs(pdev, ndev);
return 0;
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index af9e6bf..729fd28 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -462,6 +462,52 @@ static inline void LPD7_SMC_outsw (unsigned char* a, int r,
#endif
+
+/* store this information for the driver.. */
+struct smc_local {
+ /*
+ * If I have to wait until memory is available to send a
+ * packet, I will store the skbuff here, until I get the
+ * desired memory. Then, I'll send it out and free it.
+ */
+ struct sk_buff *pending_tx_skb;
+ struct tasklet_struct tx_task;
+
+ /* version/revision of the SMC91x chip */
+ int version;
+
+ /* Contains the current active transmission mode */
+ int tcr_cur_mode;
+
+ /* Contains the current active receive mode */
+ int rcr_cur_mode;
+
+ /* Contains the current active receive/phy mode */
+ int rpc_cur_mode;
+ int ctl_rfduplx;
+ int ctl_rspeed;
+
+ u32 msg_enable;
+ u32 phy_type;
+ struct mii_if_info mii;
+
+ /* work queue */
+ struct work_struct phy_configure;
+ struct net_device *dev;
+ int work_pending;
+
+ spinlock_t lock;
+
+#ifdef SMC_USE_PXA_DMA
+ /* DMA needs the physical address of the chip */
+ u_long physaddr;
+ struct device *device;
+#endif
+ void __iomem *base;
+ void __iomem *datacs;
+};
+
+
#ifdef SMC_USE_PXA_DMA
/*
* Let's use the DMA engine on the XScale PXA2xx for RX packets. This is
@@ -476,11 +522,12 @@ static inline void LPD7_SMC_outsw (unsigned char* a, int r,
#ifdef SMC_insl
#undef SMC_insl
#define SMC_insl(a, r, p, l) \
- smc_pxa_dma_insl(a, lp->physaddr, r, dev->dma, p, l)
+ smc_pxa_dma_insl(a, lp, r, dev->dma, p, l)
static inline void
-smc_pxa_dma_insl(void __iomem *ioaddr, u_long physaddr, int reg, int dma,
+smc_pxa_dma_insl(void __iomem *ioaddr, struct smc_local *lp, int reg, int dma,
u_char *buf, int len)
{
+ u_long physaddr = lp->physaddr;
dma_addr_t dmabuf;
/* fallback if no DMA available */
@@ -497,7 +544,7 @@ smc_pxa_dma_insl(void __iomem *ioaddr, u_long physaddr, int reg, int dma,
}
len *= 4;
- dmabuf = dma_map_single(NULL, buf, len, DMA_FROM_DEVICE);
+ dmabuf = dma_map_single(lp->device, buf, len, DMA_FROM_DEVICE);
DCSR(dma) = DCSR_NODESC;
DTADR(dma) = dmabuf;
DSADR(dma) = physaddr + reg;
@@ -507,18 +554,19 @@ smc_pxa_dma_insl(void __iomem *ioaddr, u_long physaddr, int reg, int dma,
while (!(DCSR(dma) & DCSR_STOPSTATE))
cpu_relax();
DCSR(dma) = 0;
- dma_unmap_single(NULL, dmabuf, len, DMA_FROM_DEVICE);
+ dma_unmap_single(lp->device, dmabuf, len, DMA_FROM_DEVICE);
}
#endif
#ifdef SMC_insw
#undef SMC_insw
#define SMC_insw(a, r, p, l) \
- smc_pxa_dma_insw(a, lp->physaddr, r, dev->dma, p, l)
+ smc_pxa_dma_insw(a, lp, r, dev->dma, p, l)
static inline void
-smc_pxa_dma_insw(void __iomem *ioaddr, u_long physaddr, int reg, int dma,
+smc_pxa_dma_insw(void __iomem *ioaddr, struct smc_local *lp, int reg, int dma,
u_char *buf, int len)
{
+ u_long physaddr = lp->physaddr;
dma_addr_t dmabuf;
/* fallback if no DMA available */
@@ -535,7 +583,7 @@ smc_pxa_dma_insw(void __iomem *ioaddr, u_long physaddr, int reg, int dma,
}
len *= 2;
- dmabuf = dma_map_single(NULL, buf, len, DMA_FROM_DEVICE);
+ dmabuf = dma_map_single(lp->device, buf, len, DMA_FROM_DEVICE);
DCSR(dma) = DCSR_NODESC;
DTADR(dma) = dmabuf;
DSADR(dma) = physaddr + reg;
@@ -545,7 +593,7 @@ smc_pxa_dma_insw(void __iomem *ioaddr, u_long physaddr, int reg, int dma,
while (!(DCSR(dma) & DCSR_STOPSTATE))
cpu_relax();
DCSR(dma) = 0;
- dma_unmap_single(NULL, dmabuf, len, DMA_FROM_DEVICE);
+ dma_unmap_single(lp->device, dmabuf, len, DMA_FROM_DEVICE);
}
#endif
OpenPOWER on IntegriCloud