summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorThibaut VARENE <T-Bone@parisc-linux.org>2006-02-03 03:03:48 -0800
committerLinus Torvalds <torvalds@g5.osdl.org>2006-02-03 08:32:01 -0800
commitd237bf49261ed812a17f7123fea9b80ef673ca0f (patch)
treee0ac0c126e5705cc7f9116211994195bfca2d652 /drivers
parent75b84e94aa9fa74bda9a393b55ef6778b90eb1a8 (diff)
downloadop-kernel-dev-d237bf49261ed812a17f7123fea9b80ef673ca0f.zip
op-kernel-dev-d237bf49261ed812a17f7123fea9b80ef673ca0f.tar.gz
[PATCH] ide: restore support for AEC6280M cards in aec62xx.c
This patch adds missing initialization sequence, necessary to get the "Macintosh" version of AEC6280 cards to work in Linux. Without this patch, the driver hangs for several minutes trying to initialize the card and the kernel is left in an unstable state. This patch has been tested fine on ppc and i386. Signed-off-by: Thibaut VARENE <varenet@parisc-linux.org> Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/ide/pci/aec62xx.c15
1 files changed, 15 insertions, 0 deletions
diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c
index a21b1e1..c743e68 100644
--- a/drivers/ide/pci/aec62xx.c
+++ b/drivers/ide/pci/aec62xx.c
@@ -262,6 +262,21 @@ static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const ch
else
pci_set_drvdata(dev, (void *) aec6xxx_34_base);
+ /* These are necessary to get AEC6280 Macintosh cards to work */
+ if ((dev->device == PCI_DEVICE_ID_ARTOP_ATP865) ||
+ (dev->device == PCI_DEVICE_ID_ARTOP_ATP865R)) {
+ u8 reg49h = 0, reg4ah = 0;
+ /* Clear reset and test bits. */
+ pci_read_config_byte(dev, 0x49, &reg49h);
+ pci_write_config_byte(dev, 0x49, reg49h & ~0x30);
+ /* Enable chip interrupt output. */
+ pci_read_config_byte(dev, 0x4a, &reg4ah);
+ pci_write_config_byte(dev, 0x4a, reg4ah & ~0x01);
+ /* Enable burst mode. */
+ pci_read_config_byte(dev, 0x4a, &reg4ah);
+ pci_write_config_byte(dev, 0x4a, reg4ah | 0x80);
+ }
+
return dev->irq;
}
OpenPOWER on IntegriCloud