diff options
author | Jianguo Sun <sunjianguo1@huawei.com> | 2018-01-24 13:47:37 +0800 |
---|---|---|
committer | Kishon Vijay Abraham I <kishon@ti.com> | 2018-02-21 11:54:37 +0530 |
commit | d0bffd17a3fc49396518591eae42580530aecd25 (patch) | |
tree | 6282d28d9967bc2b256d0103711b67d0afabb90c /drivers | |
parent | 5669f91a086ca377a5f5b15885d03482435006d6 (diff) | |
download | op-kernel-dev-d0bffd17a3fc49396518591eae42580530aecd25.zip op-kernel-dev-d0bffd17a3fc49396518591eae42580530aecd25.tar.gz |
phy: add combo phy driver for HiSilicon STB SoCs
Add combo phy driver for HiSilicon STB SoCs. This phy can be
used as pcie-phy, sata-phy or usb-phy.
Changes for v5:
- Add bindings doc for Hi3798CV200 peripheral controller, and refer to
the bindings of this parent node in combphy bindings doc.
Changes for v4:
- Instead of relying on device id, add a new property
hisilicon,fixed-mode for combphy device that doesn't support mode
select but a fixed phy mode.
- Move combphy mode select register bits definition to device tree, as
it may vary from one device to another.
Changes for v3:
- Make combphy device be child of peripheral controller and use 'reg'
property for mapping combphy configuration registers.
- Kill "hisilicon,peripheral-syscon" property, since parent node is
just the syscon controller now.
- Check combphy id to handle the quirk that combphy0 can not configure
mode but always works in USB3 mode.
- Unify phy .init and .exit hooks for different combphy instances and
work modes, as the only quirk we need to handle is that combphy0 can
only work in USB3 mode.
- Better naming for clock and reset, 'ref' to 'ref_clk', 'por' to
'por_rst'.
Changes for v2:
- Move DT bindings into a separate patch.
- Drop the spurious newline from drivers/phy/Makefile.
- Use the phy type defines in dt-bindings/phy/phy.h.
- Use PTR_ERR_OR_ZERO() for checking return from
devm_of_phy_provider_register().
- Add USB3 phy support.
Signed-off-by: Jianguo Sun <sunjianguo1@huawei.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/phy/hisilicon/Kconfig | 9 | ||||
-rw-r--r-- | drivers/phy/hisilicon/Makefile | 1 | ||||
-rw-r--r-- | drivers/phy/hisilicon/phy-histb-combphy.c | 289 |
3 files changed, 299 insertions, 0 deletions
diff --git a/drivers/phy/hisilicon/Kconfig b/drivers/phy/hisilicon/Kconfig index 6164c4c..d9afe2b 100644 --- a/drivers/phy/hisilicon/Kconfig +++ b/drivers/phy/hisilicon/Kconfig @@ -11,6 +11,15 @@ config PHY_HI6220_USB To compile this driver as a module, choose M here. +config PHY_HISTB_COMBPHY + tristate "HiSilicon STB SoCs COMBPHY support" + depends on (ARCH_HISI && ARM64) || COMPILE_TEST + select GENERIC_PHY + select MFD_SYSCON + help + Enable this to support the HISILICON STB SoCs COMBPHY. + If unsure, say N. + config PHY_HIX5HD2_SATA tristate "HIX5HD2 SATA PHY Driver" depends on ARCH_HIX5HD2 && OF && HAS_IOMEM diff --git a/drivers/phy/hisilicon/Makefile b/drivers/phy/hisilicon/Makefile index 541b348..5e8e2df 100644 --- a/drivers/phy/hisilicon/Makefile +++ b/drivers/phy/hisilicon/Makefile @@ -1,2 +1,3 @@ obj-$(CONFIG_PHY_HI6220_USB) += phy-hi6220-usb.o +obj-$(CONFIG_PHY_HISTB_COMBPHY) += phy-histb-combphy.o obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o diff --git a/drivers/phy/hisilicon/phy-histb-combphy.c b/drivers/phy/hisilicon/phy-histb-combphy.c new file mode 100644 index 0000000..5777b31 --- /dev/null +++ b/drivers/phy/hisilicon/phy-histb-combphy.c @@ -0,0 +1,289 @@ +/* + * COMBPHY driver for HiSilicon STB SoCs + * + * Copyright (C) 2016-2017 HiSilicon Co., Ltd. http://www.hisilicon.com + * + * Authors: Jianguo Sun <sunjianguo1@huawei.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/phy/phy.h> +#include <linux/regmap.h> +#include <linux/reset.h> +#include <dt-bindings/phy/phy.h> + +#define COMBPHY_MODE_PCIE 0 +#define COMBPHY_MODE_USB3 1 +#define COMBPHY_MODE_SATA 2 + +#define COMBPHY_CFG_REG 0x0 +#define COMBPHY_BYPASS_CODEC BIT(31) +#define COMBPHY_TEST_WRITE BIT(24) +#define COMBPHY_TEST_DATA_SHIFT 20 +#define COMBPHY_TEST_DATA_MASK GENMASK(23, 20) +#define COMBPHY_TEST_ADDR_SHIFT 12 +#define COMBPHY_TEST_ADDR_MASK GENMASK(16, 12) +#define COMBPHY_CLKREF_OUT_OEN BIT(0) + +struct histb_combphy_mode { + int fixed; + int select; + u32 reg; + u32 shift; + u32 mask; +}; + +struct histb_combphy_priv { + void __iomem *mmio; + struct regmap *syscon; + struct reset_control *por_rst; + struct clk *ref_clk; + struct phy *phy; + struct histb_combphy_mode mode; +}; + +static void nano_register_write(struct histb_combphy_priv *priv, + u32 addr, u32 data) +{ + void __iomem *reg = priv->mmio + COMBPHY_CFG_REG; + u32 val; + + /* Set up address and data for the write */ + val = readl(reg); + val &= ~COMBPHY_TEST_ADDR_MASK; + val |= addr << COMBPHY_TEST_ADDR_SHIFT; + val &= ~COMBPHY_TEST_DATA_MASK; + val |= data << COMBPHY_TEST_DATA_SHIFT; + writel(val, reg); + + /* Flip strobe control to trigger the write */ + val &= ~COMBPHY_TEST_WRITE; + writel(val, reg); + val |= COMBPHY_TEST_WRITE; + writel(val, reg); +} + +static int is_mode_fixed(struct histb_combphy_mode *mode) +{ + return (mode->fixed != PHY_NONE) ? true : false; +} + +static int histb_combphy_set_mode(struct histb_combphy_priv *priv) +{ + struct histb_combphy_mode *mode = &priv->mode; + struct regmap *syscon = priv->syscon; + u32 hw_sel; + + if (is_mode_fixed(mode)) + return 0; + + switch (mode->select) { + case PHY_TYPE_SATA: + hw_sel = COMBPHY_MODE_SATA; + break; + case PHY_TYPE_PCIE: + hw_sel = COMBPHY_MODE_PCIE; + break; + case PHY_TYPE_USB3: + hw_sel = COMBPHY_MODE_USB3; + break; + default: + return -EINVAL; + } + + return regmap_update_bits(syscon, mode->reg, mode->mask, + hw_sel << mode->shift); +} + +static int histb_combphy_init(struct phy *phy) +{ + struct histb_combphy_priv *priv = phy_get_drvdata(phy); + u32 val; + int ret; + + ret = histb_combphy_set_mode(priv); + if (ret) + return ret; + + /* Clear bypass bit to enable encoding/decoding */ + val = readl(priv->mmio + COMBPHY_CFG_REG); + val &= ~COMBPHY_BYPASS_CODEC; + writel(val, priv->mmio + COMBPHY_CFG_REG); + + ret = clk_prepare_enable(priv->ref_clk); + if (ret) + return ret; + + reset_control_deassert(priv->por_rst); + + /* Enable EP clock */ + val = readl(priv->mmio + COMBPHY_CFG_REG); + val |= COMBPHY_CLKREF_OUT_OEN; + writel(val, priv->mmio + COMBPHY_CFG_REG); + + /* Need to wait for EP clock stable */ + mdelay(5); + + /* Configure nano phy registers as suggested by vendor */ + nano_register_write(priv, 0x1, 0x8); + nano_register_write(priv, 0xc, 0x9); + nano_register_write(priv, 0x1a, 0x4); + + return 0; +} + +static int histb_combphy_exit(struct phy *phy) +{ + struct histb_combphy_priv *priv = phy_get_drvdata(phy); + u32 val; + + /* Disable EP clock */ + val = readl(priv->mmio + COMBPHY_CFG_REG); + val &= ~COMBPHY_CLKREF_OUT_OEN; + writel(val, priv->mmio + COMBPHY_CFG_REG); + + reset_control_assert(priv->por_rst); + clk_disable_unprepare(priv->ref_clk); + + return 0; +} + +static const struct phy_ops histb_combphy_ops = { + .init = histb_combphy_init, + .exit = histb_combphy_exit, + .owner = THIS_MODULE, +}; + +static struct phy *histb_combphy_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct histb_combphy_priv *priv = dev_get_drvdata(dev); + struct histb_combphy_mode *mode = &priv->mode; + + if (args->args_count < 1) { + dev_err(dev, "invalid number of arguments\n"); + return ERR_PTR(-EINVAL); + } + + mode->select = args->args[0]; + + if (mode->select < PHY_TYPE_SATA || mode->select > PHY_TYPE_USB3) { + dev_err(dev, "invalid phy mode select argument\n"); + return ERR_PTR(-EINVAL); + } + + if (is_mode_fixed(mode) && mode->select != mode->fixed) { + dev_err(dev, "mode select %d mismatch fixed phy mode %d\n", + mode->select, mode->fixed); + return ERR_PTR(-EINVAL); + } + + return priv->phy; +} + +static int histb_combphy_probe(struct platform_device *pdev) +{ + struct phy_provider *phy_provider; + struct device *dev = &pdev->dev; + struct histb_combphy_priv *priv; + struct device_node *np = dev->of_node; + struct histb_combphy_mode *mode; + struct resource *res; + u32 vals[3]; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->mmio = devm_ioremap_resource(dev, res); + if (IS_ERR(priv->mmio)) { + ret = PTR_ERR(priv->mmio); + return ret; + } + + priv->syscon = syscon_node_to_regmap(np->parent); + if (IS_ERR(priv->syscon)) { + dev_err(dev, "failed to find peri_ctrl syscon regmap\n"); + return PTR_ERR(priv->syscon); + } + + mode = &priv->mode; + mode->fixed = PHY_NONE; + + ret = of_property_read_u32(np, "hisilicon,fixed-mode", &mode->fixed); + if (ret == 0) + dev_dbg(dev, "found fixed phy mode %d\n", mode->fixed); + + ret = of_property_read_u32_array(np, "hisilicon,mode-select-bits", + vals, ARRAY_SIZE(vals)); + if (ret == 0) { + if (is_mode_fixed(mode)) { + dev_err(dev, "found select bits for fixed mode phy\n"); + return -EINVAL; + } + + mode->reg = vals[0]; + mode->shift = vals[1]; + mode->mask = vals[2]; + dev_dbg(dev, "found mode select bits\n"); + } else { + if (!is_mode_fixed(mode)) { + dev_err(dev, "no valid select bits found for non-fixed phy\n"); + return -ENODEV; + } + } + + priv->ref_clk = devm_clk_get(dev, NULL); + if (IS_ERR(priv->ref_clk)) { + dev_err(dev, "failed to find ref clock\n"); + return PTR_ERR(priv->ref_clk); + } + + priv->por_rst = devm_reset_control_get(dev, NULL); + if (IS_ERR(priv->por_rst)) { + dev_err(dev, "failed to get poweron reset\n"); + return PTR_ERR(priv->por_rst); + } + + priv->phy = devm_phy_create(dev, NULL, &histb_combphy_ops); + if (IS_ERR(priv->phy)) { + dev_err(dev, "failed to create combphy\n"); + return PTR_ERR(priv->phy); + } + + dev_set_drvdata(dev, priv); + phy_set_drvdata(priv->phy, priv); + + phy_provider = devm_of_phy_provider_register(dev, histb_combphy_xlate); + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id histb_combphy_of_match[] = { + { .compatible = "hisilicon,hi3798cv200-combphy" }, + { }, +}; +MODULE_DEVICE_TABLE(of, histb_combphy_of_match); + +static struct platform_driver histb_combphy_driver = { + .probe = histb_combphy_probe, + .driver = { + .name = "combphy", + .of_match_table = histb_combphy_of_match, + }, +}; +module_platform_driver(histb_combphy_driver); + +MODULE_DESCRIPTION("HiSilicon STB COMBPHY driver"); +MODULE_LICENSE("GPL v2"); |