summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorBryan O'Sullivan <bos@pathscale.com>2006-04-24 14:23:00 -0700
committerRoland Dreier <rolandd@cisco.com>2006-05-01 12:14:14 -0700
commit52e7fad825c47fb86801f23b9f793da1d2774f18 (patch)
tree22b5b7c03c07a786a20e7faa8d3a2901685b46f8 /drivers
parent23e86a4584606a08393e0ad3a5ca27b19a3de374 (diff)
downloadop-kernel-dev-52e7fad825c47fb86801f23b9f793da1d2774f18.zip
op-kernel-dev-52e7fad825c47fb86801f23b9f793da1d2774f18.tar.gz
IB/ipath: change handling of PIO buffers
Different ipath hardware types have different numbers of buffers available, so we decide on the counts ourselves unless we are specifically overridden with a module parameter. Signed-off-by: Bryan O'Sullivan <bos@pathscale.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/infiniband/hw/ipath/ipath_init_chip.c36
1 files changed, 22 insertions, 14 deletions
diff --git a/drivers/infiniband/hw/ipath/ipath_init_chip.c b/drivers/infiniband/hw/ipath/ipath_init_chip.c
index 2823ff9..16f640e 100644
--- a/drivers/infiniband/hw/ipath/ipath_init_chip.c
+++ b/drivers/infiniband/hw/ipath/ipath_init_chip.c
@@ -53,13 +53,19 @@ MODULE_PARM_DESC(cfgports, "Set max number of ports to use");
/*
* Number of buffers reserved for driver (layered drivers and SMA
- * send). Reserved at end of buffer list.
+ * send). Reserved at end of buffer list. Initialized based on
+ * number of PIO buffers if not set via module interface.
+ * The problem with this is that it's global, but we'll use different
+ * numbers for different chip types. So the default value is not
+ * very useful. I've redefined it for the 1.3 release so that it's
+ * zero unless set by the user to something else, in which case we
+ * try to respect it.
*/
-static ushort ipath_kpiobufs = 32;
+static ushort ipath_kpiobufs;
static int ipath_set_kpiobufs(const char *val, struct kernel_param *kp);
-module_param_call(kpiobufs, ipath_set_kpiobufs, param_get_uint,
+module_param_call(kpiobufs, ipath_set_kpiobufs, param_get_ushort,
&ipath_kpiobufs, S_IWUSR | S_IRUGO);
MODULE_PARM_DESC(kpiobufs, "Set number of PIO buffers for driver");
@@ -531,8 +537,11 @@ static int init_housekeeping(struct ipath_devdata *dd,
* Don't clear ipath_flags as 8bit mode was set before
* entering this func. However, we do set the linkstate to
* unknown, so we can watch for a transition.
+ * PRESENT is set because we want register reads to work,
+ * and the kernel infrastructure saw it in config space;
+ * We clear it if we have failures.
*/
- dd->ipath_flags |= IPATH_LINKUNK;
+ dd->ipath_flags |= IPATH_LINKUNK | IPATH_PRESENT;
dd->ipath_flags &= ~(IPATH_LINKACTIVE | IPATH_LINKARMED |
IPATH_LINKDOWN | IPATH_LINKINIT);
@@ -560,6 +569,7 @@ static int init_housekeeping(struct ipath_devdata *dd,
|| (dd->ipath_uregbase & 0xffffffff) == 0xffffffff) {
ipath_dev_err(dd, "Register read failures from chip, "
"giving up initialization\n");
+ dd->ipath_flags &= ~IPATH_PRESENT;
ret = -ENODEV;
goto done;
}
@@ -682,16 +692,14 @@ int ipath_init_chip(struct ipath_devdata *dd, int reinit)
*/
dd->ipath_pioavregs = ALIGN(val, sizeof(u64) * BITS_PER_BYTE / 2)
/ (sizeof(u64) * BITS_PER_BYTE / 2);
- if (!ipath_kpiobufs) /* have to have at least 1, for SMA */
- kpiobufs = ipath_kpiobufs = 1;
- else if ((dd->ipath_piobcnt2k + dd->ipath_piobcnt4k) <
- (dd->ipath_cfgports * IPATH_MIN_USER_PORT_BUFCNT)) {
- dev_info(&dd->pcidev->dev, "Too few PIO buffers (%u) "
- "for %u ports to have %u each!\n",
- dd->ipath_piobcnt2k + dd->ipath_piobcnt4k,
- dd->ipath_cfgports, IPATH_MIN_USER_PORT_BUFCNT);
- kpiobufs = 1; /* reserve just the minimum for SMA/ether */
- } else
+ if (ipath_kpiobufs == 0) {
+ /* not set by user, or set explictly to default */
+ if ((dd->ipath_piobcnt2k + dd->ipath_piobcnt4k) > 128)
+ kpiobufs = 32;
+ else
+ kpiobufs = 16;
+ }
+ else
kpiobufs = ipath_kpiobufs;
if (kpiobufs >
OpenPOWER on IntegriCloud