diff options
author | Stephane Grosjean <s.grosjean@peak-system.com> | 2012-03-02 16:21:19 +0100 |
---|---|---|
committer | Marc Kleine-Budde <mkl@pengutronix.de> | 2012-03-03 17:40:39 +0100 |
commit | e6d9c80b7ca1504411ad6d7acdb8683e4ae1c9cd (patch) | |
tree | 0bb7a7b48fe5e79053b92708612ad1f10df0572c /drivers | |
parent | 224223aaf9a44cd484019d2b765b6ca2beee6dd4 (diff) | |
download | op-kernel-dev-e6d9c80b7ca1504411ad6d7acdb8683e4ae1c9cd.zip op-kernel-dev-e6d9c80b7ca1504411ad6d7acdb8683e4ae1c9cd.tar.gz |
can: peak_pci: add support of some new PEAK-System PCI cards
This patch adds the support of some new PEAK-System PCI cards in the CAN
network sub-system. These are:
PCAN-PCIeC (PCI-ExpressCard)
PCAN-mminiPCI (mini-PCI)
PCAN-PCI (PCI next-gen)
This patch also adds the control of the blinking leds of the PCAN-PCIeC.
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/net/can/sja1000/Kconfig | 18 | ||||
-rw-r--r-- | drivers/net/can/sja1000/peak_pci.c | 505 |
2 files changed, 506 insertions, 17 deletions
diff --git a/drivers/net/can/sja1000/Kconfig b/drivers/net/can/sja1000/Kconfig index b21523d..fdc3926 100644 --- a/drivers/net/can/sja1000/Kconfig +++ b/drivers/net/can/sja1000/Kconfig @@ -44,11 +44,23 @@ config CAN_EMS_PCI (http://www.ems-wuensche.de). config CAN_PEAK_PCI - tristate "PEAK PCAN PCI/PCIe Cards" + tristate "PEAK PCAN-PCI/PCIe/miniPCI Cards" depends on PCI ---help--- - This driver is for the PCAN PCI/PCIe cards (1, 2, 3 or 4 channels) - from PEAK Systems (http://www.peak-system.com). + This driver is for the PCAN-PCI/PCIe/miniPCI cards + (1, 2, 3 or 4 channels) from PEAK-System Technik + (http://www.peak-system.com). + +config CAN_PEAK_PCIEC + bool "PEAK PCAN-ExpressCard Cards" + depends on CAN_PEAK_PCI + select I2C + select I2C_ALGOBIT + default y + ---help--- + Say Y here if you want to use a PCAN-ExpressCard from PEAK-System + Technik. This will also automatically select I2C and I2C_ALGO + configuration options. config CAN_KVASER_PCI tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards" diff --git a/drivers/net/can/sja1000/peak_pci.c b/drivers/net/can/sja1000/peak_pci.c index 2147959..5f92b86 100644 --- a/drivers/net/can/sja1000/peak_pci.c +++ b/drivers/net/can/sja1000/peak_pci.c @@ -1,5 +1,6 @@ /* * Copyright (C) 2007, 2011 Wolfgang Grandegger <wg@grandegger.com> + * Copyright (C) 2012 Stephane Grosjean <s.grosjean@peak-system.com> * * Derived from the PCAN project file driver/src/pcan_pci.c: * @@ -13,10 +14,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software Foundation, - * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #include <linux/kernel.h> @@ -26,22 +23,26 @@ #include <linux/delay.h> #include <linux/pci.h> #include <linux/io.h> +#include <linux/i2c.h> +#include <linux/i2c-algo-bit.h> #include <linux/can.h> #include <linux/can/dev.h> #include "sja1000.h" MODULE_AUTHOR("Wolfgang Grandegger <wg@grandegger.com>"); -MODULE_DESCRIPTION("Socket-CAN driver for PEAK PCAN PCI/PCIe cards"); -MODULE_SUPPORTED_DEVICE("PEAK PCAN PCI/PCIe CAN card"); +MODULE_DESCRIPTION("Socket-CAN driver for PEAK PCAN PCI family cards"); +MODULE_SUPPORTED_DEVICE("PEAK PCAN PCI/PCIe/PCIeC miniPCI CAN cards"); MODULE_LICENSE("GPL v2"); #define DRV_NAME "peak_pci" +struct peak_pciec_card; struct peak_pci_chan { void __iomem *cfg_base; /* Common for all channels */ struct net_device *prev_dev; /* Chain of network devices */ u16 icr_mask; /* Interrupt mask for fast ack */ + struct peak_pciec_card *pciec_card; /* only for PCIeC LEDs */ }; #define PEAK_PCI_CAN_CLOCK (16000000 / 2) @@ -61,16 +62,464 @@ struct peak_pci_chan { #define PEAK_PCI_VENDOR_ID 0x001C /* The PCI device and vendor IDs */ #define PEAK_PCI_DEVICE_ID 0x0001 /* for PCI/PCIe slot cards */ +#define PEAK_PCIEC_DEVICE_ID 0x0002 /* for ExpressCard slot cards */ +#define PEAK_PCIE_DEVICE_ID 0x0003 /* for nextgen PCIe slot cards */ +#define PEAK_MPCI_DEVICE_ID 0x0008 /* The miniPCI slot cards */ + +#define PEAK_PCI_CHAN_MAX 4 -static const u16 peak_pci_icr_masks[] = {0x02, 0x01, 0x40, 0x80}; +static const u16 peak_pci_icr_masks[PEAK_PCI_CHAN_MAX] = { + 0x02, 0x01, 0x40, 0x80 +}; static DEFINE_PCI_DEVICE_TABLE(peak_pci_tbl) = { {PEAK_PCI_VENDOR_ID, PEAK_PCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, + {PEAK_PCI_VENDOR_ID, PEAK_PCIE_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, + {PEAK_PCI_VENDOR_ID, PEAK_MPCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, +#ifdef CONFIG_CAN_PEAK_PCIEC + {PEAK_PCI_VENDOR_ID, PEAK_PCIEC_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, +#endif {0,} }; MODULE_DEVICE_TABLE(pci, peak_pci_tbl); +#ifdef CONFIG_CAN_PEAK_PCIEC +/* + * PCAN-ExpressCard needs I2C bit-banging configuration option. + */ + +/* GPIOICR byte access offsets */ +#define PITA_GPOUT 0x18 /* GPx output value */ +#define PITA_GPIN 0x19 /* GPx input value */ +#define PITA_GPOEN 0x1A /* configure GPx as ouput pin */ + +/* I2C GP bits */ +#define PITA_GPIN_SCL 0x01 /* Serial Clock Line */ +#define PITA_GPIN_SDA 0x04 /* Serial DAta line */ + +#define PCA9553_1_SLAVEADDR (0xC4 >> 1) + +/* PCA9553 LS0 fields values */ +enum { + PCA9553_LOW, + PCA9553_HIGHZ, + PCA9553_PWM0, + PCA9553_PWM1 +}; + +/* LEDs control */ +#define PCA9553_ON PCA9553_LOW +#define PCA9553_OFF PCA9553_HIGHZ +#define PCA9553_SLOW PCA9553_PWM0 +#define PCA9553_FAST PCA9553_PWM1 + +#define PCA9553_LED(c) (1 << (c)) +#define PCA9553_LED_STATE(s, c) ((s) << ((c) << 1)) + +#define PCA9553_LED_ON(c) PCA9553_LED_STATE(PCA9553_ON, c) +#define PCA9553_LED_OFF(c) PCA9553_LED_STATE(PCA9553_OFF, c) +#define PCA9553_LED_SLOW(c) PCA9553_LED_STATE(PCA9553_SLOW, c) +#define PCA9553_LED_FAST(c) PCA9553_LED_STATE(PCA9553_FAST, c) +#define PCA9553_LED_MASK(c) PCA9553_LED_STATE(0x03, c) + +#define PCA9553_LED_OFF_ALL (PCA9553_LED_OFF(0) | PCA9553_LED_OFF(1)) + +#define PCA9553_LS0_INIT 0x40 /* initial value (!= from 0x00) */ + +struct peak_pciec_chan { + struct net_device *netdev; + unsigned long prev_rx_bytes; + unsigned long prev_tx_bytes; +}; + +struct peak_pciec_card { + void __iomem *cfg_base; /* Common for all channels */ + void __iomem *reg_base; /* first channel base address */ + u8 led_cache; /* leds state cache */ + + /* PCIExpressCard i2c data */ + struct i2c_algo_bit_data i2c_bit; + struct i2c_adapter led_chip; + struct delayed_work led_work; /* led delayed work */ + int chan_count; + struct peak_pciec_chan channel[PEAK_PCI_CHAN_MAX]; +}; + +/* "normal" pci register write callback is overloaded for leds control */ +static void peak_pci_write_reg(const struct sja1000_priv *priv, + int port, u8 val); + +static inline void pita_set_scl_highz(struct peak_pciec_card *card) +{ + u8 gp_outen = readb(card->cfg_base + PITA_GPOEN) & ~PITA_GPIN_SCL; + writeb(gp_outen, card->cfg_base + PITA_GPOEN); +} + +static inline void pita_set_sda_highz(struct peak_pciec_card *card) +{ + u8 gp_outen = readb(card->cfg_base + PITA_GPOEN) & ~PITA_GPIN_SDA; + writeb(gp_outen, card->cfg_base + PITA_GPOEN); +} + +static void peak_pciec_init_pita_gpio(struct peak_pciec_card *card) +{ + /* raise SCL & SDA GPIOs to high-Z */ + pita_set_scl_highz(card); + pita_set_sda_highz(card); +} + +static void pita_setsda(void *data, int state) +{ + struct peak_pciec_card *card = (struct peak_pciec_card *)data; + u8 gp_out, gp_outen; + + /* set output sda always to 0 */ + gp_out = readb(card->cfg_base + PITA_GPOUT) & ~PITA_GPIN_SDA; + writeb(gp_out, card->cfg_base + PITA_GPOUT); + + /* control output sda with GPOEN */ + gp_outen = readb(card->cfg_base + PITA_GPOEN); + if (state) + gp_outen &= ~PITA_GPIN_SDA; + else + gp_outen |= PITA_GPIN_SDA; + + writeb(gp_outen, card->cfg_base + PITA_GPOEN); +} + +static void pita_setscl(void *data, int state) +{ + struct peak_pciec_card *card = (struct peak_pciec_card *)data; + u8 gp_out, gp_outen; + + /* set output scl always to 0 */ + gp_out = readb(card->cfg_base + PITA_GPOUT) & ~PITA_GPIN_SCL; + writeb(gp_out, card->cfg_base + PITA_GPOUT); + + /* control output scl with GPOEN */ + gp_outen = readb(card->cfg_base + PITA_GPOEN); + if (state) + gp_outen &= ~PITA_GPIN_SCL; + else + gp_outen |= PITA_GPIN_SCL; + + writeb(gp_outen, card->cfg_base + PITA_GPOEN); +} + +static int pita_getsda(void *data) +{ + struct peak_pciec_card *card = (struct peak_pciec_card *)data; + + /* set tristate */ + pita_set_sda_highz(card); + + return (readb(card->cfg_base + PITA_GPIN) & PITA_GPIN_SDA) ? 1 : 0; +} + +static int pita_getscl(void *data) +{ + struct peak_pciec_card *card = (struct peak_pciec_card *)data; + + /* set tristate */ + pita_set_scl_highz(card); + + return (readb(card->cfg_base + PITA_GPIN) & PITA_GPIN_SCL) ? 1 : 0; +} + +/* + * write commands to the LED chip though the I2C-bus of the PCAN-PCIeC + */ +static int peak_pciec_write_pca9553(struct peak_pciec_card *card, + u8 offset, u8 data) +{ + u8 buffer[2] = { + offset, + data + }; + struct i2c_msg msg = { + .addr = PCA9553_1_SLAVEADDR, + .len = 2, + .buf = buffer, + }; + int ret; + + /* cache led mask */ + if ((offset == 5) && (data == card->led_cache)) + return 0; + + ret = i2c_transfer(&card->led_chip, &msg, 1); + if (ret < 0) + return ret; + + if (offset == 5) + card->led_cache = data; + + return 0; +} + +/* + * delayed work callback used to control the LEDs + */ +static void peak_pciec_led_work(struct work_struct *work) +{ + struct peak_pciec_card *card = + container_of(work, struct peak_pciec_card, led_work.work); + struct net_device *netdev; + u8 new_led = card->led_cache; + int i, up_count = 0; + + /* first check what is to do */ + for (i = 0; i < card->chan_count; i++) { + /* default is: not configured */ + new_led &= ~PCA9553_LED_MASK(i); + new_led |= PCA9553_LED_ON(i); + + netdev = card->channel[i].netdev; + if (!netdev || !(netdev->flags & IFF_UP)) + continue; + + up_count++; + + /* no activity (but configured) */ + new_led &= ~PCA9553_LED_MASK(i); + new_led |= PCA9553_LED_SLOW(i); + + /* if bytes counters changed, set fast blinking led */ + if (netdev->stats.rx_bytes != card->channel[i].prev_rx_bytes) { + card->channel[i].prev_rx_bytes = netdev->stats.rx_bytes; + new_led &= ~PCA9553_LED_MASK(i); + new_led |= PCA9553_LED_FAST(i); + } + if (netdev->stats.tx_bytes != card->channel[i].prev_tx_bytes) { + card->channel[i].prev_tx_bytes = netdev->stats.tx_bytes; + new_led &= ~PCA9553_LED_MASK(i); + new_led |= PCA9553_LED_FAST(i); + } + } + + /* check if LS0 settings changed, only update i2c if so */ + peak_pciec_write_pca9553(card, 5, new_led); + + /* restart timer (except if no more configured channels) */ + if (up_count) + schedule_delayed_work(&card->led_work, HZ); +} + +/* + * set LEDs blinking state + */ +static void peak_pciec_set_leds(struct peak_pciec_card *card, u8 led_mask, u8 s) +{ + u8 new_led = card->led_cache; + int i; + + /* first check what is to do */ + for (i = 0; i < card->chan_count; i++) + if (led_mask & PCA9553_LED(i)) { + new_led &= ~PCA9553_LED_MASK(i); + new_led |= PCA9553_LED_STATE(s, i); + } + + /* check if LS0 settings changed, only update i2c if so */ + peak_pciec_write_pca9553(card, 5, new_led); +} + +/* + * start one second delayed work to control LEDs + */ +static void peak_pciec_start_led_work(struct peak_pciec_card *card) +{ + if (!delayed_work_pending(&card->led_work)) + schedule_delayed_work(&card->led_work, HZ); +} + +/* + * stop LEDs delayed work + */ +static void peak_pciec_stop_led_work(struct peak_pciec_card *card) +{ + cancel_delayed_work_sync(&card->led_work); +} + +/* + * initialize the PCA9553 4-bit I2C-bus LED chip + */ +static int peak_pciec_init_leds(struct peak_pciec_card *card) +{ + int err; + + /* prescaler for frequency 0: "SLOW" = 1 Hz = "44" */ + err = peak_pciec_write_pca9553(card, 1, 44 / 1); + if (err) + return err; + + /* duty cycle 0: 50% */ + err = peak_pciec_write_pca9553(card, 2, 0x80); + if (err) + return err; + + /* prescaler for frequency 1: "FAST" = 5 Hz */ + err = peak_pciec_write_pca9553(card, 3, 44 / 5); + if (err) + return err; + + /* duty cycle 1: 50% */ + err = peak_pciec_write_pca9553(card, 4, 0x80); + if (err) + return err; + + /* switch LEDs to initial state */ + return peak_pciec_write_pca9553(card, 5, PCA9553_LS0_INIT); +} + +/* + * restore LEDs state to off peak_pciec_leds_exit + */ +static void peak_pciec_leds_exit(struct peak_pciec_card *card) +{ + /* switch LEDs to off */ + peak_pciec_write_pca9553(card, 5, PCA9553_LED_OFF_ALL); +} + +/* + * normal write sja1000 register method overloaded to catch when controller + * is started or stopped, to control leds + */ +static void peak_pciec_write_reg(const struct sja1000_priv *priv, + int port, u8 val) +{ + struct peak_pci_chan *chan = priv->priv; + struct peak_pciec_card *card = chan->pciec_card; + int c = (priv->reg_base - card->reg_base) / PEAK_PCI_CHAN_SIZE; + + /* sja1000 register changes control the leds state */ + if (port == REG_MOD) + switch (val) { + case MOD_RM: + /* Reset Mode: set led on */ + peak_pciec_set_leds(card, PCA9553_LED(c), PCA9553_ON); + break; + case 0x00: + /* Normal Mode: led slow blinking and start led timer */ + peak_pciec_set_leds(card, PCA9553_LED(c), PCA9553_SLOW); + peak_pciec_start_led_work(card); + break; + default: + break; + } + + /* call base function */ + peak_pci_write_reg(priv, port, val); +} + +static struct i2c_algo_bit_data peak_pciec_i2c_bit_ops = { + .setsda = pita_setsda, + .setscl = pita_setscl, + .getsda = pita_getsda, + .getscl = pita_getscl, + .udelay = 10, + .timeout = HZ, +}; + +static int peak_pciec_probe(struct pci_dev *pdev, struct net_device *dev) +{ + struct sja1000_priv *priv = netdev_priv(dev); + struct peak_pci_chan *chan = priv->priv; + struct peak_pciec_card *card; + int err; + + /* copy i2c object address from 1st channel */ + if (chan->prev_dev) { + struct sja1000_priv *prev_priv = netdev_priv(chan->prev_dev); + struct peak_pci_chan *prev_chan = prev_priv->priv; + + card = prev_chan->pciec_card; + if (!card) + return -ENODEV; + + /* channel is the first one: do the init part */ + } else { + /* create the bit banging I2C adapter structure */ + card = kzalloc(sizeof(struct peak_pciec_card), GFP_KERNEL); + if (!card) { + dev_err(&pdev->dev, + "failed allocating memory for i2c chip\n"); + return -ENOMEM; + } + + card->cfg_base = chan->cfg_base; + card->reg_base = priv->reg_base; + + card->led_chip.owner = THIS_MODULE; + card->led_chip.dev.parent = &pdev->dev; + card->led_chip.algo_data = &card->i2c_bit; + strncpy(card->led_chip.name, "peak_i2c", + sizeof(card->led_chip.name)); + + card->i2c_bit = peak_pciec_i2c_bit_ops; + card->i2c_bit.udelay = 10; + card->i2c_bit.timeout = HZ; + card->i2c_bit.data = card; + + peak_pciec_init_pita_gpio(card); + + err = i2c_bit_add_bus(&card->led_chip); + if (err) { + dev_err(&pdev->dev, "i2c init failed\n"); + goto pciec_init_err_1; + } + + err = peak_pciec_init_leds(card); + if (err) { + dev_err(&pdev->dev, "leds hardware init failed\n"); + goto pciec_init_err_2; + } + + INIT_DELAYED_WORK(&card->led_work, peak_pciec_led_work); + /* PCAN-ExpressCard needs its own callback for leds */ + priv->write_reg = peak_pciec_write_reg; + } + + chan->pciec_card = card; + card->channel[card->chan_count++].netdev = dev; + + return 0; + +pciec_init_err_2: + i2c_del_adapter(&card->led_chip); + +pciec_init_err_1: + peak_pciec_init_pita_gpio(card); + kfree(card); + + return err; +} + +static void peak_pciec_remove(struct peak_pciec_card *card) +{ + peak_pciec_stop_led_work(card); + peak_pciec_leds_exit(card); + i2c_del_adapter(&card->led_chip); + peak_pciec_init_pita_gpio(card); + kfree(card); +} + +#else /* CONFIG_CAN_PEAK_PCIEC */ + +/* + * Placebo functions when PCAN-ExpressCard support is not selected + */ +static inline int peak_pciec_probe(struct pci_dev *pdev, struct net_device *dev) +{ + return -ENODEV; +} + +static inline void peak_pciec_remove(struct peak_pciec_card *card) +{ +} +#endif /* CONFIG_CAN_PEAK_PCIEC */ + static u8 peak_pci_read_reg(const struct sja1000_priv *priv, int port) { return readb(priv->reg_base + (port << 2)); @@ -188,17 +637,31 @@ static int __devinit peak_pci_probe(struct pci_dev *pdev, SET_NETDEV_DEV(dev, &pdev->dev); + /* Create chain of SJA1000 devices */ + chan->prev_dev = pci_get_drvdata(pdev); + pci_set_drvdata(pdev, dev); + + /* + * PCAN-ExpressCard needs some additional i2c init. + * This must be done *before* register_sja1000dev() but + * *after* devices linkage + */ + if (pdev->device == PEAK_PCIEC_DEVICE_ID) { + err = peak_pciec_probe(pdev, dev); + if (err) { + dev_err(&pdev->dev, + "failed to probe device (err %d)\n", + err); + goto failure_free_dev; + } + } + err = register_sja1000dev(dev); if (err) { dev_err(&pdev->dev, "failed to register device\n"); - free_sja1000dev(dev); - goto failure_remove_channels; + goto failure_free_dev; } - /* Create chain of SJA1000 devices */ - chan->prev_dev = pci_get_drvdata(pdev); - pci_set_drvdata(pdev, dev); - dev_info(&pdev->dev, "%s at reg_base=0x%p cfg_base=0x%p irq=%d\n", dev->name, priv->reg_base, chan->cfg_base, dev->irq); @@ -209,10 +672,15 @@ static int __devinit peak_pci_probe(struct pci_dev *pdev, return 0; +failure_free_dev: + pci_set_drvdata(pdev, chan->prev_dev); + free_sja1000dev(dev); + failure_remove_channels: /* Disable interrupts */ writew(0x0, cfg_base + PITA_ICR + 2); + chan = NULL; for (dev = pci_get_drvdata(pdev); dev; dev = chan->prev_dev) { unregister_sja1000dev(dev); free_sja1000dev(dev); @@ -220,6 +688,10 @@ failure_remove_channels: chan = priv->priv; } + /* free any PCIeC resources too */ + if (chan && chan->pciec_card) + peak_pciec_remove(chan->pciec_card); + pci_iounmap(pdev, reg_base); failure_unmap_cfg_base: @@ -251,8 +723,13 @@ static void __devexit peak_pci_remove(struct pci_dev *pdev) unregister_sja1000dev(dev); free_sja1000dev(dev); dev = chan->prev_dev; - if (!dev) + + if (!dev) { + /* do that only for first channel */ + if (chan->pciec_card) + peak_pciec_remove(chan->pciec_card); break; + } priv = netdev_priv(dev); chan = priv->priv; } |