summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorTimur Tabi <timur@freescale.com>2008-01-15 09:56:13 -0600
committerKumar Gala <galak@kernel.crashing.org>2008-01-23 19:34:12 -0600
commitd7584ed2b994a572326650b0c4d2c25961e6f49d (patch)
tree6de7ffefe6bf4394b3a10f5e87b3b6b0dd44d52d /drivers
parent845cf505cebd159b57b3ae3b25e9ad0eb036f9ab (diff)
downloadop-kernel-dev-d7584ed2b994a572326650b0c4d2c25961e6f49d.zip
op-kernel-dev-d7584ed2b994a572326650b0c4d2c25961e6f49d.tar.gz
[POWERPC] qe-uart: add support for Freescale QUICCEngine UART
Add file ucc_uart.c, a serial device driver for the Freescale QUICCEngine. Update the Kconfig and Makefile accordingly. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/serial/Kconfig10
-rw-r--r--drivers/serial/Makefile1
-rw-r--r--drivers/serial/ucc_uart.c1514
3 files changed, 1525 insertions, 0 deletions
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index d7e1996..d962b74 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -1284,4 +1284,14 @@ config SERIAL_OF_PLATFORM
Currently, only 8250 compatible ports are supported, but
others can easily be added.
+config SERIAL_QE
+ tristate "Freescale QUICC Engine serial port support"
+ depends on QUICC_ENGINE
+ select SERIAL_CORE
+ select FW_LOADER
+ default n
+ help
+ This driver supports the QE serial ports on Freescale embedded
+ PowerPC that contain a QUICC Engine.
+
endmenu
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index af6377d..7eb4553 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -64,3 +64,4 @@ obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o
obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
+obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
diff --git a/drivers/serial/ucc_uart.c b/drivers/serial/ucc_uart.c
new file mode 100644
index 0000000..e0994f0
--- /dev/null
+++ b/drivers/serial/ucc_uart.c
@@ -0,0 +1,1514 @@
+/*
+ * Freescale QUICC Engine UART device driver
+ *
+ * Author: Timur Tabi <timur@freescale.com>
+ *
+ * Copyright 2007 Freescale Semiconductor, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * This driver adds support for UART devices via Freescale's QUICC Engine
+ * found on some Freescale SOCs.
+ *
+ * If Soft-UART support is needed but not already present, then this driver
+ * will request and upload the "Soft-UART" microcode upon probe. The
+ * filename of the microcode should be fsl_qe_ucode_uart_X_YZ.bin, where "X"
+ * is the name of the SOC (e.g. 8323), and YZ is the revision of the SOC,
+ * (e.g. "11" for 1.1).
+ */
+
+#include <linux/module.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+#include <linux/dma-mapping.h>
+
+#include <linux/fs_uart_pd.h>
+#include <asm/ucc_slow.h>
+
+#include <linux/firmware.h>
+#include <asm/reg.h>
+
+/*
+ * The GUMR flag for Soft UART. This would normally be defined in qe.h,
+ * but Soft-UART is a hack and we want to keep everything related to it in
+ * this file.
+ */
+#define UCC_SLOW_GUMR_H_SUART 0x00004000 /* Soft-UART */
+
+/*
+ * soft_uart is 1 if we need to use Soft-UART mode
+ */
+static int soft_uart;
+/*
+ * firmware_loaded is 1 if the firmware has been loaded, 0 otherwise.
+ */
+static int firmware_loaded;
+
+/* Enable this macro to configure all serial ports in internal loopback
+ mode */
+/* #define LOOPBACK */
+
+/* The major and minor device numbers are defined in
+ * http://www.lanana.org/docs/device-list/devices-2.6+.txt. For the QE
+ * UART, we have major number 204 and minor numbers 46 - 49, which are the
+ * same as for the CPM2. This decision was made because no Freescale part
+ * has both a CPM and a QE.
+ */
+#define SERIAL_QE_MAJOR 204
+#define SERIAL_QE_MINOR 46
+
+/* Since we only have minor numbers 46 - 49, there is a hard limit of 4 ports */
+#define UCC_MAX_UART 4
+
+/* The number of buffer descriptors for receiving characters. */
+#define RX_NUM_FIFO 4
+
+/* The number of buffer descriptors for transmitting characters. */
+#define TX_NUM_FIFO 4
+
+/* The maximum size of the character buffer for a single RX BD. */
+#define RX_BUF_SIZE 32
+
+/* The maximum size of the character buffer for a single TX BD. */
+#define TX_BUF_SIZE 32
+
+/*
+ * The number of jiffies to wait after receiving a close command before the
+ * device is actually closed. This allows the last few characters to be
+ * sent over the wire.
+ */
+#define UCC_WAIT_CLOSING 100
+
+struct ucc_uart_pram {
+ struct ucc_slow_pram common;
+ u8 res1[8]; /* reserved */
+ __be16 maxidl; /* Maximum idle chars */
+ __be16 idlc; /* temp idle counter */
+ __be16 brkcr; /* Break count register */
+ __be16 parec; /* receive parity error counter */
+ __be16 frmec; /* receive framing error counter */
+ __be16 nosec; /* receive noise counter */
+ __be16 brkec; /* receive break condition counter */
+ __be16 brkln; /* last received break length */
+ __be16 uaddr[2]; /* UART address character 1 & 2 */
+ __be16 rtemp; /* Temp storage */
+ __be16 toseq; /* Transmit out of sequence char */
+ __be16 cchars[8]; /* control characters 1-8 */
+ __be16 rccm; /* receive control character mask */
+ __be16 rccr; /* receive control character register */
+ __be16 rlbc; /* receive last break character */
+ __be16 res2; /* reserved */
+ __be32 res3; /* reserved, should be cleared */
+ u8 res4; /* reserved, should be cleared */
+ u8 res5[3]; /* reserved, should be cleared */
+ __be32 res6; /* reserved, should be cleared */
+ __be32 res7; /* reserved, should be cleared */
+ __be32 res8; /* reserved, should be cleared */
+ __be32 res9; /* reserved, should be cleared */
+ __be32 res10; /* reserved, should be cleared */
+ __be32 res11; /* reserved, should be cleared */
+ __be32 res12; /* reserved, should be cleared */
+ __be32 res13; /* reserved, should be cleared */
+/* The rest is for Soft-UART only */
+ __be16 supsmr; /* 0x90, Shadow UPSMR */
+ __be16 res92; /* 0x92, reserved, initialize to 0 */
+ __be32 rx_state; /* 0x94, RX state, initialize to 0 */
+ __be32 rx_cnt; /* 0x98, RX count, initialize to 0 */
+ u8 rx_length; /* 0x9C, Char length, set to 1+CL+PEN+1+SL */
+ u8 rx_bitmark; /* 0x9D, reserved, initialize to 0 */
+ u8 rx_temp_dlst_qe; /* 0x9E, reserved, initialize to 0 */
+ u8 res14[0xBC - 0x9F]; /* reserved */
+ __be32 dump_ptr; /* 0xBC, Dump pointer */
+ __be32 rx_frame_rem; /* 0xC0, reserved, initialize to 0 */
+ u8 rx_frame_rem_size; /* 0xC4, reserved, initialize to 0 */
+ u8 tx_mode; /* 0xC5, mode, 0=AHDLC, 1=UART */
+ __be16 tx_state; /* 0xC6, TX state */
+ u8 res15[0xD0 - 0xC8]; /* reserved */
+ __be32 resD0; /* 0xD0, reserved, initialize to 0 */
+ u8 resD4; /* 0xD4, reserved, initialize to 0 */
+ __be16 resD5; /* 0xD5, reserved, initialize to 0 */
+} __attribute__ ((packed));
+
+/* SUPSMR definitions, for Soft-UART only */
+#define UCC_UART_SUPSMR_SL 0x8000
+#define UCC_UART_SUPSMR_RPM_MASK 0x6000
+#define UCC_UART_SUPSMR_RPM_ODD 0x0000
+#define UCC_UART_SUPSMR_RPM_LOW 0x2000
+#define UCC_UART_SUPSMR_RPM_EVEN 0x4000
+#define UCC_UART_SUPSMR_RPM_HIGH 0x6000
+#define UCC_UART_SUPSMR_PEN 0x1000
+#define UCC_UART_SUPSMR_TPM_MASK 0x0C00
+#define UCC_UART_SUPSMR_TPM_ODD 0x0000
+#define UCC_UART_SUPSMR_TPM_LOW 0x0400
+#define UCC_UART_SUPSMR_TPM_EVEN 0x0800
+#define UCC_UART_SUPSMR_TPM_HIGH 0x0C00
+#define UCC_UART_SUPSMR_FRZ 0x0100
+#define UCC_UART_SUPSMR_UM_MASK 0x00c0
+#define UCC_UART_SUPSMR_UM_NORMAL 0x0000
+#define UCC_UART_SUPSMR_UM_MAN_MULTI 0x0040
+#define UCC_UART_SUPSMR_UM_AUTO_MULTI 0x00c0
+#define UCC_UART_SUPSMR_CL_MASK 0x0030
+#define UCC_UART_SUPSMR_CL_8 0x0030
+#define UCC_UART_SUPSMR_CL_7 0x0020
+#define UCC_UART_SUPSMR_CL_6 0x0010
+#define UCC_UART_SUPSMR_CL_5 0x0000
+
+#define UCC_UART_TX_STATE_AHDLC 0x00
+#define UCC_UART_TX_STATE_UART 0x01
+#define UCC_UART_TX_STATE_X1 0x00
+#define UCC_UART_TX_STATE_X16 0x80
+
+#define UCC_UART_PRAM_ALIGNMENT 0x100
+
+#define UCC_UART_SIZE_OF_BD UCC_SLOW_SIZE_OF_BD
+#define NUM_CONTROL_CHARS 8
+
+/* Private per-port data structure */
+struct uart_qe_port {
+ struct uart_port port;
+ struct ucc_slow __iomem *uccp;
+ struct ucc_uart_pram __iomem *uccup;
+ struct ucc_slow_info us_info;
+ struct ucc_slow_private *us_private;
+ struct device_node *np;
+ unsigned int ucc_num; /* First ucc is 0, not 1 */
+
+ u16 rx_nrfifos;
+ u16 rx_fifosize;
+ u16 tx_nrfifos;
+ u16 tx_fifosize;
+ int wait_closing;
+ u32 flags;
+ struct qe_bd *rx_bd_base;
+ struct qe_bd *rx_cur;
+ struct qe_bd *tx_bd_base;
+ struct qe_bd *tx_cur;
+ unsigned char *tx_buf;
+ unsigned char *rx_buf;
+ void *bd_virt; /* virtual address of the BD buffers */
+ dma_addr_t bd_dma_addr; /* bus address of the BD buffers */
+ unsigned int bd_size; /* size of BD buffer space */
+};
+
+static struct uart_driver ucc_uart_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = "serial",
+ .dev_name = "ttyQE",
+ .major = SERIAL_QE_MAJOR,
+ .minor = SERIAL_QE_MINOR,
+ .nr = UCC_MAX_UART,
+};
+
+/*
+ * Virtual to physical address translation.
+ *
+ * Given the virtual address for a character buffer, this function returns
+ * the physical (DMA) equivalent.
+ */
+static inline dma_addr_t cpu2qe_addr(void *addr, struct uart_qe_port *qe_port)
+{
+ if (likely((addr >= qe_port->bd_virt)) &&
+ (addr < (qe_port->bd_virt + qe_port->bd_size)))
+ return qe_port->bd_dma_addr + (addr - qe_port->bd_virt);
+
+ /* something nasty happened */
+ printk(KERN_ERR "%s: addr=%p\n", __FUNCTION__, addr);
+ BUG();
+ return 0;
+}
+
+/*
+ * Physical to virtual address translation.
+ *
+ * Given the physical (DMA) address for a character buffer, this function
+ * returns the virtual equivalent.
+ */
+static inline void *qe2cpu_addr(dma_addr_t addr, struct uart_qe_port *qe_port)
+{
+ /* sanity check */
+ if (likely((addr >= qe_port->bd_dma_addr) &&
+ (addr < (qe_port->bd_dma_addr + qe_port->bd_size))))
+ return qe_port->bd_virt + (addr - qe_port->bd_dma_addr);
+
+ /* something nasty happened */
+ printk(KERN_ERR "%s: addr=%x\n", __FUNCTION__, addr);
+ BUG();
+ return NULL;
+}
+
+/*
+ * Return 1 if the QE is done transmitting all buffers for this port
+ *
+ * This function scans each BD in sequence. If we find a BD that is not
+ * ready (READY=1), then we return 0 indicating that the QE is still sending
+ * data. If we reach the last BD (WRAP=1), then we know we've scanned
+ * the entire list, and all BDs are done.
+ */
+static unsigned int qe_uart_tx_empty(struct uart_port *port)
+{
+ struct uart_qe_port *qe_port =
+ container_of(port, struct uart_qe_port, port);
+ struct qe_bd *bdp = qe_port->tx_bd_base;
+
+ while (1) {
+ if (in_be16(&bdp->status) & BD_SC_READY)
+ /* This BD is not done, so return "not done" */
+ return 0;
+
+ if (in_be16(&bdp->status) & BD_SC_WRAP)
+ /*
+ * This BD is done and it's the last one, so return
+ * "done"
+ */
+ return 1;
+
+ bdp++;
+ };
+}
+
+/*
+ * Set the modem control lines
+ *
+ * Although the QE can control the modem control lines (e.g. CTS), we
+ * don't need that support. This function must exist, however, otherwise
+ * the kernel will panic.
+ */
+void qe_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+}
+
+/*
+ * Get the current modem control line status
+ *
+ * Although the QE can control the modem control lines (e.g. CTS), this
+ * driver currently doesn't support that, so we always return Carrier
+ * Detect, Data Set Ready, and Clear To Send.
+ */
+static unsigned int qe_uart_get_mctrl(struct uart_port *port)
+{
+ return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
+}
+
+/*
+ * Disable the transmit interrupt.
+ *
+ * Although this function is called "stop_tx", it does not actually stop
+ * transmission of data. Instead, it tells the QE to not generate an
+ * interrupt when the UCC is finished sending characters.
+ */
+static void qe_uart_stop_tx(struct uart_port *port)
+{
+ struct uart_qe_port *qe_port =
+ container_of(port, struct uart_qe_port, port);
+
+ clrbits16(&qe_port->uccp->uccm, UCC_UART_UCCE_TX);
+}
+
+/*
+ * Transmit as many characters to the HW as possible.
+ *
+ * This function will attempt to stuff of all the characters from the
+ * kernel's transmit buffer into TX BDs.
+ *
+ * A return value of non-zero indicates that it sucessfully stuffed all
+ * characters from the kernel buffer.
+ *
+ * A return value of zero indicates that there are still characters in the
+ * kernel's buffer that have not been transmitted, but there are no more BDs
+ * available. This function should be called again after a BD has been made
+ * available.
+ */
+static int qe_uart_tx_pump(struct uart_qe_port *qe_port)
+{
+ struct qe_bd *bdp;
+ unsigned char *p;
+ unsigned int count;
+ struct uart_port *port = &qe_port->port;
+ struct circ_buf *xmit = &port->info->xmit;
+
+ bdp = qe_port->rx_cur;
+
+ /* Handle xon/xoff */
+ if (port->x_char) {
+ /* Pick next descriptor and fill from buffer */
+ bdp = qe_port->tx_cur;
+
+ p = qe2cpu_addr(bdp->buf, qe_port);
+
+ *p++ = port->x_char;
+ out_be16(&bdp->length, 1);
+ setbits16(&bdp->status, BD_SC_READY);
+ /* Get next BD. */
+ if (in_be16(&bdp->status) & BD_SC_WRAP)
+ bdp = qe_port->tx_bd_base;
+ else
+ bdp++;
+ qe_port->tx_cur = bdp;
+
+ port->icount.tx++;
+ port->x_char = 0;
+ return 1;
+ }
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ qe_uart_stop_tx(port);
+ return 0;
+ }
+
+ /* Pick next descriptor and fill from buffer */
+ bdp = qe_port->tx_cur;
+
+ while (!(in_be16(&bdp->status) & BD_SC_READY) &&
+ (xmit->tail != xmit->head)) {
+ count = 0;
+ p = qe2cpu_addr(bdp->buf, qe_port);
+ while (count < qe_port->tx_fifosize) {
+ *p++ = xmit->buf[xmit->tail];
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ count++;
+ if (xmit->head == xmit->tail)
+ break;
+ }
+
+ out_be16(&bdp->length, count);
+ setbits16(&bdp->status, BD_SC_READY);
+
+ /* Get next BD. */
+ if (in_be16(&bdp->status) & BD_SC_WRAP)
+ bdp = qe_port->tx_bd_base;
+ else
+ bdp++;
+ }
+ qe_port->tx_cur = bdp;
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ if (uart_circ_empty(xmit)) {
+ /* The kernel buffer is empty, so turn off TX interrupts. We
+ don't need to be told when the QE is finished transmitting
+ the data. */
+ qe_uart_stop_tx(port);
+ return 0;
+ }
+
+ return 1;
+}
+
+/*
+ * Start transmitting data
+ *
+ * This function will start transmitting any available data, if the port
+ * isn't already transmitting data.
+ */
+static void qe_uart_start_tx(struct uart_port *port)
+{
+ struct uart_qe_port *qe_port =
+ container_of(port, struct uart_qe_port, port);
+
+ /* If we currently are transmitting, then just return */
+ if (in_be16(&qe_port->uccp->uccm) & UCC_UART_UCCE_TX)
+ return;
+
+ /* Otherwise, pump the port and start transmission */
+ if (qe_uart_tx_pump(qe_port))
+ setbits16(&qe_port->uccp->uccm, UCC_UART_UCCE_TX);
+}
+
+/*
+ * Stop transmitting data
+ */
+static void qe_uart_stop_rx(struct uart_port *port)
+{
+ struct uart_qe_port *qe_port =
+ container_of(port, struct uart_qe_port, port);
+
+ clrbits16(&qe_port->uccp->uccm, UCC_UART_UCCE_RX);
+}
+
+/*
+ * Enable status change interrupts
+ *
+ * We don't support status change interrupts, but we need to define this
+ * function otherwise the kernel will panic.
+ */
+static void qe_uart_enable_ms(struct uart_port *port)
+{
+}
+
+/* Start or stop sending break signal
+ *
+ * This function controls the sending of a break signal. If break_state=1,
+ * then we start sending a break signal. If break_state=0, then we stop
+ * sending the break signal.
+ */
+static void qe_uart_break_ctl(struct uart_port *port, int break_state)
+{
+ struct uart_qe_port *qe_port =
+ container_of(port, struct uart_qe_port, port);
+
+ if (break_state)
+ ucc_slow_stop_tx(qe_port->us_private);
+ else
+ ucc_slow_restart_tx(qe_port->us_private);
+}
+
+/* ISR helper function for receiving character.
+ *
+ * This function is called by the ISR to handling receiving characters
+ */
+static void qe_uart_int_rx(struct uart_qe_port *qe_port)
+{
+ int i;
+ unsigned char ch, *cp;
+ struct uart_port *port = &qe_port->port;
+ struct tty_struct *tty = port->info->tty;
+ struct qe_bd *bdp;
+ u16 status;
+ unsigned int flg;
+
+ /* Just loop through the closed BDs and copy the characters into
+ * the buffer.
+ */
+ bdp = qe_port->rx_cur;
+ while (1) {
+ status = in_be16(&bdp->status);
+
+ /* If this one is empty, then we assume we've read them all */
+ if (status & BD_SC_EMPTY)
+ break;
+
+ /* get number of characters, and check space in RX buffer */
+ i = in_be16(&bdp->length);
+
+ /* If we don't have enough room in RX buffer for the entire BD,
+ * then we try later, which will be the next RX interrupt.
+ */
+ if (tty_buffer_request_room(tty, i) < i) {
+ dev_dbg(port->dev, "ucc-uart: no room in RX buffer\n");
+ return;
+ }
+
+ /* get pointer */
+ cp = qe2cpu_addr(bdp->buf, qe_port);
+
+ /* loop through the buffer */
+ while (i-- > 0) {
+ ch = *cp++;
+ port->icount.rx++;
+ flg = TTY_NORMAL;
+
+ if (!i && status &
+ (BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV))
+ goto handle_error;
+ if (uart_handle_sysrq_char(port, ch))
+ continue;
+
+error_return:
+ tty_insert_flip_char(tty, ch, flg);
+
+ }
+
+ /* This BD is ready to be used again. Clear status. get next */
+ clrsetbits_be16(&bdp->status, BD_SC_BR | BD_SC_FR | BD_SC_PR |
+ BD_SC_OV | BD_SC_ID, BD_SC_EMPTY);
+ if (in_be16(&bdp->status) & BD_SC_WRAP)
+ bdp = qe_port->rx_bd_base;
+ else
+ bdp++;
+
+ }
+
+ /* Write back buffer pointer */
+ qe_port->rx_cur = bdp;
+
+ /* Activate BH processing */
+ tty_flip_buffer_push(tty);
+
+ return;
+
+ /* Error processing */
+
+handle_error:
+ /* Statistics */
+ if (status & BD_SC_BR)
+ port->icount.brk++;
+ if (status & BD_SC_PR)
+ port->icount.parity++;
+ if (status & BD_SC_FR)
+ port->icount.frame++;
+ if (status & BD_SC_OV)
+ port->icount.overrun++;
+
+ /* Mask out ignored conditions */
+ status &= port->read_status_mask;
+
+ /* Handle the remaining ones */
+ if (status & BD_SC_BR)
+ flg = TTY_BREAK;
+ else if (status & BD_SC_PR)
+ flg = TTY_PARITY;
+ else if (status & BD_SC_FR)
+ flg = TTY_FRAME;
+
+ /* Overrun does not affect the current character ! */
+ if (status & BD_SC_OV)
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+#ifdef SUPPORT_SYSRQ
+ port->sysrq = 0;
+#endif
+ goto error_return;
+}
+
+/* Interrupt handler
+ *
+ * This interrupt handler is called after a BD is processed.
+ */
+static irqreturn_t qe_uart_int(int irq, void *data)
+{
+ struct uart_qe_port *qe_port = (struct uart_qe_port *) data;
+ struct ucc_slow __iomem *uccp = qe_port->uccp;
+ u16 events;
+
+ /* Clear the interrupts */
+ events = in_be16(&uccp->ucce);
+ out_be16(&uccp->ucce, events);
+
+ if (events & UCC_UART_UCCE_BRKE)
+ uart_handle_break(&qe_port->port);
+
+ if (events & UCC_UART_UCCE_RX)
+ qe_uart_int_rx(qe_port);
+
+ if (events & UCC_UART_UCCE_TX)
+ qe_uart_tx_pump(qe_port);
+
+ return events ? IRQ_HANDLED : IRQ_NONE;
+}
+
+/* Initialize buffer descriptors
+ *
+ * This function initializes all of the RX and TX buffer descriptors.
+ */
+static void qe_uart_initbd(struct uart_qe_port *qe_port)
+{
+ int i;
+ void *bd_virt;
+ struct qe_bd *bdp;
+
+ /* Set the physical address of the host memory buffers in the buffer
+ * descriptors, and the virtual address for us to work with.
+ */
+ bd_virt = qe_port->bd_virt;
+ bdp = qe_port->rx_bd_base;
+ qe_port->rx_cur = qe_port->rx_bd_base;
+ for (i = 0; i < (qe_port->rx_nrfifos - 1); i++) {
+ out_be16(&bdp->status, BD_SC_EMPTY | BD_SC_INTRPT);
+ out_be32(&bdp->buf, cpu2qe_addr(bd_virt, qe_port));
+ out_be16(&bdp->length, 0);
+ bd_virt += qe_port->rx_fifosize;
+ bdp++;
+ }
+
+ /* */
+ out_be16(&bdp->status, BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT);
+ out_be32(&bdp->buf, cpu2qe_addr(bd_virt, qe_port));
+ out_be16(&bdp->length, 0);
+
+ /* Set the physical address of the host memory
+ * buffers in the buffer descriptors, and the
+ * virtual address for us to work with.
+ */
+ bd_virt = qe_port->bd_virt +
+ L1_CACHE_ALIGN(qe_port->rx_nrfifos * qe_port->rx_fifosize);
+ qe_port->tx_cur = qe_port->tx_bd_base;
+ bdp = qe_port->tx_bd_base;
+ for (i = 0; i < (qe_port->tx_nrfifos - 1); i++) {
+ out_be16(&bdp->status, BD_SC_INTRPT);
+ out_be32(&bdp->buf, cpu2qe_addr(bd_virt, qe_port));
+ out_be16(&bdp->length, 0);
+ bd_virt += qe_port->tx_fifosize;
+ bdp++;
+ }
+
+ /* Loopback requires the preamble bit to be set on the first TX BD */
+#ifdef LOOPBACK
+ setbits16(&qe_port->tx_cur->status, BD_SC_P);
+#endif
+
+ out_be16(&bdp->status, BD_SC_WRAP | BD_SC_INTRPT);
+ out_be32(&bdp->buf, cpu2qe_addr(bd_virt, qe_port));
+ out_be16(&bdp->length, 0);
+}
+
+/*
+ * Initialize a UCC for UART.
+ *
+ * This function configures a given UCC to be used as a UART device. Basic
+ * UCC initialization is handled in qe_uart_request_port(). This function
+ * does all the UART-specific stuff.
+ */
+static void qe_uart_init_ucc(struct uart_qe_port *qe_port)
+{
+ u32 cecr_subblock;
+ struct ucc_slow __iomem *uccp = qe_port->uccp;
+ struct ucc_uart_pram *uccup = qe_port->uccup;
+
+ unsigned int i;
+
+ /* First, disable TX and RX in the UCC */
+ ucc_slow_disable(qe_port->us_private, COMM_DIR_RX_AND_TX);
+
+ /* Program the UCC UART parameter RAM */
+ out_8(&uccup->common.rbmr, UCC_BMR_GBL | UCC_BMR_BO_BE);
+ out_8(&uccup->common.tbmr, UCC_BMR_GBL | UCC_BMR_BO_BE);
+ out_be16(&uccup->common.mrblr, qe_port->rx_fifosize);
+ out_be16(&uccup->maxidl, 0x10);
+ out_be16(&uccup->brkcr, 1);
+ out_be16(&uccup->parec, 0);
+ out_be16(&uccup->frmec, 0);
+ out_be16(&uccup->nosec, 0);
+ out_be16(&uccup->brkec, 0);
+ out_be16(&uccup->uaddr[0], 0);
+ out_be16(&uccup->uaddr[1], 0);
+ out_be16(&uccup->toseq, 0);
+ for (i = 0; i < 8; i++)
+ out_be16(&uccup->cchars[i], 0xC000);
+ out_be16(&uccup->rccm, 0xc0ff);
+
+ /* Configure the GUMR registers for UART */
+ if (soft_uart)
+ /* Soft-UART requires a 1X multiplier for TX */
+ clrsetbits_be32(&uccp->gumr_l,
+ UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK |
+ UCC_SLOW_GUMR_L_RDCR_MASK,
+ UCC_SLOW_GUMR_L_MODE_UART | UCC_SLOW_GUMR_L_TDCR_1 |
+ UCC_SLOW_GUMR_L_RDCR_16);
+ else
+ clrsetbits_be32(&uccp->gumr_l,
+ UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK |
+ UCC_SLOW_GUMR_L_RDCR_MASK,
+ UCC_SLOW_GUMR_L_MODE_UART | UCC_SLOW_GUMR_L_TDCR_16 |
+ UCC_SLOW_GUMR_L_RDCR_16);
+
+ clrsetbits_be32(&uccp->gumr_h, UCC_SLOW_GUMR_H_RFW,
+ UCC_SLOW_GUMR_H_TRX | UCC_SLOW_GUMR_H_TTX);
+
+#ifdef LOOPBACK
+ clrsetbits_be32(&uccp->gumr_l, UCC_SLOW_GUMR_L_DIAG_MASK,
+ UCC_SLOW_GUMR_L_DIAG_LOOP);
+ clrsetbits_be32(&uccp->gumr_h,
+ UCC_SLOW_GUMR_H_CTSP | UCC_SLOW_GUMR_H_RSYN,
+ UCC_SLOW_GUMR_H_CDS);
+#endif
+
+ /* Enable rx interrupts and clear all pending events. */
+ out_be16(&uccp->uccm, 0);
+ out_be16(&uccp->ucce, 0xffff);
+ out_be16(&uccp->udsr, 0x7e7e);
+
+ /* Initialize UPSMR */
+ out_be16(&uccp->upsmr, 0);
+
+ if (soft_uart) {
+ out_be16(&uccup->supsmr, 0x30);
+ out_be16(&uccup->res92, 0);
+ out_be32(&uccup->rx_state, 0);
+ out_be32(&uccup->rx_cnt, 0);
+ out_8(&uccup->rx_bitmark, 0);
+ out_8(&uccup->rx_length, 10);
+ out_be32(&uccup->dump_ptr, 0x4000);
+ out_8(&uccup->rx_temp_dlst_qe, 0);
+ out_be32(&uccup->rx_frame_rem, 0);
+ out_8(&uccup->rx_frame_rem_size, 0);
+ /* Soft-UART requires TX to be 1X */
+ out_8(&uccup->tx_mode,
+ UCC_UART_TX_STATE_UART | UCC_UART_TX_STATE_X1);
+ out_be16(&uccup->tx_state, 0);
+ out_8(&uccup->resD4, 0);
+ out_be16(&uccup->resD5, 0);
+
+ /* Set UART mode.
+ * Enable receive and transmit.
+ */
+
+ /* From the microcode errata:
+ * 1.GUMR_L register, set mode=0010 (QMC).
+ * 2.Set GUMR_H[17] bit. (UART/AHDLC mode).
+ * 3.Set GUMR_H[19:20] (Transparent mode)
+ * 4.Clear GUMR_H[26] (RFW)
+ * ...
+ * 6.Receiver must use 16x over sampling
+ */
+ clrsetbits_be32(&uccp->gumr_l,
+ UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK |
+ UCC_SLOW_GUMR_L_RDCR_MASK,
+ UCC_SLOW_GUMR_L_MODE_QMC | UCC_SLOW_GUMR_L_TDCR_16 |
+ UCC_SLOW_GUMR_L_RDCR_16);
+
+ clrsetbits_be32(&uccp->gumr_h,
+ UCC_SLOW_GUMR_H_RFW | UCC_SLOW_GUMR_H_RSYN,
+ UCC_SLOW_GUMR_H_SUART | UCC_SLOW_GUMR_H_TRX |
+ UCC_SLOW_GUMR_H_TTX | UCC_SLOW_GUMR_H_TFL);
+
+#ifdef LOOPBACK
+ clrsetbits_be32(&uccp->gumr_l, UCC_SLOW_GUMR_L_DIAG_MASK,
+ UCC_SLOW_GUMR_L_DIAG_LOOP);
+ clrbits32(&uccp->gumr_h, UCC_SLOW_GUMR_H_CTSP |
+ UCC_SLOW_GUMR_H_CDS);
+#endif
+
+ cecr_subblock = ucc_slow_get_qe_cr_subblock(qe_port->ucc_num);
+ qe_issue_cmd(QE_INIT_TX_RX, cecr_subblock,
+ QE_CR_PROTOCOL_UNSPECIFIED, 0);
+ }
+}
+
+/*
+ * Initialize the port.
+ */
+static int qe_uart_startup(struct uart_port *port)
+{
+ struct uart_qe_port *qe_port =
+ container_of(port, struct uart_qe_port, port);
+ int ret;
+
+ /*
+ * If we're using Soft-UART mode, then we need to make sure the
+ * firmware has been uploaded first.
+ */
+ if (soft_uart && !firmware_loaded) {
+ dev_err(port->dev, "Soft-UART firmware not uploaded\n");
+ return -ENODEV;
+ }
+
+ qe_uart_initbd(qe_port);
+ qe_uart_init_ucc(qe_port);
+
+ /* Install interrupt handler. */
+ ret = request_irq(port->irq, qe_uart_int, IRQF_SHARED, "ucc-uart",
+ qe_port);
+ if (ret) {
+ dev_err(port->dev, "could not claim IRQ %u\n", port->irq);
+ return ret;
+ }
+
+ /* Startup rx-int */
+ setbits16(&qe_port->uccp->uccm, UCC_UART_UCCE_RX);
+ ucc_slow_enable(qe_port->us_private, COMM_DIR_RX_AND_TX);
+
+ return 0;
+}
+
+/*
+ * Shutdown the port.
+ */
+static void qe_uart_shutdown(struct uart_port *port)
+{
+ struct uart_qe_port *qe_port =
+ container_of(port, struct uart_qe_port, port);
+ struct ucc_slow __iomem *uccp = qe_port->uccp;
+ unsigned int timeout = 20;
+
+ /* Disable RX and TX */
+
+ /* Wait for all the BDs marked sent */
+ while (!qe_uart_tx_empty(port)) {
+ if (!--timeout) {
+ dev_warn(port->dev, "shutdown timeout\n");
+ break;
+ }
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(2);
+ }
+
+ if (qe_port->wait_closing) {
+ /* Wait a bit longer */
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(qe_port->wait_closing);
+ }
+
+ /* Stop uarts */
+ ucc_slow_disable(qe_port->us_private, COMM_DIR_RX_AND_TX);
+ clrbits16(&uccp->uccm, UCC_UART_UCCE_TX | UCC_UART_UCCE_RX);
+
+ /* Shut them really down and reinit buffer descriptors */
+ ucc_slow_graceful_stop_tx(qe_port->us_private);
+ qe_uart_initbd(qe_port);
+
+ free_irq(port->irq, qe_port);
+}
+
+/*
+ * Set the serial port parameters.
+ */
+static void qe_uart_set_termios(struct uart_port *port,
+ struct ktermios *termios, struct ktermios *old)
+{
+ struct uart_qe_port *qe_port =
+ container_of(port, struct uart_qe_port, port);
+ struct ucc_slow __iomem *uccp = qe_port->uccp;
+ unsigned int baud;
+ unsigned long flags;
+ u16 upsmr = in_be16(&uccp->upsmr);
+ struct ucc_uart_pram __iomem *uccup = qe_port->uccup;
+ u16 supsmr = in_be16(&uccup->supsmr);
+ u8 char_length = 2; /* 1 + CL + PEN + 1 + SL */
+
+ /* Character length programmed into the mode register is the
+ * sum of: 1 start bit, number of data bits, 0 or 1 parity bit,
+ * 1 or 2 stop bits, minus 1.
+ * The value 'bits' counts this for us.
+ */
+
+ /* byte size */
+ upsmr &= UCC_UART_UPSMR_CL_MASK;
+ supsmr &= UCC_UART_SUPSMR_CL_MASK;
+
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ upsmr |= UCC_UART_UPSMR_CL_5;
+ supsmr |= UCC_UART_SUPSMR_CL_5;
+ char_length += 5;
+ break;
+ case CS6:
+ upsmr |= UCC_UART_UPSMR_CL_6;
+ supsmr |= UCC_UART_SUPSMR_CL_6;
+ char_length += 6;
+ break;
+ case CS7:
+ upsmr |= UCC_UART_UPSMR_CL_7;
+ supsmr |= UCC_UART_SUPSMR_CL_7;
+ char_length += 7;
+ break;
+ default: /* case CS8 */
+ upsmr |= UCC_UART_UPSMR_CL_8;
+ supsmr |= UCC_UART_SUPSMR_CL_8;
+ char_length += 8;
+ break;
+ }
+
+ /* If CSTOPB is set, we want two stop bits */
+ if (termios->c_cflag & CSTOPB) {
+ upsmr |= UCC_UART_UPSMR_SL;
+ supsmr |= UCC_UART_SUPSMR_SL;
+ char_length++; /* + SL */
+ }
+
+ if (termios->c_cflag & PARENB) {
+ upsmr |= UCC_UART_UPSMR_PEN;
+ supsmr |= UCC_UART_SUPSMR_PEN;
+ char_length++; /* + PEN */
+
+ if (!(termios->c_cflag & PARODD)) {
+ upsmr &= ~(UCC_UART_UPSMR_RPM_MASK |
+ UCC_UART_UPSMR_TPM_MASK);
+ upsmr |= UCC_UART_UPSMR_RPM_EVEN |
+ UCC_UART_UPSMR_TPM_EVEN;
+ supsmr &= ~(UCC_UART_SUPSMR_RPM_MASK |
+ UCC_UART_SUPSMR_TPM_MASK);
+ supsmr |= UCC_UART_SUPSMR_RPM_EVEN |
+ UCC_UART_SUPSMR_TPM_EVEN;
+ }
+ }
+
+ /*
+ * Set up parity check flag
+ */
+ port->read_status_mask = BD_SC_EMPTY | BD_SC_OV;
+ if (termios->c_iflag & INPCK)
+ port->read_status_mask |= BD_SC_FR | BD_SC_PR;
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ port->read_status_mask |= BD_SC_BR;
+
+ /*
+ * Characters to ignore
+ */
+ port->ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= BD_SC_PR | BD_SC_FR;
+ if (termios->c_iflag & IGNBRK) {
+ port->ignore_status_mask |= BD_SC_BR;
+ /*
+ * If we're ignore parity and break indicators, ignore
+ * overruns too. (For real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= BD_SC_OV;
+ }
+ /*
+ * !!! ignore all characters if CREAD is not set
+ */
+ if ((termios->c_cflag & CREAD) == 0)
+ port->read_status_mask &= ~BD_SC_EMPTY;
+
+ baud = uart_get_baud_rate(port, termios, old, 0, 115200);
+
+ /* Do we really need a spinlock here? */
+ spin_lock_irqsave(&port->lock, flags);
+
+ out_be16(&uccp->upsmr, upsmr);
+ if (soft_uart) {
+ out_be16(&uccup->supsmr, supsmr);
+ out_8(&uccup->rx_length, char_length);
+
+ /* Soft-UART requires a 1X multiplier for TX */
+ qe_setbrg(qe_port->us_info.rx_clock, baud, 16);
+ qe_setbrg(qe_port->us_info.tx_clock, baud, 1);
+ } else {
+ qe_setbrg(qe_port->us_info.rx_clock, baud, 16);
+ qe_setbrg(qe_port->us_info.tx_clock, baud, 16);
+ }
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+/*
+ * Return a pointer to a string that describes what kind of port this is.
+ */
+static const char *qe_uart_type(struct uart_port *port)
+{
+ return "QE";
+}
+
+/*
+ * Allocate any memory and I/O resources required by the port.
+ */
+static int qe_uart_request_port(struct uart_port *port)
+{
+ int ret;
+ struct uart_qe_port *qe_port =
+ container_of(port, struct uart_qe_port, port);
+ struct ucc_slow_info *us_info = &qe_port->us_info;
+ struct ucc_slow_private *uccs;
+ unsigned int rx_size, tx_size;
+ void *bd_virt;
+ dma_addr_t bd_dma_addr = 0;
+
+ ret = ucc_slow_init(us_info, &uccs);
+ if (ret) {
+ dev_err(port->dev, "could not initialize UCC%u\n",
+ qe_port->ucc_num);
+ return ret;
+ }
+
+ qe_port->us_private = uccs;
+ qe_port->uccp = uccs->us_regs;
+ qe_port->uccup = (struct ucc_uart_pram *) uccs->us_pram;
+ qe_port->rx_bd_base = uccs->rx_bd;
+ qe_port->tx_bd_base = uccs->tx_bd;
+
+ /*
+ * Allocate the transmit and receive data buffers.
+ */
+
+ rx_size = L1_CACHE_ALIGN(qe_port->rx_nrfifos * qe_port->rx_fifosize);
+ tx_size = L1_CACHE_ALIGN(qe_port->tx_nrfifos * qe_port->tx_fifosize);
+
+ bd_virt = dma_alloc_coherent(NULL, rx_size + tx_size, &bd_dma_addr,
+ GFP_KERNEL);
+ if (!bd_virt) {
+ dev_err(port->dev, "could not allocate buffer descriptors\n");
+ return -ENOMEM;
+ }
+
+ qe_port->bd_virt = bd_virt;
+ qe_port->bd_dma_addr = bd_dma_addr;
+ qe_port->bd_size = rx_size + tx_size;
+
+ qe_port->rx_buf = bd_virt;
+ qe_port->tx_buf = qe_port->rx_buf + rx_size;
+
+ return 0;
+}
+
+/*
+ * Configure the port.
+ *
+ * We say we're a CPM-type port because that's mostly true. Once the device
+ * is configured, this driver operates almost identically to the CPM serial
+ * driver.
+ */
+static void qe_uart_config_port(struct uart_port *port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE) {
+ port->type = PORT_CPM;
+ qe_uart_request_port(port);
+ }
+}
+
+/*
+ * Release any memory and I/O resources that were allocated in
+ * qe_uart_request_port().
+ */
+static void qe_uart_release_port(struct uart_port *port)
+{
+ struct uart_qe_port *qe_port =
+ container_of(port, struct uart_qe_port, port);
+ struct ucc_slow_private *uccs = qe_port->us_private;
+
+ dma_free_coherent(NULL, qe_port->bd_size, qe_port->bd_virt,
+ qe_port->bd_dma_addr);
+
+ ucc_slow_free(uccs);
+}
+
+/*
+ * Verify that the data in serial_struct is suitable for this device.
+ */
+static int qe_uart_verify_port(struct uart_port *port,
+ struct serial_struct *ser)
+{
+ if (ser->type != PORT_UNKNOWN && ser->type != PORT_CPM)
+ return -EINVAL;
+
+ if (ser->irq < 0 || ser->irq >= NR_IRQS)
+ return -EINVAL;
+
+ if (ser->baud_base < 9600)
+ return -EINVAL;
+
+ return 0;
+}
+/* UART operations
+ *
+ * Details on these functions can be found in Documentation/serial/driver
+ */
+static struct uart_ops qe_uart_pops = {
+ .tx_empty = qe_uart_tx_empty,
+ .set_mctrl = qe_uart_set_mctrl,
+ .get_mctrl = qe_uart_get_mctrl,
+ .stop_tx = qe_uart_stop_tx,
+ .start_tx = qe_uart_start_tx,
+ .stop_rx = qe_uart_stop_rx,
+ .enable_ms = qe_uart_enable_ms,
+ .break_ctl = qe_uart_break_ctl,
+ .startup = qe_uart_startup,
+ .shutdown = qe_uart_shutdown,
+ .set_termios = qe_uart_set_termios,
+ .type = qe_uart_type,
+ .release_port = qe_uart_release_port,
+ .request_port = qe_uart_request_port,
+ .config_port = qe_uart_config_port,
+ .verify_port = qe_uart_verify_port,
+};
+
+/*
+ * Obtain the SOC model number and revision level
+ *
+ * This function parses the device tree to obtain the SOC model. It then
+ * reads the SVR register to the revision.
+ *
+ * The device tree stores the SOC model two different ways.
+ *
+ * The new way is:
+ *
+ * cpu@0 {
+ * compatible = "PowerPC,8323";
+ * device_type = "cpu";
+ * ...
+ *
+ *
+ * The old way is:
+ * PowerPC,8323@0 {
+ * device_type = "cpu";
+ * ...
+ *
+ * This code first checks the new way, and then the old way.
+ */
+static unsigned int soc_info(unsigned int *rev_h, unsigned int *rev_l)
+{
+ struct device_node *np;
+ const char *soc_string;
+ unsigned int svr;
+ unsigned int soc;
+
+ /* Find the CPU node */
+ np = of_find_node_by_type(NULL, "cpu");
+ if (!np)
+ return 0;
+ /* Find the compatible property */
+ soc_string = of_get_property(np, "compatible", NULL);
+ if (!soc_string)
+ /* No compatible property, so try the name. */
+ soc_string = np->name;
+
+ /* Extract the SOC number from the "PowerPC," string */
+ if ((sscanf(soc_string, "PowerPC,%u", &soc) != 1) || !soc)
+ return 0;
+
+ /* Get the revision from the SVR */
+ svr = mfspr(SPRN_SVR);
+ *rev_h = (svr >> 4) & 0xf;
+ *rev_l = svr & 0xf;
+
+ return soc;
+}
+
+/*
+ * requst_firmware_nowait() callback function
+ *
+ * This function is called by the kernel when a firmware is made available,
+ * or if it times out waiting for the firmware.
+ */
+static void uart_firmware_cont(const struct firmware *fw, void *context)
+{
+ struct qe_firmware *firmware;
+ struct device *dev = context;
+ int ret;
+
+ if (!fw) {
+ dev_err(dev, "firmware not found\n");
+ return;
+ }
+
+ firmware = (struct qe_firmware *) fw->data;
+
+ if (firmware->header.length != fw->size) {
+ dev_err(dev, "invalid firmware\n");
+ return;
+ }
+
+ ret = qe_upload_firmware(firmware);
+ if (ret) {
+ dev_err(dev, "could not load firmware\n");
+ return;
+ }
+
+ firmware_loaded = 1;
+}
+
+static int ucc_uart_probe(struct of_device *ofdev,
+ const struct of_device_id *match)
+{
+ struct device_node *np = ofdev->node;
+ const unsigned int *iprop; /* Integer OF properties */
+ const char *sprop; /* String OF properties */
+ struct uart_qe_port *qe_port = NULL;
+ struct resource res;
+ int ret;
+
+ /*
+ * Determine if we need Soft-UART mode
+ */
+ if (of_find_property(np, "soft-uart", NULL)) {
+ dev_dbg(&ofdev->dev, "using Soft-UART mode\n");
+ soft_uart = 1;
+ }
+
+ /*
+ * If we are using Soft-UART, determine if we need to upload the
+ * firmware, too.
+ */
+ if (soft_uart) {
+ struct qe_firmware_info *qe_fw_info;
+
+ qe_fw_info = qe_get_firmware_info();
+
+ /* Check if the firmware has been uploaded. */
+ if (qe_fw_info && strstr(qe_fw_info->id, "Soft-UART")) {
+ firmware_loaded = 1;
+ } else {
+ char filename[32];
+ unsigned int soc;
+ unsigned int rev_h;
+ unsigned int rev_l;
+
+ soc = soc_info(&rev_h, &rev_l);
+ if (!soc) {
+ dev_err(&ofdev->dev, "unknown CPU model\n");
+ return -ENXIO;
+ }
+ sprintf(filename, "fsl_qe_ucode_uart_%u_%u%u.bin",
+ soc, rev_h, rev_l);
+
+ dev_info(&ofdev->dev, "waiting for firmware %s\n",
+ filename);
+
+ /*
+ * We call request_firmware_nowait instead of
+ * request_firmware so that the driver can load and
+ * initialize the ports without holding up the rest of
+ * the kernel. If hotplug support is enabled in the
+ * kernel, then we use it.
+ */
+ ret = request_firmware_nowait(THIS_MODULE,
+ FW_ACTION_HOTPLUG, filename, &ofdev->dev,
+ &ofdev->dev, uart_firmware_cont);
+ if (ret) {
+ dev_err(&ofdev->dev,
+ "could not load firmware %s\n",
+ filename);
+ return ret;
+ }
+ }
+ }
+
+ qe_port = kzalloc(sizeof(struct uart_qe_port), GFP_KERNEL);
+ if (!qe_port) {
+ dev_err(&ofdev->dev, "can't allocate QE port structure\n");
+ return -ENOMEM;
+ }
+
+ /* Search for IRQ and mapbase */
+ ret = of_address_to_resource(np, 0, &res);
+ if (ret) {
+ dev_err(&ofdev->dev, "missing 'reg' property in device tree\n");
+ kfree(qe_port);
+ return ret;
+ }
+ if (!res.start) {
+ dev_err(&ofdev->dev, "invalid 'reg' property in device tree\n");
+ kfree(qe_port);
+ return -EINVAL;
+ }
+ qe_port->port.mapbase = res.start;
+
+ /* Get the UCC number (device ID) */
+ /* UCCs are numbered 1-7 */
+ iprop = of_get_property(np, "device-id", NULL);
+ if (!iprop || (*iprop < 1) || (*iprop > UCC_MAX_NUM)) {
+ dev_err(&ofdev->dev,
+ "missing or invalid UCC specified in device tree\n");
+ kfree(qe_port);
+ return -ENODEV;
+ }
+ qe_port->ucc_num = *iprop - 1;
+
+ /*
+ * In the future, we should not require the BRG to be specified in the
+ * device tree. If no clock-source is specified, then just pick a BRG
+ * to use. This requires a new QE library function that manages BRG
+ * assignments.
+ */
+
+ sprop = of_get_property(np, "rx-clock-name", NULL);
+ if (!sprop) {
+ dev_err(&ofdev->dev, "missing rx-clock-name in device tree\n");
+ kfree(qe_port);
+ return -ENODEV;
+ }
+
+ qe_port->us_info.rx_clock = qe_clock_source(sprop);
+ if ((qe_port->us_info.rx_clock < QE_BRG1) ||
+ (qe_port->us_info.rx_clock > QE_BRG16)) {
+ dev_err(&ofdev->dev, "rx-clock-name must be a BRG for UART\n");
+ kfree(qe_port);
+ return -ENODEV;
+ }
+
+#ifdef LOOPBACK
+ /* In internal loopback mode, TX and RX must use the same clock */
+ qe_port->us_info.tx_clock = qe_port->us_info.rx_clock;
+#else
+ sprop = of_get_property(np, "tx-clock-name", NULL);
+ if (!sprop) {
+ dev_err(&ofdev->dev, "missing tx-clock-name in device tree\n");
+ kfree(qe_port);
+ return -ENODEV;
+ }
+ qe_port->us_info.tx_clock = qe_clock_source(sprop);
+#endif
+ if ((qe_port->us_info.tx_clock < QE_BRG1) ||
+ (qe_port->us_info.tx_clock > QE_BRG16)) {
+ dev_err(&ofdev->dev, "tx-clock-name must be a BRG for UART\n");
+ kfree(qe_port);
+ return -ENODEV;
+ }
+
+ /* Get the port number, numbered 0-3 */
+ iprop = of_get_property(np, "port-number", NULL);
+ if (!iprop) {
+ dev_err(&ofdev->dev, "missing port-number in device tree\n");
+ kfree(qe_port);
+ return -EINVAL;
+ }
+ qe_port->port.line = *iprop;
+ if (qe_port->port.line >= UCC_MAX_UART) {
+ dev_err(&ofdev->dev, "port-number must be 0-%u\n",
+ UCC_MAX_UART - 1);
+ kfree(qe_port);
+ return -EINVAL;
+ }
+
+ qe_port->port.irq = irq_of_parse_and_map(np, 0);
+ if (qe_port->port.irq == NO_IRQ) {
+ dev_err(&ofdev->dev, "could not map IRQ for UCC%u\n",
+ qe_port->ucc_num + 1);
+ kfree(qe_port);
+ return -EINVAL;
+ }
+
+ /*
+ * Newer device trees have an "fsl,qe" compatible property for the QE
+ * node, but we still need to support older device trees.
+ */
+ np = of_find_compatible_node(NULL, NULL, "fsl,qe");
+ if (!np) {
+ np = of_find_node_by_type(NULL, "qe");
+ if (!np) {
+ dev_err(&ofdev->dev, "could not find 'qe' node\n");
+ kfree(qe_port);
+ return -EINVAL;
+ }
+ }
+
+ iprop = of_get_property(np, "brg-frequency", NULL);
+ if (!iprop) {
+ dev_err(&ofdev->dev,
+ "missing brg-frequency in device tree\n");
+ kfree(qe_port);
+ return -EINVAL;
+ }
+
+ if (*iprop)
+ qe_port->port.uartclk = *iprop;
+ else {
+ /*
+ * Older versions of U-Boot do not initialize the brg-frequency
+ * property, so in this case we assume the BRG frequency is
+ * half the QE bus frequency.
+ */
+ iprop = of_get_property(np, "bus-frequency", NULL);
+ if (!iprop) {
+ dev_err(&ofdev->dev,
+ "missing QE bus-frequency in device tree\n");
+ kfree(qe_port);
+ return -EINVAL;
+ }
+ if (*iprop)
+ qe_port->port.uartclk = *iprop / 2;
+ else {
+ dev_err(&ofdev->dev,
+ "invalid QE bus-frequency in device tree\n");
+ kfree(qe_port);
+ return -EINVAL;
+ }
+ }
+
+ spin_lock_init(&qe_port->port.lock);
+ qe_port->np = np;
+ qe_port->port.dev = &ofdev->dev;
+ qe_port->port.ops = &qe_uart_pops;
+ qe_port->port.iotype = UPIO_MEM;
+
+ qe_port->tx_nrfifos = TX_NUM_FIFO;
+ qe_port->tx_fifosize = TX_BUF_SIZE;
+ qe_port->rx_nrfifos = RX_NUM_FIFO;
+ qe_port->rx_fifosize = RX_BUF_SIZE;
+
+ qe_port->wait_closing = UCC_WAIT_CLOSING;
+ qe_port->port.fifosize = 512;
+ qe_port->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP;
+
+ qe_port->us_info.ucc_num = qe_port->ucc_num;
+ qe_port->us_info.regs = (phys_addr_t) res.start;
+ qe_port->us_info.irq = qe_port->port.irq;
+
+ qe_port->us_info.rx_bd_ring_len = qe_port->rx_nrfifos;
+ qe_port->us_info.tx_bd_ring_len = qe_port->tx_nrfifos;
+
+ /* Make sure ucc_slow_init() initializes both TX and RX */
+ qe_port->us_info.init_tx = 1;
+ qe_port->us_info.init_rx = 1;
+
+ /* Add the port to the uart sub-system. This will cause
+ * qe_uart_config_port() to be called, so the us_info structure must
+ * be initialized.
+ */
+ ret = uart_add_one_port(&ucc_uart_driver, &qe_port->port);
+ if (ret) {
+ dev_err(&ofdev->dev, "could not add /dev/ttyQE%u\n",
+ qe_port->port.line);
+ kfree(qe_port);
+ return ret;
+ }
+
+ dev_set_drvdata(&ofdev->dev, qe_port);
+
+ dev_info(&ofdev->dev, "UCC%u assigned to /dev/ttyQE%u\n",
+ qe_port->ucc_num + 1, qe_port->port.line);
+
+ /* Display the mknod command for this device */
+ dev_dbg(&ofdev->dev, "mknod command is 'mknod /dev/ttyQE%u c %u %u'\n",
+ qe_port->port.line, SERIAL_QE_MAJOR,
+ SERIAL_QE_MINOR + qe_port->port.line);
+
+ return 0;
+}
+
+static int ucc_uart_remove(struct of_device *ofdev)
+{
+ struct uart_qe_port *qe_port = dev_get_drvdata(&ofdev->dev);
+
+ dev_info(&ofdev->dev, "removing /dev/ttyQE%u\n", qe_port->port.line);
+
+ uart_remove_one_port(&ucc_uart_driver, &qe_port->port);
+
+ dev_set_drvdata(&ofdev->dev, NULL);
+ kfree(qe_port);
+
+ return 0;
+}
+
+static struct of_device_id ucc_uart_match[] = {
+ {
+ .type = "serial",
+ .compatible = "ucc_uart",
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, ucc_uart_match);
+
+static struct of_platform_driver ucc_uart_of_driver = {
+ .owner = THIS_MODULE,
+ .name = "ucc_uart",
+ .match_table = ucc_uart_match,
+ .probe = ucc_uart_probe,
+ .remove = ucc_uart_remove,
+};
+
+static int __init ucc_uart_init(void)
+{
+ int ret;
+
+ printk(KERN_INFO "Freescale QUICC Engine UART device driver\n");
+#ifdef LOOPBACK
+ printk(KERN_INFO "ucc-uart: Using loopback mode\n");
+#endif
+
+ ret = uart_register_driver(&ucc_uart_driver);
+ if (ret) {
+ printk(KERN_ERR "ucc-uart: could not register UART driver\n");
+ return ret;
+ }
+
+ ret = of_register_platform_driver(&ucc_uart_of_driver);
+ if (ret)
+ printk(KERN_ERR
+ "ucc-uart: could not register platform driver\n");
+
+ return ret;
+}
+
+static void __exit ucc_uart_exit(void)
+{
+ printk(KERN_INFO
+ "Freescale QUICC Engine UART device driver unloading\n");
+
+ of_unregister_platform_driver(&ucc_uart_of_driver);
+ uart_unregister_driver(&ucc_uart_driver);
+}
+
+module_init(ucc_uart_init);
+module_exit(ucc_uart_exit);
+
+MODULE_DESCRIPTION("Freescale QUICC Engine (QE) UART");
+MODULE_AUTHOR("Timur Tabi <timur@freescale.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_QE_MAJOR);
+
OpenPOWER on IntegriCloud