diff options
author | Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> | 2014-05-19 18:43:24 +0200 |
---|---|---|
committer | Mike Turquette <mturquette@linaro.org> | 2014-05-29 09:30:16 -0700 |
commit | beca8ccce46b915391fdb93508ac7acbe6adb88d (patch) | |
tree | 1b3cfe4f47e2b845b0e48f011ede98d0dc7317da /drivers | |
parent | 70040b356fb4f8b0aeb2f9121bed77d61e5846af (diff) | |
download | op-kernel-dev-beca8ccce46b915391fdb93508ac7acbe6adb88d.zip op-kernel-dev-beca8ccce46b915391fdb93508ac7acbe6adb88d.tar.gz |
clk: berlin: add driver for BG2x audio/video PLL
This is a driver for the AVPLLs built upon a VCO with 8 channels each
found on Marvell Berlin2 SoCs. While both VCOs found on BG2/BG2CD share
the same register set, sometimes registers shifts for one of the VCOs
are a bit off. Nothing serious that should require a separate driver,
so deal with both VCOs in a single driver instead.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/clk/Makefile | 1 | ||||
-rw-r--r-- | drivers/clk/berlin/Makefile | 1 | ||||
-rw-r--r-- | drivers/clk/berlin/berlin2-avpll.c | 393 | ||||
-rw-r--r-- | drivers/clk/berlin/berlin2-avpll.h | 36 |
4 files changed, 431 insertions, 0 deletions
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index f30357a..b25a1fe 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -32,6 +32,7 @@ obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o obj-$(CONFIG_COMMON_CLK_XGENE) += clk-xgene.o obj-$(CONFIG_COMMON_CLK_AT91) += at91/ obj-$(CONFIG_ARCH_BCM_MOBILE) += bcm/ +obj-$(CONFIG_ARCH_BERLIN) += berlin/ obj-$(CONFIG_ARCH_HI3xxx) += hisilicon/ obj-$(CONFIG_ARCH_HIP04) += hisilicon/ obj-$(CONFIG_ARCH_HIX5HD2) += hisilicon/ diff --git a/drivers/clk/berlin/Makefile b/drivers/clk/berlin/Makefile new file mode 100644 index 0000000..5905733 --- /dev/null +++ b/drivers/clk/berlin/Makefile @@ -0,0 +1 @@ +obj-y += berlin2-avpll.o diff --git a/drivers/clk/berlin/berlin2-avpll.c b/drivers/clk/berlin/berlin2-avpll.c new file mode 100644 index 0000000..fd0f26c --- /dev/null +++ b/drivers/clk/berlin/berlin2-avpll.c @@ -0,0 +1,393 @@ +/* + * Copyright (c) 2014 Marvell Technology Group Ltd. + * + * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> + * Alexandre Belloni <alexandre.belloni@free-electrons.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/clk-provider.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/slab.h> + +#include "berlin2-avpll.h" + +/* + * Berlin2 SoCs comprise up to two PLLs called AVPLL built upon a + * VCO with 8 channels each, channel 8 is the odd-one-out and does + * not provide mul/div. + * + * Unfortunately, its registers are not named but just numbered. To + * get in at least some kind of structure, we split each AVPLL into + * the VCOs and each channel into separate clock drivers. + * + * Also, here and there the VCO registers are a bit different with + * respect to bit shifts. Make sure to add a comment for those. + */ +#define NUM_CHANNELS 8 + +#define AVPLL_CTRL(x) ((x) * 0x4) + +#define VCO_CTRL0 AVPLL_CTRL(0) +/* BG2/BG2CDs VCO_B has an additional shift of 4 for its VCO_CTRL0 reg */ +#define VCO_RESET BIT(0) +#define VCO_POWERUP BIT(1) +#define VCO_INTERPOL_SHIFT 2 +#define VCO_INTERPOL_MASK (0xf << VCO_INTERPOL_SHIFT) +#define VCO_REG1V45_SEL_SHIFT 6 +#define VCO_REG1V45_SEL(x) ((x) << VCO_REG1V45_SEL_SHIFT) +#define VCO_REG1V45_SEL_1V40 VCO_REG1V45_SEL(0) +#define VCO_REG1V45_SEL_1V45 VCO_REG1V45_SEL(1) +#define VCO_REG1V45_SEL_1V50 VCO_REG1V45_SEL(2) +#define VCO_REG1V45_SEL_1V55 VCO_REG1V45_SEL(3) +#define VCO_REG1V45_SEL_MASK VCO_REG1V45_SEL(3) +#define VCO_REG0V9_SEL_SHIFT 8 +#define VCO_REG0V9_SEL_MASK (0xf << VCO_REG0V9_SEL_SHIFT) +#define VCO_VTHCAL_SHIFT 12 +#define VCO_VTHCAL(x) ((x) << VCO_VTHCAL_SHIFT) +#define VCO_VTHCAL_0V90 VCO_VTHCAL(0) +#define VCO_VTHCAL_0V95 VCO_VTHCAL(1) +#define VCO_VTHCAL_1V00 VCO_VTHCAL(2) +#define VCO_VTHCAL_1V05 VCO_VTHCAL(3) +#define VCO_VTHCAL_MASK VCO_VTHCAL(3) +#define VCO_KVCOEXT_SHIFT 14 +#define VCO_KVCOEXT_MASK (0x3 << VCO_KVCOEXT_SHIFT) +#define VCO_KVCOEXT_ENABLE BIT(17) +#define VCO_V2IEXT_SHIFT 18 +#define VCO_V2IEXT_MASK (0xf << VCO_V2IEXT_SHIFT) +#define VCO_V2IEXT_ENABLE BIT(22) +#define VCO_SPEED_SHIFT 23 +#define VCO_SPEED(x) ((x) << VCO_SPEED_SHIFT) +#define VCO_SPEED_1G08_1G21 VCO_SPEED(0) +#define VCO_SPEED_1G21_1G40 VCO_SPEED(1) +#define VCO_SPEED_1G40_1G61 VCO_SPEED(2) +#define VCO_SPEED_1G61_1G86 VCO_SPEED(3) +#define VCO_SPEED_1G86_2G00 VCO_SPEED(4) +#define VCO_SPEED_2G00_2G22 VCO_SPEED(5) +#define VCO_SPEED_2G22 VCO_SPEED(6) +#define VCO_SPEED_MASK VCO_SPEED(0x7) +#define VCO_CLKDET_ENABLE BIT(26) +#define VCO_CTRL1 AVPLL_CTRL(1) +#define VCO_REFDIV_SHIFT 0 +#define VCO_REFDIV(x) ((x) << VCO_REFDIV_SHIFT) +#define VCO_REFDIV_1 VCO_REFDIV(0) +#define VCO_REFDIV_2 VCO_REFDIV(1) +#define VCO_REFDIV_4 VCO_REFDIV(2) +#define VCO_REFDIV_3 VCO_REFDIV(3) +#define VCO_REFDIV_MASK VCO_REFDIV(0x3f) +#define VCO_FBDIV_SHIFT 6 +#define VCO_FBDIV(x) ((x) << VCO_FBDIV_SHIFT) +#define VCO_FBDIV_MASK VCO_FBDIV(0xff) +#define VCO_ICP_SHIFT 14 +/* PLL Charge Pump Current = 10uA * (x + 1) */ +#define VCO_ICP(x) ((x) << VCO_ICP_SHIFT) +#define VCO_ICP_MASK VCO_ICP(0xf) +#define VCO_LOAD_CAP BIT(18) +#define VCO_CALIBRATION_START BIT(19) +#define VCO_FREQOFFSETn(x) AVPLL_CTRL(3 + (x)) +#define VCO_FREQOFFSET_MASK 0x7ffff +#define VCO_CTRL10 AVPLL_CTRL(10) +#define VCO_POWERUP_CH1 BIT(20) +#define VCO_CTRL11 AVPLL_CTRL(11) +#define VCO_CTRL12 AVPLL_CTRL(12) +#define VCO_CTRL13 AVPLL_CTRL(13) +#define VCO_CTRL14 AVPLL_CTRL(14) +#define VCO_CTRL15 AVPLL_CTRL(15) +#define VCO_SYNC1n(x) AVPLL_CTRL(15 + (x)) +#define VCO_SYNC1_MASK 0x1ffff +#define VCO_SYNC2n(x) AVPLL_CTRL(23 + (x)) +#define VCO_SYNC2_MASK 0x1ffff +#define VCO_CTRL30 AVPLL_CTRL(30) +#define VCO_DPLL_CH1_ENABLE BIT(17) + +struct berlin2_avpll_vco { + struct clk_hw hw; + void __iomem *base; + u8 flags; +}; + +#define to_avpll_vco(hw) container_of(hw, struct berlin2_avpll_vco, hw) + +static int berlin2_avpll_vco_is_enabled(struct clk_hw *hw) +{ + struct berlin2_avpll_vco *vco = to_avpll_vco(hw); + u32 reg; + + reg = readl_relaxed(vco->base + VCO_CTRL0); + if (vco->flags & BERLIN2_AVPLL_BIT_QUIRK) + reg >>= 4; + + return !!(reg & VCO_POWERUP); +} + +static int berlin2_avpll_vco_enable(struct clk_hw *hw) +{ + struct berlin2_avpll_vco *vco = to_avpll_vco(hw); + u32 reg; + + reg = readl_relaxed(vco->base + VCO_CTRL0); + if (vco->flags & BERLIN2_AVPLL_BIT_QUIRK) + reg |= VCO_POWERUP << 4; + else + reg |= VCO_POWERUP; + writel_relaxed(reg, vco->base + VCO_CTRL0); + + return 0; +} + +static void berlin2_avpll_vco_disable(struct clk_hw *hw) +{ + struct berlin2_avpll_vco *vco = to_avpll_vco(hw); + u32 reg; + + reg = readl_relaxed(vco->base + VCO_CTRL0); + if (vco->flags & BERLIN2_AVPLL_BIT_QUIRK) + reg &= ~(VCO_POWERUP << 4); + else + reg &= ~VCO_POWERUP; + writel_relaxed(reg, vco->base + VCO_CTRL0); +} + +static u8 vco_refdiv[] = { 1, 2, 4, 3 }; + +static unsigned long +berlin2_avpll_vco_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) +{ + struct berlin2_avpll_vco *vco = to_avpll_vco(hw); + u32 reg, refdiv, fbdiv; + u64 freq = parent_rate; + + /* AVPLL VCO frequency: Fvco = (Fref / refdiv) * fbdiv */ + reg = readl_relaxed(vco->base + VCO_CTRL1); + refdiv = (reg & VCO_REFDIV_MASK) >> VCO_REFDIV_SHIFT; + refdiv = vco_refdiv[refdiv]; + fbdiv = (reg & VCO_FBDIV_MASK) >> VCO_FBDIV_SHIFT; + freq *= fbdiv; + do_div(freq, refdiv); + + return (unsigned long)freq; +} + +static const struct clk_ops berlin2_avpll_vco_ops = { + .is_enabled = berlin2_avpll_vco_is_enabled, + .enable = berlin2_avpll_vco_enable, + .disable = berlin2_avpll_vco_disable, + .recalc_rate = berlin2_avpll_vco_recalc_rate, +}; + +struct clk * __init berlin2_avpll_vco_register(void __iomem *base, + const char *name, const char *parent_name, + u8 vco_flags, unsigned long flags) +{ + struct berlin2_avpll_vco *vco; + struct clk_init_data init; + + vco = kzalloc(sizeof(*vco), GFP_KERNEL); + if (!vco) + return ERR_PTR(-ENOMEM); + + vco->base = base; + vco->flags = vco_flags; + vco->hw.init = &init; + init.name = name; + init.ops = &berlin2_avpll_vco_ops; + init.parent_names = &parent_name; + init.num_parents = 1; + init.flags = flags; + + return clk_register(NULL, &vco->hw); +} + +struct berlin2_avpll_channel { + struct clk_hw hw; + void __iomem *base; + u8 flags; + u8 index; +}; + +#define to_avpll_channel(hw) container_of(hw, struct berlin2_avpll_channel, hw) + +static int berlin2_avpll_channel_is_enabled(struct clk_hw *hw) +{ + struct berlin2_avpll_channel *ch = to_avpll_channel(hw); + u32 reg; + + if (ch->index == 7) + return 1; + + reg = readl_relaxed(ch->base + VCO_CTRL10); + reg &= VCO_POWERUP_CH1 << ch->index; + + return !!reg; +} + +static int berlin2_avpll_channel_enable(struct clk_hw *hw) +{ + struct berlin2_avpll_channel *ch = to_avpll_channel(hw); + u32 reg; + + reg = readl_relaxed(ch->base + VCO_CTRL10); + reg |= VCO_POWERUP_CH1 << ch->index; + writel_relaxed(reg, ch->base + VCO_CTRL10); + + return 0; +} + +static void berlin2_avpll_channel_disable(struct clk_hw *hw) +{ + struct berlin2_avpll_channel *ch = to_avpll_channel(hw); + u32 reg; + + reg = readl_relaxed(ch->base + VCO_CTRL10); + reg &= ~(VCO_POWERUP_CH1 << ch->index); + writel_relaxed(reg, ch->base + VCO_CTRL10); +} + +static const u8 div_hdmi[] = { 1, 2, 4, 6 }; +static const u8 div_av1[] = { 1, 2, 5, 5 }; + +static unsigned long +berlin2_avpll_channel_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) +{ + struct berlin2_avpll_channel *ch = to_avpll_channel(hw); + u32 reg, div_av2, div_av3, divider = 1; + u64 freq = parent_rate; + + reg = readl_relaxed(ch->base + VCO_CTRL30); + if ((reg & (VCO_DPLL_CH1_ENABLE << ch->index)) == 0) + goto skip_div; + + /* + * Fch = (Fref * sync2) / + * (sync1 * div_hdmi * div_av1 * div_av2 * div_av3) + */ + + reg = readl_relaxed(ch->base + VCO_SYNC1n(ch->index)); + /* BG2/BG2CDs SYNC1 reg on AVPLL_B channel 1 is shifted by 4 */ + if (ch->flags & BERLIN2_AVPLL_BIT_QUIRK && ch->index == 0) + reg >>= 4; + divider = reg & VCO_SYNC1_MASK; + + reg = readl_relaxed(ch->base + VCO_SYNC2n(ch->index)); + freq *= reg & VCO_SYNC2_MASK; + + /* Channel 8 has no dividers */ + if (ch->index == 7) + goto skip_div; + + /* + * HDMI divider start at VCO_CTRL11, bit 7; MSB is enable, lower 2 bit + * determine divider. + */ + reg = readl_relaxed(ch->base + VCO_CTRL11) >> 7; + reg = (reg >> (ch->index * 3)); + if (reg & BIT(2)) + divider *= div_hdmi[reg & 0x3]; + + /* + * AV1 divider start at VCO_CTRL11, bit 28; MSB is enable, lower 2 bit + * determine divider. + */ + if (ch->index == 0) { + reg = readl_relaxed(ch->base + VCO_CTRL11); + reg >>= 28; + } else { + reg = readl_relaxed(ch->base + VCO_CTRL12); + reg >>= (ch->index-1) * 3; + } + if (reg & BIT(2)) + divider *= div_av1[reg & 0x3]; + + /* + * AV2 divider start at VCO_CTRL12, bit 18; each 7 bits wide, + * zero is not a valid value. + */ + if (ch->index < 2) { + reg = readl_relaxed(ch->base + VCO_CTRL12); + reg >>= 18 + (ch->index * 7); + } else if (ch->index < 7) { + reg = readl_relaxed(ch->base + VCO_CTRL13); + reg >>= (ch->index - 2) * 7; + } else { + reg = readl_relaxed(ch->base + VCO_CTRL14); + } + div_av2 = reg & 0x7f; + if (div_av2) + divider *= div_av2; + + /* + * AV3 divider start at VCO_CTRL14, bit 7; each 4 bits wide. + * AV2/AV3 form a fractional divider, where only specfic values for AV3 + * are allowed. AV3 != 0 divides by AV2/2, AV3=0 is bypass. + */ + if (ch->index < 6) { + reg = readl_relaxed(ch->base + VCO_CTRL14); + reg >>= 7 + (ch->index * 4); + } else { + reg = readl_relaxed(ch->base + VCO_CTRL15); + } + div_av3 = reg & 0xf; + if (div_av2 && div_av3) + freq *= 2; + +skip_div: + do_div(freq, divider); + return (unsigned long)freq; +} + +static const struct clk_ops berlin2_avpll_channel_ops = { + .is_enabled = berlin2_avpll_channel_is_enabled, + .enable = berlin2_avpll_channel_enable, + .disable = berlin2_avpll_channel_disable, + .recalc_rate = berlin2_avpll_channel_recalc_rate, +}; + +/* + * Another nice quirk: + * On some production SoCs, AVPLL channels are scrambled with respect + * to the channel numbering in the registers but still referenced by + * their original channel numbers. We deal with it by having a flag + * and a translation table for the index. + */ +static const u8 quirk_index[] __initconst = { 0, 6, 5, 4, 3, 2, 1, 7 }; + +struct clk * __init berlin2_avpll_channel_register(void __iomem *base, + const char *name, u8 index, const char *parent_name, + u8 ch_flags, unsigned long flags) +{ + struct berlin2_avpll_channel *ch; + struct clk_init_data init; + + ch = kzalloc(sizeof(*ch), GFP_KERNEL); + if (!ch) + return ERR_PTR(-ENOMEM); + + ch->base = base; + if (ch_flags & BERLIN2_AVPLL_SCRAMBLE_QUIRK) + ch->index = quirk_index[index]; + else + ch->index = index; + + ch->flags = ch_flags; + ch->hw.init = &init; + init.name = name; + init.ops = &berlin2_avpll_channel_ops; + init.parent_names = &parent_name; + init.num_parents = 1; + init.flags = flags; + + return clk_register(NULL, &ch->hw); +} diff --git a/drivers/clk/berlin/berlin2-avpll.h b/drivers/clk/berlin/berlin2-avpll.h new file mode 100644 index 0000000..a37f506 --- /dev/null +++ b/drivers/clk/berlin/berlin2-avpll.h @@ -0,0 +1,36 @@ +/* + * Copyright (c) 2014 Marvell Technology Group Ltd. + * + * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> + * Alexandre Belloni <alexandre.belloni@free-electrons.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ +#ifndef __BERLIN2_AVPLL_H +#define __BERLIN2_AVPLL_H + +struct clk; + +#define BERLIN2_AVPLL_BIT_QUIRK BIT(0) +#define BERLIN2_AVPLL_SCRAMBLE_QUIRK BIT(1) + +struct clk * __init +berlin2_avpll_vco_register(void __iomem *base, const char *name, + const char *parent_name, u8 vco_flags, unsigned long flags); + +struct clk * __init +berlin2_avpll_channel_register(void __iomem *base, const char *name, + u8 index, const char *parent_name, u8 ch_flags, + unsigned long flags); + +#endif /* __BERLIN2_AVPLL_H */ |