Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6

* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: (47 commits)
  hwmon: (adm1026) Prevent log spamming
  hwmon: (adm1026) Fix debug messages
  hwmon: (adm1029) Use mask for fan_div value
  hwmon: (adt7470) Add documentation
  hwmon: (ibmaem) Automatically load on IBM systems via DMI
  hwmon: (ibmpex) Automatically load on IBM systems via DMI
  hwmon: (w83781d) Use new style driver binding
  hwmon: (w83781d) Stop abusing struct i2c_client for ISA devices
  hwmon: (w83781d) Make ISA interface depend on CONFIG_ISA
  hwmon: (w83781d) Additional information about AS99127F PWM
  hwmon: (w83781d) Detect alias chips
  hwmon: (w83781d) Refactor beep enable handling
  hwmon: Drop dead links to old National Semiconductor chip datasheets
  hwmon: (w83791d) add support for thermal cruise mode
  hwmon: (w83791d) add pwm_enable support
  hwmon: (w83791d) add manual PWM support
  hwmon: (w83791d) fan 4/5 pins can also be used for gpio
  hwmon: (max1619) Use inline functions instead of macros
  hwmon: (it87) Fix thermal sensor type values
  hwmon: (lm78) Convert to a new-style i2c driver
  ...

19 files changed, 1683 insertions, 1043 deletions

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index ebacc0a..6de1e0f 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -510,11 +510,9 @@ config SENSORS_LM90
 	depends on I2C
 	help
 	  If you say yes here you get support for National Semiconductor LM90,
-	  LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657,
-	  MAX6658, MAX6659, MAX6680 and MAX6681 sensor chips.
-
-	  The Analog Devices ADT7461 sensor chip is also supported, but only
-	  if found in ADM1032 compatibility mode.
+	  LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, and Maxim
+	  MAX6646, MAX6647, MAX6649, MAX6657, MAX6658, MAX6659, MAX6680 and
+	  MAX6681 sensor chips.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called lm90.
diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c
index 7fe2441..ff7de40 100644
--- a/drivers/hwmon/adm1026.c
+++ b/drivers/hwmon/adm1026.c
@@ -279,7 +279,6 @@ struct adm1026_data {
 	u8 fan_min[8];		/* Register value */
 	u8 fan_div[8];		/* Decoded value */
 	struct pwm_data pwm1;	/* Pwm control values */
-	int vid;		/* Decoded value */
 	u8 vrm;			/* VRM version */
 	u8 analog_out;		/* Register value (DAC) */
 	long alarms;		/* Register encoding, combined */
@@ -455,7 +454,7 @@ static void adm1026_print_gpio(struct i2c_client *client)
 	struct adm1026_data *data = i2c_get_clientdata(client);
 	int i;
 
-	dev_dbg(&client->dev, "GPIO config is:");
+	dev_dbg(&client->dev, "GPIO config is:\n");
 	for (i = 0;i <= 7;++i) {
 		if (data->config2 & (1 << i)) {
 			dev_dbg(&client->dev, "\t%sGP%s%d\n",
@@ -697,8 +696,6 @@ static struct adm1026_data *adm1026_update_device(struct device *dev)
 		data->last_config = jiffies;
 	}; /* last_config */
 
-	dev_dbg(&client->dev, "Setting VID from GPIO11-15.\n");
-	data->vid = (data->gpio >> 11) & 0x1f;
 	data->valid = 1;
 	mutex_unlock(&data->update_lock);
 	return data;
@@ -1215,7 +1212,10 @@ static DEVICE_ATTR(analog_out, S_IRUGO | S_IWUSR, show_analog_out_reg,
 static ssize_t show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct adm1026_data *data = adm1026_update_device(dev);
-	return sprintf(buf, "%d\n", vid_from_reg(data->vid & 0x3f, data->vrm));
+	int vid = (data->gpio >> 11) & 0x1f;
+
+	dev_dbg(dev, "Setting VID from GPIO11-15.\n");
+	return sprintf(buf, "%d\n", vid_from_reg(vid, data->vrm));
 }
 static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
 
@@ -1681,17 +1681,16 @@ static int adm1026_detect(struct i2c_client *client, int kind,
 			kind = adm1026;
 		} else if (company == ADM1026_COMPANY_ANALOG_DEV
 			&& (verstep & 0xf0) == ADM1026_VERSTEP_GENERIC) {
-			dev_err(&adapter->dev, ": Unrecognized stepping "
+			dev_err(&adapter->dev, "Unrecognized stepping "
 				"0x%02x. Defaulting to ADM1026.\n", verstep);
 			kind = adm1026;
 		} else if ((verstep & 0xf0) == ADM1026_VERSTEP_GENERIC) {
-			dev_err(&adapter->dev, ": Found version/stepping "
+			dev_err(&adapter->dev, "Found version/stepping "
 				"0x%02x. Assuming generic ADM1026.\n",
 				verstep);
 			kind = any_chip;
 		} else {
-			dev_dbg(&adapter->dev, ": Autodetection "
-				"failed\n");
+			dev_dbg(&adapter->dev, "Autodetection failed\n");
 			/* Not an ADM1026 ... */
 			if (kind == 0) { /* User used force=x,y */
 				dev_err(&adapter->dev, "Generic ADM1026 not "
diff --git a/drivers/hwmon/adm1029.c b/drivers/hwmon/adm1029.c
index ba84ca5..3671815 100644
--- a/drivers/hwmon/adm1029.c
+++ b/drivers/hwmon/adm1029.c
@@ -179,7 +179,8 @@ show_fan(struct device *dev, struct device_attribute *devattr, char *buf)
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 	struct adm1029_data *data = adm1029_update_device(dev);
 	u16 val;
-	if (data->fan[attr->index] == 0 || data->fan_div[attr->index] == 0
+	if (data->fan[attr->index] == 0
+	    || (data->fan_div[attr->index] & 0xC0) == 0
 	    || data->fan[attr->index] == 255) {
 		return sprintf(buf, "0\n");
 	}
@@ -194,7 +195,7 @@ show_fan_div(struct device *dev, struct device_attribute *devattr, char *buf)
 {
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 	struct adm1029_data *data = adm1029_update_device(dev);
-	if (data->fan_div[attr->index] == 0)
+	if ((data->fan_div[attr->index] & 0xC0) == 0)
 		return sprintf(buf, "0\n");
 	return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[attr->index]));
 }
diff --git a/drivers/hwmon/ams/ams-core.c b/drivers/hwmon/ams/ams-core.c
index fbefa82..6c9ace1 100644
--- a/drivers/hwmon/ams/ams-core.c
+++ b/drivers/hwmon/ams/ams-core.c
@@ -99,39 +99,31 @@ static struct pmf_irq_client ams_shock_client = {
  */
 static void ams_worker(struct work_struct *work)
 {
-	mutex_lock(&ams_info.lock);
-
-	if (ams_info.has_device) {
-		unsigned long flags;
+	unsigned long flags;
+	u8 irqs_to_clear;
 
-		spin_lock_irqsave(&ams_info.irq_lock, flags);
+	mutex_lock(&ams_info.lock);
 
-		if (ams_info.worker_irqs & AMS_IRQ_FREEFALL) {
-			if (verbose)
-				printk(KERN_INFO "ams: freefall detected!\n");
+	spin_lock_irqsave(&ams_info.irq_lock, flags);
+	irqs_to_clear = ams_info.worker_irqs;
 
-			ams_info.worker_irqs &= ~AMS_IRQ_FREEFALL;
+	if (ams_info.worker_irqs & AMS_IRQ_FREEFALL) {
+		if (verbose)
+			printk(KERN_INFO "ams: freefall detected!\n");
 
-			/* we must call this with interrupts enabled */
-			spin_unlock_irqrestore(&ams_info.irq_lock, flags);
-			ams_info.clear_irq(AMS_IRQ_FREEFALL);
-			spin_lock_irqsave(&ams_info.irq_lock, flags);
-		}
+		ams_info.worker_irqs &= ~AMS_IRQ_FREEFALL;
+	}
 
-		if (ams_info.worker_irqs & AMS_IRQ_SHOCK) {
-			if (verbose)
-				printk(KERN_INFO "ams: shock detected!\n");
+	if (ams_info.worker_irqs & AMS_IRQ_SHOCK) {
+		if (verbose)
+			printk(KERN_INFO "ams: shock detected!\n");
 
-			ams_info.worker_irqs &= ~AMS_IRQ_SHOCK;
+		ams_info.worker_irqs &= ~AMS_IRQ_SHOCK;
+	}
 
-			/* we must call this with interrupts enabled */
-			spin_unlock_irqrestore(&ams_info.irq_lock, flags);
-			ams_info.clear_irq(AMS_IRQ_SHOCK);
-			spin_lock_irqsave(&ams_info.irq_lock, flags);
-		}
+	spin_unlock_irqrestore(&ams_info.irq_lock, flags);
 
-		spin_unlock_irqrestore(&ams_info.irq_lock, flags);
-	}
+	ams_info.clear_irq(irqs_to_clear);
 
 	mutex_unlock(&ams_info.lock);
 }
@@ -223,34 +215,28 @@ int __init ams_init(void)
 
 void ams_exit(void)
 {
-	mutex_lock(&ams_info.lock);
-
-	if (ams_info.has_device) {
-		/* Remove input device */
-		ams_input_exit();
+	/* Remove input device */
+	ams_input_exit();
 
-		/* Shut down implementation */
-		ams_info.exit();
-
-		/* Flush interrupt worker
-		 *
-		 * We do this after ams_info.exit(), because an interrupt might
-		 * have arrived before disabling them.
-		 */
-		flush_scheduled_work();
+	/* Remove attributes */
+	device_remove_file(&ams_info.of_dev->dev, &dev_attr_current);
 
-		/* Remove attributes */
-		device_remove_file(&ams_info.of_dev->dev, &dev_attr_current);
+	/* Shut down implementation */
+	ams_info.exit();
 
-		/* Remove device */
-		of_device_unregister(ams_info.of_dev);
+	/* Flush interrupt worker
+	 *
+	 * We do this after ams_info.exit(), because an interrupt might
+	 * have arrived before disabling them.
+	 */
+	flush_scheduled_work();
 
-		/* Remove handler */
-		pmf_unregister_irq_client(&ams_shock_client);
-		pmf_unregister_irq_client(&ams_freefall_client);
-	}
+	/* Remove device */
+	of_device_unregister(ams_info.of_dev);
 
-	mutex_unlock(&ams_info.lock);
+	/* Remove handler */
+	pmf_unregister_irq_client(&ams_shock_client);
+	pmf_unregister_irq_client(&ams_freefall_client);
 }
 
 MODULE_AUTHOR("Stelian Pop, Michael Hanselmann");
diff --git a/drivers/hwmon/ams/ams-i2c.c b/drivers/hwmon/ams/ams-i2c.c
index 95776053..2cbf8a65 100644
--- a/drivers/hwmon/ams/ams-i2c.c
+++ b/drivers/hwmon/ams/ams-i2c.c
@@ -60,26 +60,34 @@ enum ams_i2c_cmd {
 	AMS_CMD_START,
 };
 
-static int ams_i2c_attach(struct i2c_adapter *adapter);
-static int ams_i2c_detach(struct i2c_adapter *adapter);
+static int ams_i2c_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id);
+static int ams_i2c_remove(struct i2c_client *client);
+
+static const struct i2c_device_id ams_id[] = {
+	{ "ams", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ams_id);
 
 static struct i2c_driver ams_i2c_driver = {
 	.driver = {
 		.name   = "ams",
 		.owner  = THIS_MODULE,
 	},
-	.attach_adapter = ams_i2c_attach,
-	.detach_adapter = ams_i2c_detach,
+	.probe          = ams_i2c_probe,
+	.remove         = ams_i2c_remove,
+	.id_table       = ams_id,
 };
 
 static s32 ams_i2c_read(u8 reg)
 {
-	return i2c_smbus_read_byte_data(&ams_info.i2c_client, reg);
+	return i2c_smbus_read_byte_data(ams_info.i2c_client, reg);
 }
 
 static int ams_i2c_write(u8 reg, u8 value)
 {
-	return i2c_smbus_write_byte_data(&ams_info.i2c_client, reg, value);
+	return i2c_smbus_write_byte_data(ams_info.i2c_client, reg, value);
 }
 
 static int ams_i2c_cmd(enum ams_i2c_cmd cmd)
@@ -152,9 +160,9 @@ static void ams_i2c_get_xyz(s8 *x, s8 *y, s8 *z)
 	*z = ams_i2c_read(AMS_DATAZ);
 }
 
-static int ams_i2c_attach(struct i2c_adapter *adapter)
+static int ams_i2c_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
 {
-	unsigned long bus;
 	int vmaj, vmin;
 	int result;
 
@@ -162,17 +170,7 @@ static int ams_i2c_attach(struct i2c_adapter *adapter)
 	if (unlikely(ams_info.has_device))
 		return -ENODEV;
 
-	if (strncmp(adapter->name, "uni-n", 5))
-		return -ENODEV;
-
-	bus = simple_strtoul(adapter->name + 6, NULL, 10);
-	if (bus != ams_info.i2c_bus)
-		return -ENODEV;
-
-	ams_info.i2c_client.addr = ams_info.i2c_address;
-	ams_info.i2c_client.adapter = adapter;
-	ams_info.i2c_client.driver = &ams_i2c_driver;
-	strcpy(ams_info.i2c_client.name, "Apple Motion Sensor");
+	ams_info.i2c_client = client;
 
 	if (ams_i2c_cmd(AMS_CMD_RESET)) {
 		printk(KERN_INFO "ams: Failed to reset the device\n");
@@ -237,7 +235,7 @@ static int ams_i2c_attach(struct i2c_adapter *adapter)
 	return 0;
 }
 
-static int ams_i2c_detach(struct i2c_adapter *adapter)
+static int ams_i2c_remove(struct i2c_client *client)
 {
 	if (ams_info.has_device) {
 		/* Disable interrupts */
@@ -261,11 +259,7 @@ static void ams_i2c_exit(void)
 
 int __init ams_i2c_init(struct device_node *np)
 {
-	char *tmp_bus;
 	int result;
-	const u32 *prop;
-
-	mutex_lock(&ams_info.lock);
 
 	/* Set implementation stuff */
 	ams_info.of_node = np;
@@ -275,25 +269,7 @@ int __init ams_i2c_init(struct device_node *np)
 	ams_info.clear_irq = ams_i2c_clear_irq;
 	ams_info.bustype = BUS_I2C;
 
-	/* look for bus either using "reg" or by path */
-	prop = of_get_property(ams_info.of_node, "reg", NULL);
-	if (!prop) {
-		result = -ENODEV;
-
-		goto exit;
-	}
-
-	tmp_bus = strstr(ams_info.of_node->full_name, "/i2c-bus@");
-	if (tmp_bus)
-		ams_info.i2c_bus = *(tmp_bus + 9) - '0';
-	else
-		ams_info.i2c_bus = ((*prop) >> 8) & 0x0f;
-	ams_info.i2c_address = ((*prop) & 0xff) >> 1;
-
 	result = i2c_add_driver(&ams_i2c_driver);
 
-exit:
-	mutex_unlock(&ams_info.lock);
-
 	return result;
 }
diff --git a/drivers/hwmon/ams/ams-input.c b/drivers/hwmon/ams/ams-input.c
index 7b81e0c2..8a71239 100644
--- a/drivers/hwmon/ams/ams-input.c
+++ b/drivers/hwmon/ams/ams-input.c
@@ -20,13 +20,15 @@
 #include "ams.h"
 
 static unsigned int joystick;
-module_param(joystick, bool, 0644);
+module_param(joystick, bool, S_IRUGO);
 MODULE_PARM_DESC(joystick, "Enable the input class device on module load");
 
 static unsigned int invert;
-module_param(invert, bool, 0644);
+module_param(invert, bool, S_IWUSR | S_IRUGO);
 MODULE_PARM_DESC(invert, "Invert input data on X and Y axis");
 
+static DEFINE_MUTEX(ams_input_mutex);
+
 static void ams_idev_poll(struct input_polled_dev *dev)
 {
 	struct input_dev *idev = dev->input;
@@ -50,13 +52,11 @@ static void ams_idev_poll(struct input_polled_dev *dev)
 }
 
 /* Call with ams_info.lock held! */
-static void ams_input_enable(void)
+static int ams_input_enable(void)
 {
 	struct input_dev *input;
 	s8 x, y, z;
-
-	if (ams_info.idev)
-		return;
+	int error;
 
 	ams_sensors(&x, &y, &z);
 	ams_info.xcalib = x;
@@ -65,7 +65,7 @@ static void ams_input_enable(void)
 
 	ams_info.idev = input_allocate_polled_device();
 	if (!ams_info.idev)
-		return;
+		return -ENOMEM;
 
 	ams_info.idev->poll = ams_idev_poll;
 	ams_info.idev->poll_interval = 25;
@@ -84,14 +84,18 @@ static void ams_input_enable(void)
 	set_bit(EV_KEY, input->evbit);
 	set_bit(BTN_TOUCH, input->keybit);
 
-	if (input_register_polled_device(ams_info.idev)) {
+	error = input_register_polled_device(ams_info.idev);
+	if (error) {
 		input_free_polled_device(ams_info.idev);
 		ams_info.idev = NULL;
-		return;
+		return error;
 	}
+
+	joystick = 1;
+
+	return 0;
 }
 
-/* Call with ams_info.lock held! */
 static void ams_input_disable(void)
 {
 	if (ams_info.idev) {
@@ -99,6 +103,8 @@ static void ams_input_disable(void)
 		input_free_polled_device(ams_info.idev);
 		ams_info.idev = NULL;
 	}
+
+	joystick = 0;
 }
 
 static ssize_t ams_input_show_joystick(struct device *dev,
@@ -110,39 +116,42 @@ static ssize_t ams_input_show_joystick(struct device *dev,
 static ssize_t ams_input_store_joystick(struct device *dev,
 	struct device_attribute *attr, const char *buf, size_t count)
 {
-	if (sscanf(buf, "%d\n", &joystick) != 1)
+	unsigned long enable;
+	int error = 0;
+
+	if (strict_strtoul(buf, 0, &enable) || enable > 1)
 		return -EINVAL;
 
-	mutex_lock(&ams_info.lock);
+	mutex_lock(&ams_input_mutex);
 
-	if (joystick)
-		ams_input_enable();
-	else
-		ams_input_disable();
+	if (enable != joystick) {
+		if (enable)
+			error = ams_input_enable();
+		else
+			ams_input_disable();
+	}
 
-	mutex_unlock(&ams_info.lock);
+	mutex_unlock(&ams_input_mutex);
 
-	return count;
+	return error ? error : count;
 }
 
 static DEVICE_ATTR(joystick, S_IRUGO | S_IWUSR,
 	ams_input_show_joystick, ams_input_store_joystick);
 
-/* Call with ams_info.lock held! */
 int ams_input_init(void)
 {
-	int result;
-
-	result = device_create_file(&ams_info.of_dev->dev, &dev_attr_joystick);
-
-	if (!result && joystick)
+	if (joystick)
 		ams_input_enable();
-	return result;
+
+	return device_create_file(&ams_info.of_dev->dev, &dev_attr_joystick);
 }
 
-/* Call with ams_info.lock held! */
 void ams_input_exit(void)
 {
-	ams_input_disable();
 	device_remove_file(&ams_info.of_dev->dev, &dev_attr_joystick);
+
+	mutex_lock(&ams_input_mutex);
+	ams_input_disable();
+	mutex_unlock(&ams_input_mutex);
 }
diff --git a/drivers/hwmon/ams/ams-pmu.c b/drivers/hwmon/ams/ams-pmu.c
index 9463e97..fb18b3d 100644
--- a/drivers/hwmon/ams/ams-pmu.c
+++ b/drivers/hwmon/ams/ams-pmu.c
@@ -149,8 +149,6 @@ int __init ams_pmu_init(struct device_node *np)
 	const u32 *prop;
 	int result;
 
-	mutex_lock(&ams_info.lock);
-
 	/* Set implementation stuff */
 	ams_info.of_node = np;
 	ams_info.exit = ams_pmu_exit;
@@ -161,10 +159,9 @@ int __init ams_pmu_init(struct device_node *np)
 
 	/* Get PMU command, should be 0x4e, but we can never know */
 	prop = of_get_property(ams_info.of_node, "reg", NULL);
-	if (!prop) {
-		result = -ENODEV;
-		goto exit;
-	}
+	if (!prop)
+		return -ENODEV;
+
 	ams_pmu_cmd = ((*prop) >> 8) & 0xff;
 
 	/* Disable interrupts */
@@ -175,7 +172,7 @@ int __init ams_pmu_init(struct device_node *np)
 
 	result = ams_sensor_attach();
 	if (result < 0)
-		goto exit;
+		return result;
 
 	/* Set default values */
 	ams_pmu_set_register(AMS_FF_LOW_LIMIT, 0x15);
@@ -198,10 +195,5 @@ int __init ams_pmu_init(struct device_node *np)
 
 	printk(KERN_INFO "ams: Found PMU based motion sensor\n");
 
-	result = 0;
-
-exit:
-	mutex_unlock(&ams_info.lock);
-
-	return result;
+	return 0;
 }
diff --git a/drivers/hwmon/ams/ams.h b/drivers/hwmon/ams/ams.h
index 221ef69..5ed387b 100644
--- a/drivers/hwmon/ams/ams.h
+++ b/drivers/hwmon/ams/ams.h
@@ -46,9 +46,7 @@ struct ams {
 
 #ifdef CONFIG_SENSORS_AMS_I2C
 	/* I2C properties */
-	int i2c_bus;
-	int i2c_address;
-	struct i2c_client i2c_client;
+	struct i2c_client *i2c_client;
 #endif
 
 	/* Joystick emulation */
diff --git a/drivers/hwmon/ibmaem.c b/drivers/hwmon/ibmaem.c
index 0f70dc2..7b0ed5d 100644
--- a/drivers/hwmon/ibmaem.c
+++ b/drivers/hwmon/ibmaem.c
@@ -1118,3 +1118,10 @@ MODULE_LICENSE("GPL");
 
 module_init(aem_init);
 module_exit(aem_exit);
+
+MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3350-*");
+MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3550-*");
+MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3650-*");
+MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3655-*");
+MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3755-*");
+MODULE_ALIAS("dmi:bvnIBM:*:pnIBM3850M2/x3950M2-*");
diff --git a/drivers/hwmon/ibmpex.c b/drivers/hwmon/ibmpex.c
index 4e9b19c..537d9fb 100644
--- a/drivers/hwmon/ibmpex.c
+++ b/drivers/hwmon/ibmpex.c
@@ -608,3 +608,9 @@ MODULE_LICENSE("GPL");
 
 module_init(ibmpex_init);
 module_exit(ibmpex_exit);
+
+MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3350-*");
+MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3550-*");
+MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3650-*");
+MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3655-*");
+MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3755-*");
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index d793cc0..b74c957 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -477,7 +477,7 @@ static ssize_t show_sensor(struct device *dev, struct device_attribute *attr,
 	if (reg & (1 << nr))
 		return sprintf(buf, "3\n");  /* thermal diode */
 	if (reg & (8 << nr))
-		return sprintf(buf, "2\n");  /* thermistor */
+		return sprintf(buf, "4\n");  /* thermistor */
 	return sprintf(buf, "0\n");      /* disabled */
 }
 static ssize_t set_sensor(struct device *dev, struct device_attribute *attr,
@@ -493,10 +493,15 @@ static ssize_t set_sensor(struct device *dev, struct device_attribute *attr,
 
 	data->sensor &= ~(1 << nr);
 	data->sensor &= ~(8 << nr);
-	/* 3 = thermal diode; 2 = thermistor; 0 = disabled */
+	if (val == 2) {	/* backwards compatibility */
+		dev_warn(dev, "Sensor type 2 is deprecated, please use 4 "
+			 "instead\n");
+		val = 4;
+	}
+	/* 3 = thermal diode; 4 = thermistor; 0 = disabled */
 	if (val == 3)
 	    data->sensor |= 1 << nr;
-	else if (val == 2)
+	else if (val == 4)
 	    data->sensor |= 8 << nr;
 	else if (val != 0) {
 		mutex_unlock(&data->update_lock);
diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c
index ed7859f..b5e3b28 100644
--- a/drivers/hwmon/lm78.c
+++ b/drivers/hwmon/lm78.c
@@ -114,25 +114,16 @@ static inline int TEMP_FROM_REG(s8 val)
 
 #define DIV_FROM_REG(val) (1 << (val))
 
-/* There are some complications in a module like this. First off, LM78 chips
-   may be both present on the SMBus and the ISA bus, and we have to handle
-   those cases separately at some places. Second, there might be several
-   LM78 chips available (well, actually, that is probably never done; but
-   it is a clean illustration of how to handle a case like that). Finally,
-   a specific chip may be attached to *both* ISA and SMBus, and we would
-   not like to detect it double. Fortunately, in the case of the LM78 at
-   least, a register tells us what SMBus address we are on, so that helps
-   a bit - except if there could be more than one SMBus. Groan. No solution
-   for this yet. */
-
-/* For ISA chips, we abuse the i2c_client addr and name fields. We also use
-   the driver field to differentiate between I2C and ISA chips. */
 struct lm78_data {
-	struct i2c_client client;
+	struct i2c_client *client;
 	struct device *hwmon_dev;
 	struct mutex lock;
 	enum chips type;
 
+	/* For ISA device only */
+	const char *name;
+	int isa_addr;
+
 	struct mutex update_lock;
 	char valid;		/* !=0 if following fields are valid */
 	unsigned long last_updated;	/* In jiffies */
@@ -151,9 +142,11 @@ struct lm78_data {
 };
 
 
-static int lm78_attach_adapter(struct i2c_adapter *adapter);
-static int lm78_detect(struct i2c_adapter *adapter, int address, int kind);
-static int lm78_detach_client(struct i2c_client *client);
+static int lm78_i2c_detect(struct i2c_client *client, int kind,
+			   struct i2c_board_info *info);
+static int lm78_i2c_probe(struct i2c_client *client,
+			  const struct i2c_device_id *id);
+static int lm78_i2c_remove(struct i2c_client *client);
 
 static int __devinit lm78_isa_probe(struct platform_device *pdev);
 static int __devexit lm78_isa_remove(struct platform_device *pdev);
@@ -164,12 +157,23 @@ static struct lm78_data *lm78_update_device(struct device *dev);
 static void lm78_init_device(struct lm78_data *data);
 
 
+static const struct i2c_device_id lm78_i2c_id[] = {
+	{ "lm78", lm78 },
+	{ "lm79", lm79 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, lm78_i2c_id);
+
 static struct i2c_driver lm78_driver = {
+	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "lm78",
 	},
-	.attach_adapter	= lm78_attach_adapter,
-	.detach_client	= lm78_detach_client,
+	.probe		= lm78_i2c_probe,
+	.remove		= lm78_i2c_remove,
+	.id_table	= lm78_i2c_id,
+	.detect		= lm78_i2c_detect,
+	.address_data	= &addr_data,
 };
 
 static struct platform_driver lm78_isa_driver = {
@@ -454,17 +458,6 @@ static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 7);
 static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 11);
 static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4);
 
-/* This function is called when:
-     * lm78_driver is inserted (when this module is loaded), for each
-       available adapter
-     * when a new adapter is inserted (and lm78_driver is still present) */
-static int lm78_attach_adapter(struct i2c_adapter *adapter)
-{
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
-	return i2c_probe(adapter, &addr_data, lm78_detect);
-}
-
 static struct attribute *lm78_attributes[] = {
 	&sensor_dev_attr_in0_input.dev_attr.attr,
 	&sensor_dev_attr_in0_min.dev_attr.attr,
@@ -527,54 +520,77 @@ static ssize_t show_name(struct device *dev, struct device_attribute
 {
 	struct lm78_data *data = dev_get_drvdata(dev);
 
-	return sprintf(buf, "%s\n", data->client.name);
+	return sprintf(buf, "%s\n", data->name);
 }
 static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
 
-/* This function is called by i2c_probe */
-static int lm78_detect(struct i2c_adapter *adapter, int address, int kind)
+/* Returns 1 if the I2C chip appears to be an alias of the ISA chip */
+static int lm78_alias_detect(struct i2c_client *client, u8 chipid)
 {
-	int i, err;
-	struct i2c_client *new_client;
-	struct lm78_data *data;
-	const char *client_name = "";
+	struct lm78_data *isa;
+	int i;
 
-	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
-		err = -ENODEV;
-		goto ERROR1;
+	if (!pdev)	/* No ISA chip */
+		return 0;
+	isa = platform_get_drvdata(pdev);
+
+	if (lm78_read_value(isa, LM78_REG_I2C_ADDR) != client->addr)
+		return 0;	/* Address doesn't match */
+	if ((lm78_read_value(isa, LM78_REG_CHIPID) & 0xfe) != (chipid & 0xfe))
+		return 0;	/* Chip type doesn't match */
+
+	/* We compare all the limit registers, the config register and the
+	 * interrupt mask registers */
+	for (i = 0x2b; i <= 0x3d; i++) {
+		if (lm78_read_value(isa, i) !=
+		    i2c_smbus_read_byte_data(client, i))
+			return 0;
 	}
+	if (lm78_read_value(isa, LM78_REG_CONFIG) !=
+	    i2c_smbus_read_byte_data(client, LM78_REG_CONFIG))
+		return 0;
+	for (i = 0x43; i <= 0x46; i++) {
+		if (lm78_read_value(isa, i) !=
+		    i2c_smbus_read_byte_data(client, i))
+			return 0;
+	}
+
+	return 1;
+}
 
-	/* OK. For now, we presume we have a valid client. We now create the
-	   client structure, even though we cannot fill it completely yet.
-	   But it allows us to access lm78_{read,write}_value. */
+static int lm78_i2c_detect(struct i2c_client *client, int kind,
+			   struct i2c_board_info *info)
+{
+	int i;
+	struct lm78_data *isa = pdev ? platform_get_drvdata(pdev) : NULL;
+	const char *client_name;
+	struct i2c_adapter *adapter = client->adapter;
+	int address = client->addr;
 
-	if (!(data = kzalloc(sizeof(struct lm78_data), GFP_KERNEL))) {
-		err = -ENOMEM;
-		goto ERROR1;
-	}
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -ENODEV;
 
-	new_client = &data->client;
-	i2c_set_clientdata(new_client, data);
-	new_client->addr = address;
-	new_client->adapter = adapter;
-	new_client->driver = &lm78_driver;
+	/* We block updates of the ISA device to minimize the risk of
+	   concurrent access to the same LM78 chip through different
+	   interfaces. */
+	if (isa)
+		mutex_lock(&isa->update_lock);
 
-	/* Now, we do the remaining detection. */
 	if (kind < 0) {
-		if (lm78_read_value(data, LM78_REG_CONFIG) & 0x80) {
-			err = -ENODEV;
-			goto ERROR2;
-		}
-		if (lm78_read_value(data, LM78_REG_I2C_ADDR) !=
-		    address) {
-			err = -ENODEV;
-			goto ERROR2;
-		}
+		if ((i2c_smbus_read_byte_data(client, LM78_REG_CONFIG) & 0x80)
+		 || i2c_smbus_read_byte_data(client, LM78_REG_I2C_ADDR)
+		    != address)
+			goto err_nodev;
+
+		/* Explicitly prevent the misdetection of Winbond chips */
+		i = i2c_smbus_read_byte_data(client, 0x4f);
+		if (i == 0xa3 || i == 0x5c)
+			goto err_nodev;
 	}
 
 	/* Determine the chip type. */
 	if (kind <= 0) {
-		i = lm78_read_value(data, LM78_REG_CHIPID);
+		i = i2c_smbus_read_byte_data(client, LM78_REG_CHIPID);
 		if (i == 0x00 || i == 0x20	/* LM78 */
 		 || i == 0x40)			/* LM78-J */
 			kind = lm78;
@@ -586,33 +602,59 @@ static int lm78_detect(struct i2c_adapter *adapter, int address, int kind)
 					"parameter for unknown chip at "
 					"adapter %d, address 0x%02x\n",
 					i2c_adapter_id(adapter), address);
-			err = -ENODEV;
-			goto ERROR2;
+			goto err_nodev;
+		}
+
+		if (lm78_alias_detect(client, i)) {
+			dev_dbg(&adapter->dev, "Device at 0x%02x appears to "
+				"be the same as ISA device\n", address);
+			goto err_nodev;
 		}
 	}
 
-	if (kind == lm78) {
-		client_name = "lm78";
-	} else if (kind == lm79) {
+	if (isa)
+		mutex_unlock(&isa->update_lock);
+
+	switch (kind) {
+	case lm79:
 		client_name = "lm79";
+		break;
+	default:
+		client_name = "lm78";
 	}
+	strlcpy(info->type, client_name, I2C_NAME_SIZE);
+
+	return 0;
+
+ err_nodev:
+	if (isa)
+		mutex_unlock(&isa->update_lock);
+	return -ENODEV;
+}
+
+static int lm78_i2c_probe(struct i2c_client *client,
+			  const struct i2c_device_id *id)
+{
+	struct lm78_data *data;
+	int err;
 
-	/* Fill in the remaining client fields and put into the global list */
-	strlcpy(new_client->name, client_name, I2C_NAME_SIZE);
-	data->type = kind;
+	data = kzalloc(sizeof(struct lm78_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
 
-	/* Tell the I2C layer a new client has arrived */
-	if ((err = i2c_attach_client(new_client)))
-		goto ERROR2;
+	i2c_set_clientdata(client, data);
+	data->client = client;
+	data->type = id->driver_data;
 
 	/* Initialize the LM78 chip */
 	lm78_init_device(data);
 
 	/* Register sysfs hooks */
-	if ((err = sysfs_create_group(&new_client->dev.kobj, &lm78_group)))
+	err = sysfs_create_group(&client->dev.kobj, &lm78_group);
+	if (err)
 		goto ERROR3;
 
-	data->hwmon_dev = hwmon_device_register(&new_client->dev);
+	data->hwmon_dev = hwmon_device_register(&client->dev);
 	if (IS_ERR(data->hwmon_dev)) {
 		err = PTR_ERR(data->hwmon_dev);
 		goto ERROR4;
@@ -621,26 +663,18 @@ static int lm78_detect(struct i2c_adapter *adapter, int address, int kind)
 	return 0;
 
 ERROR4:
-	sysfs_remove_group(&new_client->dev.kobj, &lm78_group);
+	sysfs_remove_group(&client->dev.kobj, &lm78_group);
 ERROR3:
-	i2c_detach_client(new_client);
-ERROR2:
 	kfree(data);
-ERROR1:
 	return err;
 }
 
-static int lm78_detach_client(struct i2c_client *client)
+static int lm78_i2c_remove(struct i2c_client *client)
 {
 	struct lm78_data *data = i2c_get_clientdata(client);
-	int err;
 
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &lm78_group);
-
-	if ((err = i2c_detach_client(client)))
-		return err;
-
 	kfree(data);
 
 	return 0;
@@ -651,11 +685,10 @@ static int __devinit lm78_isa_probe(struct platform_device *pdev)
 	int err;
 	struct lm78_data *data;
 	struct resource *res;
-	const char *name;
 
 	/* Reserve the ISA region */
 	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
-	if (!request_region(res->start, LM78_EXTENT, "lm78")) {
+	if (!request_region(res->start + LM78_ADDR_REG_OFFSET, 2, "lm78")) {
 		err = -EBUSY;
 		goto exit;
 	}
@@ -665,18 +698,16 @@ static int __devinit lm78_isa_probe(struct platform_device *pdev)
 		goto exit_release_region;
 	}
 	mutex_init(&data->lock);
-	data->client.addr = res->start;
-	i2c_set_clientdata(&data->client, data);
+	data->isa_addr = res->start;
 	platform_set_drvdata(pdev, data);
 
 	if (lm78_read_value(data, LM78_REG_CHIPID) & 0x80) {
 		data->type = lm79;
-		name = "lm79";
+		data->name = "lm79";
 	} else {
 		data->type = lm78;
-		name = "lm78";
+		data->name = "lm78";
 	}
-	strlcpy(data->client.name, name, I2C_NAME_SIZE);
 
 	/* Initialize the LM78 chip */
 	lm78_init_device(data);
@@ -699,7 +730,7 @@ static int __devinit lm78_isa_probe(struct platform_device *pdev)
 	device_remove_file(&pdev->dev, &dev_attr_name);
 	kfree(data);
  exit_release_region:
-	release_region(res->start, LM78_EXTENT);
+	release_region(res->start + LM78_ADDR_REG_OFFSET, 2);
  exit:
 	return err;
 }
@@ -707,13 +738,16 @@ static int __devinit lm78_isa_probe(struct platform_device *pdev)
 static int __devexit lm78_isa_remove(struct platform_device *pdev)
 {
 	struct lm78_data *data = platform_get_drvdata(pdev);
+	struct resource *res;
 
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&pdev->dev.kobj, &lm78_group);
 	device_remove_file(&pdev->dev, &dev_attr_name);
-	release_region(data->client.addr, LM78_EXTENT);
 	kfree(data);
 
+	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	release_region(res->start + LM78_ADDR_REG_OFFSET, 2);
+
 	return 0;
 }
 
@@ -724,13 +758,13 @@ static int __devexit lm78_isa_remove(struct platform_device *pdev)
    would slow down the LM78 access and should not be necessary.  */
 static int lm78_read_value(struct lm78_data *data, u8 reg)
 {
-	struct i2c_client *client = &data->client;
+	struct i2c_client *client = data->client;
 
-	if (!client->driver) { /* ISA device */
+	if (!client) { /* ISA device */
 		int res;
 		mutex_lock(&data->lock);
-		outb_p(reg, client->addr + LM78_ADDR_REG_OFFSET);
-		res = inb_p(client->addr + LM78_DATA_REG_OFFSET);
+		outb_p(reg, data->isa_addr + LM78_ADDR_REG_OFFSET);
+		res = inb_p(data->isa_addr + LM78_DATA_REG_OFFSET);
 		mutex_unlock(&data->lock);
 		return res;
 	} else
@@ -746,12 +780,12 @@ static int lm78_read_value(struct lm78_data *data, u8 reg)
    nowhere else be necessary! */
 static int lm78_write_value(struct lm78_data *data, u8 reg, u8 value)
 {
-	struct i2c_client *client = &data->client;
+	struct i2c_client *client = data->client;
 
-	if (!client->driver) { /* ISA device */
+	if (!client) { /* ISA device */
 		mutex_lock(&data->lock);
-		outb_p(reg, client->addr + LM78_ADDR_REG_OFFSET);
-		outb_p(value, client->addr + LM78_DATA_REG_OFFSET);
+		outb_p(reg, data->isa_addr + LM78_ADDR_REG_OFFSET);
+		outb_p(value, data->isa_addr + LM78_DATA_REG_OFFSET);
 		mutex_unlock(&data->lock);
 		return 0;
 	} else
@@ -837,8 +871,17 @@ static int __init lm78_isa_found(unsigned short address)
 {
 	int val, save, found = 0;
 
-	if (!request_region(address, LM78_EXTENT, "lm78"))
+	/* We have to request the region in two parts because some
+	   boards declare base+4 to base+7 as a PNP device */
+	if (!request_region(address, 4, "lm78")) {
+		pr_debug("lm78: Failed to request low part of region\n");
 		return 0;
+	}
+	if (!request_region(address + 4, 4, "lm78")) {
+		pr_debug("lm78: Failed to request high part of region\n");
+		release_region(address, 4);
+		return 0;
+	}
 
 #define REALLY_SLOW_IO
 	/* We need the timeouts for at least some LM78-like
@@ -901,7 +944,8 @@ static int __init lm78_isa_found(unsigned short address)
 			val & 0x80 ? "LM79" : "LM78", (int)address);
 
  release:
-	release_region(address, LM78_EXTENT);
+	release_region(address + 4, 4);
+	release_region(address, 4);
 	return found;
 }
 
@@ -949,14 +993,12 @@ static int __init sm_lm78_init(void)
 {
 	int res;
 
-	res = i2c_add_driver(&lm78_driver);
-	if (res)
-		goto exit;
-
+	/* We register the ISA device first, so that we can skip the
+	 * registration of an I2C interface to the same device. */
 	if (lm78_isa_found(isa_address)) {
 		res = platform_driver_register(&lm78_isa_driver);
 		if (res)
-			goto exit_unreg_i2c_driver;
+			goto exit;
 
 		/* Sets global pdev as a side effect */
 		res = lm78_isa_device_add(isa_address);
@@ -964,12 +1006,16 @@ static int __init sm_lm78_init(void)
 			goto exit_unreg_isa_driver;
 	}
 
+	res = i2c_add_driver(&lm78_driver);
+	if (res)
+		goto exit_unreg_isa_device;
+
 	return 0;
 
+ exit_unreg_isa_device:
+	platform_device_unregister(pdev);
  exit_unreg_isa_driver:
 	platform_driver_unregister(&lm78_isa_driver);
- exit_unreg_i2c_driver:
-	i2c_del_driver(&lm78_driver);
  exit:
 	return res;
 }
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index 12d446f..3ff0285 100644
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -5,6 +5,7 @@
     Copyright (c) 2002, 2003  Philip Pokorny <ppokorny@penguincomputing.com>
     Copyright (c) 2003        Margit Schubert-While <margitsw@t-online.de>
     Copyright (c) 2004        Justin Thiessen <jthiessen@penguincomputing.com>
+    Copyright (C) 2007, 2008  Jean Delvare <khali@linux-fr.org>
 
     Chip details at	      <http://www.national.com/ds/LM/LM85.pdf>
 
@@ -173,40 +174,39 @@ static int RANGE_TO_REG(int range)
 {
 	int i;
 
-	if (range >= lm85_range_map[15])
-		return 15;
-
 	/* Find the closest match */
-	for (i = 14; i >= 0; --i) {
-		if (range >= lm85_range_map[i]) {
-			if ((lm85_range_map[i + 1] - range) <
-					(range - lm85_range_map[i]))
-				return i + 1;
-			return i;
-		}
+	for (i = 0; i < 15; ++i) {
+		if (range <= (lm85_range_map[i] + lm85_range_map[i + 1]) / 2)
+			break;
 	}
 
-	return 0;
+	return i;
 }
 #define RANGE_FROM_REG(val)	lm85_range_map[(val) & 0x0f]
 
 /* These are the PWM frequency encodings */
-static const int lm85_freq_map[] = { /* .1 Hz */
-	100, 150, 230, 300, 380, 470, 620, 940
+static const int lm85_freq_map[8] = { /* 1 Hz */
+	10, 15, 23, 30, 38, 47, 61, 94
+};
+static const int adm1027_freq_map[8] = { /* 1 Hz */
+	11, 15, 22, 29, 35, 44, 59, 88
 };
 
-static int FREQ_TO_REG(int freq)
+static int FREQ_TO_REG(const int *map, int freq)
 {
 	int i;
 
-	if (freq >= lm85_freq_map[7])
-		return 7;
+	/* Find the closest match */
 	for (i = 0; i < 7; ++i)
-		if (freq <= lm85_freq_map[i])
+		if (freq <= (map[i] + map[i + 1]) / 2)
 			break;
 	return i;
 }
-#define FREQ_FROM_REG(val)	lm85_freq_map[(val) & 0x07]
+
+static int FREQ_FROM_REG(const int *map, u8 reg)
+{
+	return map[reg & 0x07];
+}
 
 /* Since we can't use strings, I'm abusing these numbers
  *   to stand in for the following meanings:
@@ -275,7 +275,6 @@ struct lm85_zone {
 
 struct lm85_autofan {
 	u8 config;	/* Register value */
-	u8 freq;	/* PWM frequency, encoded */
 	u8 min_pwm;	/* Minimum PWM value, encoded */
 	u8 min_off;	/* Min PWM or OFF below "limit", flag */
 };
@@ -283,8 +282,8 @@ struct lm85_autofan {
 /* For each registered chip, we need to keep some data in memory.
    The structure is dynamically allocated. */
 struct lm85_data {
-	struct i2c_client client;
 	struct device *hwmon_dev;
+	const int *freq_map;
 	enum chips type;
 
 	struct mutex update_lock;
@@ -301,6 +300,7 @@ struct lm85_data {
 	u16 fan[4];		/* Register value */
 	u16 fan_min[4];		/* Register value */
 	u8 pwm[3];		/* Register value */
+	u8 pwm_freq[3];		/* Register encoding */
 	u8 temp_ext[3];		/* Decoded values */
 	u8 in_ext[8];		/* Decoded values */
 	u8 vid;			/* Register value */
@@ -310,22 +310,40 @@ struct lm85_data {
 	struct lm85_zone zone[3];
 };
 
-static int lm85_attach_adapter(struct i2c_adapter *adapter);
-static int lm85_detect(struct i2c_adapter *adapter, int address,
-			int kind);
-static int lm85_detach_client(struct i2c_client *client);
+static int lm85_detect(struct i2c_client *client, int kind,
+		       struct i2c_board_info *info);
+static int lm85_probe(struct i2c_client *client,
+		      const struct i2c_device_id *id);
+static int lm85_remove(struct i2c_client *client);
 
 static int lm85_read_value(struct i2c_client *client, u8 reg);
 static void lm85_write_value(struct i2c_client *client, u8 reg, int value);
 static struct lm85_data *lm85_update_device(struct device *dev);
 
 
+static const struct i2c_device_id lm85_id[] = {
+	{ "adm1027", adm1027 },
+	{ "adt7463", adt7463 },
+	{ "lm85", any_chip },
+	{ "lm85b", lm85b },
+	{ "lm85c", lm85c },
+	{ "emc6d100", emc6d100 },
+	{ "emc6d101", emc6d100 },
+	{ "emc6d102", emc6d102 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, lm85_id);
+
 static struct i2c_driver lm85_driver = {
+	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name   = "lm85",
 	},
-	.attach_adapter = lm85_attach_adapter,
-	.detach_client  = lm85_detach_client,
+	.probe		= lm85_probe,
+	.remove		= lm85_remove,
+	.id_table	= lm85_id,
+	.detect		= lm85_detect,
+	.address_data	= &addr_data,
 };
 
 
@@ -528,11 +546,39 @@ static ssize_t set_pwm_enable(struct device *dev, struct device_attribute
 	return count;
 }
 
+static ssize_t show_pwm_freq(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf, "%d\n", FREQ_FROM_REG(data->freq_map,
+						  data->pwm_freq[nr]));
+}
+
+static ssize_t set_pwm_freq(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	mutex_lock(&data->update_lock);
+	data->pwm_freq[nr] = FREQ_TO_REG(data->freq_map, val);
+	lm85_write_value(client, LM85_REG_AFAN_RANGE(nr),
+		(data->zone[nr].range << 4)
+		| data->pwm_freq[nr]);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
 #define show_pwm_reg(offset)						\
 static SENSOR_DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR,		\
 		show_pwm, set_pwm, offset - 1);				\
 static SENSOR_DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR,	\
-		show_pwm_enable, set_pwm_enable, offset - 1)
+		show_pwm_enable, set_pwm_enable, offset - 1);		\
+static SENSOR_DEVICE_ATTR(pwm##offset##_freq, S_IRUGO | S_IWUSR,	\
+		show_pwm_freq, set_pwm_freq, offset - 1)
 
 show_pwm_reg(1);
 show_pwm_reg(2);
@@ -761,31 +807,6 @@ static ssize_t set_pwm_auto_pwm_minctl(struct device *dev,
 	return count;
 }
 
-static ssize_t show_pwm_auto_pwm_freq(struct device *dev,
-		struct device_attribute *attr, char *buf)
-{
-	int nr = to_sensor_dev_attr(attr)->index;
-	struct lm85_data *data = lm85_update_device(dev);
-	return sprintf(buf, "%d\n", FREQ_FROM_REG(data->autofan[nr].freq));
-}
-
-static ssize_t set_pwm_auto_pwm_freq(struct device *dev,
-		struct device_attribute *attr, const char *buf, size_t count)
-{
-	int nr = to_sensor_dev_attr(attr)->index;
-	struct i2c_client *client = to_i2c_client(dev);
-	struct lm85_data *data = i2c_get_clientdata(client);
-	long val = simple_strtol(buf, NULL, 10);
-
-	mutex_lock(&data->update_lock);
-	data->autofan[nr].freq = FREQ_TO_REG(val);
-	lm85_write_value(client, LM85_REG_AFAN_RANGE(nr),
-		(data->zone[nr].range << 4)
-		| data->autofan[nr].freq);
-	mutex_unlock(&data->update_lock);
-	return count;
-}
-
 #define pwm_auto(offset)						\
 static SENSOR_DEVICE_ATTR(pwm##offset##_auto_channels,			\
 		S_IRUGO | S_IWUSR, show_pwm_auto_channels,		\
@@ -795,10 +816,7 @@ static SENSOR_DEVICE_ATTR(pwm##offset##_auto_pwm_min,			\
 		set_pwm_auto_pwm_min, offset - 1);			\
 static SENSOR_DEVICE_ATTR(pwm##offset##_auto_pwm_minctl,		\
 		S_IRUGO | S_IWUSR, show_pwm_auto_pwm_minctl,		\
-		set_pwm_auto_pwm_minctl, offset - 1);			\
-static SENSOR_DEVICE_ATTR(pwm##offset##_auto_pwm_freq,			\
-		S_IRUGO | S_IWUSR, show_pwm_auto_pwm_freq,		\
-		set_pwm_auto_pwm_freq, offset - 1);
+		set_pwm_auto_pwm_minctl, offset - 1)
 
 pwm_auto(1);
 pwm_auto(2);
@@ -867,7 +885,7 @@ static ssize_t set_temp_auto_temp_min(struct device *dev,
 		TEMP_FROM_REG(data->zone[nr].limit));
 	lm85_write_value(client, LM85_REG_AFAN_RANGE(nr),
 		((data->zone[nr].range & 0x0f) << 4)
-		| (data->autofan[nr].freq & 0x07));
+		| (data->pwm_freq[nr] & 0x07));
 
 /* Update temp_auto_hyst and temp_auto_off */
 	data->zone[nr].hyst = HYST_TO_REG(TEMP_FROM_REG(
@@ -910,7 +928,7 @@ static ssize_t set_temp_auto_temp_max(struct device *dev,
 		val - min);
 	lm85_write_value(client, LM85_REG_AFAN_RANGE(nr),
 		((data->zone[nr].range & 0x0f) << 4)
-		| (data->autofan[nr].freq & 0x07));
+		| (data->pwm_freq[nr] & 0x07));
 	mutex_unlock(&data->update_lock);
 	return count;
 }
@@ -957,13 +975,6 @@ temp_auto(1);
 temp_auto(2);
 temp_auto(3);
 
-static int lm85_attach_adapter(struct i2c_adapter *adapter)
-{
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
-	return i2c_probe(adapter, &addr_data, lm85_detect);
-}
-
 static struct attribute *lm85_attributes[] = {
 	&sensor_dev_attr_fan1_input.dev_attr.attr,
 	&sensor_dev_attr_fan2_input.dev_attr.attr,
@@ -984,6 +995,9 @@ static struct attribute *lm85_attributes[] = {
 	&sensor_dev_attr_pwm1_enable.dev_attr.attr,
 	&sensor_dev_attr_pwm2_enable.dev_attr.attr,
 	&sensor_dev_attr_pwm3_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm1_freq.dev_attr.attr,
+	&sensor_dev_attr_pwm2_freq.dev_attr.attr,
+	&sensor_dev_attr_pwm3_freq.dev_attr.attr,
 
 	&sensor_dev_attr_in0_input.dev_attr.attr,
 	&sensor_dev_attr_in1_input.dev_attr.attr,
@@ -1026,9 +1040,6 @@ static struct attribute *lm85_attributes[] = {
 	&sensor_dev_attr_pwm1_auto_pwm_minctl.dev_attr.attr,
 	&sensor_dev_attr_pwm2_auto_pwm_minctl.dev_attr.attr,
 	&sensor_dev_attr_pwm3_auto_pwm_minctl.dev_attr.attr,
-	&sensor_dev_attr_pwm1_auto_pwm_freq.dev_attr.attr,
-	&sensor_dev_attr_pwm2_auto_pwm_freq.dev_attr.attr,
-	&sensor_dev_attr_pwm3_auto_pwm_freq.dev_attr.attr,
 
 	&sensor_dev_attr_temp1_auto_temp_off.dev_attr.attr,
 	&sensor_dev_attr_temp2_auto_temp_off.dev_attr.attr,
@@ -1103,109 +1114,74 @@ static void lm85_init_client(struct i2c_client *client)
 		dev_warn(&client->dev, "Device is not ready\n");
 }
 
-static int lm85_detect(struct i2c_adapter *adapter, int address,
-		int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int lm85_detect(struct i2c_client *client, int kind,
+		       struct i2c_board_info *info)
 {
-	int company, verstep;
-	struct i2c_client *client;
-	struct lm85_data *data;
-	int err = 0;
+	struct i2c_adapter *adapter = client->adapter;
+	int address = client->addr;
 	const char *type_name;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
 		/* We need to be able to do byte I/O */
-		goto ERROR0;
+		return -ENODEV;
 	}
 
-	/* OK. For now, we presume we have a valid client. We now create the
-	   client structure, even though we cannot fill it completely yet.
-	   But it allows us to access lm85_{read,write}_value. */
+	/* If auto-detecting, determine the chip type */
+	if (kind < 0) {
+		int company = lm85_read_value(client, LM85_REG_COMPANY);
+		int verstep = lm85_read_value(client, LM85_REG_VERSTEP);
 
-	if (!(data = kzalloc(sizeof(struct lm85_data), GFP_KERNEL))) {
-		err = -ENOMEM;
-		goto ERROR0;
-	}
+		dev_dbg(&adapter->dev, "Detecting device at 0x%02x with "
+			"COMPANY: 0x%02x and VERSTEP: 0x%02x\n",
+			address, company, verstep);
 
-	client = &data->client;
-	i2c_set_clientdata(client, data);
-	client->addr = address;
-	client->adapter = adapter;
-	client->driver = &lm85_driver;
-
-	/* Now, we do the remaining detection. */
-
-	company = lm85_read_value(client, LM85_REG_COMPANY);
-	verstep = lm85_read_value(client, LM85_REG_VERSTEP);
-
-	dev_dbg(&adapter->dev, "Detecting device at %d,0x%02x with"
-		" COMPANY: 0x%02x and VERSTEP: 0x%02x\n",
-		i2c_adapter_id(client->adapter), client->addr,
-		company, verstep);
-
-	/* If auto-detecting, Determine the chip type. */
-	if (kind <= 0) {
-		dev_dbg(&adapter->dev, "Autodetecting device at %d,0x%02x ...\n",
-			i2c_adapter_id(adapter), address);
-		if (company == LM85_COMPANY_NATIONAL
-		    && verstep == LM85_VERSTEP_LM85C) {
-			kind = lm85c;
-		} else if (company == LM85_COMPANY_NATIONAL
-		    && verstep == LM85_VERSTEP_LM85B) {
-			kind = lm85b;
-		} else if (company == LM85_COMPANY_NATIONAL
-		    && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC) {
-			dev_err(&adapter->dev, "Unrecognized version/stepping 0x%02x"
-				" Defaulting to LM85.\n", verstep);
-			kind = any_chip;
-		} else if (company == LM85_COMPANY_ANALOG_DEV
-		    && verstep == LM85_VERSTEP_ADM1027) {
-			kind = adm1027;
-		} else if (company == LM85_COMPANY_ANALOG_DEV
-		    && (verstep == LM85_VERSTEP_ADT7463
-			 || verstep == LM85_VERSTEP_ADT7463C)) {
-			kind = adt7463;
-		} else if (company == LM85_COMPANY_ANALOG_DEV
-		    && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC) {
-			dev_err(&adapter->dev, "Unrecognized version/stepping 0x%02x"
-				" Defaulting to Generic LM85.\n", verstep);
-			kind = any_chip;
-		} else if (company == LM85_COMPANY_SMSC
-		    && (verstep == LM85_VERSTEP_EMC6D100_A0
-			 || verstep == LM85_VERSTEP_EMC6D100_A1)) {
-			/* Unfortunately, we can't tell a '100 from a '101
-			 * from the registers.  Since a '101 is a '100
-			 * in a package with fewer pins and therefore no
-			 * 3.3V, 1.5V or 1.8V inputs, perhaps if those
-			 * inputs read 0, then it's a '101.
-			 */
-			kind = emc6d100;
-		} else if (company == LM85_COMPANY_SMSC
-		    && verstep == LM85_VERSTEP_EMC6D102) {
-			kind = emc6d102;
-		} else if (company == LM85_COMPANY_SMSC
-		    && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC) {
-			dev_err(&adapter->dev, "lm85: Detected SMSC chip\n");
-			dev_err(&adapter->dev, "lm85: Unrecognized version/stepping 0x%02x"
-			    " Defaulting to Generic LM85.\n", verstep);
-			kind = any_chip;
-		} else if (kind == any_chip
-		    && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC) {
-			dev_err(&adapter->dev, "Generic LM85 Version 6 detected\n");
-			/* Leave kind as "any_chip" */
-		} else {
-			dev_dbg(&adapter->dev, "Autodetection failed\n");
-			/* Not an LM85... */
-			if (kind == any_chip) {  /* User used force=x,y */
-				dev_err(&adapter->dev, "Generic LM85 Version 6 not"
-					" found at %d,0x%02x. Try force_lm85c.\n",
-					i2c_adapter_id(adapter), address);
+		/* All supported chips have the version in common */
+		if ((verstep & LM85_VERSTEP_VMASK) != LM85_VERSTEP_GENERIC) {
+			dev_dbg(&adapter->dev, "Autodetection failed: "
+				"unsupported version\n");
+			return -ENODEV;
+		}
+		kind = any_chip;
+
+		/* Now, refine the detection */
+		if (company == LM85_COMPANY_NATIONAL) {
+			switch (verstep) {
+			case LM85_VERSTEP_LM85C:
+				kind = lm85c;
+				break;
+			case LM85_VERSTEP_LM85B:
+				kind = lm85b;
+				break;
+			}
+		} else if (company == LM85_COMPANY_ANALOG_DEV) {
+			switch (verstep) {
+			case LM85_VERSTEP_ADM1027:
+				kind = adm1027;
+				break;
+			case LM85_VERSTEP_ADT7463:
+			case LM85_VERSTEP_ADT7463C:
+				kind = adt7463;
+				break;
+			}
+		} else if (company == LM85_COMPANY_SMSC) {
+			switch (verstep) {
+			case LM85_VERSTEP_EMC6D100_A0:
+			case LM85_VERSTEP_EMC6D100_A1:
+				/* Note: we can't tell a '100 from a '101 */
+				kind = emc6d100;
+				break;
+			case LM85_VERSTEP_EMC6D102:
+				kind = emc6d102;
+				break;
 			}
-			err = 0;
-			goto ERROR1;
+		} else {
+			dev_dbg(&adapter->dev, "Autodetection failed: "
+				"unknown vendor\n");
+			return -ENODEV;
 		}
 	}
 
-	/* Fill in the chip specific driver values */
 	switch (kind) {
 	case lm85b:
 		type_name = "lm85b";
@@ -1228,16 +1204,36 @@ static int lm85_detect(struct i2c_adapter *adapter, int address,
 	default:
 		type_name = "lm85";
 	}
-	strlcpy(client->name, type_name, I2C_NAME_SIZE);
+	strlcpy(info->type, type_name, I2C_NAME_SIZE);
+
+	return 0;
+}
 
-	/* Fill in the remaining client fields */
-	data->type = kind;
+static int lm85_probe(struct i2c_client *client,
+		      const struct i2c_device_id *id)
+{
+	struct lm85_data *data;
+	int err;
+
+	data = kzalloc(sizeof(struct lm85_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, data);
+	data->type = id->driver_data;
 	mutex_init(&data->update_lock);
 
-	/* Tell the I2C layer a new client has arrived */
-	err = i2c_attach_client(client);
-	if (err)
-		goto ERROR1;
+	/* Fill in the chip specific driver values */
+	switch (data->type) {
+	case adm1027:
+	case adt7463:
+	case emc6d100:
+	case emc6d102:
+		data->freq_map = adm1027_freq_map;
+		break;
+	default:
+		data->freq_map = lm85_freq_map;
+	}
 
 	/* Set the VRM version */
 	data->vrm = vid_which_vrm();
@@ -1248,45 +1244,42 @@ static int lm85_detect(struct i2c_adapter *adapter, int address,
 	/* Register sysfs hooks */
 	err = sysfs_create_group(&client->dev.kobj, &lm85_group);
 	if (err)
-		goto ERROR2;
+		goto err_kfree;
 
 	/* The ADT7463 has an optional VRM 10 mode where pin 21 is used
 	   as a sixth digital VID input rather than an analog input. */
 	data->vid = lm85_read_value(client, LM85_REG_VID);
-	if (!(kind == adt7463 && (data->vid & 0x80)))
+	if (!(data->type == adt7463 && (data->vid & 0x80)))
 		if ((err = sysfs_create_group(&client->dev.kobj,
 					&lm85_group_in4)))
-			goto ERROR3;
+			goto err_remove_files;
 
 	/* The EMC6D100 has 3 additional voltage inputs */
-	if (kind == emc6d100)
+	if (data->type == emc6d100)
 		if ((err = sysfs_create_group(&client->dev.kobj,
 					&lm85_group_in567)))
-			goto ERROR3;
+			goto err_remove_files;
 
 	data->hwmon_dev = hwmon_device_register(&client->dev);
 	if (IS_ERR(data->hwmon_dev)) {
 		err = PTR_ERR(data->hwmon_dev);
-		goto ERROR3;
+		goto err_remove_files;
 	}
 
 	return 0;
 
 	/* Error out and cleanup code */
- ERROR3:
+ err_remove_files:
 	sysfs_remove_group(&client->dev.kobj, &lm85_group);
 	sysfs_remove_group(&client->dev.kobj, &lm85_group_in4);
-	if (kind == emc6d100)
+	if (data->type == emc6d100)
 		sysfs_remove_group(&client->dev.kobj, &lm85_group_in567);
- ERROR2:
-	i2c_detach_client(client);
- ERROR1:
+ err_kfree:
 	kfree(data);
- ERROR0:
 	return err;
 }
 
-static int lm85_detach_client(struct i2c_client *client)
+static int lm85_remove(struct i2c_client *client)
 {
 	struct lm85_data *data = i2c_get_clientdata(client);
 	hwmon_device_unregister(data->hwmon_dev);
@@ -1294,7 +1287,6 @@ static int lm85_detach_client(struct i2c_client *client)
 	sysfs_remove_group(&client->dev.kobj, &lm85_group_in4);
 	if (data->type == emc6d100)
 		sysfs_remove_group(&client->dev.kobj, &lm85_group_in567);
-	i2c_detach_client(client);
 	kfree(data);
 	return 0;
 }
@@ -1481,7 +1473,7 @@ static struct lm85_data *lm85_update_device(struct device *dev)
 			data->autofan[i].config =
 			    lm85_read_value(client, LM85_REG_AFAN_CONFIG(i));
 			val = lm85_read_value(client, LM85_REG_AFAN_RANGE(i));
-			data->autofan[i].freq = val & 0x07;
+			data->pwm_freq[i] = val & 0x07;
 			data->zone[i].range = val >> 4;
 			data->autofan[i].min_pwm =
 			    lm85_read_value(client, LM85_REG_AFAN_MINPWM(i));
diff --git a/drivers/hwmon/lm87.c b/drivers/hwmon/lm87.c
index 21970f0..2e4a3ce 100644
--- a/drivers/hwmon/lm87.c
+++ b/drivers/hwmon/lm87.c
@@ -21,11 +21,10 @@
  *   http://www.national.com/pf/LM/LM87.html
  *
  * Some functions share pins, so not all functions are available at the same
- * time. Which are depends on the hardware setup. This driver assumes that
- * the BIOS configured the chip correctly. In that respect, it  differs from
- * the original driver (from lm_sensors for Linux 2.4), which would force the
- * LM87 to an arbitrary, compile-time chosen mode, regardless of the actual
- * chipset wiring.
+ * time. Which are depends on the hardware setup. This driver normally
+ * assumes that firmware configured the chip correctly. Where this is not
+ * the case, platform code must set the I2C client's platform_data to point
+ * to a u8 value to be written to the channel register.
  * For reference, here is the list of exclusive functions:
  *  - in0+in5 (default) or temp3
  *  - fan1 (default) or in6
@@ -199,6 +198,7 @@ struct lm87_data {
 	unsigned long last_updated; /* In jiffies */
 
 	u8 channel;		/* register value */
+	u8 config;		/* original register value */
 
 	u8 in[8];		/* register value */
 	u8 in_max[8];		/* register value */
@@ -832,6 +832,7 @@ exit_remove:
 	sysfs_remove_group(&new_client->dev.kobj, &lm87_group);
 	sysfs_remove_group(&new_client->dev.kobj, &lm87_group_opt);
 exit_free:
+	lm87_write_value(new_client, LM87_REG_CONFIG, data->config);
 	kfree(data);
 exit:
 	return err;
@@ -840,12 +841,17 @@ exit:
 static void lm87_init_client(struct i2c_client *client)
 {
 	struct lm87_data *data = i2c_get_clientdata(client);
-	u8 config;
 
-	data->channel = lm87_read_value(client, LM87_REG_CHANNEL_MODE);
+	if (client->dev.platform_data) {
+		data->channel = *(u8 *)client->dev.platform_data;
+		lm87_write_value(client,
+				 LM87_REG_CHANNEL_MODE, data->channel);
+	} else {
+		data->channel = lm87_read_value(client, LM87_REG_CHANNEL_MODE);
+	}
+	data->config = lm87_read_value(client, LM87_REG_CONFIG) & 0x6F;
 
-	config = lm87_read_value(client, LM87_REG_CONFIG);
-	if (!(config & 0x01)) {
+	if (!(data->config & 0x01)) {
 		int i;
 
 		/* Limits are left uninitialized after power-up */
@@ -867,11 +873,11 @@ static void lm87_init_client(struct i2c_client *client)
 			lm87_write_value(client, LM87_REG_IN_MAX(0), 0xFF);
 		}
 	}
-	if ((config & 0x81) != 0x01) {
-		/* Start monitoring */
+
+	/* Make sure Start is set and INT#_Clear is clear */
+	if ((data->config & 0x09) != 0x01)
 		lm87_write_value(client, LM87_REG_CONFIG,
-				 (config & 0xF7) | 0x01);
-	}
+				 (data->config & 0x77) | 0x01);
 }
 
 static int lm87_remove(struct i2c_client *client)
@@ -882,6 +888,7 @@ static int lm87_remove(struct i2c_client *client)
 	sysfs_remove_group(&client->dev.kobj, &lm87_group);
 	sysfs_remove_group(&client->dev.kobj, &lm87_group_opt);
 
+	lm87_write_value(client, LM87_REG_CONFIG, data->config);
 	kfree(data);
 	return 0;
 }
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index c24fe36..3edeebc 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -1,14 +1,12 @@
 /*
  * lm90.c - Part of lm_sensors, Linux kernel modules for hardware
  *          monitoring
- * Copyright (C) 2003-2006  Jean Delvare <khali@linux-fr.org>
+ * Copyright (C) 2003-2008  Jean Delvare <khali@linux-fr.org>
  *
  * Based on the lm83 driver. The LM90 is a sensor chip made by National
  * Semiconductor. It reports up to two temperatures (its own plus up to
  * one external one) with a 0.125 deg resolution (1 deg for local
- * temperature) and a 3-4 deg accuracy. Complete datasheet can be
- * obtained from National's website at:
- *   http://www.national.com/pf/LM/LM90.html
+ * temperature) and a 3-4 deg accuracy.
  *
  * This driver also supports the LM89 and LM99, two other sensor chips
  * made by National Semiconductor. Both have an increased remote
@@ -16,48 +14,38 @@
  * additionally shifts remote temperatures (measured and limits) by 16
  * degrees, which allows for higher temperatures measurement. The
  * driver doesn't handle it since it can be done easily in user-space.
- * Complete datasheets can be obtained from National's website at:
- *   http://www.national.com/pf/LM/LM89.html
- *   http://www.national.com/pf/LM/LM99.html
  * Note that there is no way to differentiate between both chips.
  *
  * This driver also supports the LM86, another sensor chip made by
  * National Semiconductor. It is exactly similar to the LM90 except it
  * has a higher accuracy.
- * Complete datasheet can be obtained from National's website at:
- *   http://www.national.com/pf/LM/LM86.html
  *
  * This driver also supports the ADM1032, a sensor chip made by Analog
  * Devices. That chip is similar to the LM90, with a few differences
- * that are not handled by this driver. Complete datasheet can be
- * obtained from Analog's website at:
- *   http://www.analog.com/en/prod/0,2877,ADM1032,00.html
- * Among others, it has a higher accuracy than the LM90, much like the
- * LM86 does.
+ * that are not handled by this driver. Among others, it has a higher
+ * accuracy than the LM90, much like the LM86 does.
  *
  * This driver also supports the MAX6657, MAX6658 and MAX6659 sensor
- * chips made by Maxim. These chips are similar to the LM86. Complete
- * datasheet can be obtained at Maxim's website at:
- *   http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578
+ * chips made by Maxim. These chips are similar to the LM86.
  * Note that there is no easy way to differentiate between the three
  * variants. The extra address and features of the MAX6659 are not
  * supported by this driver. These chips lack the remote temperature
  * offset feature.
  *
+ * This driver also supports the MAX6646, MAX6647 and MAX6649 chips
+ * made by Maxim.  These are again similar to the LM86, but they use
+ * unsigned temperature values and can report temperatures from 0 to
+ * 145 degrees.
+ *
  * This driver also supports the MAX6680 and MAX6681, two other sensor
  * chips made by Maxim. These are quite similar to the other Maxim
- * chips. Complete datasheet can be obtained at:
- *   http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3370
- * The MAX6680 and MAX6681 only differ in the pinout so they can be
- * treated identically.
+ * chips. The MAX6680 and MAX6681 only differ in the pinout so they can
+ * be treated identically.
  *
- * This driver also supports the ADT7461 chip from Analog Devices but
- * only in its "compatability mode". If an ADT7461 chip is found but
- * is configured in non-compatible mode (where its temperature
- * register values are decoded differently) it is ignored by this
- * driver. Complete datasheet can be obtained from Analog's website
- * at:
- *   http://www.analog.com/en/prod/0,2877,ADT7461,00.html
+ * This driver also supports the ADT7461 chip from Analog Devices.
+ * It's supported in both compatibility and extended mode. It is mostly
+ * compatible with LM90 except for a data format difference for the
+ * temperature value registers.
  *
  * Since the LM90 was the first chipset supported by this driver, most
  * comments will refer to this chipset, but are actually general and
@@ -93,9 +81,10 @@
  * Addresses to scan
  * Address is fully defined internally and cannot be changed except for
  * MAX6659, MAX6680 and MAX6681.
- * LM86, LM89, LM90, LM99, ADM1032, ADM1032-1, ADT7461, MAX6657 and MAX6658
- * have address 0x4c.
- * ADM1032-2, ADT7461-2, LM89-1, and LM99-1 have address 0x4d.
+ * LM86, LM89, LM90, LM99, ADM1032, ADM1032-1, ADT7461, MAX6649, MAX6657
+ * and MAX6658 have address 0x4c.
+ * ADM1032-2, ADT7461-2, LM89-1, LM99-1 and MAX6646 have address 0x4d.
+ * MAX6647 has address 0x4e.
  * MAX6659 can have address 0x4c, 0x4d or 0x4e (unsupported).
  * MAX6680 and MAX6681 can have address 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b,
  * 0x4c, 0x4d or 0x4e.
@@ -108,7 +97,8 @@ static const unsigned short normal_i2c[] = {
  * Insmod parameters
  */
 
-I2C_CLIENT_INSMOD_7(lm90, adm1032, lm99, lm86, max6657, adt7461, max6680);
+I2C_CLIENT_INSMOD_8(lm90, adm1032, lm99, lm86, max6657, adt7461, max6680,
+		    max6646);
 
 /*
  * The LM90 registers
@@ -149,39 +139,14 @@ I2C_CLIENT_INSMOD_7(lm90, adm1032, lm99, lm86, max6657, adt7461, max6680);
 #define LM90_REG_R_TCRIT_HYST		0x21
 #define LM90_REG_W_TCRIT_HYST		0x21
 
-/*
- * Conversions and various macros
- * For local temperatures and limits, critical limits and the hysteresis
- * value, the LM90 uses signed 8-bit values with LSB = 1 degree Celsius.
- * For remote temperatures and limits, it uses signed 11-bit values with
- * LSB = 0.125 degree Celsius, left-justified in 16-bit registers.
- */
+/* MAX6646/6647/6649/6657/6658/6659 registers */
 
-#define TEMP1_FROM_REG(val)	((val) * 1000)
-#define TEMP1_TO_REG(val)	((val) <= -128000 ? -128 : \
-				 (val) >= 127000 ? 127 : \
-				 (val) < 0 ? ((val) - 500) / 1000 : \
-				 ((val) + 500) / 1000)
-#define TEMP2_FROM_REG(val)	((val) / 32 * 125)
-#define TEMP2_TO_REG(val)	((val) <= -128000 ? 0x8000 : \
-				 (val) >= 127875 ? 0x7FE0 : \
-				 (val) < 0 ? ((val) - 62) / 125 * 32 : \
-				 ((val) + 62) / 125 * 32)
-#define HYST_TO_REG(val)	((val) <= 0 ? 0 : (val) >= 30500 ? 31 : \
-				 ((val) + 500) / 1000)
-
-/* 
- * ADT7461 is almost identical to LM90 except that attempts to write
- * values that are outside the range 0 < temp < 127 are treated as
- * the boundary value. 
- */
+#define MAX6657_REG_R_LOCAL_TEMPL	0x11
 
-#define TEMP1_TO_REG_ADT7461(val) ((val) <= 0 ? 0 : \
-				 (val) >= 127000 ? 127 : \
-				 ((val) + 500) / 1000)
-#define TEMP2_TO_REG_ADT7461(val) ((val) <= 0 ? 0 : \
-				 (val) >= 127750 ? 0x7FC0 : \
-				 ((val) + 125) / 250 * 64)
+/*
+ * Device flags
+ */
+#define LM90_FLAG_ADT7461_EXT		0x01	/* ADT7461 extended mode */
 
 /*
  * Functions declaration
@@ -206,6 +171,9 @@ static const struct i2c_device_id lm90_id[] = {
 	{ "lm86", lm86 },
 	{ "lm89", lm99 },
 	{ "lm99", lm99 },	/* Missing temperature offset */
+	{ "max6646", max6646 },
+	{ "max6647", max6646 },
+	{ "max6649", max6646 },
 	{ "max6657", max6657 },
 	{ "max6658", max6657 },
 	{ "max6659", max6657 },
@@ -237,22 +205,150 @@ struct lm90_data {
 	char valid; /* zero until following fields are valid */
 	unsigned long last_updated; /* in jiffies */
 	int kind;
+	int flags;
 
 	/* registers values */
-	s8 temp8[5];	/* 0: local input
-			   1: local low limit
-			   2: local high limit
-			   3: local critical limit
-			   4: remote critical limit */
-	s16 temp11[4];	/* 0: remote input
+	s8 temp8[4];	/* 0: local low limit
+			   1: local high limit
+			   2: local critical limit
+			   3: remote critical limit */
+	s16 temp11[5];	/* 0: remote input
 			   1: remote low limit
 			   2: remote high limit
-			   3: remote offset (except max6657) */
+			   3: remote offset (except max6646 and max6657)
+			   4: local input */
 	u8 temp_hyst;
 	u8 alarms; /* bitvector */
 };
 
 /*
+ * Conversions
+ * For local temperatures and limits, critical limits and the hysteresis
+ * value, the LM90 uses signed 8-bit values with LSB = 1 degree Celsius.
+ * For remote temperatures and limits, it uses signed 11-bit values with
+ * LSB = 0.125 degree Celsius, left-justified in 16-bit registers.  Some
+ * Maxim chips use unsigned values.
+ */
+
+static inline int temp_from_s8(s8 val)
+{
+	return val * 1000;
+}
+
+static inline int temp_from_u8(u8 val)
+{
+	return val * 1000;
+}
+
+static inline int temp_from_s16(s16 val)
+{
+	return val / 32 * 125;
+}
+
+static inline int temp_from_u16(u16 val)
+{
+	return val / 32 * 125;
+}
+
+static s8 temp_to_s8(long val)
+{
+	if (val <= -128000)
+		return -128;
+	if (val >= 127000)
+		return 127;
+	if (val < 0)
+		return (val - 500) / 1000;
+	return (val + 500) / 1000;
+}
+
+static u8 temp_to_u8(long val)
+{
+	if (val <= 0)
+		return 0;
+	if (val >= 255000)
+		return 255;
+	return (val + 500) / 1000;
+}
+
+static s16 temp_to_s16(long val)
+{
+	if (val <= -128000)
+		return 0x8000;
+	if (val >= 127875)
+		return 0x7FE0;
+	if (val < 0)
+		return (val - 62) / 125 * 32;
+	return (val + 62) / 125 * 32;
+}
+
+static u8 hyst_to_reg(long val)
+{
+	if (val <= 0)
+		return 0;
+	if (val >= 30500)
+		return 31;
+	return (val + 500) / 1000;
+}
+
+/*
+ * ADT7461 in compatibility mode is almost identical to LM90 except that
+ * attempts to write values that are outside the range 0 < temp < 127 are
+ * treated as the boundary value.
+ *
+ * ADT7461 in "extended mode" operation uses unsigned integers offset by
+ * 64 (e.g., 0 -> -64 degC).  The range is restricted to -64..191 degC.
+ */
+static inline int temp_from_u8_adt7461(struct lm90_data *data, u8 val)
+{
+	if (data->flags & LM90_FLAG_ADT7461_EXT)
+		return (val - 64) * 1000;
+	else
+		return temp_from_s8(val);
+}
+
+static inline int temp_from_u16_adt7461(struct lm90_data *data, u16 val)
+{
+	if (data->flags & LM90_FLAG_ADT7461_EXT)
+		return (val - 0x4000) / 64 * 250;
+	else
+		return temp_from_s16(val);
+}
+
+static u8 temp_to_u8_adt7461(struct lm90_data *data, long val)
+{
+	if (data->flags & LM90_FLAG_ADT7461_EXT) {
+		if (val <= -64000)
+			return 0;
+		if (val >= 191000)
+			return 0xFF;
+		return (val + 500 + 64000) / 1000;
+	} else {
+		if (val <= 0)
+			return 0;
+		if (val >= 127000)
+			return 127;
+		return (val + 500) / 1000;
+	}
+}
+
+static u16 temp_to_u16_adt7461(struct lm90_data *data, long val)
+{
+	if (data->flags & LM90_FLAG_ADT7461_EXT) {
+		if (val <= -64000)
+			return 0;
+		if (val >= 191750)
+			return 0xFFC0;
+		return (val + 64000 + 125) / 250 * 64;
+	} else {
+		if (val <= 0)
+			return 0;
+		if (val >= 127750)
+			return 0x7FC0;
+		return (val + 125) / 250 * 64;
+	}
+}
+
+/*
  * Sysfs stuff
  */
 
@@ -261,7 +357,16 @@ static ssize_t show_temp8(struct device *dev, struct device_attribute *devattr,
 {
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 	struct lm90_data *data = lm90_update_device(dev);
-	return sprintf(buf, "%d\n", TEMP1_FROM_REG(data->temp8[attr->index]));
+	int temp;
+
+	if (data->kind == adt7461)
+		temp = temp_from_u8_adt7461(data, data->temp8[attr->index]);
+	else if (data->kind == max6646)
+		temp = temp_from_u8(data->temp8[attr->index]);
+	else
+		temp = temp_from_s8(data->temp8[attr->index]);
+
+	return sprintf(buf, "%d\n", temp);
 }
 
 static ssize_t set_temp8(struct device *dev, struct device_attribute *devattr,
@@ -282,10 +387,12 @@ static ssize_t set_temp8(struct device *dev, struct device_attribute *devattr,
 
 	mutex_lock(&data->update_lock);
 	if (data->kind == adt7461)
-		data->temp8[nr] = TEMP1_TO_REG_ADT7461(val);
+		data->temp8[nr] = temp_to_u8_adt7461(data, val);
+	else if (data->kind == max6646)
+		data->temp8[nr] = temp_to_u8(val);
 	else
-		data->temp8[nr] = TEMP1_TO_REG(val);
-	i2c_smbus_write_byte_data(client, reg[nr - 1], data->temp8[nr]);
+		data->temp8[nr] = temp_to_s8(val);
+	i2c_smbus_write_byte_data(client, reg[nr], data->temp8[nr]);
 	mutex_unlock(&data->update_lock);
 	return count;
 }
@@ -295,7 +402,16 @@ static ssize_t show_temp11(struct device *dev, struct device_attribute *devattr,
 {
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 	struct lm90_data *data = lm90_update_device(dev);
-	return sprintf(buf, "%d\n", TEMP2_FROM_REG(data->temp11[attr->index]));
+	int temp;
+
+	if (data->kind == adt7461)
+		temp = temp_from_u16_adt7461(data, data->temp11[attr->index]);
+	else if (data->kind == max6646)
+		temp = temp_from_u16(data->temp11[attr->index]);
+	else
+		temp = temp_from_s16(data->temp11[attr->index]);
+
+	return sprintf(buf, "%d\n", temp);
 }
 
 static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr,
@@ -318,13 +434,20 @@ static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr,
 
 	mutex_lock(&data->update_lock);
 	if (data->kind == adt7461)
-		data->temp11[nr] = TEMP2_TO_REG_ADT7461(val);
+		data->temp11[nr] = temp_to_u16_adt7461(data, val);
+	else if (data->kind == max6657 || data->kind == max6680)
+		data->temp11[nr] = temp_to_s8(val) << 8;
+	else if (data->kind == max6646)
+		data->temp11[nr] = temp_to_u8(val) << 8;
 	else
-		data->temp11[nr] = TEMP2_TO_REG(val);
+		data->temp11[nr] = temp_to_s16(val);
+
 	i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2],
 				  data->temp11[nr] >> 8);
-	i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2 + 1],
-				  data->temp11[nr] & 0xff);
+	if (data->kind != max6657 && data->kind != max6680
+	    && data->kind != max6646)
+		i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2 + 1],
+					  data->temp11[nr] & 0xff);
 	mutex_unlock(&data->update_lock);
 	return count;
 }
@@ -334,8 +457,14 @@ static ssize_t show_temphyst(struct device *dev, struct device_attribute *devatt
 {
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 	struct lm90_data *data = lm90_update_device(dev);
-	return sprintf(buf, "%d\n", TEMP1_FROM_REG(data->temp8[attr->index])
-		       - TEMP1_FROM_REG(data->temp_hyst));
+	int temp;
+
+	if (data->kind == adt7461)
+		temp = temp_from_u8_adt7461(data, data->temp8[attr->index]);
+	else
+		temp = temp_from_s8(data->temp8[attr->index]);
+
+	return sprintf(buf, "%d\n", temp - temp_from_s8(data->temp_hyst));
 }
 
 static ssize_t set_temphyst(struct device *dev, struct device_attribute *dummy,
@@ -347,9 +476,9 @@ static ssize_t set_temphyst(struct device *dev, struct device_attribute *dummy,
 	long hyst;
 
 	mutex_lock(&data->update_lock);
-	hyst = TEMP1_FROM_REG(data->temp8[3]) - val;
+	hyst = temp_from_s8(data->temp8[2]) - val;
 	i2c_smbus_write_byte_data(client, LM90_REG_W_TCRIT_HYST,
-				  HYST_TO_REG(hyst));
+				  hyst_to_reg(hyst));
 	mutex_unlock(&data->update_lock);
 	return count;
 }
@@ -371,23 +500,23 @@ static ssize_t show_alarm(struct device *dev, struct device_attribute
 	return sprintf(buf, "%d\n", (data->alarms >> bitnr) & 1);
 }
 
-static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp8, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp11, NULL, 4);
 static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp11, NULL, 0);
 static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp8,
-	set_temp8, 1);
+	set_temp8, 0);
 static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp11,
 	set_temp11, 1);
 static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp8,
-	set_temp8, 2);
+	set_temp8, 1);
 static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp11,
 	set_temp11, 2);
 static SENSOR_DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, show_temp8,
-	set_temp8, 3);
+	set_temp8, 2);
 static SENSOR_DEVICE_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_temp8,
-	set_temp8, 4);
+	set_temp8, 3);
 static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_temphyst,
-	set_temphyst, 3);
-static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IRUGO, show_temphyst, NULL, 4);
+	set_temphyst, 2);
+static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IRUGO, show_temphyst, NULL, 3);
 static SENSOR_DEVICE_ATTR(temp2_offset, S_IWUSR | S_IRUGO, show_temp11,
 	set_temp11, 3);
 
@@ -568,7 +697,7 @@ static int lm90_detect(struct i2c_client *new_client, int kind,
 				kind = adm1032;
 			} else
 			if (chip_id == 0x51 /* ADT7461 */
-			 && (reg_config1 & 0x1F) == 0x00 /* check compat mode */
+			 && (reg_config1 & 0x1B) == 0x00
 			 && reg_convrate <= 0x0A) {
 				kind = adt7461;
 			}
@@ -599,13 +728,23 @@ static int lm90_detect(struct i2c_client *new_client, int kind,
 			 && (reg_config1 & 0x03) == 0x00
 			 && reg_convrate <= 0x07) {
 			 	kind = max6680;
+			} else
+			/* The chip_id register of the MAX6646/6647/6649
+			 * holds the revision of the chip.
+			 * The lowest 6 bits of the config1 register are
+			 * unused and should return zero when read.
+			 */
+			if (chip_id == 0x59
+			 && (reg_config1 & 0x3f) == 0x00
+			 && reg_convrate <= 0x07) {
+				kind = max6646;
 			}
 		}
 
 		if (kind <= 0) { /* identification failed */
-			dev_info(&adapter->dev,
-			    "Unsupported chip (man_id=0x%02X, "
-			    "chip_id=0x%02X).\n", man_id, chip_id);
+			dev_dbg(&adapter->dev,
+				"Unsupported chip at 0x%02x (man_id=0x%02X, "
+				"chip_id=0x%02X)\n", address, man_id, chip_id);
 			return -ENODEV;
 		}
 	}
@@ -629,6 +768,8 @@ static int lm90_detect(struct i2c_client *new_client, int kind,
 		name = "max6680";
 	} else if (kind == adt7461) {
 		name = "adt7461";
+	} else if (kind == max6646) {
+		name = "max6646";
 	}
 	strlcpy(info->type, name, I2C_NAME_SIZE);
 
@@ -668,7 +809,7 @@ static int lm90_probe(struct i2c_client *new_client,
 					      &dev_attr_pec)))
 			goto exit_remove_files;
 	}
-	if (data->kind != max6657) {
+	if (data->kind != max6657 && data->kind != max6646) {
 		if ((err = device_create_file(&new_client->dev,
 				&sensor_dev_attr_temp2_offset.dev_attr)))
 			goto exit_remove_files;
@@ -707,6 +848,12 @@ static void lm90_init_client(struct i2c_client *client)
 	}
 	config_orig = config;
 
+	/* Check Temperature Range Select */
+	if (data->kind == adt7461) {
+		if (config & 0x04)
+			data->flags |= LM90_FLAG_ADT7461_EXT;
+	}
+
 	/*
 	 * Put MAX6680/MAX8881 into extended resolution (bit 0x10,
 	 * 0.125 degree resolution) and range (0x08, extend range
@@ -728,7 +875,7 @@ static int lm90_remove(struct i2c_client *client)
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &lm90_group);
 	device_remove_file(&client->dev, &dev_attr_pec);
-	if (data->kind != max6657)
+	if (data->kind != max6657 && data->kind != max6646)
 		device_remove_file(&client->dev,
 				   &sensor_dev_attr_temp2_offset.dev_attr);
 
@@ -736,6 +883,38 @@ static int lm90_remove(struct i2c_client *client)
 	return 0;
 }
 
+static int lm90_read16(struct i2c_client *client, u8 regh, u8 regl, u16 *value)
+{
+	int err;
+	u8 oldh, newh, l;
+
+	/*
+	 * There is a trick here. We have to read two registers to have the
+	 * sensor temperature, but we have to beware a conversion could occur
+	 * inbetween the readings. The datasheet says we should either use
+	 * the one-shot conversion register, which we don't want to do
+	 * (disables hardware monitoring) or monitor the busy bit, which is
+	 * impossible (we can't read the values and monitor that bit at the
+	 * exact same time). So the solution used here is to read the high
+	 * byte once, then the low byte, then the high byte again. If the new
+	 * high byte matches the old one, then we have a valid reading. Else
+	 * we have to read the low byte again, and now we believe we have a
+	 * correct reading.
+	 */
+	if ((err = lm90_read_reg(client, regh, &oldh))
+	 || (err = lm90_read_reg(client, regl, &l))
+	 || (err = lm90_read_reg(client, regh, &newh)))
+		return err;
+	if (oldh != newh) {
+		err = lm90_read_reg(client, regl, &l);
+		if (err)
+			return err;
+	}
+	*value = (newh << 8) | l;
+
+	return 0;
+}
+
 static struct lm90_data *lm90_update_device(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
@@ -744,49 +923,50 @@ static struct lm90_data *lm90_update_device(struct device *dev)
 	mutex_lock(&data->update_lock);
 
 	if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
-		u8 oldh, newh, l;
+		u8 h, l;
 
 		dev_dbg(&client->dev, "Updating lm90 data.\n");
-		lm90_read_reg(client, LM90_REG_R_LOCAL_TEMP, &data->temp8[0]);
-		lm90_read_reg(client, LM90_REG_R_LOCAL_LOW, &data->temp8[1]);
-		lm90_read_reg(client, LM90_REG_R_LOCAL_HIGH, &data->temp8[2]);
-		lm90_read_reg(client, LM90_REG_R_LOCAL_CRIT, &data->temp8[3]);
-		lm90_read_reg(client, LM90_REG_R_REMOTE_CRIT, &data->temp8[4]);
+		lm90_read_reg(client, LM90_REG_R_LOCAL_LOW, &data->temp8[0]);
+		lm90_read_reg(client, LM90_REG_R_LOCAL_HIGH, &data->temp8[1]);
+		lm90_read_reg(client, LM90_REG_R_LOCAL_CRIT, &data->temp8[2]);
+		lm90_read_reg(client, LM90_REG_R_REMOTE_CRIT, &data->temp8[3]);
 		lm90_read_reg(client, LM90_REG_R_TCRIT_HYST, &data->temp_hyst);
 
-		/*
-		 * There is a trick here. We have to read two registers to
-		 * have the remote sensor temperature, but we have to beware
-		 * a conversion could occur inbetween the readings. The
-		 * datasheet says we should either use the one-shot
-		 * conversion register, which we don't want to do (disables
-		 * hardware monitoring) or monitor the busy bit, which is
-		 * impossible (we can't read the values and monitor that bit
-		 * at the exact same time). So the solution used here is to
-		 * read the high byte once, then the low byte, then the high
-		 * byte again. If the new high byte matches the old one,
-		 * then we have a valid reading. Else we have to read the low
-		 * byte again, and now we believe we have a correct reading.
-		 */
-		if (lm90_read_reg(client, LM90_REG_R_REMOTE_TEMPH, &oldh) == 0
-		 && lm90_read_reg(client, LM90_REG_R_REMOTE_TEMPL, &l) == 0
-		 && lm90_read_reg(client, LM90_REG_R_REMOTE_TEMPH, &newh) == 0
-		 && (newh == oldh
-		  || lm90_read_reg(client, LM90_REG_R_REMOTE_TEMPL, &l) == 0))
-			data->temp11[0] = (newh << 8) | l;
-
-		if (lm90_read_reg(client, LM90_REG_R_REMOTE_LOWH, &newh) == 0
-		 && lm90_read_reg(client, LM90_REG_R_REMOTE_LOWL, &l) == 0)
-			data->temp11[1] = (newh << 8) | l;
-		if (lm90_read_reg(client, LM90_REG_R_REMOTE_HIGHH, &newh) == 0
-		 && lm90_read_reg(client, LM90_REG_R_REMOTE_HIGHL, &l) == 0)
-			data->temp11[2] = (newh << 8) | l;
-		if (data->kind != max6657) {
+		if (data->kind == max6657 || data->kind == max6646) {
+			lm90_read16(client, LM90_REG_R_LOCAL_TEMP,
+				    MAX6657_REG_R_LOCAL_TEMPL,
+				    &data->temp11[4]);
+		} else {
+			if (lm90_read_reg(client, LM90_REG_R_LOCAL_TEMP,
+					  &h) == 0)
+				data->temp11[4] = h << 8;
+		}
+		lm90_read16(client, LM90_REG_R_REMOTE_TEMPH,
+			    LM90_REG_R_REMOTE_TEMPL, &data->temp11[0]);
+
+		if (lm90_read_reg(client, LM90_REG_R_REMOTE_LOWH, &h) == 0) {
+			data->temp11[1] = h << 8;
+			if (data->kind != max6657 && data->kind != max6680
+			 && data->kind != max6646
+			 && lm90_read_reg(client, LM90_REG_R_REMOTE_LOWL,
+					  &l) == 0)
+				data->temp11[1] |= l;
+		}
+		if (lm90_read_reg(client, LM90_REG_R_REMOTE_HIGHH, &h) == 0) {
+			data->temp11[2] = h << 8;
+			if (data->kind != max6657 && data->kind != max6680
+			 && data->kind != max6646
+			 && lm90_read_reg(client, LM90_REG_R_REMOTE_HIGHL,
+					  &l) == 0)
+				data->temp11[2] |= l;
+		}
+
+		if (data->kind != max6657 && data->kind != max6646) {
 			if (lm90_read_reg(client, LM90_REG_R_REMOTE_OFFSH,
-					  &newh) == 0
+					  &h) == 0
 			 && lm90_read_reg(client, LM90_REG_R_REMOTE_OFFSL,
 					  &l) == 0)
-				data->temp11[3] = (newh << 8) | l;
+				data->temp11[3] = (h << 8) | l;
 		}
 		lm90_read_reg(client, LM90_REG_R_STATUS, &data->alarms);
 
diff --git a/drivers/hwmon/max1619.c b/drivers/hwmon/max1619.c
index 1ab1cac..7897754 100644
--- a/drivers/hwmon/max1619.c
+++ b/drivers/hwmon/max1619.c
@@ -69,11 +69,18 @@ I2C_CLIENT_INSMOD_1(max1619);
 #define MAX1619_REG_W_TCRIT_HYST	0x13
 
 /*
- * Conversions and various macros
+ * Conversions
  */
 
-#define TEMP_FROM_REG(val)	((val & 0x80 ? val-0x100 : val) * 1000)
-#define TEMP_TO_REG(val)	((val < 0 ? val+0x100*1000 : val) / 1000)
+static int temp_from_reg(int val)
+{
+	return (val & 0x80 ? val-0x100 : val) * 1000;
+}
+
+static int temp_to_reg(int val)
+{
+	return (val < 0 ? val+0x100*1000 : val) / 1000;
+}
 
 /*
  * Functions declaration
@@ -135,7 +142,7 @@ struct max1619_data {
 static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf) \
 { \
 	struct max1619_data *data = max1619_update_device(dev); \
-	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->value)); \
+	return sprintf(buf, "%d\n", temp_from_reg(data->value)); \
 }
 show_temp(temp_input1);
 show_temp(temp_input2);
@@ -153,7 +160,7 @@ static ssize_t set_##value(struct device *dev, struct device_attribute *attr, co
 	long val = simple_strtol(buf, NULL, 10); \
  \
 	mutex_lock(&data->update_lock); \
-	data->value = TEMP_TO_REG(val); \
+	data->value = temp_to_reg(val); \
 	i2c_smbus_write_byte_data(client, reg, data->value); \
 	mutex_unlock(&data->update_lock); \
 	return count; \
diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index f942ecd..d4d1b85 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -4,7 +4,7 @@
     Copyright (c) 1998 - 2001  Frodo Looijaard <frodol@dds.nl>,
                                Philip Edelbrock <phil@netroedge.com>,
                                and Mark Studebaker <mdsxyz123@yahoo.com>
-    Copyright (c) 2007         Jean Delvare <khali@linux-fr.org>
+    Copyright (c) 2007 - 2008  Jean Delvare <khali@linux-fr.org>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
@@ -38,25 +38,24 @@
 #include <linux/slab.h>
 #include <linux/jiffies.h>
 #include <linux/i2c.h>
-#include <linux/platform_device.h>
-#include <linux/ioport.h>
 #include <linux/hwmon.h>
 #include <linux/hwmon-vid.h>
 #include <linux/hwmon-sysfs.h>
 #include <linux/sysfs.h>
 #include <linux/err.h>
 #include <linux/mutex.h>
+
+#ifdef CONFIG_ISA
+#include <linux/platform_device.h>
+#include <linux/ioport.h>
 #include <asm/io.h>
-#include "lm75.h"
+#endif
 
-/* ISA device, if found */
-static struct platform_device *pdev;
+#include "lm75.h"
 
 /* Addresses to scan */
 static const unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d,
 						0x2e, 0x2f, I2C_CLIENT_END };
-static unsigned short isa_address = 0x290;
-
 /* Insmod parameters */
 I2C_CLIENT_INSMOD_4(w83781d, w83782d, w83783s, as99127f);
 I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: "
@@ -178,9 +177,9 @@ FAN_FROM_REG(u8 val, int div)
 #define TEMP_FROM_REG(val)		((val) * 1000)
 
 #define BEEP_MASK_FROM_REG(val,type)	((type) == as99127f ? \
-					 (val) ^ 0x7fff : (val))
+					 (~(val)) & 0x7fff : (val) & 0xff7fff)
 #define BEEP_MASK_TO_REG(val,type)	((type) == as99127f ? \
-					 (~(val)) & 0x7fff : (val) & 0xffffff)
+					 (~(val)) & 0x7fff : (val) & 0xff7fff)
 
 #define DIV_FROM_REG(val)		(1 << (val))
 
@@ -199,25 +198,16 @@ DIV_TO_REG(long val, enum chips type)
 	return i;
 }
 
-/* There are some complications in a module like this. First off, W83781D chips
-   may be both present on the SMBus and the ISA bus, and we have to handle
-   those cases separately at some places. Second, there might be several
-   W83781D chips available (well, actually, that is probably never done; but
-   it is a clean illustration of how to handle a case like that). Finally,
-   a specific chip may be attached to *both* ISA and SMBus, and we would
-   not like to detect it double. Fortunately, in the case of the W83781D at
-   least, a register tells us what SMBus address we are on, so that helps
-   a bit - except if there could be more than one SMBus. Groan. No solution
-   for this yet. */
-
-/* For ISA chips, we abuse the i2c_client addr and name fields. We also use
-   the driver field to differentiate between I2C and ISA chips. */
 struct w83781d_data {
-	struct i2c_client client;
+	struct i2c_client *client;
 	struct device *hwmon_dev;
 	struct mutex lock;
 	enum chips type;
 
+	/* For ISA device only */
+	const char *name;
+	int isa_addr;
+
 	struct mutex update_lock;
 	char valid;		/* !=0 if following fields are valid */
 	unsigned long last_updated;	/* In jiffies */
@@ -240,7 +230,6 @@ struct w83781d_data {
 	u8 vid;			/* Register encoding, combined */
 	u32 alarms;		/* Register encoding, combined */
 	u32 beep_mask;		/* Register encoding, combined */
-	u8 beep_enable;		/* Boolean */
 	u8 pwm[4];		/* Register value */
 	u8 pwm2_enable;		/* Boolean */
 	u16 sens[3];		/* 782D/783S only.
@@ -249,36 +238,14 @@ struct w83781d_data {
 	u8 vrm;
 };
 
-static int w83781d_attach_adapter(struct i2c_adapter *adapter);
-static int w83781d_detect(struct i2c_adapter *adapter, int address, int kind);
-static int w83781d_detach_client(struct i2c_client *client);
-
-static int __devinit w83781d_isa_probe(struct platform_device *pdev);
-static int __devexit w83781d_isa_remove(struct platform_device *pdev);
+static struct w83781d_data *w83781d_data_if_isa(void);
+static int w83781d_alias_detect(struct i2c_client *client, u8 chipid);
 
 static int w83781d_read_value(struct w83781d_data *data, u16 reg);
 static int w83781d_write_value(struct w83781d_data *data, u16 reg, u16 value);
 static struct w83781d_data *w83781d_update_device(struct device *dev);
 static void w83781d_init_device(struct device *dev);
 
-static struct i2c_driver w83781d_driver = {
-	.driver = {
-		.name = "w83781d",
-	},
-	.attach_adapter = w83781d_attach_adapter,
-	.detach_client = w83781d_detach_client,
-};
-
-static struct platform_driver w83781d_isa_driver = {
-	.driver = {
-		.owner = THIS_MODULE,
-		.name = "w83781d",
-	},
-	.probe = w83781d_isa_probe,
-	.remove = w83781d_isa_remove,
-};
-
-
 /* following are the sysfs callback functions */
 #define show_in_reg(reg) \
 static ssize_t show_##reg (struct device *dev, struct device_attribute *da, \
@@ -513,11 +480,6 @@ static ssize_t show_beep_mask (struct device *dev, struct device_attribute *attr
 	return sprintf(buf, "%ld\n",
 		       (long)BEEP_MASK_FROM_REG(data->beep_mask, data->type));
 }
-static ssize_t show_beep_enable (struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct w83781d_data *data = w83781d_update_device(dev);
-	return sprintf(buf, "%ld\n", (long)data->beep_enable);
-}
 
 static ssize_t
 store_beep_mask(struct device *dev, struct device_attribute *attr,
@@ -529,12 +491,12 @@ store_beep_mask(struct device *dev, struct device_attribute *attr,
 	val = simple_strtoul(buf, NULL, 10);
 
 	mutex_lock(&data->update_lock);
-	data->beep_mask = BEEP_MASK_TO_REG(val, data->type);
+	data->beep_mask &= 0x8000; /* preserve beep enable */
+	data->beep_mask |= BEEP_MASK_TO_REG(val, data->type);
 	w83781d_write_value(data, W83781D_REG_BEEP_INTS1,
 			    data->beep_mask & 0xff);
 	w83781d_write_value(data, W83781D_REG_BEEP_INTS2,
-			    ((data->beep_mask >> 8) & 0x7f)
-			    | data->beep_enable << 7);
+			    (data->beep_mask >> 8) & 0xff);
 	if (data->type != w83781d && data->type != as99127f) {
 		w83781d_write_value(data, W83781D_REG_BEEP_INTS3,
 				    ((data->beep_mask) >> 16) & 0xff);
@@ -544,31 +506,8 @@ store_beep_mask(struct device *dev, struct device_attribute *attr,
 	return count;
 }
 
-static ssize_t
-store_beep_enable(struct device *dev, struct device_attribute *attr,
-		const char *buf, size_t count)
-{
-	struct w83781d_data *data = dev_get_drvdata(dev);
-	u32 val;
-
-	val = simple_strtoul(buf, NULL, 10);
-	if (val != 0 && val != 1)
-		return -EINVAL;
-
-	mutex_lock(&data->update_lock);
-	data->beep_enable = val;
-	val = w83781d_read_value(data, W83781D_REG_BEEP_INTS2) & 0x7f;
-	val |= data->beep_enable << 7;
-	w83781d_write_value(data, W83781D_REG_BEEP_INTS2, val);
-	mutex_unlock(&data->update_lock);
-
-	return count;
-}
-
 static DEVICE_ATTR(beep_mask, S_IRUGO | S_IWUSR,
 		show_beep_mask, store_beep_mask);
-static DEVICE_ATTR(beep_enable, S_IRUGO | S_IWUSR,
-		show_beep_enable, store_beep_enable);
 
 static ssize_t show_beep(struct device *dev, struct device_attribute *attr,
 		char *buf)
@@ -663,6 +602,8 @@ static SENSOR_DEVICE_ATTR(temp2_beep, S_IRUGO | S_IWUSR,
 			show_beep, store_beep, 5);
 static SENSOR_DEVICE_ATTR(temp3_beep, S_IRUGO,
 			show_temp3_beep, store_beep, 13);
+static SENSOR_DEVICE_ATTR(beep_enable, S_IRUGO | S_IWUSR,
+			show_beep, store_beep, 15);
 
 static ssize_t
 show_fan_div(struct device *dev, struct device_attribute *da, char *buf)
@@ -866,45 +807,19 @@ static SENSOR_DEVICE_ATTR(temp2_type, S_IRUGO | S_IWUSR,
 static SENSOR_DEVICE_ATTR(temp3_type, S_IRUGO | S_IWUSR,
 	show_sensor, store_sensor, 2);
 
-/* I2C devices get this name attribute automatically, but for ISA devices
-   we must create it by ourselves. */
-static ssize_t
-show_name(struct device *dev, struct device_attribute *devattr, char *buf)
-{
-	struct w83781d_data *data = dev_get_drvdata(dev);
-	return sprintf(buf, "%s\n", data->client.name);
-}
-static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
-
-/* This function is called when:
-     * w83781d_driver is inserted (when this module is loaded), for each
-       available adapter
-     * when a new adapter is inserted (and w83781d_driver is still present) */
-static int
-w83781d_attach_adapter(struct i2c_adapter *adapter)
-{
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
-	return i2c_probe(adapter, &addr_data, w83781d_detect);
-}
-
 /* Assumes that adapter is of I2C, not ISA variety.
  * OTHERWISE DON'T CALL THIS
  */
 static int
-w83781d_detect_subclients(struct i2c_adapter *adapter, int address, int kind,
-		struct i2c_client *new_client)
+w83781d_detect_subclients(struct i2c_client *new_client)
 {
 	int i, val1 = 0, id;
 	int err;
-	const char *client_name = "";
+	int address = new_client->addr;
+	unsigned short sc_addr[2];
+	struct i2c_adapter *adapter = new_client->adapter;
 	struct w83781d_data *data = i2c_get_clientdata(new_client);
-
-	data->lm75[0] = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
-	if (!(data->lm75[0])) {
-		err = -ENOMEM;
-		goto ERROR_SC_0;
-	}
+	enum chips kind = data->type;
 
 	id = i2c_adapter_id(adapter);
 
@@ -922,55 +837,35 @@ w83781d_detect_subclients(struct i2c_adapter *adapter, int address, int kind,
 		w83781d_write_value(data, W83781D_REG_I2C_SUBADDR,
 				(force_subclients[2] & 0x07) |
 				((force_subclients[3] & 0x07) << 4));
-		data->lm75[0]->addr = force_subclients[2];
+		sc_addr[0] = force_subclients[2];
 	} else {
 		val1 = w83781d_read_value(data, W83781D_REG_I2C_SUBADDR);
-		data->lm75[0]->addr = 0x48 + (val1 & 0x07);
+		sc_addr[0] = 0x48 + (val1 & 0x07);
 	}
 
 	if (kind != w83783s) {
-		data->lm75[1] = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
-		if (!(data->lm75[1])) {
-			err = -ENOMEM;
-			goto ERROR_SC_1;
-		}
-
 		if (force_subclients[0] == id &&
 		    force_subclients[1] == address) {
-			data->lm75[1]->addr = force_subclients[3];
+			sc_addr[1] = force_subclients[3];
 		} else {
-			data->lm75[1]->addr = 0x48 + ((val1 >> 4) & 0x07);
+			sc_addr[1] = 0x48 + ((val1 >> 4) & 0x07);
 		}
-		if (data->lm75[0]->addr == data->lm75[1]->addr) {
+		if (sc_addr[0] == sc_addr[1]) {
 			dev_err(&new_client->dev,
 			       "Duplicate addresses 0x%x for subclients.\n",
-			       data->lm75[0]->addr);
+			       sc_addr[0]);
 			err = -EBUSY;
 			goto ERROR_SC_2;
 		}
 	}
 
-	if (kind == w83781d)
-		client_name = "w83781d subclient";
-	else if (kind == w83782d)
-		client_name = "w83782d subclient";
-	else if (kind == w83783s)
-		client_name = "w83783s subclient";
-	else if (kind == as99127f)
-		client_name = "as99127f subclient";
-
 	for (i = 0; i <= 1; i++) {
-		/* store all data in w83781d */
-		i2c_set_clientdata(data->lm75[i], NULL);
-		data->lm75[i]->adapter = adapter;
-		data->lm75[i]->driver = &w83781d_driver;
-		data->lm75[i]->flags = 0;
-		strlcpy(data->lm75[i]->name, client_name,
-			I2C_NAME_SIZE);
-		if ((err = i2c_attach_client(data->lm75[i]))) {
+		data->lm75[i] = i2c_new_dummy(adapter, sc_addr[i]);
+		if (!data->lm75[i]) {
 			dev_err(&new_client->dev, "Subclient %d "
 				"registration at address 0x%x "
-				"failed.\n", i, data->lm75[i]->addr);
+				"failed.\n", i, sc_addr[i]);
+			err = -ENOMEM;
 			if (i == 1)
 				goto ERROR_SC_3;
 			goto ERROR_SC_2;
@@ -983,12 +878,9 @@ w83781d_detect_subclients(struct i2c_adapter *adapter, int address, int kind,
 
 /* Undo inits in case of errors */
 ERROR_SC_3:
-	i2c_detach_client(data->lm75[0]);
+	i2c_unregister_device(data->lm75[0]);
 ERROR_SC_2:
-	kfree(data->lm75[1]);
 ERROR_SC_1:
-	kfree(data->lm75[0]);
-ERROR_SC_0:
 	return err;
 }
 
@@ -1029,7 +921,7 @@ static struct attribute* w83781d_attributes[] = {
 	&dev_attr_vrm.attr,
 	&dev_attr_alarms.attr,
 	&dev_attr_beep_mask.attr,
-	&dev_attr_beep_enable.attr,
+	&sensor_dev_attr_beep_enable.dev_attr.attr,
 	NULL
 };
 static const struct attribute_group w83781d_group = {
@@ -1151,96 +1043,74 @@ w83781d_create_files(struct device *dev, int kind, int is_isa)
 		}
 	}
 
-	if (is_isa) {
-		err = device_create_file(&pdev->dev, &dev_attr_name);
-		if (err)
-			return err;
-	}
-
 	return 0;
 }
 
+/* Return 0 if detection is successful, -ENODEV otherwise */
 static int
-w83781d_detect(struct i2c_adapter *adapter, int address, int kind)
+w83781d_detect(struct i2c_client *client, int kind,
+	       struct i2c_board_info *info)
 {
 	int val1 = 0, val2;
-	struct i2c_client *client;
-	struct device *dev;
-	struct w83781d_data *data;
-	int err;
+	struct w83781d_data *isa = w83781d_data_if_isa();
+	struct i2c_adapter *adapter = client->adapter;
+	int address = client->addr;
 	const char *client_name = "";
 	enum vendor { winbond, asus } vendid;
 
-	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
-		err = -EINVAL;
-		goto ERROR1;
-	}
-
-	/* OK. For now, we presume we have a valid client. We now create the
-	   client structure, even though we cannot fill it completely yet.
-	   But it allows us to access w83781d_{read,write}_value. */
-
-	if (!(data = kzalloc(sizeof(struct w83781d_data), GFP_KERNEL))) {
-		err = -ENOMEM;
-		goto ERROR1;
-	}
-
-	client = &data->client;
-	i2c_set_clientdata(client, data);
-	client->addr = address;
-	mutex_init(&data->lock);
-	client->adapter = adapter;
-	client->driver = &w83781d_driver;
-	dev = &client->dev;
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -ENODEV;
 
-	/* Now, we do the remaining detection. */
+	/* We block updates of the ISA device to minimize the risk of
+	   concurrent access to the same W83781D chip through different
+	   interfaces. */
+	if (isa)
+		mutex_lock(&isa->update_lock);
 
 	/* The w8378?d may be stuck in some other bank than bank 0. This may
 	   make reading other information impossible. Specify a force=... or
 	   force_*=... parameter, and the Winbond will be reset to the right
 	   bank. */
 	if (kind < 0) {
-		if (w83781d_read_value(data, W83781D_REG_CONFIG) & 0x80) {
+		if (i2c_smbus_read_byte_data
+		    (client, W83781D_REG_CONFIG) & 0x80) {
 			dev_dbg(&adapter->dev, "Detection of w83781d chip "
 				"failed at step 3\n");
-			err = -ENODEV;
-			goto ERROR2;
+			goto err_nodev;
 		}
-		val1 = w83781d_read_value(data, W83781D_REG_BANK);
-		val2 = w83781d_read_value(data, W83781D_REG_CHIPMAN);
+		val1 = i2c_smbus_read_byte_data(client, W83781D_REG_BANK);
+		val2 = i2c_smbus_read_byte_data(client, W83781D_REG_CHIPMAN);
 		/* Check for Winbond or Asus ID if in bank 0 */
 		if ((!(val1 & 0x07)) &&
 		    (((!(val1 & 0x80)) && (val2 != 0xa3) && (val2 != 0xc3))
 		     || ((val1 & 0x80) && (val2 != 0x5c) && (val2 != 0x12)))) {
 			dev_dbg(&adapter->dev, "Detection of w83781d chip "
 				"failed at step 4\n");
-			err = -ENODEV;
-			goto ERROR2;
+			goto err_nodev;
 		}
 		/* If Winbond SMBus, check address at 0x48.
 		   Asus doesn't support, except for as99127f rev.2 */
 		if ((!(val1 & 0x80) && (val2 == 0xa3)) ||
 		    ((val1 & 0x80) && (val2 == 0x5c))) {
-			if (w83781d_read_value
-			    (data, W83781D_REG_I2C_ADDR) != address) {
+			if (i2c_smbus_read_byte_data
+			    (client, W83781D_REG_I2C_ADDR) != address) {
 				dev_dbg(&adapter->dev, "Detection of w83781d "
 					"chip failed at step 5\n");
-				err = -ENODEV;
-				goto ERROR2;
+				goto err_nodev;
 			}
 		}
 	}
 
 	/* We have either had a force parameter, or we have already detected the
 	   Winbond. Put it now into bank 0 and Vendor ID High Byte */
-	w83781d_write_value(data, W83781D_REG_BANK,
-			    (w83781d_read_value(data, W83781D_REG_BANK)
-			     & 0x78) | 0x80);
+	i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
+		(i2c_smbus_read_byte_data(client, W83781D_REG_BANK)
+		 & 0x78) | 0x80);
 
 	/* Determine the chip type. */
 	if (kind <= 0) {
 		/* get vendor ID */
-		val2 = w83781d_read_value(data, W83781D_REG_CHIPMAN);
+		val2 = i2c_smbus_read_byte_data(client, W83781D_REG_CHIPMAN);
 		if (val2 == 0x5c)
 			vendid = winbond;
 		else if (val2 == 0x12)
@@ -1248,11 +1118,10 @@ w83781d_detect(struct i2c_adapter *adapter, int address, int kind)
 		else {
 			dev_dbg(&adapter->dev, "w83781d chip vendor is "
 				"neither Winbond nor Asus\n");
-			err = -ENODEV;
-			goto ERROR2;
+			goto err_nodev;
 		}
 
-		val1 = w83781d_read_value(data, W83781D_REG_WCHIPID);
+		val1 = i2c_smbus_read_byte_data(client, W83781D_REG_WCHIPID);
 		if ((val1 == 0x10 || val1 == 0x11) && vendid == winbond)
 			kind = w83781d;
 		else if (val1 == 0x30 && vendid == winbond)
@@ -1266,11 +1135,20 @@ w83781d_detect(struct i2c_adapter *adapter, int address, int kind)
 				dev_warn(&adapter->dev, "Ignoring 'force' "
 					 "parameter for unknown chip at "
 					 "address 0x%02x\n", address);
-			err = -EINVAL;
-			goto ERROR2;
+			goto err_nodev;
+		}
+
+		if ((kind == w83781d || kind == w83782d)
+		 && w83781d_alias_detect(client, val1)) {
+			dev_dbg(&adapter->dev, "Device at 0x%02x appears to "
+				"be the same as ISA device\n", address);
+			goto err_nodev;
 		}
 	}
 
+	if (isa)
+		mutex_unlock(&isa->update_lock);
+
 	if (kind == w83781d) {
 		client_name = "w83781d";
 	} else if (kind == w83782d) {
@@ -1281,24 +1159,46 @@ w83781d_detect(struct i2c_adapter *adapter, int address, int kind)
 		client_name = "as99127f";
 	}
 
-	/* Fill in the remaining client fields and put into the global list */
-	strlcpy(client->name, client_name, I2C_NAME_SIZE);
-	data->type = kind;
+	strlcpy(info->type, client_name, I2C_NAME_SIZE);
+
+	return 0;
+
+ err_nodev:
+	if (isa)
+		mutex_unlock(&isa->update_lock);
+	return -ENODEV;
+}
+
+static int
+w83781d_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct w83781d_data *data;
+	int err;
+
+	data = kzalloc(sizeof(struct w83781d_data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto ERROR1;
+	}
+
+	i2c_set_clientdata(client, data);
+	mutex_init(&data->lock);
+	mutex_init(&data->update_lock);
 
-	/* Tell the I2C layer a new client has arrived */
-	if ((err = i2c_attach_client(client)))
-		goto ERROR2;
+	data->type = id->driver_data;
+	data->client = client;
 
 	/* attach secondary i2c lm75-like clients */
-	if ((err = w83781d_detect_subclients(adapter, address,
-			kind, client)))
+	err = w83781d_detect_subclients(client);
+	if (err)
 		goto ERROR3;
 
 	/* Initialize the chip */
 	w83781d_init_device(dev);
 
 	/* Register sysfs hooks */
-	err = w83781d_create_files(dev, kind, 0);
+	err = w83781d_create_files(dev, data->type, 0);
 	if (err)
 		goto ERROR4;
 
@@ -1314,264 +1214,113 @@ ERROR4:
 	sysfs_remove_group(&dev->kobj, &w83781d_group);
 	sysfs_remove_group(&dev->kobj, &w83781d_group_opt);
 
-	if (data->lm75[1]) {
-		i2c_detach_client(data->lm75[1]);
-		kfree(data->lm75[1]);
-	}
-	if (data->lm75[0]) {
-		i2c_detach_client(data->lm75[0]);
-		kfree(data->lm75[0]);
-	}
+	if (data->lm75[0])
+		i2c_unregister_device(data->lm75[0]);
+	if (data->lm75[1])
+		i2c_unregister_device(data->lm75[1]);
 ERROR3:
-	i2c_detach_client(client);
-ERROR2:
+	i2c_set_clientdata(client, NULL);
 	kfree(data);
 ERROR1:
 	return err;
 }
 
 static int
-w83781d_detach_client(struct i2c_client *client)
+w83781d_remove(struct i2c_client *client)
 {
 	struct w83781d_data *data = i2c_get_clientdata(client);
-	int err;
-
-	/* main client */
-	if (data) {
-		hwmon_device_unregister(data->hwmon_dev);
-		sysfs_remove_group(&client->dev.kobj, &w83781d_group);
-		sysfs_remove_group(&client->dev.kobj, &w83781d_group_opt);
-	}
-
-	if ((err = i2c_detach_client(client)))
-		return err;
+	struct device *dev = &client->dev;
 
-	/* main client */
-	if (data)
-		kfree(data);
-
-	/* subclient */
-	else
-		kfree(client);
-
-	return 0;
-}
-
-static int __devinit
-w83781d_isa_probe(struct platform_device *pdev)
-{
-	int err, reg;
-	struct w83781d_data *data;
-	struct resource *res;
-	const char *name;
-
-	/* Reserve the ISA region */
-	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
-	if (!request_region(res->start + W83781D_ADDR_REG_OFFSET, 2,
-			    "w83781d")) {
-		err = -EBUSY;
-		goto exit;
-	}
-
-	if (!(data = kzalloc(sizeof(struct w83781d_data), GFP_KERNEL))) {
-		err = -ENOMEM;
-		goto exit_release_region;
-	}
-	mutex_init(&data->lock);
-	data->client.addr = res->start;
-	i2c_set_clientdata(&data->client, data);
-	platform_set_drvdata(pdev, data);
-
-	reg = w83781d_read_value(data, W83781D_REG_WCHIPID);
-	switch (reg) {
-	case 0x30:
-		data->type = w83782d;
-		name = "w83782d";
-		break;
-	default:
-		data->type = w83781d;
-		name = "w83781d";
-	}
-	strlcpy(data->client.name, name, I2C_NAME_SIZE);
-
-	/* Initialize the W83781D chip */
-	w83781d_init_device(&pdev->dev);
-
-	/* Register sysfs hooks */
-	err = w83781d_create_files(&pdev->dev, data->type, 1);
-	if (err)
-		goto exit_remove_files;
-
-	data->hwmon_dev = hwmon_device_register(&pdev->dev);
-	if (IS_ERR(data->hwmon_dev)) {
-		err = PTR_ERR(data->hwmon_dev);
-		goto exit_remove_files;
-	}
-
-	return 0;
+	hwmon_device_unregister(data->hwmon_dev);
 
- exit_remove_files:
-	sysfs_remove_group(&pdev->dev.kobj, &w83781d_group);
-	sysfs_remove_group(&pdev->dev.kobj, &w83781d_group_opt);
-	device_remove_file(&pdev->dev, &dev_attr_name);
-	kfree(data);
- exit_release_region:
-	release_region(res->start + W83781D_ADDR_REG_OFFSET, 2);
- exit:
-	return err;
-}
+	sysfs_remove_group(&dev->kobj, &w83781d_group);
+	sysfs_remove_group(&dev->kobj, &w83781d_group_opt);
 
-static int __devexit
-w83781d_isa_remove(struct platform_device *pdev)
-{
-	struct w83781d_data *data = platform_get_drvdata(pdev);
+	if (data->lm75[0])
+		i2c_unregister_device(data->lm75[0]);
+	if (data->lm75[1])
+		i2c_unregister_device(data->lm75[1]);
 
-	hwmon_device_unregister(data->hwmon_dev);
-	sysfs_remove_group(&pdev->dev.kobj, &w83781d_group);
-	sysfs_remove_group(&pdev->dev.kobj, &w83781d_group_opt);
-	device_remove_file(&pdev->dev, &dev_attr_name);
-	release_region(data->client.addr + W83781D_ADDR_REG_OFFSET, 2);
+	i2c_set_clientdata(client, NULL);
 	kfree(data);
 
 	return 0;
 }
 
-/* The SMBus locks itself, usually, but nothing may access the Winbond between
-   bank switches. ISA access must always be locked explicitly!
-   We ignore the W83781D BUSY flag at this moment - it could lead to deadlocks,
-   would slow down the W83781D access and should not be necessary.
-   There are some ugly typecasts here, but the good news is - they should
-   nowhere else be necessary! */
 static int
-w83781d_read_value(struct w83781d_data *data, u16 reg)
+w83781d_read_value_i2c(struct w83781d_data *data, u16 reg)
 {
-	struct i2c_client *client = &data->client;
-	int res, word_sized, bank;
+	struct i2c_client *client = data->client;
+	int res, bank;
 	struct i2c_client *cl;
 
-	mutex_lock(&data->lock);
-	if (!client->driver) { /* ISA device */
-		word_sized = (((reg & 0xff00) == 0x100)
-			      || ((reg & 0xff00) == 0x200))
-		    && (((reg & 0x00ff) == 0x50)
-			|| ((reg & 0x00ff) == 0x53)
-			|| ((reg & 0x00ff) == 0x55));
-		if (reg & 0xff00) {
-			outb_p(W83781D_REG_BANK,
-			       client->addr + W83781D_ADDR_REG_OFFSET);
-			outb_p(reg >> 8,
-			       client->addr + W83781D_DATA_REG_OFFSET);
-		}
-		outb_p(reg & 0xff, client->addr + W83781D_ADDR_REG_OFFSET);
-		res = inb_p(client->addr + W83781D_DATA_REG_OFFSET);
-		if (word_sized) {
-			outb_p((reg & 0xff) + 1,
-			       client->addr + W83781D_ADDR_REG_OFFSET);
-			res =
-			    (res << 8) + inb_p(client->addr +
-					       W83781D_DATA_REG_OFFSET);
-		}
-		if (reg & 0xff00) {
-			outb_p(W83781D_REG_BANK,
-			       client->addr + W83781D_ADDR_REG_OFFSET);
-			outb_p(0, client->addr + W83781D_DATA_REG_OFFSET);
-		}
+	bank = (reg >> 8) & 0x0f;
+	if (bank > 2)
+		/* switch banks */
+		i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
+					  bank);
+	if (bank == 0 || bank > 2) {
+		res = i2c_smbus_read_byte_data(client, reg & 0xff);
 	} else {
-		bank = (reg >> 8) & 0x0f;
-		if (bank > 2)
-			/* switch banks */
-			i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
-						  bank);
-		if (bank == 0 || bank > 2) {
-			res = i2c_smbus_read_byte_data(client, reg & 0xff);
-		} else {
-			/* switch to subclient */
-			cl = data->lm75[bank - 1];
-			/* convert from ISA to LM75 I2C addresses */
-			switch (reg & 0xff) {
-			case 0x50:	/* TEMP */
-				res = swab16(i2c_smbus_read_word_data(cl, 0));
-				break;
-			case 0x52:	/* CONFIG */
-				res = i2c_smbus_read_byte_data(cl, 1);
-				break;
-			case 0x53:	/* HYST */
-				res = swab16(i2c_smbus_read_word_data(cl, 2));
-				break;
-			case 0x55:	/* OVER */
-			default:
-				res = swab16(i2c_smbus_read_word_data(cl, 3));
-				break;
-			}
+		/* switch to subclient */
+		cl = data->lm75[bank - 1];
+		/* convert from ISA to LM75 I2C addresses */
+		switch (reg & 0xff) {
+		case 0x50:	/* TEMP */
+			res = swab16(i2c_smbus_read_word_data(cl, 0));
+			break;
+		case 0x52:	/* CONFIG */
+			res = i2c_smbus_read_byte_data(cl, 1);
+			break;
+		case 0x53:	/* HYST */
+			res = swab16(i2c_smbus_read_word_data(cl, 2));
+			break;
+		case 0x55:	/* OVER */
+		default:
+			res = swab16(i2c_smbus_read_word_data(cl, 3));
+			break;
 		}
-		if (bank > 2)
-			i2c_smbus_write_byte_data(client, W83781D_REG_BANK, 0);
 	}
-	mutex_unlock(&data->lock);
+	if (bank > 2)
+		i2c_smbus_write_byte_data(client, W83781D_REG_BANK, 0);
+
 	return res;
 }
 
 static int
-w83781d_write_value(struct w83781d_data *data, u16 reg, u16 value)
+w83781d_write_value_i2c(struct w83781d_data *data, u16 reg, u16 value)
 {
-	struct i2c_client *client = &data->client;
-	int word_sized, bank;
+	struct i2c_client *client = data->client;
+	int bank;
 	struct i2c_client *cl;
 
-	mutex_lock(&data->lock);
-	if (!client->driver) { /* ISA device */
-		word_sized = (((reg & 0xff00) == 0x100)
-			      || ((reg & 0xff00) == 0x200))
-		    && (((reg & 0x00ff) == 0x53)
-			|| ((reg & 0x00ff) == 0x55));
-		if (reg & 0xff00) {
-			outb_p(W83781D_REG_BANK,
-			       client->addr + W83781D_ADDR_REG_OFFSET);
-			outb_p(reg >> 8,
-			       client->addr + W83781D_DATA_REG_OFFSET);
-		}
-		outb_p(reg & 0xff, client->addr + W83781D_ADDR_REG_OFFSET);
-		if (word_sized) {
-			outb_p(value >> 8,
-			       client->addr + W83781D_DATA_REG_OFFSET);
-			outb_p((reg & 0xff) + 1,
-			       client->addr + W83781D_ADDR_REG_OFFSET);
-		}
-		outb_p(value & 0xff, client->addr + W83781D_DATA_REG_OFFSET);
-		if (reg & 0xff00) {
-			outb_p(W83781D_REG_BANK,
-			       client->addr + W83781D_ADDR_REG_OFFSET);
-			outb_p(0, client->addr + W83781D_DATA_REG_OFFSET);
-		}
+	bank = (reg >> 8) & 0x0f;
+	if (bank > 2)
+		/* switch banks */
+		i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
+					  bank);
+	if (bank == 0 || bank > 2) {
+		i2c_smbus_write_byte_data(client, reg & 0xff,
+					  value & 0xff);
 	} else {
-		bank = (reg >> 8) & 0x0f;
-		if (bank > 2)
-			/* switch banks */
-			i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
-						  bank);
-		if (bank == 0 || bank > 2) {
-			i2c_smbus_write_byte_data(client, reg & 0xff,
-						  value & 0xff);
-		} else {
-			/* switch to subclient */
-			cl = data->lm75[bank - 1];
-			/* convert from ISA to LM75 I2C addresses */
-			switch (reg & 0xff) {
-			case 0x52:	/* CONFIG */
-				i2c_smbus_write_byte_data(cl, 1, value & 0xff);
-				break;
-			case 0x53:	/* HYST */
-				i2c_smbus_write_word_data(cl, 2, swab16(value));
-				break;
-			case 0x55:	/* OVER */
-				i2c_smbus_write_word_data(cl, 3, swab16(value));
-				break;
-			}
+		/* switch to subclient */
+		cl = data->lm75[bank - 1];
+		/* convert from ISA to LM75 I2C addresses */
+		switch (reg & 0xff) {
+		case 0x52:	/* CONFIG */
+			i2c_smbus_write_byte_data(cl, 1, value & 0xff);
+			break;
+		case 0x53:	/* HYST */
+			i2c_smbus_write_word_data(cl, 2, swab16(value));
+			break;
+		case 0x55:	/* OVER */
+			i2c_smbus_write_word_data(cl, 3, swab16(value));
+			break;
 		}
-		if (bank > 2)
-			i2c_smbus_write_byte_data(client, W83781D_REG_BANK, 0);
 	}
-	mutex_unlock(&data->lock);
+	if (bank > 2)
+		i2c_smbus_write_byte_data(client, W83781D_REG_BANK, 0);
+
 	return 0;
 }
 
@@ -1678,7 +1427,7 @@ w83781d_init_device(struct device *dev)
 static struct w83781d_data *w83781d_update_device(struct device *dev)
 {
 	struct w83781d_data *data = dev_get_drvdata(dev);
-	struct i2c_client *client = &data->client;
+	struct i2c_client *client = data->client;
 	int i;
 
 	mutex_lock(&data->update_lock);
@@ -1775,8 +1524,7 @@ static struct w83781d_data *w83781d_update_device(struct device *dev)
 						W83781D_REG_ALARM2) << 8);
 		}
 		i = w83781d_read_value(data, W83781D_REG_BEEP_INTS2);
-		data->beep_enable = i >> 7;
-		data->beep_mask = ((i & 0x7f) << 8) +
+		data->beep_mask = (i << 8) +
 		    w83781d_read_value(data, W83781D_REG_BEEP_INTS1);
 		if ((data->type != w83781d) && (data->type != as99127f)) {
 			data->beep_mask |=
@@ -1792,6 +1540,275 @@ static struct w83781d_data *w83781d_update_device(struct device *dev)
 	return data;
 }
 
+static const struct i2c_device_id w83781d_ids[] = {
+	{ "w83781d", w83781d, },
+	{ "w83782d", w83782d, },
+	{ "w83783s", w83783s, },
+	{ "as99127f", as99127f },
+	{ /* LIST END */ }
+};
+MODULE_DEVICE_TABLE(i2c, w83781d_ids);
+
+static struct i2c_driver w83781d_driver = {
+	.class		= I2C_CLASS_HWMON,
+	.driver = {
+		.name = "w83781d",
+	},
+	.probe		= w83781d_probe,
+	.remove		= w83781d_remove,
+	.id_table	= w83781d_ids,
+	.detect		= w83781d_detect,
+	.address_data	= &addr_data,
+};
+
+/*
+ * ISA related code
+ */
+#ifdef CONFIG_ISA
+
+/* ISA device, if found */
+static struct platform_device *pdev;
+
+static unsigned short isa_address = 0x290;
+
+/* I2C devices get this name attribute automatically, but for ISA devices
+   we must create it by ourselves. */
+static ssize_t
+show_name(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+	struct w83781d_data *data = dev_get_drvdata(dev);
+	return sprintf(buf, "%s\n", data->name);
+}
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+
+static struct w83781d_data *w83781d_data_if_isa(void)
+{
+	return pdev ? platform_get_drvdata(pdev) : NULL;
+}
+
+/* Returns 1 if the I2C chip appears to be an alias of the ISA chip */
+static int w83781d_alias_detect(struct i2c_client *client, u8 chipid)
+{
+	struct w83781d_data *isa;
+	int i;
+
+	if (!pdev)	/* No ISA chip */
+		return 0;
+
+	isa = platform_get_drvdata(pdev);
+
+	if (w83781d_read_value(isa, W83781D_REG_I2C_ADDR) != client->addr)
+		return 0;	/* Address doesn't match */
+	if (w83781d_read_value(isa, W83781D_REG_WCHIPID) != chipid)
+		return 0;	/* Chip type doesn't match */
+
+	/* We compare all the limit registers, the config register and the
+	 * interrupt mask registers */
+	for (i = 0x2b; i <= 0x3d; i++) {
+		if (w83781d_read_value(isa, i) !=
+		    i2c_smbus_read_byte_data(client, i))
+			return 0;
+	}
+	if (w83781d_read_value(isa, W83781D_REG_CONFIG) !=
+	    i2c_smbus_read_byte_data(client, W83781D_REG_CONFIG))
+		return 0;
+	for (i = 0x43; i <= 0x46; i++) {
+		if (w83781d_read_value(isa, i) !=
+		    i2c_smbus_read_byte_data(client, i))
+			return 0;
+	}
+
+	return 1;
+}
+
+static int
+w83781d_read_value_isa(struct w83781d_data *data, u16 reg)
+{
+	int word_sized, res;
+
+	word_sized = (((reg & 0xff00) == 0x100)
+		      || ((reg & 0xff00) == 0x200))
+	    && (((reg & 0x00ff) == 0x50)
+		|| ((reg & 0x00ff) == 0x53)
+		|| ((reg & 0x00ff) == 0x55));
+	if (reg & 0xff00) {
+		outb_p(W83781D_REG_BANK,
+		       data->isa_addr + W83781D_ADDR_REG_OFFSET);
+		outb_p(reg >> 8,
+		       data->isa_addr + W83781D_DATA_REG_OFFSET);
+	}
+	outb_p(reg & 0xff, data->isa_addr + W83781D_ADDR_REG_OFFSET);
+	res = inb_p(data->isa_addr + W83781D_DATA_REG_OFFSET);
+	if (word_sized) {
+		outb_p((reg & 0xff) + 1,
+		       data->isa_addr + W83781D_ADDR_REG_OFFSET);
+		res =
+		    (res << 8) + inb_p(data->isa_addr +
+				       W83781D_DATA_REG_OFFSET);
+	}
+	if (reg & 0xff00) {
+		outb_p(W83781D_REG_BANK,
+		       data->isa_addr + W83781D_ADDR_REG_OFFSET);
+		outb_p(0, data->isa_addr + W83781D_DATA_REG_OFFSET);
+	}
+	return res;
+}
+
+static void
+w83781d_write_value_isa(struct w83781d_data *data, u16 reg, u16 value)
+{
+	int word_sized;
+
+	word_sized = (((reg & 0xff00) == 0x100)
+		      || ((reg & 0xff00) == 0x200))
+	    && (((reg & 0x00ff) == 0x53)
+		|| ((reg & 0x00ff) == 0x55));
+	if (reg & 0xff00) {
+		outb_p(W83781D_REG_BANK,
+		       data->isa_addr + W83781D_ADDR_REG_OFFSET);
+		outb_p(reg >> 8,
+		       data->isa_addr + W83781D_DATA_REG_OFFSET);
+	}
+	outb_p(reg & 0xff, data->isa_addr + W83781D_ADDR_REG_OFFSET);
+	if (word_sized) {
+		outb_p(value >> 8,
+		       data->isa_addr + W83781D_DATA_REG_OFFSET);
+		outb_p((reg & 0xff) + 1,
+		       data->isa_addr + W83781D_ADDR_REG_OFFSET);
+	}
+	outb_p(value & 0xff, data->isa_addr + W83781D_DATA_REG_OFFSET);
+	if (reg & 0xff00) {
+		outb_p(W83781D_REG_BANK,
+		       data->isa_addr + W83781D_ADDR_REG_OFFSET);
+		outb_p(0, data->isa_addr + W83781D_DATA_REG_OFFSET);
+	}
+}
+
+/* The SMBus locks itself, usually, but nothing may access the Winbond between
+   bank switches. ISA access must always be locked explicitly!
+   We ignore the W83781D BUSY flag at this moment - it could lead to deadlocks,
+   would slow down the W83781D access and should not be necessary.
+   There are some ugly typecasts here, but the good news is - they should
+   nowhere else be necessary! */
+static int
+w83781d_read_value(struct w83781d_data *data, u16 reg)
+{
+	struct i2c_client *client = data->client;
+	int res;
+
+	mutex_lock(&data->lock);
+	if (client)
+		res = w83781d_read_value_i2c(data, reg);
+	else
+		res = w83781d_read_value_isa(data, reg);
+	mutex_unlock(&data->lock);
+	return res;
+}
+
+static int
+w83781d_write_value(struct w83781d_data *data, u16 reg, u16 value)
+{
+	struct i2c_client *client = data->client;
+
+	mutex_lock(&data->lock);
+	if (client)
+		w83781d_write_value_i2c(data, reg, value);
+	else
+		w83781d_write_value_isa(data, reg, value);
+	mutex_unlock(&data->lock);
+	return 0;
+}
+
+static int __devinit
+w83781d_isa_probe(struct platform_device *pdev)
+{
+	int err, reg;
+	struct w83781d_data *data;
+	struct resource *res;
+
+	/* Reserve the ISA region */
+	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	if (!request_region(res->start + W83781D_ADDR_REG_OFFSET, 2,
+			    "w83781d")) {
+		err = -EBUSY;
+		goto exit;
+	}
+
+	data = kzalloc(sizeof(struct w83781d_data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto exit_release_region;
+	}
+	mutex_init(&data->lock);
+	data->isa_addr = res->start;
+	platform_set_drvdata(pdev, data);
+
+	reg = w83781d_read_value(data, W83781D_REG_WCHIPID);
+	switch (reg) {
+	case 0x30:
+		data->type = w83782d;
+		data->name = "w83782d";
+		break;
+	default:
+		data->type = w83781d;
+		data->name = "w83781d";
+	}
+
+	/* Initialize the W83781D chip */
+	w83781d_init_device(&pdev->dev);
+
+	/* Register sysfs hooks */
+	err = w83781d_create_files(&pdev->dev, data->type, 1);
+	if (err)
+		goto exit_remove_files;
+
+	err = device_create_file(&pdev->dev, &dev_attr_name);
+	if (err)
+		goto exit_remove_files;
+
+	data->hwmon_dev = hwmon_device_register(&pdev->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		err = PTR_ERR(data->hwmon_dev);
+		goto exit_remove_files;
+	}
+
+	return 0;
+
+ exit_remove_files:
+	sysfs_remove_group(&pdev->dev.kobj, &w83781d_group);
+	sysfs_remove_group(&pdev->dev.kobj, &w83781d_group_opt);
+	device_remove_file(&pdev->dev, &dev_attr_name);
+	kfree(data);
+ exit_release_region:
+	release_region(res->start + W83781D_ADDR_REG_OFFSET, 2);
+ exit:
+	return err;
+}
+
+static int __devexit
+w83781d_isa_remove(struct platform_device *pdev)
+{
+	struct w83781d_data *data = platform_get_drvdata(pdev);
+
+	hwmon_device_unregister(data->hwmon_dev);
+	sysfs_remove_group(&pdev->dev.kobj, &w83781d_group);
+	sysfs_remove_group(&pdev->dev.kobj, &w83781d_group_opt);
+	device_remove_file(&pdev->dev, &dev_attr_name);
+	release_region(data->isa_addr + W83781D_ADDR_REG_OFFSET, 2);
+	kfree(data);
+
+	return 0;
+}
+
+static struct platform_driver w83781d_isa_driver = {
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = "w83781d",
+	},
+	.probe = w83781d_isa_probe,
+	.remove = __devexit_p(w83781d_isa_remove),
+};
+
 /* return 1 if a supported chip is found, 0 otherwise */
 static int __init
 w83781d_isa_found(unsigned short address)
@@ -1928,18 +1945,14 @@ w83781d_isa_device_add(unsigned short address)
 }
 
 static int __init
-sensors_w83781d_init(void)
+w83781d_isa_register(void)
 {
 	int res;
 
-	res = i2c_add_driver(&w83781d_driver);
-	if (res)
-		goto exit;
-
 	if (w83781d_isa_found(isa_address)) {
 		res = platform_driver_register(&w83781d_isa_driver);
 		if (res)
-			goto exit_unreg_i2c_driver;
+			goto exit;
 
 		/* Sets global pdev as a side effect */
 		res = w83781d_isa_device_add(isa_address);
@@ -1949,21 +1962,94 @@ sensors_w83781d_init(void)
 
 	return 0;
 
- exit_unreg_isa_driver:
+exit_unreg_isa_driver:
 	platform_driver_unregister(&w83781d_isa_driver);
- exit_unreg_i2c_driver:
-	i2c_del_driver(&w83781d_driver);
- exit:
+exit:
 	return res;
 }
 
 static void __exit
-sensors_w83781d_exit(void)
+w83781d_isa_unregister(void)
 {
 	if (pdev) {
 		platform_device_unregister(pdev);
 		platform_driver_unregister(&w83781d_isa_driver);
 	}
+}
+#else /* !CONFIG_ISA */
+
+static struct w83781d_data *w83781d_data_if_isa(void)
+{
+	return NULL;
+}
+
+static int
+w83781d_alias_detect(struct i2c_client *client, u8 chipid)
+{
+	return 0;
+}
+
+static int
+w83781d_read_value(struct w83781d_data *data, u16 reg)
+{
+	int res;
+
+	mutex_lock(&data->lock);
+	res = w83781d_read_value_i2c(data, reg);
+	mutex_unlock(&data->lock);
+
+	return res;
+}
+
+static int
+w83781d_write_value(struct w83781d_data *data, u16 reg, u16 value)
+{
+	mutex_lock(&data->lock);
+	w83781d_write_value_i2c(data, reg, value);
+	mutex_unlock(&data->lock);
+
+	return 0;
+}
+
+static int __init
+w83781d_isa_register(void)
+{
+	return 0;
+}
+
+static void __exit
+w83781d_isa_unregister(void)
+{
+}
+#endif /* CONFIG_ISA */
+
+static int __init
+sensors_w83781d_init(void)
+{
+	int res;
+
+	/* We register the ISA device first, so that we can skip the
+	 * registration of an I2C interface to the same device. */
+	res = w83781d_isa_register();
+	if (res)
+		goto exit;
+
+	res = i2c_add_driver(&w83781d_driver);
+	if (res)
+		goto exit_unreg_isa;
+
+	return 0;
+
+ exit_unreg_isa:
+	w83781d_isa_unregister();
+ exit:
+	return res;
+}
+
+static void __exit
+sensors_w83781d_exit(void)
+{
+	w83781d_isa_unregister();
 	i2c_del_driver(&w83781d_driver);
 }
 
diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c
index de21142..5768def 100644
--- a/drivers/hwmon/w83791d.c
+++ b/drivers/hwmon/w83791d.c
@@ -23,7 +23,7 @@
     Supports following chips:
 
     Chip	#vin	#fanin	#pwm	#temp	wchipid	vendid	i2c	ISA
-    w83791d	10	5	3	3	0x71	0x5ca3	yes	no
+    w83791d	10	5	5	3	0x71	0x5ca3	yes	no
 
     The w83791d chip appears to be part way between the 83781d and the
     83792d. Thus, this file is derived from both the w83792d.c and
@@ -45,6 +45,7 @@
 #define NUMBER_OF_VIN		10
 #define NUMBER_OF_FANIN		5
 #define NUMBER_OF_TEMPIN	3
+#define NUMBER_OF_PWM		5
 
 /* Addresses to scan */
 static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f,
@@ -116,6 +117,25 @@ static const u8 W83791D_REG_FAN_MIN[NUMBER_OF_FANIN] = {
 	0xBD,			/* FAN 5 Count Low Limit in DataSheet */
 };
 
+static const u8 W83791D_REG_PWM[NUMBER_OF_PWM] = {
+	0x81,			/* PWM 1 duty cycle register in DataSheet */
+	0x83,			/* PWM 2 duty cycle register in DataSheet */
+	0x94,			/* PWM 3 duty cycle register in DataSheet */
+	0xA0,			/* PWM 4 duty cycle register in DataSheet */
+	0xA1,			/* PWM 5 duty cycle register in DataSheet */
+};
+
+static const u8 W83791D_REG_TEMP_TARGET[3] = {
+	0x85,			/* PWM 1 target temperature for temp 1 */
+	0x86,			/* PWM 2 target temperature for temp 2 */
+	0x96,			/* PWM 3 target temperature for temp 3 */
+};
+
+static const u8 W83791D_REG_TEMP_TOL[2] = {
+	0x87,			/* PWM 1/2 temperature tolerance */
+	0x97,			/* PWM 3 temperature tolerance */
+};
+
 static const u8 W83791D_REG_FAN_CFG[2] = {
 	0x84,			/* FAN 1/2 configuration */
 	0x95,			/* FAN 3 configuration */
@@ -160,6 +180,7 @@ static const u8 W83791D_REG_BEEP_CTRL[3] = {
 	0xA3,			/* BEEP Control Register 3 */
 };
 
+#define W83791D_REG_GPIO		0x15
 #define W83791D_REG_CONFIG		0x40
 #define W83791D_REG_VID_FANDIV		0x47
 #define W83791D_REG_DID_VID4		0x49
@@ -224,6 +245,15 @@ static u8 fan_to_reg(long rpm, int div)
 				 (val) < 0 ? ((val) - 250) / 500 * 128 : \
 				 ((val) + 250) / 500 * 128)
 
+/* for thermal cruise target temp, 7-bits, LSB = 1 degree Celsius */
+#define TARGET_TEMP_TO_REG(val)		((val) < 0 ? 0 : \
+					(val) >= 127000 ? 127 : \
+					((val) + 500) / 1000)
+
+/* for thermal cruise temp tolerance, 4-bits, LSB = 1 degree Celsius */
+#define TOL_TEMP_TO_REG(val)		((val) < 0 ? 0 : \
+					(val) >= 15000 ? 15 : \
+					((val) + 500) / 1000)
 
 #define BEEP_MASK_TO_REG(val)		((val) & 0xffffff)
 #define BEEP_MASK_FROM_REG(val)		((val) & 0xffffff)
@@ -275,6 +305,14 @@ struct w83791d_data {
 				   two sensors with three values
 				   (cur, over, hyst)  */
 
+	/* PWMs */
+	u8 pwm[5];		/* pwm duty cycle */
+	u8 pwm_enable[3];	/* pwm enable status for fan 1-3
+					(fan 4-5 only support manual mode) */
+
+	u8 temp_target[3];	/* pwm 1-3 target temperature */
+	u8 temp_tolerance[3];	/* pwm 1-3 temperature tolerance */
+
 	/* Misc */
 	u32 alarms;		/* realtime status register encoding,combined */
 	u8 beep_enable;		/* Global beep enable */
@@ -652,6 +690,217 @@ static struct sensor_device_attribute sda_fan_alarm[] = {
 	SENSOR_ATTR(fan5_alarm, S_IRUGO, show_alarm, NULL, 22),
 };
 
+/* read/write PWMs */
+static ssize_t show_pwm(struct device *dev, struct device_attribute *attr,
+				char *buf)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+	struct w83791d_data *data = w83791d_update_device(dev);
+	return sprintf(buf, "%u\n", data->pwm[nr]);
+}
+
+static ssize_t store_pwm(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83791d_data *data = i2c_get_clientdata(client);
+	int nr = sensor_attr->index;
+	unsigned long val;
+
+	if (strict_strtoul(buf, 10, &val))
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	data->pwm[nr] = SENSORS_LIMIT(val, 0, 255);
+	w83791d_write(client, W83791D_REG_PWM[nr], data->pwm[nr]);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static struct sensor_device_attribute sda_pwm[] = {
+	SENSOR_ATTR(pwm1, S_IWUSR | S_IRUGO,
+			show_pwm, store_pwm, 0),
+	SENSOR_ATTR(pwm2, S_IWUSR | S_IRUGO,
+			show_pwm, store_pwm, 1),
+	SENSOR_ATTR(pwm3, S_IWUSR | S_IRUGO,
+			show_pwm, store_pwm, 2),
+	SENSOR_ATTR(pwm4, S_IWUSR | S_IRUGO,
+			show_pwm, store_pwm, 3),
+	SENSOR_ATTR(pwm5, S_IWUSR | S_IRUGO,
+			show_pwm, store_pwm, 4),
+};
+
+static ssize_t show_pwmenable(struct device *dev, struct device_attribute *attr,
+				char *buf)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+	struct w83791d_data *data = w83791d_update_device(dev);
+	return sprintf(buf, "%u\n", data->pwm_enable[nr] + 1);
+}
+
+static ssize_t store_pwmenable(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83791d_data *data = i2c_get_clientdata(client);
+	int nr = sensor_attr->index;
+	unsigned long val;
+	u8 reg_cfg_tmp;
+	u8 reg_idx = 0;
+	u8 val_shift = 0;
+	u8 keep_mask = 0;
+
+	int ret = strict_strtoul(buf, 10, &val);
+
+	if (ret || val < 1 || val > 3)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	data->pwm_enable[nr] = val - 1;
+	switch (nr) {
+	case 0:
+		reg_idx = 0;
+		val_shift = 2;
+		keep_mask = 0xf3;
+		break;
+	case 1:
+		reg_idx = 0;
+		val_shift = 4;
+		keep_mask = 0xcf;
+		break;
+	case 2:
+		reg_idx = 1;
+		val_shift = 2;
+		keep_mask = 0xf3;
+		break;
+	}
+
+	reg_cfg_tmp = w83791d_read(client, W83791D_REG_FAN_CFG[reg_idx]);
+	reg_cfg_tmp = (reg_cfg_tmp & keep_mask) |
+					data->pwm_enable[nr] << val_shift;
+
+	w83791d_write(client, W83791D_REG_FAN_CFG[reg_idx], reg_cfg_tmp);
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+static struct sensor_device_attribute sda_pwmenable[] = {
+	SENSOR_ATTR(pwm1_enable, S_IWUSR | S_IRUGO,
+			show_pwmenable, store_pwmenable, 0),
+	SENSOR_ATTR(pwm2_enable, S_IWUSR | S_IRUGO,
+			show_pwmenable, store_pwmenable, 1),
+	SENSOR_ATTR(pwm3_enable, S_IWUSR | S_IRUGO,
+			show_pwmenable, store_pwmenable, 2),
+};
+
+/* For Smart Fan I / Thermal Cruise */
+static ssize_t show_temp_target(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	struct w83791d_data *data = w83791d_update_device(dev);
+	int nr = sensor_attr->index;
+	return sprintf(buf, "%d\n", TEMP1_FROM_REG(data->temp_target[nr]));
+}
+
+static ssize_t store_temp_target(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83791d_data *data = i2c_get_clientdata(client);
+	int nr = sensor_attr->index;
+	unsigned long val;
+	u8 target_mask;
+
+	if (strict_strtoul(buf, 10, &val))
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	data->temp_target[nr] = TARGET_TEMP_TO_REG(val);
+	target_mask = w83791d_read(client,
+				W83791D_REG_TEMP_TARGET[nr]) & 0x80;
+	w83791d_write(client, W83791D_REG_TEMP_TARGET[nr],
+				data->temp_target[nr] | target_mask);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static struct sensor_device_attribute sda_temp_target[] = {
+	SENSOR_ATTR(temp1_target, S_IWUSR | S_IRUGO,
+			show_temp_target, store_temp_target, 0),
+	SENSOR_ATTR(temp2_target, S_IWUSR | S_IRUGO,
+			show_temp_target, store_temp_target, 1),
+	SENSOR_ATTR(temp3_target, S_IWUSR | S_IRUGO,
+			show_temp_target, store_temp_target, 2),
+};
+
+static ssize_t show_temp_tolerance(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	struct w83791d_data *data = w83791d_update_device(dev);
+	int nr = sensor_attr->index;
+	return sprintf(buf, "%d\n", TEMP1_FROM_REG(data->temp_tolerance[nr]));
+}
+
+static ssize_t store_temp_tolerance(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83791d_data *data = i2c_get_clientdata(client);
+	int nr = sensor_attr->index;
+	unsigned long val;
+	u8 target_mask;
+	u8 reg_idx = 0;
+	u8 val_shift = 0;
+	u8 keep_mask = 0;
+
+	if (strict_strtoul(buf, 10, &val))
+		return -EINVAL;
+
+	switch (nr) {
+	case 0:
+		reg_idx = 0;
+		val_shift = 0;
+		keep_mask = 0xf0;
+		break;
+	case 1:
+		reg_idx = 0;
+		val_shift = 4;
+		keep_mask = 0x0f;
+		break;
+	case 2:
+		reg_idx = 1;
+		val_shift = 0;
+		keep_mask = 0xf0;
+		break;
+	}
+
+	mutex_lock(&data->update_lock);
+	data->temp_tolerance[nr] = TOL_TEMP_TO_REG(val);
+	target_mask = w83791d_read(client,
+			W83791D_REG_TEMP_TOL[reg_idx]) & keep_mask;
+	w83791d_write(client, W83791D_REG_TEMP_TOL[reg_idx],
+			(data->temp_tolerance[nr] << val_shift) | target_mask);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static struct sensor_device_attribute sda_temp_tolerance[] = {
+	SENSOR_ATTR(temp1_tolerance, S_IWUSR | S_IRUGO,
+			show_temp_tolerance, store_temp_tolerance, 0),
+	SENSOR_ATTR(temp2_tolerance, S_IWUSR | S_IRUGO,
+			show_temp_tolerance, store_temp_tolerance, 1),
+	SENSOR_ATTR(temp3_tolerance, S_IWUSR | S_IRUGO,
+			show_temp_tolerance, store_temp_tolerance, 2),
+};
+
 /* read/write the temperature1, includes measured value and limits */
 static ssize_t show_temp1(struct device *dev, struct device_attribute *devattr,
 				char *buf)
@@ -908,8 +1157,6 @@ static struct attribute *w83791d_attributes[] = {
 	FAN_UNIT_ATTRS(0),
 	FAN_UNIT_ATTRS(1),
 	FAN_UNIT_ATTRS(2),
-	FAN_UNIT_ATTRS(3),
-	FAN_UNIT_ATTRS(4),
 	TEMP_UNIT_ATTRS(0),
 	TEMP_UNIT_ATTRS(1),
 	TEMP_UNIT_ATTRS(2),
@@ -918,6 +1165,18 @@ static struct attribute *w83791d_attributes[] = {
 	&sda_beep_ctrl[1].dev_attr.attr,
 	&dev_attr_cpu0_vid.attr,
 	&dev_attr_vrm.attr,
+	&sda_pwm[0].dev_attr.attr,
+	&sda_pwm[1].dev_attr.attr,
+	&sda_pwm[2].dev_attr.attr,
+	&sda_pwmenable[0].dev_attr.attr,
+	&sda_pwmenable[1].dev_attr.attr,
+	&sda_pwmenable[2].dev_attr.attr,
+	&sda_temp_target[0].dev_attr.attr,
+	&sda_temp_target[1].dev_attr.attr,
+	&sda_temp_target[2].dev_attr.attr,
+	&sda_temp_tolerance[0].dev_attr.attr,
+	&sda_temp_tolerance[1].dev_attr.attr,
+	&sda_temp_tolerance[2].dev_attr.attr,
 	NULL
 };
 
@@ -925,6 +1184,20 @@ static const struct attribute_group w83791d_group = {
 	.attrs = w83791d_attributes,
 };
 
+/* Separate group of attributes for fan/pwm 4-5. Their pins can also be
+   in use for GPIO in which case their sysfs-interface should not be made
+   available */
+static struct attribute *w83791d_attributes_fanpwm45[] = {
+	FAN_UNIT_ATTRS(3),
+	FAN_UNIT_ATTRS(4),
+	&sda_pwm[3].dev_attr.attr,
+	&sda_pwm[4].dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group w83791d_group_fanpwm45 = {
+	.attrs = w83791d_attributes_fanpwm45,
+};
 
 static int w83791d_detect_subclients(struct i2c_client *client)
 {
@@ -1056,6 +1329,7 @@ static int w83791d_probe(struct i2c_client *client,
 	struct w83791d_data *data;
 	struct device *dev = &client->dev;
 	int i, err;
+	u8 has_fanpwm45;
 
 #ifdef DEBUG
 	int val1;
@@ -1090,15 +1364,27 @@ static int w83791d_probe(struct i2c_client *client,
 	if ((err = sysfs_create_group(&client->dev.kobj, &w83791d_group)))
 		goto error3;
 
+	/* Check if pins of fan/pwm 4-5 are in use as GPIO */
+	has_fanpwm45 = w83791d_read(client, W83791D_REG_GPIO) & 0x10;
+	if (has_fanpwm45) {
+		err = sysfs_create_group(&client->dev.kobj,
+					 &w83791d_group_fanpwm45);
+		if (err)
+			goto error4;
+	}
+
 	/* Everything is ready, now register the working device */
 	data->hwmon_dev = hwmon_device_register(dev);
 	if (IS_ERR(data->hwmon_dev)) {
 		err = PTR_ERR(data->hwmon_dev);
-		goto error4;
+		goto error5;
 	}
 
 	return 0;
 
+error5:
+	if (has_fanpwm45)
+		sysfs_remove_group(&client->dev.kobj, &w83791d_group_fanpwm45);
 error4:
 	sysfs_remove_group(&client->dev.kobj, &w83791d_group);
 error3:
@@ -1236,6 +1522,36 @@ static struct w83791d_data *w83791d_update_device(struct device *dev)
 		for (i = 0; i < 3; i++)
 			data->fan_div[i] |= (vbat_reg >> (3 + i)) & 0x04;
 
+		/* Update PWM duty cycle */
+		for (i = 0; i < NUMBER_OF_PWM; i++) {
+			data->pwm[i] =  w83791d_read(client,
+						W83791D_REG_PWM[i]);
+		}
+
+		/* Update PWM enable status */
+		for (i = 0; i < 2; i++) {
+			reg_array_tmp[i] = w83791d_read(client,
+						W83791D_REG_FAN_CFG[i]);
+		}
+		data->pwm_enable[0] = (reg_array_tmp[0] >> 2) & 0x03;
+		data->pwm_enable[1] = (reg_array_tmp[0] >> 4) & 0x03;
+		data->pwm_enable[2] = (reg_array_tmp[1] >> 2) & 0x03;
+
+		/* Update PWM target temperature */
+		for (i = 0; i < 3; i++) {
+			data->temp_target[i] = w83791d_read(client,
+				W83791D_REG_TEMP_TARGET[i]) & 0x7f;
+		}
+
+		/* Update PWM temperature tolerance */
+		for (i = 0; i < 2; i++) {
+			reg_array_tmp[i] = w83791d_read(client,
+					W83791D_REG_TEMP_TOL[i]);
+		}
+		data->temp_tolerance[0] = reg_array_tmp[0] & 0x0f;
+		data->temp_tolerance[1] = (reg_array_tmp[0] >> 4) & 0x0f;
+		data->temp_tolerance[2] = reg_array_tmp[1] & 0x0f;
+
 		/* Update the first temperature sensor */
 		for (i = 0; i < 3; i++) {
 			data->temp1[i] = w83791d_read(client,
diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c
index 0e7b1c6..60ca917 100644
--- a/drivers/i2c/busses/i2c-powermac.c
+++ b/drivers/i2c/busses/i2c-powermac.c
@@ -259,6 +259,35 @@ static int __devinit i2c_powermac_probe(struct platform_device *dev)
 	}
 
 	printk(KERN_INFO "PowerMac i2c bus %s registered\n", name);
+
+	if (!strncmp(basename, "uni-n", 5)) {
+		struct device_node *np;
+		const u32 *prop;
+		struct i2c_board_info info;
+
+		/* Instantiate I2C motion sensor if present */
+		np = of_find_node_by_name(NULL, "accelerometer");
+		if (np && of_device_is_compatible(np, "AAPL,accelerometer_1") &&
+		    (prop = of_get_property(np, "reg", NULL))) {
+			int i2c_bus;
+			const char *tmp_bus;
+
+			/* look for bus either using "reg" or by path */
+			tmp_bus = strstr(np->full_name, "/i2c-bus@");
+			if (tmp_bus)
+				i2c_bus = *(tmp_bus + 9) - '0';
+			else
+				i2c_bus = ((*prop) >> 8) & 0x0f;
+
+			if (pmac_i2c_get_channel(bus) == i2c_bus) {
+				memset(&info, 0, sizeof(struct i2c_board_info));
+				info.addr = ((*prop) & 0xff) >> 1;
+				strlcpy(info.type, "ams", I2C_NAME_SIZE);
+				i2c_new_device(adapter, &info);
+			}
+		}
+	}
+
 	return rc;
 }