summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorLi Yang <leoli@freescale.com>2007-05-11 17:09:55 +0800
committerGreg Kroah-Hartman <gregkh@suse.de>2007-07-12 16:29:50 -0700
commitba02978a48f0117b3d0aced97a30615a5d7412e2 (patch)
tree940377b0118e4ab82969b45ce6847e6864db4ad1 /drivers
parent4d68c0be69b65aa260448cea9fb1c555ae90d268 (diff)
downloadop-kernel-dev-ba02978a48f0117b3d0aced97a30615a5d7412e2.zip
op-kernel-dev-ba02978a48f0117b3d0aced97a30615a5d7412e2.tar.gz
USB: ehci_fsl update for MPC831x support
For MPC831x support, change the ehci-fsl driver to preserve bits set in platform code. Add a common CONFIG_USB_EHCI_FSL to indicate presence of Freescale EHCI SOC. Add FSL_USB2_DR_OTG operating mode support, thus both host and device can work for the mini-ab receptacle. Note: this doesn't enable OTG protocol support. Signed-off-by: Li Yang <leoli@freescale.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/usb/host/Kconfig7
-rw-r--r--drivers/usb/host/ehci-fsl.c10
-rw-r--r--drivers/usb/host/ehci-hcd.c2
3 files changed, 15 insertions, 4 deletions
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index a2bcca8..2f52982 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -77,6 +77,13 @@ config USB_EHCI_BIG_ENDIAN_DESC
depends on USB_EHCI_HCD && 440EPX
default y
+config USB_EHCI_FSL
+ bool
+ select USB_EHCI_ROOT_HUB_TT
+ default y if MPC834x || PPC_MPC831x
+ ---help---
+ Variation of ARC USB block used in some Freescale chips.
+
config USB_ISP116X_HCD
tristate "ISP116X HCD support"
depends on USB
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index c7a7c59..b7b7bfb 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -67,7 +67,8 @@ int usb_hcd_fsl_probe(const struct hc_driver *driver,
* in host mode.
*/
if (!((pdata->operating_mode == FSL_USB2_DR_HOST) ||
- (pdata->operating_mode == FSL_USB2_MPH_HOST))) {
+ (pdata->operating_mode == FSL_USB2_MPH_HOST) ||
+ (pdata->operating_mode == FSL_USB2_DR_OTG))) {
dev_err(&pdev->dev,
"Non Host Mode configured for %s. Wrong driver linked.\n",
pdev->dev.bus_id);
@@ -185,12 +186,14 @@ static void mpc83xx_usb_setup(struct usb_hcd *hcd)
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
struct fsl_usb2_platform_data *pdata;
void __iomem *non_ehci = hcd->regs;
+ u32 temp;
pdata =
(struct fsl_usb2_platform_data *)hcd->self.controller->
platform_data;
/* Enable PHY interface in the control reg. */
- out_be32(non_ehci + FSL_SOC_USB_CTRL, 0x00000004);
+ temp = in_be32(non_ehci + FSL_SOC_USB_CTRL);
+ out_be32(non_ehci + FSL_SOC_USB_CTRL, temp | 0x00000004);
out_be32(non_ehci + FSL_SOC_USB_SNOOP1, 0x0000001b);
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
@@ -206,7 +209,8 @@ static void mpc83xx_usb_setup(struct usb_hcd *hcd)
out_be32(non_ehci + FSL_SOC_USB_SNOOP2, 0x80000000 | SNOOP_SIZE_2GB);
#endif
- if (pdata->operating_mode == FSL_USB2_DR_HOST)
+ if ((pdata->operating_mode == FSL_USB2_DR_HOST) ||
+ (pdata->operating_mode == FSL_USB2_DR_OTG))
mpc83xx_setup_phy(ehci, pdata->phy_mode, 0);
if (pdata->operating_mode == FSL_USB2_MPH_HOST) {
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index f005438..889c202 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -994,7 +994,7 @@ MODULE_LICENSE ("GPL");
#define PCI_DRIVER ehci_pci_driver
#endif
-#ifdef CONFIG_MPC834x
+#ifdef CONFIG_USB_EHCI_FSL
#include "ehci-fsl.c"
#define PLATFORM_DRIVER ehci_fsl_driver
#endif
OpenPOWER on IntegriCloud