summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-12-12 11:30:02 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2012-12-12 11:30:02 -0800
commitb1286f4e9ac14c8973140b338b4d3c5691264d3b (patch)
tree5a67788bb2276cd67230d24b5a6994ddafb10707 /drivers
parent6facac1ab68fbf9cbad31a9d521f3a0d6aa9470e (diff)
parent0fa5d3996dbda1ee9653c43d39b7ef159fb57ee7 (diff)
downloadop-kernel-dev-b1286f4e9ac14c8973140b338b4d3c5691264d3b.zip
op-kernel-dev-b1286f4e9ac14c8973140b338b4d3c5691264d3b.tar.gz
Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM updates from Russell King: "Here's the updates for ARM for this merge window, which cover quite a variety of areas. There's a bunch of patch series from Will tackling various bugs like the PROT_NONE handling, ASID allocation, cluster boot protocol and ASID TLB tagging updates. We move to a build-time sorted exception table rather than doing the sorting at run-time, add support for the secure computing filter, and some updates to the perf code. We also have sorted out the placement of some headers, fixed some build warnings, fixed some hotplug problems with the per-cpu TWD code." * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (73 commits) ARM: 7594/1: Add .smp entry for REALVIEW_EB ARM: 7599/1: head: Remove boot-time HYP mode check for v5 and below ARM: 7598/1: net: bpf_jit_32: fix sp-relative load/stores offsets. ARM: 7595/1: syscall: rework ordering in syscall_trace_exit ARM: 7596/1: mmci: replace readsl/writesl with ioread32_rep/iowrite32_rep ARM: 7597/1: net: bpf_jit_32: fix kzalloc gfp/size mismatch. ARM: 7593/1: nommu: do not enable DCACHE_WORD_ACCESS when !CONFIG_MMU ARM: 7592/1: nommu: prevent generation of kernel unaligned memory accesses ARM: 7591/1: nommu: Enable the strict alignment (CR_A) bit only if ARCH < v6 ARM: 7590/1: /proc/interrupts: limit the display of IPIs to online CPUs only ARM: 7587/1: implement optimized percpu variable access ARM: 7589/1: integrator: pass the lm resource to amba ARM: 7588/1: amba: create a resource parent registrator ARM: 7582/2: rename kvm_seq to vmalloc_seq so to avoid confusion with KVM ARM: 7585/1: kernel: fix nr_cpu_ids check in DT logical map init ARM: 7584/1: perf: fix link error when CONFIG_HW_PERF_EVENTS is not selected ARM: gic: use a private mapping for CPU target interfaces ARM: kernel: add logical mappings look-up ARM: kernel: add cpu logical map DT init in setup_arch ARM: kernel: add device tree init map function ...
Diffstat (limited to 'drivers')
-rw-r--r--drivers/amba/bus.c32
-rw-r--r--drivers/mmc/host/mmci.c66
-rw-r--r--drivers/mmc/host/mmci.h4
-rw-r--r--drivers/tty/serial/atmel_serial.c18
-rw-r--r--drivers/tty/serial/sa1100.c2
-rw-r--r--drivers/usb/gadget/pxa25x_udc.c4
-rw-r--r--drivers/watchdog/sp805_wdt.c6
7 files changed, 81 insertions, 51 deletions
diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c
index e8eb91b..a2fc56d 100644
--- a/drivers/amba/bus.c
+++ b/drivers/amba/bus.c
@@ -546,7 +546,8 @@ EXPORT_SYMBOL_GPL(amba_device_add);
static struct amba_device *
amba_aphb_device_add(struct device *parent, const char *name,
resource_size_t base, size_t size, int irq1, int irq2,
- void *pdata, unsigned int periphid, u64 dma_mask)
+ void *pdata, unsigned int periphid, u64 dma_mask,
+ struct resource *resbase)
{
struct amba_device *dev;
int ret;
@@ -563,7 +564,7 @@ amba_aphb_device_add(struct device *parent, const char *name,
dev->dev.platform_data = pdata;
dev->dev.parent = parent;
- ret = amba_device_add(dev, &iomem_resource);
+ ret = amba_device_add(dev, resbase);
if (ret) {
amba_device_put(dev);
return ERR_PTR(ret);
@@ -578,7 +579,7 @@ amba_apb_device_add(struct device *parent, const char *name,
void *pdata, unsigned int periphid)
{
return amba_aphb_device_add(parent, name, base, size, irq1, irq2, pdata,
- periphid, 0);
+ periphid, 0, &iomem_resource);
}
EXPORT_SYMBOL_GPL(amba_apb_device_add);
@@ -588,10 +589,33 @@ amba_ahb_device_add(struct device *parent, const char *name,
void *pdata, unsigned int periphid)
{
return amba_aphb_device_add(parent, name, base, size, irq1, irq2, pdata,
- periphid, ~0ULL);
+ periphid, ~0ULL, &iomem_resource);
}
EXPORT_SYMBOL_GPL(amba_ahb_device_add);
+struct amba_device *
+amba_apb_device_add_res(struct device *parent, const char *name,
+ resource_size_t base, size_t size, int irq1,
+ int irq2, void *pdata, unsigned int periphid,
+ struct resource *resbase)
+{
+ return amba_aphb_device_add(parent, name, base, size, irq1, irq2, pdata,
+ periphid, 0, resbase);
+}
+EXPORT_SYMBOL_GPL(amba_apb_device_add_res);
+
+struct amba_device *
+amba_ahb_device_add_res(struct device *parent, const char *name,
+ resource_size_t base, size_t size, int irq1,
+ int irq2, void *pdata, unsigned int periphid,
+ struct resource *resbase)
+{
+ return amba_aphb_device_add(parent, name, base, size, irq1, irq2, pdata,
+ periphid, ~0ULL, resbase);
+}
+EXPORT_SYMBOL_GPL(amba_ahb_device_add_res);
+
+
static void amba_device_initialize(struct amba_device *dev, const char *name)
{
device_initialize(&dev->dev);
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index ec28d17..1507723 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -33,6 +33,7 @@
#include <linux/amba/mmci.h>
#include <linux/pm_runtime.h>
#include <linux/types.h>
+#include <linux/pinctrl/consumer.h>
#include <asm/div64.h>
#include <asm/io.h>
@@ -654,9 +655,31 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
/* The ST Micro variants has a special bit to enable SDIO */
if (variant->sdio && host->mmc->card)
- if (mmc_card_sdio(host->mmc->card))
+ if (mmc_card_sdio(host->mmc->card)) {
+ /*
+ * The ST Micro variants has a special bit
+ * to enable SDIO.
+ */
+ u32 clk;
+
datactrl |= MCI_ST_DPSM_SDIOEN;
+ /*
+ * The ST Micro variant for SDIO small write transfers
+ * needs to have clock H/W flow control disabled,
+ * otherwise the transfer will not start. The threshold
+ * depends on the rate of MCLK.
+ */
+ if (data->flags & MMC_DATA_WRITE &&
+ (host->size < 8 ||
+ (host->size <= 8 && host->mclk > 50000000)))
+ clk = host->clk_reg & ~variant->clkreg_enable;
+ else
+ clk = host->clk_reg | variant->clkreg_enable;
+
+ mmci_write_clkreg(host, clk);
+ }
+
/*
* Attempt to use DMA operation mode, if this
* should fail, fall back to PIO mode
@@ -840,14 +863,14 @@ static int mmci_pio_read(struct mmci_host *host, char *buffer, unsigned int rema
if (unlikely(count & 0x3)) {
if (count < 4) {
unsigned char buf[4];
- readsl(base + MMCIFIFO, buf, 1);
+ ioread32_rep(base + MMCIFIFO, buf, 1);
memcpy(ptr, buf, count);
} else {
- readsl(base + MMCIFIFO, ptr, count >> 2);
+ ioread32_rep(base + MMCIFIFO, ptr, count >> 2);
count &= ~0x3;
}
} else {
- readsl(base + MMCIFIFO, ptr, count >> 2);
+ ioread32_rep(base + MMCIFIFO, ptr, count >> 2);
}
ptr += count;
@@ -877,22 +900,6 @@ static int mmci_pio_write(struct mmci_host *host, char *buffer, unsigned int rem
count = min(remain, maxcnt);
/*
- * The ST Micro variant for SDIO transfer sizes
- * less then 8 bytes should have clock H/W flow
- * control disabled.
- */
- if (variant->sdio &&
- mmc_card_sdio(host->mmc->card)) {
- u32 clk;
- if (count < 8)
- clk = host->clk_reg & ~variant->clkreg_enable;
- else
- clk = host->clk_reg | variant->clkreg_enable;
-
- mmci_write_clkreg(host, clk);
- }
-
- /*
* SDIO especially may want to send something that is
* not divisible by 4 (as opposed to card sectors
* etc), and the FIFO only accept full 32-bit writes.
@@ -900,7 +907,7 @@ static int mmci_pio_write(struct mmci_host *host, char *buffer, unsigned int rem
* byte become a 32bit write, 7 bytes will be two
* 32bit writes etc.
*/
- writesl(base + MMCIFIFO, ptr, (count + 3) >> 2);
+ iowrite32_rep(base + MMCIFIFO, ptr, (count + 3) >> 2);
ptr += count;
remain -= count;
@@ -1360,6 +1367,23 @@ static int mmci_probe(struct amba_device *dev,
mmc->f_max = min(host->mclk, fmax);
dev_dbg(mmc_dev(mmc), "clocking block at %u Hz\n", mmc->f_max);
+ host->pinctrl = devm_pinctrl_get(&dev->dev);
+ if (IS_ERR(host->pinctrl)) {
+ ret = PTR_ERR(host->pinctrl);
+ goto clk_disable;
+ }
+
+ host->pins_default = pinctrl_lookup_state(host->pinctrl,
+ PINCTRL_STATE_DEFAULT);
+
+ /* enable pins to be muxed in and configured */
+ if (!IS_ERR(host->pins_default)) {
+ ret = pinctrl_select_state(host->pinctrl, host->pins_default);
+ if (ret)
+ dev_warn(&dev->dev, "could not set default pins\n");
+ } else
+ dev_warn(&dev->dev, "could not get default pinstate\n");
+
#ifdef CONFIG_REGULATOR
/* If we're using the regulator framework, try to fetch a regulator */
host->vcc = regulator_get(&dev->dev, "vmmc");
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index d437ccf..d34d8c0 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -195,6 +195,10 @@ struct mmci_host {
unsigned int size;
struct regulator *vcc;
+ /* pinctrl handles */
+ struct pinctrl *pinctrl;
+ struct pinctrl_state *pins_default;
+
#ifdef CONFIG_DMA_ENGINE
/* DMA stuff */
struct dma_chan *dma_current;
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index b95886c..1a8a271 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -44,7 +44,6 @@
#include <asm/io.h>
#include <asm/ioctls.h>
-#include <asm/mach/serial_at91.h>
#include <mach/board.h>
#ifdef CONFIG_ARM
@@ -1514,23 +1513,6 @@ static void atmel_init_port(struct atmel_uart_port *atmel_port,
}
}
-/*
- * Register board-specific modem-control line handlers.
- */
-void __init atmel_register_uart_fns(struct atmel_port_fns *fns)
-{
- if (fns->enable_ms)
- atmel_pops.enable_ms = fns->enable_ms;
- if (fns->get_mctrl)
- atmel_pops.get_mctrl = fns->get_mctrl;
- if (fns->set_mctrl)
- atmel_pops.set_mctrl = fns->set_mctrl;
- atmel_open_hook = fns->open;
- atmel_close_hook = fns->close;
- atmel_pops.pm = fns->pm;
- atmel_pops.set_wake = fns->set_wake;
-}
-
struct platform_device *atmel_default_console_device; /* the serial console device */
#ifdef CONFIG_SERIAL_ATMEL_CONSOLE
diff --git a/drivers/tty/serial/sa1100.c b/drivers/tty/serial/sa1100.c
index da56c8a..5d4b9b4 100644
--- a/drivers/tty/serial/sa1100.c
+++ b/drivers/tty/serial/sa1100.c
@@ -29,6 +29,7 @@
#include <linux/init.h>
#include <linux/console.h>
#include <linux/sysrq.h>
+#include <linux/platform_data/sa11x0-serial.h>
#include <linux/platform_device.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
@@ -39,7 +40,6 @@
#include <asm/irq.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
-#include <asm/mach/serial_sa1100.h>
/* We've been assigned a range on the "Low-density serial ports" major */
#define SERIAL_SA1100_MAJOR 204
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index 8efbf08..d4ca9f1 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -29,6 +29,7 @@
#include <linux/list.h>
#include <linux/interrupt.h>
#include <linux/mm.h>
+#include <linux/platform_data/pxa2xx_udc.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/irq.h>
@@ -59,9 +60,6 @@
#include <mach/lubbock.h>
#endif
-#include <asm/mach/udc_pxa2xx.h>
-
-
/*
* This driver handles the USB Device Controller (UDC) in Intel's PXA 25x
* series processors. The UDC for the IXP 4xx series is very similar.
diff --git a/drivers/watchdog/sp805_wdt.c b/drivers/watchdog/sp805_wdt.c
index 4552847..76c73cb 100644
--- a/drivers/watchdog/sp805_wdt.c
+++ b/drivers/watchdog/sp805_wdt.c
@@ -284,8 +284,7 @@ static int sp805_wdt_remove(struct amba_device *adev)
return 0;
}
-#ifdef CONFIG_PM
-static int sp805_wdt_suspend(struct device *dev)
+static int __maybe_unused sp805_wdt_suspend(struct device *dev)
{
struct sp805_wdt *wdt = dev_get_drvdata(dev);
@@ -295,7 +294,7 @@ static int sp805_wdt_suspend(struct device *dev)
return 0;
}
-static int sp805_wdt_resume(struct device *dev)
+static int __maybe_unused sp805_wdt_resume(struct device *dev)
{
struct sp805_wdt *wdt = dev_get_drvdata(dev);
@@ -304,7 +303,6 @@ static int sp805_wdt_resume(struct device *dev)
return 0;
}
-#endif /* CONFIG_PM */
static SIMPLE_DEV_PM_OPS(sp805_wdt_dev_pm_ops, sp805_wdt_suspend,
sp805_wdt_resume);
OpenPOWER on IntegriCloud