diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2014-06-14 19:49:48 -0500 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2014-06-14 19:49:48 -0500 |
commit | abf04af74a9f27a65172a43b43ccabcbc2bbdc39 (patch) | |
tree | a9336a3797f8f6c445b1439278f558310ceae56a /drivers | |
parent | 16d52ef7c026f925893a1c0fc46516349928f319 (diff) | |
parent | c7ee3bd4870ef1d96a1202f92ce858f849670a62 (diff) | |
download | op-kernel-dev-abf04af74a9f27a65172a43b43ccabcbc2bbdc39.zip op-kernel-dev-abf04af74a9f27a65172a43b43ccabcbc2bbdc39.tar.gz |
Merge tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"This is just a couple of drivers (hpsa and lpfc) that got left out for
further testing in linux-next. We also have one fix to a prior
submission (qla2xxx sparse)"
* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (36 commits)
qla2xxx: fix sparse warnings introduced by previous target mode t10-dif patch
lpfc: Update lpfc version to driver version 10.2.8001.0
lpfc: Fix ExpressLane priority setup
lpfc: mark old devices as obsolete
lpfc: Fix for initializing RRQ bitmap
lpfc: Fix for cleaning up stale ring flag and sp_queue_event entries
lpfc: Update lpfc version to driver version 10.2.8000.0
lpfc: Update Copyright on changed files from 8.3.45 patches
lpfc: Update Copyright on changed files
lpfc: Fixed locking for scsi task management commands
lpfc: Convert runtime references to old xlane cfg param to fof cfg param
lpfc: Fix FW dump using sysfs
lpfc: Fix SLI4 s abort loop to process all FCP rings and under ring_lock
lpfc: Fixed kernel panic in lpfc_abort_handler
lpfc: Fix locking for postbufq when freeing
lpfc: Fix locking for lpfc_hba_down_post
lpfc: Fix dynamic transitions of FirstBurst from on to off
hpsa: fix handling of hpsa_volume_offline return value
hpsa: return -ENOMEM not -1 on kzalloc failure in hpsa_get_device_id
hpsa: remove messages about volume status VPD inquiry page not supported
...
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/scsi/hpsa.c | 266 | ||||
-rw-r--r-- | drivers/scsi/hpsa.h | 42 | ||||
-rw-r--r-- | drivers/scsi/hpsa_cmd.h | 49 | ||||
-rw-r--r-- | drivers/scsi/lpfc/lpfc.h | 3 | ||||
-rw-r--r-- | drivers/scsi/lpfc/lpfc_attr.c | 23 | ||||
-rw-r--r-- | drivers/scsi/lpfc/lpfc_bsg.c | 2 | ||||
-rw-r--r-- | drivers/scsi/lpfc/lpfc_bsg.h | 2 | ||||
-rw-r--r-- | drivers/scsi/lpfc/lpfc_crtn.h | 6 | ||||
-rw-r--r-- | drivers/scsi/lpfc/lpfc_debugfs.c | 4 | ||||
-rw-r--r-- | drivers/scsi/lpfc/lpfc_els.c | 2 | ||||
-rw-r--r-- | drivers/scsi/lpfc/lpfc_hbadisc.c | 5 | ||||
-rw-r--r-- | drivers/scsi/lpfc/lpfc_hw.h | 2 | ||||
-rw-r--r-- | drivers/scsi/lpfc/lpfc_hw4.h | 2 | ||||
-rw-r--r-- | drivers/scsi/lpfc/lpfc_init.c | 258 | ||||
-rw-r--r-- | drivers/scsi/lpfc/lpfc_mem.c | 2 | ||||
-rw-r--r-- | drivers/scsi/lpfc/lpfc_scsi.c | 60 | ||||
-rw-r--r-- | drivers/scsi/lpfc/lpfc_scsi.h | 2 | ||||
-rw-r--r-- | drivers/scsi/lpfc/lpfc_sli.c | 297 | ||||
-rw-r--r-- | drivers/scsi/lpfc/lpfc_sli.h | 2 | ||||
-rw-r--r-- | drivers/scsi/lpfc/lpfc_sli4.h | 2 | ||||
-rw-r--r-- | drivers/scsi/lpfc/lpfc_version.h | 6 | ||||
-rw-r--r-- | drivers/scsi/qla2xxx/qla_def.h | 16 | ||||
-rw-r--r-- | drivers/scsi/qla2xxx/qla_target.c | 15 | ||||
-rw-r--r-- | drivers/scsi/qla2xxx/qla_target.h | 16 |
24 files changed, 715 insertions, 369 deletions
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 5858600..31184b3 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -48,6 +48,7 @@ #include <linux/bitmap.h> #include <linux/atomic.h> #include <linux/jiffies.h> +#include <linux/percpu.h> #include <asm/div64.h> #include "hpsa_cmd.h" #include "hpsa.h" @@ -193,7 +194,8 @@ static int number_of_controllers; static irqreturn_t do_hpsa_intr_intx(int irq, void *dev_id); static irqreturn_t do_hpsa_intr_msi(int irq, void *dev_id); static int hpsa_ioctl(struct scsi_device *dev, int cmd, void *arg); -static void start_io(struct ctlr_info *h); +static void lock_and_start_io(struct ctlr_info *h); +static void start_io(struct ctlr_info *h, unsigned long *flags); #ifdef CONFIG_COMPAT static int hpsa_compat_ioctl(struct scsi_device *dev, int cmd, void *arg); @@ -695,7 +697,7 @@ static inline void addQ(struct list_head *list, struct CommandList *c) static inline u32 next_command(struct ctlr_info *h, u8 q) { u32 a; - struct reply_pool *rq = &h->reply_queue[q]; + struct reply_queue_buffer *rq = &h->reply_queue[q]; unsigned long flags; if (h->transMethod & CFGTBL_Trans_io_accel1) @@ -844,8 +846,8 @@ static void enqueue_cmd_and_start_io(struct ctlr_info *h, spin_lock_irqsave(&h->lock, flags); addQ(&h->reqQ, c); h->Qdepth++; + start_io(h, &flags); spin_unlock_irqrestore(&h->lock, flags); - start_io(h); } static inline void removeQ(struct CommandList *c) @@ -1554,9 +1556,13 @@ static int handle_ioaccel_mode2_error(struct ctlr_info *h, dev_warn(&h->pdev->dev, "%s: task complete with check condition.\n", "HP SSD Smart Path"); + cmd->result |= SAM_STAT_CHECK_CONDITION; if (c2->error_data.data_present != - IOACCEL2_SENSE_DATA_PRESENT) + IOACCEL2_SENSE_DATA_PRESENT) { + memset(cmd->sense_buffer, 0, + SCSI_SENSE_BUFFERSIZE); break; + } /* copy the sense data */ data_len = c2->error_data.sense_data_len; if (data_len > SCSI_SENSE_BUFFERSIZE) @@ -1566,7 +1572,6 @@ static int handle_ioaccel_mode2_error(struct ctlr_info *h, sizeof(c2->error_data.sense_data_buff); memcpy(cmd->sense_buffer, c2->error_data.sense_data_buff, data_len); - cmd->result |= SAM_STAT_CHECK_CONDITION; retry = 1; break; case IOACCEL2_STATUS_SR_TASK_COMP_BUSY: @@ -1651,16 +1656,6 @@ static void process_ioaccel2_completion(struct ctlr_info *h, if (is_logical_dev_addr_mode(dev->scsi3addr) && c2->error_data.serv_response == IOACCEL2_SERV_RESPONSE_FAILURE) { - if (c2->error_data.status == - IOACCEL2_STATUS_SR_IOACCEL_DISABLED) - dev_warn(&h->pdev->dev, - "%s: Path is unavailable, retrying on standard path.\n", - "HP SSD Smart Path"); - else - dev_warn(&h->pdev->dev, - "%s: Error 0x%02x, retrying on standard path.\n", - "HP SSD Smart Path", c2->error_data.status); - dev->offload_enabled = 0; h->drv_req_rescan = 1; /* schedule controller for a rescan */ cmd->result = DID_SOFT_ERROR << 16; @@ -1991,20 +1986,26 @@ static inline void hpsa_scsi_do_simple_cmd_core(struct ctlr_info *h, wait_for_completion(&wait); } +static u32 lockup_detected(struct ctlr_info *h) +{ + int cpu; + u32 rc, *lockup_detected; + + cpu = get_cpu(); + lockup_detected = per_cpu_ptr(h->lockup_detected, cpu); + rc = *lockup_detected; + put_cpu(); + return rc; +} + static void hpsa_scsi_do_simple_cmd_core_if_no_lockup(struct ctlr_info *h, struct CommandList *c) { - unsigned long flags; - /* If controller lockup detected, fake a hardware error. */ - spin_lock_irqsave(&h->lock, flags); - if (unlikely(h->lockup_detected)) { - spin_unlock_irqrestore(&h->lock, flags); + if (unlikely(lockup_detected(h))) c->err_info->CommandStatus = CMD_HARDWARE_ERR; - } else { - spin_unlock_irqrestore(&h->lock, flags); + else hpsa_scsi_do_simple_cmd_core(h, c); - } } #define MAX_DRIVER_CMD_RETRIES 25 @@ -2429,7 +2430,7 @@ static int hpsa_get_device_id(struct ctlr_info *h, unsigned char *scsi3addr, buflen = 16; buf = kzalloc(64, GFP_KERNEL); if (!buf) - return -1; + return -ENOMEM; rc = hpsa_scsi_do_inquiry(h, scsi3addr, VPD_PAGE | 0x83, buf, 64); if (rc == 0) memcpy(device_id, &buf[8], buflen); @@ -2515,27 +2516,21 @@ static int hpsa_get_volume_status(struct ctlr_info *h, return HPSA_VPD_LV_STATUS_UNSUPPORTED; /* Does controller have VPD for logical volume status? */ - if (!hpsa_vpd_page_supported(h, scsi3addr, HPSA_VPD_LV_STATUS)) { - dev_warn(&h->pdev->dev, "Logical volume status VPD page is unsupported.\n"); + if (!hpsa_vpd_page_supported(h, scsi3addr, HPSA_VPD_LV_STATUS)) goto exit_failed; - } /* Get the size of the VPD return buffer */ rc = hpsa_scsi_do_inquiry(h, scsi3addr, VPD_PAGE | HPSA_VPD_LV_STATUS, buf, HPSA_VPD_HEADER_SZ); - if (rc != 0) { - dev_warn(&h->pdev->dev, "Logical volume status VPD inquiry failed.\n"); + if (rc != 0) goto exit_failed; - } size = buf[3]; /* Now get the whole VPD buffer */ rc = hpsa_scsi_do_inquiry(h, scsi3addr, VPD_PAGE | HPSA_VPD_LV_STATUS, buf, size + HPSA_VPD_HEADER_SZ); - if (rc != 0) { - dev_warn(&h->pdev->dev, "Logical volume status VPD inquiry failed.\n"); + if (rc != 0) goto exit_failed; - } status = buf[4]; /* status byte */ kfree(buf); @@ -2548,11 +2543,11 @@ exit_failed: /* Determine offline status of a volume. * Return either: * 0 (not offline) - * -1 (offline for unknown reasons) + * 0xff (offline for unknown reasons) * # (integer code indicating one of several NOT READY states * describing why a volume is to be kept offline) */ -static unsigned char hpsa_volume_offline(struct ctlr_info *h, +static int hpsa_volume_offline(struct ctlr_info *h, unsigned char scsi3addr[]) { struct CommandList *c; @@ -2651,11 +2646,15 @@ static int hpsa_update_device_info(struct ctlr_info *h, if (this_device->devtype == TYPE_DISK && is_logical_dev_addr_mode(scsi3addr)) { + int volume_offline; + hpsa_get_raid_level(h, scsi3addr, &this_device->raid_level); if (h->fw_support & MISC_FW_RAID_OFFLOAD_BASIC) hpsa_get_ioaccel_status(h, scsi3addr, this_device); - this_device->volume_offline = - hpsa_volume_offline(h, scsi3addr); + volume_offline = hpsa_volume_offline(h, scsi3addr); + if (volume_offline < 0 || volume_offline > 0xff) + volume_offline = HPSA_VPD_LV_STATUS_UNSUPPORTED; + this_device->volume_offline = volume_offline & 0xff; } else { this_device->raid_level = RAID_UNKNOWN; this_device->offload_config = 0; @@ -2861,26 +2860,20 @@ static int hpsa_get_pdisk_of_ioaccel2(struct ctlr_info *h, nphysicals = be32_to_cpu(*((__be32 *)physicals->LUNListLength)) / responsesize; - /* find ioaccel2 handle in list of physicals: */ for (i = 0; i < nphysicals; i++) { + struct ext_report_lun_entry *entry = &physicals->LUN[i]; + /* handle is in bytes 28-31 of each lun */ - if (memcmp(&((struct ReportExtendedLUNdata *) - physicals)->LUN[i][20], &find, 4) != 0) { + if (entry->ioaccel_handle != find) continue; /* didn't match */ - } found = 1; - memcpy(scsi3addr, &((struct ReportExtendedLUNdata *) - physicals)->LUN[i][0], 8); + memcpy(scsi3addr, entry->lunid, 8); if (h->raid_offload_debug > 0) dev_info(&h->pdev->dev, - "%s: Searched h=0x%08x, Found h=0x%08x, scsiaddr 0x%02x%02x%02x%02x%02x%02x%02x%02x\n", + "%s: Searched h=0x%08x, Found h=0x%08x, scsiaddr 0x%8phN\n", __func__, find, - ((struct ReportExtendedLUNdata *) - physicals)->LUN[i][20], - scsi3addr[0], scsi3addr[1], scsi3addr[2], - scsi3addr[3], scsi3addr[4], scsi3addr[5], - scsi3addr[6], scsi3addr[7]); + entry->ioaccel_handle, scsi3addr); break; /* found it */ } @@ -2965,7 +2958,8 @@ u8 *figure_lunaddrbytes(struct ctlr_info *h, int raid_ctlr_position, int i, return RAID_CTLR_LUNID; if (i < logicals_start) - return &physdev_list->LUN[i - (raid_ctlr_position == 0)][0]; + return &physdev_list->LUN[i - + (raid_ctlr_position == 0)].lunid[0]; if (i < last_device) return &logdev_list->LUN[i - nphysicals - @@ -3074,7 +3068,7 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) ndev_allocated++; } - if (unlikely(is_scsi_rev_5(h))) + if (is_scsi_rev_5(h)) raid_ctlr_position = 0; else raid_ctlr_position = nphysicals + nlogicals; @@ -3971,7 +3965,6 @@ static int hpsa_scsi_queue_command_lck(struct scsi_cmnd *cmd, struct hpsa_scsi_dev_t *dev; unsigned char scsi3addr[8]; struct CommandList *c; - unsigned long flags; int rc = 0; /* Get the ptr to our adapter structure out of cmd->host. */ @@ -3984,14 +3977,11 @@ static int hpsa_scsi_queue_command_lck(struct scsi_cmnd *cmd, } memcpy(scsi3addr, dev->scsi3addr, sizeof(scsi3addr)); - spin_lock_irqsave(&h->lock, flags); - if (unlikely(h->lockup_detected)) { - spin_unlock_irqrestore(&h->lock, flags); + if (unlikely(lockup_detected(h))) { cmd->result = DID_ERROR << 16; done(cmd); return 0; } - spin_unlock_irqrestore(&h->lock, flags); c = cmd_alloc(h); if (c == NULL) { /* trouble... */ dev_err(&h->pdev->dev, "cmd_alloc returned NULL!\n"); @@ -4103,16 +4093,13 @@ static int do_not_scan_if_controller_locked_up(struct ctlr_info *h) * we can prevent new rescan threads from piling up on a * locked up controller. */ - spin_lock_irqsave(&h->lock, flags); - if (unlikely(h->lockup_detected)) { - spin_unlock_irqrestore(&h->lock, flags); + if (unlikely(lockup_detected(h))) { spin_lock_irqsave(&h->scan_lock, flags); h->scan_finished = 1; wake_up_all(&h->scan_wait_queue); spin_unlock_irqrestore(&h->scan_lock, flags); return 1; } - spin_unlock_irqrestore(&h->lock, flags); return 0; } @@ -4963,7 +4950,7 @@ static int hpsa_passthru_ioctl(struct ctlr_info *h, void __user *argp) buff = kmalloc(iocommand.buf_size, GFP_KERNEL); if (buff == NULL) return -EFAULT; - if (iocommand.Request.Type.Direction == XFER_WRITE) { + if (iocommand.Request.Type.Direction & XFER_WRITE) { /* Copy the data into the buffer we created */ if (copy_from_user(buff, iocommand.buf, iocommand.buf_size)) { @@ -5026,7 +5013,7 @@ static int hpsa_passthru_ioctl(struct ctlr_info *h, void __user *argp) rc = -EFAULT; goto out; } - if (iocommand.Request.Type.Direction == XFER_READ && + if ((iocommand.Request.Type.Direction & XFER_READ) && iocommand.buf_size > 0) { /* Copy the data out of the buffer we created */ if (copy_to_user(iocommand.buf, buff, iocommand.buf_size)) { @@ -5103,7 +5090,7 @@ static int hpsa_big_passthru_ioctl(struct ctlr_info *h, void __user *argp) status = -ENOMEM; goto cleanup1; } - if (ioc->Request.Type.Direction == XFER_WRITE) { + if (ioc->Request.Type.Direction & XFER_WRITE) { if (copy_from_user(buff[sg_used], data_ptr, sz)) { status = -ENOMEM; goto cleanup1; @@ -5155,7 +5142,7 @@ static int hpsa_big_passthru_ioctl(struct ctlr_info *h, void __user *argp) status = -EFAULT; goto cleanup0; } - if (ioc->Request.Type.Direction == XFER_READ && ioc->buf_size > 0) { + if ((ioc->Request.Type.Direction & XFER_READ) && ioc->buf_size > 0) { /* Copy the data out of the buffer we created */ BYTE __user *ptr = ioc->buf; for (i = 0; i < sg_used; i++) { @@ -5459,13 +5446,12 @@ static void __iomem *remap_pci_mem(ulong base, ulong size) /* Takes cmds off the submission queue and sends them to the hardware, * then puts them on the queue of cmds waiting for completion. + * Assumes h->lock is held */ -static void start_io(struct ctlr_info *h) +static void start_io(struct ctlr_info *h, unsigned long *flags) { struct CommandList *c; - unsigned long flags; - spin_lock_irqsave(&h->lock, flags); while (!list_empty(&h->reqQ)) { c = list_entry(h->reqQ.next, struct CommandList, list); /* can't do anything if fifo is full */ @@ -5488,14 +5474,20 @@ static void start_io(struct ctlr_info *h) * condition. */ h->commands_outstanding++; - if (h->commands_outstanding > h->max_outstanding) - h->max_outstanding = h->commands_outstanding; /* Tell the controller execute command */ - spin_unlock_irqrestore(&h->lock, flags); + spin_unlock_irqrestore(&h->lock, *flags); h->access.submit_command(h, c); - spin_lock_irqsave(&h->lock, flags); + spin_lock_irqsave(&h->lock, *flags); } +} + +static void lock_and_start_io(struct ctlr_info *h) +{ + unsigned long flags; + + spin_lock_irqsave(&h->lock, flags); + start_io(h, &flags); spin_unlock_irqrestore(&h->lock, flags); } @@ -5563,7 +5555,7 @@ static inline void finish_cmd(struct CommandList *c) else if (c->cmd_type == CMD_IOCTL_PEND) complete(c->waiting); if (unlikely(io_may_be_stalled)) - start_io(h); + lock_and_start_io(h); } static inline u32 hpsa_tag_contains_index(u32 tag) @@ -5840,12 +5832,12 @@ static int hpsa_controller_hard_reset(struct pci_dev *pdev, dev_info(&pdev->dev, "using doorbell to reset controller\n"); writel(use_doorbell, vaddr + SA5_DOORBELL); - /* PMC hardware guys tell us we need a 5 second delay after + /* PMC hardware guys tell us we need a 10 second delay after * doorbell reset and before any attempt to talk to the board * at all to ensure that this actually works and doesn't fall * over in some weird corner cases. */ - msleep(5000); + msleep(10000); } else { /* Try to do it the PCI power state way */ /* Quoting from the Open CISS Specification: "The Power @@ -6166,6 +6158,8 @@ static void hpsa_interrupt_mode(struct ctlr_info *h) if (pci_find_capability(h->pdev, PCI_CAP_ID_MSIX)) { dev_info(&h->pdev->dev, "MSIX\n"); h->msix_vector = MAX_REPLY_QUEUES; + if (h->msix_vector > num_online_cpus()) + h->msix_vector = num_online_cpus(); err = pci_enable_msix(h->pdev, hpsa_msix_entries, h->msix_vector); if (err > 0) { @@ -6615,6 +6609,17 @@ static void hpsa_free_cmd_pool(struct ctlr_info *h) h->ioaccel_cmd_pool, h->ioaccel_cmd_pool_dhandle); } +static void hpsa_irq_affinity_hints(struct ctlr_info *h) +{ + int i, cpu, rc; + + cpu = cpumask_first(cpu_online_mask); + for (i = 0; i < h->msix_vector; i++) { + rc = irq_set_affinity_hint(h->intr[i], get_cpu_mask(cpu)); + cpu = cpumask_next(cpu, cpu_online_mask); + } +} + static int hpsa_request_irq(struct ctlr_info *h, irqreturn_t (*msixhandler)(int, void *), irqreturn_t (*intxhandler)(int, void *)) @@ -6634,6 +6639,7 @@ static int hpsa_request_irq(struct ctlr_info *h, rc = request_irq(h->intr[i], msixhandler, 0, h->devname, &h->q[i]); + hpsa_irq_affinity_hints(h); } else { /* Use single reply pool */ if (h->msix_vector > 0 || h->msi_vector) { @@ -6685,12 +6691,15 @@ static void free_irqs(struct ctlr_info *h) if (!h->msix_vector || h->intr_mode != PERF_MODE_INT) { /* Single reply queue, only one irq to free */ i = h->intr_mode; + irq_set_affinity_hint(h->intr[i], NULL); free_irq(h->intr[i], &h->q[i]); return; } - for (i = 0; i < h->msix_vector; i++) + for (i = 0; i < h->msix_vector; i++) { + irq_set_affinity_hint(h->intr[i], NULL); free_irq(h->intr[i], &h->q[i]); + } } static void hpsa_free_irqs_and_disable_msix(struct ctlr_info *h) @@ -6707,6 +6716,20 @@ static void hpsa_free_irqs_and_disable_msix(struct ctlr_info *h) #endif /* CONFIG_PCI_MSI */ } +static void hpsa_free_reply_queues(struct ctlr_info *h) +{ + int i; + + for (i = 0; i < h->nreply_queues; i++) { + if (!h->reply_queue[i].head) + continue; + pci_free_consistent(h->pdev, h->reply_queue_size, + h->reply_queue[i].head, h->reply_queue[i].busaddr); + h->reply_queue[i].head = NULL; + h->reply_queue[i].busaddr = 0; + } +} + static void hpsa_undo_allocations_after_kdump_soft_reset(struct ctlr_info *h) { hpsa_free_irqs_and_disable_msix(h); @@ -6714,8 +6737,7 @@ static void hpsa_undo_allocations_after_kdump_soft_reset(struct ctlr_info *h) hpsa_free_cmd_pool(h); kfree(h->ioaccel1_blockFetchTable); kfree(h->blockFetchTable); - pci_free_consistent(h->pdev, h->reply_pool_size, - h->reply_pool, h->reply_pool_dhandle); + hpsa_free_reply_queues(h); if (h->vaddr) iounmap(h->vaddr); if (h->transtable) @@ -6740,16 +6762,38 @@ static void fail_all_cmds_on_list(struct ctlr_info *h, struct list_head *list) } } +static void set_lockup_detected_for_all_cpus(struct ctlr_info *h, u32 value) +{ + int i, cpu; + + cpu = cpumask_first(cpu_online_mask); + for (i = 0; i < num_online_cpus(); i++) { + u32 *lockup_detected; + lockup_detected = per_cpu_ptr(h->lockup_detected, cpu); + *lockup_detected = value; + cpu = cpumask_next(cpu, cpu_online_mask); + } + wmb(); /* be sure the per-cpu variables are out to memory */ +} + static void controller_lockup_detected(struct ctlr_info *h) { unsigned long flags; + u32 lockup_detected; h->access.set_intr_mask(h, HPSA_INTR_OFF); spin_lock_irqsave(&h->lock, flags); - h->lockup_detected = readl(h->vaddr + SA5_SCRATCHPAD_OFFSET); + lockup_detected = readl(h->vaddr + SA5_SCRATCHPAD_OFFSET); + if (!lockup_detected) { + /* no heartbeat, but controller gave us a zero. */ + dev_warn(&h->pdev->dev, + "lockup detected but scratchpad register is zero\n"); + lockup_detected = 0xffffffff; + } + set_lockup_detected_for_all_cpus(h, lockup_detected); spin_unlock_irqrestore(&h->lock, flags); dev_warn(&h->pdev->dev, "Controller lockup detected: 0x%08x\n", - h->lockup_detected); + lockup_detected); pci_disable_device(h->pdev); spin_lock_irqsave(&h->lock, flags); fail_all_cmds_on_list(h, &h->cmpQ); @@ -6884,7 +6928,7 @@ static void hpsa_monitor_ctlr_worker(struct work_struct *work) struct ctlr_info *h = container_of(to_delayed_work(work), struct ctlr_info, monitor_ctlr_work); detect_controller_lockup(h); - if (h->lockup_detected) + if (lockup_detected(h)) return; if (hpsa_ctlr_needs_rescan(h) || hpsa_offline_devices_ready(h)) { @@ -6934,7 +6978,6 @@ reinit_after_soft_reset: * the 5 lower bits of the address are used by the hardware. and by * the driver. See comments in hpsa.h for more info. */ -#define COMMANDLIST_ALIGNMENT 128 BUILD_BUG_ON(sizeof(struct CommandList) % COMMANDLIST_ALIGNMENT); h = kzalloc(sizeof(*h), GFP_KERNEL); if (!h) @@ -6949,6 +6992,13 @@ reinit_after_soft_reset: spin_lock_init(&h->offline_device_lock); spin_lock_init(&h->scan_lock); spin_lock_init(&h->passthru_count_lock); + + /* Allocate and clear per-cpu variable lockup_detected */ + h->lockup_detected = alloc_percpu(u32); + if (!h->lockup_detected) + goto clean1; + set_lockup_detected_for_all_cpus(h, 0); + rc = hpsa_pci_init(h); if (rc != 0) goto clean1; @@ -7072,6 +7122,8 @@ clean4: free_irqs(h); clean2: clean1: + if (h->lockup_detected) + free_percpu(h->lockup_detected); kfree(h); return rc; } @@ -7080,16 +7132,10 @@ static void hpsa_flush_cache(struct ctlr_info *h) { char *flush_buf; struct CommandList *c; - unsigned long flags; /* Don't bother trying to flush the cache if locked up */ - spin_lock_irqsave(&h->lock, flags); - if (unlikely(h->lockup_detected)) { - spin_unlock_irqrestore(&h->lock, flags); + if (unlikely(lockup_detected(h))) return; - } - spin_unlock_irqrestore(&h->lock, flags); - flush_buf = kzalloc(4, GFP_KERNEL); if (!flush_buf) return; @@ -7165,8 +7211,7 @@ static void hpsa_remove_one(struct pci_dev *pdev) pci_free_consistent(h->pdev, h->nr_cmds * sizeof(struct ErrorInfo), h->errinfo_pool, h->errinfo_pool_dhandle); - pci_free_consistent(h->pdev, h->reply_pool_size, - h->reply_pool, h->reply_pool_dhandle); + hpsa_free_reply_queues(h); kfree(h->cmd_pool_bits); kfree(h->blockFetchTable); kfree(h->ioaccel1_blockFetchTable); @@ -7174,6 +7219,7 @@ static void hpsa_remove_one(struct pci_dev *pdev) kfree(h->hba_inquiry_data); pci_disable_device(pdev); pci_release_regions(pdev); + free_percpu(h->lockup_detected); kfree(h); } @@ -7278,8 +7324,16 @@ static void hpsa_enter_performant_mode(struct ctlr_info *h, u32 trans_support) * 10 = 6 s/g entry or 24k */ + /* If the controller supports either ioaccel method then + * we can also use the RAID stack submit path that does not + * perform the superfluous readl() after each command submission. + */ + if (trans_support & (CFGTBL_Trans_io_accel1 | CFGTBL_Trans_io_accel2)) + access = SA5_performant_access_no_read; + /* Controller spec: zero out this buffer. */ - memset(h->reply_pool, 0, h->reply_pool_size); + for (i = 0; i < h->nreply_queues; i++) + memset(h->reply_queue[i].head, 0, h->reply_queue_size); bft[7] = SG_ENTRIES_IN_CMD + 4; calc_bucket_map(bft, ARRAY_SIZE(bft), @@ -7295,8 +7349,7 @@ static void hpsa_enter_performant_mode(struct ctlr_info *h, u32 trans_support) for (i = 0; i < h->nreply_queues; i++) { writel(0, &h->transtable->RepQAddr[i].upper); - writel(h->reply_pool_dhandle + - (h->max_commands * sizeof(u64) * i), + writel(h->reply_queue[i].busaddr, &h->transtable->RepQAddr[i].lower); } @@ -7344,8 +7397,10 @@ static void hpsa_enter_performant_mode(struct ctlr_info *h, u32 trans_support) h->ioaccel1_blockFetchTable); /* initialize all reply queue entries to unused */ - memset(h->reply_pool, (u8) IOACCEL_MODE1_REPLY_UNUSED, - h->reply_pool_size); + for (i = 0; i < h->nreply_queues; i++) + memset(h->reply_queue[i].head, + (u8) IOACCEL_MODE1_REPLY_UNUSED, + h->reply_queue_size); /* set all the constant fields in the accelerator command * frames once at init time to save CPU cycles later. @@ -7407,7 +7462,6 @@ static int hpsa_alloc_ioaccel_cmd_and_bft(struct ctlr_info *h) * because the 7 lower bits of the address are used by the * hardware. */ -#define IOACCEL1_COMMANDLIST_ALIGNMENT 128 BUILD_BUG_ON(sizeof(struct io_accel1_cmd) % IOACCEL1_COMMANDLIST_ALIGNMENT); h->ioaccel_cmd_pool = @@ -7445,7 +7499,6 @@ static int ioaccel2_alloc_cmds_and_bft(struct ctlr_info *h) if (h->ioaccel_maxsg > IOACCEL2_MAXSGENTRIES) h->ioaccel_maxsg = IOACCEL2_MAXSGENTRIES; -#define IOACCEL2_COMMANDLIST_ALIGNMENT 128 BUILD_BUG_ON(sizeof(struct io_accel2_cmd) % IOACCEL2_COMMANDLIST_ALIGNMENT); h->ioaccel2_cmd_pool = @@ -7503,16 +7556,17 @@ static void hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h) } } - /* TODO, check that this next line h->nreply_queues is correct */ h->nreply_queues = h->msix_vector > 0 ? h->msix_vector : 1; hpsa_get_max_perf_mode_cmds(h); /* Performant mode ring buffer and supporting data structures */ - h->reply_pool_size = h->max_commands * sizeof(u64) * h->nreply_queues; - h->reply_pool = pci_alloc_consistent(h->pdev, h->reply_pool_size, - &(h->reply_pool_dhandle)); + h->reply_queue_size = h->max_commands * sizeof(u64); for (i = 0; i < h->nreply_queues; i++) { - h->reply_queue[i].head = &h->reply_pool[h->max_commands * i]; + h->reply_queue[i].head = pci_alloc_consistent(h->pdev, + h->reply_queue_size, + &(h->reply_queue[i].busaddr)); + if (!h->reply_queue[i].head) + goto clean_up; h->reply_queue[i].size = h->max_commands; h->reply_queue[i].wraparound = 1; /* spec: init to 1 */ h->reply_queue[i].current_entry = 0; @@ -7521,18 +7575,14 @@ static void hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h) /* Need a block fetch table for performant mode */ h->blockFetchTable = kmalloc(((SG_ENTRIES_IN_CMD + 1) * sizeof(u32)), GFP_KERNEL); - - if ((h->reply_pool == NULL) - || (h->blockFetchTable == NULL)) + if (!h->blockFetchTable) goto clean_up; hpsa_enter_performant_mode(h, trans_support); return; clean_up: - if (h->reply_pool) - pci_free_consistent(h->pdev, h->reply_pool_size, - h->reply_pool, h->reply_pool_dhandle); + hpsa_free_reply_queues(h); kfree(h->blockFetchTable); } diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h index 1e3cf33..24472ce 100644 --- a/drivers/scsi/hpsa.h +++ b/drivers/scsi/hpsa.h @@ -57,11 +57,12 @@ struct hpsa_scsi_dev_t { }; -struct reply_pool { +struct reply_queue_buffer { u64 *head; size_t size; u8 wraparound; u32 current_entry; + dma_addr_t busaddr; }; #pragma pack(1) @@ -116,11 +117,8 @@ struct ctlr_info { int nr_cmds; /* Number of commands allowed on this controller */ struct CfgTable __iomem *cfgtable; int interrupts_enabled; - int major; int max_commands; int commands_outstanding; - int max_outstanding; /* Debug */ - int usage_count; /* number of opens all all minor devices */ # define PERF_MODE_INT 0 # define DOORBELL_INT 1 # define SIMPLE_MODE_INT 2 @@ -177,11 +175,9 @@ struct ctlr_info { /* * Performant mode completion buffers */ - u64 *reply_pool; - size_t reply_pool_size; - struct reply_pool reply_queue[MAX_REPLY_QUEUES]; + size_t reply_queue_size; + struct reply_queue_buffer reply_queue[MAX_REPLY_QUEUES]; u8 nreply_queues; - dma_addr_t reply_pool_dhandle; u32 *blockFetchTable; u32 *ioaccel1_blockFetchTable; u32 *ioaccel2_blockFetchTable; @@ -196,7 +192,7 @@ struct ctlr_info { u64 last_heartbeat_timestamp; u32 heartbeat_sample_interval; atomic_t firmware_flash_in_progress; - u32 lockup_detected; + u32 *lockup_detected; struct delayed_work monitor_ctlr_work; int remove_in_progress; u32 fifo_recently_full; @@ -233,11 +229,9 @@ struct ctlr_info { #define CTLR_STATE_CHANGE_EVENT_AIO_CONFIG_CHANGE (1 << 31) #define RESCAN_REQUIRED_EVENT_BITS \ - (CTLR_STATE_CHANGE_EVENT | \ - CTLR_ENCLOSURE_HOT_PLUG_EVENT | \ + (CTLR_ENCLOSURE_HOT_PLUG_EVENT | \ CTLR_STATE_CHANGE_EVENT_PHYSICAL_DRV | \ CTLR_STATE_CHANGE_EVENT_LOGICAL_DRV | \ - CTLR_STATE_CHANGE_EVENT_REDUNDANT_CNTRL | \ CTLR_STATE_CHANGE_EVENT_AIO_ENABLED_DISABLED | \ CTLR_STATE_CHANGE_EVENT_AIO_CONFIG_CHANGE) spinlock_t offline_device_lock; @@ -346,22 +340,23 @@ struct offline_device_entry { static void SA5_submit_command(struct ctlr_info *h, struct CommandList *c) { - dev_dbg(&h->pdev->dev, "Sending %x, tag = %x\n", c->busaddr, - c->Header.Tag.lower); writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET); (void) readl(h->vaddr + SA5_SCRATCHPAD_OFFSET); } +static void SA5_submit_command_no_read(struct ctlr_info *h, + struct CommandList *c) +{ + writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET); +} + static void SA5_submit_command_ioaccel2(struct ctlr_info *h, struct CommandList *c) { - dev_dbg(&h->pdev->dev, "Sending %x, tag = %x\n", c->busaddr, - c->Header.Tag.lower); if (c->cmd_type == CMD_IOACCEL2) writel(c->busaddr, h->vaddr + IOACCEL2_INBOUND_POSTQ_32); else writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET); - (void) readl(h->vaddr + SA5_SCRATCHPAD_OFFSET); } /* @@ -399,7 +394,7 @@ static void SA5_performant_intr_mask(struct ctlr_info *h, unsigned long val) static unsigned long SA5_performant_completed(struct ctlr_info *h, u8 q) { - struct reply_pool *rq = &h->reply_queue[q]; + struct reply_queue_buffer *rq = &h->reply_queue[q]; unsigned long flags, register_value = FIFO_EMPTY; /* msi auto clears the interrupt pending bit. */ @@ -478,7 +473,6 @@ static bool SA5_intr_pending(struct ctlr_info *h) { unsigned long register_value = readl(h->vaddr + SA5_INTR_STATUS); - dev_dbg(&h->pdev->dev, "intr_pending %lx\n", register_value); return register_value & SA5_INTR_PENDING; } @@ -515,7 +509,7 @@ static bool SA5_ioaccel_mode1_intr_pending(struct ctlr_info *h) static unsigned long SA5_ioaccel_mode1_completed(struct ctlr_info *h, u8 q) { u64 register_value; - struct reply_pool *rq = &h->reply_queue[q]; + struct reply_queue_buffer *rq = &h->reply_queue[q]; unsigned long flags; BUG_ON(q >= h->nreply_queues); @@ -573,6 +567,14 @@ static struct access_method SA5_performant_access = { SA5_performant_completed, }; +static struct access_method SA5_performant_access_no_read = { + SA5_submit_command_no_read, + SA5_performant_intr_mask, + SA5_fifo_full, + SA5_performant_intr_pending, + SA5_performant_completed, +}; + struct board_type { u32 board_id; char *product_name; diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h index b5cc705..b5125dc 100644 --- a/drivers/scsi/hpsa_cmd.h +++ b/drivers/scsi/hpsa_cmd.h @@ -151,7 +151,7 @@ #define HPSA_VPD_HEADER_SZ 4 /* Logical volume states */ -#define HPSA_VPD_LV_STATUS_UNSUPPORTED -1 +#define HPSA_VPD_LV_STATUS_UNSUPPORTED 0xff #define HPSA_LV_OK 0x0 #define HPSA_LV_UNDERGOING_ERASE 0x0F #define HPSA_LV_UNDERGOING_RPI 0x12 @@ -238,11 +238,21 @@ struct ReportLUNdata { u8 LUN[HPSA_MAX_LUN][8]; }; +struct ext_report_lun_entry { + u8 lunid[8]; + u8 wwid[8]; + u8 device_type; + u8 device_flags; + u8 lun_count; /* multi-lun device, how many luns */ + u8 redundant_paths; + u32 ioaccel_handle; /* ioaccel1 only uses lower 16 bits */ +}; + struct ReportExtendedLUNdata { u8 LUNListLength[4]; u8 extended_response_flag; u8 reserved[3]; - u8 LUN[HPSA_MAX_LUN][24]; + struct ext_report_lun_entry LUN[HPSA_MAX_LUN]; }; struct SenseSubsystem_info { @@ -375,6 +385,7 @@ struct ctlr_info; /* defined in hpsa.h */ * or a bus address. */ +#define COMMANDLIST_ALIGNMENT 128 struct CommandList { struct CommandListHeader Header; struct RequestBlock Request; @@ -389,21 +400,7 @@ struct CommandList { struct list_head list; struct completion *waiting; void *scsi_cmd; - -/* on 64 bit architectures, to get this to be 32-byte-aligned - * it so happens we need PAD_64 bytes of padding, on 32 bit systems, - * we need PAD_32 bytes of padding (see below). This does that. - * If it happens that 64 bit and 32 bit systems need different - * padding, PAD_32 and PAD_64 can be set independently, and. - * the code below will do the right thing. - */ -#define IS_32_BIT ((8 - sizeof(long))/4) -#define IS_64_BIT (!IS_32_BIT) -#define PAD_32 (40) -#define PAD_64 (12) -#define COMMANDLIST_PAD (IS_32_BIT * PAD_32 + IS_64_BIT * PAD_64) - u8 pad[COMMANDLIST_PAD]; -}; +} __aligned(COMMANDLIST_ALIGNMENT); /* Max S/G elements in I/O accelerator command */ #define IOACCEL1_MAXSGENTRIES 24 @@ -413,6 +410,7 @@ struct CommandList { * Structure for I/O accelerator (mode 1) commands. * Note that this structure must be 128-byte aligned in size. */ +#define IOACCEL1_COMMANDLIST_ALIGNMENT 128 struct io_accel1_cmd { u16 dev_handle; /* 0x00 - 0x01 */ u8 reserved1; /* 0x02 */ @@ -440,12 +438,7 @@ struct io_accel1_cmd { struct vals32 host_addr; /* 0x70 - 0x77 */ u8 CISS_LUN[8]; /* 0x78 - 0x7F */ struct SGDescriptor SG[IOACCEL1_MAXSGENTRIES]; -#define IOACCEL1_PAD_64 0 -#define IOACCEL1_PAD_32 0 -#define IOACCEL1_PAD (IS_32_BIT * IOACCEL1_PAD_32 + \ - IS_64_BIT * IOACCEL1_PAD_64) - u8 pad[IOACCEL1_PAD]; -}; +} __aligned(IOACCEL1_COMMANDLIST_ALIGNMENT); #define IOACCEL1_FUNCTION_SCSIIO 0x00 #define IOACCEL1_SGLOFFSET 32 @@ -510,14 +503,11 @@ struct io_accel2_scsi_response { u8 sense_data_buff[32]; /* sense/response data buffer */ }; -#define IOACCEL2_64_PAD 76 -#define IOACCEL2_32_PAD 76 -#define IOACCEL2_PAD (IS_32_BIT * IOACCEL2_32_PAD + \ - IS_64_BIT * IOACCEL2_64_PAD) /* * Structure for I/O accelerator (mode 2 or m2) commands. * Note that this structure must be 128-byte aligned in size. */ +#define IOACCEL2_COMMANDLIST_ALIGNMENT 128 struct io_accel2_cmd { u8 IU_type; /* IU Type */ u8 direction; /* direction, memtype, and encryption */ @@ -544,8 +534,7 @@ struct io_accel2_cmd { u32 tweak_upper; /* Encryption tweak, upper 4 bytes */ struct ioaccel2_sg_element sg[IOACCEL2_MAXSGENTRIES]; struct io_accel2_scsi_response error_data; - u8 pad[IOACCEL2_PAD]; -}; +} __aligned(IOACCEL2_COMMANDLIST_ALIGNMENT); /* * defines for Mode 2 command struct @@ -636,7 +625,7 @@ struct TransTable_struct { u32 RepQCount; u32 RepQCtrAddrLow32; u32 RepQCtrAddrHigh32; -#define MAX_REPLY_QUEUES 8 +#define MAX_REPLY_QUEUES 64 struct vals32 RepQAddr[MAX_REPLY_QUEUES]; }; diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index 94a3caf..434e903 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2013 Emulex. All rights reserved. * + * Copyright (C) 2004-2014 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * Portions Copyright (C) 2004-2005 Christoph Hellwig * @@ -640,6 +640,7 @@ struct lpfc_hba { #define HBA_DEVLOSS_TMO 0x2000 /* HBA in devloss timeout */ #define HBA_RRQ_ACTIVE 0x4000 /* process the rrq active list */ #define HBA_FCP_IOQ_FLUSH 0x8000 /* FCP I/O queues being flushed */ +#define HBA_FW_DUMP_OP 0x10000 /* Skips fn reset before FW dump */ uint32_t fcp_ring_in_use; /* When polling test if intr-hndlr active*/ struct lpfc_dmabuf slim2p; diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 8d5b6ce..1d7a5c3 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2013 Emulex. All rights reserved. * + * Copyright (C) 2004-2014 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * Portions Copyright (C) 2004-2005 Christoph Hellwig * @@ -919,10 +919,15 @@ lpfc_sli4_pdev_reg_request(struct lpfc_hba *phba, uint32_t opcode) phba->cfg_sriov_nr_virtfn = 0; } + if (opcode == LPFC_FW_DUMP) + phba->hba_flag |= HBA_FW_DUMP_OP; + status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE); - if (status != 0) + if (status != 0) { + phba->hba_flag &= ~HBA_FW_DUMP_OP; return status; + } /* wait for the device to be quiesced before firmware reset */ msleep(100); @@ -2364,7 +2369,7 @@ lpfc_oas_tgt_store(struct device *dev, struct device_attribute *attr, uint8_t wwpn[WWN_SZ]; int rc; - if (!phba->cfg_EnableXLane) + if (!phba->cfg_fof) return -EPERM; /* count may include a LF at end of string */ @@ -2432,7 +2437,7 @@ lpfc_oas_vpt_store(struct device *dev, struct device_attribute *attr, uint8_t wwpn[WWN_SZ]; int rc; - if (!phba->cfg_EnableXLane) + if (!phba->cfg_fof) return -EPERM; /* count may include a LF at end of string */ @@ -2499,7 +2504,7 @@ lpfc_oas_lun_state_store(struct device *dev, struct device_attribute *attr, struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; int val = 0; - if (!phba->cfg_EnableXLane) + if (!phba->cfg_fof) return -EPERM; if (!isdigit(buf[0])) @@ -2565,7 +2570,7 @@ lpfc_oas_lun_state_set(struct lpfc_hba *phba, uint8_t vpt_wwpn[], int rc = 0; - if (!phba->cfg_EnableXLane) + if (!phba->cfg_fof) return -EPERM; if (oas_state) { @@ -2670,7 +2675,7 @@ lpfc_oas_lun_show(struct device *dev, struct device_attribute *attr, uint64_t oas_lun; int len = 0; - if (!phba->cfg_EnableXLane) + if (!phba->cfg_fof) return -EPERM; if (wwn_to_u64(phba->cfg_oas_vpt_wwpn) == 0) @@ -2716,7 +2721,7 @@ lpfc_oas_lun_store(struct device *dev, struct device_attribute *attr, uint64_t scsi_lun; ssize_t rc; - if (!phba->cfg_EnableXLane) + if (!phba->cfg_fof) return -EPERM; if (wwn_to_u64(phba->cfg_oas_vpt_wwpn) == 0) @@ -4655,7 +4660,7 @@ LPFC_ATTR_R(EnableXLane, 0, 0, 1, "Enable Express Lane Feature."); # 0x0 - 0x7f = CS_CTL field in FC header (high 7 bits) # Value range is [0x0,0x7f]. Default value is 0 */ -LPFC_ATTR_R(XLanePriority, 0, 0x0, 0x7f, "CS_CTL for Express Lane Feature."); +LPFC_ATTR_RW(XLanePriority, 0, 0x0, 0x7f, "CS_CTL for Express Lane Feature."); /* # lpfc_enable_bg: Enable BlockGuard (Emulex's Implementation of T10-DIF) diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c index ca2f4ea..5b5c825 100644 --- a/drivers/scsi/lpfc/lpfc_bsg.c +++ b/drivers/scsi/lpfc/lpfc_bsg.c @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2009-2013 Emulex. All rights reserved. * + * Copyright (C) 2009-2014 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * * diff --git a/drivers/scsi/lpfc/lpfc_bsg.h b/drivers/scsi/lpfc/lpfc_bsg.h index a94d4c9..928ef60 100644 --- a/drivers/scsi/lpfc/lpfc_bsg.h +++ b/drivers/scsi/lpfc/lpfc_bsg.h @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2010-2012 Emulex. All rights reserved. * + * Copyright (C) 2010-2014 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * * diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h index adda0bf..db5604f 100644 --- a/drivers/scsi/lpfc/lpfc_crtn.h +++ b/drivers/scsi/lpfc/lpfc_crtn.h @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2013 Emulex. All rights reserved. * + * Copyright (C) 2004-2014 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * * @@ -289,6 +289,7 @@ int lpfc_sli_issue_iocb(struct lpfc_hba *, uint32_t, void lpfc_sli_pcimem_bcopy(void *, void *, uint32_t); void lpfc_sli_bemem_bcopy(void *, void *, uint32_t); void lpfc_sli_abort_iocb_ring(struct lpfc_hba *, struct lpfc_sli_ring *); +void lpfc_sli_abort_fcp_rings(struct lpfc_hba *phba); void lpfc_sli_hba_iocb_abort(struct lpfc_hba *); void lpfc_sli_flush_fcp_rings(struct lpfc_hba *); int lpfc_sli_ringpostbuf_put(struct lpfc_hba *, struct lpfc_sli_ring *, @@ -310,6 +311,9 @@ int lpfc_sli_issue_abort_iotag(struct lpfc_hba *, struct lpfc_sli_ring *, int lpfc_sli_sum_iocb(struct lpfc_vport *, uint16_t, uint64_t, lpfc_ctx_cmd); int lpfc_sli_abort_iocb(struct lpfc_vport *, struct lpfc_sli_ring *, uint16_t, uint64_t, lpfc_ctx_cmd); +int +lpfc_sli_abort_taskmgmt(struct lpfc_vport *, struct lpfc_sli_ring *, + uint16_t, uint64_t, lpfc_ctx_cmd); void lpfc_mbox_timeout(unsigned long); void lpfc_mbox_timeout_handler(struct lpfc_hba *); diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c index 828c08e..b0aedce 100644 --- a/drivers/scsi/lpfc/lpfc_debugfs.c +++ b/drivers/scsi/lpfc/lpfc_debugfs.c @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2007-2012 Emulex. All rights reserved. * + * Copyright (C) 2007-2014 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * * @@ -2314,7 +2314,7 @@ proc_cq: goto too_big; } - if (phba->cfg_EnableXLane) { + if (phba->cfg_fof) { /* OAS CQ */ qp = phba->sli4_hba.oas_cq; diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index 624fe0b..7a5d81a 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2013 Emulex. All rights reserved. * + * Copyright (C) 2004-2014 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * Portions Copyright (C) 2004-2005 Christoph Hellwig * diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index 294c072..2a17e31 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2013 Emulex. All rights reserved. * + * Copyright (C) 2004-2014 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * Portions Copyright (C) 2004-2005 Christoph Hellwig * @@ -5634,6 +5634,9 @@ lpfc_nlp_init(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, ndlp->active_rrqs_xri_bitmap = mempool_alloc(vport->phba->active_rrq_pool, GFP_KERNEL); + if (ndlp->active_rrqs_xri_bitmap) + memset(ndlp->active_rrqs_xri_bitmap, 0, + ndlp->phba->cfg_rrq_xri_bitmap_sz); } diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h index 3d9438c..2362592 100644 --- a/drivers/scsi/lpfc/lpfc_hw.h +++ b/drivers/scsi/lpfc/lpfc_hw.h @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2013 Emulex. All rights reserved. * + * Copyright (C) 2004-2014 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * * diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h index fd79f7d..f432ec1 100644 --- a/drivers/scsi/lpfc/lpfc_hw4.h +++ b/drivers/scsi/lpfc/lpfc_hw4.h @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2009-2013 Emulex. All rights reserved. * + * Copyright (C) 2009-2014 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * * diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 635eeb3..06f9a5b 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2013 Emulex. All rights reserved. * + * Copyright (C) 2004-2014 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * Portions Copyright (C) 2004-2005 Christoph Hellwig * @@ -820,57 +820,153 @@ lpfc_hba_down_prep(struct lpfc_hba *phba) } /** - * lpfc_hba_down_post_s3 - Perform lpfc uninitialization after HBA reset + * lpfc_sli4_free_sp_events - Cleanup sp_queue_events to free + * rspiocb which got deferred + * * @phba: pointer to lpfc HBA data structure. * - * This routine will do uninitialization after the HBA is reset when bring - * down the SLI Layer. + * This routine will cleanup completed slow path events after HBA is reset + * when bringing down the SLI Layer. + * * * Return codes - * 0 - success. - * Any other value - error. + * void. **/ -static int -lpfc_hba_down_post_s3(struct lpfc_hba *phba) +static void +lpfc_sli4_free_sp_events(struct lpfc_hba *phba) +{ + struct lpfc_iocbq *rspiocbq; + struct hbq_dmabuf *dmabuf; + struct lpfc_cq_event *cq_event; + + spin_lock_irq(&phba->hbalock); + phba->hba_flag &= ~HBA_SP_QUEUE_EVT; + spin_unlock_irq(&phba->hbalock); + + while (!list_empty(&phba->sli4_hba.sp_queue_event)) { + /* Get the response iocb from the head of work queue */ + spin_lock_irq(&phba->hbalock); + list_remove_head(&phba->sli4_hba.sp_queue_event, + cq_event, struct lpfc_cq_event, list); + spin_unlock_irq(&phba->hbalock); + + switch (bf_get(lpfc_wcqe_c_code, &cq_event->cqe.wcqe_cmpl)) { + case CQE_CODE_COMPL_WQE: + rspiocbq = container_of(cq_event, struct lpfc_iocbq, + cq_event); + lpfc_sli_release_iocbq(phba, rspiocbq); + break; + case CQE_CODE_RECEIVE: + case CQE_CODE_RECEIVE_V1: + dmabuf = container_of(cq_event, struct hbq_dmabuf, + cq_event); + lpfc_in_buf_free(phba, &dmabuf->dbuf); + } + } +} + +/** + * lpfc_hba_free_post_buf - Perform lpfc uninitialization after HBA reset + * @phba: pointer to lpfc HBA data structure. + * + * This routine will cleanup posted ELS buffers after the HBA is reset + * when bringing down the SLI Layer. + * + * + * Return codes + * void. + **/ +static void +lpfc_hba_free_post_buf(struct lpfc_hba *phba) { struct lpfc_sli *psli = &phba->sli; struct lpfc_sli_ring *pring; struct lpfc_dmabuf *mp, *next_mp; - LIST_HEAD(completions); - int i; + LIST_HEAD(buflist); + int count; if (phba->sli3_options & LPFC_SLI3_HBQ_ENABLED) lpfc_sli_hbqbuf_free_all(phba); else { /* Cleanup preposted buffers on the ELS ring */ pring = &psli->ring[LPFC_ELS_RING]; - list_for_each_entry_safe(mp, next_mp, &pring->postbufq, list) { + spin_lock_irq(&phba->hbalock); + list_splice_init(&pring->postbufq, &buflist); + spin_unlock_irq(&phba->hbalock); + + count = 0; + list_for_each_entry_safe(mp, next_mp, &buflist, list) { list_del(&mp->list); - pring->postbufq_cnt--; + count++; lpfc_mbuf_free(phba, mp->virt, mp->phys); kfree(mp); } + + spin_lock_irq(&phba->hbalock); + pring->postbufq_cnt -= count; + spin_unlock_irq(&phba->hbalock); } +} + +/** + * lpfc_hba_clean_txcmplq - Perform lpfc uninitialization after HBA reset + * @phba: pointer to lpfc HBA data structure. + * + * This routine will cleanup the txcmplq after the HBA is reset when bringing + * down the SLI Layer. + * + * Return codes + * void + **/ +static void +lpfc_hba_clean_txcmplq(struct lpfc_hba *phba) +{ + struct lpfc_sli *psli = &phba->sli; + struct lpfc_sli_ring *pring; + LIST_HEAD(completions); + int i; - spin_lock_irq(&phba->hbalock); for (i = 0; i < psli->num_rings; i++) { pring = &psli->ring[i]; - + if (phba->sli_rev >= LPFC_SLI_REV4) + spin_lock_irq(&pring->ring_lock); + else + spin_lock_irq(&phba->hbalock); /* At this point in time the HBA is either reset or DOA. Either * way, nothing should be on txcmplq as it will NEVER complete. */ list_splice_init(&pring->txcmplq, &completions); - spin_unlock_irq(&phba->hbalock); + pring->txcmplq_cnt = 0; + + if (phba->sli_rev >= LPFC_SLI_REV4) + spin_unlock_irq(&pring->ring_lock); + else + spin_unlock_irq(&phba->hbalock); /* Cancel all the IOCBs from the completions list */ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, IOERR_SLI_ABORTED); - lpfc_sli_abort_iocb_ring(phba, pring); - spin_lock_irq(&phba->hbalock); } - spin_unlock_irq(&phba->hbalock); +} +/** + * lpfc_hba_down_post_s3 - Perform lpfc uninitialization after HBA reset + int i; + * @phba: pointer to lpfc HBA data structure. + * + * This routine will do uninitialization after the HBA is reset when bring + * down the SLI Layer. + * + * Return codes + * 0 - success. + * Any other value - error. + **/ +static int +lpfc_hba_down_post_s3(struct lpfc_hba *phba) +{ + lpfc_hba_free_post_buf(phba); + lpfc_hba_clean_txcmplq(phba); return 0; } @@ -890,13 +986,12 @@ lpfc_hba_down_post_s4(struct lpfc_hba *phba) { struct lpfc_scsi_buf *psb, *psb_next; LIST_HEAD(aborts); - int ret; unsigned long iflag = 0; struct lpfc_sglq *sglq_entry = NULL; - ret = lpfc_hba_down_post_s3(phba); - if (ret) - return ret; + lpfc_hba_free_post_buf(phba); + lpfc_hba_clean_txcmplq(phba); + /* At this point in time the HBA is either reset or DOA. Either * way, nothing should be on lpfc_abts_els_sgl_list, it needs to be * on the lpfc_sgl_list so that it can either be freed if the @@ -932,6 +1027,8 @@ lpfc_hba_down_post_s4(struct lpfc_hba *phba) spin_lock_irqsave(&phba->scsi_buf_list_put_lock, iflag); list_splice(&aborts, &phba->lpfc_scsi_buf_list_put); spin_unlock_irqrestore(&phba->scsi_buf_list_put_lock, iflag); + + lpfc_sli4_free_sp_events(phba); return 0; } @@ -1250,7 +1347,6 @@ static void lpfc_handle_deferred_eratt(struct lpfc_hba *phba) { uint32_t old_host_status = phba->work_hs; - struct lpfc_sli_ring *pring; struct lpfc_sli *psli = &phba->sli; /* If the pci channel is offline, ignore possible errors, @@ -1279,8 +1375,7 @@ lpfc_handle_deferred_eratt(struct lpfc_hba *phba) * dropped by the firmware. Error iocb (I/O) on txcmplq and let the * SCSI layer retry it after re-establishing link. */ - pring = &psli->ring[psli->fcp_ring]; - lpfc_sli_abort_iocb_ring(phba, pring); + lpfc_sli_abort_fcp_rings(phba); /* * There was a firmware error. Take the hba offline and then @@ -1348,7 +1443,6 @@ lpfc_handle_eratt_s3(struct lpfc_hba *phba) { struct lpfc_vport *vport = phba->pport; struct lpfc_sli *psli = &phba->sli; - struct lpfc_sli_ring *pring; uint32_t event_data; unsigned long temperature; struct temp_event temp_event_data; @@ -1400,8 +1494,7 @@ lpfc_handle_eratt_s3(struct lpfc_hba *phba) * Error iocb (I/O) on txcmplq and let the SCSI layer * retry it after re-establishing link. */ - pring = &psli->ring[psli->fcp_ring]; - lpfc_sli_abort_iocb_ring(phba, pring); + lpfc_sli_abort_fcp_rings(phba); /* * There was a firmware error. Take the hba offline and then @@ -1940,78 +2033,81 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp) switch (dev_id) { case PCI_DEVICE_ID_FIREFLY: - m = (typeof(m)){"LP6000", "PCI", "Fibre Channel Adapter"}; + m = (typeof(m)){"LP6000", "PCI", + "Obsolete, Unsupported Fibre Channel Adapter"}; break; case PCI_DEVICE_ID_SUPERFLY: if (vp->rev.biuRev >= 1 && vp->rev.biuRev <= 3) - m = (typeof(m)){"LP7000", "PCI", - "Fibre Channel Adapter"}; + m = (typeof(m)){"LP7000", "PCI", ""}; else - m = (typeof(m)){"LP7000E", "PCI", - "Fibre Channel Adapter"}; + m = (typeof(m)){"LP7000E", "PCI", ""}; + m.function = "Obsolete, Unsupported Fibre Channel Adapter"; break; case PCI_DEVICE_ID_DRAGONFLY: m = (typeof(m)){"LP8000", "PCI", - "Fibre Channel Adapter"}; + "Obsolete, Unsupported Fibre Channel Adapter"}; break; case PCI_DEVICE_ID_CENTAUR: if (FC_JEDEC_ID(vp->rev.biuRev) == CENTAUR_2G_JEDEC_ID) - m = (typeof(m)){"LP9002", "PCI", - "Fibre Channel Adapter"}; + m = (typeof(m)){"LP9002", "PCI", ""}; else - m = (typeof(m)){"LP9000", "PCI", - "Fibre Channel Adapter"}; + m = (typeof(m)){"LP9000", "PCI", ""}; + m.function = "Obsolete, Unsupported Fibre Channel Adapter"; break; case PCI_DEVICE_ID_RFLY: m = (typeof(m)){"LP952", "PCI", - "Fibre Channel Adapter"}; + "Obsolete, Unsupported Fibre Channel Adapter"}; break; case PCI_DEVICE_ID_PEGASUS: m = (typeof(m)){"LP9802", "PCI-X", - "Fibre Channel Adapter"}; + "Obsolete, Unsupported Fibre Channel Adapter"}; break; case PCI_DEVICE_ID_THOR: m = (typeof(m)){"LP10000", "PCI-X", - "Fibre Channel Adapter"}; + "Obsolete, Unsupported Fibre Channel Adapter"}; break; case PCI_DEVICE_ID_VIPER: m = (typeof(m)){"LPX1000", "PCI-X", - "Fibre Channel Adapter"}; + "Obsolete, Unsupported Fibre Channel Adapter"}; break; case PCI_DEVICE_ID_PFLY: m = (typeof(m)){"LP982", "PCI-X", - "Fibre Channel Adapter"}; + "Obsolete, Unsupported Fibre Channel Adapter"}; break; case PCI_DEVICE_ID_TFLY: m = (typeof(m)){"LP1050", "PCI-X", - "Fibre Channel Adapter"}; + "Obsolete, Unsupported Fibre Channel Adapter"}; break; case PCI_DEVICE_ID_HELIOS: m = (typeof(m)){"LP11000", "PCI-X2", - "Fibre Channel Adapter"}; + "Obsolete, Unsupported Fibre Channel Adapter"}; break; case PCI_DEVICE_ID_HELIOS_SCSP: m = (typeof(m)){"LP11000-SP", "PCI-X2", - "Fibre Channel Adapter"}; + "Obsolete, Unsupported Fibre Channel Adapter"}; break; case PCI_DEVICE_ID_HELIOS_DCSP: m = (typeof(m)){"LP11002-SP", "PCI-X2", - "Fibre Channel Adapter"}; + "Obsolete, Unsupported Fibre Channel Adapter"}; break; case PCI_DEVICE_ID_NEPTUNE: - m = (typeof(m)){"LPe1000", "PCIe", "Fibre Channel Adapter"}; + m = (typeof(m)){"LPe1000", "PCIe", + "Obsolete, Unsupported Fibre Channel Adapter"}; break; case PCI_DEVICE_ID_NEPTUNE_SCSP: - m = (typeof(m)){"LPe1000-SP", "PCIe", "Fibre Channel Adapter"}; + m = (typeof(m)){"LPe1000-SP", "PCIe", + "Obsolete, Unsupported Fibre Channel Adapter"}; break; case PCI_DEVICE_ID_NEPTUNE_DCSP: - m = (typeof(m)){"LPe1002-SP", "PCIe", "Fibre Channel Adapter"}; + m = (typeof(m)){"LPe1002-SP", "PCIe", + "Obsolete, Unsupported Fibre Channel Adapter"}; break; case PCI_DEVICE_ID_BMID: m = (typeof(m)){"LP1150", "PCI-X2", "Fibre Channel Adapter"}; break; case PCI_DEVICE_ID_BSMB: - m = (typeof(m)){"LP111", "PCI-X2", "Fibre Channel Adapter"}; + m = (typeof(m)){"LP111", "PCI-X2", + "Obsolete, Unsupported Fibre Channel Adapter"}; break; case PCI_DEVICE_ID_ZEPHYR: m = (typeof(m)){"LPe11000", "PCIe", "Fibre Channel Adapter"}; @@ -2030,16 +2126,20 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp) m = (typeof(m)){"LPe111", "PCIe", "Fibre Channel Adapter"}; break; case PCI_DEVICE_ID_LP101: - m = (typeof(m)){"LP101", "PCI-X", "Fibre Channel Adapter"}; + m = (typeof(m)){"LP101", "PCI-X", + "Obsolete, Unsupported Fibre Channel Adapter"}; break; case PCI_DEVICE_ID_LP10000S: - m = (typeof(m)){"LP10000-S", "PCI", "Fibre Channel Adapter"}; + m = (typeof(m)){"LP10000-S", "PCI", + "Obsolete, Unsupported Fibre Channel Adapter"}; break; case PCI_DEVICE_ID_LP11000S: - m = (typeof(m)){"LP11000-S", "PCI-X2", "Fibre Channel Adapter"}; + m = (typeof(m)){"LP11000-S", "PCI-X2", + "Obsolete, Unsupported Fibre Channel Adapter"}; break; case PCI_DEVICE_ID_LPE11000S: - m = (typeof(m)){"LPe11000-S", "PCIe", "Fibre Channel Adapter"}; + m = (typeof(m)){"LPe11000-S", "PCIe", + "Obsolete, Unsupported Fibre Channel Adapter"}; break; case PCI_DEVICE_ID_SAT: m = (typeof(m)){"LPe12000", "PCIe", "Fibre Channel Adapter"}; @@ -2060,20 +2160,21 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp) m = (typeof(m)){"LPe12000-S", "PCIe", "Fibre Channel Adapter"}; break; case PCI_DEVICE_ID_HORNET: - m = (typeof(m)){"LP21000", "PCIe", "FCoE Adapter"}; + m = (typeof(m)){"LP21000", "PCIe", + "Obsolete, Unsupported FCoE Adapter"}; GE = 1; break; case PCI_DEVICE_ID_PROTEUS_VF: m = (typeof(m)){"LPev12000", "PCIe IOV", - "Fibre Channel Adapter"}; + "Obsolete, Unsupported Fibre Channel Adapter"}; break; case PCI_DEVICE_ID_PROTEUS_PF: m = (typeof(m)){"LPev12000", "PCIe IOV", - "Fibre Channel Adapter"}; + "Obsolete, Unsupported Fibre Channel Adapter"}; break; case PCI_DEVICE_ID_PROTEUS_S: m = (typeof(m)){"LPemv12002-S", "PCIe IOV", - "Fibre Channel Adapter"}; + "Obsolete, Unsupported Fibre Channel Adapter"}; break; case PCI_DEVICE_ID_TIGERSHARK: oneConnect = 1; @@ -2089,17 +2190,24 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp) break; case PCI_DEVICE_ID_BALIUS: m = (typeof(m)){"LPVe12002", "PCIe Shared I/O", - "Fibre Channel Adapter"}; + "Obsolete, Unsupported Fibre Channel Adapter"}; break; case PCI_DEVICE_ID_LANCER_FC: - case PCI_DEVICE_ID_LANCER_FC_VF: m = (typeof(m)){"LPe16000", "PCIe", "Fibre Channel Adapter"}; break; + case PCI_DEVICE_ID_LANCER_FC_VF: + m = (typeof(m)){"LPe16000", "PCIe", + "Obsolete, Unsupported Fibre Channel Adapter"}; + break; case PCI_DEVICE_ID_LANCER_FCOE: - case PCI_DEVICE_ID_LANCER_FCOE_VF: oneConnect = 1; m = (typeof(m)){"OCe15100", "PCIe", "FCoE"}; break; + case PCI_DEVICE_ID_LANCER_FCOE_VF: + oneConnect = 1; + m = (typeof(m)){"OCe15100", "PCIe", + "Obsolete, Unsupported FCoE"}; + break; case PCI_DEVICE_ID_SKYHAWK: case PCI_DEVICE_ID_SKYHAWK_VF: oneConnect = 1; @@ -4614,7 +4722,10 @@ lpfc_reset_hba(struct lpfc_hba *phba) phba->link_state = LPFC_HBA_ERROR; return; } - lpfc_offline_prep(phba, LPFC_MBX_WAIT); + if (phba->sli.sli_flag & LPFC_SLI_ACTIVE) + lpfc_offline_prep(phba, LPFC_MBX_WAIT); + else + lpfc_offline_prep(phba, LPFC_MBX_NO_WAIT); lpfc_offline(phba); lpfc_sli_brdrestart(phba); lpfc_online(phba); @@ -9663,9 +9774,6 @@ lpfc_pci_resume_one_s3(struct pci_dev *pdev) static void lpfc_sli_prep_dev_for_recover(struct lpfc_hba *phba) { - struct lpfc_sli *psli = &phba->sli; - struct lpfc_sli_ring *pring; - lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "2723 PCI channel I/O abort preparing for recovery\n"); @@ -9673,8 +9781,7 @@ lpfc_sli_prep_dev_for_recover(struct lpfc_hba *phba) * There may be errored I/Os through HBA, abort all I/Os on txcmplq * and let the SCSI mid-layer to retry them to recover. */ - pring = &psli->ring[psli->fcp_ring]; - lpfc_sli_abort_iocb_ring(phba, pring); + lpfc_sli_abort_fcp_rings(phba); } /** @@ -10417,17 +10524,13 @@ lpfc_pci_resume_one_s4(struct pci_dev *pdev) static void lpfc_sli4_prep_dev_for_recover(struct lpfc_hba *phba) { - struct lpfc_sli *psli = &phba->sli; - struct lpfc_sli_ring *pring; - lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "2828 PCI channel I/O abort preparing for recovery\n"); /* * There may be errored I/Os through HBA, abort all I/Os on txcmplq * and let the SCSI mid-layer to retry them to recover. */ - pring = &psli->ring[psli->fcp_ring]; - lpfc_sli_abort_iocb_ring(phba, pring); + lpfc_sli_abort_fcp_rings(phba); } /** @@ -10898,7 +11001,7 @@ lpfc_sli4_oas_verify(struct lpfc_hba *phba) if (phba->sli4_hba.pc_sli4_params.oas_supported) { phba->cfg_fof = 1; } else { - phba->cfg_EnableXLane = 0; + phba->cfg_fof = 0; if (phba->device_data_mem_pool) mempool_destroy(phba->device_data_mem_pool); phba->device_data_mem_pool = NULL; @@ -10928,7 +11031,7 @@ lpfc_fof_queue_setup(struct lpfc_hba *phba) if (rc) return -ENOMEM; - if (phba->cfg_EnableXLane) { + if (phba->cfg_fof) { rc = lpfc_cq_create(phba, phba->sli4_hba.oas_cq, phba->sli4_hba.fof_eq, LPFC_WCQ, LPFC_FCP); @@ -10947,8 +11050,7 @@ lpfc_fof_queue_setup(struct lpfc_hba *phba) return 0; out_oas_wq: - if (phba->cfg_EnableXLane) - lpfc_cq_destroy(phba, phba->sli4_hba.oas_cq); + lpfc_cq_destroy(phba, phba->sli4_hba.oas_cq); out_oas_cq: lpfc_eq_destroy(phba, phba->sli4_hba.fof_eq); return rc; @@ -10982,7 +11084,7 @@ lpfc_fof_queue_create(struct lpfc_hba *phba) phba->sli4_hba.fof_eq = qdesc; - if (phba->cfg_EnableXLane) { + if (phba->cfg_fof) { /* Create OAS CQ */ qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize, diff --git a/drivers/scsi/lpfc/lpfc_mem.c b/drivers/scsi/lpfc/lpfc_mem.c index ed419aa..3fa6533 100644 --- a/drivers/scsi/lpfc/lpfc_mem.c +++ b/drivers/scsi/lpfc/lpfc_mem.c @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2012 Emulex. All rights reserved. * + * Copyright (C) 2004-2014 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * Portions Copyright (C) 2004-2005 Christoph Hellwig * diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index 462453e..2df11da 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2013 Emulex. All rights reserved. * + * Copyright (C) 2004-2014 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * Portions Copyright (C) 2004-2005 Christoph Hellwig * @@ -73,7 +73,7 @@ lpfc_rport_data_from_scsi_device(struct scsi_device *sdev) { struct lpfc_vport *vport = (struct lpfc_vport *)sdev->host->hostdata; - if (vport->phba->cfg_EnableXLane) + if (vport->phba->cfg_fof) return ((struct lpfc_device_data *)sdev->hostdata)->rport_data; else return (struct lpfc_rport_data *)sdev->hostdata; @@ -3462,7 +3462,7 @@ lpfc_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) * If the OAS driver feature is enabled and the lun is enabled for * OAS, set the oas iocb related flags. */ - if ((phba->cfg_EnableXLane) && ((struct lpfc_device_data *) + if ((phba->cfg_fof) && ((struct lpfc_device_data *) scsi_cmnd->device->hostdata)->oas_enabled) lpfc_cmd->cur_iocbq.iocb_flag |= LPFC_IO_OAS; return 0; @@ -4314,6 +4314,7 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd, fcp_cmnd->fcpCntl1 = SIMPLE_Q; sli4 = (phba->sli_rev == LPFC_SLI_REV4); + piocbq->iocb.un.fcpi.fcpi_XRdy = 0; /* * There are three possibilities here - use scatter-gather segment, use @@ -4782,7 +4783,9 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd) struct lpfc_scsi_buf *lpfc_cmd; IOCB_t *cmd, *icmd; int ret = SUCCESS, status = 0; - unsigned long flags; + struct lpfc_sli_ring *pring_s4; + int ring_number, ret_val; + unsigned long flags, iflags; DECLARE_WAIT_QUEUE_HEAD_ONSTACK(waitq); status = fc_block_scsi_eh(cmnd); @@ -4833,6 +4836,14 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd) BUG_ON(iocb->context1 != lpfc_cmd); + /* abort issued in recovery is still in progress */ + if (iocb->iocb_flag & LPFC_DRIVER_ABORTED) { + lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP, + "3389 SCSI Layer I/O Abort Request is pending\n"); + spin_unlock_irqrestore(&phba->hbalock, flags); + goto wait_for_cmpl; + } + abtsiocb = __lpfc_sli_get_iocbq(phba); if (abtsiocb == NULL) { ret = FAILED; @@ -4871,11 +4882,23 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd) abtsiocb->iocb_cmpl = lpfc_sli_abort_fcp_cmpl; abtsiocb->vport = vport; + if (phba->sli_rev == LPFC_SLI_REV4) { + ring_number = MAX_SLI3_CONFIGURED_RINGS + iocb->fcp_wqidx; + pring_s4 = &phba->sli.ring[ring_number]; + /* Note: both hbalock and ring_lock must be set here */ + spin_lock_irqsave(&pring_s4->ring_lock, iflags); + ret_val = __lpfc_sli_issue_iocb(phba, pring_s4->ringno, + abtsiocb, 0); + spin_unlock_irqrestore(&pring_s4->ring_lock, iflags); + } else { + ret_val = __lpfc_sli_issue_iocb(phba, LPFC_FCP_RING, + abtsiocb, 0); + } /* no longer need the lock after this point */ spin_unlock_irqrestore(&phba->hbalock, flags); - if (lpfc_sli_issue_iocb(phba, LPFC_FCP_RING, abtsiocb, 0) == - IOCB_ERROR) { + + if (ret_val == IOCB_ERROR) { lpfc_sli_release_iocbq(phba, abtsiocb); ret = FAILED; goto out; @@ -4885,12 +4908,16 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd) lpfc_sli_handle_fast_ring_event(phba, &phba->sli.ring[LPFC_FCP_RING], HA_R0RE_REQ); +wait_for_cmpl: lpfc_cmd->waitq = &waitq; /* Wait for abort to complete */ wait_event_timeout(waitq, (lpfc_cmd->pCmd != cmnd), msecs_to_jiffies(2*vport->cfg_devloss_tmo*1000)); + + spin_lock_irqsave(shost->host_lock, flags); lpfc_cmd->waitq = NULL; + spin_unlock_irqrestore(shost->host_lock, flags); if (lpfc_cmd->pCmd == cmnd) { ret = FAILED; @@ -5172,8 +5199,9 @@ lpfc_reset_flush_io_context(struct lpfc_vport *vport, uint16_t tgt_id, cnt = lpfc_sli_sum_iocb(vport, tgt_id, lun_id, context); if (cnt) - lpfc_sli_abort_iocb(vport, &phba->sli.ring[phba->sli.fcp_ring], - tgt_id, lun_id, context); + lpfc_sli_abort_taskmgmt(vport, + &phba->sli.ring[phba->sli.fcp_ring], + tgt_id, lun_id, context); later = msecs_to_jiffies(2 * vport->cfg_devloss_tmo * 1000) + jiffies; while (time_after(later, jiffies) && cnt) { schedule_timeout_uninterruptible(msecs_to_jiffies(20)); @@ -5491,7 +5519,7 @@ lpfc_slave_alloc(struct scsi_device *sdev) if (!rport || fc_remote_port_chkready(rport)) return -ENXIO; - if (phba->cfg_EnableXLane) { + if (phba->cfg_fof) { /* * Check to see if the device data structure for the lun @@ -5616,7 +5644,7 @@ lpfc_slave_destroy(struct scsi_device *sdev) struct lpfc_device_data *device_data = sdev->hostdata; atomic_dec(&phba->sdev_cnt); - if ((phba->cfg_EnableXLane) && (device_data)) { + if ((phba->cfg_fof) && (device_data)) { spin_lock_irqsave(&phba->devicelock, flags); device_data->available = false; if (!device_data->oas_enabled) @@ -5655,7 +5683,7 @@ lpfc_create_device_data(struct lpfc_hba *phba, struct lpfc_name *vport_wwpn, int memory_flags; if (unlikely(!phba) || !vport_wwpn || !target_wwpn || - !(phba->cfg_EnableXLane)) + !(phba->cfg_fof)) return NULL; /* Attempt to create the device data to contain lun info */ @@ -5693,7 +5721,7 @@ lpfc_delete_device_data(struct lpfc_hba *phba, { if (unlikely(!phba) || !lun_info || - !(phba->cfg_EnableXLane)) + !(phba->cfg_fof)) return; if (!list_empty(&lun_info->listentry)) @@ -5727,7 +5755,7 @@ __lpfc_get_device_data(struct lpfc_hba *phba, struct list_head *list, struct lpfc_device_data *lun_info; if (unlikely(!phba) || !list || !vport_wwpn || !target_wwpn || - !phba->cfg_EnableXLane) + !phba->cfg_fof) return NULL; /* Check to see if the lun is already enabled for OAS. */ @@ -5789,7 +5817,7 @@ lpfc_find_next_oas_lun(struct lpfc_hba *phba, struct lpfc_name *vport_wwpn, !starting_lun || !found_vport_wwpn || !found_target_wwpn || !found_lun || !found_lun_status || (*starting_lun == NO_MORE_OAS_LUN) || - !phba->cfg_EnableXLane) + !phba->cfg_fof) return false; lun = *starting_lun; @@ -5873,7 +5901,7 @@ lpfc_enable_oas_lun(struct lpfc_hba *phba, struct lpfc_name *vport_wwpn, unsigned long flags; if (unlikely(!phba) || !vport_wwpn || !target_wwpn || - !phba->cfg_EnableXLane) + !phba->cfg_fof) return false; spin_lock_irqsave(&phba->devicelock, flags); @@ -5930,7 +5958,7 @@ lpfc_disable_oas_lun(struct lpfc_hba *phba, struct lpfc_name *vport_wwpn, unsigned long flags; if (unlikely(!phba) || !vport_wwpn || !target_wwpn || - !phba->cfg_EnableXLane) + !phba->cfg_fof) return false; spin_lock_irqsave(&phba->devicelock, flags); diff --git a/drivers/scsi/lpfc/lpfc_scsi.h b/drivers/scsi/lpfc/lpfc_scsi.h index 0120bfc..0389ac1 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.h +++ b/drivers/scsi/lpfc/lpfc_scsi.h @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2013 Emulex. All rights reserved. * + * Copyright (C) 2004-2014 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * * diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 393662c..32ada05 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2013 Emulex. All rights reserved. * + * Copyright (C) 2004-2014 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * Portions Copyright (C) 2004-2005 Christoph Hellwig * @@ -3532,14 +3532,27 @@ lpfc_sli_abort_iocb_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) /* Error everything on txq and txcmplq * First do the txq. */ - spin_lock_irq(&phba->hbalock); - list_splice_init(&pring->txq, &completions); + if (phba->sli_rev >= LPFC_SLI_REV4) { + spin_lock_irq(&pring->ring_lock); + list_splice_init(&pring->txq, &completions); + pring->txq_cnt = 0; + spin_unlock_irq(&pring->ring_lock); - /* Next issue ABTS for everything on the txcmplq */ - list_for_each_entry_safe(iocb, next_iocb, &pring->txcmplq, list) - lpfc_sli_issue_abort_iotag(phba, pring, iocb); + spin_lock_irq(&phba->hbalock); + /* Next issue ABTS for everything on the txcmplq */ + list_for_each_entry_safe(iocb, next_iocb, &pring->txcmplq, list) + lpfc_sli_issue_abort_iotag(phba, pring, iocb); + spin_unlock_irq(&phba->hbalock); + } else { + spin_lock_irq(&phba->hbalock); + list_splice_init(&pring->txq, &completions); + pring->txq_cnt = 0; - spin_unlock_irq(&phba->hbalock); + /* Next issue ABTS for everything on the txcmplq */ + list_for_each_entry_safe(iocb, next_iocb, &pring->txcmplq, list) + lpfc_sli_issue_abort_iotag(phba, pring, iocb); + spin_unlock_irq(&phba->hbalock); + } /* Cancel all the IOCBs from the completions list */ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, @@ -3547,6 +3560,36 @@ lpfc_sli_abort_iocb_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) } /** + * lpfc_sli_abort_fcp_rings - Abort all iocbs in all FCP rings + * @phba: Pointer to HBA context object. + * @pring: Pointer to driver SLI ring object. + * + * This function aborts all iocbs in FCP rings and frees all the iocb + * objects in txq. This function issues an abort iocb for all the iocb commands + * in txcmplq. The iocbs in the txcmplq is not guaranteed to complete before + * the return of this function. The caller is not required to hold any locks. + **/ +void +lpfc_sli_abort_fcp_rings(struct lpfc_hba *phba) +{ + struct lpfc_sli *psli = &phba->sli; + struct lpfc_sli_ring *pring; + uint32_t i; + + /* Look on all the FCP Rings for the iotag */ + if (phba->sli_rev >= LPFC_SLI_REV4) { + for (i = 0; i < phba->cfg_fcp_io_channel; i++) { + pring = &psli->ring[i + MAX_SLI3_CONFIGURED_RINGS]; + lpfc_sli_abort_iocb_ring(phba, pring); + } + } else { + pring = &psli->ring[psli->fcp_ring]; + lpfc_sli_abort_iocb_ring(phba, pring); + } +} + + +/** * lpfc_sli_flush_fcp_rings - flush all iocbs in the fcp ring * @phba: Pointer to HBA context object. * @@ -3563,28 +3606,55 @@ lpfc_sli_flush_fcp_rings(struct lpfc_hba *phba) LIST_HEAD(txcmplq); struct lpfc_sli *psli = &phba->sli; struct lpfc_sli_ring *pring; - - /* Currently, only one fcp ring */ - pring = &psli->ring[psli->fcp_ring]; + uint32_t i; spin_lock_irq(&phba->hbalock); - /* Retrieve everything on txq */ - list_splice_init(&pring->txq, &txq); - - /* Retrieve everything on the txcmplq */ - list_splice_init(&pring->txcmplq, &txcmplq); - /* Indicate the I/O queues are flushed */ phba->hba_flag |= HBA_FCP_IOQ_FLUSH; spin_unlock_irq(&phba->hbalock); - /* Flush the txq */ - lpfc_sli_cancel_iocbs(phba, &txq, IOSTAT_LOCAL_REJECT, - IOERR_SLI_DOWN); + /* Look on all the FCP Rings for the iotag */ + if (phba->sli_rev >= LPFC_SLI_REV4) { + for (i = 0; i < phba->cfg_fcp_io_channel; i++) { + pring = &psli->ring[i + MAX_SLI3_CONFIGURED_RINGS]; + + spin_lock_irq(&pring->ring_lock); + /* Retrieve everything on txq */ + list_splice_init(&pring->txq, &txq); + /* Retrieve everything on the txcmplq */ + list_splice_init(&pring->txcmplq, &txcmplq); + pring->txq_cnt = 0; + pring->txcmplq_cnt = 0; + spin_unlock_irq(&pring->ring_lock); + + /* Flush the txq */ + lpfc_sli_cancel_iocbs(phba, &txq, + IOSTAT_LOCAL_REJECT, + IOERR_SLI_DOWN); + /* Flush the txcmpq */ + lpfc_sli_cancel_iocbs(phba, &txcmplq, + IOSTAT_LOCAL_REJECT, + IOERR_SLI_DOWN); + } + } else { + pring = &psli->ring[psli->fcp_ring]; - /* Flush the txcmpq */ - lpfc_sli_cancel_iocbs(phba, &txcmplq, IOSTAT_LOCAL_REJECT, - IOERR_SLI_DOWN); + spin_lock_irq(&phba->hbalock); + /* Retrieve everything on txq */ + list_splice_init(&pring->txq, &txq); + /* Retrieve everything on the txcmplq */ + list_splice_init(&pring->txcmplq, &txcmplq); + pring->txq_cnt = 0; + pring->txcmplq_cnt = 0; + spin_unlock_irq(&phba->hbalock); + + /* Flush the txq */ + lpfc_sli_cancel_iocbs(phba, &txq, IOSTAT_LOCAL_REJECT, + IOERR_SLI_DOWN); + /* Flush the txcmpq */ + lpfc_sli_cancel_iocbs(phba, &txcmplq, IOSTAT_LOCAL_REJECT, + IOERR_SLI_DOWN); + } } /** @@ -3987,12 +4057,13 @@ lpfc_sli4_brdreset(struct lpfc_hba *phba) { struct lpfc_sli *psli = &phba->sli; uint16_t cfg_value; - int rc; + int rc = 0; /* Reset HBA */ lpfc_printf_log(phba, KERN_INFO, LOG_SLI, - "0295 Reset HBA Data: x%x x%x\n", - phba->pport->port_state, psli->sli_flag); + "0295 Reset HBA Data: x%x x%x x%x\n", + phba->pport->port_state, psli->sli_flag, + phba->hba_flag); /* perform board reset */ phba->fc_eventTag = 0; @@ -4005,6 +4076,12 @@ lpfc_sli4_brdreset(struct lpfc_hba *phba) phba->fcf.fcf_flag = 0; spin_unlock_irq(&phba->hbalock); + /* SLI4 INTF 2: if FW dump is being taken skip INIT_PORT */ + if (phba->hba_flag & HBA_FW_DUMP_OP) { + phba->hba_flag &= ~HBA_FW_DUMP_OP; + return rc; + } + /* Now physically reset the device */ lpfc_printf_log(phba, KERN_INFO, LOG_INIT, "0389 Performing PCI function reset!\n"); @@ -5002,7 +5079,7 @@ lpfc_sli4_arm_cqeq_intr(struct lpfc_hba *phba) } while (++fcp_eqidx < phba->cfg_fcp_io_channel); } - if (phba->cfg_EnableXLane) + if (phba->cfg_fof) lpfc_sli4_cq_release(phba->sli4_hba.oas_cq, LPFC_QUEUE_REARM); if (phba->sli4_hba.hba_eq) { @@ -6722,7 +6799,6 @@ lpfc_mbox_timeout_handler(struct lpfc_hba *phba) LPFC_MBOXQ_t *pmbox = phba->sli.mbox_active; MAILBOX_t *mb = &pmbox->u.mb; struct lpfc_sli *psli = &phba->sli; - struct lpfc_sli_ring *pring; /* If the mailbox completed, process the completion and return */ if (lpfc_sli4_process_missed_mbox_completions(phba)) @@ -6764,8 +6840,7 @@ lpfc_mbox_timeout_handler(struct lpfc_hba *phba) psli->sli_flag &= ~LPFC_SLI_ACTIVE; spin_unlock_irq(&phba->hbalock); - pring = &psli->ring[psli->fcp_ring]; - lpfc_sli_abort_iocb_ring(phba, pring); + lpfc_sli_abort_fcp_rings(phba); lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI, "0345 Resetting board due to mailbox timeout\n"); @@ -8133,6 +8208,7 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq, abort_tag = (uint32_t) iocbq->iotag; xritag = iocbq->sli4_xritag; wqe->generic.wqe_com.word7 = 0; /* The ct field has moved so reset */ + wqe->generic.wqe_com.word10 = 0; /* words0-2 bpl convert bde */ if (iocbq->iocb.un.genreq64.bdl.bdeFlags == BUFF_TYPE_BLP_64) { numBdes = iocbq->iocb.un.genreq64.bdl.bdeSize / @@ -8639,8 +8715,7 @@ __lpfc_sli_issue_iocb_s4(struct lpfc_hba *phba, uint32_t ring_number, if ((piocb->iocb_flag & LPFC_IO_FCP) || (piocb->iocb_flag & LPFC_USE_FCPWQIDX)) { - if (!phba->cfg_EnableXLane || (!(piocb->iocb_flag & - LPFC_IO_OAS))) { + if (!phba->cfg_fof || (!(piocb->iocb_flag & LPFC_IO_OAS))) { wq = phba->sli4_hba.fcp_wq[piocb->fcp_wqidx]; } else { wq = phba->sli4_hba.oas_wq; @@ -8735,7 +8810,7 @@ lpfc_sli_issue_iocb(struct lpfc_hba *phba, uint32_t ring_number, if (phba->sli_rev == LPFC_SLI_REV4) { if (piocb->iocb_flag & LPFC_IO_FCP) { - if (!phba->cfg_EnableXLane || (!(piocb->iocb_flag & + if (!phba->cfg_fof || (!(piocb->iocb_flag & LPFC_IO_OAS))) { if (unlikely(!phba->sli4_hba.fcp_wq)) return IOCB_ERROR; @@ -9170,6 +9245,7 @@ lpfc_sli_queue_setup(struct lpfc_hba *phba) pring->sli.sli3.next_cmdidx = 0; pring->sli.sli3.local_getidx = 0; pring->sli.sli3.cmdidx = 0; + pring->flag = 0; INIT_LIST_HEAD(&pring->txq); INIT_LIST_HEAD(&pring->txcmplq); INIT_LIST_HEAD(&pring->iocb_continueq); @@ -9805,43 +9881,6 @@ abort_iotag_exit: } /** - * lpfc_sli_iocb_ring_abort - Unconditionally abort all iocbs on an iocb ring - * @phba: Pointer to HBA context object. - * @pring: Pointer to driver SLI ring object. - * - * This function aborts all iocbs in the given ring and frees all the iocb - * objects in txq. This function issues abort iocbs unconditionally for all - * the iocb commands in txcmplq. The iocbs in the txcmplq is not guaranteed - * to complete before the return of this function. The caller is not required - * to hold any locks. - **/ -static void -lpfc_sli_iocb_ring_abort(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) -{ - LIST_HEAD(completions); - struct lpfc_iocbq *iocb, *next_iocb; - - if (pring->ringno == LPFC_ELS_RING) - lpfc_fabric_abort_hba(phba); - - spin_lock_irq(&phba->hbalock); - - /* Take off all the iocbs on txq for cancelling */ - list_splice_init(&pring->txq, &completions); - pring->txq_cnt = 0; - - /* Next issue ABTS for everything on the txcmplq */ - list_for_each_entry_safe(iocb, next_iocb, &pring->txcmplq, list) - lpfc_sli_abort_iotag_issue(phba, pring, iocb); - - spin_unlock_irq(&phba->hbalock); - - /* Cancel all the IOCBs from the completions list */ - lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, - IOERR_SLI_ABORTED); -} - -/** * lpfc_sli_hba_iocb_abort - Abort all iocbs to an hba. * @phba: pointer to lpfc HBA data structure. * @@ -9856,7 +9895,7 @@ lpfc_sli_hba_iocb_abort(struct lpfc_hba *phba) for (i = 0; i < psli->num_rings; i++) { pring = &psli->ring[i]; - lpfc_sli_iocb_ring_abort(phba, pring); + lpfc_sli_abort_iocb_ring(phba, pring); } } @@ -10081,6 +10120,124 @@ lpfc_sli_abort_iocb(struct lpfc_vport *vport, struct lpfc_sli_ring *pring, } /** + * lpfc_sli_abort_taskmgmt - issue abort for all commands on a host/target/LUN + * @vport: Pointer to virtual port. + * @pring: Pointer to driver SLI ring object. + * @tgt_id: SCSI ID of the target. + * @lun_id: LUN ID of the scsi device. + * @taskmgmt_cmd: LPFC_CTX_LUN/LPFC_CTX_TGT/LPFC_CTX_HOST. + * + * This function sends an abort command for every SCSI command + * associated with the given virtual port pending on the ring + * filtered by lpfc_sli_validate_fcp_iocb function. + * When taskmgmt_cmd == LPFC_CTX_LUN, the function sends abort only to the + * FCP iocbs associated with lun specified by tgt_id and lun_id + * parameters + * When taskmgmt_cmd == LPFC_CTX_TGT, the function sends abort only to the + * FCP iocbs associated with SCSI target specified by tgt_id parameter. + * When taskmgmt_cmd == LPFC_CTX_HOST, the function sends abort to all + * FCP iocbs associated with virtual port. + * This function returns number of iocbs it aborted . + * This function is called with no locks held right after a taskmgmt + * command is sent. + **/ +int +lpfc_sli_abort_taskmgmt(struct lpfc_vport *vport, struct lpfc_sli_ring *pring, + uint16_t tgt_id, uint64_t lun_id, lpfc_ctx_cmd cmd) +{ + struct lpfc_hba *phba = vport->phba; + struct lpfc_iocbq *abtsiocbq; + struct lpfc_iocbq *iocbq; + IOCB_t *icmd; + int sum, i, ret_val; + unsigned long iflags; + struct lpfc_sli_ring *pring_s4; + uint32_t ring_number; + + spin_lock_irq(&phba->hbalock); + + /* all I/Os are in process of being flushed */ + if (phba->hba_flag & HBA_FCP_IOQ_FLUSH) { + spin_unlock_irq(&phba->hbalock); + return 0; + } + sum = 0; + + for (i = 1; i <= phba->sli.last_iotag; i++) { + iocbq = phba->sli.iocbq_lookup[i]; + + if (lpfc_sli_validate_fcp_iocb(iocbq, vport, tgt_id, lun_id, + cmd) != 0) + continue; + + /* + * If the iocbq is already being aborted, don't take a second + * action, but do count it. + */ + if (iocbq->iocb_flag & LPFC_DRIVER_ABORTED) + continue; + + /* issue ABTS for this IOCB based on iotag */ + abtsiocbq = __lpfc_sli_get_iocbq(phba); + if (abtsiocbq == NULL) + continue; + + icmd = &iocbq->iocb; + abtsiocbq->iocb.un.acxri.abortType = ABORT_TYPE_ABTS; + abtsiocbq->iocb.un.acxri.abortContextTag = icmd->ulpContext; + if (phba->sli_rev == LPFC_SLI_REV4) + abtsiocbq->iocb.un.acxri.abortIoTag = + iocbq->sli4_xritag; + else + abtsiocbq->iocb.un.acxri.abortIoTag = icmd->ulpIoTag; + abtsiocbq->iocb.ulpLe = 1; + abtsiocbq->iocb.ulpClass = icmd->ulpClass; + abtsiocbq->vport = vport; + + /* ABTS WQE must go to the same WQ as the WQE to be aborted */ + abtsiocbq->fcp_wqidx = iocbq->fcp_wqidx; + if (iocbq->iocb_flag & LPFC_IO_FCP) + abtsiocbq->iocb_flag |= LPFC_USE_FCPWQIDX; + + if (lpfc_is_link_up(phba)) + abtsiocbq->iocb.ulpCommand = CMD_ABORT_XRI_CN; + else + abtsiocbq->iocb.ulpCommand = CMD_CLOSE_XRI_CN; + + /* Setup callback routine and issue the command. */ + abtsiocbq->iocb_cmpl = lpfc_sli_abort_fcp_cmpl; + + /* + * Indicate the IO is being aborted by the driver and set + * the caller's flag into the aborted IO. + */ + iocbq->iocb_flag |= LPFC_DRIVER_ABORTED; + + if (phba->sli_rev == LPFC_SLI_REV4) { + ring_number = MAX_SLI3_CONFIGURED_RINGS + + iocbq->fcp_wqidx; + pring_s4 = &phba->sli.ring[ring_number]; + /* Note: both hbalock and ring_lock must be set here */ + spin_lock_irqsave(&pring_s4->ring_lock, iflags); + ret_val = __lpfc_sli_issue_iocb(phba, pring_s4->ringno, + abtsiocbq, 0); + spin_unlock_irqrestore(&pring_s4->ring_lock, iflags); + } else { + ret_val = __lpfc_sli_issue_iocb(phba, pring->ringno, + abtsiocbq, 0); + } + + + if (ret_val == IOCB_ERROR) + __lpfc_sli_release_iocbq(phba, abtsiocbq); + else + sum++; + } + spin_unlock_irq(&phba->hbalock); + return sum; +} + +/** * lpfc_sli_wake_iocb_wait - lpfc_sli_issue_iocb_wait's completion handler * @phba: Pointer to HBA context object. * @cmdiocbq: Pointer to command iocb. diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h index 6f04080..edb4883 100644 --- a/drivers/scsi/lpfc/lpfc_sli.h +++ b/drivers/scsi/lpfc/lpfc_sli.h @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2013 Emulex. All rights reserved. * + * Copyright (C) 2004-2014 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * * diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h index 9b8cda8..7f50aa0 100644 --- a/drivers/scsi/lpfc/lpfc_sli4.h +++ b/drivers/scsi/lpfc/lpfc_sli4.h @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2009-2013 Emulex. All rights reserved. * + * Copyright (C) 2009-2014 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * * diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h index e32cbec..41675c1 100644 --- a/drivers/scsi/lpfc/lpfc_version.h +++ b/drivers/scsi/lpfc/lpfc_version.h @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2013 Emulex. All rights reserved. * + * Copyright (C) 2004-2014 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * * @@ -18,7 +18,7 @@ * included with this package. * *******************************************************************/ -#define LPFC_DRIVER_VERSION "8.3.45" +#define LPFC_DRIVER_VERSION "10.2.8001.0." #define LPFC_DRIVER_NAME "lpfc" /* Used for SLI 2/3 */ @@ -30,4 +30,4 @@ #define LPFC_MODULE_DESC "Emulex LightPulse Fibre Channel SCSI driver " \ LPFC_DRIVER_VERSION -#define LPFC_COPYRIGHT "Copyright(c) 2004-2013 Emulex. All rights reserved." +#define LPFC_COPYRIGHT "Copyright(c) 2004-2014 Emulex. All rights reserved." diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 1fa0104..de5d0ae 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -1648,16 +1648,16 @@ typedef struct { */ struct crc_context { uint32_t handle; /* System handle. */ - uint32_t ref_tag; - uint16_t app_tag; + __le32 ref_tag; + __le16 app_tag; uint8_t ref_tag_mask[4]; /* Validation/Replacement Mask*/ uint8_t app_tag_mask[2]; /* Validation/Replacement Mask*/ - uint16_t guard_seed; /* Initial Guard Seed */ - uint16_t prot_opts; /* Requested Data Protection Mode */ - uint16_t blk_size; /* Data size in bytes */ + __le16 guard_seed; /* Initial Guard Seed */ + __le16 prot_opts; /* Requested Data Protection Mode */ + __le16 blk_size; /* Data size in bytes */ uint16_t runt_blk_guard; /* Guard value for runt block (tape * only) */ - uint32_t byte_count; /* Total byte count/ total data + __le32 byte_count; /* Total byte count/ total data * transfer count */ union { struct { @@ -1671,10 +1671,10 @@ struct crc_context { uint32_t reserved_6; } nobundling; struct { - uint32_t dif_byte_count; /* Total DIF byte + __le32 dif_byte_count; /* Total DIF byte * count */ uint16_t reserved_1; - uint16_t dseg_count; /* Data segment count */ + __le16 dseg_count; /* Data segment count */ uint32_t reserved_2; uint32_t data_address[2]; uint32_t data_length; diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c index 8d85ed8..4b188b0 100644 --- a/drivers/scsi/qla2xxx/qla_target.c +++ b/drivers/scsi/qla2xxx/qla_target.c @@ -1996,7 +1996,7 @@ qlt_set_t10dif_tags(struct se_cmd *se_cmd, struct crc_context *ctx) * have been immplemented by TCM, before AppTag is avail. * Look for modesense_handlers[] */ - ctx->app_tag = __constant_cpu_to_le16(0); + ctx->app_tag = 0; ctx->app_tag_mask[0] = 0x0; ctx->app_tag_mask[1] = 0x0; @@ -2078,6 +2078,7 @@ qlt_build_ctio_crc2_pkt(struct qla_tgt_prm *prm, scsi_qla_host_t *vha) struct se_cmd *se_cmd = &cmd->se_cmd; uint32_t h; struct atio_from_isp *atio = &prm->cmd->atio; + uint16_t t16; sgc = 0; ha = vha->hw; @@ -2174,8 +2175,13 @@ qlt_build_ctio_crc2_pkt(struct qla_tgt_prm *prm, scsi_qla_host_t *vha) pkt->initiator_id[1] = atio->u.isp24.fcp_hdr.s_id[1]; pkt->initiator_id[2] = atio->u.isp24.fcp_hdr.s_id[0]; pkt->exchange_addr = atio->u.isp24.exchange_addr; - pkt->ox_id = swab16(atio->u.isp24.fcp_hdr.ox_id); - pkt->flags |= (atio->u.isp24.attr << 9); + + /* silence compile warning */ + t16 = be16_to_cpu(atio->u.isp24.fcp_hdr.ox_id); + pkt->ox_id = cpu_to_le16(t16); + + t16 = (atio->u.isp24.attr << 9); + pkt->flags |= cpu_to_le16(t16); pkt->relative_offset = cpu_to_le32(prm->cmd->offset); /* Set transfer direction */ @@ -2250,8 +2256,7 @@ qlt_build_ctio_crc2_pkt(struct qla_tgt_prm *prm, scsi_qla_host_t *vha) if (bundling && prm->prot_seg_cnt) { /* Walks dif segments */ - pkt->add_flags |= - __constant_cpu_to_le16(CTIO_CRC2_AF_DIF_DSD_ENA); + pkt->add_flags |= CTIO_CRC2_AF_DIF_DSD_ENA; cur_dsd = (uint32_t *) &crc_ctx_pkt->u.bundling.dif_address; if (qla24xx_walk_and_build_prot_sglist(ha, NULL, cur_dsd, diff --git a/drivers/scsi/qla2xxx/qla_target.h b/drivers/scsi/qla2xxx/qla_target.h index 5c9f185..e0a58fd 100644 --- a/drivers/scsi/qla2xxx/qla_target.h +++ b/drivers/scsi/qla2xxx/qla_target.h @@ -316,7 +316,7 @@ struct fcp_hdr { uint8_t seq_id; uint8_t df_ctl; uint16_t seq_cnt; - uint16_t ox_id; + __be16 ox_id; uint16_t rx_id; uint32_t parameter; } __packed; @@ -441,7 +441,7 @@ struct ctio7_to_24xx { union { struct { uint16_t reserved1; - uint16_t flags; + __le16 flags; uint32_t residual; uint16_t ox_id; uint16_t scsi_status; @@ -527,7 +527,7 @@ struct ctio_crc2_to_fw { uint32_t handle; /* System handle. */ uint16_t nport_handle; /* N_PORT handle. */ - uint16_t timeout; /* Command timeout. */ + __le16 timeout; /* Command timeout. */ uint16_t dseg_count; /* Data segment count. */ uint8_t vp_index; @@ -538,15 +538,15 @@ struct ctio_crc2_to_fw { uint8_t reserved1; uint32_t exchange_addr; /* rcv exchange address */ uint16_t reserved2; - uint16_t flags; /* refer to CTIO7 flags values */ + __le16 flags; /* refer to CTIO7 flags values */ uint32_t residual; - uint16_t ox_id; + __le16 ox_id; uint16_t scsi_status; - uint32_t relative_offset; + __le32 relative_offset; uint32_t reserved5; - uint32_t transfer_length; /* total fc transfer length */ + __le32 transfer_length; /* total fc transfer length */ uint32_t reserved6; - uint32_t crc_context_address[2];/* Data segment address. */ + __le32 crc_context_address[2];/* Data segment address. */ uint16_t crc_context_len; /* Data segment length. */ uint16_t reserved_1; /* MUST be set to 0. */ } __packed; |