summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2007-02-07 18:19:26 +0100
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2007-02-07 18:19:26 +0100
commit6788182602f6862688d9a14e6f527449696f65c6 (patch)
tree6185f646f851f98561033c26d2a73b584a59c6e9 /drivers
parent9c6712c0bcd2954fb4ca58d31f7316292a4b0945 (diff)
downloadop-kernel-dev-6788182602f6862688d9a14e6f527449696f65c6.zip
op-kernel-dev-6788182602f6862688d9a14e6f527449696f65c6.tar.gz
ide: it8213 IDE driver update (version 2)
* set ATAPI/IORDY/TIME bits correctly in it8213_tuneproc() * fix UDMA/MWDMA/SWDMA masks in it8213_init_hwif() * in it8213_tune_chipset() SWDMA2 mode should be used instead of MWDMA0 * backport various fixes from piix/slc90e66 drivers: - in it8213_tuneproc() the highest possible PIO mode is PIO4 (not PIO5) - clear ATAPI/IORDY/TIME bits before setting them also for slave device - use ->speedproc in it8213_config_drive_for_dma() - don't try to tune PIO in config_chipset_for_pio() - simplify is_slave calculation in it8213_tuneproc() - misc cleanups * fix it8213_ratemask() and it8213_tuneproc() comments * simplify it8213_init_hwif() * remove init_chipset_it8213() * add missing Copyrights and update MODULE_AUTHOR() * CodingStyle cleanups * remove dead code v2: * PCI_DEVICE_ID_ITE_8213 is only defined in -mm kernels, so just use PCI Device ID (0x8213) directly * fix ->ultra_mask incorrectly changed to 0x3f in v1 version of the patch Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/ide/pci/it8213.c172
1 files changed, 66 insertions, 106 deletions
diff --git a/drivers/ide/pci/it8213.c b/drivers/ide/pci/it8213.c
index 6b46edf..63248b6 100644
--- a/drivers/ide/pci/it8213.c
+++ b/drivers/ide/pci/it8213.c
@@ -1,3 +1,11 @@
+/*
+ * ITE 8213 IDE driver
+ *
+ * Copyright (C) 2006 Jack Lee
+ * Copyright (C) 2006 Alan Cox
+ * Copyright (C) 2007 Bartlomiej Zolnierkiewicz
+ */
+
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/module.h>
@@ -14,14 +22,14 @@
* @drive: IDE drive
*
* Compute the available speeds for the devices on the interface. This
- * is all modes to ATA100 clipped by drive cable setup.
+ * is all modes to ATA133 clipped by drive cable setup.
*/
static u8 it8213_ratemask (ide_drive_t *drive)
{
u8 mode = 4;
if (!eighty_ninty_three(drive))
- mode = min(mode, (u8)1);
+ mode = min_t(u8, mode, 1);
return mode;
}
@@ -62,55 +70,57 @@ static u8 it8213_dma_2_pio (u8 xfer_rate) {
}
}
-static spinlock_t tune_lock = SPIN_LOCK_UNLOCKED;
-
/*
* it8213_tuneproc - tune a drive
* @drive: drive to tune
- * @mode_wanted: the target operating mode
- *
- * Load the timing settings for this device mode into the
- * controller. By the time we are called the mode has been
- * modified as neccessary to handle the absence of seperate
- * master/slave timers for MWDMA/PIO.
+ * @pio: desired PIO mode
*
- * This code is only used in pass through mode.
+ * Set the interface PIO mode.
*/
-static void it8213_tuneproc (ide_drive_t *drive, u8 pio)
+static void it8213_tuneproc (ide_drive_t *drive, u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
- int is_slave = (&hwif->drives[1] == drive);
+ int is_slave = drive->dn & 1;
int master_port = 0x40;
int slave_port = 0x44;
unsigned long flags;
u16 master_data;
u8 slave_data;
+ static DEFINE_SPINLOCK(tune_lock);
+ int control = 0;
- u8 timings[][2] = { { 0, 0 },
- { 0, 0 },
- { 1, 0 },
- { 2, 1 },
- { 2, 3 }, };
+ static const u8 timings[][2]= {
+ { 0, 0 },
+ { 0, 0 },
+ { 1, 0 },
+ { 2, 1 },
+ { 2, 3 }, };
- pio = ide_get_best_pio_mode(drive, pio, 5, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
spin_lock_irqsave(&tune_lock, flags);
pci_read_config_word(dev, master_port, &master_data);
+
+ if (pio > 1)
+ control |= 1; /* Programmable timing on */
+ if (drive->media != ide_disk)
+ control |= 4; /* ATAPI */
+ if (pio > 2)
+ control |= 2; /* IORDY */
if (is_slave) {
- master_data = master_data | 0x4000;
+ master_data |= 0x4000;
+ master_data &= ~0x0070;
if (pio > 1)
-
- master_data = master_data | 0x0070;
+ master_data = master_data | (control << 4);
pci_read_config_byte(dev, slave_port, &slave_data);
slave_data = slave_data & 0xf0;
- slave_data = slave_data | (((timings[pio][0] << 2) | (timings[pio][1]) << 0));
+ slave_data = slave_data | (timings[pio][0] << 2) | timings[pio][1];
} else {
- master_data = master_data & 0xccf8;
+ master_data &= ~0x3307;
if (pio > 1)
-
- master_data = master_data | 0x0007;
+ master_data = master_data | control;
master_data = master_data | (timings[pio][0] << 12) | (timings[pio][1] << 8);
}
pci_write_config_word(dev, master_port, master_data);
@@ -119,7 +129,6 @@ static void it8213_tuneproc (ide_drive_t *drive, u8 pio)
spin_unlock_irqrestore(&tune_lock, flags);
}
-
/**
* it8213_tune_chipset - set controller timings
* @drive: Drive to set up
@@ -130,7 +139,7 @@ static void it8213_tuneproc (ide_drive_t *drive, u8 pio)
* make the thing work.
*/
-static int it8213_tune_chipset (ide_drive_t *drive, byte xferspeed)
+static int it8213_tune_chipset (ide_drive_t *drive, u8 xferspeed)
{
ide_hwif_t *hwif = HWIF(drive);
@@ -154,15 +163,15 @@ static int it8213_tune_chipset (ide_drive_t *drive, byte xferspeed)
switch(speed) {
case XFER_UDMA_6:
case XFER_UDMA_4:
- case XFER_UDMA_2:u_speed = 2 << (drive->dn * 4); break;
+ case XFER_UDMA_2: u_speed = 2 << (drive->dn * 4); break;
case XFER_UDMA_5:
case XFER_UDMA_3:
- case XFER_UDMA_1:u_speed = 1 << (drive->dn * 4); break;
- case XFER_UDMA_0:u_speed = 0 << (drive->dn * 4); break;
+ case XFER_UDMA_1: u_speed = 1 << (drive->dn * 4); break;
+ case XFER_UDMA_0: u_speed = 0 << (drive->dn * 4); break;
break;
case XFER_MW_DMA_2:
case XFER_MW_DMA_1:
- case XFER_MW_DMA_0:
+ case XFER_SW_DMA_2:
break;
case XFER_PIO_4:
case XFER_PIO_3:
@@ -174,8 +183,7 @@ static int it8213_tune_chipset (ide_drive_t *drive, byte xferspeed)
return -1;
}
- if (speed >= XFER_UDMA_0)
- {
+ if (speed >= XFER_UDMA_0) {
if (!(reg48 & u_flag))
pci_write_config_byte(dev, 0x48, reg48 | u_flag);
if (speed >= XFER_UDMA_5) {
@@ -186,14 +194,12 @@ static int it8213_tune_chipset (ide_drive_t *drive, byte xferspeed)
if ((reg4a & a_speed) != u_speed)
pci_write_config_word(dev, 0x4a, (reg4a & ~a_speed) | u_speed);
- if (speed > XFER_UDMA_2)
- {
+ if (speed > XFER_UDMA_2) {
if (!(reg54 & v_flag))
pci_write_config_byte(dev, 0x54, reg54 | v_flag);
} else
pci_write_config_byte(dev, 0x54, reg54 & ~v_flag);
- } else /*if(speed >= XFER_UDMA_0)*/
- {
+ } else {
if (reg48 & u_flag)
pci_write_config_byte(dev, 0x48, reg48 & ~u_flag);
if (reg4a & a_speed)
@@ -202,11 +208,10 @@ static int it8213_tune_chipset (ide_drive_t *drive, byte xferspeed)
pci_write_config_byte(dev, 0x54, reg54 & ~v_flag);
if (reg55 & w_flag)
pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag);
- }
+ }
it8213_tuneproc(drive, it8213_dma_2_pio(speed));
return ide_config_drive_speed(drive, speed);
- }
-
+}
/*
* config_chipset_for_dma - configure for DMA
@@ -217,48 +222,17 @@ static int it8213_tune_chipset (ide_drive_t *drive, byte xferspeed)
static int config_chipset_for_dma (ide_drive_t *drive)
{
- u8 speed = ide_dma_speed(drive, it8213_ratemask(drive));
+ u8 speed = ide_dma_speed(drive, it8213_ratemask(drive));
+
if (!speed)
- {
- u8 tspeed = ide_get_best_pio_mode(drive, 255, 5, NULL);
- speed = it8213_dma_2_pio(XFER_PIO_0 + tspeed);
- }
-// config_it8213_chipset_for_pio(drive, !speed);
+ return 0;
+
it8213_tune_chipset(drive, speed);
+
return ide_dma_enable(drive);
}
/**
- * config_it8213_chipset_for_pio - set drive timings
- * @drive: drive to tune
- * @speed we want
- *
- * Compute the best pio mode we can for a given device. We must
- * pick a speed that does not cause problems with the other device
- * on the cable.
- */
-/*
-static void config_it8213_chipset_for_pio (ide_drive_t *drive, byte set_speed)
-{
- ide_hwif_t *hwif = HWIF(drive);
-// u8 unit = drive->select.b.unit;
- ide_hwif_t *hwif = drive->hwif;
- ide_drive_t *pair = &hwif->drives[1-unit];
- u8 speed = 0, set_pio = ide_get_best_pio_mode(drive, 255, 5, NULL);
- u8 pair_pio;
-
- if(pair != NULL) {
- pair_pio = ide_get_best_pio_mode(pair, 255, 5, NULL);
- if(pair_pio < set_pio)
- set_pio = pair_pio;
- }
- it8213_tuneproc(drive, set_pio);
- speed = XFER_PIO_0 + set_pio;
- if (set_speed)
- (void) ide_config_drive_speed(drive, speed);
-}
-*/
-/**
* it8213_configure_drive_for_dma - set up for DMA transfers
* @drive: drive we are going to set up
*
@@ -270,26 +244,19 @@ static void config_it8213_chipset_for_pio (ide_drive_t *drive, byte set_speed)
static int it8213_config_drive_for_dma (ide_drive_t *drive)
{
-// ide_hwif_t *hwif = drive->hwif;
-// struct hd_driveid *id = drive->id;
- ide_hwif_t *hwif = HWIF(drive);
+ ide_hwif_t *hwif = drive->hwif;
+
if (ide_use_dma(drive)) {
if (config_chipset_for_dma(drive))
return hwif->ide_dma_on(drive);
}
-// config_it8213_chipset_for_pio(drive, 1);
- hwif->tuneproc(drive, 255);
- return hwif->ide_dma_off_quietly(drive);
-}
+ hwif->speedproc(drive, XFER_PIO_0
+ + ide_get_best_pio_mode(drive, 255, 4, NULL));
-static unsigned int __devinit init_chipset_it8213(struct pci_dev *dev, const char *name)
-{
- printk(KERN_INFO "it8213: controller in IDE mode.\n");
- return 0;
+ return hwif->ide_dma_off_quietly(drive);
}
-
/**
* init_hwif_it8213 - set up hwif structs
* @hwif: interface to set up
@@ -302,9 +269,6 @@ static unsigned int __devinit init_chipset_it8213(struct pci_dev *dev, const cha
static void __devinit init_hwif_it8213(ide_hwif_t *hwif)
{
u8 reg42h = 0, ata66 = 0;
- u8 mask = 0x02;
-
- hwif->atapi_dma = 1;
hwif->speedproc = &it8213_tune_chipset;
hwif->tuneproc = &it8213_tuneproc;
@@ -315,19 +279,19 @@ static void __devinit init_hwif_it8213(ide_hwif_t *hwif)
hwif->drives[1].autotune = 1;
if (!hwif->dma_base)
- goto fallback;
+ return;
+
hwif->atapi_dma = 1;
hwif->ultra_mask = 0x7f;
- hwif->mwdma_mask = 0x07;
- hwif->swdma_mask = 0x07;
+ hwif->mwdma_mask = 0x06;
+ hwif->swdma_mask = 0x04;
pci_read_config_byte(hwif->pci_dev, 0x42, &reg42h);
- ata66 = (reg42h & mask) ? 0 : 1;
+ ata66 = (reg42h & 0x02) ? 0 : 1;
hwif->ide_dma_check = &it8213_config_drive_for_dma;
if (!(hwif->udma_four))
hwif->udma_four = ata66;
-// hwif->udma_four = 0;
/*
* The BIOS often doesn't set up DMA on this controller
@@ -338,20 +302,15 @@ static void __devinit init_hwif_it8213(ide_hwif_t *hwif)
hwif->drives[0].autodma = hwif->autodma;
hwif->drives[1].autodma = hwif->autodma;
- return;
-fallback:
- hwif->autodma = 0;
- return;
}
#define DECLARE_ITE_DEV(name_str) \
{ \
.name = name_str, \
- .init_chipset = init_chipset_it8213, \
.init_hwif = init_hwif_it8213, \
.channels = 1, \
- .autodma = AUTODMA, \
+ .autodma = AUTODMA, \
.enablebits = {{0x41,0x80,0x80}}, \
.bootable = ON_BOARD, \
}
@@ -379,7 +338,7 @@ static int __devinit it8213_init_one(struct pci_dev *dev, const struct pci_devic
static struct pci_device_id it8213_pci_tbl[] = {
- { PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8213, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { PCI_VENDOR_ID_ITE, 0x8213, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
{ 0, },
};
@@ -393,10 +352,11 @@ static struct pci_driver driver = {
static int __init it8213_ide_init(void)
{
- return ide_pci_register_driver(&driver); }
+ return ide_pci_register_driver(&driver);
+}
module_init(it8213_ide_init);
-MODULE_AUTHOR("Jack and Alan Cox"); /* Update this */
+MODULE_AUTHOR("Jack Lee, Alan Cox");
MODULE_DESCRIPTION("PCI driver module for the ITE 8213");
MODULE_LICENSE("GPL");
OpenPOWER on IntegriCloud