summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2008-10-15 08:07:35 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2008-10-15 08:07:35 -0700
commit5f2434a66dfa4701b81b79a78eaf9c32da0f8839 (patch)
tree8c38f1fb0d0fbcd15e496df89be00ad8c4918a43 /drivers
parent278429cff8809958d25415ba0ed32b59866ab1a8 (diff)
parent6dc6472581f693b5fc95aebedf67b4960fb85cf0 (diff)
downloadop-kernel-dev-5f2434a66dfa4701b81b79a78eaf9c32da0f8839.zip
op-kernel-dev-5f2434a66dfa4701b81b79a78eaf9c32da0f8839.tar.gz
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (158 commits) powerpc: Fix CHRP PCI config access for indirect_pci powerpc/chrp: Fix detection of Python PCI host bridge on IBM CHRPs powerpc: Fix 32-bit SMP boot on CHRP powerpc: Fix link errors on 32-bit machines using legacy DMA powerpc/pci: Improve detection of unassigned bridge resources hvc_console: Fix free_irq in spinlocked section powerpc: Get USE_STRICT_MM_TYPECHECKS working again powerpc: Reflect the used arguments in machine_init() prototype powerpc: Fix DMA offset for non-coherent DMA powerpc: fix fsl_upm nand driver modular build powerpc/83xx: add NAND support for the MPC8360E-RDK boards powerpc: FPGA support for GE Fanuc SBC610 i2c: MPC8349E-mITX Power Management and GPIO expander driver powerpc: reserve two DMA channels for audio in MPC8610 HPCD device tree powerpc: document the "fsl,ssi-dma-channel" compatible property powerpc: disable CHRP and PMAC support in various defconfigs OF: add fsl,mcu-mpc8349emitx to the exception list powerpc/83xx: add DS1374 RTC support for the MPC837xE-MDS boards powerpc: remove support for bootmem-allocated memory for the DIU driver powerpc: remove non-dependent load fsl_booke PTE_64BIT ...
Diffstat (limited to 'drivers')
-rw-r--r--drivers/ata/pata_of_platform.c2
-rw-r--r--drivers/block/floppy.c2
-rw-r--r--drivers/block/viodasd.c3
-rw-r--r--drivers/char/hvc_console.c10
-rw-r--r--drivers/char/ipmi/ipmi_si_intf.c2
-rw-r--r--drivers/hwmon/ams/ams.h2
-rw-r--r--drivers/i2c/busses/i2c-mpc.c1
-rw-r--r--drivers/i2c/busses/i2c-pca-isa.c2
-rw-r--r--drivers/i2c/chips/Kconfig11
-rw-r--r--drivers/i2c/chips/Makefile1
-rw-r--r--drivers/i2c/chips/mcu_mpc8349emitx.c209
-rw-r--r--drivers/input/serio/i8042-io.h2
-rw-r--r--drivers/net/ibm_newemac/Kconfig12
-rw-r--r--drivers/net/ibm_newemac/core.c42
-rw-r--r--drivers/net/ibm_newemac/core.h6
-rw-r--r--drivers/net/ibm_newemac/mal.c60
-rw-r--r--drivers/net/ibm_newemac/mal.h34
-rw-r--r--drivers/net/ibm_newemac/phy.c84
-rw-r--r--drivers/net/ibm_newemac/phy.h2
-rw-r--r--drivers/of/base.c136
-rw-r--r--drivers/of/gpio.c81
-rw-r--r--drivers/pci/hotplug/rpaphp_slot.c4
-rw-r--r--drivers/pnp/isapnp/core.c2
-rw-r--r--drivers/pnp/pnpbios/core.c4
-rw-r--r--drivers/serial/Kconfig36
-rw-r--r--drivers/serial/cpm_uart/cpm_uart_core.c3
-rw-r--r--drivers/serial/cpm_uart/cpm_uart_cpm1.c6
-rw-r--r--drivers/serial/cpm_uart/cpm_uart_cpm2.c6
-rw-r--r--drivers/serial/mpc52xx_uart.c181
-rw-r--r--drivers/serial/ucc_uart.c4
-rw-r--r--drivers/spi/mpc52xx_psc_spi.c6
31 files changed, 610 insertions, 346 deletions
diff --git a/drivers/ata/pata_of_platform.c b/drivers/ata/pata_of_platform.c
index 408da30..1f18ad9 100644
--- a/drivers/ata/pata_of_platform.c
+++ b/drivers/ata/pata_of_platform.c
@@ -52,7 +52,7 @@ static int __devinit pata_of_platform_probe(struct of_device *ofdev,
ret = of_irq_to_resource(dn, 0, &irq_res);
if (ret == NO_IRQ)
- irq_res.start = irq_res.end = -1;
+ irq_res.start = irq_res.end = 0;
else
irq_res.flags = 0;
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index cf64ddf..2cea27a 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -4172,7 +4172,7 @@ static int __init floppy_init(void)
int i, unit, drive;
int err, dr;
-#if defined(CONFIG_PPC_MERGE)
+#if defined(CONFIG_PPC)
if (check_legacy_ioport(FDC1))
return -ENODEV;
#endif
diff --git a/drivers/block/viodasd.c b/drivers/block/viodasd.c
index f1c8feb..1730d29 100644
--- a/drivers/block/viodasd.c
+++ b/drivers/block/viodasd.c
@@ -249,7 +249,6 @@ static int send_request(struct request *req)
struct HvLpEvent *hev;
struct scatterlist sg[VIOMAXBLOCKDMA];
int sgindex;
- int statindex;
struct viodasd_device *d;
unsigned long flags;
@@ -258,11 +257,9 @@ static int send_request(struct request *req)
if (rq_data_dir(req) == READ) {
direction = DMA_FROM_DEVICE;
viocmd = viomajorsubtype_blockio | vioblockread;
- statindex = 0;
} else {
direction = DMA_TO_DEVICE;
viocmd = viomajorsubtype_blockio | vioblockwrite;
- statindex = 1;
}
d = req->rq_disk->private_data;
diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
index ec7aded..bf70450 100644
--- a/drivers/char/hvc_console.c
+++ b/drivers/char/hvc_console.c
@@ -367,13 +367,13 @@ static void hvc_close(struct tty_struct *tty, struct file * filp)
spin_lock_irqsave(&hp->lock, flags);
if (--hp->count == 0) {
- if (hp->ops->notifier_del)
- hp->ops->notifier_del(hp, hp->data);
-
/* We are done with the tty pointer now. */
hp->tty = NULL;
spin_unlock_irqrestore(&hp->lock, flags);
+ if (hp->ops->notifier_del)
+ hp->ops->notifier_del(hp, hp->data);
+
/*
* Chain calls chars_in_buffer() and returns immediately if
* there is no buffered data otherwise sleeps on a wait queue
@@ -416,11 +416,11 @@ static void hvc_hangup(struct tty_struct *tty)
hp->n_outbuf = 0;
hp->tty = NULL;
+ spin_unlock_irqrestore(&hp->lock, flags);
+
if (hp->ops->notifier_del)
hp->ops->notifier_del(hp, hp->data);
- spin_unlock_irqrestore(&hp->lock, flags);
-
while(temp_open_count) {
--temp_open_count;
kref_put(&hp->kref, destroy_hvc_struct);
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 8e8afb6..3123bf5 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -2695,7 +2695,7 @@ static __devinit void default_find_bmc(void)
for (i = 0; ; i++) {
if (!ipmi_defaults[i].port)
break;
-#ifdef CONFIG_PPC_MERGE
+#ifdef CONFIG_PPC
if (check_legacy_ioport(ipmi_defaults[i].port))
continue;
#endif
diff --git a/drivers/hwmon/ams/ams.h b/drivers/hwmon/ams/ams.h
index a6221e5..221ef69 100644
--- a/drivers/hwmon/ams/ams.h
+++ b/drivers/hwmon/ams/ams.h
@@ -4,7 +4,7 @@
#include <linux/mutex.h>
#include <linux/spinlock.h>
#include <linux/types.h>
-#include <asm/of_device.h>
+#include <linux/of_device.h>
enum ams_irq {
AMS_IRQ_FREEFALL = 0x01,
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 27443f0..a9a45fc 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -312,7 +312,6 @@ static struct i2c_adapter mpc_ops = {
.name = "MPC adapter",
.id = I2C_HW_MPC107,
.algo = &mpc_algo,
- .class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.timeout = 1,
};
diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c
index f80df9a..9eb7626 100644
--- a/drivers/i2c/busses/i2c-pca-isa.c
+++ b/drivers/i2c/busses/i2c-pca-isa.c
@@ -126,7 +126,7 @@ static int __devinit pca_isa_probe(struct device *dev, unsigned int id)
dev_info(dev, "i/o base %#08lx. irq %d\n", base, irq);
-#ifdef CONFIG_PPC_MERGE
+#ifdef CONFIG_PPC
if (check_legacy_ioport(base)) {
dev_err(dev, "I/O address %#08lx is not available\n", base);
goto out;
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index a95cb94..1735682 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -172,4 +172,15 @@ config MENELAUS
and other features that are often used in portable devices like
cell phones and PDAs.
+config MCU_MPC8349EMITX
+ tristate "MPC8349E-mITX MCU driver"
+ depends on I2C && PPC_83xx
+ select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ help
+ Say Y here to enable soft power-off functionality on the Freescale
+ boards with the MPC8349E-mITX-compatible MCU chips. This driver will
+ also register MCU GPIOs with the generic GPIO API, so you'll able
+ to use MCU pins as GPIOs.
+
endmenu
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index 39e3e69..ca520fa 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o
obj-$(CONFIG_TPS65010) += tps65010.o
obj-$(CONFIG_MENELAUS) += menelaus.o
obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o
+obj-$(CONFIG_MCU_MPC8349EMITX) += mcu_mpc8349emitx.o
ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
EXTRA_CFLAGS += -DDEBUG
diff --git a/drivers/i2c/chips/mcu_mpc8349emitx.c b/drivers/i2c/chips/mcu_mpc8349emitx.c
new file mode 100644
index 0000000..82a9bcb
--- /dev/null
+++ b/drivers/i2c/chips/mcu_mpc8349emitx.c
@@ -0,0 +1,209 @@
+/*
+ * Power Management and GPIO expander driver for MPC8349E-mITX-compatible MCU
+ *
+ * Copyright (c) 2008 MontaVista Software, Inc.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/mutex.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <asm/prom.h>
+#include <asm/machdep.h>
+
+/*
+ * I don't have specifications for the MCU firmware, I found this register
+ * and bits positions by the trial&error method.
+ */
+#define MCU_REG_CTRL 0x20
+#define MCU_CTRL_POFF 0x40
+
+#define MCU_NUM_GPIO 2
+
+struct mcu {
+ struct mutex lock;
+ struct device_node *np;
+ struct i2c_client *client;
+ struct of_gpio_chip of_gc;
+ u8 reg_ctrl;
+};
+
+static struct mcu *glob_mcu;
+
+static void mcu_power_off(void)
+{
+ struct mcu *mcu = glob_mcu;
+
+ pr_info("Sending power-off request to the MCU...\n");
+ mutex_lock(&mcu->lock);
+ i2c_smbus_write_byte_data(glob_mcu->client, MCU_REG_CTRL,
+ mcu->reg_ctrl | MCU_CTRL_POFF);
+ mutex_unlock(&mcu->lock);
+}
+
+static void mcu_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ struct of_gpio_chip *of_gc = to_of_gpio_chip(gc);
+ struct mcu *mcu = container_of(of_gc, struct mcu, of_gc);
+ u8 bit = 1 << (4 + gpio);
+
+ mutex_lock(&mcu->lock);
+ if (val)
+ mcu->reg_ctrl &= ~bit;
+ else
+ mcu->reg_ctrl |= bit;
+
+ i2c_smbus_write_byte_data(mcu->client, MCU_REG_CTRL, mcu->reg_ctrl);
+ mutex_unlock(&mcu->lock);
+}
+
+static int mcu_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ mcu_gpio_set(gc, gpio, val);
+ return 0;
+}
+
+static int mcu_gpiochip_add(struct mcu *mcu)
+{
+ struct device_node *np;
+ struct of_gpio_chip *of_gc = &mcu->of_gc;
+ struct gpio_chip *gc = &of_gc->gc;
+ int ret;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,mcu-mpc8349emitx");
+ if (!np)
+ return -ENODEV;
+
+ gc->owner = THIS_MODULE;
+ gc->label = np->full_name;
+ gc->can_sleep = 1;
+ gc->ngpio = MCU_NUM_GPIO;
+ gc->base = -1;
+ gc->set = mcu_gpio_set;
+ gc->direction_output = mcu_gpio_dir_out;
+ of_gc->gpio_cells = 2;
+ of_gc->xlate = of_gpio_simple_xlate;
+
+ np->data = of_gc;
+ mcu->np = np;
+
+ /*
+ * We don't want to lose the node, its ->data and ->full_name...
+ * So, if succeeded, we don't put the node here.
+ */
+ ret = gpiochip_add(gc);
+ if (ret)
+ of_node_put(np);
+ return ret;
+}
+
+static int mcu_gpiochip_remove(struct mcu *mcu)
+{
+ int ret;
+
+ ret = gpiochip_remove(&mcu->of_gc.gc);
+ if (ret)
+ return ret;
+ of_node_put(mcu->np);
+
+ return 0;
+}
+
+static int __devinit mcu_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct mcu *mcu;
+ int ret;
+
+ mcu = kzalloc(sizeof(*mcu), GFP_KERNEL);
+ if (!mcu)
+ return -ENOMEM;
+
+ mutex_init(&mcu->lock);
+ mcu->client = client;
+ i2c_set_clientdata(client, mcu);
+
+ ret = i2c_smbus_read_byte_data(mcu->client, MCU_REG_CTRL);
+ if (ret < 0)
+ goto err;
+ mcu->reg_ctrl = ret;
+
+ ret = mcu_gpiochip_add(mcu);
+ if (ret)
+ goto err;
+
+ /* XXX: this is potentially racy, but there is no lock for ppc_md */
+ if (!ppc_md.power_off) {
+ glob_mcu = mcu;
+ ppc_md.power_off = mcu_power_off;
+ dev_info(&client->dev, "will provide power-off service\n");
+ }
+
+ return 0;
+err:
+ kfree(mcu);
+ return ret;
+}
+
+static int __devexit mcu_remove(struct i2c_client *client)
+{
+ struct mcu *mcu = i2c_get_clientdata(client);
+ int ret;
+
+ if (glob_mcu == mcu) {
+ ppc_md.power_off = NULL;
+ glob_mcu = NULL;
+ }
+
+ ret = mcu_gpiochip_remove(mcu);
+ if (ret)
+ return ret;
+ i2c_set_clientdata(client, NULL);
+ kfree(mcu);
+ return 0;
+}
+
+static const struct i2c_device_id mcu_ids[] = {
+ { "mcu-mpc8349emitx", },
+ {},
+};
+MODULE_DEVICE_TABLE(i2c, mcu_ids);
+
+static struct i2c_driver mcu_driver = {
+ .driver = {
+ .name = "mcu-mpc8349emitx",
+ .owner = THIS_MODULE,
+ },
+ .probe = mcu_probe,
+ .remove = __devexit_p(mcu_remove),
+ .id_table = mcu_ids,
+};
+
+static int __init mcu_init(void)
+{
+ return i2c_add_driver(&mcu_driver);
+}
+module_init(mcu_init);
+
+static void __exit mcu_exit(void)
+{
+ i2c_del_driver(&mcu_driver);
+}
+module_exit(mcu_exit);
+
+MODULE_DESCRIPTION("Power Management and GPIO expander driver for "
+ "MPC8349E-mITX-compatible MCU");
+MODULE_AUTHOR("Anton Vorontsov <avorontsov@ru.mvista.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/serio/i8042-io.h b/drivers/input/serio/i8042-io.h
index f451c73..847f4aa 100644
--- a/drivers/input/serio/i8042-io.h
+++ b/drivers/input/serio/i8042-io.h
@@ -67,7 +67,7 @@ static inline int i8042_platform_init(void)
* On some platforms touching the i8042 data register region can do really
* bad things. Because of this the region is always reserved on such boxes.
*/
-#if defined(CONFIG_PPC_MERGE)
+#if defined(CONFIG_PPC)
if (check_legacy_ioport(I8042_DATA_REG))
return -ENODEV;
#endif
diff --git a/drivers/net/ibm_newemac/Kconfig b/drivers/net/ibm_newemac/Kconfig
index bcec732..78a1628 100644
--- a/drivers/net/ibm_newemac/Kconfig
+++ b/drivers/net/ibm_newemac/Kconfig
@@ -62,3 +62,15 @@ config IBM_NEW_EMAC_TAH
config IBM_NEW_EMAC_EMAC4
bool
default n
+
+config IBM_NEW_EMAC_NO_FLOW_CTRL
+ bool
+ default n
+
+config IBM_NEW_EMAC_MAL_CLR_ICINTSTAT
+ bool
+ default n
+
+config IBM_NEW_EMAC_MAL_COMMON_ERR
+ bool
+ default n
diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c
index 58dfd32..efcf21c 100644
--- a/drivers/net/ibm_newemac/core.c
+++ b/drivers/net/ibm_newemac/core.c
@@ -202,13 +202,15 @@ static inline int emac_phy_supports_gige(int phy_mode)
{
return phy_mode == PHY_MODE_GMII ||
phy_mode == PHY_MODE_RGMII ||
+ phy_mode == PHY_MODE_SGMII ||
phy_mode == PHY_MODE_TBI ||
phy_mode == PHY_MODE_RTBI;
}
static inline int emac_phy_gpcs(int phy_mode)
{
- return phy_mode == PHY_MODE_TBI ||
+ return phy_mode == PHY_MODE_SGMII ||
+ phy_mode == PHY_MODE_TBI ||
phy_mode == PHY_MODE_RTBI;
}
@@ -562,8 +564,9 @@ static int emac_configure(struct emac_instance *dev)
switch (dev->phy.speed) {
case SPEED_1000:
if (emac_phy_gpcs(dev->phy.mode)) {
- mr1 |= EMAC_MR1_MF_1000GPCS |
- EMAC_MR1_MF_IPPA(dev->phy.address);
+ mr1 |= EMAC_MR1_MF_1000GPCS | EMAC_MR1_MF_IPPA(
+ (dev->phy.gpcs_address != 0xffffffff) ?
+ dev->phy.gpcs_address : dev->phy.address);
/* Put some arbitrary OUI, Manuf & Rev IDs so we can
* identify this GPCS PHY later.
@@ -675,8 +678,12 @@ static int emac_configure(struct emac_instance *dev)
out_be32(&p->iser, r);
/* We need to take GPCS PHY out of isolate mode after EMAC reset */
- if (emac_phy_gpcs(dev->phy.mode))
- emac_mii_reset_phy(&dev->phy);
+ if (emac_phy_gpcs(dev->phy.mode)) {
+ if (dev->phy.gpcs_address != 0xffffffff)
+ emac_mii_reset_gpcs(&dev->phy);
+ else
+ emac_mii_reset_phy(&dev->phy);
+ }
return 0;
}
@@ -881,7 +888,9 @@ static int emac_mdio_read(struct net_device *ndev, int id, int reg)
struct emac_instance *dev = netdev_priv(ndev);
int res;
- res = __emac_mdio_read(dev->mdio_instance ? dev->mdio_instance : dev,
+ res = __emac_mdio_read((dev->mdio_instance &&
+ dev->phy.gpcs_address != id) ?
+ dev->mdio_instance : dev,
(u8) id, (u8) reg);
return res;
}
@@ -890,7 +899,9 @@ static void emac_mdio_write(struct net_device *ndev, int id, int reg, int val)
{
struct emac_instance *dev = netdev_priv(ndev);
- __emac_mdio_write(dev->mdio_instance ? dev->mdio_instance : dev,
+ __emac_mdio_write((dev->mdio_instance &&
+ dev->phy.gpcs_address != id) ?
+ dev->mdio_instance : dev,
(u8) id, (u8) reg, (u16) val);
}
@@ -2382,7 +2393,11 @@ static int __devinit emac_init_phy(struct emac_instance *dev)
* XXX I probably should move these settings to the dev tree
*/
dev->phy.address = -1;
- dev->phy.features = SUPPORTED_100baseT_Full | SUPPORTED_MII;
+ dev->phy.features = SUPPORTED_MII;
+ if (emac_phy_supports_gige(dev->phy_mode))
+ dev->phy.features |= SUPPORTED_1000baseT_Full;
+ else
+ dev->phy.features |= SUPPORTED_100baseT_Full;
dev->phy.pause = 1;
return 0;
@@ -2421,7 +2436,9 @@ static int __devinit emac_init_phy(struct emac_instance *dev)
* Note that the busy_phy_map is currently global
* while it should probably be per-ASIC...
*/
- dev->phy.address = dev->cell_index;
+ dev->phy.gpcs_address = dev->gpcs_address;
+ if (dev->phy.gpcs_address == 0xffffffff)
+ dev->phy.address = dev->cell_index;
}
emac_configure(dev);
@@ -2531,6 +2548,8 @@ static int __devinit emac_init_config(struct emac_instance *dev)
dev->phy_address = 0xffffffff;
if (emac_read_uint_prop(np, "phy-map", &dev->phy_map, 0))
dev->phy_map = 0xffffffff;
+ if (emac_read_uint_prop(np, "gpcs-address", &dev->gpcs_address, 0))
+ dev->gpcs_address = 0xffffffff;
if (emac_read_uint_prop(np->parent, "clock-frequency", &dev->opb_bus_freq, 1))
return -ENXIO;
if (emac_read_uint_prop(np, "tah-device", &dev->tah_ph, 0))
@@ -2585,6 +2604,8 @@ static int __devinit emac_init_config(struct emac_instance *dev)
if (of_device_is_compatible(np, "ibm,emac-440ep") ||
of_device_is_compatible(np, "ibm,emac-440gr"))
dev->features |= EMAC_FTR_440EP_PHY_CLK_FIX;
+ if (of_device_is_compatible(np, "ibm,emac-405ez"))
+ dev->features |= EMAC_FTR_NO_FLOW_CONTROL_40x;
}
/* Fixup some feature bits based on the device tree */
@@ -2842,6 +2863,9 @@ static int __devinit emac_probe(struct of_device *ofdev,
ndev->dev_addr[0], ndev->dev_addr[1], ndev->dev_addr[2],
ndev->dev_addr[3], ndev->dev_addr[4], ndev->dev_addr[5]);
+ if (dev->phy_mode == PHY_MODE_SGMII)
+ printk(KERN_NOTICE "%s: in SGMII mode\n", ndev->name);
+
if (dev->phy.address >= 0)
printk("%s: found %s PHY (0x%02x)\n", ndev->name,
dev->phy.def->name, dev->phy.address);
diff --git a/drivers/net/ibm_newemac/core.h b/drivers/net/ibm_newemac/core.h
index 5ca70e5..18d56c6 100644
--- a/drivers/net/ibm_newemac/core.h
+++ b/drivers/net/ibm_newemac/core.h
@@ -190,6 +190,9 @@ struct emac_instance {
struct delayed_work link_work;
int link_polling;
+ /* GPCS PHY infos */
+ u32 gpcs_address;
+
/* Shared MDIO if any */
u32 mdio_ph;
struct of_device *mdio_dev;
@@ -345,6 +348,9 @@ enum {
#ifdef CONFIG_IBM_NEW_EMAC_RGMII
EMAC_FTR_HAS_RGMII |
#endif
+#ifdef CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL
+ EMAC_FTR_NO_FLOW_CONTROL_40x |
+#endif
EMAC_FTR_460EX_PHY_CLK_FIX |
EMAC_FTR_440EP_PHY_CLK_FIX,
};
diff --git a/drivers/net/ibm_newemac/mal.c b/drivers/net/ibm_newemac/mal.c
index 10c267b..1839d3f 100644
--- a/drivers/net/ibm_newemac/mal.c
+++ b/drivers/net/ibm_newemac/mal.c
@@ -28,6 +28,7 @@
#include <linux/delay.h>
#include "core.h"
+#include <asm/dcr-regs.h>
static int mal_count;
@@ -279,6 +280,10 @@ static irqreturn_t mal_txeob(int irq, void *dev_instance)
mal_schedule_poll(mal);
set_mal_dcrn(mal, MAL_TXEOBISR, r);
+ if (mal_has_feature(mal, MAL_FTR_CLEAR_ICINTSTAT))
+ mtdcri(SDR0, DCRN_SDR_ICINTSTAT,
+ (mfdcri(SDR0, DCRN_SDR_ICINTSTAT) | ICINTSTAT_ICTX));
+
return IRQ_HANDLED;
}
@@ -293,6 +298,10 @@ static irqreturn_t mal_rxeob(int irq, void *dev_instance)
mal_schedule_poll(mal);
set_mal_dcrn(mal, MAL_RXEOBISR, r);
+ if (mal_has_feature(mal, MAL_FTR_CLEAR_ICINTSTAT))
+ mtdcri(SDR0, DCRN_SDR_ICINTSTAT,
+ (mfdcri(SDR0, DCRN_SDR_ICINTSTAT) | ICINTSTAT_ICRX));
+
return IRQ_HANDLED;
}
@@ -336,6 +345,25 @@ static irqreturn_t mal_rxde(int irq, void *dev_instance)
return IRQ_HANDLED;
}
+static irqreturn_t mal_int(int irq, void *dev_instance)
+{
+ struct mal_instance *mal = dev_instance;
+ u32 esr = get_mal_dcrn(mal, MAL_ESR);
+
+ if (esr & MAL_ESR_EVB) {
+ /* descriptor error */
+ if (esr & MAL_ESR_DE) {
+ if (esr & MAL_ESR_CIDT)
+ return mal_rxde(irq, dev_instance);
+ else
+ return mal_txde(irq, dev_instance);
+ } else { /* SERR */
+ return mal_serr(irq, dev_instance);
+ }
+ }
+ return IRQ_HANDLED;
+}
+
void mal_poll_disable(struct mal_instance *mal, struct mal_commac *commac)
{
/* Spinlock-type semantics: only one caller disable poll at a time */
@@ -493,6 +521,8 @@ static int __devinit mal_probe(struct of_device *ofdev,
unsigned int dcr_base;
const u32 *prop;
u32 cfg;
+ unsigned long irqflags;
+ irq_handler_t hdlr_serr, hdlr_txde, hdlr_rxde;
mal = kzalloc(sizeof(struct mal_instance), GFP_KERNEL);
if (!mal) {
@@ -542,11 +572,21 @@ static int __devinit mal_probe(struct of_device *ofdev,
goto fail;
}
+ if (of_device_is_compatible(ofdev->node, "ibm,mcmal-405ez"))
+ mal->features |= (MAL_FTR_CLEAR_ICINTSTAT |
+ MAL_FTR_COMMON_ERR_INT);
+
mal->txeob_irq = irq_of_parse_and_map(ofdev->node, 0);
mal->rxeob_irq = irq_of_parse_and_map(ofdev->node, 1);
mal->serr_irq = irq_of_parse_and_map(ofdev->node, 2);
- mal->txde_irq = irq_of_parse_and_map(ofdev->node, 3);
- mal->rxde_irq = irq_of_parse_and_map(ofdev->node, 4);
+
+ if (mal_has_feature(mal, MAL_FTR_COMMON_ERR_INT)) {
+ mal->txde_irq = mal->rxde_irq = mal->serr_irq;
+ } else {
+ mal->txde_irq = irq_of_parse_and_map(ofdev->node, 3);
+ mal->rxde_irq = irq_of_parse_and_map(ofdev->node, 4);
+ }
+
if (mal->txeob_irq == NO_IRQ || mal->rxeob_irq == NO_IRQ ||
mal->serr_irq == NO_IRQ || mal->txde_irq == NO_IRQ ||
mal->rxde_irq == NO_IRQ) {
@@ -608,16 +648,26 @@ static int __devinit mal_probe(struct of_device *ofdev,
sizeof(struct mal_descriptor) *
mal_rx_bd_offset(mal, i));
- err = request_irq(mal->serr_irq, mal_serr, 0, "MAL SERR", mal);
+ if (mal_has_feature(mal, MAL_FTR_COMMON_ERR_INT)) {
+ irqflags = IRQF_SHARED;
+ hdlr_serr = hdlr_txde = hdlr_rxde = mal_int;
+ } else {
+ irqflags = 0;
+ hdlr_serr = mal_serr;
+ hdlr_txde = mal_txde;
+ hdlr_rxde = mal_rxde;
+ }
+
+ err = request_irq(mal->serr_irq, hdlr_serr, irqflags, "MAL SERR", mal);
if (err)
goto fail2;
- err = request_irq(mal->txde_irq, mal_txde, 0, "MAL TX DE", mal);
+ err = request_irq(mal->txde_irq, hdlr_txde, irqflags, "MAL TX DE", mal);
if (err)
goto fail3;
err = request_irq(mal->txeob_irq, mal_txeob, 0, "MAL TX EOB", mal);
if (err)
goto fail4;
- err = request_irq(mal->rxde_irq, mal_rxde, 0, "MAL RX DE", mal);
+ err = request_irq(mal->rxde_irq, hdlr_rxde, irqflags, "MAL RX DE", mal);
if (err)
goto fail5;
err = request_irq(mal->rxeob_irq, mal_rxeob, 0, "MAL RX EOB", mal);
diff --git a/drivers/net/ibm_newemac/mal.h b/drivers/net/ibm_newemac/mal.h
index 717dc38..2f0a873 100644
--- a/drivers/net/ibm_newemac/mal.h
+++ b/drivers/net/ibm_newemac/mal.h
@@ -213,6 +213,8 @@ struct mal_instance {
struct of_device *ofdev;
int index;
spinlock_t lock;
+
+ unsigned int features;
};
static inline u32 get_mal_dcrn(struct mal_instance *mal, int reg)
@@ -225,6 +227,38 @@ static inline void set_mal_dcrn(struct mal_instance *mal, int reg, u32 val)
dcr_write(mal->dcr_host, reg, val);
}
+/* Features of various MAL implementations */
+
+/* Set if you have interrupt coalescing and you have to clear the SDR
+ * register for TXEOB and RXEOB interrupts to work
+ */
+#define MAL_FTR_CLEAR_ICINTSTAT 0x00000001
+
+/* Set if your MAL has SERR, TXDE, and RXDE OR'd into a single UIC
+ * interrupt
+ */
+#define MAL_FTR_COMMON_ERR_INT 0x00000002
+
+enum {
+ MAL_FTRS_ALWAYS = 0,
+
+ MAL_FTRS_POSSIBLE =
+#ifdef CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT
+ MAL_FTR_CLEAR_ICINTSTAT |
+#endif
+#ifdef CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR
+ MAL_FTR_COMMON_ERR_INT |
+#endif
+ 0,
+};
+
+static inline int mal_has_feature(struct mal_instance *dev,
+ unsigned long feature)
+{
+ return (MAL_FTRS_ALWAYS & feature) ||
+ (MAL_FTRS_POSSIBLE & dev->features & feature);
+}
+
/* Register MAL devices */
int mal_init(void);
void mal_exit(void);
diff --git a/drivers/net/ibm_newemac/phy.c b/drivers/net/ibm_newemac/phy.c
index 9164abb..c40cd8d 100644
--- a/drivers/net/ibm_newemac/phy.c
+++ b/drivers/net/ibm_newemac/phy.c
@@ -38,6 +38,16 @@ static inline void phy_write(struct mii_phy *phy, int reg, int val)
phy->mdio_write(phy->dev, phy->address, reg, val);
}
+static inline int gpcs_phy_read(struct mii_phy *phy, int reg)
+{
+ return phy->mdio_read(phy->dev, phy->gpcs_address, reg);
+}
+
+static inline void gpcs_phy_write(struct mii_phy *phy, int reg, int val)
+{
+ phy->mdio_write(phy->dev, phy->gpcs_address, reg, val);
+}
+
int emac_mii_reset_phy(struct mii_phy *phy)
{
int val;
@@ -62,6 +72,37 @@ int emac_mii_reset_phy(struct mii_phy *phy)
return limit <= 0;
}
+int emac_mii_reset_gpcs(struct mii_phy *phy)
+{
+ int val;
+ int limit = 10000;
+
+ val = gpcs_phy_read(phy, MII_BMCR);
+ val &= ~(BMCR_ISOLATE | BMCR_ANENABLE);
+ val |= BMCR_RESET;
+ gpcs_phy_write(phy, MII_BMCR, val);
+
+ udelay(300);
+
+ while (limit--) {
+ val = gpcs_phy_read(phy, MII_BMCR);
+ if (val >= 0 && (val & BMCR_RESET) == 0)
+ break;
+ udelay(10);
+ }
+ if ((val & BMCR_ISOLATE) && limit > 0)
+ gpcs_phy_write(phy, MII_BMCR, val & ~BMCR_ISOLATE);
+
+ if (limit > 0 && phy->mode == PHY_MODE_SGMII) {
+ /* Configure GPCS interface to recommended setting for SGMII */
+ gpcs_phy_write(phy, 0x04, 0x8120); /* AsymPause, FDX */
+ gpcs_phy_write(phy, 0x07, 0x2801); /* msg_pg, toggle */
+ gpcs_phy_write(phy, 0x00, 0x0140); /* 1Gbps, FDX */
+ }
+
+ return limit <= 0;
+}
+
static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise)
{
int ctl, adv;
@@ -332,6 +373,33 @@ static int m88e1111_init(struct mii_phy *phy)
return 0;
}
+static int m88e1112_init(struct mii_phy *phy)
+{
+ /*
+ * Marvell 88E1112 PHY needs to have the SGMII MAC
+ * interace (page 2) properly configured to
+ * communicate with the 460EX/GT GPCS interface.
+ */
+
+ u16 reg_short;
+
+ pr_debug("%s: Marvell 88E1112 Ethernet\n", __func__);
+
+ /* Set access to Page 2 */
+ phy_write(phy, 0x16, 0x0002);
+
+ phy_write(phy, 0x00, 0x0040); /* 1Gbps */
+ reg_short = (u16)(phy_read(phy, 0x1a));
+ reg_short |= 0x8000; /* bypass Auto-Negotiation */
+ phy_write(phy, 0x1a, reg_short);
+ emac_mii_reset_phy(phy); /* reset MAC interface */
+
+ /* Reset access to Page 0 */
+ phy_write(phy, 0x16, 0x0000);
+
+ return 0;
+}
+
static int et1011c_init(struct mii_phy *phy)
{
u16 reg_short;
@@ -384,11 +452,27 @@ static struct mii_phy_def m88e1111_phy_def = {
.ops = &m88e1111_phy_ops,
};
+static struct mii_phy_ops m88e1112_phy_ops = {
+ .init = m88e1112_init,
+ .setup_aneg = genmii_setup_aneg,
+ .setup_forced = genmii_setup_forced,
+ .poll_link = genmii_poll_link,
+ .read_link = genmii_read_link
+};
+
+static struct mii_phy_def m88e1112_phy_def = {
+ .phy_id = 0x01410C90,
+ .phy_id_mask = 0x0ffffff0,
+ .name = "Marvell 88E1112 Ethernet",
+ .ops = &m88e1112_phy_ops,
+};
+
static struct mii_phy_def *mii_phy_table[] = {
&et1011c_phy_def,
&cis8201_phy_def,
&bcm5248_phy_def,
&m88e1111_phy_def,
+ &m88e1112_phy_def,
&genmii_phy_def,
NULL
};
diff --git a/drivers/net/ibm_newemac/phy.h b/drivers/net/ibm_newemac/phy.h
index 1b65c81..5d2bf4c 100644
--- a/drivers/net/ibm_newemac/phy.h
+++ b/drivers/net/ibm_newemac/phy.h
@@ -57,6 +57,7 @@ struct mii_phy {
or determined automaticaly */
int address; /* PHY address */
int mode; /* PHY mode */
+ int gpcs_address; /* GPCS PHY address */
/* 1: autoneg enabled, 0: disabled */
int autoneg;
@@ -81,5 +82,6 @@ struct mii_phy {
*/
int emac_mii_phy_probe(struct mii_phy *phy, int address);
int emac_mii_reset_phy(struct mii_phy *phy);
+int emac_mii_reset_gpcs(struct mii_phy *phy);
#endif /* __IBM_NEWEMAC_PHY_H */
diff --git a/drivers/of/base.c b/drivers/of/base.c
index ad8ac1a..7c79e94 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -410,7 +410,7 @@ struct of_modalias_table {
char *modalias;
};
static struct of_modalias_table of_modalias_table[] = {
- /* Empty for now; add entries as needed */
+ { "fsl,mcu-mpc8349emitx", "mcu-mpc8349emitx" },
};
/**
@@ -420,13 +420,12 @@ static struct of_modalias_table of_modalias_table[] = {
* @len: Length of modalias value
*
* Based on the value of the compatible property, this routine will determine
- * an appropriate modalias value for a particular device tree node. Three
- * separate methods are used to derive a modalias value.
+ * an appropriate modalias value for a particular device tree node. Two
+ * separate methods are attempted to derive a modalias value.
*
* First method is to lookup the compatible value in of_modalias_table.
- * Second is to look for a "linux,<modalias>" entry in the compatible list
- * and used that for modalias. Third is to strip off the manufacturer
- * prefix from the first compatible entry and use the remainder as modalias
+ * Second is to strip off the manufacturer prefix from the first
+ * compatible entry and use the remainder as modalias
*
* This routine returns 0 on success
*/
@@ -449,21 +448,7 @@ int of_modalias_node(struct device_node *node, char *modalias, int len)
if (!compatible)
return -ENODEV;
- /* 2. search for linux,<modalias> entry */
- p = compatible;
- while (cplen > 0) {
- if (!strncmp(p, "linux,", 6)) {
- p += 6;
- strlcpy(modalias, p, len);
- return 0;
- }
-
- i = strlen(p) + 1;
- p += i;
- cplen -= i;
- }
-
- /* 3. take first compatible entry and strip manufacturer */
+ /* 2. take first compatible entry and strip manufacturer */
p = strchr(compatible, ',');
if (!p)
return -ENODEV;
@@ -473,3 +458,112 @@ int of_modalias_node(struct device_node *node, char *modalias, int len)
}
EXPORT_SYMBOL_GPL(of_modalias_node);
+/**
+ * of_parse_phandles_with_args - Find a node pointed by phandle in a list
+ * @np: pointer to a device tree node containing a list
+ * @list_name: property name that contains a list
+ * @cells_name: property name that specifies phandles' arguments count
+ * @index: index of a phandle to parse out
+ * @out_node: pointer to device_node struct pointer (will be filled)
+ * @out_args: pointer to arguments pointer (will be filled)
+ *
+ * This function is useful to parse lists of phandles and their arguments.
+ * Returns 0 on success and fills out_node and out_args, on error returns
+ * appropriate errno value.
+ *
+ * Example:
+ *
+ * phandle1: node1 {
+ * #list-cells = <2>;
+ * }
+ *
+ * phandle2: node2 {
+ * #list-cells = <1>;
+ * }
+ *
+ * node3 {
+ * list = <&phandle1 1 2 &phandle2 3>;
+ * }
+ *
+ * To get a device_node of the `node2' node you may call this:
+ * of_parse_phandles_with_args(node3, "list", "#list-cells", 2, &node2, &args);
+ */
+int of_parse_phandles_with_args(struct device_node *np, const char *list_name,
+ const char *cells_name, int index,
+ struct device_node **out_node,
+ const void **out_args)
+{
+ int ret = -EINVAL;
+ const u32 *list;
+ const u32 *list_end;
+ int size;
+ int cur_index = 0;
+ struct device_node *node = NULL;
+ const void *args;
+
+ list = of_get_property(np, list_name, &size);
+ if (!list) {
+ ret = -ENOENT;
+ goto err0;
+ }
+ list_end = list + size / sizeof(*list);
+
+ while (list < list_end) {
+ const u32 *cells;
+ const phandle *phandle;
+
+ phandle = list;
+ args = list + 1;
+
+ /* one cell hole in the list = <>; */
+ if (!*phandle) {
+ list++;
+ goto next;
+ }
+
+ node = of_find_node_by_phandle(*phandle);
+ if (!node) {
+ pr_debug("%s: could not find phandle\n",
+ np->full_name);
+ goto err0;
+ }
+
+ cells = of_get_property(node, cells_name, &size);
+ if (!cells || size != sizeof(*cells)) {
+ pr_debug("%s: could not get %s for %s\n",
+ np->full_name, cells_name, node->full_name);
+ goto err1;
+ }
+
+ /* Next phandle is at offset of one phandle cell + #cells */
+ list += 1 + *cells;
+ if (list > list_end) {
+ pr_debug("%s: insufficient arguments length\n",
+ np->full_name);
+ goto err1;
+ }
+next:
+ if (cur_index == index)
+ break;
+
+ of_node_put(node);
+ node = NULL;
+ cur_index++;
+ }
+
+ if (!node) {
+ ret = -ENOENT;
+ goto err0;
+ }
+
+ *out_node = node;
+ *out_args = args;
+
+ return 0;
+err1:
+ of_node_put(node);
+err0:
+ pr_debug("%s failed with status %d\n", __func__, ret);
+ return ret;
+}
+EXPORT_SYMBOL(of_parse_phandles_with_args);
diff --git a/drivers/of/gpio.c b/drivers/of/gpio.c
index 1c9cab8..7cd7301 100644
--- a/drivers/of/gpio.c
+++ b/drivers/of/gpio.c
@@ -28,78 +28,35 @@
*/
int of_get_gpio(struct device_node *np, int index)
{
- int ret = -EINVAL;
+ int ret;
struct device_node *gc;
struct of_gpio_chip *of_gc = NULL;
int size;
- const u32 *gpios;
- u32 nr_cells;
- int i;
const void *gpio_spec;
const u32 *gpio_cells;
- int gpio_index = 0;
- gpios = of_get_property(np, "gpios", &size);
- if (!gpios) {
- ret = -ENOENT;
+ ret = of_parse_phandles_with_args(np, "gpios", "#gpio-cells", index,
+ &gc, &gpio_spec);
+ if (ret) {
+ pr_debug("%s: can't parse gpios property\n", __func__);
goto err0;
}
- nr_cells = size / sizeof(u32);
-
- for (i = 0; i < nr_cells; gpio_index++) {
- const phandle *gpio_phandle;
-
- gpio_phandle = gpios + i;
- gpio_spec = gpio_phandle + 1;
-
- /* one cell hole in the gpios = <>; */
- if (!*gpio_phandle) {
- if (gpio_index == index)
- return -ENOENT;
- i++;
- continue;
- }
-
- gc = of_find_node_by_phandle(*gpio_phandle);
- if (!gc) {
- pr_debug("%s: could not find phandle for gpios\n",
- np->full_name);
- goto err0;
- }
-
- of_gc = gc->data;
- if (!of_gc) {
- pr_debug("%s: gpio controller %s isn't registered\n",
- np->full_name, gc->full_name);
- goto err1;
- }
-
- gpio_cells = of_get_property(gc, "#gpio-cells", &size);
- if (!gpio_cells || size != sizeof(*gpio_cells) ||
- *gpio_cells != of_gc->gpio_cells) {
- pr_debug("%s: wrong #gpio-cells for %s\n",
- np->full_name, gc->full_name);
- goto err1;
- }
-
- /* Next phandle is at phandle cells + #gpio-cells */
- i += sizeof(*gpio_phandle) / sizeof(u32) + *gpio_cells;
- if (i >= nr_cells + 1) {
- pr_debug("%s: insufficient gpio-spec length\n",
- np->full_name);
- goto err1;
- }
-
- if (gpio_index == index)
- break;
-
- of_gc = NULL;
- of_node_put(gc);
- }
+ of_gc = gc->data;
if (!of_gc) {
- ret = -ENOENT;
- goto err0;
+ pr_debug("%s: gpio controller %s isn't registered\n",
+ np->full_name, gc->full_name);
+ ret = -ENODEV;
+ goto err1;
+ }
+
+ gpio_cells = of_get_property(gc, "#gpio-cells", &size);
+ if (!gpio_cells || size != sizeof(*gpio_cells) ||
+ *gpio_cells != of_gc->gpio_cells) {
+ pr_debug("%s: wrong #gpio-cells for %s\n",
+ np->full_name, gc->full_name);
+ ret = -EINVAL;
+ goto err1;
}
ret = of_gc->xlate(of_gc, np, gpio_spec);
diff --git a/drivers/pci/hotplug/rpaphp_slot.c b/drivers/pci/hotplug/rpaphp_slot.c
index 9b714ea..5088450 100644
--- a/drivers/pci/hotplug/rpaphp_slot.c
+++ b/drivers/pci/hotplug/rpaphp_slot.c
@@ -147,9 +147,5 @@ int rpaphp_register_slot(struct slot *slot)
list_add(&slot->rpaphp_slot_list, &rpaphp_slot_head);
info("Slot [%s] registered\n", slot->name);
return 0;
-
-sysfs_fail:
- pci_hp_deregister(php_slot);
- return retval;
}
diff --git a/drivers/pnp/isapnp/core.c b/drivers/pnp/isapnp/core.c
index 101a835..46455fba 100644
--- a/drivers/pnp/isapnp/core.c
+++ b/drivers/pnp/isapnp/core.c
@@ -1012,7 +1012,7 @@ static int __init isapnp_init(void)
printk(KERN_INFO "isapnp: ISA Plug & Play support disabled\n");
return 0;
}
-#ifdef CONFIG_PPC_MERGE
+#ifdef CONFIG_PPC
if (check_legacy_ioport(_PIDXR) || check_legacy_ioport(_PNPWRP))
return -EINVAL;
#endif
diff --git a/drivers/pnp/pnpbios/core.c b/drivers/pnp/pnpbios/core.c
index 662dfcdd..2bfe133 100644
--- a/drivers/pnp/pnpbios/core.c
+++ b/drivers/pnp/pnpbios/core.c
@@ -519,7 +519,7 @@ static int __init pnpbios_init(void)
{
int ret;
-#if defined(CONFIG_PPC_MERGE)
+#if defined(CONFIG_PPC)
if (check_legacy_ioport(PNPBIOS_BASE))
return -ENODEV;
#endif
@@ -577,7 +577,7 @@ static int __init pnpbios_thread_init(void)
{
struct task_struct *task;
-#if defined(CONFIG_PPC_MERGE)
+#if defined(CONFIG_PPC)
if (check_legacy_ioport(PNPBIOS_BASE))
return 0;
#endif
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 31786b3..db783b7 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -1123,42 +1123,6 @@ config SERIAL_CPM_CONSOLE
your boot loader (lilo or loadlin) about how to pass options to the
kernel at boot time.)
-config SERIAL_CPM_SCC1
- bool "Support for SCC1 serial port"
- depends on SERIAL_CPM=y
- help
- Select this option to use SCC1 as a serial port
-
-config SERIAL_CPM_SCC2
- bool "Support for SCC2 serial port"
- depends on SERIAL_CPM=y
- help
- Select this option to use SCC2 as a serial port
-
-config SERIAL_CPM_SCC3
- bool "Support for SCC3 serial port"
- depends on SERIAL_CPM=y
- help
- Select this option to use SCC3 as a serial port
-
-config SERIAL_CPM_SCC4
- bool "Support for SCC4 serial port"
- depends on SERIAL_CPM=y
- help
- Select this option to use SCC4 as a serial port
-
-config SERIAL_CPM_SMC1
- bool "Support for SMC1 serial port"
- depends on SERIAL_CPM=y
- help
- Select this option to use SMC1 as a serial port
-
-config SERIAL_CPM_SMC2
- bool "Support for SMC2 serial port"
- depends on SERIAL_CPM=y
- help
- Select this option to use SMC2 as a serial port
-
config SERIAL_SGI_L1_CONSOLE
bool "SGI Altix L1 serial console support"
depends on IA64_GENERIC || IA64_SGI_SN2
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index 25efca5..a6c4d74 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -1333,6 +1333,9 @@ static int __devinit cpm_uart_probe(struct of_device *ofdev,
if (ret)
return ret;
+ /* initialize the device pointer for the port */
+ pinfo->port.dev = &ofdev->dev;
+
return uart_add_one_port(&cpm_reg, &pinfo->port);
}
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
index 0f0aff0..1b94c56 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
@@ -100,7 +100,7 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
mem_addr = (u8 *) cpm_dpram_addr(cpm_dpalloc(memsz, 8));
dma_addr = (u32)cpm_dpram_phys(mem_addr);
} else
- mem_addr = dma_alloc_coherent(NULL, memsz, &dma_addr,
+ mem_addr = dma_alloc_coherent(pinfo->port.dev, memsz, &dma_addr,
GFP_KERNEL);
if (mem_addr == NULL) {
@@ -127,8 +127,8 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
void cpm_uart_freebuf(struct uart_cpm_port *pinfo)
{
- dma_free_coherent(NULL, L1_CACHE_ALIGN(pinfo->rx_nrfifos *
- pinfo->rx_fifosize) +
+ dma_free_coherent(pinfo->port.dev, L1_CACHE_ALIGN(pinfo->rx_nrfifos *
+ pinfo->rx_fifosize) +
L1_CACHE_ALIGN(pinfo->tx_nrfifos *
pinfo->tx_fifosize), pinfo->mem_addr,
pinfo->dma_addr);
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
index b8db4d3..141c0a3 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
@@ -136,7 +136,7 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
dma_addr = virt_to_bus(mem_addr);
}
else
- mem_addr = dma_alloc_coherent(NULL, memsz, &dma_addr,
+ mem_addr = dma_alloc_coherent(pinfo->port.dev, memsz, &dma_addr,
GFP_KERNEL);
if (mem_addr == NULL) {
@@ -163,8 +163,8 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
void cpm_uart_freebuf(struct uart_cpm_port *pinfo)
{
- dma_free_coherent(NULL, L1_CACHE_ALIGN(pinfo->rx_nrfifos *
- pinfo->rx_fifosize) +
+ dma_free_coherent(pinfo->port.dev, L1_CACHE_ALIGN(pinfo->rx_nrfifos *
+ pinfo->rx_fifosize) +
L1_CACHE_ALIGN(pinfo->tx_nrfifos *
pinfo->tx_fifosize), (void __force *)pinfo->mem_addr,
pinfo->dma_addr);
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 3612607..6117d3d 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -72,13 +72,8 @@
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/io.h>
-
-#if defined(CONFIG_PPC_MERGE)
#include <linux/of.h>
#include <linux/of_platform.h>
-#else
-#include <linux/platform_device.h>
-#endif
#include <asm/mpc52xx.h>
#include <asm/mpc512x.h>
@@ -107,12 +102,11 @@ static struct uart_port mpc52xx_uart_ports[MPC52xx_PSC_MAXNUM];
* it's cleared, then a memset(...,0,...) should be added to
* the console_init
*/
-#if defined(CONFIG_PPC_MERGE)
+
/* lookup table for matching device nodes to index numbers */
static struct device_node *mpc52xx_uart_nodes[MPC52xx_PSC_MAXNUM];
static void mpc52xx_uart_of_enumerate(void);
-#endif
#define PSC(port) ((struct mpc52xx_psc __iomem *)((port)->membase))
@@ -255,17 +249,12 @@ static void mpc52xx_psc_cw_restore_ints(struct uart_port *port)
/* Search for bus-frequency property in this node or a parent */
static unsigned long mpc52xx_getuartclk(void *p)
{
-#if defined(CONFIG_PPC_MERGE)
/*
* 5200 UARTs have a / 32 prescaler
* but the generic serial code assumes 16
* so return ipb freq / 2
*/
return mpc52xx_find_ipb_freq(p) / 2;
-#else
- pr_debug("unexpected call to mpc52xx_getuartclk with arch/ppc\n");
- return NULL;
-#endif
}
static struct psc_ops mpc52xx_psc_ops = {
@@ -886,10 +875,6 @@ mpc52xx_console_get_options(struct uart_port *port,
/* CT{U,L}R are write-only ! */
*baud = CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD;
-#if !defined(CONFIG_PPC_MERGE)
- if (__res.bi_baudrate)
- *baud = __res.bi_baudrate;
-#endif
/* Parse them */
switch (mr1 & MPC52xx_PSC_MODE_BITS_MASK) {
@@ -946,42 +931,6 @@ mpc52xx_console_write(struct console *co, const char *s, unsigned int count)
psc_ops->cw_restore_ints(port);
}
-#if !defined(CONFIG_PPC_MERGE)
-static int __init
-mpc52xx_console_setup(struct console *co, char *options)
-{
- struct uart_port *port = &mpc52xx_uart_ports[co->index];
-
- int baud = CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD;
- int bits = 8;
- int parity = 'n';
- int flow = 'n';
-
- if (co->index < 0 || co->index >= MPC52xx_PSC_MAXNUM)
- return -EINVAL;
-
- /* Basic port init. Needed since we use some uart_??? func before
- * real init for early access */
- spin_lock_init(&port->lock);
- port->uartclk = __res.bi_ipbfreq / 2; /* Look at CTLR doc */
- port->ops = &mpc52xx_uart_ops;
- port->mapbase = MPC52xx_PA(MPC52xx_PSCx_OFFSET(co->index+1));
-
- /* We ioremap ourself */
- port->membase = ioremap(port->mapbase, MPC52xx_PSC_SIZE);
- if (port->membase == NULL)
- return -EINVAL;
-
- /* Setup the port parameters accoding to options */
- if (options)
- uart_parse_options(options, &baud, &parity, &bits, &flow);
- else
- mpc52xx_console_get_options(port, &baud, &parity, &bits, &flow);
-
- return uart_set_options(port, co, baud, parity, bits, flow);
-}
-
-#else
static int __init
mpc52xx_console_setup(struct console *co, char *options)
@@ -1053,7 +1002,6 @@ mpc52xx_console_setup(struct console *co, char *options)
return uart_set_options(port, co, baud, parity, bits, flow);
}
-#endif /* defined(CONFIG_PPC_MERGE) */
static struct uart_driver mpc52xx_uart_driver;
@@ -1072,9 +1020,7 @@ static struct console mpc52xx_console = {
static int __init
mpc52xx_console_init(void)
{
-#if defined(CONFIG_PPC_MERGE)
mpc52xx_uart_of_enumerate();
-#endif
register_console(&mpc52xx_console);
return 0;
}
@@ -1100,115 +1046,6 @@ static struct uart_driver mpc52xx_uart_driver = {
.cons = MPC52xx_PSC_CONSOLE,
};
-
-#if !defined(CONFIG_PPC_MERGE)
-/* ======================================================================== */
-/* Platform Driver */
-/* ======================================================================== */
-
-static int __devinit
-mpc52xx_uart_probe(struct platform_device *dev)
-{
- struct resource *res = dev->resource;
-
- struct uart_port *port = NULL;
- int i, idx, ret;
-
- /* Check validity & presence */
- idx = dev->id;
- if (idx < 0 || idx >= MPC52xx_PSC_MAXNUM)
- return -EINVAL;
-
- if (!mpc52xx_match_psc_function(idx, "uart"))
- return -ENODEV;
-
- /* Init the port structure */
- port = &mpc52xx_uart_ports[idx];
-
- spin_lock_init(&port->lock);
- port->uartclk = __res.bi_ipbfreq / 2; /* Look at CTLR doc */
- port->fifosize = 512;
- port->iotype = UPIO_MEM;
- port->flags = UPF_BOOT_AUTOCONF |
- (uart_console(port) ? 0 : UPF_IOREMAP);
- port->line = idx;
- port->ops = &mpc52xx_uart_ops;
- port->dev = &dev->dev;
-
- /* Search for IRQ and mapbase */
- for (i = 0 ; i < dev->num_resources ; i++, res++) {
- if (res->flags & IORESOURCE_MEM)
- port->mapbase = res->start;
- else if (res->flags & IORESOURCE_IRQ)
- port->irq = res->start;
- }
- if (!port->irq || !port->mapbase)
- return -EINVAL;
-
- /* Add the port to the uart sub-system */
- ret = uart_add_one_port(&mpc52xx_uart_driver, port);
- if (!ret)
- platform_set_drvdata(dev, (void *)port);
-
- return ret;
-}
-
-static int
-mpc52xx_uart_remove(struct platform_device *dev)
-{
- struct uart_port *port = (struct uart_port *) platform_get_drvdata(dev);
-
- platform_set_drvdata(dev, NULL);
-
- if (port)
- uart_remove_one_port(&mpc52xx_uart_driver, port);
-
- return 0;
-}
-
-#ifdef CONFIG_PM
-static int
-mpc52xx_uart_suspend(struct platform_device *dev, pm_message_t state)
-{
- struct uart_port *port = (struct uart_port *) platform_get_drvdata(dev);
-
- if (port)
- uart_suspend_port(&mpc52xx_uart_driver, port);
-
- return 0;
-}
-
-static int
-mpc52xx_uart_resume(struct platform_device *dev)
-{
- struct uart_port *port = (struct uart_port *) platform_get_drvdata(dev);
-
- if (port)
- uart_resume_port(&mpc52xx_uart_driver, port);
-
- return 0;
-}
-#endif
-
-/* work with hotplug and coldplug */
-MODULE_ALIAS("platform:mpc52xx-psc");
-
-static struct platform_driver mpc52xx_uart_platform_driver = {
- .probe = mpc52xx_uart_probe,
- .remove = mpc52xx_uart_remove,
-#ifdef CONFIG_PM
- .suspend = mpc52xx_uart_suspend,
- .resume = mpc52xx_uart_resume,
-#endif
- .driver = {
- .owner = THIS_MODULE,
- .name = "mpc52xx-psc",
- },
-};
-#endif /* !defined(CONFIG_PPC_MERGE) */
-
-
-#if defined(CONFIG_PPC_MERGE)
/* ======================================================================== */
/* OF Platform Driver */
/* ======================================================================== */
@@ -1402,7 +1239,6 @@ static struct of_platform_driver mpc52xx_uart_of_driver = {
.name = "mpc52xx-psc-uart",
},
};
-#endif /* defined(CONFIG_PPC_MERGE) */
/* ======================================================================== */
@@ -1423,7 +1259,6 @@ mpc52xx_uart_init(void)
return ret;
}
-#if defined(CONFIG_PPC_MERGE)
mpc52xx_uart_of_enumerate();
ret = of_register_platform_driver(&mpc52xx_uart_of_driver);
@@ -1433,16 +1268,6 @@ mpc52xx_uart_init(void)
uart_unregister_driver(&mpc52xx_uart_driver);
return ret;
}
-#else
- psc_ops = &mpc52xx_psc_ops;
- ret = platform_driver_register(&mpc52xx_uart_platform_driver);
- if (ret) {
- printk(KERN_ERR "%s: platform_driver_register failed (%i)\n",
- __FILE__, ret);
- uart_unregister_driver(&mpc52xx_uart_driver);
- return ret;
- }
-#endif
return 0;
}
@@ -1450,11 +1275,7 @@ mpc52xx_uart_init(void)
static void __exit
mpc52xx_uart_exit(void)
{
-#if defined(CONFIG_PPC_MERGE)
of_unregister_platform_driver(&mpc52xx_uart_of_driver);
-#else
- platform_driver_unregister(&mpc52xx_uart_platform_driver);
-#endif
uart_unregister_driver(&mpc52xx_uart_driver);
}
diff --git a/drivers/serial/ucc_uart.c b/drivers/serial/ucc_uart.c
index 5c5d18d..539c933 100644
--- a/drivers/serial/ucc_uart.c
+++ b/drivers/serial/ucc_uart.c
@@ -1009,7 +1009,7 @@ static int qe_uart_request_port(struct uart_port *port)
rx_size = L1_CACHE_ALIGN(qe_port->rx_nrfifos * qe_port->rx_fifosize);
tx_size = L1_CACHE_ALIGN(qe_port->tx_nrfifos * qe_port->tx_fifosize);
- bd_virt = dma_alloc_coherent(NULL, rx_size + tx_size, &bd_dma_addr,
+ bd_virt = dma_alloc_coherent(port->dev, rx_size + tx_size, &bd_dma_addr,
GFP_KERNEL);
if (!bd_virt) {
dev_err(port->dev, "could not allocate buffer descriptors\n");
@@ -1051,7 +1051,7 @@ static void qe_uart_release_port(struct uart_port *port)
container_of(port, struct uart_qe_port, port);
struct ucc_slow_private *uccs = qe_port->us_private;
- dma_free_coherent(NULL, qe_port->bd_size, qe_port->bd_virt,
+ dma_free_coherent(port->dev, qe_port->bd_size, qe_port->bd_virt,
qe_port->bd_dma_addr);
ucc_slow_free(uccs);
diff --git a/drivers/spi/mpc52xx_psc_spi.c b/drivers/spi/mpc52xx_psc_spi.c
index 25eda71..cdb3d31 100644
--- a/drivers/spi/mpc52xx_psc_spi.c
+++ b/drivers/spi/mpc52xx_psc_spi.c
@@ -108,13 +108,13 @@ static void mpc52xx_psc_spi_activate_cs(struct spi_device *spi)
* Because psc->ccr is defined as 16bit register instead of 32bit
* just set the lower byte of BitClkDiv
*/
- ccr = in_be16(&psc->ccr);
+ ccr = in_be16((u16 __iomem *)&psc->ccr);
ccr &= 0xFF00;
if (cs->speed_hz)
ccr |= (MCLK / cs->speed_hz - 1) & 0xFF;
else /* by default SPI Clk 1MHz */
ccr |= (MCLK / 1000000 - 1) & 0xFF;
- out_be16(&psc->ccr, ccr);
+ out_be16((u16 __iomem *)&psc->ccr, ccr);
mps->bits_per_word = cs->bits_per_word;
if (mps->activate_cs)
@@ -347,7 +347,7 @@ static int mpc52xx_psc_spi_port_config(int psc_id, struct mpc52xx_psc_spi *mps)
/* Configure 8bit codec mode as a SPI master and use EOF flags */
/* SICR_SIM_CODEC8|SICR_GENCLK|SICR_SPI|SICR_MSTR|SICR_USEEOF */
out_be32(&psc->sicr, 0x0180C800);
- out_be16(&psc->ccr, 0x070F); /* by default SPI Clk 1MHz */
+ out_be16((u16 __iomem *)&psc->ccr, 0x070F); /* default SPI Clk 1MHz */
/* Set 2ms DTL delay */
out_8(&psc->ctur, 0x00);
OpenPOWER on IntegriCloud