scripts/spelling.txt: add "aligment" pattern and fix typo instances

Fix typos and add the following to the scripts/spelling.txt:

  aligment||alignment

I did not touch the "N_BYTE_ALIGMENT" macro in
drivers/net/wireless/realtek/rtlwifi/wifi.h to avoid unpredictable
impact.

I fixed "_aligment_handler" in arch/openrisc/kernel/entry.S because
it is surrounded by #if 0 ... #endif.  It is surely safe and I
confirmed "_alignment_handler" is correct.

I also fixed the "controler" I found in the same hunk in
arch/openrisc/kernel/head.S.

Link: http://lkml.kernel.org/r/1481573103-11329-8-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 files changed, 12 insertions, 12 deletions

diff --git a/drivers/gpu/drm/amd/include/atombios.h b/drivers/gpu/drm/amd/include/atombios.h
index 9f970b5..181a2c3 100644
--- a/drivers/gpu/drm/amd/include/atombios.h
+++ b/drivers/gpu/drm/amd/include/atombios.h
@@ -188,7 +188,7 @@
 #define HW_ASSISTED_I2C_STATUS_FAILURE     2
 #define HW_ASSISTED_I2C_STATUS_SUCCESS     1
 
-#pragma pack(1)                                       // BIOS data must use byte aligment
+#pragma pack(1)                                       // BIOS data must use byte alignment
 
 // Define offset to location of ROM header.
 #define OFFSET_TO_POINTER_TO_ATOM_ROM_HEADER         0x00000048L
@@ -9180,7 +9180,7 @@ typedef struct  _ATOM_POWERPLAY_INFO_V3
 
 /*********************************************************************************/
 
-#pragma pack() // BIOS data must use byte aligment
+#pragma pack() // BIOS data must use byte alignment
 
 #pragma pack(1)
 
@@ -9211,7 +9211,7 @@ typedef struct _ATOM_SERVICE_INFO
 
 
 
-#pragma pack() // BIOS data must use byte aligment
+#pragma pack() // BIOS data must use byte alignment
 
 //
 // AMD ACPI Table
diff --git a/drivers/gpu/drm/i915/i915_gem_render_state.c b/drivers/gpu/drm/i915/i915_gem_render_state.c
index b42c81b..7032c54 100644
--- a/drivers/gpu/drm/i915/i915_gem_render_state.c
+++ b/drivers/gpu/drm/i915/i915_gem_render_state.c
@@ -60,7 +60,7 @@ render_state_get_rodata(const struct intel_engine_cs *engine)
  * this is sufficient as the null state generator makes the final batch
  * with two passes to build command and state separately. At this point
  * the size of both are known and it compacts them by relocating the state
- * right after the commands taking care of aligment so we should sufficient
+ * right after the commands taking care of alignment so we should sufficient
  * space below them for adding new commands.
  */
 #define OUT_BATCH(batch, i, val)				\
diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h
index 66a2642..4b86e8b 100644
--- a/drivers/gpu/drm/radeon/atombios.h
+++ b/drivers/gpu/drm/radeon/atombios.h
@@ -181,7 +181,7 @@
 #define HW_ASSISTED_I2C_STATUS_FAILURE          2
 #define HW_ASSISTED_I2C_STATUS_SUCCESS          1
 
-#pragma pack(1)                                       /* BIOS data must use byte aligment */
+#pragma pack(1)                                       /* BIOS data must use byte alignment */
 
 /*  Define offset to location of ROM header. */
 
@@ -7909,7 +7909,7 @@ typedef struct  _ATOM_POWERPLAY_INFO_V3
 
 /*********************************************************************************/
 
-#pragma pack() // BIOS data must use byte aligment
+#pragma pack() // BIOS data must use byte alignment
 
 //
 // AMD ACPI Table
diff --git a/drivers/media/platform/exynos4-is/fimc-core.h b/drivers/media/platform/exynos4-is/fimc-core.h
index 5615fef..c0373ae 100644
--- a/drivers/media/platform/exynos4-is/fimc-core.h
+++ b/drivers/media/platform/exynos4-is/fimc-core.h
@@ -358,7 +358,7 @@ struct fimc_pix_limit {
  * @pix_limit: pixel size constraints for the scaler
  * @min_inp_pixsize: minimum input pixel size
  * @min_out_pixsize: minimum output pixel size
- * @hor_offs_align: horizontal pixel offset aligment
+ * @hor_offs_align: horizontal pixel offset alignment
  * @min_vsize_align: minimum vertical pixel size alignment
  */
 struct fimc_variant {
diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c
index 815efe9..5214dd7 100644
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -59,13 +59,13 @@ static const struct ani_ofdm_level_entry ofdm_level_table[] = {
 /*
  * MRC (Maximal Ratio Combining) has always been used with multi-antenna ofdm.
  * With OFDM for single stream you just add up all antenna inputs, you're
- * only interested in what you get after FFT. Signal aligment is also not
+ * only interested in what you get after FFT. Signal alignment is also not
  * required for OFDM because any phase difference adds up in the frequency
  * domain.
  *
  * MRC requires extra work for use with CCK. You need to align the antenna
  * signals from the different antenna before you can add the signals together.
- * You need aligment of signals as CCK is in time domain, so addition can cancel
+ * You need alignment of signals as CCK is in time domain, so addition can cancel
  * your signal completely if phase is 180 degrees (think of adding sine waves).
  * You also need to remove noise before the addition and this is where ANI
  * MRC CCK comes into play. One of the antenna inputs may be stronger but
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c
index 1922e78..89a0a28 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c
@@ -455,7 +455,7 @@ static u32 _rtl92s_fill_h2c_cmd(struct sk_buff *skb, u32 h2cbufferlen,
 	u8 i = 0;
 
 	do {
-		/* 8 - Byte aligment */
+		/* 8 - Byte alignment */
 		len = H2C_TX_CMD_HDR_LEN + N_BYTE_ALIGMENT(pcmd_len[i], 8);
 
 		/* Buffer length is not enough */
@@ -504,7 +504,7 @@ static u32 _rtl92s_get_h2c_cmdlen(u32 h2cbufferlen, u32 cmd_num, u32 *pcmd_len)
 	u8 i = 0;
 
 	do {
-		/* 8 - Byte aligment */
+		/* 8 - Byte alignment */
 		len = H2C_TX_CMD_HDR_LEN + N_BYTE_ALIGMENT(pcmd_len[i], 8);
 
 		/* Buffer length is not enough */
diff --git a/drivers/scsi/bfa/bfi_ms.h b/drivers/scsi/bfa/bfi_ms.h
index ae5bfe0..ccbd9e3 100644
--- a/drivers/scsi/bfa/bfi_ms.h
+++ b/drivers/scsi/bfa/bfi_ms.h
@@ -680,7 +680,7 @@ struct bfi_ioim_req_s {
 
 	/*
 	 * SG elements array within the IO request must be double word
-	 * aligned. This aligment is required to optimize SGM setup for the IO.
+	 * aligned. This alignment is required to optimize SGM setup for the IO.
 	 */
 	struct bfi_sge_s	sges[BFI_SGE_INLINE_MAX];
 	u8	io_timeout;