summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorMatt Carlson <mcarlson@broadcom.com>2009-11-02 14:31:39 +0000
committerDavid S. Miller <davem@davemloft.net>2009-11-02 23:39:13 -0800
commit32e5a8d651c0dbb02bf82ca954206282e44c4b11 (patch)
tree7d8508afb30951c46e3e1edab56f9e664e833275 /drivers
parentcdd4e09d692bd4f3457b3789279005e112b7696d (diff)
downloadop-kernel-dev-32e5a8d651c0dbb02bf82ca954206282e44c4b11.zip
op-kernel-dev-32e5a8d651c0dbb02bf82ca954206282e44c4b11.tar.gz
tg3 / broadcom: Add code to disable rxc refclk
The 5785 does not use the RXC reference clock. Turning it off is desirable as it saves power. By default, the 50610 enables the RXC reference clock and the 50610M disables it. Presumably this is one of the reasons why the hardware architect chose one over the other. Adding a "rx reference clock disable" flag is not the ideal way to describe the option, as it would force the MAC using a 50610M to set the flag. Ideally we want the flags to represent opt-in behavior that deviates from hardware defaults. Furthermore, the lack of a "disable" flag implies that the requester wants the rx reference clock enabled, which doesn't necessarily follow. By presenting the option as a passive statement (rx reference clock unused) rather than a command, I hope to convey an opt-in option to disable the rx reference clock that falls back to hardware defaults if not set. A secondary benefit of this is that it keeps the intelligence about phy defaults in the broadcom module where it belongs and allows the broadcom module more latitude should a bug arise. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/net/phy/broadcom.c43
-rw-r--r--drivers/net/tg3.c3
2 files changed, 45 insertions, 1 deletions
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index bddf4a4..7491433 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -25,6 +25,9 @@
#define BRCM_PHY_MODEL(phydev) \
((phydev)->drv->phy_id & (phydev)->drv->phy_id_mask)
+#define BRCM_PHY_REV(phydev) \
+ ((phydev)->drv->phy_id & ~((phydev)->drv->phy_id_mask))
+
#define MII_BCM54XX_ECR 0x10 /* BCM54xx extended control register */
#define MII_BCM54XX_ECR_IM 0x1000 /* Interrupt mask */
@@ -95,11 +98,16 @@
#define BCM_LED_SRC_OFF 0xe /* Tied high */
#define BCM_LED_SRC_ON 0xf /* Tied low */
+
/*
* BCM5482: Shadow registers
* Shadow values go into bits [14:10] of register 0x1c to select a shadow
* register to access.
*/
+/* 00101: Spare Control Register 3 */
+#define BCM54XX_SHD_SCR3 0x05
+#define BCM54XX_SHD_SCR3_DEF_CLK125 0x0001
+
#define BCM5482_SHD_LEDS1 0x0d /* 01101: LED Selector 1 */
/* LED3 / ~LINKSPD[2] selector */
#define BCM5482_SHD_LEDS1_LED3(src) ((src & 0xf) << 4)
@@ -112,6 +120,7 @@
#define BCM5482_SHD_MODE 0x1f /* 11111: Mode Control Register */
#define BCM5482_SHD_MODE_1000BX 0x0001 /* Enable 1000BASE-X registers */
+
/*
* EXPANSION SHADOW ACCESS REGISTERS. (PHY REG 0x15, 0x16, and 0x17)
*/
@@ -309,6 +318,37 @@ error:
return err ? err : err2;
}
+static void bcm54xx_adjust_rxrefclk(struct phy_device *phydev)
+{
+ u32 val, orig;
+
+ /* Abort if we are using an untested phy. */
+ if (BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610 ||
+ BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610M)
+ return;
+
+ val = bcm54xx_shadow_read(phydev, BCM54XX_SHD_SCR3);
+ if (val < 0)
+ return;
+
+ orig = val;
+
+ if (phydev->dev_flags & PHY_BRCM_RX_REFCLK_UNUSED) {
+ if ((BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610 ||
+ BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610M) &&
+ BRCM_PHY_REV(phydev) >= 0x3) {
+ /* Here, bit 0 _disables_ CLK125 when set */
+ val |= BCM54XX_SHD_SCR3_DEF_CLK125;
+ } else {
+ /* Here, bit 0 _enables_ CLK125 when set */
+ val &= ~BCM54XX_SHD_SCR3_DEF_CLK125;
+ }
+ }
+
+ if (orig != val)
+ bcm54xx_shadow_write(phydev, BCM54XX_SHD_SCR3, val);
+}
+
static int bcm54xx_config_init(struct phy_device *phydev)
{
int reg, err;
@@ -336,6 +376,9 @@ static int bcm54xx_config_init(struct phy_device *phydev)
(phydev->dev_flags & PHY_BRCM_CLEAR_RGMII_MODE))
bcm54xx_shadow_write(phydev, BCM54XX_SHD_RGMII_MODE, 0);
+ if (phydev->dev_flags & PHY_BRCM_RX_REFCLK_UNUSED)
+ bcm54xx_adjust_rxrefclk(phydev);
+
bcm54xx_phydsp_config(phydev);
return 0;
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 592b5bf..369ddba 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -1100,7 +1100,8 @@ static int tg3_mdio_init(struct tg3 *tp)
break;
case TG3_PHY_ID_BCM50610:
case TG3_PHY_ID_BCM50610M:
- phydev->dev_flags |= PHY_BRCM_CLEAR_RGMII_MODE;
+ phydev->dev_flags |= PHY_BRCM_CLEAR_RGMII_MODE |
+ PHY_BRCM_RX_REFCLK_UNUSED;
if (tp->tg3_flags3 & TG3_FLG3_RGMII_STD_IBND_DISABLE)
phydev->dev_flags |= PHY_BRCM_STD_IBND_DISABLE;
if (tp->tg3_flags3 & TG3_FLG3_RGMII_EXT_IBND_RX_EN)
OpenPOWER on IntegriCloud