diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2016-01-14 11:25:37 -0800 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2016-01-14 11:25:37 -0800 |
commit | 32250e4a5fa0b618044afa59fba01093a4bcb14a (patch) | |
tree | 678461393befc77b25e8d68cb637529927d3c284 /drivers | |
parent | 5339f9d4c2ceccab00b28d65bd5c2b2cd6a3de05 (diff) | |
parent | c698d639f72b55686ec3518d2bc8dc5f2eca9354 (diff) | |
download | op-kernel-dev-32250e4a5fa0b618044afa59fba01093a4bcb14a.zip op-kernel-dev-32250e4a5fa0b618044afa59fba01093a4bcb14a.tar.gz |
Merge branch 'i2c/for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"Quite some driver updates:
- piix4 can now handle multiplexed adapters
- brcmstb, xlr, eg20t, designware drivers support more SoCs
- emev2 gained i2c slave support
- img-scb and rcar got bigger refactoring to remove issues
- lots of common driver updates
i2c core changes:
- new quirk flag when an adapter does not support clock stretching,
so clients can be configured to avoid that if possible
- added a helper function to retrieve timing parameters from firmware
(with rcar being the first user)
- "multi-master" DT binding added so drivers can adapt to this
setting (like disabling PM to keep arbitration working)
- RuntimePM for the logical adapter device is now always enabled by
the core to ensure propagation from childs to the parent (the HW
device)
- new macro builtin_i2c_driver to reduce boilerplate"
* 'i2c/for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (70 commits)
i2c: create builtin_i2c_driver to avoid registration boilerplate
i2c: imx: fix i2c resource leak with dma transfer
dt-bindings: i2c: eeprom: add another EEPROM device
dt-bindings: move I2C eeprom descriptions to the proper file
i2c: designware: Do not require clock when SSCN and FFCN are provided
DT: i2c: trivial-devices: Add Epson RX8010 and MPL3115
i2c: s3c2410: remove superfluous runtime PM calls
i2c: always enable RuntimePM for the adapter device
i2c: designware: retry transfer on transient failure
i2c: ibm_iic: rename i2c_timings struct due to clash with generic version
i2c: designware: Add support for AMD Seattle I2C
i2c: imx: Remove unneeded comments
i2c: st: use to_platform_device()
i2c: designware: use to_pci_dev()
i2c: brcmstb: Adding support for CM and DSL SoCs
i2c: mediatek: fix i2c multi transfer issue in high speed mode
i2c: imx: improve code readability
i2c: imx: Improve message log when DMA is not used
i2c: imx: add runtime pm support to improve the performance
i2c: imx: init bus recovery info before adding i2c adapter
...
Diffstat (limited to 'drivers')
25 files changed, 1148 insertions, 392 deletions
diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c index 899bede..9d233bb 100644 --- a/drivers/i2c/algos/i2c-algo-bit.c +++ b/drivers/i2c/algos/i2c-algo-bit.c @@ -617,6 +617,10 @@ const struct i2c_algorithm i2c_bit_algo = { }; EXPORT_SYMBOL(i2c_bit_algo); +const struct i2c_adapter_quirks i2c_bit_quirk_no_clk_stretch = { + .flags = I2C_AQ_NO_CLK_STRETCH, +}; + /* * registering functions to load algorithms at runtime */ @@ -635,6 +639,8 @@ static int __i2c_bit_add_bus(struct i2c_adapter *adap, /* register new adapter to i2c module... */ adap->algo = &i2c_bit_algo; adap->retries = 3; + if (bit_adap->getscl == NULL) + adap->quirks = &i2c_bit_quirk_no_clk_stretch; ret = add_adapter(adap); if (ret < 0) diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 7b0aa82..0299dfa 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -516,7 +516,7 @@ config I2C_EFM32 config I2C_EG20T tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) I2C" - depends on PCI && (X86_32 || COMPILE_TEST) + depends on PCI && (X86_32 || MIPS || COMPILE_TEST) help This driver is for PCH(Platform controller Hub) I2C of EG20T which is an IOH(Input/Output Hub) for x86 embedded processor. @@ -532,6 +532,7 @@ config I2C_EG20T config I2C_EMEV2 tristate "EMMA Mobile series I2C adapter" depends on HAVE_CLK + select I2C_SLAVE help If you say yes to this option, support will be included for the I2C interface on the Renesas Electronics EM/EV family of processors. @@ -963,11 +964,11 @@ config I2C_XILINX will be called xilinx_i2c. config I2C_XLR - tristate "XLR I2C support" - depends on CPU_XLR + tristate "Netlogic XLR and Sigma Designs I2C support" + depends on CPU_XLR || ARCH_TANGOX help This driver enables support for the on-chip I2C interface of - the Netlogic XLR/XLS MIPS processors. + the Netlogic XLR/XLS MIPS processors and Sigma Designs SOCs. This driver can also be built as a module. If so, the module will be called i2c-xlr. diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c index 10835d1..921d32b 100644 --- a/drivers/i2c/busses/i2c-at91.c +++ b/drivers/i2c/busses/i2c-at91.c @@ -64,6 +64,8 @@ #define AT91_TWI_IADR 0x000c /* Internal Address Register */ #define AT91_TWI_CWGR 0x0010 /* Clock Waveform Generator Reg */ +#define AT91_TWI_CWGR_HOLD_MAX 0x1f +#define AT91_TWI_CWGR_HOLD(x) (((x) & AT91_TWI_CWGR_HOLD_MAX) << 24) #define AT91_TWI_SR 0x0020 /* Status Register */ #define AT91_TWI_TXCOMP BIT(0) /* Transmission Complete */ @@ -110,6 +112,7 @@ struct at91_twi_pdata { unsigned clk_offset; bool has_unre_flag; bool has_alt_cmd; + bool has_hold_field; struct at_dma_slave dma_slave; }; @@ -187,10 +190,11 @@ static void at91_init_twi_bus(struct at91_twi_dev *dev) */ static void at91_calc_twi_clock(struct at91_twi_dev *dev, int twi_clk) { - int ckdiv, cdiv, div; + int ckdiv, cdiv, div, hold = 0; struct at91_twi_pdata *pdata = dev->pdata; int offset = pdata->clk_offset; int max_ckdiv = pdata->clk_max_div; + u32 twd_hold_time_ns = 0; div = max(0, (int)DIV_ROUND_UP(clk_get_rate(dev->clk), 2 * twi_clk) - offset); @@ -204,8 +208,33 @@ static void at91_calc_twi_clock(struct at91_twi_dev *dev, int twi_clk) cdiv = 255; } - dev->twi_cwgr_reg = (ckdiv << 16) | (cdiv << 8) | cdiv; - dev_dbg(dev->dev, "cdiv %d ckdiv %d\n", cdiv, ckdiv); + if (pdata->has_hold_field) { + of_property_read_u32(dev->dev->of_node, "i2c-sda-hold-time-ns", + &twd_hold_time_ns); + + /* + * hold time = HOLD + 3 x T_peripheral_clock + * Use clk rate in kHz to prevent overflows when computing + * hold. + */ + hold = DIV_ROUND_UP(twd_hold_time_ns + * (clk_get_rate(dev->clk) / 1000), 1000000); + hold -= 3; + if (hold < 0) + hold = 0; + if (hold > AT91_TWI_CWGR_HOLD_MAX) { + dev_warn(dev->dev, + "HOLD field set to its maximum value (%d instead of %d)\n", + AT91_TWI_CWGR_HOLD_MAX, hold); + hold = AT91_TWI_CWGR_HOLD_MAX; + } + } + + dev->twi_cwgr_reg = (ckdiv << 16) | (cdiv << 8) | cdiv + | AT91_TWI_CWGR_HOLD(hold); + + dev_dbg(dev->dev, "cdiv %d ckdiv %d hold %d (%d ns)\n", + cdiv, ckdiv, hold, twd_hold_time_ns); } static void at91_twi_dma_cleanup(struct at91_twi_dev *dev) @@ -797,6 +826,7 @@ static struct at91_twi_pdata at91rm9200_config = { .clk_offset = 3, .has_unre_flag = true, .has_alt_cmd = false, + .has_hold_field = false, }; static struct at91_twi_pdata at91sam9261_config = { @@ -804,6 +834,7 @@ static struct at91_twi_pdata at91sam9261_config = { .clk_offset = 4, .has_unre_flag = false, .has_alt_cmd = false, + .has_hold_field = false, }; static struct at91_twi_pdata at91sam9260_config = { @@ -811,6 +842,7 @@ static struct at91_twi_pdata at91sam9260_config = { .clk_offset = 4, .has_unre_flag = false, .has_alt_cmd = false, + .has_hold_field = false, }; static struct at91_twi_pdata at91sam9g20_config = { @@ -818,6 +850,7 @@ static struct at91_twi_pdata at91sam9g20_config = { .clk_offset = 4, .has_unre_flag = false, .has_alt_cmd = false, + .has_hold_field = false, }; static struct at91_twi_pdata at91sam9g10_config = { @@ -825,6 +858,7 @@ static struct at91_twi_pdata at91sam9g10_config = { .clk_offset = 4, .has_unre_flag = false, .has_alt_cmd = false, + .has_hold_field = false, }; static const struct platform_device_id at91_twi_devtypes[] = { @@ -854,6 +888,15 @@ static struct at91_twi_pdata at91sam9x5_config = { .clk_offset = 4, .has_unre_flag = false, .has_alt_cmd = false, + .has_hold_field = false, +}; + +static struct at91_twi_pdata sama5d4_config = { + .clk_max_div = 7, + .clk_offset = 4, + .has_unre_flag = false, + .has_alt_cmd = false, + .has_hold_field = true, }; static struct at91_twi_pdata sama5d2_config = { @@ -861,6 +904,7 @@ static struct at91_twi_pdata sama5d2_config = { .clk_offset = 4, .has_unre_flag = true, .has_alt_cmd = true, + .has_hold_field = true, }; static const struct of_device_id atmel_twi_dt_ids[] = { @@ -883,6 +927,9 @@ static const struct of_device_id atmel_twi_dt_ids[] = { .compatible = "atmel,at91sam9x5-i2c", .data = &at91sam9x5_config, }, { + .compatible = "atmel,sama5d4-i2c", + .data = &sama5d4_config, + }, { .compatible = "atmel,sama5d2-i2c", .data = &sama5d2_config, }, { diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c index 3032b89..818b051 100644 --- a/drivers/i2c/busses/i2c-bcm2835.c +++ b/drivers/i2c/busses/i2c-bcm2835.c @@ -222,6 +222,15 @@ static const struct i2c_algorithm bcm2835_i2c_algo = { .functionality = bcm2835_i2c_func, }; +/* + * This HW was reported to have problems with clock stretching: + * http://www.advamation.com/knowhow/raspberrypi/rpi-i2c-bug.html + * https://www.raspberrypi.org/forums/viewtopic.php?p=146272 + */ +static const struct i2c_adapter_quirks bcm2835_i2c_quirks = { + .flags = I2C_AQ_NO_CLK_STRETCH, +}; + static int bcm2835_i2c_probe(struct platform_device *pdev) { struct bcm2835_i2c_dev *i2c_dev; @@ -293,6 +302,7 @@ static int bcm2835_i2c_probe(struct platform_device *pdev) adap->algo = &bcm2835_i2c_algo; adap->dev.parent = &pdev->dev; adap->dev.of_node = pdev->dev.of_node; + adap->quirks = &bcm2835_i2c_quirks; bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, 0); diff --git a/drivers/i2c/busses/i2c-brcmstb.c b/drivers/i2c/busses/i2c-brcmstb.c index 8e9637e..3711df1 100644 --- a/drivers/i2c/busses/i2c-brcmstb.c +++ b/drivers/i2c/busses/i2c-brcmstb.c @@ -25,13 +25,16 @@ #include <linux/version.h> #define N_DATA_REGS 8 -#define N_DATA_BYTES (N_DATA_REGS * 4) -/* BSC count register field definitions */ -#define BSC_CNT_REG1_MASK 0x0000003f -#define BSC_CNT_REG1_SHIFT 0 -#define BSC_CNT_REG2_MASK 0x00000fc0 -#define BSC_CNT_REG2_SHIFT 6 +/* + * PER_I2C/BSC count register mask depends on 1 byte/4 byte data register + * size. Cable modem and DSL SoCs with Peripheral i2c cores use 1 byte per + * data register whereas STB SoCs use 4 byte per data register transfer, + * account for this difference in total count per transaction and mask to + * use. + */ +#define BSC_CNT_REG1_MASK(nb) (nb == 1 ? GENMASK(3, 0) : GENMASK(5, 0)) +#define BSC_CNT_REG1_SHIFT 0 /* BSC CTL register field definitions */ #define BSC_CTL_REG_DTF_MASK 0x00000003 @@ -41,7 +44,7 @@ #define BSC_CTL_REG_INT_EN_SHIFT 6 #define BSC_CTL_REG_DIV_CLK_MASK 0x00000080 -/* BSC_IIC_ENABLE r/w enable and interrupt field defintions */ +/* BSC_IIC_ENABLE r/w enable and interrupt field definitions */ #define BSC_IIC_EN_RESTART_MASK 0x00000040 #define BSC_IIC_EN_NOSTART_MASK 0x00000020 #define BSC_IIC_EN_NOSTOP_MASK 0x00000010 @@ -169,6 +172,7 @@ struct brcmstb_i2c_dev { struct completion done; bool is_suspended; u32 clk_freq_hz; + int data_regsz; }; /* register accessors for both be and le cpu arch */ @@ -186,6 +190,16 @@ struct brcmstb_i2c_dev { #define bsc_writel(_dev, _val, _reg) \ __bsc_writel(_val, _dev->base + offsetof(struct bsc_regs, _reg)) +static inline int brcmstb_i2c_get_xfersz(struct brcmstb_i2c_dev *dev) +{ + return (N_DATA_REGS * dev->data_regsz); +} + +static inline int brcmstb_i2c_get_data_regsz(struct brcmstb_i2c_dev *dev) +{ + return dev->data_regsz; +} + static void brcmstb_i2c_enable_disable_irq(struct brcmstb_i2c_dev *dev, bool int_en) { @@ -323,14 +337,16 @@ static int brcmstb_i2c_xfer_bsc_data(struct brcmstb_i2c_dev *dev, u8 *buf, unsigned int len, struct i2c_msg *pmsg) { - int cnt, byte, rc; + int cnt, byte, i, rc; enum bsc_xfer_cmd cmd; u32 ctl_reg; struct bsc_regs *pi2creg = dev->bsc_regmap; int no_ack = pmsg->flags & I2C_M_IGNORE_NAK; + int data_regsz = brcmstb_i2c_get_data_regsz(dev); + int xfersz = brcmstb_i2c_get_xfersz(dev); /* see if the transaction needs to check NACK conditions */ - if (no_ack || len <= N_DATA_BYTES) { + if (no_ack || len <= xfersz) { cmd = (pmsg->flags & I2C_M_RD) ? CMD_RD_NOACK : CMD_WR_NOACK; pi2creg->ctlhi_reg |= BSC_CTLHI_REG_IGNORE_ACK_MASK; @@ -348,20 +364,22 @@ static int brcmstb_i2c_xfer_bsc_data(struct brcmstb_i2c_dev *dev, pi2creg->ctl_reg = ctl_reg | DTF_RD_MASK; /* set the read/write length */ - bsc_writel(dev, BSC_CNT_REG1_MASK & (len << BSC_CNT_REG1_SHIFT), - cnt_reg); + bsc_writel(dev, BSC_CNT_REG1_MASK(data_regsz) & + (len << BSC_CNT_REG1_SHIFT), cnt_reg); /* Write data into data_in register */ + if (cmd == CMD_WR || cmd == CMD_WR_NOACK) { - for (cnt = 0; cnt < len; cnt += 4) { + for (cnt = 0, i = 0; cnt < len; cnt += data_regsz, i++) { u32 word = 0; - for (byte = 0; byte < 4; byte++) { - word >>= 8; + for (byte = 0; byte < data_regsz; byte++) { + word >>= BITS_PER_BYTE; if ((cnt + byte) < len) - word |= buf[cnt + byte] << 24; + word |= buf[cnt + byte] << + (BITS_PER_BYTE * (data_regsz - 1)); } - bsc_writel(dev, word, data_in[cnt >> 2]); + bsc_writel(dev, word, data_in[i]); } } @@ -373,14 +391,15 @@ static int brcmstb_i2c_xfer_bsc_data(struct brcmstb_i2c_dev *dev, return rc; } + /* Read data from data_out register */ if (cmd == CMD_RD || cmd == CMD_RD_NOACK) { - for (cnt = 0; cnt < len; cnt += 4) { - u32 data = bsc_readl(dev, data_out[cnt >> 2]); + for (cnt = 0, i = 0; cnt < len; cnt += data_regsz, i++) { + u32 data = bsc_readl(dev, data_out[i]); - for (byte = 0; byte < 4 && + for (byte = 0; byte < data_regsz && (byte + cnt) < len; byte++) { buf[cnt + byte] = data & 0xff; - data >>= 8; + data >>= BITS_PER_BYTE; } } } @@ -448,6 +467,7 @@ static int brcmstb_i2c_xfer(struct i2c_adapter *adapter, int bytes_to_xfer; u8 *tmp_buf; int len = 0; + int xfersz = brcmstb_i2c_get_xfersz(dev); if (dev->is_suspended) return -EBUSY; @@ -482,9 +502,9 @@ static int brcmstb_i2c_xfer(struct i2c_adapter *adapter, /* Perform data transfer */ while (len) { - bytes_to_xfer = min(len, N_DATA_BYTES); + bytes_to_xfer = min(len, xfersz); - if (len <= N_DATA_BYTES && i == (num - 1)) + if (len <= xfersz && i == (num - 1)) brcmstb_set_i2c_start_stop(dev, ~(COND_START_STOP)); @@ -542,8 +562,12 @@ static void brcmstb_i2c_set_bus_speed(struct brcmstb_i2c_dev *dev) static void brcmstb_i2c_set_bsc_reg_defaults(struct brcmstb_i2c_dev *dev) { - /* 4 byte data register */ - dev->bsc_regmap->ctlhi_reg = BSC_CTLHI_REG_DATAREG_SIZE_MASK; + if (brcmstb_i2c_get_data_regsz(dev) == sizeof(u32)) + /* set 4 byte data in/out xfers */ + dev->bsc_regmap->ctlhi_reg = BSC_CTLHI_REG_DATAREG_SIZE_MASK; + else + dev->bsc_regmap->ctlhi_reg &= ~BSC_CTLHI_REG_DATAREG_SIZE_MASK; + bsc_writel(dev, dev->bsc_regmap->ctlhi_reg, ctlhi_reg); /* set bus speed */ brcmstb_i2c_set_bus_speed(dev); @@ -608,6 +632,13 @@ static int brcmstb_i2c_probe(struct platform_device *pdev) dev->clk_freq_hz = bsc_clk[0].hz; } + /* set the data in/out register size for compatible SoCs */ + if (of_device_is_compatible(dev->device->of_node, + "brcmstb,brcmper-i2c")) + dev->data_regsz = sizeof(u8); + else + dev->data_regsz = sizeof(u32); + brcmstb_i2c_set_bsc_reg_defaults(dev); /* Add the i2c adapter */ @@ -674,6 +705,7 @@ static SIMPLE_DEV_PM_OPS(brcmstb_i2c_pm, brcmstb_i2c_suspend, static const struct of_device_id brcmstb_i2c_of_match[] = { {.compatible = "brcm,brcmstb-i2c"}, + {.compatible = "brcm,brcmper-i2c"}, {}, }; MODULE_DEVICE_TABLE(of, brcmstb_i2c_of_match); diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c index 84deed6..6b08d16 100644 --- a/drivers/i2c/busses/i2c-cadence.c +++ b/drivers/i2c/busses/i2c-cadence.c @@ -18,6 +18,7 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/of.h> +#include <linux/pm_runtime.h> /* Register offsets for the I2C device. */ #define CDNS_I2C_CR_OFFSET 0x00 /* Control Register, RW */ @@ -96,6 +97,8 @@ CDNS_I2C_IXR_COMP) #define CDNS_I2C_TIMEOUT msecs_to_jiffies(1000) +/* timeout for pm runtime autosuspend */ +#define CNDS_I2C_PM_TIMEOUT 1000 /* ms */ #define CDNS_I2C_FIFO_DEPTH 16 /* FIFO depth at which the DATA interrupt occurs */ @@ -128,7 +131,6 @@ * @xfer_done: Transfer complete status * @p_send_buf: Pointer to transmit buffer * @p_recv_buf: Pointer to receive buffer - * @suspended: Flag holding the device's PM status * @send_count: Number of bytes still expected to send * @recv_count: Number of bytes still expected to receive * @curr_recv_count: Number of bytes to be received in current transfer @@ -141,6 +143,7 @@ * @quirks: flag for broken hold bit usage in r1p10 */ struct cdns_i2c { + struct device *dev; void __iomem *membase; struct i2c_adapter adap; struct i2c_msg *p_msg; @@ -148,7 +151,6 @@ struct cdns_i2c { struct completion xfer_done; unsigned char *p_send_buf; unsigned char *p_recv_buf; - u8 suspended; unsigned int send_count; unsigned int recv_count; unsigned int curr_recv_count; @@ -569,9 +571,14 @@ static int cdns_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, struct cdns_i2c *id = adap->algo_data; bool hold_quirk; + ret = pm_runtime_get_sync(id->dev); + if (ret < 0) + return ret; /* Check if the bus is free */ - if (cdns_i2c_readreg(CDNS_I2C_SR_OFFSET) & CDNS_I2C_SR_BA) - return -EAGAIN; + if (cdns_i2c_readreg(CDNS_I2C_SR_OFFSET) & CDNS_I2C_SR_BA) { + ret = -EAGAIN; + goto out; + } hold_quirk = !!(id->quirks & CDNS_I2C_BROKEN_HOLD_BIT); /* @@ -590,7 +597,8 @@ static int cdns_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, if (msgs[count].flags & I2C_M_RD) { dev_warn(adap->dev.parent, "Can't do repeated start after a receive message\n"); - return -EOPNOTSUPP; + ret = -EOPNOTSUPP; + goto out; } } id->bus_hold_flag = 1; @@ -608,20 +616,26 @@ static int cdns_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, ret = cdns_i2c_process_msg(id, msgs, adap); if (ret) - return ret; + goto out; /* Report the other error interrupts to application */ if (id->err_status) { cdns_i2c_master_reset(adap); - if (id->err_status & CDNS_I2C_IXR_NACK) - return -ENXIO; - - return -EIO; + if (id->err_status & CDNS_I2C_IXR_NACK) { + ret = -ENXIO; + goto out; + } + ret = -EIO; + goto out; } } - return num; + ret = num; +out: + pm_runtime_mark_last_busy(id->dev); + pm_runtime_put_autosuspend(id->dev); + return ret; } /** @@ -760,7 +774,7 @@ static int cdns_i2c_clk_notifier_cb(struct notifier_block *nb, unsigned long struct clk_notifier_data *ndata = data; struct cdns_i2c *id = to_cdns_i2c(nb); - if (id->suspended) + if (pm_runtime_suspended(id->dev)) return NOTIFY_OK; switch (event) { @@ -808,14 +822,12 @@ static int cdns_i2c_clk_notifier_cb(struct notifier_block *nb, unsigned long * * Return: 0 always */ -static int __maybe_unused cdns_i2c_suspend(struct device *_dev) +static int __maybe_unused cdns_i2c_runtime_suspend(struct device *dev) { - struct platform_device *pdev = container_of(_dev, - struct platform_device, dev); + struct platform_device *pdev = to_platform_device(dev); struct cdns_i2c *xi2c = platform_get_drvdata(pdev); clk_disable(xi2c->clk); - xi2c->suspended = 1; return 0; } @@ -828,26 +840,25 @@ static int __maybe_unused cdns_i2c_suspend(struct device *_dev) * * Return: 0 on success and error value on error */ -static int __maybe_unused cdns_i2c_resume(struct device *_dev) +static int __maybe_unused cdns_i2c_runtime_resume(struct device *dev) { - struct platform_device *pdev = container_of(_dev, - struct platform_device, dev); + struct platform_device *pdev = to_platform_device(dev); struct cdns_i2c *xi2c = platform_get_drvdata(pdev); int ret; ret = clk_enable(xi2c->clk); if (ret) { - dev_err(_dev, "Cannot enable clock.\n"); + dev_err(dev, "Cannot enable clock.\n"); return ret; } - xi2c->suspended = 0; - return 0; } -static SIMPLE_DEV_PM_OPS(cdns_i2c_dev_pm_ops, cdns_i2c_suspend, - cdns_i2c_resume); +static const struct dev_pm_ops cdns_i2c_dev_pm_ops = { + SET_RUNTIME_PM_OPS(cdns_i2c_runtime_suspend, + cdns_i2c_runtime_resume, NULL) +}; static const struct cdns_platform_data r1p10_i2c_def = { .quirks = CDNS_I2C_BROKEN_HOLD_BIT, @@ -881,6 +892,7 @@ static int cdns_i2c_probe(struct platform_device *pdev) if (!id) return -ENOMEM; + id->dev = &pdev->dev; platform_set_drvdata(pdev, id); match = of_match_node(cdns_i2c_of_match, pdev->dev.of_node); @@ -913,10 +925,14 @@ static int cdns_i2c_probe(struct platform_device *pdev) return PTR_ERR(id->clk); } ret = clk_prepare_enable(id->clk); - if (ret) { + if (ret) dev_err(&pdev->dev, "Unable to enable clock.\n"); - return ret; - } + + pm_runtime_enable(id->dev); + pm_runtime_set_autosuspend_delay(id->dev, CNDS_I2C_PM_TIMEOUT); + pm_runtime_use_autosuspend(id->dev); + pm_runtime_set_active(id->dev); + id->clk_rate_change_nb.notifier_call = cdns_i2c_clk_notifier_cb; if (clk_notifier_register(id->clk, &id->clk_rate_change_nb)) dev_warn(&pdev->dev, "Unable to register clock notifier.\n"); @@ -966,6 +982,8 @@ static int cdns_i2c_probe(struct platform_device *pdev) err_clk_dis: clk_disable_unprepare(id->clk); + pm_runtime_set_suspended(&pdev->dev); + pm_runtime_disable(&pdev->dev); return ret; } @@ -984,6 +1002,7 @@ static int cdns_i2c_remove(struct platform_device *pdev) i2c_del_adapter(&id->adap); clk_notifier_unregister(id->clk, &id->clk_rate_change_nb); clk_disable_unprepare(id->clk); + pm_runtime_disable(&pdev->dev); return 0; } diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c index de7fbbb..ba9732c 100644 --- a/drivers/i2c/busses/i2c-designware-core.c +++ b/drivers/i2c/busses/i2c-designware-core.c @@ -271,6 +271,17 @@ static void __i2c_dw_enable(struct dw_i2c_dev *dev, bool enable) enable ? "en" : "dis"); } +static unsigned long i2c_dw_clk_rate(struct dw_i2c_dev *dev) +{ + /* + * Clock is not necessary if we got LCNT/HCNT values directly from + * the platform code. + */ + if (WARN_ON_ONCE(!dev->get_clk_rate_khz)) + return 0; + return dev->get_clk_rate_khz(dev); +} + /** * i2c_dw_init() - initialize the designware i2c master hardware * @dev: device private data @@ -281,7 +292,6 @@ static void __i2c_dw_enable(struct dw_i2c_dev *dev, bool enable) */ int i2c_dw_init(struct dw_i2c_dev *dev) { - u32 input_clock_khz; u32 hcnt, lcnt; u32 reg; u32 sda_falling_time, scl_falling_time; @@ -295,8 +305,6 @@ int i2c_dw_init(struct dw_i2c_dev *dev) } } - input_clock_khz = dev->get_clk_rate_khz(dev); - reg = dw_readl(dev, DW_IC_COMP_TYPE); if (reg == ___constant_swab32(DW_IC_COMP_TYPE_VALUE)) { /* Configure register endianess access */ @@ -325,12 +333,12 @@ int i2c_dw_init(struct dw_i2c_dev *dev) hcnt = dev->ss_hcnt; lcnt = dev->ss_lcnt; } else { - hcnt = i2c_dw_scl_hcnt(input_clock_khz, + hcnt = i2c_dw_scl_hcnt(i2c_dw_clk_rate(dev), 4000, /* tHD;STA = tHIGH = 4.0 us */ sda_falling_time, 0, /* 0: DW default, 1: Ideal */ 0); /* No offset */ - lcnt = i2c_dw_scl_lcnt(input_clock_khz, + lcnt = i2c_dw_scl_lcnt(i2c_dw_clk_rate(dev), 4700, /* tLOW = 4.7 us */ scl_falling_time, 0); /* No offset */ @@ -344,12 +352,12 @@ int i2c_dw_init(struct dw_i2c_dev *dev) hcnt = dev->fs_hcnt; lcnt = dev->fs_lcnt; } else { - hcnt = i2c_dw_scl_hcnt(input_clock_khz, + hcnt = i2c_dw_scl_hcnt(i2c_dw_clk_rate(dev), 600, /* tHD;STA = tHIGH = 0.6 us */ sda_falling_time, 0, /* 0: DW default, 1: Ideal */ 0); /* No offset */ - lcnt = i2c_dw_scl_lcnt(input_clock_khz, + lcnt = i2c_dw_scl_lcnt(i2c_dw_clk_rate(dev), 1300, /* tLOW = 1.3 us */ scl_falling_time, 0); /* No offset */ @@ -860,6 +868,7 @@ int i2c_dw_probe(struct dw_i2c_dev *dev) snprintf(adap->name, sizeof(adap->name), "Synopsys DesignWare I2C adapter"); + adap->retries = 3; adap->algo = &i2c_dw_algo; adap->dev.parent = dev->dev; i2c_set_adapdata(adap, dev); diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c index 1543d35d..7368be0 100644 --- a/drivers/i2c/busses/i2c-designware-pcidrv.c +++ b/drivers/i2c/busses/i2c-designware-pcidrv.c @@ -162,7 +162,7 @@ static struct dw_pci_controller dw_pci_controllers[] = { #ifdef CONFIG_PM static int i2c_dw_pci_suspend(struct device *dev) { - struct pci_dev *pdev = container_of(dev, struct pci_dev, dev); + struct pci_dev *pdev = to_pci_dev(dev); i2c_dw_disable(pci_get_drvdata(pdev)); return 0; @@ -170,7 +170,7 @@ static int i2c_dw_pci_suspend(struct device *dev) static int i2c_dw_pci_resume(struct device *dev) { - struct pci_dev *pdev = container_of(dev, struct pci_dev, dev); + struct pci_dev *pdev = to_pci_dev(dev); return i2c_dw_init(pci_get_drvdata(pdev)); } diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index bf72ae7..438f1b4 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -123,6 +123,7 @@ static const struct acpi_device_id dw_i2c_acpi_match[] = { { "80860F41", 0 }, { "808622C1", 0 }, { "AMD0010", ACCESS_INTR_MASK }, + { "AMDI0510", 0 }, { "APMC0D0F", 0 }, { } }; @@ -134,6 +135,18 @@ static inline int dw_i2c_acpi_configure(struct platform_device *pdev) } #endif +static int i2c_dw_plat_prepare_clk(struct dw_i2c_dev *i_dev, bool prepare) +{ + if (IS_ERR(i_dev->clk)) + return PTR_ERR(i_dev->clk); + + if (prepare) + return clk_prepare_enable(i_dev->clk); + + clk_disable_unprepare(i_dev->clk); + return 0; +} + static int dw_i2c_plat_probe(struct platform_device *pdev) { struct dw_i2c_platform_data *pdata = dev_get_platdata(&pdev->dev); @@ -206,16 +219,13 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_FAST; dev->clk = devm_clk_get(&pdev->dev, NULL); - dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz; - if (IS_ERR(dev->clk)) - return PTR_ERR(dev->clk); - clk_prepare_enable(dev->clk); + if (!i2c_dw_plat_prepare_clk(dev, true)) { + dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz; - if (!dev->sda_hold_time && ht) { - u32 ic_clk = dev->get_clk_rate_khz(dev); - - dev->sda_hold_time = div_u64((u64)ic_clk * ht + 500000, - 1000000); + if (!dev->sda_hold_time && ht) + dev->sda_hold_time = div_u64( + (u64)dev->get_clk_rate_khz(dev) * ht + 500000, + 1000000); } if (!dev->tx_fifo_depth) { @@ -297,7 +307,7 @@ static int dw_i2c_plat_suspend(struct device *dev) struct dw_i2c_dev *i_dev = platform_get_drvdata(pdev); i2c_dw_disable(i_dev); - clk_disable_unprepare(i_dev->clk); + i2c_dw_plat_prepare_clk(i_dev, false); return 0; } @@ -307,7 +317,7 @@ static int dw_i2c_plat_resume(struct device *dev) struct platform_device *pdev = to_platform_device(dev); struct dw_i2c_dev *i_dev = platform_get_drvdata(pdev); - clk_prepare_enable(i_dev->clk); + i2c_dw_plat_prepare_clk(i_dev, true); if (!i_dev->pm_runtime_disabled) i2c_dw_init(i_dev); diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c index 76e699f..137125b 100644 --- a/drivers/i2c/busses/i2c-eg20t.c +++ b/drivers/i2c/busses/i2c-eg20t.c @@ -795,6 +795,7 @@ static int pch_i2c_probe(struct pci_dev *pdev, /* base_addr + offset; */ adap_info->pch_data[i].pch_base_address = base_addr + 0x100 * i; + pch_adap->dev.of_node = pdev->dev.of_node; pch_adap->dev.parent = &pdev->dev; pch_i2c_init(&adap_info->pch_data[i]); diff --git a/drivers/i2c/busses/i2c-emev2.c b/drivers/i2c/busses/i2c-emev2.c index 192ef6b..96bb4e7 100644 --- a/drivers/i2c/busses/i2c-emev2.c +++ b/drivers/i2c/busses/i2c-emev2.c @@ -71,6 +71,7 @@ struct em_i2c_device { struct i2c_adapter adap; struct completion msg_done; struct clk *sclk; + struct i2c_client *slave; }; static inline void em_clear_set_bit(struct em_i2c_device *priv, u8 clear, u8 set, u8 reg) @@ -226,22 +227,131 @@ static int em_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, return num; } +static bool em_i2c_slave_irq(struct em_i2c_device *priv) +{ + u8 status, value; + enum i2c_slave_event event; + int ret; + + if (!priv->slave) + return false; + + status = readb(priv->base + I2C_OFS_IICSE0); + + /* Extension code, do not participate */ + if (status & I2C_BIT_EXC0) { + em_clear_set_bit(priv, 0, I2C_BIT_LREL0, I2C_OFS_IICC0); + return true; + } + + /* Stop detected, we don't know if it's for slave or master */ + if (status & I2C_BIT_SPD0) { + /* Notify slave device */ + i2c_slave_event(priv->slave, I2C_SLAVE_STOP, &value); + /* Pretend we did not handle the interrupt */ + return false; + } + + /* Only handle interrupts addressed to us */ + if (!(status & I2C_BIT_COI0)) + return false; + + /* Enable stop interrupts */ + em_clear_set_bit(priv, 0, I2C_BIT_SPIE0, I2C_OFS_IICC0); + + /* Transmission or Reception */ + if (status & I2C_BIT_TRC0) { + if (status & I2C_BIT_ACKD0) { + /* 9 bit interrupt mode */ + em_clear_set_bit(priv, 0, I2C_BIT_WTIM0, I2C_OFS_IICC0); + + /* Send data */ + event = status & I2C_BIT_STD0 ? + I2C_SLAVE_READ_REQUESTED : + I2C_SLAVE_READ_PROCESSED; + i2c_slave_event(priv->slave, event, &value); + writeb(value, priv->base + I2C_OFS_IIC0); + } else { + /* NACK, stop transmitting */ + em_clear_set_bit(priv, 0, I2C_BIT_LREL0, I2C_OFS_IICC0); + } + } else { + /* 8 bit interrupt mode */ + em_clear_set_bit(priv, I2C_BIT_WTIM0, I2C_BIT_ACKE0, + I2C_OFS_IICC0); + em_clear_set_bit(priv, I2C_BIT_WTIM0, I2C_BIT_WREL0, + I2C_OFS_IICC0); + + if (status & I2C_BIT_STD0) { + i2c_slave_event(priv->slave, I2C_SLAVE_WRITE_REQUESTED, + &value); + } else { + /* Recv data */ + value = readb(priv->base + I2C_OFS_IIC0); + ret = i2c_slave_event(priv->slave, + I2C_SLAVE_WRITE_RECEIVED, &value); + if (ret < 0) + em_clear_set_bit(priv, I2C_BIT_ACKE0, 0, + I2C_OFS_IICC0); + } + } + + return true; +} + static irqreturn_t em_i2c_irq_handler(int this_irq, void *dev_id) { struct em_i2c_device *priv = dev_id; + if (em_i2c_slave_irq(priv)) + return IRQ_HANDLED; + complete(&priv->msg_done); + return IRQ_HANDLED; } static u32 em_i2c_func(struct i2c_adapter *adap) { - return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SLAVE; +} + +static int em_i2c_reg_slave(struct i2c_client *slave) +{ + struct em_i2c_device *priv = i2c_get_adapdata(slave->adapter); + + if (priv->slave) + return -EBUSY; + + if (slave->flags & I2C_CLIENT_TEN) + return -EAFNOSUPPORT; + + priv->slave = slave; + + /* Set slave address */ + writeb(slave->addr << 1, priv->base + I2C_OFS_SVA0); + + return 0; +} + +static int em_i2c_unreg_slave(struct i2c_client *slave) +{ + struct em_i2c_device *priv = i2c_get_adapdata(slave->adapter); + + WARN_ON(!priv->slave); + + writeb(0, priv->base + I2C_OFS_SVA0); + + priv->slave = NULL; + + return 0; } static struct i2c_algorithm em_i2c_algo = { .master_xfer = em_i2c_xfer, .functionality = em_i2c_func, + .reg_slave = em_i2c_reg_slave, + .unreg_slave = em_i2c_unreg_slave, }; static int em_i2c_probe(struct platform_device *pdev) diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c index ab49230..b6c0803 100644 --- a/drivers/i2c/busses/i2c-ibm_iic.c +++ b/drivers/i2c/busses/i2c-ibm_iic.c @@ -99,7 +99,7 @@ static void dump_iic_regs(const char* header, struct ibm_iic_private* dev) #endif /* Bus timings (in ns) for bit-banging */ -static struct i2c_timings { +static struct ibm_iic_timings { unsigned int hd_sta; unsigned int su_sto; unsigned int low; @@ -241,7 +241,7 @@ static int iic_dc_wait(volatile struct iic_regs __iomem *iic, u8 mask) static int iic_smbus_quick(struct ibm_iic_private* dev, const struct i2c_msg* p) { volatile struct iic_regs __iomem *iic = dev->vaddr; - const struct i2c_timings* t = &timings[dev->fast_mode ? 1 : 0]; + const struct ibm_iic_timings *t = &timings[dev->fast_mode ? 1 : 0]; u8 mask, v, sda; int i, res; diff --git a/drivers/i2c/busses/i2c-img-scb.c b/drivers/i2c/busses/i2c-img-scb.c index 3795fe1..379ef9c 100644 --- a/drivers/i2c/busses/i2c-img-scb.c +++ b/drivers/i2c/busses/i2c-img-scb.c @@ -151,10 +151,11 @@ #define INT_FIFO_EMPTYING BIT(12) #define INT_TRANSACTION_DONE BIT(15) #define INT_SLAVE_EVENT BIT(16) +#define INT_MASTER_HALTED BIT(17) #define INT_TIMING BIT(18) +#define INT_STOP_DETECTED BIT(19) #define INT_FIFO_FULL_FILLING (INT_FIFO_FULL | INT_FIFO_FILLING) -#define INT_FIFO_EMPTY_EMPTYING (INT_FIFO_EMPTY | INT_FIFO_EMPTYING) /* Level interrupts need clearing after handling instead of before */ #define INT_LEVEL 0x01e00 @@ -177,7 +178,8 @@ INT_FIFO_FULL | \ INT_FIFO_FILLING | \ INT_FIFO_EMPTY | \ - INT_FIFO_EMPTYING) + INT_MASTER_HALTED | \ + INT_STOP_DETECTED) #define INT_ENABLE_MASK_WAITSTOP (INT_SLAVE_EVENT | \ INT_ADDR_ACK_ERR | \ @@ -511,7 +513,17 @@ static void img_i2c_soft_reset(struct img_i2c *i2c) SCB_CONTROL_CLK_ENABLE | SCB_CONTROL_SOFT_RESET); } -/* enable or release transaction halt for control of repeated starts */ +/* + * Enable or release transaction halt for control of repeated starts. + * In version 3.3 of the IP when transaction halt is set, an interrupt + * will be generated after each byte of a transfer instead of after + * every transfer but before the stop bit. + * Due to this behaviour we have to be careful that every time we + * release the transaction halt we have to re-enable it straight away + * so that we only process a single byte, not doing so will result in + * all remaining bytes been processed and a stop bit being issued, + * which will prevent us having a repeated start. + */ static void img_i2c_transaction_halt(struct img_i2c *i2c, bool t_halt) { u32 val; @@ -580,7 +592,6 @@ static void img_i2c_read(struct img_i2c *i2c) img_i2c_writel(i2c, SCB_READ_ADDR_REG, i2c->msg.addr); img_i2c_writel(i2c, SCB_READ_COUNT_REG, i2c->msg.len); - img_i2c_transaction_halt(i2c, false); mod_timer(&i2c->check_timer, jiffies + msecs_to_jiffies(1)); } @@ -594,7 +605,6 @@ static void img_i2c_write(struct img_i2c *i2c) img_i2c_writel(i2c, SCB_WRITE_ADDR_REG, i2c->msg.addr); img_i2c_writel(i2c, SCB_WRITE_COUNT_REG, i2c->msg.len); - img_i2c_transaction_halt(i2c, false); mod_timer(&i2c->check_timer, jiffies + msecs_to_jiffies(1)); img_i2c_write_fifo(i2c); @@ -750,7 +760,9 @@ static unsigned int img_i2c_atomic(struct img_i2c *i2c, next_cmd = CMD_RET_ACK; break; case CMD_RET_ACK: - if (i2c->line_status & LINESTAT_ACK_DET) { + if (i2c->line_status & LINESTAT_ACK_DET || + (i2c->line_status & LINESTAT_NACK_DET && + i2c->msg.flags & I2C_M_IGNORE_NAK)) { if (i2c->msg.len == 0) { next_cmd = CMD_GEN_STOP; } else if (i2c->msg.flags & I2C_M_RD) { @@ -858,34 +870,42 @@ static unsigned int img_i2c_auto(struct img_i2c *i2c, /* Enable transaction halt on start bit */ if (!i2c->last_msg && line_status & LINESTAT_START_BIT_DET) { - img_i2c_transaction_halt(i2c, true); + img_i2c_transaction_halt(i2c, !i2c->last_msg); /* we're no longer interested in the slave event */ i2c->int_enable &= ~INT_SLAVE_EVENT; } mod_timer(&i2c->check_timer, jiffies + msecs_to_jiffies(1)); + if (int_status & INT_STOP_DETECTED) { + /* Drain remaining data in FIFO and complete transaction */ + if (i2c->msg.flags & I2C_M_RD) + img_i2c_read_fifo(i2c); + return ISR_COMPLETE(0); + } + if (i2c->msg.flags & I2C_M_RD) { - if (int_status & INT_FIFO_FULL_FILLING) { + if (int_status & (INT_FIFO_FULL_FILLING | INT_MASTER_HALTED)) { img_i2c_read_fifo(i2c); if (i2c->msg.len == 0) return ISR_WAITSTOP; } } else { - if (int_status & INT_FIFO_EMPTY_EMPTYING) { - /* - * The write fifo empty indicates that we're in the - * last byte so it's safe to start a new write - * transaction without losing any bytes from the - * previous one. - * see 2.3.7 Repeated Start Transactions. - */ + if (int_status & (INT_FIFO_EMPTY | INT_MASTER_HALTED)) { if ((int_status & INT_FIFO_EMPTY) && i2c->msg.len == 0) return ISR_WAITSTOP; img_i2c_write_fifo(i2c); } } + if (int_status & INT_MASTER_HALTED) { + /* + * Release and then enable transaction halt, to + * allow only a single byte to proceed. + */ + img_i2c_transaction_halt(i2c, false); + img_i2c_transaction_halt(i2c, !i2c->last_msg); + } return 0; } @@ -1017,20 +1037,23 @@ static int img_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, return -EIO; for (i = 0; i < num; i++) { - if (likely(msgs[i].len)) - continue; /* * 0 byte reads are not possible because the slave could try * and pull the data line low, preventing a stop bit. */ - if (unlikely(msgs[i].flags & I2C_M_RD)) + if (!msgs[i].len && msgs[i].flags & I2C_M_RD) return -EIO; /* * 0 byte writes are possible and used for probing, but we * cannot do them in automatic mode, so use atomic mode * instead. + * + * Also, the I2C_M_IGNORE_NAK mode can only be implemented + * in atomic mode. */ - atomic = true; + if (!msgs[i].len || + (msgs[i].flags & I2C_M_IGNORE_NAK)) + atomic = true; } ret = clk_prepare_enable(i2c->scb_clk); @@ -1069,12 +1092,31 @@ static int img_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, img_i2c_writel(i2c, SCB_INT_CLEAR_REG, ~0); img_i2c_writel(i2c, SCB_CLEAR_REG, ~0); - if (atomic) + if (atomic) { img_i2c_atomic_start(i2c); - else if (msg->flags & I2C_M_RD) - img_i2c_read(i2c); - else - img_i2c_write(i2c); + } else { + /* + * Enable transaction halt if not the last message in + * the queue so that we can control repeated starts. + */ + img_i2c_transaction_halt(i2c, !i2c->last_msg); + + if (msg->flags & I2C_M_RD) + img_i2c_read(i2c); + else + img_i2c_write(i2c); + + /* + * Release and then enable transaction halt, to + * allow only a single byte to proceed. + * This doesn't have an effect on the initial transfer + * but will allow the following transfers to start + * processing if the previous transfer was marked as + * complete while the i2c block was halted. + */ + img_i2c_transaction_halt(i2c, false); + img_i2c_transaction_halt(i2c, !i2c->last_msg); + } spin_unlock_irqrestore(&i2c->lock, flags); time_left = wait_for_completion_timeout(&i2c->msg_complete, diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index d4d8536..a2b132c 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -29,9 +29,6 @@ * */ -/** Includes ******************************************************************* -*******************************************************************************/ - #include <linux/clk.h> #include <linux/completion.h> #include <linux/delay.h> @@ -53,12 +50,10 @@ #include <linux/pinctrl/consumer.h> #include <linux/platform_data/i2c-imx.h> #include <linux/platform_device.h> +#include <linux/pm_runtime.h> #include <linux/sched.h> #include <linux/slab.h> -/** Defines ******************************************************************** -*******************************************************************************/ - /* This will be the driver name the kernel reports */ #define DRIVER_NAME "imx-i2c" @@ -120,8 +115,7 @@ #define I2CR_IEN_OPCODE_0 0x0 #define I2CR_IEN_OPCODE_1 I2CR_IEN -/** Variables ****************************************************************** -*******************************************************************************/ +#define I2C_PM_TIMEOUT 10 /* ms */ /* * sorted list of clock divider, register value pairs @@ -346,7 +340,7 @@ fail_tx: dma_release_channel(dma->chan_tx); fail_al: devm_kfree(dev, dma); - dev_info(dev, "can't use DMA\n"); + dev_info(dev, "can't use DMA, using PIO instead.\n"); } static void i2c_imx_dma_callback(void *arg) @@ -393,6 +387,7 @@ static int i2c_imx_dma_xfer(struct imx_i2c_struct *i2c_imx, return 0; err_submit: + dmaengine_terminate_all(dma->chan_using); err_desc: dma_unmap_single(chan_dev, dma->dma_buf, dma->dma_len, dma->dma_data_dir); @@ -416,9 +411,6 @@ static void i2c_imx_dma_free(struct imx_i2c_struct *i2c_imx) dma->chan_using = NULL; } -/** Functions for IMX I2C adapter driver *************************************** -*******************************************************************************/ - static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy) { unsigned long orig_jiffies = jiffies; @@ -527,9 +519,6 @@ static int i2c_imx_start(struct imx_i2c_struct *i2c_imx) i2c_imx_set_clk(i2c_imx); - result = clk_prepare_enable(i2c_imx->clk); - if (result) - return result; imx_i2c_write_reg(i2c_imx->ifdr, i2c_imx, IMX_I2C_IFDR); /* Enable I2C controller */ imx_i2c_write_reg(i2c_imx->hwdata->i2sr_clr_opcode, i2c_imx, IMX_I2C_I2SR); @@ -582,7 +571,6 @@ static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx) /* Disable I2C controller */ temp = i2c_imx->hwdata->i2cr_ien_opcode ^ I2CR_IEN, imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR); - clk_disable_unprepare(i2c_imx->clk); } static irqreturn_t i2c_imx_isr(int irq, void *dev_id) @@ -901,6 +889,10 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter, dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__); + result = pm_runtime_get_sync(i2c_imx->adapter.dev.parent); + if (result < 0) + goto out; + /* Start I2C transfer */ result = i2c_imx_start(i2c_imx); if (result) { @@ -964,6 +956,10 @@ fail0: /* Stop I2C transfer */ i2c_imx_stop(i2c_imx); + pm_runtime_mark_last_busy(i2c_imx->adapter.dev.parent); + pm_runtime_put_autosuspend(i2c_imx->adapter.dev.parent); + +out: dev_dbg(&i2c_imx->adapter.dev, "<%s> exit with: %s: %d\n", __func__, (result < 0) ? "error" : "success msg", (result < 0) ? result : num); @@ -997,10 +993,8 @@ static void i2c_imx_init_recovery_info(struct imx_i2c_struct *i2c_imx, PINCTRL_STATE_DEFAULT); i2c_imx->pinctrl_pins_gpio = pinctrl_lookup_state(i2c_imx->pinctrl, "gpio"); - rinfo->sda_gpio = of_get_named_gpio_flags(pdev->dev.of_node, - "sda-gpios", 0, NULL); - rinfo->scl_gpio = of_get_named_gpio_flags(pdev->dev.of_node, - "scl-gpios", 0, NULL); + rinfo->sda_gpio = of_get_named_gpio(pdev->dev.of_node, "sda-gpios", 0); + rinfo->scl_gpio = of_get_named_gpio(pdev->dev.of_node, "scl-gpios", 0); if (!gpio_is_valid(rinfo->sda_gpio) || !gpio_is_valid(rinfo->scl_gpio) || @@ -1083,7 +1077,7 @@ static int i2c_imx_probe(struct platform_device *pdev) ret = clk_prepare_enable(i2c_imx->clk); if (ret) { - dev_err(&pdev->dev, "can't enable I2C clock\n"); + dev_err(&pdev->dev, "can't enable I2C clock, ret=%d\n", ret); return ret; } @@ -1107,6 +1101,18 @@ static int i2c_imx_probe(struct platform_device *pdev) /* Set up adapter data */ i2c_set_adapdata(&i2c_imx->adapter, i2c_imx); + /* Set up platform driver data */ + platform_set_drvdata(pdev, i2c_imx); + + pm_runtime_set_autosuspend_delay(&pdev->dev, I2C_PM_TIMEOUT); + pm_runtime_use_autosuspend(&pdev->dev); + pm_runtime_set_active(&pdev->dev); + pm_runtime_enable(&pdev->dev); + + ret = pm_runtime_get_sync(&pdev->dev); + if (ret < 0) + goto rpm_disable; + /* Set up clock divider */ i2c_imx->bitrate = IMX_I2C_BIT_RATE; ret = of_property_read_u32(pdev->dev.of_node, @@ -1125,12 +1131,11 @@ static int i2c_imx_probe(struct platform_device *pdev) ret = i2c_add_numbered_adapter(&i2c_imx->adapter); if (ret < 0) { dev_err(&pdev->dev, "registration failed\n"); - goto clk_disable; + goto rpm_disable; } - /* Set up platform driver data */ - platform_set_drvdata(pdev, i2c_imx); - clk_disable_unprepare(i2c_imx->clk); + pm_runtime_mark_last_busy(&pdev->dev); + pm_runtime_put_autosuspend(&pdev->dev); dev_dbg(&i2c_imx->adapter.dev, "claimed irq %d\n", irq); dev_dbg(&i2c_imx->adapter.dev, "device resources: %pR\n", res); @@ -1143,6 +1148,12 @@ static int i2c_imx_probe(struct platform_device *pdev) return 0; /* Return OK */ +rpm_disable: + pm_runtime_put_noidle(&pdev->dev); + pm_runtime_disable(&pdev->dev); + pm_runtime_set_suspended(&pdev->dev); + pm_runtime_dont_use_autosuspend(&pdev->dev); + clk_disable: clk_disable_unprepare(i2c_imx->clk); return ret; @@ -1151,6 +1162,11 @@ clk_disable: static int i2c_imx_remove(struct platform_device *pdev) { struct imx_i2c_struct *i2c_imx = platform_get_drvdata(pdev); + int ret; + + ret = pm_runtime_get_sync(&pdev->dev); + if (ret < 0) + return ret; /* remove adapter */ dev_dbg(&i2c_imx->adapter.dev, "adapter removed\n"); @@ -1165,17 +1181,54 @@ static int i2c_imx_remove(struct platform_device *pdev) imx_i2c_write_reg(0, i2c_imx, IMX_I2C_I2CR); imx_i2c_write_reg(0, i2c_imx, IMX_I2C_I2SR); + clk_disable_unprepare(i2c_imx->clk); + + pm_runtime_put_noidle(&pdev->dev); + pm_runtime_disable(&pdev->dev); + + return 0; +} + +#ifdef CONFIG_PM +static int i2c_imx_runtime_suspend(struct device *dev) +{ + struct imx_i2c_struct *i2c_imx = dev_get_drvdata(dev); + + clk_disable_unprepare(i2c_imx->clk); + return 0; } +static int i2c_imx_runtime_resume(struct device *dev) +{ + struct imx_i2c_struct *i2c_imx = dev_get_drvdata(dev); + int ret; + + ret = clk_prepare_enable(i2c_imx->clk); + if (ret) + dev_err(dev, "can't enable I2C clock, ret=%d\n", ret); + + return ret; +} + +static const struct dev_pm_ops i2c_imx_pm_ops = { + SET_RUNTIME_PM_OPS(i2c_imx_runtime_suspend, + i2c_imx_runtime_resume, NULL) +}; +#define I2C_IMX_PM_OPS (&i2c_imx_pm_ops) +#else +#define I2C_IMX_PM_OPS NULL +#endif /* CONFIG_PM */ + static struct platform_driver i2c_imx_driver = { .probe = i2c_imx_probe, .remove = i2c_imx_remove, - .driver = { - .name = DRIVER_NAME, + .driver = { + .name = DRIVER_NAME, + .pm = I2C_IMX_PM_OPS, .of_match_table = i2c_imx_dt_ids, }, - .id_table = imx_i2c_devtype, + .id_table = imx_i2c_devtype, }; static int __init i2c_adap_imx_init(void) diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c index 9b86716..aec8e6c 100644 --- a/drivers/i2c/busses/i2c-mt65xx.c +++ b/drivers/i2c/busses/i2c-mt65xx.c @@ -132,6 +132,7 @@ struct mtk_i2c_compatible { unsigned char pmic_i2c: 1; unsigned char dcm: 1; unsigned char auto_restart: 1; + unsigned char aux_len_reg: 1; }; struct mtk_i2c { @@ -153,6 +154,8 @@ struct mtk_i2c { enum mtk_trans_op op; u16 timing_reg; u16 high_speed_reg; + unsigned char auto_restart; + bool ignore_restart_irq; const struct mtk_i2c_compatible *dev_comp; }; @@ -178,6 +181,7 @@ static const struct mtk_i2c_compatible mt6577_compat = { .pmic_i2c = 0, .dcm = 1, .auto_restart = 0, + .aux_len_reg = 0, }; static const struct mtk_i2c_compatible mt6589_compat = { @@ -185,6 +189,7 @@ static const struct mtk_i2c_compatible mt6589_compat = { .pmic_i2c = 1, .dcm = 0, .auto_restart = 0, + .aux_len_reg = 0, }; static const struct mtk_i2c_compatible mt8173_compat = { @@ -192,6 +197,7 @@ static const struct mtk_i2c_compatible mt8173_compat = { .pmic_i2c = 0, .dcm = 1, .auto_restart = 1, + .aux_len_reg = 1, }; static const struct of_device_id mtk_i2c_of_match[] = { @@ -373,7 +379,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs, i2c->irq_stat = 0; - if (i2c->dev_comp->auto_restart) + if (i2c->auto_restart) restart_flag = I2C_RS_TRANSFER; reinit_completion(&i2c->msg_complete); @@ -411,8 +417,14 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs, /* Set transfer and transaction len */ if (i2c->op == I2C_MASTER_WRRD) { - writew(msgs->len | ((msgs + 1)->len) << 8, - i2c->base + OFFSET_TRANSFER_LEN); + if (i2c->dev_comp->aux_len_reg) { + writew(msgs->len, i2c->base + OFFSET_TRANSFER_LEN); + writew((msgs + 1)->len, i2c->base + + OFFSET_TRANSFER_LEN_AUX); + } else { + writew(msgs->len | ((msgs + 1)->len) << 8, + i2c->base + OFFSET_TRANSFER_LEN); + } writew(I2C_WRRD_TRANAC_VALUE, i2c->base + OFFSET_TRANSAC_LEN); } else { writew(msgs->len, i2c->base + OFFSET_TRANSFER_LEN); @@ -461,7 +473,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs, writel(I2C_DMA_START_EN, i2c->pdmabase + OFFSET_EN); - if (!i2c->dev_comp->auto_restart) { + if (!i2c->auto_restart) { start_reg = I2C_TRANSAC_START; } else { start_reg = I2C_TRANSAC_START | I2C_RS_MUL_TRIG; @@ -518,6 +530,24 @@ static int mtk_i2c_transfer(struct i2c_adapter *adap, if (ret) return ret; + i2c->auto_restart = i2c->dev_comp->auto_restart; + + /* checking if we can skip restart and optimize using WRRD mode */ + if (i2c->auto_restart && num == 2) { + if (!(msgs[0].flags & I2C_M_RD) && (msgs[1].flags & I2C_M_RD) && + msgs[0].addr == msgs[1].addr) { + i2c->auto_restart = 0; + } + } + + if (i2c->auto_restart && num >= 2 && i2c->speed_hz > MAX_FS_MODE_SPEED) + /* ignore the first restart irq after the master code, + * otherwise the first transfer will be discarded. + */ + i2c->ignore_restart_irq = true; + else + i2c->ignore_restart_irq = false; + while (left_num--) { if (!msgs->buf) { dev_dbg(i2c->dev, "data buffer is NULL.\n"); @@ -530,7 +560,7 @@ static int mtk_i2c_transfer(struct i2c_adapter *adap, else i2c->op = I2C_MASTER_WR; - if (!i2c->dev_comp->auto_restart) { + if (!i2c->auto_restart) { if (num > 1) { /* combined two messages into one transaction */ i2c->op = I2C_MASTER_WRRD; @@ -559,7 +589,7 @@ static irqreturn_t mtk_i2c_irq(int irqno, void *dev_id) u16 restart_flag = 0; u16 intr_stat; - if (i2c->dev_comp->auto_restart) + if (i2c->auto_restart) restart_flag = I2C_RS_TRANSFER; intr_stat = readw(i2c->base + OFFSET_INTR_STAT); @@ -571,8 +601,16 @@ static irqreturn_t mtk_i2c_irq(int irqno, void *dev_id) * i2c->irq_stat need keep the two interrupt value. */ i2c->irq_stat |= intr_stat; - if (i2c->irq_stat & (I2C_TRANSAC_COMP | restart_flag)) - complete(&i2c->msg_complete); + + if (i2c->ignore_restart_irq && (i2c->irq_stat & restart_flag)) { + i2c->ignore_restart_irq = false; + i2c->irq_stat = 0; + writew(I2C_RS_MUL_CNFG | I2C_RS_MUL_TRIG | I2C_TRANSAC_START, + i2c->base + OFFSET_START); + } else { + if (i2c->irq_stat & (I2C_TRANSAC_COMP | restart_flag)) + complete(&i2c->msg_complete); + } return IRQ_HANDLED; } diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index 630bce6..e045985 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -23,6 +23,9 @@ Note: we assume there can only be one device, with one or more SMBus interfaces. + The device can register multiple i2c_adapters (up to PIIX4_MAX_ADAPTERS). + For devices supporting multiple ports the i2c_adapter should provide + an i2c_algorithm to access them. */ #include <linux/module.h> @@ -37,6 +40,7 @@ #include <linux/dmi.h> #include <linux/acpi.h> #include <linux/io.h> +#include <linux/mutex.h> /* PIIX4 SMBus address offsets */ @@ -75,6 +79,16 @@ #define PIIX4_WORD_DATA 0x0C #define PIIX4_BLOCK_DATA 0x14 +/* Multi-port constants */ +#define PIIX4_MAX_ADAPTERS 4 + +/* SB800 constants */ +#define SB800_PIIX4_SMB_IDX 0xcd6 + +/* SB800 port is selected by bits 2:1 of the smb_en register (0x2c) */ +#define SB800_PIIX4_PORT_IDX 0x2c +#define SB800_PIIX4_PORT_IDX_MASK 0x06 + /* insmod parameters */ /* If force is set to anything different from 0, we forcibly enable the @@ -122,8 +136,19 @@ static const struct dmi_system_id piix4_dmi_ibm[] = { { }, }; +/* SB800 globals */ +static const char *piix4_main_port_names_sb800[PIIX4_MAX_ADAPTERS] = { + "SDA0", "SDA2", "SDA3", "SDA4" +}; +static const char *piix4_aux_port_name_sb800 = "SDA1"; + struct i2c_piix4_adapdata { unsigned short smba; + + /* SB800 */ + bool sb800_main; + unsigned short port; + struct mutex *mutex; }; static int piix4_setup(struct pci_dev *PIIX4_dev, @@ -229,7 +254,6 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev, const struct pci_device_id *id, u8 aux) { unsigned short piix4_smba; - unsigned short smba_idx = 0xcd6; u8 smba_en_lo, smba_en_hi, smb_en, smb_en_status; u8 i2ccfg, i2ccfg_offset = 0x10; @@ -251,16 +275,10 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev, else smb_en = (aux) ? 0x28 : 0x2c; - if (!request_region(smba_idx, 2, "smba_idx")) { - dev_err(&PIIX4_dev->dev, "SMBus base address index region " - "0x%x already in use!\n", smba_idx); - return -EBUSY; - } - outb_p(smb_en, smba_idx); - smba_en_lo = inb_p(smba_idx + 1); - outb_p(smb_en + 1, smba_idx); - smba_en_hi = inb_p(smba_idx + 1); - release_region(smba_idx, 2); + outb_p(smb_en, SB800_PIIX4_SMB_IDX); + smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1); + outb_p(smb_en + 1, SB800_PIIX4_SMB_IDX); + smba_en_hi = inb_p(SB800_PIIX4_SMB_IDX + 1); if (!smb_en) { smb_en_status = smba_en_lo & 0x10; @@ -483,7 +501,7 @@ static s32 piix4_access(struct i2c_adapter * adap, u16 addr, if (len == 0 || len > I2C_SMBUS_BLOCK_MAX) return -EINVAL; outb_p(len, SMBHSTDAT0); - i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */ + inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */ for (i = 1; i <= len; i++) outb_p(data->block[i], SMBBLKDAT); } @@ -516,7 +534,7 @@ static s32 piix4_access(struct i2c_adapter * adap, u16 addr, data->block[0] = inb_p(SMBHSTDAT0); if (data->block[0] == 0 || data->block[0] > I2C_SMBUS_BLOCK_MAX) return -EPROTO; - i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */ + inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */ for (i = 1; i <= data->block[0]; i++) data->block[i] = inb_p(SMBBLKDAT); break; @@ -524,6 +542,43 @@ static s32 piix4_access(struct i2c_adapter * adap, u16 addr, return 0; } +/* + * Handles access to multiple SMBus ports on the SB800. + * The port is selected by bits 2:1 of the smb_en register (0x2c). + * Returns negative errno on error. + * + * Note: The selected port must be returned to the initial selection to avoid + * problems on certain systems. + */ +static s32 piix4_access_sb800(struct i2c_adapter *adap, u16 addr, + unsigned short flags, char read_write, + u8 command, int size, union i2c_smbus_data *data) +{ + struct i2c_piix4_adapdata *adapdata = i2c_get_adapdata(adap); + u8 smba_en_lo; + u8 port; + int retval; + + mutex_lock(adapdata->mutex); + + outb_p(SB800_PIIX4_PORT_IDX, SB800_PIIX4_SMB_IDX); + smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1); + + port = adapdata->port; + if ((smba_en_lo & SB800_PIIX4_PORT_IDX_MASK) != (port << 1)) + outb_p((smba_en_lo & ~SB800_PIIX4_PORT_IDX_MASK) | (port << 1), + SB800_PIIX4_SMB_IDX + 1); + + retval = piix4_access(adap, addr, flags, read_write, + command, size, data); + + outb_p(smba_en_lo, SB800_PIIX4_SMB_IDX + 1); + + mutex_unlock(adapdata->mutex); + + return retval; +} + static u32 piix4_func(struct i2c_adapter *adapter) { return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | @@ -536,6 +591,11 @@ static const struct i2c_algorithm smbus_algorithm = { .functionality = piix4_func, }; +static const struct i2c_algorithm piix4_smbus_algorithm_sb800 = { + .smbus_xfer = piix4_access_sb800, + .functionality = piix4_func, +}; + static const struct pci_device_id piix4_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3) }, @@ -561,11 +621,11 @@ static const struct pci_device_id piix4_ids[] = { MODULE_DEVICE_TABLE (pci, piix4_ids); -static struct i2c_adapter *piix4_main_adapter; +static struct i2c_adapter *piix4_main_adapters[PIIX4_MAX_ADAPTERS]; static struct i2c_adapter *piix4_aux_adapter; static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba, - struct i2c_adapter **padap) + const char *name, struct i2c_adapter **padap) { struct i2c_adapter *adap; struct i2c_piix4_adapdata *adapdata; @@ -594,7 +654,7 @@ static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba, adap->dev.parent = &dev->dev; snprintf(adap->name, sizeof(adap->name), - "SMBus PIIX4 adapter at %04x", smba); + "SMBus PIIX4 adapter %s at %04x", name, smba); i2c_set_adapdata(adap, adapdata); @@ -611,6 +671,54 @@ static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba, return 0; } +static int piix4_add_adapters_sb800(struct pci_dev *dev, unsigned short smba) +{ + struct mutex *mutex; + struct i2c_piix4_adapdata *adapdata; + int port; + int retval; + + mutex = kzalloc(sizeof(*mutex), GFP_KERNEL); + if (mutex == NULL) + return -ENOMEM; + + mutex_init(mutex); + + for (port = 0; port < PIIX4_MAX_ADAPTERS; port++) { + retval = piix4_add_adapter(dev, smba, + piix4_main_port_names_sb800[port], + &piix4_main_adapters[port]); + if (retval < 0) + goto error; + + piix4_main_adapters[port]->algo = &piix4_smbus_algorithm_sb800; + + adapdata = i2c_get_adapdata(piix4_main_adapters[port]); + adapdata->sb800_main = true; + adapdata->port = port; + adapdata->mutex = mutex; + } + + return retval; + +error: + dev_err(&dev->dev, + "Error setting up SB800 adapters. Unregistering!\n"); + while (--port >= 0) { + adapdata = i2c_get_adapdata(piix4_main_adapters[port]); + if (adapdata->smba) { + i2c_del_adapter(piix4_main_adapters[port]); + kfree(adapdata); + kfree(piix4_main_adapters[port]); + piix4_main_adapters[port] = NULL; + } + } + + kfree(mutex); + + return retval; +} + static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id) { int retval; @@ -618,20 +726,41 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id) if ((dev->vendor == PCI_VENDOR_ID_ATI && dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS && dev->revision >= 0x40) || - dev->vendor == PCI_VENDOR_ID_AMD) + dev->vendor == PCI_VENDOR_ID_AMD) { + if (!request_region(SB800_PIIX4_SMB_IDX, 2, "smba_idx")) { + dev_err(&dev->dev, + "SMBus base address index region 0x%x already in use!\n", + SB800_PIIX4_SMB_IDX); + return -EBUSY; + } + /* base address location etc changed in SB800 */ retval = piix4_setup_sb800(dev, id, 0); - else - retval = piix4_setup(dev, id); + if (retval < 0) { + release_region(SB800_PIIX4_SMB_IDX, 2); + return retval; + } - /* If no main SMBus found, give up */ - if (retval < 0) - return retval; + /* + * Try to register multiplexed main SMBus adapter, + * give up if we can't + */ + retval = piix4_add_adapters_sb800(dev, retval); + if (retval < 0) { + release_region(SB800_PIIX4_SMB_IDX, 2); + return retval; + } + } else { + retval = piix4_setup(dev, id); + if (retval < 0) + return retval; - /* Try to register main SMBus adapter, give up if we can't */ - retval = piix4_add_adapter(dev, retval, &piix4_main_adapter); - if (retval < 0) - return retval; + /* Try to register main SMBus adapter, give up if we can't */ + retval = piix4_add_adapter(dev, retval, "main", + &piix4_main_adapters[0]); + if (retval < 0) + return retval; + } /* Check for auxiliary SMBus on some AMD chipsets */ retval = -ENODEV; @@ -654,7 +783,8 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id) if (retval > 0) { /* Try to add the aux adapter if it exists, * piix4_add_adapter will clean up if this fails */ - piix4_add_adapter(dev, retval, &piix4_aux_adapter); + piix4_add_adapter(dev, retval, piix4_aux_port_name_sb800, + &piix4_aux_adapter); } return 0; @@ -666,7 +796,13 @@ static void piix4_adap_remove(struct i2c_adapter *adap) if (adapdata->smba) { i2c_del_adapter(adap); - release_region(adapdata->smba, SMBIOSIZE); + if (adapdata->port == 0) { + release_region(adapdata->smba, SMBIOSIZE); + if (adapdata->sb800_main) { + kfree(adapdata->mutex); + release_region(SB800_PIIX4_SMB_IDX, 2); + } + } kfree(adapdata); kfree(adap); } @@ -674,9 +810,13 @@ static void piix4_adap_remove(struct i2c_adapter *adap) static void piix4_remove(struct pci_dev *dev) { - if (piix4_main_adapter) { - piix4_adap_remove(piix4_main_adapter); - piix4_main_adapter = NULL; + int port = PIIX4_MAX_ADAPTERS; + + while (--port >= 0) { + if (piix4_main_adapters[port]) { + piix4_adap_remove(piix4_main_adapters[port]); + piix4_main_adapters[port] = NULL; + } } if (piix4_aux_adapter) { diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c index 599c0d7..1abeadc 100644 --- a/drivers/i2c/busses/i2c-rcar.c +++ b/drivers/i2c/busses/i2c-rcar.c @@ -1,7 +1,8 @@ /* * Driver for the Renesas RCar I2C unit * - * Copyright (C) 2014 Wolfram Sang <wsa@sang-engineering.com> + * Copyright (C) 2014-15 Wolfram Sang <wsa@sang-engineering.com> + * Copyright (C) 2011-2015 Renesas Electronics Corporation * * Copyright (C) 2012-14 Renesas Solutions Corp. * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> @@ -9,9 +10,6 @@ * This file is based on the drivers/i2c/busses/i2c-sh7760.c * (c) 2005-2008 MSC Vertriebsges.m.b.H, Manuel Lauss <mlau@msc-ge.com> * - * This file used out-of-tree driver i2c-rcar.c - * Copyright (C) 2011-2012 Renesas Electronics Corporation - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. @@ -33,7 +31,6 @@ #include <linux/platform_device.h> #include <linux/pm_runtime.h> #include <linux/slab.h> -#include <linux/spinlock.h> /* register offsets */ #define ICSCR 0x00 /* slave ctrl */ @@ -84,6 +81,7 @@ #define RCAR_BUS_PHASE_START (MDBS | MIE | ESG) #define RCAR_BUS_PHASE_DATA (MDBS | MIE) +#define RCAR_BUS_MASK_DATA (~(ESG | FSB) & 0xFF) #define RCAR_BUS_PHASE_STOP (MDBS | MIE | FSB) #define RCAR_IRQ_SEND (MNR | MAL | MST | MAT | MDE) @@ -94,10 +92,13 @@ #define RCAR_IRQ_ACK_RECV (~(MAT | MDR) & 0xFF) #define ID_LAST_MSG (1 << 0) -#define ID_IOERROR (1 << 1) +#define ID_FIRST_MSG (1 << 1) #define ID_DONE (1 << 2) #define ID_ARBLOST (1 << 3) #define ID_NACK (1 << 4) +/* persistent flags */ +#define ID_P_PM_BLOCKED (1 << 31) +#define ID_P_MASK ID_P_PM_BLOCKED enum rcar_i2c_type { I2C_RCAR_GEN1, @@ -108,10 +109,10 @@ enum rcar_i2c_type { struct rcar_i2c_priv { void __iomem *io; struct i2c_adapter adap; - struct i2c_msg *msg; + struct i2c_msg *msg; + int msgs_left; struct clk *clk; - spinlock_t lock; wait_queue_head_t wait; int pos; @@ -124,9 +125,6 @@ struct rcar_i2c_priv { #define rcar_i2c_priv_to_dev(p) ((p)->adap.dev.parent) #define rcar_i2c_is_recv(p) ((p)->msg->flags & I2C_M_RD) -#define rcar_i2c_flags_set(p, f) ((p)->flags |= (f)) -#define rcar_i2c_flags_has(p, f) ((p)->flags & (f)) - #define LOOP_TIMEOUT 1024 @@ -144,9 +142,10 @@ static void rcar_i2c_init(struct rcar_i2c_priv *priv) { /* reset master mode */ rcar_i2c_write(priv, ICMIER, 0); - rcar_i2c_write(priv, ICMCR, 0); + rcar_i2c_write(priv, ICMCR, MDBS); rcar_i2c_write(priv, ICMSR, 0); - rcar_i2c_write(priv, ICMAR, 0); + /* start clock */ + rcar_i2c_write(priv, ICCCR, priv->icccr); } static int rcar_i2c_bus_barrier(struct rcar_i2c_priv *priv) @@ -163,15 +162,17 @@ static int rcar_i2c_bus_barrier(struct rcar_i2c_priv *priv) return -EBUSY; } -static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv, - u32 bus_speed, - struct device *dev) +static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv, struct i2c_timings *t) { - u32 scgd, cdf; - u32 round, ick; - u32 scl; - u32 cdf_width; + u32 scgd, cdf, round, ick, sum, scl, cdf_width; unsigned long rate; + struct device *dev = rcar_i2c_priv_to_dev(priv); + + /* Fall back to previously used values if not supplied */ + t->bus_freq_hz = t->bus_freq_hz ?: 100000; + t->scl_fall_ns = t->scl_fall_ns ?: 35; + t->scl_rise_ns = t->scl_rise_ns ?: 200; + t->scl_int_delay_ns = t->scl_int_delay_ns ?: 50; switch (priv->devtype) { case I2C_RCAR_GEN1: @@ -195,9 +196,9 @@ static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv, * SCL = ick / (20 + SCGD * 8 + F[(ticf + tr + intd) * ick]) * * ick : I2C internal clock < 20 MHz - * ticf : I2C SCL falling time = 35 ns here - * tr : I2C SCL rising time = 200 ns here - * intd : LSI internal delay = 50 ns here + * ticf : I2C SCL falling time + * tr : I2C SCL rising time + * intd : LSI internal delay * clkp : peripheral_clk * F[] : integer up-valuation */ @@ -213,12 +214,12 @@ static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv, * it is impossible to calculate large scale * number on u32. separate it * - * F[(ticf + tr + intd) * ick] - * = F[(35 + 200 + 50)ns * ick] - * = F[285 * ick / 1000000000] - * = F[(ick / 1000000) * 285 / 1000] + * F[(ticf + tr + intd) * ick] with sum = (ticf + tr + intd) + * = F[sum * ick / 1000000000] + * = F[(ick / 1000000) * sum / 1000] */ - round = (ick + 500000) / 1000000 * 285; + sum = t->scl_fall_ns + t->scl_rise_ns + t->scl_int_delay_ns; + round = (ick + 500000) / 1000000 * sum; round = (round + 500) / 1000; /* @@ -235,7 +236,7 @@ static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv, */ for (scgd = 0; scgd < 0x40; scgd++) { scl = ick / (20 + (scgd * 8) + round); - if (scl <= bus_speed) + if (scl <= t->bus_freq_hz) goto scgd_find; } dev_err(dev, "it is impossible to calculate best SCL\n"); @@ -243,11 +244,9 @@ static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv, scgd_find: dev_dbg(dev, "clk %d/%d(%lu), round %u, CDF:0x%x, SCGD: 0x%x\n", - scl, bus_speed, clk_get_rate(priv->clk), round, cdf, scgd); + scl, t->bus_freq_hz, clk_get_rate(priv->clk), round, cdf, scgd); - /* - * keep icccr value - */ + /* keep icccr value */ priv->icccr = scgd << cdf_width | cdf; return 0; @@ -257,33 +256,44 @@ static void rcar_i2c_prepare_msg(struct rcar_i2c_priv *priv) { int read = !!rcar_i2c_is_recv(priv); + priv->pos = 0; + if (priv->msgs_left == 1) + priv->flags |= ID_LAST_MSG; + rcar_i2c_write(priv, ICMAR, (priv->msg->addr << 1) | read); - rcar_i2c_write(priv, ICMSR, 0); - rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_START); + /* + * We don't have a testcase but the HW engineers say that the write order + * of ICMSR and ICMCR depends on whether we issue START or REP_START. Since + * it didn't cause a drawback for me, let's rather be safe than sorry. + */ + if (priv->flags & ID_FIRST_MSG) { + rcar_i2c_write(priv, ICMSR, 0); + rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_START); + } else { + rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_START); + rcar_i2c_write(priv, ICMSR, 0); + } rcar_i2c_write(priv, ICMIER, read ? RCAR_IRQ_RECV : RCAR_IRQ_SEND); } +static void rcar_i2c_next_msg(struct rcar_i2c_priv *priv) +{ + priv->msg++; + priv->msgs_left--; + priv->flags &= ID_P_MASK; + rcar_i2c_prepare_msg(priv); +} + /* * interrupt functions */ -static int rcar_i2c_irq_send(struct rcar_i2c_priv *priv, u32 msr) +static void rcar_i2c_irq_send(struct rcar_i2c_priv *priv, u32 msr) { struct i2c_msg *msg = priv->msg; - /* - * FIXME - * sometimes, unknown interrupt happened. - * Do nothing - */ + /* FIXME: sometimes, unknown interrupt happened. Do nothing */ if (!(msr & MDE)) - return 0; - - /* - * If address transfer phase finished, - * goto data phase. - */ - if (msr & MAT) - rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_DATA); + return; if (priv->pos < msg->len) { /* @@ -305,67 +315,50 @@ static int rcar_i2c_irq_send(struct rcar_i2c_priv *priv, u32 msr) * [ICRXTX] -> [SHIFT] -> [I2C bus] */ - if (priv->flags & ID_LAST_MSG) + if (priv->flags & ID_LAST_MSG) { /* * If current msg is the _LAST_ msg, * prepare stop condition here. * ID_DONE will be set on STOP irq. */ rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_STOP); - else - /* - * If current msg is _NOT_ last msg, - * it doesn't call stop phase. - * thus, there is no STOP irq. - * return ID_DONE here. - */ - return ID_DONE; + } else { + rcar_i2c_next_msg(priv); + return; + } } rcar_i2c_write(priv, ICMSR, RCAR_IRQ_ACK_SEND); - - return 0; } -static int rcar_i2c_irq_recv(struct rcar_i2c_priv *priv, u32 msr) +static void rcar_i2c_irq_recv(struct rcar_i2c_priv *priv, u32 msr) { struct i2c_msg *msg = priv->msg; - /* - * FIXME - * sometimes, unknown interrupt happened. - * Do nothing - */ + /* FIXME: sometimes, unknown interrupt happened. Do nothing */ if (!(msr & MDR)) - return 0; + return; if (msr & MAT) { - /* - * Address transfer phase finished, - * but, there is no data at this point. - * Do nothing. - */ + /* Address transfer phase finished, but no data at this point. */ } else if (priv->pos < msg->len) { - /* - * get received data - */ + /* get received data */ msg->buf[priv->pos] = rcar_i2c_read(priv, ICRXTX); priv->pos++; } /* - * If next received data is the _LAST_, - * go to STOP phase, - * otherwise, go to DATA phase. + * If next received data is the _LAST_, go to STOP phase. Might be + * overwritten by REP START when setting up a new msg. Not elegant + * but the only stable sequence for REP START I have found so far. */ if (priv->pos + 1 >= msg->len) rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_STOP); - else - rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_DATA); - - rcar_i2c_write(priv, ICMSR, RCAR_IRQ_ACK_RECV); - return 0; + if (priv->pos == msg->len && !(priv->flags & ID_LAST_MSG)) + rcar_i2c_next_msg(priv); + else + rcar_i2c_write(priv, ICMSR, RCAR_IRQ_ACK_RECV); } static bool rcar_i2c_slave_irq(struct rcar_i2c_priv *priv) @@ -426,62 +419,57 @@ static bool rcar_i2c_slave_irq(struct rcar_i2c_priv *priv) static irqreturn_t rcar_i2c_irq(int irq, void *ptr) { struct rcar_i2c_priv *priv = ptr; - irqreturn_t result = IRQ_HANDLED; - u32 msr; - - /*-------------- spin lock -----------------*/ - spin_lock(&priv->lock); + u32 msr, val; - if (rcar_i2c_slave_irq(priv)) - goto exit; + /* Clear START or STOP as soon as we can */ + val = rcar_i2c_read(priv, ICMCR); + rcar_i2c_write(priv, ICMCR, val & RCAR_BUS_MASK_DATA); msr = rcar_i2c_read(priv, ICMSR); /* Only handle interrupts that are currently enabled */ msr &= rcar_i2c_read(priv, ICMIER); if (!msr) { - result = IRQ_NONE; - goto exit; + if (rcar_i2c_slave_irq(priv)) + return IRQ_HANDLED; + + return IRQ_NONE; } /* Arbitration lost */ if (msr & MAL) { - rcar_i2c_flags_set(priv, (ID_DONE | ID_ARBLOST)); + priv->flags |= ID_DONE | ID_ARBLOST; goto out; } /* Nack */ if (msr & MNR) { - /* go to stop phase */ - rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_STOP); + /* HW automatically sends STOP after received NACK */ rcar_i2c_write(priv, ICMIER, RCAR_IRQ_STOP); - rcar_i2c_flags_set(priv, ID_NACK); + priv->flags |= ID_NACK; goto out; } /* Stop */ if (msr & MST) { - rcar_i2c_flags_set(priv, ID_DONE); + priv->msgs_left--; /* The last message also made it */ + priv->flags |= ID_DONE; goto out; } if (rcar_i2c_is_recv(priv)) - rcar_i2c_flags_set(priv, rcar_i2c_irq_recv(priv, msr)); + rcar_i2c_irq_recv(priv, msr); else - rcar_i2c_flags_set(priv, rcar_i2c_irq_send(priv, msr)); + rcar_i2c_irq_send(priv, msr); out: - if (rcar_i2c_flags_has(priv, ID_DONE)) { + if (priv->flags & ID_DONE) { rcar_i2c_write(priv, ICMIER, 0); rcar_i2c_write(priv, ICMSR, 0); wake_up(&priv->wait); } -exit: - spin_unlock(&priv->lock); - /*-------------- spin unlock -----------------*/ - - return result; + return IRQ_HANDLED; } static int rcar_i2c_master_xfer(struct i2c_adapter *adap, @@ -490,22 +478,11 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap, { struct rcar_i2c_priv *priv = i2c_get_adapdata(adap); struct device *dev = rcar_i2c_priv_to_dev(priv); - unsigned long flags; int i, ret; - long timeout; + long time_left; pm_runtime_get_sync(dev); - /*-------------- spin lock -----------------*/ - spin_lock_irqsave(&priv->lock, flags); - - rcar_i2c_init(priv); - /* start clock */ - rcar_i2c_write(priv, ICCCR, priv->icccr); - - spin_unlock_irqrestore(&priv->lock, flags); - /*-------------- spin unlock -----------------*/ - ret = rcar_i2c_bus_barrier(priv); if (ret < 0) goto out; @@ -514,48 +491,27 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap, /* This HW can't send STOP after address phase */ if (msgs[i].len == 0) { ret = -EOPNOTSUPP; - break; - } - - /*-------------- spin lock -----------------*/ - spin_lock_irqsave(&priv->lock, flags); - - /* init each data */ - priv->msg = &msgs[i]; - priv->pos = 0; - priv->flags = 0; - if (i == num - 1) - rcar_i2c_flags_set(priv, ID_LAST_MSG); - - rcar_i2c_prepare_msg(priv); - - spin_unlock_irqrestore(&priv->lock, flags); - /*-------------- spin unlock -----------------*/ - - timeout = wait_event_timeout(priv->wait, - rcar_i2c_flags_has(priv, ID_DONE), - adap->timeout); - if (!timeout) { - ret = -ETIMEDOUT; - break; - } - - if (rcar_i2c_flags_has(priv, ID_NACK)) { - ret = -ENXIO; - break; - } - - if (rcar_i2c_flags_has(priv, ID_ARBLOST)) { - ret = -EAGAIN; - break; - } - - if (rcar_i2c_flags_has(priv, ID_IOERROR)) { - ret = -EIO; - break; + goto out; } + } - ret = i + 1; /* The number of transfer */ + /* init first message */ + priv->msg = msgs; + priv->msgs_left = num; + priv->flags = (priv->flags & ID_P_MASK) | ID_FIRST_MSG; + rcar_i2c_prepare_msg(priv); + + time_left = wait_event_timeout(priv->wait, priv->flags & ID_DONE, + num * adap->timeout); + if (!time_left) { + rcar_i2c_init(priv); + ret = -ETIMEDOUT; + } else if (priv->flags & ID_NACK) { + ret = -ENXIO; + } else if (priv->flags & ID_ARBLOST) { + ret = -EAGAIN; + } else { + ret = num - priv->msgs_left; /* The number of transfer */ } out: pm_runtime_put(dev); @@ -637,7 +593,7 @@ static int rcar_i2c_probe(struct platform_device *pdev) struct i2c_adapter *adap; struct resource *res; struct device *dev = &pdev->dev; - u32 bus_speed; + struct i2c_timings i2c_t; int irq, ret; priv = devm_kzalloc(dev, sizeof(struct rcar_i2c_priv), GFP_KERNEL); @@ -650,23 +606,13 @@ static int rcar_i2c_probe(struct platform_device *pdev) return PTR_ERR(priv->clk); } - bus_speed = 100000; /* default 100 kHz */ - of_property_read_u32(dev->of_node, "clock-frequency", &bus_speed); - - priv->devtype = (enum rcar_i2c_type)of_match_device(rcar_i2c_dt_ids, dev)->data; - - ret = rcar_i2c_clock_calculate(priv, bus_speed, dev); - if (ret < 0) - return ret; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); priv->io = devm_ioremap_resource(dev, res); if (IS_ERR(priv->io)) return PTR_ERR(priv->io); - irq = platform_get_irq(pdev, 0); + priv->devtype = (enum rcar_i2c_type)of_match_device(rcar_i2c_dt_ids, dev)->data; init_waitqueue_head(&priv->wait); - spin_lock_init(&priv->lock); adap = &priv->adap; adap->nr = pdev->id; @@ -678,26 +624,47 @@ static int rcar_i2c_probe(struct platform_device *pdev) i2c_set_adapdata(adap, priv); strlcpy(adap->name, pdev->name, sizeof(adap->name)); - ret = devm_request_irq(dev, irq, rcar_i2c_irq, 0, - dev_name(dev), priv); + i2c_parse_fw_timings(dev, &i2c_t, false); + + pm_runtime_enable(dev); + pm_runtime_get_sync(dev); + ret = rcar_i2c_clock_calculate(priv, &i2c_t); + if (ret < 0) + goto out_pm_put; + + rcar_i2c_init(priv); + + /* Don't suspend when multi-master to keep arbitration working */ + if (of_property_read_bool(dev->of_node, "multi-master")) + priv->flags |= ID_P_PM_BLOCKED; + else + pm_runtime_put(dev); + + + irq = platform_get_irq(pdev, 0); + ret = devm_request_irq(dev, irq, rcar_i2c_irq, 0, dev_name(dev), priv); if (ret < 0) { dev_err(dev, "cannot get irq %d\n", irq); - return ret; + goto out_pm_disable; } - pm_runtime_enable(dev); platform_set_drvdata(pdev, priv); ret = i2c_add_numbered_adapter(adap); if (ret < 0) { dev_err(dev, "reg adap failed: %d\n", ret); - pm_runtime_disable(dev); - return ret; + goto out_pm_disable; } dev_info(dev, "probed\n"); return 0; + + out_pm_put: + pm_runtime_put(dev); + out_pm_disable: + pm_runtime_disable(dev); + return ret; } static int rcar_i2c_remove(struct platform_device *pdev) @@ -706,6 +673,8 @@ static int rcar_i2c_remove(struct platform_device *pdev) struct device *dev = &pdev->dev; i2c_del_adapter(&priv->adap); + if (priv->flags & ID_P_PM_BLOCKED) + pm_runtime_put(dev); pm_runtime_disable(dev); return 0; diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 5df8196..362a6de5 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -784,7 +784,6 @@ static int s3c24xx_i2c_xfer(struct i2c_adapter *adap, int retry; int ret; - pm_runtime_get_sync(&adap->dev); ret = clk_enable(i2c->clk); if (ret) return ret; @@ -795,7 +794,6 @@ static int s3c24xx_i2c_xfer(struct i2c_adapter *adap, if (ret != -EAGAIN) { clk_disable(i2c->clk); - pm_runtime_put(&adap->dev); return ret; } @@ -805,7 +803,6 @@ static int s3c24xx_i2c_xfer(struct i2c_adapter *adap, } clk_disable(i2c->clk); - pm_runtime_put(&adap->dev); return -EREMOTEIO; } @@ -1256,8 +1253,6 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) return ret; } - pm_runtime_enable(&i2c->adap.dev); - dev_info(&pdev->dev, "%s: S3C I2C adapter\n", dev_name(&i2c->adap.dev)); return 0; } @@ -1273,7 +1268,6 @@ static int s3c24xx_i2c_remove(struct platform_device *pdev) clk_unprepare(i2c->clk); - pm_runtime_disable(&i2c->adap.dev); pm_runtime_disable(&pdev->dev); s3c24xx_i2c_deregister_cpufreq(i2c); diff --git a/drivers/i2c/busses/i2c-st.c b/drivers/i2c/busses/i2c-st.c index 25020ec..6ee7715 100644 --- a/drivers/i2c/busses/i2c-st.c +++ b/drivers/i2c/busses/i2c-st.c @@ -708,8 +708,7 @@ static int st_i2c_xfer(struct i2c_adapter *i2c_adap, #ifdef CONFIG_PM_SLEEP static int st_i2c_suspend(struct device *dev) { - struct platform_device *pdev = - container_of(dev, struct platform_device, dev); + struct platform_device *pdev = to_platform_device(dev); struct st_i2c_dev *i2c_dev = platform_get_drvdata(pdev); if (i2c_dev->busy) diff --git a/drivers/i2c/busses/i2c-taos-evm.c b/drivers/i2c/busses/i2c-taos-evm.c index 4c7fc2d..210ca82 100644 --- a/drivers/i2c/busses/i2c-taos-evm.c +++ b/drivers/i2c/busses/i2c-taos-evm.c @@ -130,7 +130,13 @@ static int taos_smbus_xfer(struct i2c_adapter *adapter, u16 addr, return 0; } else { if (p[0] == 'x') { - data->byte = simple_strtol(p + 1, NULL, 16); + /* + * Voluntarily dropping error code of kstrtou8 since all + * error code that it could return are invalid according + * to Documentation/i2c/fault-codes. + */ + if (kstrtou8(p + 1, 16, &data->byte)) + return -EPROTO; return 0; } } diff --git a/drivers/i2c/busses/i2c-uniphier-f.c b/drivers/i2c/busses/i2c-uniphier-f.c index e8d03bc..f3e5ff8 100644 --- a/drivers/i2c/busses/i2c-uniphier-f.c +++ b/drivers/i2c/busses/i2c-uniphier-f.c @@ -466,6 +466,11 @@ static int uniphier_fi2c_clk_init(struct device *dev, if (of_property_read_u32(np, "clock-frequency", &bus_speed)) bus_speed = UNIPHIER_FI2C_DEFAULT_SPEED; + if (!bus_speed) { + dev_err(dev, "clock-freqyency should not be zero\n"); + return -EINVAL; + } + if (bus_speed > UNIPHIER_FI2C_MAX_SPEED) bus_speed = UNIPHIER_FI2C_MAX_SPEED; @@ -481,6 +486,10 @@ static int uniphier_fi2c_clk_init(struct device *dev, return ret; clk_rate = clk_get_rate(priv->clk); + if (!clk_rate) { + dev_err(dev, "input clock rate should not be zero\n"); + return -EINVAL; + } uniphier_fi2c_reset(priv); @@ -531,7 +540,7 @@ static int uniphier_fi2c_probe(struct platform_device *pdev) ret = uniphier_fi2c_clk_init(dev, priv); if (ret) - return ret; + goto err; ret = devm_request_irq(dev, irq, uniphier_fi2c_interrupt, 0, pdev->name, priv); diff --git a/drivers/i2c/busses/i2c-uniphier.c b/drivers/i2c/busses/i2c-uniphier.c index e3c3861..1f4f3f5 100644 --- a/drivers/i2c/busses/i2c-uniphier.c +++ b/drivers/i2c/busses/i2c-uniphier.c @@ -327,6 +327,11 @@ static int uniphier_i2c_clk_init(struct device *dev, if (of_property_read_u32(np, "clock-frequency", &bus_speed)) bus_speed = UNIPHIER_I2C_DEFAULT_SPEED; + if (!bus_speed) { + dev_err(dev, "clock-freqyency should not be zero\n"); + return -EINVAL; + } + if (bus_speed > UNIPHIER_I2C_MAX_SPEED) bus_speed = UNIPHIER_I2C_MAX_SPEED; @@ -342,6 +347,10 @@ static int uniphier_i2c_clk_init(struct device *dev, return ret; clk_rate = clk_get_rate(priv->clk); + if (!clk_rate) { + dev_err(dev, "input clock rate should not be zero\n"); + return -EINVAL; + } uniphier_i2c_reset(priv, true); @@ -388,7 +397,7 @@ static int uniphier_i2c_probe(struct platform_device *pdev) ret = uniphier_i2c_clk_init(dev, priv); if (ret) - return ret; + goto err; ret = devm_request_irq(dev, irq, uniphier_i2c_interrupt, 0, pdev->name, priv); diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c index 0b20449..6efd200 100644 --- a/drivers/i2c/busses/i2c-xiic.c +++ b/drivers/i2c/busses/i2c-xiic.c @@ -70,7 +70,7 @@ struct xiic_i2c { wait_queue_head_t wait; struct i2c_adapter adap; struct i2c_msg *tx_msg; - spinlock_t lock; + struct mutex lock; unsigned int tx_pos; unsigned int nmsgs; enum xilinx_i2c_state state; @@ -369,7 +369,7 @@ static irqreturn_t xiic_process(int irq, void *dev_id) * To find which interrupts are pending; AND interrupts pending with * interrupts masked. */ - spin_lock(&i2c->lock); + mutex_lock(&i2c->lock); isr = xiic_getreg32(i2c, XIIC_IISR_OFFSET); ier = xiic_getreg32(i2c, XIIC_IIER_OFFSET); pend = isr & ier; @@ -497,7 +497,7 @@ out: dev_dbg(i2c->adap.dev.parent, "%s clr: 0x%x\n", __func__, clr); xiic_setreg32(i2c, XIIC_IISR_OFFSET, clr); - spin_unlock(&i2c->lock); + mutex_unlock(&i2c->lock); return IRQ_HANDLED; } @@ -662,10 +662,10 @@ static void __xiic_start_xfer(struct xiic_i2c *i2c) static void xiic_start_xfer(struct xiic_i2c *i2c) { - spin_lock(&i2c->lock); + mutex_lock(&i2c->lock); xiic_reinit(i2c); __xiic_start_xfer(i2c); - spin_unlock(&i2c->lock); + mutex_unlock(&i2c->lock); } static int xiic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) @@ -745,7 +745,7 @@ static int xiic_i2c_probe(struct platform_device *pdev) i2c->adap.dev.parent = &pdev->dev; i2c->adap.dev.of_node = pdev->dev.of_node; - spin_lock_init(&i2c->lock); + mutex_init(&i2c->lock); init_waitqueue_head(&i2c->wait); ret = devm_request_threaded_irq(&pdev->dev, irq, xiic_isr, diff --git a/drivers/i2c/busses/i2c-xlr.c b/drivers/i2c/busses/i2c-xlr.c index 8b36bcf..613c3a4 100644 --- a/drivers/i2c/busses/i2c-xlr.c +++ b/drivers/i2c/busses/i2c-xlr.c @@ -17,6 +17,10 @@ #include <linux/i2c.h> #include <linux/io.h> #include <linux/platform_device.h> +#include <linux/of_device.h> +#include <linux/clk.h> +#include <linux/interrupt.h> +#include <linux/wait.h> /* XLR I2C REGISTERS */ #define XLR_I2C_CFG 0x00 @@ -30,6 +34,10 @@ #define XLR_I2C_BYTECNT 0x08 #define XLR_I2C_HDSTATIM 0x09 +/* Sigma Designs additional registers */ +#define XLR_I2C_INT_EN 0x09 +#define XLR_I2C_INT_STAT 0x0a + /* XLR I2C REGISTERS FLAGS */ #define XLR_I2C_BUS_BUSY 0x01 #define XLR_I2C_SDOEMPTY 0x02 @@ -63,11 +71,98 @@ static inline u32 xlr_i2c_rdreg(u32 __iomem *base, unsigned int reg) return __raw_readl(base + reg); } +#define XLR_I2C_FLAG_IRQ 1 + +struct xlr_i2c_config { + u32 flags; /* optional feature support */ + u32 status_busy; /* value of STATUS[0] when busy */ + u32 cfg_extra; /* extra CFG bits to set */ +}; + struct xlr_i2c_private { struct i2c_adapter adap; u32 __iomem *iobase; + int irq; + int pos; + struct i2c_msg *msg; + const struct xlr_i2c_config *cfg; + wait_queue_head_t wait; + struct clk *clk; }; +static int xlr_i2c_busy(struct xlr_i2c_private *priv, u32 status) +{ + return (status & XLR_I2C_BUS_BUSY) == priv->cfg->status_busy; +} + +static int xlr_i2c_idle(struct xlr_i2c_private *priv) +{ + return !xlr_i2c_busy(priv, xlr_i2c_rdreg(priv->iobase, XLR_I2C_STATUS)); +} + +static int xlr_i2c_wait(struct xlr_i2c_private *priv, unsigned long timeout) +{ + int status; + int t; + + t = wait_event_timeout(priv->wait, xlr_i2c_idle(priv), + msecs_to_jiffies(timeout)); + if (!t) + return -ETIMEDOUT; + + status = xlr_i2c_rdreg(priv->iobase, XLR_I2C_STATUS); + + return status & XLR_I2C_ACK_ERR ? -EIO : 0; +} + +static void xlr_i2c_tx_irq(struct xlr_i2c_private *priv, u32 status) +{ + struct i2c_msg *msg = priv->msg; + + if (status & XLR_I2C_SDOEMPTY) + xlr_i2c_wreg(priv->iobase, XLR_I2C_DATAOUT, + msg->buf[priv->pos++]); +} + +static void xlr_i2c_rx_irq(struct xlr_i2c_private *priv, u32 status) +{ + struct i2c_msg *msg = priv->msg; + + if (status & XLR_I2C_RXRDY) + msg->buf[priv->pos++] = + xlr_i2c_rdreg(priv->iobase, XLR_I2C_DATAIN); +} + +static irqreturn_t xlr_i2c_irq(int irq, void *dev_id) +{ + struct xlr_i2c_private *priv = dev_id; + struct i2c_msg *msg = priv->msg; + u32 int_stat, status; + + int_stat = xlr_i2c_rdreg(priv->iobase, XLR_I2C_INT_STAT); + if (!int_stat) + return IRQ_NONE; + + xlr_i2c_wreg(priv->iobase, XLR_I2C_INT_STAT, int_stat); + + if (!msg) + return IRQ_HANDLED; + + status = xlr_i2c_rdreg(priv->iobase, XLR_I2C_STATUS); + + if (priv->pos < msg->len) { + if (msg->flags & I2C_M_RD) + xlr_i2c_rx_irq(priv, status); + else + xlr_i2c_tx_irq(priv, status); + } + + if (!xlr_i2c_busy(priv, status)) + wake_up(&priv->wait); + + return IRQ_HANDLED; +} + static int xlr_i2c_tx(struct xlr_i2c_private *priv, u16 len, u8 *buf, u16 addr) { @@ -75,37 +170,48 @@ static int xlr_i2c_tx(struct xlr_i2c_private *priv, u16 len, unsigned long timeout, stoptime, checktime; u32 i2c_status; int pos, timedout; - u8 offset, byte; + u8 offset; + u32 xfer; + + if (!len) + return -EOPNOTSUPP; offset = buf[0]; xlr_i2c_wreg(priv->iobase, XLR_I2C_ADDR, offset); xlr_i2c_wreg(priv->iobase, XLR_I2C_DEVADDR, addr); - xlr_i2c_wreg(priv->iobase, XLR_I2C_CFG, XLR_I2C_CFG_ADDR); - xlr_i2c_wreg(priv->iobase, XLR_I2C_BYTECNT, len - 1); + xlr_i2c_wreg(priv->iobase, XLR_I2C_CFG, + XLR_I2C_CFG_ADDR | priv->cfg->cfg_extra); timeout = msecs_to_jiffies(XLR_I2C_TIMEOUT); stoptime = jiffies + timeout; timedout = 0; - pos = 1; -retry: + if (len == 1) { - xlr_i2c_wreg(priv->iobase, XLR_I2C_STARTXFR, - XLR_I2C_STARTXFR_ND); + xlr_i2c_wreg(priv->iobase, XLR_I2C_BYTECNT, len - 1); + xfer = XLR_I2C_STARTXFR_ND; + pos = 1; } else { - xlr_i2c_wreg(priv->iobase, XLR_I2C_DATAOUT, buf[pos]); - xlr_i2c_wreg(priv->iobase, XLR_I2C_STARTXFR, - XLR_I2C_STARTXFR_WR); + xlr_i2c_wreg(priv->iobase, XLR_I2C_BYTECNT, len - 2); + xlr_i2c_wreg(priv->iobase, XLR_I2C_DATAOUT, buf[1]); + xfer = XLR_I2C_STARTXFR_WR; + pos = 2; } + priv->pos = pos; + +retry: + /* retry can only happen on the first byte */ + xlr_i2c_wreg(priv->iobase, XLR_I2C_STARTXFR, xfer); + + if (priv->irq > 0) + return xlr_i2c_wait(priv, XLR_I2C_TIMEOUT * len); + while (!timedout) { checktime = jiffies; i2c_status = xlr_i2c_rdreg(priv->iobase, XLR_I2C_STATUS); - if (i2c_status & XLR_I2C_SDOEMPTY) { - pos++; - /* need to do a empty dataout after the last byte */ - byte = (pos < len) ? buf[pos] : 0; - xlr_i2c_wreg(priv->iobase, XLR_I2C_DATAOUT, byte); + if ((i2c_status & XLR_I2C_SDOEMPTY) && pos < len) { + xlr_i2c_wreg(priv->iobase, XLR_I2C_DATAOUT, buf[pos++]); /* reset timeout on successful xmit */ stoptime = jiffies + timeout; @@ -121,7 +227,7 @@ retry: if (i2c_status & XLR_I2C_ACK_ERR) return -EIO; - if ((i2c_status & XLR_I2C_BUS_BUSY) == 0 && pos >= len) + if (!xlr_i2c_busy(priv, i2c_status) && pos >= len) return 0; } dev_err(&adap->dev, "I2C transmit timeout\n"); @@ -134,12 +240,17 @@ static int xlr_i2c_rx(struct xlr_i2c_private *priv, u16 len, u8 *buf, u16 addr) u32 i2c_status; unsigned long timeout, stoptime, checktime; int nbytes, timedout; - u8 byte; - xlr_i2c_wreg(priv->iobase, XLR_I2C_CFG, XLR_I2C_CFG_NOADDR); - xlr_i2c_wreg(priv->iobase, XLR_I2C_BYTECNT, len); + if (!len) + return -EOPNOTSUPP; + + xlr_i2c_wreg(priv->iobase, XLR_I2C_CFG, + XLR_I2C_CFG_NOADDR | priv->cfg->cfg_extra); + xlr_i2c_wreg(priv->iobase, XLR_I2C_BYTECNT, len - 1); xlr_i2c_wreg(priv->iobase, XLR_I2C_DEVADDR, addr); + priv->pos = 0; + timeout = msecs_to_jiffies(XLR_I2C_TIMEOUT); stoptime = jiffies + timeout; timedout = 0; @@ -147,18 +258,18 @@ static int xlr_i2c_rx(struct xlr_i2c_private *priv, u16 len, u8 *buf, u16 addr) retry: xlr_i2c_wreg(priv->iobase, XLR_I2C_STARTXFR, XLR_I2C_STARTXFR_RD); + if (priv->irq > 0) + return xlr_i2c_wait(priv, XLR_I2C_TIMEOUT * len); + while (!timedout) { checktime = jiffies; i2c_status = xlr_i2c_rdreg(priv->iobase, XLR_I2C_STATUS); if (i2c_status & XLR_I2C_RXRDY) { - if (nbytes > len) + if (nbytes >= len) return -EIO; /* should not happen */ - /* we need to do a dummy datain when nbytes == len */ - byte = xlr_i2c_rdreg(priv->iobase, XLR_I2C_DATAIN); - if (nbytes < len) - buf[nbytes] = byte; - nbytes++; + buf[nbytes++] = + xlr_i2c_rdreg(priv->iobase, XLR_I2C_DATAIN); /* reset timeout on successful read */ stoptime = jiffies + timeout; @@ -174,7 +285,7 @@ retry: if (i2c_status & XLR_I2C_ACK_ERR) return -EIO; - if ((i2c_status & XLR_I2C_BUS_BUSY) == 0) + if (!xlr_i2c_busy(priv, i2c_status)) return 0; } @@ -190,8 +301,17 @@ static int xlr_i2c_xfer(struct i2c_adapter *adap, int ret = 0; struct xlr_i2c_private *priv = i2c_get_adapdata(adap); + ret = clk_enable(priv->clk); + if (ret) + return ret; + + if (priv->irq) + xlr_i2c_wreg(priv->iobase, XLR_I2C_INT_EN, 0xf); + + for (i = 0; ret == 0 && i < num; i++) { msg = &msgs[i]; + priv->msg = msg; if (msg->flags & I2C_M_RD) ret = xlr_i2c_rx(priv, msg->len, &msg->buf[0], msg->addr); @@ -200,13 +320,19 @@ static int xlr_i2c_xfer(struct i2c_adapter *adap, msg->addr); } + if (priv->irq) + xlr_i2c_wreg(priv->iobase, XLR_I2C_INT_EN, 0); + + clk_disable(priv->clk); + priv->msg = NULL; + return (ret != 0) ? ret : num; } static u32 xlr_func(struct i2c_adapter *adap) { /* Emulate SMBUS over I2C */ - return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_I2C; + return (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK) | I2C_FUNC_I2C; } static struct i2c_algorithm xlr_i2c_algo = { @@ -214,22 +340,89 @@ static struct i2c_algorithm xlr_i2c_algo = { .functionality = xlr_func, }; +static const struct xlr_i2c_config xlr_i2c_config_default = { + .status_busy = XLR_I2C_BUS_BUSY, + .cfg_extra = 0, +}; + +static const struct xlr_i2c_config xlr_i2c_config_tangox = { + .flags = XLR_I2C_FLAG_IRQ, + .status_busy = 0, + .cfg_extra = 1 << 8, +}; + +static const struct of_device_id xlr_i2c_dt_ids[] = { + { + .compatible = "sigma,smp8642-i2c", + .data = &xlr_i2c_config_tangox, + }, + { } +}; + static int xlr_i2c_probe(struct platform_device *pdev) { + const struct of_device_id *match; struct xlr_i2c_private *priv; struct resource *res; + struct clk *clk; + unsigned long clk_rate; + unsigned long clk_div; + u32 busfreq; + int irq; int ret; priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; + match = of_match_device(xlr_i2c_dt_ids, &pdev->dev); + if (match) + priv->cfg = match->data; + else + priv->cfg = &xlr_i2c_config_default; + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); priv->iobase = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(priv->iobase)) return PTR_ERR(priv->iobase); + irq = platform_get_irq(pdev, 0); + + if (irq > 0 && (priv->cfg->flags & XLR_I2C_FLAG_IRQ)) { + priv->irq = irq; + + xlr_i2c_wreg(priv->iobase, XLR_I2C_INT_EN, 0); + xlr_i2c_wreg(priv->iobase, XLR_I2C_INT_STAT, 0xf); + + ret = devm_request_irq(&pdev->dev, priv->irq, xlr_i2c_irq, + IRQF_SHARED, dev_name(&pdev->dev), + priv); + if (ret) + return ret; + + init_waitqueue_head(&priv->wait); + } + + if (of_property_read_u32(pdev->dev.of_node, "clock-frequency", + &busfreq)) + busfreq = 100000; + + clk = devm_clk_get(&pdev->dev, NULL); + if (!IS_ERR(clk)) { + ret = clk_prepare_enable(clk); + if (ret) + return ret; + + clk_rate = clk_get_rate(clk); + clk_div = DIV_ROUND_UP(clk_rate, 2 * busfreq); + xlr_i2c_wreg(priv->iobase, XLR_I2C_CLKDIV, clk_div); + + clk_disable(clk); + priv->clk = clk; + } + priv->adap.dev.parent = &pdev->dev; + priv->adap.dev.of_node = pdev->dev.of_node; priv->adap.owner = THIS_MODULE; priv->adap.algo_data = priv; priv->adap.algo = &xlr_i2c_algo; @@ -255,6 +448,8 @@ static int xlr_i2c_remove(struct platform_device *pdev) priv = platform_get_drvdata(pdev); i2c_del_adapter(&priv->adap); + clk_unprepare(priv->clk); + return 0; } @@ -263,6 +458,7 @@ static struct platform_driver xlr_i2c_driver = { .remove = xlr_i2c_remove, .driver = { .name = "xlr-i2cbus", + .of_match_table = xlr_i2c_dt_ids, }, }; diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index ba8eb08..ffe715d 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -53,6 +53,7 @@ #include <linux/jump_label.h> #include <asm/uaccess.h> #include <linux/err.h> +#include <linux/property.h> #include "i2c-core.h" @@ -1563,6 +1564,7 @@ static int i2c_register_adapter(struct i2c_adapter *adap) dev_dbg(&adap->dev, "adapter [%s] registered\n", adap->name); pm_runtime_no_callbacks(&adap->dev); + pm_runtime_enable(&adap->dev); #ifdef CONFIG_I2C_COMPAT res = class_compat_create_link(i2c_adapter_compat_class, &adap->dev, @@ -1817,6 +1819,8 @@ void i2c_del_adapter(struct i2c_adapter *adap) /* device name is gone after device_unregister */ dev_dbg(&adap->dev, "adapter [%s] unregistered\n", adap->name); + pm_runtime_disable(&adap->dev); + /* wait until all references to the device are gone * * FIXME: This is old code and should ideally be replaced by an @@ -1839,6 +1843,58 @@ void i2c_del_adapter(struct i2c_adapter *adap) } EXPORT_SYMBOL(i2c_del_adapter); +/** + * i2c_parse_fw_timings - get I2C related timing parameters from firmware + * @dev: The device to scan for I2C timing properties + * @t: the i2c_timings struct to be filled with values + * @use_defaults: bool to use sane defaults derived from the I2C specification + * when properties are not found, otherwise use 0 + * + * Scan the device for the generic I2C properties describing timing parameters + * for the signal and fill the given struct with the results. If a property was + * not found and use_defaults was true, then maximum timings are assumed which + * are derived from the I2C specification. If use_defaults is not used, the + * results will be 0, so drivers can apply their own defaults later. The latter + * is mainly intended for avoiding regressions of existing drivers which want + * to switch to this function. New drivers almost always should use the defaults. + */ + +void i2c_parse_fw_timings(struct device *dev, struct i2c_timings *t, bool use_defaults) +{ + int ret; + + memset(t, 0, sizeof(*t)); + + ret = device_property_read_u32(dev, "clock-frequency", &t->bus_freq_hz); + if (ret && use_defaults) + t->bus_freq_hz = 100000; + + ret = device_property_read_u32(dev, "i2c-scl-rising-time-ns", &t->scl_rise_ns); + if (ret && use_defaults) { + if (t->bus_freq_hz <= 100000) + t->scl_rise_ns = 1000; + else if (t->bus_freq_hz <= 400000) + t->scl_rise_ns = 300; + else + t->scl_rise_ns = 120; + } + + ret = device_property_read_u32(dev, "i2c-scl-falling-time-ns", &t->scl_fall_ns); + if (ret && use_defaults) { + if (t->bus_freq_hz <= 400000) + t->scl_fall_ns = 300; + else + t->scl_fall_ns = 120; + } + + device_property_read_u32(dev, "i2c-scl-internal-delay-ns", &t->scl_int_delay_ns); + + ret = device_property_read_u32(dev, "i2c-sda-falling-time-ns", &t->sda_fall_ns); + if (ret && use_defaults) + t->sda_fall_ns = t->scl_fall_ns; +} +EXPORT_SYMBOL_GPL(i2c_parse_fw_timings); + /* ------------------------------------------------------------------------- */ int i2c_for_each_dev(void *data, int (*fn)(struct device *, void *)) |