summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@g5.osdl.org>2005-07-23 17:01:26 -0700
committerLinus Torvalds <torvalds@g5.osdl.org>2005-07-23 17:01:26 -0700
commit2c2a68b84752cb1090fd2456e8b83e5bcc0e73c4 (patch)
treefddb2afa9f3f1c49823ee7cfa7bcc9767e888e79 /drivers
parentc94c0d201f1c1a62184f4f220c1615347aafbee7 (diff)
parent056a8763fc036639441a6dc49b61e57bc632af6e (diff)
downloadop-kernel-dev-2c2a68b84752cb1090fd2456e8b83e5bcc0e73c4.zip
op-kernel-dev-2c2a68b84752cb1090fd2456e8b83e5bcc0e73c4.tar.gz
Merge master.kernel.org:/home/rmk/linux-2.6-serial
Diffstat (limited to 'drivers')
-rw-r--r--drivers/serial/8250_pci.c51
-rw-r--r--drivers/serial/Kconfig7
-rw-r--r--drivers/serial/Makefile1
-rw-r--r--drivers/serial/bast_sio.c80
4 files changed, 31 insertions, 108 deletions
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index de54bdc5..356f555 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -389,6 +389,9 @@ static void __devexit sbs_exit(struct pci_dev *dev)
* - 10x cards have control registers in IO and/or memory space;
* - 20x cards have control registers in standard PCI configuration space.
*
+ * There are also Quartet Serial cards which use Oxford Semiconductor
+ * 16954 quad UART PCI chip clocked by 18.432 MHz quartz.
+ *
* Note: some SIIG cards are probed by the parport_serial object.
*/
@@ -1026,6 +1029,8 @@ enum pci_board_num_t {
pbn_b0_2_921600,
pbn_b0_4_921600,
+ pbn_b0_4_1152000,
+
pbn_b0_bt_1_115200,
pbn_b0_bt_2_115200,
pbn_b0_bt_8_115200,
@@ -1158,6 +1163,12 @@ static struct pci_board pci_boards[] __devinitdata = {
.base_baud = 921600,
.uart_offset = 8,
},
+ [pbn_b0_4_1152000] = {
+ .flags = FL_BASE0,
+ .num_ports = 4,
+ .base_baud = 1152000,
+ .uart_offset = 8,
+ },
[pbn_b0_bt_1_115200] = {
.flags = FL_BASE0|FL_BASE_BARS,
@@ -1755,33 +1766,30 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
static void __devexit pciserial_remove_one(struct pci_dev *dev)
{
struct serial_private *priv = pci_get_drvdata(dev);
+ struct pci_serial_quirk *quirk;
+ int i;
pci_set_drvdata(dev, NULL);
- if (priv) {
- struct pci_serial_quirk *quirk;
- int i;
-
- for (i = 0; i < priv->nr; i++)
- serial8250_unregister_port(priv->line[i]);
+ for (i = 0; i < priv->nr; i++)
+ serial8250_unregister_port(priv->line[i]);
- for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
- if (priv->remapped_bar[i])
- iounmap(priv->remapped_bar[i]);
- priv->remapped_bar[i] = NULL;
- }
+ for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
+ if (priv->remapped_bar[i])
+ iounmap(priv->remapped_bar[i]);
+ priv->remapped_bar[i] = NULL;
+ }
- /*
- * Find the exit quirks.
- */
- quirk = find_quirk(dev);
- if (quirk->exit)
- quirk->exit(dev);
+ /*
+ * Find the exit quirks.
+ */
+ quirk = find_quirk(dev);
+ if (quirk->exit)
+ quirk->exit(dev);
- pci_disable_device(dev);
+ pci_disable_device(dev);
- kfree(priv);
- }
+ kfree(priv);
}
static int pciserial_suspend_one(struct pci_dev *dev, pm_message_t state)
@@ -1978,6 +1986,9 @@ static struct pci_device_id serial_pci_tbl[] = {
PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4, 0, 0,
pbn_b0_4_921600 },
{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
+ PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL, 0, 0,
+ pbn_b0_4_1152000 },
+ { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_4_115200 },
{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952,
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index e0d0a47..97034d3 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -306,13 +306,6 @@ config SERIAL_S3C2410_CONSOLE
your boot loader about how to pass options to the kernel at
boot time.)
-config SERIAL_BAST_SIO
- bool "Support for BAST SuperIO serial ports"
- depends on ARCH_BAST && SERIAL_8250=y
- help
- Support for registerin the SuperIO chip on BAST board with
- the 8250/16550 uart code.
-
config SERIAL_DZ
bool "DECstation DZ serial driver"
depends on MACH_DECSTATION && MIPS32
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 65bd438..11c7dc4 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -44,7 +44,6 @@ obj-$(CONFIG_SERIAL_LH7A40X) += serial_lh7a40x.o
obj-$(CONFIG_SERIAL_AU1X00) += au1x00_uart.o
obj-$(CONFIG_SERIAL_DZ) += dz.o
obj-$(CONFIG_SERIAL_SH_SCI) += sh-sci.o
-obj-$(CONFIG_SERIAL_BAST_SIO) += bast_sio.o
obj-$(CONFIG_SERIAL_SGI_L1_CONSOLE) += sn_console.o
obj-$(CONFIG_SERIAL_CPM) += cpm_uart/
obj-$(CONFIG_SERIAL_IMX) += imx.o
diff --git a/drivers/serial/bast_sio.c b/drivers/serial/bast_sio.c
deleted file mode 100644
index 2b48fab..0000000
--- a/drivers/serial/bast_sio.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/* linux/drivers/serial/bast_sio.c
- *
- * Copyright (c) 2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * http://www.simtec.co.uk/products/EB2410ITX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Modifications:
- * 23-Sep-2004 BJD Added copyright header
- * 23-Sep-2004 BJD Added serial port remove code
-*/
-
-#include <linux/module.h>
-#include <linux/config.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/types.h>
-
-#include <asm/io.h>
-#include <asm/serial.h>
-#include <asm/mach-types.h>
-
-#include <asm/arch/map.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/bast-map.h>
-#include <asm/arch/bast-irq.h>
-
-static int __init serial_bast_register(unsigned long port, unsigned int irq)
-{
- struct serial_struct serial_req;
-
- serial_req.flags = UPF_AUTOPROBE | UPF_SHARE_IRQ;
- serial_req.baud_base = BASE_BAUD;
- serial_req.irq = irq;
- serial_req.io_type = UPIO_MEM;
- serial_req.iomap_base = port;
- serial_req.iomem_base = ioremap(port, 0x10);
- serial_req.iomem_reg_shift = 0;
-
- return register_serial(&serial_req);
-}
-
-#define SERIAL_BASE (S3C2410_CS2 + BAST_PA_SUPERIO)
-
-static int port[2] = { -1, -1 };
-
-static int __init serial_bast_init(void)
-{
- if (machine_is_bast()) {
- port[0] = serial_bast_register(SERIAL_BASE + 0x2f8, IRQ_PCSERIAL1);
- port[1] = serial_bast_register(SERIAL_BASE + 0x3f8, IRQ_PCSERIAL2);
- }
-
- return 0;
-}
-
-static void __exit serial_bast_exit(void)
-{
- if (port[0] != -1)
- unregister_serial(port[0]);
- if (port[1] != -1)
- unregister_serial(port[1]);
-}
-
-
-module_init(serial_bast_init);
-module_exit(serial_bast_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Ben Dooks, ben@simtec.co.uk");
-MODULE_DESCRIPTION("BAST Onboard Serial setup");
-
-
OpenPOWER on IntegriCloud