diff options
author | Alan Cox <alan@linux.intel.com> | 2009-08-19 18:21:44 +0100 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@suse.de> | 2009-09-15 12:02:26 -0700 |
commit | 25ad00bba42d49e37e81e7c449bbcc86a71f2894 (patch) | |
tree | 5c8f45987a45fd0ca30e7b41cebf7bd72a628b40 /drivers | |
parent | 106a47ba0a4fcdfa62e7cd708a4284c03e4db05c (diff) | |
download | op-kernel-dev-25ad00bba42d49e37e81e7c449bbcc86a71f2894.zip op-kernel-dev-25ad00bba42d49e37e81e7c449bbcc86a71f2894.tar.gz |
Staging: et1310: kill pAdapter in favour of a sane name
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/staging/et131x/et1310_eeprom.c | 14 | ||||
-rw-r--r-- | drivers/staging/et131x/et1310_jagcore.c | 20 | ||||
-rw-r--r-- | drivers/staging/et131x/et1310_mac.c | 220 | ||||
-rw-r--r-- | drivers/staging/et131x/et1310_phy.c | 370 | ||||
-rw-r--r-- | drivers/staging/et131x/et1310_pm.c | 46 | ||||
-rw-r--r-- | drivers/staging/et131x/et1310_rx.c | 202 | ||||
-rw-r--r-- | drivers/staging/et131x/et1310_tx.c | 442 | ||||
-rw-r--r-- | drivers/staging/et131x/et131x_config.c | 90 | ||||
-rw-r--r-- | drivers/staging/et131x/et131x_debug.c | 20 | ||||
-rw-r--r-- | drivers/staging/et131x/et131x_initpci.c | 82 | ||||
-rw-r--r-- | drivers/staging/et131x/et131x_isr.c | 44 | ||||
-rw-r--r-- | drivers/staging/et131x/et131x_netdev.c | 38 |
12 files changed, 794 insertions, 794 deletions
diff --git a/drivers/staging/et131x/et1310_eeprom.c b/drivers/staging/et131x/et1310_eeprom.c index 3a81a85..9a6dbd6 100644 --- a/drivers/staging/et131x/et1310_eeprom.c +++ b/drivers/staging/et131x/et1310_eeprom.c @@ -143,7 +143,7 @@ /** * EepromWriteByte - Write a byte to the ET1310's EEPROM - * @pAdapter: pointer to our private adapter structure + * @etdev: pointer to our private adapter structure * @unAddress: the address to write * @bData: the value to write * @unEepronId: the ID of the EEPROM @@ -151,11 +151,11 @@ * * Returns SUCCESS or FAILURE */ -int32_t EepromWriteByte(struct et131x_adapter *pAdapter, uint32_t unAddress, +int32_t EepromWriteByte(struct et131x_adapter *etdev, uint32_t unAddress, uint8_t bData, uint32_t unEepromId, uint32_t unAddressingMode) { - struct pci_dev *pdev = pAdapter->pdev; + struct pci_dev *pdev = etdev->pdev; int32_t nIndex; int32_t nRetries; int32_t nError = false; @@ -292,7 +292,7 @@ int32_t EepromWriteByte(struct et131x_adapter *pAdapter, uint32_t unAddress, * so we do a blind write for load bug. */ if (bStatus & LBCIF_STATUS_GENERAL_ERROR - && pAdapter->RevisionID == 0) { + && etdev->RevisionID == 0) { break; } @@ -349,7 +349,7 @@ int32_t EepromWriteByte(struct et131x_adapter *pAdapter, uint32_t unAddress, /** * EepromReadByte - Read a byte from the ET1310's EEPROM - * @pAdapter: pointer to our private adapter structure + * @etdev: pointer to our private adapter structure * @unAddress: the address from which to read * @pbData: a pointer to a byte in which to store the value of the read * @unEepronId: the ID of the EEPROM @@ -357,11 +357,11 @@ int32_t EepromWriteByte(struct et131x_adapter *pAdapter, uint32_t unAddress, * * Returns SUCCESS or FAILURE */ -int32_t EepromReadByte(struct et131x_adapter *pAdapter, uint32_t unAddress, +int32_t EepromReadByte(struct et131x_adapter *etdev, uint32_t unAddress, uint8_t *pbData, uint32_t unEepromId, uint32_t unAddressingMode) { - struct pci_dev *pdev = pAdapter->pdev; + struct pci_dev *pdev = etdev->pdev; int32_t nIndex; int32_t nError = 0; uint8_t bControl; diff --git a/drivers/staging/et131x/et1310_jagcore.c b/drivers/staging/et131x/et1310_jagcore.c index 6fb2c6d..3b4b273 100644 --- a/drivers/staging/et131x/et1310_jagcore.c +++ b/drivers/staging/et131x/et1310_jagcore.c @@ -99,27 +99,27 @@ extern dbg_info_t *et131x_dbginfo; * ConfigGlobalRegs - Used to configure the global registers on the JAGCore * @pAdpater: pointer to our adapter structure */ -void ConfigGlobalRegs(struct et131x_adapter *pAdapter) +void ConfigGlobalRegs(struct et131x_adapter *etdev) { - struct _GLOBAL_t __iomem *pGbl = &pAdapter->CSRAddress->global; + struct _GLOBAL_t __iomem *pGbl = &etdev->CSRAddress->global; DBG_ENTER(et131x_dbginfo); - if (pAdapter->RegistryPhyLoopbk == false) { - if (pAdapter->RegistryJumboPacket < 2048) { + if (etdev->RegistryPhyLoopbk == false) { + if (etdev->RegistryJumboPacket < 2048) { /* Tx / RxDMA and Tx/Rx MAC interfaces have a 1k word * block of RAM that the driver can split between Tx * and Rx as it desires. Our default is to split it * 50/50: */ writel(0, &pGbl->rxq_start_addr.value); - writel(pAdapter->RegistryRxMemEnd, + writel(etdev->RegistryRxMemEnd, &pGbl->rxq_end_addr.value); - writel(pAdapter->RegistryRxMemEnd + 1, + writel(etdev->RegistryRxMemEnd + 1, &pGbl->txq_start_addr.value); writel(INTERNAL_MEM_SIZE - 1, &pGbl->txq_end_addr.value); - } else if (pAdapter->RegistryJumboPacket < 8192) { + } else if (etdev->RegistryJumboPacket < 8192) { /* For jumbo packets > 2k but < 8k, split 50-50. */ writel(0, &pGbl->rxq_start_addr.value); writel(INTERNAL_MEM_RX_OFFSET, @@ -171,9 +171,9 @@ void ConfigGlobalRegs(struct et131x_adapter *pAdapter) /** * ConfigMMCRegs - Used to configure the main memory registers in the JAGCore - * @pAdapter: pointer to our adapter structure + * @etdev: pointer to our adapter structure */ -void ConfigMMCRegs(struct et131x_adapter *pAdapter) +void ConfigMMCRegs(struct et131x_adapter *etdev) { MMC_CTRL_t mmc_ctrl = { 0 }; @@ -188,7 +188,7 @@ void ConfigMMCRegs(struct et131x_adapter *pAdapter) mmc_ctrl.bits.arb_disable = 0x0; mmc_ctrl.bits.mmc_enable = 0x1; - writel(mmc_ctrl.value, &pAdapter->CSRAddress->mmc.mmc_ctrl.value); + writel(mmc_ctrl.value, &etdev->CSRAddress->mmc.mmc_ctrl.value); DBG_LEAVE(et131x_dbginfo); } diff --git a/drivers/staging/et131x/et1310_mac.c b/drivers/staging/et131x/et1310_mac.c index 5200dbf..4cb4cfc 100644 --- a/drivers/staging/et131x/et1310_mac.c +++ b/drivers/staging/et131x/et1310_mac.c @@ -101,9 +101,9 @@ extern dbg_info_t *et131x_dbginfo; * ConfigMacRegs1 - Initialize the first part of MAC regs * @pAdpater: pointer to our adapter structure */ -void ConfigMACRegs1(struct et131x_adapter *pAdapter) +void ConfigMACRegs1(struct et131x_adapter *etdev) { - struct _MAC_t __iomem *pMac = &pAdapter->CSRAddress->mac; + struct _MAC_t __iomem *pMac = &etdev->CSRAddress->mac; MAC_STATION_ADDR1_t station1; MAC_STATION_ADDR2_t station2; MAC_IPG_t ipg; @@ -151,12 +151,12 @@ void ConfigMACRegs1(struct et131x_adapter *pAdapter) * station address is used for generating and checking pause control * packets. */ - station2.bits.Octet1 = pAdapter->CurrentAddress[0]; - station2.bits.Octet2 = pAdapter->CurrentAddress[1]; - station1.bits.Octet3 = pAdapter->CurrentAddress[2]; - station1.bits.Octet4 = pAdapter->CurrentAddress[3]; - station1.bits.Octet5 = pAdapter->CurrentAddress[4]; - station1.bits.Octet6 = pAdapter->CurrentAddress[5]; + station2.bits.Octet1 = etdev->CurrentAddress[0]; + station2.bits.Octet2 = etdev->CurrentAddress[1]; + station1.bits.Octet3 = etdev->CurrentAddress[2]; + station1.bits.Octet4 = etdev->CurrentAddress[3]; + station1.bits.Octet5 = etdev->CurrentAddress[4]; + station1.bits.Octet6 = etdev->CurrentAddress[5]; writel(station1.value, &pMac->station_addr_1.value); writel(station2.value, &pMac->station_addr_2.value); @@ -167,7 +167,7 @@ void ConfigMACRegs1(struct et131x_adapter *pAdapter) * Packets larger than (RegistryJumboPacket) that do not contain a * VLAN ID will be dropped by the Rx function. */ - writel(pAdapter->RegistryJumboPacket + 4, &pMac->max_fm_len.value); + writel(etdev->RegistryJumboPacket + 4, &pMac->max_fm_len.value); /* clear out MAC config reset */ writel(0, &pMac->cfg1.value); @@ -179,10 +179,10 @@ void ConfigMACRegs1(struct et131x_adapter *pAdapter) * ConfigMacRegs2 - Initialize the second part of MAC regs * @pAdpater: pointer to our adapter structure */ -void ConfigMACRegs2(struct et131x_adapter *pAdapter) +void ConfigMACRegs2(struct et131x_adapter *etdev) { int32_t delay = 0; - struct _MAC_t __iomem *pMac = &pAdapter->CSRAddress->mac; + struct _MAC_t __iomem *pMac = &etdev->CSRAddress->mac; MAC_CFG1_t cfg1; MAC_CFG2_t cfg2; MAC_IF_CTRL_t ifctrl; @@ -190,12 +190,12 @@ void ConfigMACRegs2(struct et131x_adapter *pAdapter) DBG_ENTER(et131x_dbginfo); - ctl.value = readl(&pAdapter->CSRAddress->txmac.ctl.value); + ctl.value = readl(&etdev->CSRAddress->txmac.ctl.value); cfg1.value = readl(&pMac->cfg1.value); cfg2.value = readl(&pMac->cfg2.value); ifctrl.value = readl(&pMac->if_ctrl.value); - if (pAdapter->uiLinkSpeed == TRUEPHY_SPEED_1000MBPS) { + if (etdev->uiLinkSpeed == TRUEPHY_SPEED_1000MBPS) { cfg2.bits.if_mode = 0x2; ifctrl.bits.phy_mode = 0x0; } else { @@ -210,8 +210,8 @@ void ConfigMACRegs2(struct et131x_adapter *pAdapter) /* Set up flow control */ cfg1.bits.tx_flow = 0x1; - if ((pAdapter->FlowControl == RxOnly) || - (pAdapter->FlowControl == Both)) { + if ((etdev->FlowControl == RxOnly) || + (etdev->FlowControl == Both)) { cfg1.bits.rx_flow = 0x1; } else { cfg1.bits.rx_flow = 0x0; @@ -232,7 +232,7 @@ void ConfigMACRegs2(struct et131x_adapter *pAdapter) */ cfg2.bits.len_check = 0x1; - if (pAdapter->RegistryPhyLoopbk == false) { + if (etdev->RegistryPhyLoopbk == false) { cfg2.bits.pad_crc = 0x1; cfg2.bits.crc_enable = 0x1; } else { @@ -241,8 +241,8 @@ void ConfigMACRegs2(struct et131x_adapter *pAdapter) } /* 1 - full duplex, 0 - half-duplex */ - cfg2.bits.full_duplex = pAdapter->uiDuplexMode; - ifctrl.bits.ghd_mode = !pAdapter->uiDuplexMode; + cfg2.bits.full_duplex = etdev->uiDuplexMode; + ifctrl.bits.ghd_mode = !etdev->uiDuplexMode; writel(ifctrl.value, &pMac->if_ctrl.value); writel(cfg2.value, &pMac->cfg2.value); @@ -262,19 +262,19 @@ void ConfigMACRegs2(struct et131x_adapter *pAdapter) DBG_TRACE(et131x_dbginfo, "Speed %d, Dup %d, CFG1 0x%08x, CFG2 0x%08x, if_ctrl 0x%08x\n", - pAdapter->uiLinkSpeed, pAdapter->uiDuplexMode, + etdev->uiLinkSpeed, etdev->uiDuplexMode, readl(&pMac->cfg1.value), readl(&pMac->cfg2.value), readl(&pMac->if_ctrl.value)); /* Enable TXMAC */ ctl.bits.txmac_en = 0x1; ctl.bits.fc_disable = 0x1; - writel(ctl.value, &pAdapter->CSRAddress->txmac.ctl.value); + writel(ctl.value, &etdev->CSRAddress->txmac.ctl.value); /* Ready to start the RXDMA/TXDMA engine */ - if (!MP_TEST_FLAG(pAdapter, fMP_ADAPTER_LOWER_POWER)) { - et131x_rx_dma_enable(pAdapter); - et131x_tx_dma_enable(pAdapter); + if (!MP_TEST_FLAG(etdev, fMP_ADAPTER_LOWER_POWER)) { + et131x_rx_dma_enable(etdev); + et131x_tx_dma_enable(etdev); } else { DBG_WARNING(et131x_dbginfo, "Didn't enable Rx/Tx due to low-power mode\n"); @@ -283,9 +283,9 @@ void ConfigMACRegs2(struct et131x_adapter *pAdapter) DBG_LEAVE(et131x_dbginfo); } -void ConfigRxMacRegs(struct et131x_adapter *pAdapter) +void ConfigRxMacRegs(struct et131x_adapter *etdev) { - struct _RXMAC_t __iomem *pRxMac = &pAdapter->CSRAddress->rxmac; + struct _RXMAC_t __iomem *pRxMac = &etdev->CSRAddress->rxmac; RXMAC_WOL_SA_LO_t sa_lo; RXMAC_WOL_SA_HI_t sa_hi; RXMAC_PF_CTRL_t pf_ctrl = { 0 }; @@ -330,22 +330,22 @@ void ConfigRxMacRegs(struct et131x_adapter *pAdapter) writel(0, &pRxMac->mask4_word3); /* Lets setup the WOL Source Address */ - sa_lo.bits.sa3 = pAdapter->CurrentAddress[2]; - sa_lo.bits.sa4 = pAdapter->CurrentAddress[3]; - sa_lo.bits.sa5 = pAdapter->CurrentAddress[4]; - sa_lo.bits.sa6 = pAdapter->CurrentAddress[5]; + sa_lo.bits.sa3 = etdev->CurrentAddress[2]; + sa_lo.bits.sa4 = etdev->CurrentAddress[3]; + sa_lo.bits.sa5 = etdev->CurrentAddress[4]; + sa_lo.bits.sa6 = etdev->CurrentAddress[5]; writel(sa_lo.value, &pRxMac->sa_lo.value); - sa_hi.bits.sa1 = pAdapter->CurrentAddress[0]; - sa_hi.bits.sa2 = pAdapter->CurrentAddress[1]; + sa_hi.bits.sa1 = etdev->CurrentAddress[0]; + sa_hi.bits.sa2 = etdev->CurrentAddress[1]; writel(sa_hi.value, &pRxMac->sa_hi.value); /* Disable all Packet Filtering */ writel(0, &pRxMac->pf_ctrl.value); /* Let's initialize the Unicast Packet filtering address */ - if (pAdapter->PacketFilter & ET131X_PACKET_TYPE_DIRECTED) { - SetupDeviceForUnicast(pAdapter); + if (etdev->PacketFilter & ET131X_PACKET_TYPE_DIRECTED) { + SetupDeviceForUnicast(etdev); pf_ctrl.bits.filter_uni_en = 1; } else { writel(0, &pRxMac->uni_pf_addr1.value); @@ -354,18 +354,18 @@ void ConfigRxMacRegs(struct et131x_adapter *pAdapter) } /* Let's initialize the Multicast hash */ - if (pAdapter->PacketFilter & ET131X_PACKET_TYPE_ALL_MULTICAST) { + if (etdev->PacketFilter & ET131X_PACKET_TYPE_ALL_MULTICAST) { pf_ctrl.bits.filter_multi_en = 0; } else { pf_ctrl.bits.filter_multi_en = 1; - SetupDeviceForMulticast(pAdapter); + SetupDeviceForMulticast(etdev); } /* Runt packet filtering. Didn't work in version A silicon. */ pf_ctrl.bits.min_pkt_size = NIC_MIN_PACKET_SIZE + 4; pf_ctrl.bits.filter_frag_en = 1; - if (pAdapter->RegistryJumboPacket > 8192) { + if (etdev->RegistryJumboPacket > 8192) { RXMAC_MCIF_CTRL_MAX_SEG_t mcif_ctrl_max_seg; /* In order to transmit jumbo packets greater than 8k, the @@ -408,7 +408,7 @@ void ConfigRxMacRegs(struct et131x_adapter *pAdapter) * bit 16: Receive frame truncated. * bit 17: Drop packet enable */ - if (pAdapter->uiLinkSpeed == TRUEPHY_SPEED_100MBPS) + if (etdev->uiLinkSpeed == TRUEPHY_SPEED_100MBPS) writel(0x30038, &pRxMac->mif_ctrl.value); else writel(0x30030, &pRxMac->mif_ctrl.value); @@ -425,9 +425,9 @@ void ConfigRxMacRegs(struct et131x_adapter *pAdapter) DBG_LEAVE(et131x_dbginfo); } -void ConfigTxMacRegs(struct et131x_adapter *pAdapter) +void ConfigTxMacRegs(struct et131x_adapter *etdev) { - struct _TXMAC_t __iomem *pTxMac = &pAdapter->CSRAddress->txmac; + struct _TXMAC_t __iomem *pTxMac = &etdev->CSRAddress->txmac; TXMAC_CF_PARAM_t Local; DBG_ENTER(et131x_dbginfo); @@ -436,7 +436,7 @@ void ConfigTxMacRegs(struct et131x_adapter *pAdapter) * cfpt - control frame pause timer set to 64 (0x40) * cfep - control frame extended pause timer set to 0x0 */ - if (pAdapter->FlowControl == None) { + if (etdev->FlowControl == None) { writel(0, &pTxMac->cf_param.value); } else { Local.bits.cfpt = 0x40; @@ -447,10 +447,10 @@ void ConfigTxMacRegs(struct et131x_adapter *pAdapter) DBG_LEAVE(et131x_dbginfo); } -void ConfigMacStatRegs(struct et131x_adapter *pAdapter) +void ConfigMacStatRegs(struct et131x_adapter *etdev) { struct _MAC_STAT_t __iomem *pDevMacStat = - &pAdapter->CSRAddress->macStat; + &etdev->CSRAddress->macStat; DBG_ENTER(et131x_dbginfo); @@ -538,50 +538,50 @@ void ConfigMacStatRegs(struct et131x_adapter *pAdapter) DBG_LEAVE(et131x_dbginfo); } -void ConfigFlowControl(struct et131x_adapter *pAdapter) +void ConfigFlowControl(struct et131x_adapter *etdev) { - if (pAdapter->uiDuplexMode == 0) { - pAdapter->FlowControl = None; + if (etdev->uiDuplexMode == 0) { + etdev->FlowControl = None; } else { char RemotePause, RemoteAsyncPause; - ET1310_PhyAccessMiBit(pAdapter, + ET1310_PhyAccessMiBit(etdev, TRUEPHY_BIT_READ, 5, 10, &RemotePause); - ET1310_PhyAccessMiBit(pAdapter, + ET1310_PhyAccessMiBit(etdev, TRUEPHY_BIT_READ, 5, 11, &RemoteAsyncPause); if ((RemotePause == TRUEPHY_BIT_SET) && (RemoteAsyncPause == TRUEPHY_BIT_SET)) { - pAdapter->FlowControl = pAdapter->RegistryFlowControl; + etdev->FlowControl = etdev->RegistryFlowControl; } else if ((RemotePause == TRUEPHY_BIT_SET) && (RemoteAsyncPause == TRUEPHY_BIT_CLEAR)) { - if (pAdapter->RegistryFlowControl == Both) - pAdapter->FlowControl = Both; + if (etdev->RegistryFlowControl == Both) + etdev->FlowControl = Both; else - pAdapter->FlowControl = None; + etdev->FlowControl = None; } else if ((RemotePause == TRUEPHY_BIT_CLEAR) && (RemoteAsyncPause == TRUEPHY_BIT_CLEAR)) { - pAdapter->FlowControl = None; + etdev->FlowControl = None; } else {/* if (RemotePause == TRUEPHY_CLEAR_BIT && RemoteAsyncPause == TRUEPHY_SET_BIT) */ - if (pAdapter->RegistryFlowControl == Both) - pAdapter->FlowControl = RxOnly; + if (etdev->RegistryFlowControl == Both) + etdev->FlowControl = RxOnly; else - pAdapter->FlowControl = None; + etdev->FlowControl = None; } } } /** * UpdateMacStatHostCounters - Update the local copy of the statistics - * @pAdapter: pointer to the adapter structure + * @etdev: pointer to the adapter structure */ -void UpdateMacStatHostCounters(struct et131x_adapter *pAdapter) +void UpdateMacStatHostCounters(struct et131x_adapter *etdev) { - struct _ce_stats_t *stats = &pAdapter->Stats; + struct _ce_stats_t *stats = &etdev->Stats; struct _MAC_STAT_t __iomem *pDevMacStat = - &pAdapter->CSRAddress->macStat; + &etdev->CSRAddress->macStat; stats->collisions += readl(&pDevMacStat->TNcl); stats->first_collision += readl(&pDevMacStat->TScl); @@ -603,13 +603,13 @@ void UpdateMacStatHostCounters(struct et131x_adapter *pAdapter) /** * HandleMacStatInterrupt - * @pAdapter: pointer to the adapter structure + * @etdev: pointer to the adapter structure * * One of the MACSTAT counters has wrapped. Update the local copy of * the statistics held in the adapter structure, checking the "wrap" * bit for each counter. */ -void HandleMacStatInterrupt(struct et131x_adapter *pAdapter) +void HandleMacStatInterrupt(struct et131x_adapter *etdev) { MAC_STAT_REG_1_t Carry1; MAC_STAT_REG_2_t Carry2; @@ -619,11 +619,11 @@ void HandleMacStatInterrupt(struct et131x_adapter *pAdapter) /* Read the interrupt bits from the register(s). These are Clear On * Write. */ - Carry1.value = readl(&pAdapter->CSRAddress->macStat.Carry1.value); - Carry2.value = readl(&pAdapter->CSRAddress->macStat.Carry2.value); + Carry1.value = readl(&etdev->CSRAddress->macStat.Carry1.value); + Carry2.value = readl(&etdev->CSRAddress->macStat.Carry2.value); - writel(Carry1.value, &pAdapter->CSRAddress->macStat.Carry1.value); - writel(Carry2.value, &pAdapter->CSRAddress->macStat.Carry2.value); + writel(Carry1.value, &etdev->CSRAddress->macStat.Carry1.value); + writel(Carry2.value, &etdev->CSRAddress->macStat.Carry2.value); /* We need to do update the host copy of all the MAC_STAT counters. * For each counter, check it's overflow bit. If the overflow bit is @@ -632,40 +632,40 @@ void HandleMacStatInterrupt(struct et131x_adapter *pAdapter) * block indicates that one of the counters has wrapped. */ if (Carry1.bits.rfcs) - pAdapter->Stats.code_violations += COUNTER_WRAP_16_BIT; + etdev->Stats.code_violations += COUNTER_WRAP_16_BIT; if (Carry1.bits.raln) - pAdapter->Stats.alignment_err += COUNTER_WRAP_12_BIT; + etdev->Stats.alignment_err += COUNTER_WRAP_12_BIT; if (Carry1.bits.rflr) - pAdapter->Stats.length_err += COUNTER_WRAP_16_BIT; + etdev->Stats.length_err += COUNTER_WRAP_16_BIT; if (Carry1.bits.rfrg) - pAdapter->Stats.other_errors += COUNTER_WRAP_16_BIT; + etdev->Stats.other_errors += COUNTER_WRAP_16_BIT; if (Carry1.bits.rcde) - pAdapter->Stats.crc_err += COUNTER_WRAP_16_BIT; + etdev->Stats.crc_err += COUNTER_WRAP_16_BIT; if (Carry1.bits.rovr) - pAdapter->Stats.rx_ov_flow += COUNTER_WRAP_16_BIT; + etdev->Stats.rx_ov_flow += COUNTER_WRAP_16_BIT; if (Carry1.bits.rdrp) - pAdapter->Stats.norcvbuf += COUNTER_WRAP_16_BIT; + etdev->Stats.norcvbuf += COUNTER_WRAP_16_BIT; if (Carry2.bits.tovr) - pAdapter->Stats.max_pkt_error += COUNTER_WRAP_12_BIT; + etdev->Stats.max_pkt_error += COUNTER_WRAP_12_BIT; if (Carry2.bits.tund) - pAdapter->Stats.tx_uflo += COUNTER_WRAP_12_BIT; + etdev->Stats.tx_uflo += COUNTER_WRAP_12_BIT; if (Carry2.bits.tscl) - pAdapter->Stats.first_collision += COUNTER_WRAP_12_BIT; + etdev->Stats.first_collision += COUNTER_WRAP_12_BIT; if (Carry2.bits.tdfr) - pAdapter->Stats.tx_deferred += COUNTER_WRAP_12_BIT; + etdev->Stats.tx_deferred += COUNTER_WRAP_12_BIT; if (Carry2.bits.tmcl) - pAdapter->Stats.excessive_collisions += COUNTER_WRAP_12_BIT; + etdev->Stats.excessive_collisions += COUNTER_WRAP_12_BIT; if (Carry2.bits.tlcl) - pAdapter->Stats.late_collisions += COUNTER_WRAP_12_BIT; + etdev->Stats.late_collisions += COUNTER_WRAP_12_BIT; if (Carry2.bits.tncl) - pAdapter->Stats.collisions += COUNTER_WRAP_12_BIT; + etdev->Stats.collisions += COUNTER_WRAP_12_BIT; DBG_LEAVE(et131x_dbginfo); } -void SetupDeviceForMulticast(struct et131x_adapter *pAdapter) +void SetupDeviceForMulticast(struct et131x_adapter *etdev) { - struct _RXMAC_t __iomem *rxmac = &pAdapter->CSRAddress->rxmac; + struct _RXMAC_t __iomem *rxmac = &etdev->CSRAddress->rxmac; uint32_t nIndex; uint32_t result; uint32_t hash1 = 0; @@ -681,24 +681,24 @@ void SetupDeviceForMulticast(struct et131x_adapter *pAdapter) * specified) then we should pass NO multi-cast addresses to the * driver. */ - if (pAdapter->PacketFilter & ET131X_PACKET_TYPE_MULTICAST) { + if (etdev->PacketFilter & ET131X_PACKET_TYPE_MULTICAST) { DBG_VERBOSE(et131x_dbginfo, "MULTICAST flag is set, MCCount: %d\n", - pAdapter->MCAddressCount); + etdev->MCAddressCount); /* Loop through our multicast array and set up the device */ - for (nIndex = 0; nIndex < pAdapter->MCAddressCount; nIndex++) { + for (nIndex = 0; nIndex < etdev->MCAddressCount; nIndex++) { DBG_VERBOSE(et131x_dbginfo, "MCList[%d]: %02x:%02x:%02x:%02x:%02x:%02x\n", nIndex, - pAdapter->MCList[nIndex][0], - pAdapter->MCList[nIndex][1], - pAdapter->MCList[nIndex][2], - pAdapter->MCList[nIndex][3], - pAdapter->MCList[nIndex][4], - pAdapter->MCList[nIndex][5]); + etdev->MCList[nIndex][0], + etdev->MCList[nIndex][1], + etdev->MCList[nIndex][2], + etdev->MCList[nIndex][3], + etdev->MCList[nIndex][4], + etdev->MCList[nIndex][5]); - result = ether_crc(6, pAdapter->MCList[nIndex]); + result = ether_crc(6, etdev->MCList[nIndex]); result = (result & 0x3F800000) >> 23; @@ -718,7 +718,7 @@ void SetupDeviceForMulticast(struct et131x_adapter *pAdapter) } /* Write out the new hash to the device */ - pm_csr.value = readl(&pAdapter->CSRAddress->global.pm_csr.value); + pm_csr.value = readl(&etdev->CSRAddress->global.pm_csr.value); if (pm_csr.bits.pm_phy_sw_coma == 0) { writel(hash1, &rxmac->multi_hash1); writel(hash2, &rxmac->multi_hash2); @@ -729,9 +729,9 @@ void SetupDeviceForMulticast(struct et131x_adapter *pAdapter) DBG_LEAVE(et131x_dbginfo); } -void SetupDeviceForUnicast(struct et131x_adapter *pAdapter) +void SetupDeviceForUnicast(struct et131x_adapter *etdev) { - struct _RXMAC_t __iomem *rxmac = &pAdapter->CSRAddress->rxmac; + struct _RXMAC_t __iomem *rxmac = &etdev->CSRAddress->rxmac; RXMAC_UNI_PF_ADDR1_t uni_pf1; RXMAC_UNI_PF_ADDR2_t uni_pf2; RXMAC_UNI_PF_ADDR3_t uni_pf3; @@ -748,22 +748,22 @@ void SetupDeviceForUnicast(struct et131x_adapter *pAdapter) * Set up unicast packet filter reg 3 to be the octets 2 - 5 of the * MAC address for first address */ - uni_pf3.bits.addr1_1 = pAdapter->CurrentAddress[0]; - uni_pf3.bits.addr1_2 = pAdapter->CurrentAddress[1]; - uni_pf3.bits.addr2_1 = pAdapter->CurrentAddress[0]; - uni_pf3.bits.addr2_2 = pAdapter->CurrentAddress[1]; - - uni_pf2.bits.addr2_3 = pAdapter->CurrentAddress[2]; - uni_pf2.bits.addr2_4 = pAdapter->CurrentAddress[3]; - uni_pf2.bits.addr2_5 = pAdapter->CurrentAddress[4]; - uni_pf2.bits.addr2_6 = pAdapter->CurrentAddress[5]; - - uni_pf1.bits.addr1_3 = pAdapter->CurrentAddress[2]; - uni_pf1.bits.addr1_4 = pAdapter->CurrentAddress[3]; - uni_pf1.bits.addr1_5 = pAdapter->CurrentAddress[4]; - uni_pf1.bits.addr1_6 = pAdapter->CurrentAddress[5]; - - pm_csr.value = readl(&pAdapter->CSRAddress->global.pm_csr.value); + uni_pf3.bits.addr1_1 = etdev->CurrentAddress[0]; + uni_pf3.bits.addr1_2 = etdev->CurrentAddress[1]; + uni_pf3.bits.addr2_1 = etdev->CurrentAddress[0]; + uni_pf3.bits.addr2_2 = etdev->CurrentAddress[1]; + + uni_pf2.bits.addr2_3 = etdev->CurrentAddress[2]; + uni_pf2.bits.addr2_4 = etdev->CurrentAddress[3]; + uni_pf2.bits.addr2_5 = etdev->CurrentAddress[4]; + uni_pf2.bits.addr2_6 = etdev->CurrentAddress[5]; + + uni_pf1.bits.addr1_3 = etdev->CurrentAddress[2]; + uni_pf1.bits.addr1_4 = etdev->CurrentAddress[3]; + uni_pf1.bits.addr1_5 = etdev->CurrentAddress[4]; + uni_pf1.bits.addr1_6 = etdev->CurrentAddress[5]; + + pm_csr.value = readl(&etdev->CSRAddress->global.pm_csr.value); if (pm_csr.bits.pm_phy_sw_coma == 0) { writel(uni_pf1.value, &rxmac->uni_pf_addr1.value); writel(uni_pf2.value, &rxmac->uni_pf_addr2.value); diff --git a/drivers/staging/et131x/et1310_phy.c b/drivers/staging/et131x/et1310_phy.c index 326d389..82fcb66 100644 --- a/drivers/staging/et131x/et1310_phy.c +++ b/drivers/staging/et131x/et1310_phy.c @@ -474,7 +474,7 @@ static int et131x_xcvr_init(struct et131x_adapter *adapter) } } -void et131x_Mii_check(struct et131x_adapter *pAdapter, +void et131x_Mii_check(struct et131x_adapter *etdev, MI_BMSR_t bmsr, MI_BMSR_t bmsr_ints) { uint8_t ucLinkStatus; @@ -490,37 +490,37 @@ void et131x_Mii_check(struct et131x_adapter *pAdapter, if (bmsr_ints.bits.link_status) { if (bmsr.bits.link_status) { - pAdapter->PoMgmt.TransPhyComaModeOnBoot = 20; + etdev->PoMgmt.TransPhyComaModeOnBoot = 20; /* Update our state variables and indicate the * connected state */ - spin_lock_irqsave(&pAdapter->Lock, lockflags); + spin_lock_irqsave(&etdev->Lock, lockflags); - pAdapter->MediaState = NETIF_STATUS_MEDIA_CONNECT; - MP_CLEAR_FLAG(pAdapter, fMP_ADAPTER_LINK_DETECTION); + etdev->MediaState = NETIF_STATUS_MEDIA_CONNECT; + MP_CLEAR_FLAG(etdev, fMP_ADAPTER_LINK_DETECTION); - spin_unlock_irqrestore(&pAdapter->Lock, lockflags); + spin_unlock_irqrestore(&etdev->Lock, lockflags); /* Don't indicate state if we're in loopback mode */ - if (pAdapter->RegistryPhyLoopbk == false) - netif_carrier_on(pAdapter->netdev); + if (etdev->RegistryPhyLoopbk == false) + netif_carrier_on(etdev->netdev); } else { DBG_WARNING(et131x_dbginfo, "Link down cable problem\n"); - if (pAdapter->uiLinkSpeed == TRUEPHY_SPEED_10MBPS) { + if (etdev->uiLinkSpeed == TRUEPHY_SPEED_10MBPS) { /* NOTE - Is there a way to query this without * TruePHY? - * && TRU_QueryCoreType(pAdapter->hTruePhy, 0) == EMI_TRUEPHY_A13O) { + * && TRU_QueryCoreType(etdev->hTruePhy, 0) == EMI_TRUEPHY_A13O) { */ uint16_t Register18; - MiRead(pAdapter, 0x12, &Register18); - MiWrite(pAdapter, 0x12, Register18 | 0x4); - MiWrite(pAdapter, 0x10, Register18 | 0x8402); - MiWrite(pAdapter, 0x11, Register18 | 511); - MiWrite(pAdapter, 0x12, Register18); + MiRead(etdev, 0x12, &Register18); + MiWrite(etdev, 0x12, Register18 | 0x4); + MiWrite(etdev, 0x10, Register18 | 0x8402); + MiWrite(etdev, 0x11, Register18 | 511); + MiWrite(etdev, 0x12, Register18); } /* For the first N seconds of life, we are in "link @@ -530,33 +530,33 @@ void et131x_Mii_check(struct et131x_adapter *pAdapter, * in the LinkDetectionDPC). */ if ((MP_IS_FLAG_CLEAR - (pAdapter, fMP_ADAPTER_LINK_DETECTION)) - || (pAdapter->MediaState == + (etdev, fMP_ADAPTER_LINK_DETECTION)) + || (etdev->MediaState == NETIF_STATUS_MEDIA_DISCONNECT)) { - spin_lock_irqsave(&pAdapter->Lock, lockflags); - pAdapter->MediaState = + spin_lock_irqsave(&etdev->Lock, lockflags); + etdev->MediaState = NETIF_STATUS_MEDIA_DISCONNECT; - spin_unlock_irqrestore(&pAdapter->Lock, + spin_unlock_irqrestore(&etdev->Lock, lockflags); /* Only indicate state if we're in loopback * mode */ - if (pAdapter->RegistryPhyLoopbk == false) - netif_carrier_off(pAdapter->netdev); + if (etdev->RegistryPhyLoopbk == false) + netif_carrier_off(etdev->netdev); } - pAdapter->uiLinkSpeed = 0; - pAdapter->uiDuplexMode = 0; + etdev->uiLinkSpeed = 0; + etdev->uiDuplexMode = 0; /* Free the packets being actively sent & stopped */ - et131x_free_busy_send_packets(pAdapter); + et131x_free_busy_send_packets(etdev); /* Re-initialize the send structures */ - et131x_init_send(pAdapter); + et131x_init_send(etdev); /* Reset the RFD list and re-start RU */ - et131x_reset_recv(pAdapter); + et131x_reset_recv(etdev); /* * Bring the device back to the state it was during @@ -564,61 +564,61 @@ void et131x_Mii_check(struct et131x_adapter *pAdapter, * way, when we get the auto-neg complete interrupt, * we can complete init by calling ConfigMacREGS2. */ - et131x_soft_reset(pAdapter); + et131x_soft_reset(etdev); /* Setup ET1310 as per the documentation */ - et131x_adapter_setup(pAdapter); + et131x_adapter_setup(etdev); /* Setup the PHY into coma mode until the cable is * plugged back in */ - if (pAdapter->RegistryPhyComa == 1) - EnablePhyComa(pAdapter); + if (etdev->RegistryPhyComa == 1) + EnablePhyComa(etdev); } } if (bmsr_ints.bits.auto_neg_complete || - (pAdapter->AiForceDpx == 3 && bmsr_ints.bits.link_status)) { - if (bmsr.bits.auto_neg_complete || pAdapter->AiForceDpx == 3) { - ET1310_PhyLinkStatus(pAdapter, + (etdev->AiForceDpx == 3 && bmsr_ints.bits.link_status)) { + if (bmsr.bits.auto_neg_complete || etdev->AiForceDpx == 3) { + ET1310_PhyLinkStatus(etdev, &ucLinkStatus, &uiAutoNegStatus, &uiSpeed, &uiDuplex, &uiMdiMdix, &uiMasterSlave, &uiPolarity); - pAdapter->uiLinkSpeed = uiSpeed; - pAdapter->uiDuplexMode = uiDuplex; + etdev->uiLinkSpeed = uiSpeed; + etdev->uiDuplexMode = uiDuplex; DBG_TRACE(et131x_dbginfo, - "pAdapter->uiLinkSpeed 0x%04x, pAdapter->uiDuplex 0x%08x\n", - pAdapter->uiLinkSpeed, - pAdapter->uiDuplexMode); + "etdev->uiLinkSpeed 0x%04x, etdev->uiDuplex 0x%08x\n", + etdev->uiLinkSpeed, + etdev->uiDuplexMode); - pAdapter->PoMgmt.TransPhyComaModeOnBoot = 20; + etdev->PoMgmt.TransPhyComaModeOnBoot = 20; - if (pAdapter->uiLinkSpeed == TRUEPHY_SPEED_10MBPS) { + if (etdev->uiLinkSpeed == TRUEPHY_SPEED_10MBPS) { /* * NOTE - Is there a way to query this without * TruePHY? - * && TRU_QueryCoreType(pAdapter->hTruePhy, 0)== EMI_TRUEPHY_A13O) { + * && TRU_QueryCoreType(etdev->hTruePhy, 0)== EMI_TRUEPHY_A13O) { */ uint16_t Register18; - MiRead(pAdapter, 0x12, &Register18); - MiWrite(pAdapter, 0x12, Register18 | 0x4); - MiWrite(pAdapter, 0x10, Register18 | 0x8402); - MiWrite(pAdapter, 0x11, Register18 | 511); - MiWrite(pAdapter, 0x12, Register18); + MiRead(etdev, 0x12, &Register18); + MiWrite(etdev, 0x12, Register18 | 0x4); + MiWrite(etdev, 0x10, Register18 | 0x8402); + MiWrite(etdev, 0x11, Register18 | 511); + MiWrite(etdev, 0x12, Register18); } - ConfigFlowControl(pAdapter); + ConfigFlowControl(etdev); - if (pAdapter->uiLinkSpeed == TRUEPHY_SPEED_1000MBPS && - pAdapter->RegistryJumboPacket > 2048) - ET1310_PhyAndOrReg(pAdapter, 0x16, 0xcfff, + if (etdev->uiLinkSpeed == TRUEPHY_SPEED_1000MBPS && + etdev->RegistryJumboPacket > 2048) + ET1310_PhyAndOrReg(etdev, 0x16, 0xcfff, 0x2000); - SetRxDmaTimer(pAdapter); - ConfigMACRegs2(pAdapter); + SetRxDmaTimer(etdev); + ConfigMACRegs2(etdev); } } @@ -627,230 +627,230 @@ void et131x_Mii_check(struct et131x_adapter *pAdapter, /** * TPAL_SetPhy10HalfDuplex - Force the phy into 10 Base T Half Duplex mode. - * @pAdapter: pointer to the adapter structure + * @etdev: pointer to the adapter structure * * Also sets the MAC so it is syncd up properly */ -void TPAL_SetPhy10HalfDuplex(struct et131x_adapter *pAdapter) +void TPAL_SetPhy10HalfDuplex(struct et131x_adapter *etdev) { DBG_ENTER(et131x_dbginfo); /* Power down PHY */ - ET1310_PhyPowerDown(pAdapter, 1); + ET1310_PhyPowerDown(etdev, 1); /* First we need to turn off all other advertisement */ - ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); + ET1310_PhyAdvertise1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE); - ET1310_PhyAdvertise100BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); + ET1310_PhyAdvertise100BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE); /* Set our advertise values accordingly */ - ET1310_PhyAdvertise10BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_HALF); + ET1310_PhyAdvertise10BaseT(etdev, TRUEPHY_ADV_DUPLEX_HALF); /* Power up PHY */ - ET1310_PhyPowerDown(pAdapter, 0); + ET1310_PhyPowerDown(etdev, 0); DBG_LEAVE(et131x_dbginfo); } /** * TPAL_SetPhy10FullDuplex - Force the phy into 10 Base T Full Duplex mode. - * @pAdapter: pointer to the adapter structure + * @etdev: pointer to the adapter structure * * Also sets the MAC so it is syncd up properly */ -void TPAL_SetPhy10FullDuplex(struct et131x_adapter *pAdapter) +void TPAL_SetPhy10FullDuplex(struct et131x_adapter *etdev) { DBG_ENTER(et131x_dbginfo); /* Power down PHY */ - ET1310_PhyPowerDown(pAdapter, 1); + ET1310_PhyPowerDown(etdev, 1); /* First we need to turn off all other advertisement */ - ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); + ET1310_PhyAdvertise1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE); - ET1310_PhyAdvertise100BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); + ET1310_PhyAdvertise100BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE); /* Set our advertise values accordingly */ - ET1310_PhyAdvertise10BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_FULL); + ET1310_PhyAdvertise10BaseT(etdev, TRUEPHY_ADV_DUPLEX_FULL); /* Power up PHY */ - ET1310_PhyPowerDown(pAdapter, 0); + ET1310_PhyPowerDown(etdev, 0); DBG_LEAVE(et131x_dbginfo); } /** * TPAL_SetPhy10Force - Force Base-T FD mode WITHOUT using autonegotiation - * @pAdapter: pointer to the adapter structure + * @etdev: pointer to the adapter structure */ -void TPAL_SetPhy10Force(struct et131x_adapter *pAdapter) +void TPAL_SetPhy10Force(struct et131x_adapter *etdev) { DBG_ENTER(et131x_dbginfo); /* Power down PHY */ - ET1310_PhyPowerDown(pAdapter, 1); + ET1310_PhyPowerDown(etdev, 1); /* Disable autoneg */ - ET1310_PhyAutoNeg(pAdapter, false); + ET1310_PhyAutoNeg(etdev, false); /* Disable all advertisement */ - ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); - ET1310_PhyAdvertise10BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); - ET1310_PhyAdvertise100BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); + ET1310_PhyAdvertise1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE); + ET1310_PhyAdvertise10BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE); + ET1310_PhyAdvertise100BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE); /* Force 10 Mbps */ - ET1310_PhySpeedSelect(pAdapter, TRUEPHY_SPEED_10MBPS); + ET1310_PhySpeedSelect(etdev, TRUEPHY_SPEED_10MBPS); /* Force Full duplex */ - ET1310_PhyDuplexMode(pAdapter, TRUEPHY_DUPLEX_FULL); + ET1310_PhyDuplexMode(etdev, TRUEPHY_DUPLEX_FULL); /* Power up PHY */ - ET1310_PhyPowerDown(pAdapter, 0); + ET1310_PhyPowerDown(etdev, 0); DBG_LEAVE(et131x_dbginfo); } /** * TPAL_SetPhy100HalfDuplex - Force 100 Base T Half Duplex mode. - * @pAdapter: pointer to the adapter structure + * @etdev: pointer to the adapter structure * * Also sets the MAC so it is syncd up properly. */ -void TPAL_SetPhy100HalfDuplex(struct et131x_adapter *pAdapter) +void TPAL_SetPhy100HalfDuplex(struct et131x_adapter *etdev) { DBG_ENTER(et131x_dbginfo); /* Power down PHY */ - ET1310_PhyPowerDown(pAdapter, 1); + ET1310_PhyPowerDown(etdev, 1); /* first we need to turn off all other advertisement */ - ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); + ET1310_PhyAdvertise1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE); - ET1310_PhyAdvertise10BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); + ET1310_PhyAdvertise10BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE); /* Set our advertise values accordingly */ - ET1310_PhyAdvertise100BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_HALF); + ET1310_PhyAdvertise100BaseT(etdev, TRUEPHY_ADV_DUPLEX_HALF); /* Set speed */ - ET1310_PhySpeedSelect(pAdapter, TRUEPHY_SPEED_100MBPS); + ET1310_PhySpeedSelect(etdev, TRUEPHY_SPEED_100MBPS); /* Power up PHY */ - ET1310_PhyPowerDown(pAdapter, 0); + ET1310_PhyPowerDown(etdev, 0); DBG_LEAVE(et131x_dbginfo); } /** * TPAL_SetPhy100FullDuplex - Force 100 Base T Full Duplex mode. - * @pAdapter: pointer to the adapter structure + * @etdev: pointer to the adapter structure * * Also sets the MAC so it is syncd up properly */ -void TPAL_SetPhy100FullDuplex(struct et131x_adapter *pAdapter) +void TPAL_SetPhy100FullDuplex(struct et131x_adapter *etdev) { DBG_ENTER(et131x_dbginfo); /* Power down PHY */ - ET1310_PhyPowerDown(pAdapter, 1); + ET1310_PhyPowerDown(etdev, 1); /* First we need to turn off all other advertisement */ - ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); + ET1310_PhyAdvertise1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE); - ET1310_PhyAdvertise10BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); + ET1310_PhyAdvertise10BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE); /* Set our advertise values accordingly */ - ET1310_PhyAdvertise100BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_FULL); + ET1310_PhyAdvertise100BaseT(etdev, TRUEPHY_ADV_DUPLEX_FULL); /* Power up PHY */ - ET1310_PhyPowerDown(pAdapter, 0); + ET1310_PhyPowerDown(etdev, 0); DBG_LEAVE(et131x_dbginfo); } /** * TPAL_SetPhy100Force - Force 100 BaseT FD mode WITHOUT using autonegotiation - * @pAdapter: pointer to the adapter structure + * @etdev: pointer to the adapter structure */ -void TPAL_SetPhy100Force(struct et131x_adapter *pAdapter) +void TPAL_SetPhy100Force(struct et131x_adapter *etdev) { DBG_ENTER(et131x_dbginfo); /* Power down PHY */ - ET1310_PhyPowerDown(pAdapter, 1); + ET1310_PhyPowerDown(etdev, 1); /* Disable autoneg */ - ET1310_PhyAutoNeg(pAdapter, false); + ET1310_PhyAutoNeg(etdev, false); /* Disable all advertisement */ - ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); - ET1310_PhyAdvertise10BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); - ET1310_PhyAdvertise100BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); + ET1310_PhyAdvertise1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE); + ET1310_PhyAdvertise10BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE); + ET1310_PhyAdvertise100BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE); /* Force 100 Mbps */ - ET1310_PhySpeedSelect(pAdapter, TRUEPHY_SPEED_100MBPS); + ET1310_PhySpeedSelect(etdev, TRUEPHY_SPEED_100MBPS); /* Force Full duplex */ - ET1310_PhyDuplexMode(pAdapter, TRUEPHY_DUPLEX_FULL); + ET1310_PhyDuplexMode(etdev, TRUEPHY_DUPLEX_FULL); /* Power up PHY */ - ET1310_PhyPowerDown(pAdapter, 0); + ET1310_PhyPowerDown(etdev, 0); DBG_LEAVE(et131x_dbginfo); } /** * TPAL_SetPhy1000FullDuplex - Force 1000 Base T Full Duplex mode - * @pAdapter: pointer to the adapter structure + * @etdev: pointer to the adapter structure * * Also sets the MAC so it is syncd up properly. */ -void TPAL_SetPhy1000FullDuplex(struct et131x_adapter *pAdapter) +void TPAL_SetPhy1000FullDuplex(struct et131x_adapter *etdev) { DBG_ENTER(et131x_dbginfo); /* Power down PHY */ - ET1310_PhyPowerDown(pAdapter, 1); + ET1310_PhyPowerDown(etdev, 1); /* first we need to turn off all other advertisement */ - ET1310_PhyAdvertise100BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); + ET1310_PhyAdvertise100BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE); - ET1310_PhyAdvertise10BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); + ET1310_PhyAdvertise10BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE); /* set our advertise values accordingly */ - ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_FULL); + ET1310_PhyAdvertise1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_FULL); /* power up PHY */ - ET1310_PhyPowerDown(pAdapter, 0); + ET1310_PhyPowerDown(etdev, 0); DBG_LEAVE(et131x_dbginfo); } /** * TPAL_SetPhyAutoNeg - Set phy to autonegotiation mode. - * @pAdapter: pointer to the adapter structure + * @etdev: pointer to the adapter structure */ -void TPAL_SetPhyAutoNeg(struct et131x_adapter *pAdapter) +void TPAL_SetPhyAutoNeg(struct et131x_adapter *etdev) { DBG_ENTER(et131x_dbginfo); /* Power down PHY */ - ET1310_PhyPowerDown(pAdapter, 1); + ET1310_PhyPowerDown(etdev, 1); /* Turn on advertisement of all capabilities */ - ET1310_PhyAdvertise10BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_BOTH); + ET1310_PhyAdvertise10BaseT(etdev, TRUEPHY_ADV_DUPLEX_BOTH); - ET1310_PhyAdvertise100BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_BOTH); + ET1310_PhyAdvertise100BaseT(etdev, TRUEPHY_ADV_DUPLEX_BOTH); - if (pAdapter->DeviceID != ET131X_PCI_DEVICE_ID_FAST) - ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_FULL); + if (etdev->DeviceID != ET131X_PCI_DEVICE_ID_FAST) + ET1310_PhyAdvertise1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_FULL); else - ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); + ET1310_PhyAdvertise1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE); /* Make sure auto-neg is ON (it is disabled in FORCE modes) */ - ET1310_PhyAutoNeg(pAdapter, true); + ET1310_PhyAutoNeg(etdev, true); /* Power up PHY */ - ET1310_PhyPowerDown(pAdapter, 0); + ET1310_PhyPowerDown(etdev, 0); DBG_LEAVE(et131x_dbginfo); } @@ -903,135 +903,135 @@ static const uint16_t ConfigPhy[25][2] = { }; /* condensed version of the phy initialization routine */ -void ET1310_PhyInit(struct et131x_adapter *pAdapter) +void ET1310_PhyInit(struct et131x_adapter *etdev) { uint16_t usData, usIndex; - if (pAdapter == NULL) + if (etdev == NULL) return; /* get the identity (again ?) */ - MiRead(pAdapter, PHY_ID_1, &usData); - MiRead(pAdapter, PHY_ID_2, &usData); + MiRead(etdev, PHY_ID_1, &usData); + MiRead(etdev, PHY_ID_2, &usData); /* what does this do/achieve ? */ - MiRead(pAdapter, PHY_MPHY_CONTROL_REG, &usData); /* should read 0002 */ - MiWrite(pAdapter, PHY_MPHY_CONTROL_REG, 0x0006); + MiRead(etdev, PHY_MPHY_CONTROL_REG, &usData); /* should read 0002 */ + MiWrite(etdev, PHY_MPHY_CONTROL_REG, 0x0006); /* read modem register 0402, should I do something with the return data ? */ - MiWrite(pAdapter, PHY_INDEX_REG, 0x0402); - MiRead(pAdapter, PHY_DATA_REG, &usData); + MiWrite(etdev, PHY_INDEX_REG, 0x0402); + MiRead(etdev, PHY_DATA_REG, &usData); /* what does this do/achieve ? */ - MiWrite(pAdapter, PHY_MPHY_CONTROL_REG, 0x0002); + MiWrite(etdev, PHY_MPHY_CONTROL_REG, 0x0002); /* get the identity (again ?) */ - MiRead(pAdapter, PHY_ID_1, &usData); - MiRead(pAdapter, PHY_ID_2, &usData); + MiRead(etdev, PHY_ID_1, &usData); + MiRead(etdev, PHY_ID_2, &usData); /* what does this achieve ? */ - MiRead(pAdapter, PHY_MPHY_CONTROL_REG, &usData); /* should read 0002 */ - MiWrite(pAdapter, PHY_MPHY_CONTROL_REG, 0x0006); + MiRead(etdev, PHY_MPHY_CONTROL_REG, &usData); /* should read 0002 */ + MiWrite(etdev, PHY_MPHY_CONTROL_REG, 0x0006); /* read modem register 0402, should I do something with the return data? */ - MiWrite(pAdapter, PHY_INDEX_REG, 0x0402); - MiRead(pAdapter, PHY_DATA_REG, &usData); + MiWrite(etdev, PHY_INDEX_REG, 0x0402); + MiRead(etdev, PHY_DATA_REG, &usData); - MiWrite(pAdapter, PHY_MPHY_CONTROL_REG, 0x0002); + MiWrite(etdev, PHY_MPHY_CONTROL_REG, 0x0002); /* what does this achieve (should return 0x1040) */ - MiRead(pAdapter, PHY_CONTROL, &usData); - MiRead(pAdapter, PHY_MPHY_CONTROL_REG, &usData); /* should read 0002 */ - MiWrite(pAdapter, PHY_CONTROL, 0x1840); + MiRead(etdev, PHY_CONTROL, &usData); + MiRead(etdev, PHY_MPHY_CONTROL_REG, &usData); /* should read 0002 */ + MiWrite(etdev, PHY_CONTROL, 0x1840); - MiWrite(pAdapter, PHY_MPHY_CONTROL_REG, 0x0007); + MiWrite(etdev, PHY_MPHY_CONTROL_REG, 0x0007); /* here the writing of the array starts.... */ usIndex = 0; while (ConfigPhy[usIndex][0] != 0x0000) { /* write value */ - MiWrite(pAdapter, PHY_INDEX_REG, ConfigPhy[usIndex][0]); - MiWrite(pAdapter, PHY_DATA_REG, ConfigPhy[usIndex][1]); + MiWrite(etdev, PHY_INDEX_REG, ConfigPhy[usIndex][0]); + MiWrite(etdev, PHY_DATA_REG, ConfigPhy[usIndex][1]); /* read it back */ - MiWrite(pAdapter, PHY_INDEX_REG, ConfigPhy[usIndex][0]); - MiRead(pAdapter, PHY_DATA_REG, &usData); + MiWrite(etdev, PHY_INDEX_REG, ConfigPhy[usIndex][0]); + MiRead(etdev, PHY_DATA_REG, &usData); /* do a check on the value read back ? */ usIndex++; } /* here the writing of the array ends... */ - MiRead(pAdapter, PHY_CONTROL, &usData); /* 0x1840 */ - MiRead(pAdapter, PHY_MPHY_CONTROL_REG, &usData);/* should read 0007 */ - MiWrite(pAdapter, PHY_CONTROL, 0x1040); - MiWrite(pAdapter, PHY_MPHY_CONTROL_REG, 0x0002); + MiRead(etdev, PHY_CONTROL, &usData); /* 0x1840 */ + MiRead(etdev, PHY_MPHY_CONTROL_REG, &usData);/* should read 0007 */ + MiWrite(etdev, PHY_CONTROL, 0x1040); + MiWrite(etdev, PHY_MPHY_CONTROL_REG, 0x0002); } -void ET1310_PhyReset(struct et131x_adapter *pAdapter) +void ET1310_PhyReset(struct et131x_adapter *etdev) { - MiWrite(pAdapter, PHY_CONTROL, 0x8000); + MiWrite(etdev, PHY_CONTROL, 0x8000); } -void ET1310_PhyPowerDown(struct et131x_adapter *pAdapter, bool down) +void ET1310_PhyPowerDown(struct et131x_adapter *etdev, bool down) { uint16_t usData; - MiRead(pAdapter, PHY_CONTROL, &usData); + MiRead(etdev, PHY_CONTROL, &usData); if (down == false) { /* Power UP */ usData &= ~0x0800; - MiWrite(pAdapter, PHY_CONTROL, usData); + MiWrite(etdev, PHY_CONTROL, usData); } else { /* Power DOWN */ usData |= 0x0800; - MiWrite(pAdapter, PHY_CONTROL, usData); + MiWrite(etdev, PHY_CONTROL, usData); } } -void ET1310_PhyAutoNeg(struct et131x_adapter *pAdapter, bool enable) +void ET1310_PhyAutoNeg(struct et131x_adapter *etdev, bool enable) { uint16_t usData; - MiRead(pAdapter, PHY_CONTROL, &usData); + MiRead(etdev, PHY_CONTROL, &usData); if (enable == true) { /* Autonegotiation ON */ usData |= 0x1000; - MiWrite(pAdapter, PHY_CONTROL, usData); + MiWrite(etdev, PHY_CONTROL, usData); } else { /* Autonegotiation OFF */ usData &= ~0x1000; - MiWrite(pAdapter, PHY_CONTROL, usData); + MiWrite(etdev, PHY_CONTROL, usData); } } -void ET1310_PhyDuplexMode(struct et131x_adapter *pAdapter, uint16_t duplex) +void ET1310_PhyDuplexMode(struct et131x_adapter *etdev, uint16_t duplex) { uint16_t usData; - MiRead(pAdapter, PHY_CONTROL, &usData); + MiRead(etdev, PHY_CONTROL, &usData); if (duplex == TRUEPHY_DUPLEX_FULL) { /* Set Full Duplex */ usData |= 0x100; - MiWrite(pAdapter, PHY_CONTROL, usData); + MiWrite(etdev, PHY_CONTROL, usData); } else { /* Set Half Duplex */ usData &= ~0x100; - MiWrite(pAdapter, PHY_CONTROL, usData); + MiWrite(etdev, PHY_CONTROL, usData); } } -void ET1310_PhySpeedSelect(struct et131x_adapter *pAdapter, uint16_t speed) +void ET1310_PhySpeedSelect(struct et131x_adapter *etdev, uint16_t speed) { uint16_t usData; /* Read the PHY control register */ - MiRead(pAdapter, PHY_CONTROL, &usData); + MiRead(etdev, PHY_CONTROL, &usData); /* Clear all Speed settings (Bits 6, 13) */ usData &= ~0x2040; @@ -1054,16 +1054,16 @@ void ET1310_PhySpeedSelect(struct et131x_adapter *pAdapter, uint16_t speed) } /* Write back the new speed */ - MiWrite(pAdapter, PHY_CONTROL, usData); + MiWrite(etdev, PHY_CONTROL, usData); } -void ET1310_PhyAdvertise1000BaseT(struct et131x_adapter *pAdapter, +void ET1310_PhyAdvertise1000BaseT(struct et131x_adapter *etdev, uint16_t duplex) { uint16_t usData; /* Read the PHY 1000 Base-T Control Register */ - MiRead(pAdapter, PHY_1000_CONTROL, &usData); + MiRead(etdev, PHY_1000_CONTROL, &usData); /* Clear Bits 8,9 */ usData &= ~0x0300; @@ -1090,16 +1090,16 @@ void ET1310_PhyAdvertise1000BaseT(struct et131x_adapter *pAdapter, } /* Write back advertisement */ - MiWrite(pAdapter, PHY_1000_CONTROL, usData); + MiWrite(etdev, PHY_1000_CONTROL, usData); } -void ET1310_PhyAdvertise100BaseT(struct et131x_adapter *pAdapter, +void ET1310_PhyAdvertise100BaseT(struct et131x_adapter *etdev, uint16_t duplex) { uint16_t usData; /* Read the Autonegotiation Register (10/100) */ - MiRead(pAdapter, PHY_AUTO_ADVERTISEMENT, &usData); + MiRead(etdev, PHY_AUTO_ADVERTISEMENT, &usData); /* Clear bits 7,8 */ usData &= ~0x0180; @@ -1127,16 +1127,16 @@ void ET1310_PhyAdvertise100BaseT(struct et131x_adapter *pAdapter, } /* Write back advertisement */ - MiWrite(pAdapter, PHY_AUTO_ADVERTISEMENT, usData); + MiWrite(etdev, PHY_AUTO_ADVERTISEMENT, usData); } -void ET1310_PhyAdvertise10BaseT(struct et131x_adapter *pAdapter, +void ET1310_PhyAdvertise10BaseT(struct et131x_adapter *etdev, uint16_t duplex) { uint16_t usData; /* Read the Autonegotiation Register (10/100) */ - MiRead(pAdapter, PHY_AUTO_ADVERTISEMENT, &usData); + MiRead(etdev, PHY_AUTO_ADVERTISEMENT, &usData); /* Clear bits 5,6 */ usData &= ~0x0060; @@ -1164,10 +1164,10 @@ void ET1310_PhyAdvertise10BaseT(struct et131x_adapter *pAdapter, } /* Write back advertisement */ - MiWrite(pAdapter, PHY_AUTO_ADVERTISEMENT, usData); + MiWrite(etdev, PHY_AUTO_ADVERTISEMENT, usData); } -void ET1310_PhyLinkStatus(struct et131x_adapter *pAdapter, +void ET1310_PhyLinkStatus(struct et131x_adapter *etdev, uint8_t *ucLinkStatus, uint32_t *uiAutoNeg, uint32_t *uiLinkSpeed, @@ -1180,10 +1180,10 @@ void ET1310_PhyLinkStatus(struct et131x_adapter *pAdapter, uint16_t usVmiPhyStatus = 0; uint16_t usControl = 0; - MiRead(pAdapter, PHY_STATUS, &usMiStatus); - MiRead(pAdapter, PHY_1000_STATUS, &us1000BaseT); - MiRead(pAdapter, PHY_PHY_STATUS, &usVmiPhyStatus); - MiRead(pAdapter, PHY_CONTROL, &usControl); + MiRead(etdev, PHY_STATUS, &usMiStatus); + MiRead(etdev, PHY_1000_STATUS, &us1000BaseT); + MiRead(etdev, PHY_PHY_STATUS, &usVmiPhyStatus); + MiRead(etdev, PHY_CONTROL, &usControl); if (ucLinkStatus) { *ucLinkStatus = @@ -1221,13 +1221,13 @@ void ET1310_PhyLinkStatus(struct et131x_adapter *pAdapter, } } -void ET1310_PhyAndOrReg(struct et131x_adapter *pAdapter, +void ET1310_PhyAndOrReg(struct et131x_adapter *etdev, uint16_t regnum, uint16_t andMask, uint16_t orMask) { uint16_t reg; /* Read the requested register */ - MiRead(pAdapter, regnum, ®); + MiRead(etdev, regnum, ®); /* Apply the AND mask */ reg &= andMask; @@ -1236,10 +1236,10 @@ void ET1310_PhyAndOrReg(struct et131x_adapter *pAdapter, reg |= orMask; /* Write the value back to the register */ - MiWrite(pAdapter, regnum, reg); + MiWrite(etdev, regnum, reg); } -void ET1310_PhyAccessMiBit(struct et131x_adapter *pAdapter, uint16_t action, +void ET1310_PhyAccessMiBit(struct et131x_adapter *etdev, uint16_t action, uint16_t regnum, uint16_t bitnum, uint8_t *value) { uint16_t reg; @@ -1249,7 +1249,7 @@ void ET1310_PhyAccessMiBit(struct et131x_adapter *pAdapter, uint16_t action, mask = 0x0001 << bitnum; /* Read the requested register */ - MiRead(pAdapter, regnum, ®); + MiRead(etdev, regnum, ®); switch (action) { case TRUEPHY_BIT_READ: @@ -1259,12 +1259,12 @@ void ET1310_PhyAccessMiBit(struct et131x_adapter *pAdapter, uint16_t action, case TRUEPHY_BIT_SET: reg |= mask; - MiWrite(pAdapter, regnum, reg); + MiWrite(etdev, regnum, reg); break; case TRUEPHY_BIT_CLEAR: reg &= ~mask; - MiWrite(pAdapter, regnum, reg); + MiWrite(etdev, regnum, reg); break; default: diff --git a/drivers/staging/et131x/et1310_pm.c b/drivers/staging/et131x/et1310_pm.c index 5d652ca..864d3ad 100644 --- a/drivers/staging/et131x/et1310_pm.c +++ b/drivers/staging/et131x/et1310_pm.c @@ -99,7 +99,7 @@ extern dbg_info_t *et131x_dbginfo; /** * EnablePhyComa - called when network cable is unplugged - * @pAdapter: pointer to our adapter structure + * @etdev: pointer to our adapter structure * * driver receive an phy status change interrupt while in D0 and check that * phy_status is down. @@ -117,7 +117,7 @@ extern dbg_info_t *et131x_dbginfo; * indicating linkup status, call the MPDisablePhyComa routine to * restore JAGCore and gigE PHY */ -void EnablePhyComa(struct et131x_adapter *pAdapter) +void EnablePhyComa(struct et131x_adapter *etdev) { unsigned long lockflags; PM_CSR_t GlobalPmCSR; @@ -125,81 +125,81 @@ void EnablePhyComa(struct et131x_adapter *pAdapter) DBG_ENTER(et131x_dbginfo); - GlobalPmCSR.value = readl(&pAdapter->CSRAddress->global.pm_csr.value); + GlobalPmCSR.value = readl(&etdev->CSRAddress->global.pm_csr.value); /* Save the GbE PHY speed and duplex modes. Need to restore this * when cable is plugged back in */ - pAdapter->PoMgmt.PowerDownSpeed = pAdapter->AiForceSpeed; - pAdapter->PoMgmt.PowerDownDuplex = pAdapter->AiForceDpx; + etdev->PoMgmt.PowerDownSpeed = etdev->AiForceSpeed; + etdev->PoMgmt.PowerDownDuplex = etdev->AiForceDpx; /* Stop sending packets. */ - spin_lock_irqsave(&pAdapter->SendHWLock, lockflags); - MP_SET_FLAG(pAdapter, fMP_ADAPTER_LOWER_POWER); - spin_unlock_irqrestore(&pAdapter->SendHWLock, lockflags); + spin_lock_irqsave(&etdev->SendHWLock, lockflags); + MP_SET_FLAG(etdev, fMP_ADAPTER_LOWER_POWER); + spin_unlock_irqrestore(&etdev->SendHWLock, lockflags); /* Wait for outstanding Receive packets */ - while ((MP_GET_RCV_REF(pAdapter) != 0) && (LoopCounter-- > 0)) + while ((MP_GET_RCV_REF(etdev) != 0) && (LoopCounter-- > 0)) mdelay(2); /* Gate off JAGCore 3 clock domains */ GlobalPmCSR.bits.pm_sysclk_gate = 0; GlobalPmCSR.bits.pm_txclk_gate = 0; GlobalPmCSR.bits.pm_rxclk_gate = 0; - writel(GlobalPmCSR.value, &pAdapter->CSRAddress->global.pm_csr.value); + writel(GlobalPmCSR.value, &etdev->CSRAddress->global.pm_csr.value); /* Program gigE PHY in to Coma mode */ GlobalPmCSR.bits.pm_phy_sw_coma = 1; - writel(GlobalPmCSR.value, &pAdapter->CSRAddress->global.pm_csr.value); + writel(GlobalPmCSR.value, &etdev->CSRAddress->global.pm_csr.value); DBG_LEAVE(et131x_dbginfo); } /** * DisablePhyComa - Disable the Phy Coma Mode - * @pAdapter: pointer to our adapter structure + * @etdev: pointer to our adapter structure */ -void DisablePhyComa(struct et131x_adapter *pAdapter) +void DisablePhyComa(struct et131x_adapter *etdev) { PM_CSR_t GlobalPmCSR; DBG_ENTER(et131x_dbginfo); - GlobalPmCSR.value = readl(&pAdapter->CSRAddress->global.pm_csr.value); + GlobalPmCSR.value = readl(&etdev->CSRAddress->global.pm_csr.value); /* Disable phy_sw_coma register and re-enable JAGCore clocks */ GlobalPmCSR.bits.pm_sysclk_gate = 1; GlobalPmCSR.bits.pm_txclk_gate = 1; GlobalPmCSR.bits.pm_rxclk_gate = 1; GlobalPmCSR.bits.pm_phy_sw_coma = 0; - writel(GlobalPmCSR.value, &pAdapter->CSRAddress->global.pm_csr.value); + writel(GlobalPmCSR.value, &etdev->CSRAddress->global.pm_csr.value); /* Restore the GbE PHY speed and duplex modes; * Reset JAGCore; re-configure and initialize JAGCore and gigE PHY */ - pAdapter->AiForceSpeed = pAdapter->PoMgmt.PowerDownSpeed; - pAdapter->AiForceDpx = pAdapter->PoMgmt.PowerDownDuplex; + etdev->AiForceSpeed = etdev->PoMgmt.PowerDownSpeed; + etdev->AiForceDpx = etdev->PoMgmt.PowerDownDuplex; /* Re-initialize the send structures */ - et131x_init_send(pAdapter); + et131x_init_send(etdev); /* Reset the RFD list and re-start RU */ - et131x_reset_recv(pAdapter); + et131x_reset_recv(etdev); /* Bring the device back to the state it was during init prior to * autonegotiation being complete. This way, when we get the auto-neg * complete interrupt, we can complete init by calling ConfigMacREGS2. */ - et131x_soft_reset(pAdapter); + et131x_soft_reset(etdev); /* setup et1310 as per the documentation ?? */ - et131x_adapter_setup(pAdapter); + et131x_adapter_setup(etdev); /* Allow Tx to restart */ - MP_CLEAR_FLAG(pAdapter, fMP_ADAPTER_LOWER_POWER); + MP_CLEAR_FLAG(etdev, fMP_ADAPTER_LOWER_POWER); /* Need to re-enable Rx. */ - et131x_rx_dma_enable(pAdapter); + et131x_rx_dma_enable(etdev); DBG_LEAVE(et131x_dbginfo); } diff --git a/drivers/staging/et131x/et1310_rx.c b/drivers/staging/et131x/et1310_rx.c index 9b9e773..f8cc6a6 100644 --- a/drivers/staging/et131x/et1310_rx.c +++ b/drivers/staging/et131x/et1310_rx.c @@ -99,7 +99,7 @@ extern dbg_info_t *et131x_dbginfo; #endif /* CONFIG_ET131X_DEBUG */ -void nic_return_rfd(struct et131x_adapter *pAdapter, PMP_RFD pMpRfd); +void nic_return_rfd(struct et131x_adapter *etdev, PMP_RFD pMpRfd); /** * et131x_rx_dma_memory_alloc @@ -676,12 +676,12 @@ void et131x_rfd_resources_free(struct et131x_adapter *adapter, MP_RFD *pMpRfd) /** * ConfigRxDmaRegs - Start of Rx_DMA init sequence - * @pAdapter: pointer to our adapter structure + * @etdev: pointer to our adapter structure */ -void ConfigRxDmaRegs(struct et131x_adapter *pAdapter) +void ConfigRxDmaRegs(struct et131x_adapter *etdev) { - struct _RXDMA_t __iomem *pRxDma = &pAdapter->CSRAddress->rxdma; - struct _rx_ring_t *pRxLocal = &pAdapter->RxRing; + struct _RXDMA_t __iomem *pRxDma = &etdev->CSRAddress->rxdma; + struct _rx_ring_t *pRxLocal = &etdev->RxRing; PFBR_DESC_t pFbrEntry; uint32_t iEntry; RXDMA_PSR_NUM_DES_t psr_num_des; @@ -690,7 +690,7 @@ void ConfigRxDmaRegs(struct et131x_adapter *pAdapter) DBG_ENTER(et131x_dbginfo); /* Halt RXDMA to perform the reconfigure. */ - et131x_rx_dma_disable(pAdapter); + et131x_rx_dma_disable(etdev); /* Load the completion writeback physical address * @@ -718,7 +718,7 @@ void ConfigRxDmaRegs(struct et131x_adapter *pAdapter) writel((psr_num_des.bits.psr_ndes * LO_MARK_PERCENT_FOR_PSR) / 100, &pRxDma->psr_min_des.value); - spin_lock_irqsave(&pAdapter->RcvLock, lockflags); + spin_lock_irqsave(&etdev->RcvLock, lockflags); /* These local variables track the PSR in the adapter structure */ pRxLocal->local_psr_full.bits.psr_full = 0; @@ -792,52 +792,52 @@ void ConfigRxDmaRegs(struct et131x_adapter *pAdapter) * For version B silicon, this value gets updated once autoneg is *complete. */ - writel(pAdapter->RegistryRxNumBuffers, &pRxDma->num_pkt_done.value); + writel(etdev->RegistryRxNumBuffers, &pRxDma->num_pkt_done.value); /* The "time_done" is not working correctly to coalesce interrupts * after a given time period, but rather is giving us an interrupt * regardless of whether we have received packets. * This value gets updated once autoneg is complete. */ - writel(pAdapter->RegistryRxTimeInterval, &pRxDma->max_pkt_time.value); + writel(etdev->RegistryRxTimeInterval, &pRxDma->max_pkt_time.value); - spin_unlock_irqrestore(&pAdapter->RcvLock, lockflags); + spin_unlock_irqrestore(&etdev->RcvLock, lockflags); DBG_LEAVE(et131x_dbginfo); } /** * SetRxDmaTimer - Set the heartbeat timer according to line rate. - * @pAdapter: pointer to our adapter structure + * @etdev: pointer to our adapter structure */ -void SetRxDmaTimer(struct et131x_adapter *pAdapter) +void SetRxDmaTimer(struct et131x_adapter *etdev) { /* For version B silicon, we do not use the RxDMA timer for 10 and 100 * Mbits/s line rates. We do not enable and RxDMA interrupt coalescing. */ - if ((pAdapter->uiLinkSpeed == TRUEPHY_SPEED_100MBPS) || - (pAdapter->uiLinkSpeed == TRUEPHY_SPEED_10MBPS)) { - writel(0, &pAdapter->CSRAddress->rxdma.max_pkt_time.value); - writel(1, &pAdapter->CSRAddress->rxdma.num_pkt_done.value); + if ((etdev->uiLinkSpeed == TRUEPHY_SPEED_100MBPS) || + (etdev->uiLinkSpeed == TRUEPHY_SPEED_10MBPS)) { + writel(0, &etdev->CSRAddress->rxdma.max_pkt_time.value); + writel(1, &etdev->CSRAddress->rxdma.num_pkt_done.value); } } /** * et131x_rx_dma_disable - Stop of Rx_DMA on the ET1310 - * @pAdapter: pointer to our adapter structure + * @etdev: pointer to our adapter structure */ -void et131x_rx_dma_disable(struct et131x_adapter *pAdapter) +void et131x_rx_dma_disable(struct et131x_adapter *etdev) { RXDMA_CSR_t csr; DBG_ENTER(et131x_dbginfo); /* Setup the receive dma configuration register */ - writel(0x00002001, &pAdapter->CSRAddress->rxdma.csr.value); - csr.value = readl(&pAdapter->CSRAddress->rxdma.csr.value); + writel(0x00002001, &etdev->CSRAddress->rxdma.csr.value); + csr.value = readl(&etdev->CSRAddress->rxdma.csr.value); if (csr.bits.halt_status != 1) { udelay(5); - csr.value = readl(&pAdapter->CSRAddress->rxdma.csr.value); + csr.value = readl(&etdev->CSRAddress->rxdma.csr.value); if (csr.bits.halt_status != 1) DBG_ERROR(et131x_dbginfo, "RX Dma failed to enter halt state. CSR 0x%08x\n", @@ -849,41 +849,41 @@ void et131x_rx_dma_disable(struct et131x_adapter *pAdapter) /** * et131x_rx_dma_enable - re-start of Rx_DMA on the ET1310. - * @pAdapter: pointer to our adapter structure + * @etdev: pointer to our adapter structure */ -void et131x_rx_dma_enable(struct et131x_adapter *pAdapter) +void et131x_rx_dma_enable(struct et131x_adapter *etdev) { DBG_RX_ENTER(et131x_dbginfo); - if (pAdapter->RegistryPhyLoopbk) + if (etdev->RegistryPhyLoopbk) /* RxDMA is disabled for loopback operation. */ - writel(0x1, &pAdapter->CSRAddress->rxdma.csr.value); + writel(0x1, &etdev->CSRAddress->rxdma.csr.value); else { /* Setup the receive dma configuration register for normal operation */ RXDMA_CSR_t csr = { 0 }; csr.bits.fbr1_enable = 1; - if (pAdapter->RxRing.Fbr1BufferSize == 4096) + if (etdev->RxRing.Fbr1BufferSize == 4096) csr.bits.fbr1_size = 1; - else if (pAdapter->RxRing.Fbr1BufferSize == 8192) + else if (etdev->RxRing.Fbr1BufferSize == 8192) csr.bits.fbr1_size = 2; - else if (pAdapter->RxRing.Fbr1BufferSize == 16384) + else if (etdev->RxRing.Fbr1BufferSize == 16384) csr.bits.fbr1_size = 3; #ifdef USE_FBR0 csr.bits.fbr0_enable = 1; - if (pAdapter->RxRing.Fbr0BufferSize == 256) + if (etdev->RxRing.Fbr0BufferSize == 256) csr.bits.fbr0_size = 1; - else if (pAdapter->RxRing.Fbr0BufferSize == 512) + else if (etdev->RxRing.Fbr0BufferSize == 512) csr.bits.fbr0_size = 2; - else if (pAdapter->RxRing.Fbr0BufferSize == 1024) + else if (etdev->RxRing.Fbr0BufferSize == 1024) csr.bits.fbr0_size = 3; #endif - writel(csr.value, &pAdapter->CSRAddress->rxdma.csr.value); + writel(csr.value, &etdev->CSRAddress->rxdma.csr.value); - csr.value = readl(&pAdapter->CSRAddress->rxdma.csr.value); + csr.value = readl(&etdev->CSRAddress->rxdma.csr.value); if (csr.bits.halt_status != 0) { udelay(5); - csr.value = readl(&pAdapter->CSRAddress->rxdma.csr.value); + csr.value = readl(&etdev->CSRAddress->rxdma.csr.value); if (csr.bits.halt_status != 0) { DBG_ERROR(et131x_dbginfo, "RX Dma failed to exit halt state. CSR 0x%08x\n", @@ -897,7 +897,7 @@ void et131x_rx_dma_enable(struct et131x_adapter *pAdapter) /** * nic_rx_pkts - Checks the hardware for available packets - * @pAdapter: pointer to our adapter + * @etdev: pointer to our adapter * * Returns pMpRfd, a pointer to our MPRFD. * @@ -906,9 +906,9 @@ void et131x_rx_dma_enable(struct et131x_adapter *pAdapter) * the packet to it, puts the RFD in the RecvPendList, and also returns * the pointer to the RFD. */ -PMP_RFD nic_rx_pkts(struct et131x_adapter *pAdapter) +PMP_RFD nic_rx_pkts(struct et131x_adapter *etdev) { - struct _rx_ring_t *pRxLocal = &pAdapter->RxRing; + struct _rx_ring_t *pRxLocal = &etdev->RxRing; PRX_STATUS_BLOCK_t pRxStatusBlock; PPKT_STAT_DESC_t pPSREntry; PMP_RFD pMpRfd; @@ -978,7 +978,7 @@ PMP_RFD nic_rx_pkts(struct et131x_adapter *pAdapter) } writel(pRxLocal->local_psr_full.value, - &pAdapter->CSRAddress->rxdma.psr_full_offset.value); + &etdev->CSRAddress->rxdma.psr_full_offset.value); #ifndef USE_FBR0 if (ringIndex != 1) { @@ -1013,7 +1013,7 @@ PMP_RFD nic_rx_pkts(struct et131x_adapter *pAdapter) } /* Get and fill the RFD. */ - spin_lock_irqsave(&pAdapter->RcvLock, lockflags); + spin_lock_irqsave(&etdev->RcvLock, lockflags); pMpRfd = NULL; element = pRxLocal->RecvList.next; @@ -1023,14 +1023,14 @@ PMP_RFD nic_rx_pkts(struct et131x_adapter *pAdapter) DBG_RX(et131x_dbginfo, "NULL RFD returned from RecvList via list_entry()\n"); DBG_RX_LEAVE(et131x_dbginfo); - spin_unlock_irqrestore(&pAdapter->RcvLock, lockflags); + spin_unlock_irqrestore(&etdev->RcvLock, lockflags); return NULL; } list_del(&pMpRfd->list_node); pRxLocal->nReadyRecv--; - spin_unlock_irqrestore(&pAdapter->RcvLock, lockflags); + spin_unlock_irqrestore(&etdev->RcvLock, lockflags); pMpRfd->iBufferIndex = bufferIndex; pMpRfd->iRingIndex = ringIndex; @@ -1041,19 +1041,19 @@ PMP_RFD nic_rx_pkts(struct et131x_adapter *pAdapter) * also counted here. */ if (localLen < (NIC_MIN_PACKET_SIZE + 4)) { - pAdapter->Stats.other_errors++; + etdev->Stats.other_errors++; localLen = 0; } if (localLen) { - if (pAdapter->ReplicaPhyLoopbk == 1) { + if (etdev->ReplicaPhyLoopbk == 1) { pBufVa = pRxLocal->Fbr[ringIndex]->Va[bufferIndex]; - if (memcmp(&pBufVa[6], &pAdapter->CurrentAddress[0], + if (memcmp(&pBufVa[6], &etdev->CurrentAddress[0], ETH_ALEN) == 0) { if (memcmp(&pBufVa[42], "Replica packet", ETH_HLEN)) { - pAdapter->ReplicaPhyLoopbkPF = 1; + etdev->ReplicaPhyLoopbkPF = 1; } } DBG_WARNING(et131x_dbginfo, @@ -1063,12 +1063,12 @@ PMP_RFD nic_rx_pkts(struct et131x_adapter *pAdapter) DBG_WARNING(et131x_dbginfo, "CurrentAddr:\t%02x:%02x:%02x:%02x:%02x:%02x\n", - pAdapter->CurrentAddress[0], - pAdapter->CurrentAddress[1], - pAdapter->CurrentAddress[2], - pAdapter->CurrentAddress[3], - pAdapter->CurrentAddress[4], - pAdapter->CurrentAddress[5]); + etdev->CurrentAddress[0], + etdev->CurrentAddress[1], + etdev->CurrentAddress[2], + etdev->CurrentAddress[3], + etdev->CurrentAddress[4], + etdev->CurrentAddress[5]); } /* Determine if this is a multicast packet coming in */ @@ -1081,9 +1081,9 @@ PMP_RFD nic_rx_pkts(struct et131x_adapter *pAdapter) * filters. Generally filter is 0x2b when in * promiscuous mode. */ - if ((pAdapter->PacketFilter & ET131X_PACKET_TYPE_MULTICAST) - && !(pAdapter->PacketFilter & ET131X_PACKET_TYPE_PROMISCUOUS) - && !(pAdapter->PacketFilter & ET131X_PACKET_TYPE_ALL_MULTICAST)) { + if ((etdev->PacketFilter & ET131X_PACKET_TYPE_MULTICAST) + && !(etdev->PacketFilter & ET131X_PACKET_TYPE_PROMISCUOUS) + && !(etdev->PacketFilter & ET131X_PACKET_TYPE_ALL_MULTICAST)) { pBufVa = pRxLocal->Fbr[ringIndex]-> Va[bufferIndex]; @@ -1092,20 +1092,20 @@ PMP_RFD nic_rx_pkts(struct et131x_adapter *pAdapter) * matches one in our list. */ for (nIndex = 0; - nIndex < pAdapter->MCAddressCount; + nIndex < etdev->MCAddressCount; nIndex++) { if (pBufVa[0] == - pAdapter->MCList[nIndex][0] + etdev->MCList[nIndex][0] && pBufVa[1] == - pAdapter->MCList[nIndex][1] + etdev->MCList[nIndex][1] && pBufVa[2] == - pAdapter->MCList[nIndex][2] + etdev->MCList[nIndex][2] && pBufVa[3] == - pAdapter->MCList[nIndex][3] + etdev->MCList[nIndex][3] && pBufVa[4] == - pAdapter->MCList[nIndex][4] + etdev->MCList[nIndex][4] && pBufVa[5] == - pAdapter->MCList[nIndex][5]) { + etdev->MCList[nIndex][5]) { break; } } @@ -1118,21 +1118,21 @@ PMP_RFD nic_rx_pkts(struct et131x_adapter *pAdapter) * so we free our RFD when we return * from this function. */ - if (nIndex == pAdapter->MCAddressCount) + if (nIndex == etdev->MCAddressCount) localLen = 0; } if (localLen > 0) - pAdapter->Stats.multircv++; + etdev->Stats.multircv++; } else if (Word0.value & ALCATEL_BROADCAST_PKT) - pAdapter->Stats.brdcstrcv++; + etdev->Stats.brdcstrcv++; else /* Not sure what this counter measures in * promiscuous mode. Perhaps we should check * the MAC address to see if it is directed * to us in promiscuous mode. */ - pAdapter->Stats.unircv++; + etdev->Stats.unircv++; } if (localLen > 0) { @@ -1149,14 +1149,14 @@ PMP_RFD nic_rx_pkts(struct et131x_adapter *pAdapter) return NULL; } - pAdapter->net_stats.rx_bytes += pMpRfd->PacketSize; + etdev->net_stats.rx_bytes += pMpRfd->PacketSize; memcpy(skb_put(skb, pMpRfd->PacketSize), pRxLocal->Fbr[ringIndex]->Va[bufferIndex], pMpRfd->PacketSize); - skb->dev = pAdapter->netdev; - skb->protocol = eth_type_trans(skb, pAdapter->netdev); + skb->dev = etdev->netdev; + skb->protocol = eth_type_trans(skb, etdev->netdev); skb->ip_summed = CHECKSUM_NONE; netif_rx(skb); @@ -1164,7 +1164,7 @@ PMP_RFD nic_rx_pkts(struct et131x_adapter *pAdapter) pMpRfd->PacketSize = 0; } - nic_return_rfd(pAdapter, pMpRfd); + nic_return_rfd(etdev, pMpRfd); DBG_RX(et131x_dbginfo, "(1)\n"); DBG_RX_LEAVE(et131x_dbginfo); @@ -1173,28 +1173,28 @@ PMP_RFD nic_rx_pkts(struct et131x_adapter *pAdapter) /** * et131x_reset_recv - Reset the receive list - * @pAdapter: pointer to our adapter + * @etdev: pointer to our adapter * * Assumption, Rcv spinlock has been acquired. */ -void et131x_reset_recv(struct et131x_adapter *pAdapter) +void et131x_reset_recv(struct et131x_adapter *etdev) { PMP_RFD pMpRfd; struct list_head *element; DBG_ENTER(et131x_dbginfo); - DBG_ASSERT(!list_empty(&pAdapter->RxRing.RecvList)); + DBG_ASSERT(!list_empty(&etdev->RxRing.RecvList)); /* Take all the RFD's from the pending list, and stick them on the * RecvList. */ - while (!list_empty(&pAdapter->RxRing.RecvPendingList)) { - element = pAdapter->RxRing.RecvPendingList.next; + while (!list_empty(&etdev->RxRing.RecvPendingList)) { + element = etdev->RxRing.RecvPendingList.next; pMpRfd = (PMP_RFD) list_entry(element, MP_RFD, list_node); - list_move_tail(&pMpRfd->list_node, &pAdapter->RxRing.RecvList); + list_move_tail(&pMpRfd->list_node, &etdev->RxRing.RecvList); } DBG_LEAVE(et131x_dbginfo); @@ -1202,11 +1202,11 @@ void et131x_reset_recv(struct et131x_adapter *pAdapter) /** * et131x_handle_recv_interrupt - Interrupt handler for receive processing - * @pAdapter: pointer to our adapter + * @etdev: pointer to our adapter * * Assumption, Rcv spinlock has been acquired. */ -void et131x_handle_recv_interrupt(struct et131x_adapter *pAdapter) +void et131x_handle_recv_interrupt(struct et131x_adapter *etdev) { PMP_RFD pMpRfd = NULL; struct sk_buff *PacketArray[NUM_PACKETS_HANDLED]; @@ -1222,14 +1222,14 @@ void et131x_handle_recv_interrupt(struct et131x_adapter *pAdapter) /* Process up to available RFD's */ while (PacketArrayCount < PacketsToHandle) { - if (list_empty(&pAdapter->RxRing.RecvList)) { - DBG_ASSERT(pAdapter->RxRing.nReadyRecv == 0); + if (list_empty(&etdev->RxRing.RecvList)) { + DBG_ASSERT(etdev->RxRing.nReadyRecv == 0); DBG_ERROR(et131x_dbginfo, "NO RFD's !!!!!!!!!!!!!\n"); TempUnfinishedRec = true; break; } - pMpRfd = nic_rx_pkts(pAdapter); + pMpRfd = nic_rx_pkts(etdev); if (pMpRfd == NULL) break; @@ -1240,18 +1240,18 @@ void et131x_handle_recv_interrupt(struct et131x_adapter *pAdapter) * If length is zero, return the RFD in order to advance the * Free buffer ring. */ - if ((!pAdapter->PacketFilter) || - (pAdapter->PoMgmt.PowerState != NdisDeviceStateD0) || - (!MP_LINK_DETECTED(pAdapter)) || + if ((!etdev->PacketFilter) || + (etdev->PoMgmt.PowerState != NdisDeviceStateD0) || + (!MP_LINK_DETECTED(etdev)) || (pMpRfd->PacketSize == 0)) { continue; } /* Increment the number of packets we received */ - pAdapter->Stats.ipackets++; + etdev->Stats.ipackets++; /* Set the status on the packet, either resources or success */ - if (pAdapter->RxRing.nReadyRecv >= RFD_LOW_WATER_MARK) { + if (etdev->RxRing.nReadyRecv >= RFD_LOW_WATER_MARK) { /* Put this RFD on the pending list * * NOTE: nic_rx_pkts() above is already returning the @@ -1260,13 +1260,13 @@ void et131x_handle_recv_interrupt(struct et131x_adapter *pAdapter) * Besides, we don't really need (at this point) the * pending list anyway. */ - /* spin_lock_irqsave( &pAdapter->RcvPendLock, lockflags ); - * list_add_tail( &pMpRfd->list_node, &pAdapter->RxRing.RecvPendingList ); - * spin_unlock_irqrestore( &pAdapter->RcvPendLock, lockflags ); + /* spin_lock_irqsave( &etdev->RcvPendLock, lockflags ); + * list_add_tail( &pMpRfd->list_node, &etdev->RxRing.RecvPendingList ); + * spin_unlock_irqrestore( &etdev->RcvPendLock, lockflags ); */ /* Update the number of outstanding Recvs */ - /* MP_INC_RCV_REF( pAdapter ); */ + /* MP_INC_RCV_REF( etdev ); */ } else { RFDFreeArray[PacketFreeCount] = pMpRfd; PacketFreeCount++; @@ -1280,12 +1280,12 @@ void et131x_handle_recv_interrupt(struct et131x_adapter *pAdapter) } if ((PacketArrayCount == NUM_PACKETS_HANDLED) || TempUnfinishedRec) { - pAdapter->RxRing.UnfinishedReceives = true; - writel(pAdapter->RegistryTxTimeInterval * NANO_IN_A_MICRO, - &pAdapter->CSRAddress->global.watchdog_timer); + etdev->RxRing.UnfinishedReceives = true; + writel(etdev->RegistryTxTimeInterval * NANO_IN_A_MICRO, + &etdev->CSRAddress->global.watchdog_timer); } else { /* Watchdog timer will disable itself if appropriate. */ - pAdapter->RxRing.UnfinishedReceives = false; + etdev->RxRing.UnfinishedReceives = false; } DBG_RX_LEAVE(et131x_dbginfo); @@ -1293,13 +1293,13 @@ void et131x_handle_recv_interrupt(struct et131x_adapter *pAdapter) /** * NICReturnRFD - Recycle a RFD and put it back onto the receive list - * @pAdapter: pointer to our adapter + * @etdev: pointer to our adapter * @pMpRfd: pointer to the RFD */ -void nic_return_rfd(struct et131x_adapter *pAdapter, PMP_RFD pMpRfd) +void nic_return_rfd(struct et131x_adapter *etdev, PMP_RFD pMpRfd) { - struct _rx_ring_t *pRxLocal = &pAdapter->RxRing; - struct _RXDMA_t __iomem *pRxDma = &pAdapter->CSRAddress->rxdma; + struct _rx_ring_t *pRxLocal = &etdev->RxRing; + struct _RXDMA_t __iomem *pRxDma = &etdev->CSRAddress->rxdma; uint16_t bi = pMpRfd->iBufferIndex; uint8_t ri = pMpRfd->iRingIndex; unsigned long lockflags; @@ -1314,7 +1314,7 @@ void nic_return_rfd(struct et131x_adapter *pAdapter, PMP_RFD pMpRfd) (ri == 0 && bi < pRxLocal->Fbr0NumEntries) || #endif (ri == 1 && bi < pRxLocal->Fbr1NumEntries)) { - spin_lock_irqsave(&pAdapter->FbrLock, lockflags); + spin_lock_irqsave(&etdev->FbrLock, lockflags); if (ri == 1) { PFBR_DESC_t pNextDesc = @@ -1362,7 +1362,7 @@ void nic_return_rfd(struct et131x_adapter *pAdapter, PMP_RFD pMpRfd) &pRxDma->fbr0_full_offset.value); } #endif - spin_unlock_irqrestore(&pAdapter->FbrLock, lockflags); + spin_unlock_irqrestore(&etdev->FbrLock, lockflags); } else { DBG_ERROR(et131x_dbginfo, "NICReturnRFD illegal Buffer Index returned\n"); @@ -1371,10 +1371,10 @@ void nic_return_rfd(struct et131x_adapter *pAdapter, PMP_RFD pMpRfd) /* The processing on this RFD is done, so put it back on the tail of * our list */ - spin_lock_irqsave(&pAdapter->RcvLock, lockflags); + spin_lock_irqsave(&etdev->RcvLock, lockflags); list_add_tail(&pMpRfd->list_node, &pRxLocal->RecvList); pRxLocal->nReadyRecv++; - spin_unlock_irqrestore(&pAdapter->RcvLock, lockflags); + spin_unlock_irqrestore(&etdev->RcvLock, lockflags); DBG_ASSERT(pRxLocal->nReadyRecv <= pRxLocal->NumRfd); DBG_RX_LEAVE(et131x_dbginfo); diff --git a/drivers/staging/et131x/et1310_tx.c b/drivers/staging/et131x/et1310_tx.c index b4e7726..db0f538 100644 --- a/drivers/staging/et131x/et1310_tx.c +++ b/drivers/staging/et131x/et1310_tx.c @@ -99,13 +99,13 @@ extern dbg_info_t *et131x_dbginfo; #endif /* CONFIG_ET131X_DEBUG */ -static void et131x_update_tcb_list(struct et131x_adapter *pAdapter); -static void et131x_check_send_wait_list(struct et131x_adapter *pAdapter); -static inline void et131x_free_send_packet(struct et131x_adapter *pAdapter, +static void et131x_update_tcb_list(struct et131x_adapter *etdev); +static void et131x_check_send_wait_list(struct et131x_adapter *etdev); +static inline void et131x_free_send_packet(struct et131x_adapter *etdev, PMP_TCB pMpTcb); static int et131x_send_packet(struct sk_buff *skb, - struct et131x_adapter *pAdapter); -static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb); + struct et131x_adapter *etdev); +static int nic_send_packet(struct et131x_adapter *etdev, PMP_TCB pMpTcb); /** * et131x_tx_dma_memory_alloc @@ -247,16 +247,16 @@ void et131x_tx_dma_memory_free(struct et131x_adapter *adapter) * ConfigTxDmaRegs - Set up the tx dma section of the JAGCore. * @adapter: pointer to our private adapter structure */ -void ConfigTxDmaRegs(struct et131x_adapter *pAdapter) +void ConfigTxDmaRegs(struct et131x_adapter *etdev) { - struct _TXDMA_t __iomem *pTxDma = &pAdapter->CSRAddress->txdma; + struct _TXDMA_t __iomem *pTxDma = &etdev->CSRAddress->txdma; DBG_ENTER(et131x_dbginfo); /* Load the hardware with the start of the transmit descriptor ring. */ - writel((uint32_t) (pAdapter->TxRing.pTxDescRingAdjustedPa >> 32), + writel((uint32_t) (etdev->TxRing.pTxDescRingAdjustedPa >> 32), &pTxDma->pr_base_hi); - writel((uint32_t) pAdapter->TxRing.pTxDescRingAdjustedPa, + writel((uint32_t) etdev->TxRing.pTxDescRingAdjustedPa, &pTxDma->pr_base_lo); /* Initialise the transmit DMA engine */ @@ -270,43 +270,43 @@ void ConfigTxDmaRegs(struct et131x_adapter *pAdapter) * storing the adjusted address. */ writel(0, &pTxDma->dma_wb_base_hi); - writel(pAdapter->TxRing.pTxStatusPa, &pTxDma->dma_wb_base_lo); + writel(etdev->TxRing.pTxStatusPa, &pTxDma->dma_wb_base_lo); - memset(pAdapter->TxRing.pTxStatusVa, 0, sizeof(TX_STATUS_BLOCK_t)); + memset(etdev->TxRing.pTxStatusVa, 0, sizeof(TX_STATUS_BLOCK_t)); writel(0, &pTxDma->service_request.value); - pAdapter->TxRing.txDmaReadyToSend.value = 0; + etdev->TxRing.txDmaReadyToSend.value = 0; DBG_LEAVE(et131x_dbginfo); } /** * et131x_tx_dma_disable - Stop of Tx_DMA on the ET1310 - * @pAdapter: pointer to our adapter structure + * @etdev: pointer to our adapter structure */ -void et131x_tx_dma_disable(struct et131x_adapter *pAdapter) +void et131x_tx_dma_disable(struct et131x_adapter *etdev) { DBG_ENTER(et131x_dbginfo); /* Setup the tramsmit dma configuration register */ - writel(0x101, &pAdapter->CSRAddress->txdma.csr.value); + writel(0x101, &etdev->CSRAddress->txdma.csr.value); DBG_LEAVE(et131x_dbginfo); } /** * et131x_tx_dma_enable - re-start of Tx_DMA on the ET1310. - * @pAdapter: pointer to our adapter structure + * @etdev: pointer to our adapter structure * * Mainly used after a return to the D0 (full-power) state from a lower state. */ -void et131x_tx_dma_enable(struct et131x_adapter *pAdapter) +void et131x_tx_dma_enable(struct et131x_adapter *etdev) { DBG_ENTER(et131x_dbginfo); - if (pAdapter->RegistryPhyLoopbk) { + if (etdev->RegistryPhyLoopbk) { /* TxDMA is disabled for loopback operation. */ - writel(0x101, &pAdapter->CSRAddress->txdma.csr.value); + writel(0x101, &etdev->CSRAddress->txdma.csr.value); } else { TXDMA_CSR_t csr = { 0 }; @@ -315,8 +315,8 @@ void et131x_tx_dma_enable(struct et131x_adapter *pAdapter) */ csr.bits.sngl_epkt_mode = 1; csr.bits.halt = 0; - csr.bits.cache_thrshld = pAdapter->RegistryDMACache; - writel(csr.value, &pAdapter->CSRAddress->txdma.csr.value); + csr.bits.cache_thrshld = etdev->RegistryDMACache; + writel(csr.value, &etdev->CSRAddress->txdma.csr.value); } DBG_LEAVE(et131x_dbginfo); @@ -377,11 +377,11 @@ void et131x_init_send(struct et131x_adapter *adapter) int et131x_send_packets(struct sk_buff *skb, struct net_device *netdev) { int status = 0; - struct et131x_adapter *pAdapter = NULL; + struct et131x_adapter *etdev = NULL; DBG_TX_ENTER(et131x_dbginfo); - pAdapter = netdev_priv(netdev); + etdev = netdev_priv(netdev); /* Send these packets * @@ -390,8 +390,8 @@ int et131x_send_packets(struct sk_buff *skb, struct net_device *netdev) */ /* Queue is not empty or TCB is not available */ - if (!list_empty(&pAdapter->TxRing.SendWaitQueue) || - MP_TCB_RESOURCES_NOT_AVAILABLE(pAdapter)) { + if (!list_empty(&etdev->TxRing.SendWaitQueue) || + MP_TCB_RESOURCES_NOT_AVAILABLE(etdev)) { /* NOTE: If there's an error on send, no need to queue the * packet under Linux; if we just send an error up to the * netif layer, it will resend the skb to us. @@ -403,10 +403,10 @@ int et131x_send_packets(struct sk_buff *skb, struct net_device *netdev) * netif layer think we're good and drop the packet */ /* - * if( MP_SHOULD_FAIL_SEND( pAdapter ) || - * pAdapter->DriverNoPhyAccess ) + * if( MP_SHOULD_FAIL_SEND( etdev ) || + * etdev->DriverNoPhyAccess ) */ - if (MP_SHOULD_FAIL_SEND(pAdapter) || pAdapter->DriverNoPhyAccess + if (MP_SHOULD_FAIL_SEND(etdev) || etdev->DriverNoPhyAccess || !netif_carrier_ok(netdev)) { DBG_VERBOSE(et131x_dbginfo, "Can't Tx, Link is DOWN; drop the packet\n"); @@ -414,9 +414,9 @@ int et131x_send_packets(struct sk_buff *skb, struct net_device *netdev) dev_kfree_skb_any(skb); skb = NULL; - pAdapter->net_stats.tx_dropped++; + etdev->net_stats.tx_dropped++; } else { - status = et131x_send_packet(skb, pAdapter); + status = et131x_send_packet(skb, etdev); if (status == -ENOMEM) { @@ -437,7 +437,7 @@ int et131x_send_packets(struct sk_buff *skb, struct net_device *netdev) dev_kfree_skb_any(skb); skb = NULL; - pAdapter->net_stats.tx_dropped++; + etdev->net_stats.tx_dropped++; } } } @@ -449,14 +449,14 @@ int et131x_send_packets(struct sk_buff *skb, struct net_device *netdev) /** * et131x_send_packet - Do the work to send a packet * @skb: the packet(s) to send - * @pAdapter: a pointer to the device's private adapter structure + * @etdev: a pointer to the device's private adapter structure * * Return 0 in almost all cases; non-zero value in extreme hard failure only. * * Assumption: Send spinlock has been acquired */ static int et131x_send_packet(struct sk_buff *skb, - struct et131x_adapter *pAdapter) + struct et131x_adapter *etdev) { int status = 0; PMP_TCB pMpTcb = NULL; @@ -482,24 +482,24 @@ static int et131x_send_packet(struct sk_buff *skb, } /* Get a TCB for this packet */ - spin_lock_irqsave(&pAdapter->TCBReadyQLock, lockflags); + spin_lock_irqsave(&etdev->TCBReadyQLock, lockflags); - pMpTcb = pAdapter->TxRing.TCBReadyQueueHead; + pMpTcb = etdev->TxRing.TCBReadyQueueHead; if (pMpTcb == NULL) { - spin_unlock_irqrestore(&pAdapter->TCBReadyQLock, lockflags); + spin_unlock_irqrestore(&etdev->TCBReadyQLock, lockflags); DBG_WARNING(et131x_dbginfo, "Can't obtain a TCB\n"); DBG_TX_LEAVE(et131x_dbginfo); return -ENOMEM; } - pAdapter->TxRing.TCBReadyQueueHead = pMpTcb->Next; + etdev->TxRing.TCBReadyQueueHead = pMpTcb->Next; - if (pAdapter->TxRing.TCBReadyQueueHead == NULL) - pAdapter->TxRing.TCBReadyQueueTail = NULL; + if (etdev->TxRing.TCBReadyQueueHead == NULL) + etdev->TxRing.TCBReadyQueueTail = NULL; - spin_unlock_irqrestore(&pAdapter->TCBReadyQLock, lockflags); + spin_unlock_irqrestore(&etdev->TCBReadyQLock, lockflags); pMpTcb->PacketLength = skb->len; pMpTcb->Packet = skb; @@ -519,27 +519,27 @@ static int et131x_send_packet(struct sk_buff *skb, /* Call the NIC specific send handler. */ if (status == 0) - status = nic_send_packet(pAdapter, pMpTcb); + status = nic_send_packet(etdev, pMpTcb); if (status != 0) { - spin_lock_irqsave(&pAdapter->TCBReadyQLock, lockflags); + spin_lock_irqsave(&etdev->TCBReadyQLock, lockflags); - if (pAdapter->TxRing.TCBReadyQueueTail) { - pAdapter->TxRing.TCBReadyQueueTail->Next = pMpTcb; + if (etdev->TxRing.TCBReadyQueueTail) { + etdev->TxRing.TCBReadyQueueTail->Next = pMpTcb; } else { /* Apparently ready Q is empty. */ - pAdapter->TxRing.TCBReadyQueueHead = pMpTcb; + etdev->TxRing.TCBReadyQueueHead = pMpTcb; } - pAdapter->TxRing.TCBReadyQueueTail = pMpTcb; + etdev->TxRing.TCBReadyQueueTail = pMpTcb; - spin_unlock_irqrestore(&pAdapter->TCBReadyQLock, lockflags); + spin_unlock_irqrestore(&etdev->TCBReadyQLock, lockflags); DBG_TX_LEAVE(et131x_dbginfo); return status; } - DBG_ASSERT(pAdapter->TxRing.nBusySend <= NUM_TCB); + DBG_ASSERT(etdev->TxRing.nBusySend <= NUM_TCB); DBG_TX_LEAVE(et131x_dbginfo); return 0; @@ -547,12 +547,12 @@ static int et131x_send_packet(struct sk_buff *skb, /** * nic_send_packet - NIC specific send handler for version B silicon. - * @pAdapter: pointer to our adapter + * @etdev: pointer to our adapter * @pMpTcb: pointer to MP_TCB * * Returns 0 or errno. */ -static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb) +static int nic_send_packet(struct et131x_adapter *etdev, PMP_TCB pMpTcb) { uint32_t loopIndex; TX_DESC_ENTRY_t CurDesc[24]; @@ -600,7 +600,7 @@ static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb) "filling desc entry %d, " "TCB: 0x%p\n", (pPacket->len - pPacket->data_len), - pAdapter->TxRing.txDmaReadyToSend.bits. + etdev->TxRing.txDmaReadyToSend.bits. val, pMpTcb); CurDesc[FragmentNumber].DataBufferPtrHigh = 0; @@ -618,7 +618,7 @@ static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb) * subsystem) */ CurDesc[FragmentNumber++].DataBufferPtrLow = - pci_map_single(pAdapter->pdev, + pci_map_single(etdev->pdev, pPacket->data, pPacket->len - pPacket->data_len, @@ -629,7 +629,7 @@ static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb) "filling desc entry %d, " "TCB: 0x%p\n", (pPacket->len - pPacket->data_len), - pAdapter->TxRing.txDmaReadyToSend.bits. + etdev->TxRing.txDmaReadyToSend.bits. val, pMpTcb); CurDesc[FragmentNumber].DataBufferPtrHigh = 0; @@ -647,7 +647,7 @@ static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb) * subsystem) */ CurDesc[FragmentNumber++].DataBufferPtrLow = - pci_map_single(pAdapter->pdev, + pci_map_single(etdev->pdev, pPacket->data, ((pPacket->len - pPacket->data_len) / 2), @@ -667,7 +667,7 @@ static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb) * subsystem) */ CurDesc[FragmentNumber++].DataBufferPtrLow = - pci_map_single(pAdapter->pdev, + pci_map_single(etdev->pdev, pPacket->data + ((pPacket->len - pPacket->data_len) / 2), @@ -681,7 +681,7 @@ static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb) "filling desc entry %d\n" "TCB: 0x%p\n", pFragList[loopIndex].size, - pAdapter->TxRing.txDmaReadyToSend.bits.val, + etdev->TxRing.txDmaReadyToSend.bits.val, pMpTcb); CurDesc[FragmentNumber].DataBufferPtrHigh = 0; @@ -696,7 +696,7 @@ static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb) * addressable (as defined by the pci/dma subsystem) */ CurDesc[FragmentNumber++].DataBufferPtrLow = - pci_map_page(pAdapter->pdev, + pci_map_page(etdev->pdev, pFragList[loopIndex - 1].page, pFragList[loopIndex - 1].page_offset, pFragList[loopIndex - 1].size, @@ -709,11 +709,11 @@ static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb) return -EIO; } - if (pAdapter->uiLinkSpeed == TRUEPHY_SPEED_1000MBPS) { - if (++pAdapter->TxRing.TxPacketsSinceLastinterrupt == - pAdapter->RegistryTxNumBuffers) { + if (etdev->uiLinkSpeed == TRUEPHY_SPEED_1000MBPS) { + if (++etdev->TxRing.TxPacketsSinceLastinterrupt == + etdev->RegistryTxNumBuffers) { CurDesc[FragmentNumber - 1].word3.value = 0x5; - pAdapter->TxRing.TxPacketsSinceLastinterrupt = 0; + etdev->TxRing.TxPacketsSinceLastinterrupt = 0; } else { CurDesc[FragmentNumber - 1].word3.value = 0x1; } @@ -723,13 +723,13 @@ static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb) CurDesc[0].word3.bits.f = 1; - pMpTcb->WrIndexStart = pAdapter->TxRing.txDmaReadyToSend; + pMpTcb->WrIndexStart = etdev->TxRing.txDmaReadyToSend; pMpTcb->PacketStaleCount = 0; - spin_lock_irqsave(&pAdapter->SendHWLock, lockflags1); + spin_lock_irqsave(&etdev->SendHWLock, lockflags1); iThisCopy = - NUM_DESC_PER_RING_TX - pAdapter->TxRing.txDmaReadyToSend.bits.val; + NUM_DESC_PER_RING_TX - etdev->TxRing.txDmaReadyToSend.bits.val; if (iThisCopy >= FragmentNumber) { iRemainder = 0; @@ -738,67 +738,67 @@ static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb) iRemainder = FragmentNumber - iThisCopy; } - memcpy(pAdapter->TxRing.pTxDescRingVa + - pAdapter->TxRing.txDmaReadyToSend.bits.val, CurDesc, + memcpy(etdev->TxRing.pTxDescRingVa + + etdev->TxRing.txDmaReadyToSend.bits.val, CurDesc, sizeof(TX_DESC_ENTRY_t) * iThisCopy); - pAdapter->TxRing.txDmaReadyToSend.bits.val += iThisCopy; + etdev->TxRing.txDmaReadyToSend.bits.val += iThisCopy; - if ((pAdapter->TxRing.txDmaReadyToSend.bits.val == 0) || - (pAdapter->TxRing.txDmaReadyToSend.bits.val == + if ((etdev->TxRing.txDmaReadyToSend.bits.val == 0) || + (etdev->TxRing.txDmaReadyToSend.bits.val == NUM_DESC_PER_RING_TX)) { - if (pAdapter->TxRing.txDmaReadyToSend.bits.wrap) - pAdapter->TxRing.txDmaReadyToSend.value = 0; + if (etdev->TxRing.txDmaReadyToSend.bits.wrap) + etdev->TxRing.txDmaReadyToSend.value = 0; else - pAdapter->TxRing.txDmaReadyToSend.value = 0x400; + etdev->TxRing.txDmaReadyToSend.value = 0x400; } if (iRemainder) { - memcpy(pAdapter->TxRing.pTxDescRingVa, + memcpy(etdev->TxRing.pTxDescRingVa, CurDesc + iThisCopy, sizeof(TX_DESC_ENTRY_t) * iRemainder); - pAdapter->TxRing.txDmaReadyToSend.bits.val += iRemainder; + etdev->TxRing.txDmaReadyToSend.bits.val += iRemainder; } - if (pAdapter->TxRing.txDmaReadyToSend.bits.val == 0) { - if (pAdapter->TxRing.txDmaReadyToSend.value) + if (etdev->TxRing.txDmaReadyToSend.bits.val == 0) { + if (etdev->TxRing.txDmaReadyToSend.value) pMpTcb->WrIndex.value = NUM_DESC_PER_RING_TX - 1; else pMpTcb->WrIndex.value = 0x400 | (NUM_DESC_PER_RING_TX - 1); } else pMpTcb->WrIndex.value = - pAdapter->TxRing.txDmaReadyToSend.value - 1; + etdev->TxRing.txDmaReadyToSend.value - 1; - spin_lock_irqsave(&pAdapter->TCBSendQLock, lockflags2); + spin_lock_irqsave(&etdev->TCBSendQLock, lockflags2); - if (pAdapter->TxRing.CurrSendTail) - pAdapter->TxRing.CurrSendTail->Next = pMpTcb; + if (etdev->TxRing.CurrSendTail) + etdev->TxRing.CurrSendTail->Next = pMpTcb; else - pAdapter->TxRing.CurrSendHead = pMpTcb; + etdev->TxRing.CurrSendHead = pMpTcb; - pAdapter->TxRing.CurrSendTail = pMpTcb; + etdev->TxRing.CurrSendTail = pMpTcb; DBG_ASSERT(pMpTcb->Next == NULL); - pAdapter->TxRing.nBusySend++; + etdev->TxRing.nBusySend++; - spin_unlock_irqrestore(&pAdapter->TCBSendQLock, lockflags2); + spin_unlock_irqrestore(&etdev->TCBSendQLock, lockflags2); /* Write the new write pointer back to the device. */ - writel(pAdapter->TxRing.txDmaReadyToSend.value, - &pAdapter->CSRAddress->txdma.service_request.value); + writel(etdev->TxRing.txDmaReadyToSend.value, + &etdev->CSRAddress->txdma.service_request.value); /* For Gig only, we use Tx Interrupt coalescing. Enable the software * timer to wake us up if this packet isn't followed by N more. */ - if (pAdapter->uiLinkSpeed == TRUEPHY_SPEED_1000MBPS) { - writel(pAdapter->RegistryTxTimeInterval * NANO_IN_A_MICRO, - &pAdapter->CSRAddress->global.watchdog_timer); + if (etdev->uiLinkSpeed == TRUEPHY_SPEED_1000MBPS) { + writel(etdev->RegistryTxTimeInterval * NANO_IN_A_MICRO, + &etdev->CSRAddress->global.watchdog_timer); } - spin_unlock_irqrestore(&pAdapter->SendHWLock, lockflags1); + spin_unlock_irqrestore(&etdev->SendHWLock, lockflags1); DBG_TX_LEAVE(et131x_dbginfo); return 0; @@ -812,7 +812,7 @@ static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb) /** * NICSendPacket - NIC specific send handler. - * @pAdapter: pointer to our adapter + * @etdev: pointer to our adapter * @pMpTcb: pointer to MP_TCB * * Returns 0 on succes, errno on failure. @@ -820,7 +820,7 @@ static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb) * This version of the send routine is designed for version A silicon. * Assumption - Send spinlock has been acquired. */ -static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb) +static int nic_send_packet(struct et131x_adapter *etdev, PMP_TCB pMpTcb) { uint32_t loopIndex, fragIndex, loopEnd; uint32_t iSplitFirstElement = 0; @@ -837,7 +837,7 @@ static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb) DBG_TX_ENTER(et131x_dbginfo); ServiceComplete.value = - readl(&pAdapter->CSRAddress->txdma.NewServiceComplete.value); + readl(&etdev->CSRAddress->txdma.NewServiceComplete.value); /* * Attempt to fix TWO hardware bugs: @@ -856,7 +856,7 @@ static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb) DBG_TX(et131x_dbginfo, "pMpTcb->PacketLength: %d\n", pMpTcb->PacketLength); - if ((pAdapter->uiDuplexMode == 0) + if ((etdev->uiDuplexMode == 0) && (pMpTcb->PacketLength < NIC_MIN_PACKET_SIZE)) { DBG_TX(et131x_dbginfo, "HALF DUPLEX mode AND len < MIN_PKT_SIZE\n"); @@ -875,28 +875,28 @@ static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb) SegmentSize = (pPacket->len - pPacket->data_len) / 2; } - spin_lock_irqsave(&pAdapter->SendHWLock, lockflags1); + spin_lock_irqsave(&etdev->SendHWLock, lockflags1); - if (pAdapter->TxRing.txDmaReadyToSend.bits.serv_req_wrap == + if (etdev->TxRing.txDmaReadyToSend.bits.serv_req_wrap == ServiceComplete.bits.serv_cpl_wrap) { /* The ring hasn't wrapped. Slots available should be * (RING_SIZE) - the difference between the two pointers. */ SlotsAvailable = NUM_DESC_PER_RING_TX - - (pAdapter->TxRing.txDmaReadyToSend.bits.serv_req - + (etdev->TxRing.txDmaReadyToSend.bits.serv_req - ServiceComplete.bits.serv_cpl); } else { /* The ring has wrapped. Slots available should be the * difference between the two pointers. */ SlotsAvailable = ServiceComplete.bits.serv_cpl - - pAdapter->TxRing.txDmaReadyToSend.bits.serv_req; + etdev->TxRing.txDmaReadyToSend.bits.serv_req; } if ((FragListCount + iSplitFirstElement) > SlotsAvailable) { DBG_WARNING(et131x_dbginfo, "Not Enough Space in Tx Desc Ring\n"); - spin_unlock_irqrestore(&pAdapter->SendHWLock, lockflags1); + spin_unlock_irqrestore(&etdev->SendHWLock, lockflags1); return -ENOMEM; } @@ -926,7 +926,7 @@ static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb) "Packet Length %d," "filling desc entry %d\n", pPacket->len, - pAdapter->TxRing.txDmaReadyToSend.bits.serv_req); + etdev->TxRing.txDmaReadyToSend.bits.serv_req); /* * NOTE - Should we do a paranoia check here to make sure the fragment @@ -962,7 +962,7 @@ static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb) length_in_bytes = SegmentSize; CurDesc.DataBufferPtrLow = - pci_map_single(pAdapter-> + pci_map_single(etdev-> pdev, pPacket-> data, @@ -990,7 +990,7 @@ static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb) pPacket->data_len) - SegmentSize); CurDesc.DataBufferPtrLow = - pci_map_single(pAdapter-> + pci_map_single(etdev-> pdev, (pPacket-> data + @@ -1014,7 +1014,7 @@ static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb) pPacket->len - pPacket->data_len; CurDesc.DataBufferPtrLow = - pci_map_single(pAdapter->pdev, + pci_map_single(etdev->pdev, pPacket->data, (pPacket->len - pPacket->data_len), @@ -1028,7 +1028,7 @@ static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb) CurDesc.word2.bits.length_in_bytes = pFragList[fragIndex - 1].size; CurDesc.DataBufferPtrLow = - pci_map_page(pAdapter->pdev, + pci_map_page(etdev->pdev, pFragList[fragIndex - 1].page, pFragList[fragIndex - 1].page_offset, @@ -1050,23 +1050,23 @@ static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb) CurDesc.word3.bits.f = 1; pMpTcb->WrIndexStart = - pAdapter->TxRing.txDmaReadyToSend; + etdev->TxRing.txDmaReadyToSend; } if ((loopIndex == (loopEnd - 1)) && - (pAdapter->uiDuplexMode || + (etdev->uiDuplexMode || (pMpTcb->PacketLength >= NIC_MIN_PACKET_SIZE))) { /* This is the Last descriptor of the packet */ DBG_TX(et131x_dbginfo, "THIS is our LAST descriptor\n"); - if (pAdapter->uiLinkSpeed == + if (etdev->uiLinkSpeed == TRUEPHY_SPEED_1000MBPS) { - if (++pAdapter->TxRing. + if (++etdev->TxRing. TxPacketsSinceLastinterrupt >= - pAdapter->RegistryTxNumBuffers) { + etdev->RegistryTxNumBuffers) { CurDesc.word3.value = 0x5; - pAdapter->TxRing. + etdev->TxRing. TxPacketsSinceLastinterrupt = 0; } else { @@ -1080,7 +1080,7 @@ static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb) * of packet */ pMpTcb->WrIndex = - pAdapter->TxRing.txDmaReadyToSend; + etdev->TxRing.txDmaReadyToSend; pMpTcb->PacketStaleCount = 0; } @@ -1088,13 +1088,13 @@ static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb) * descriptor ring at the next free entry. Advance * the "next free entry" variable */ - memcpy(pAdapter->TxRing.pTxDescRingVa + - pAdapter->TxRing.txDmaReadyToSend.bits.serv_req, + memcpy(etdev->TxRing.pTxDescRingVa + + etdev->TxRing.txDmaReadyToSend.bits.serv_req, &CurDesc, sizeof(TX_DESC_ENTRY_t)); CurDescPostCopy = - pAdapter->TxRing.pTxDescRingVa + - pAdapter->TxRing.txDmaReadyToSend.bits.serv_req; + etdev->TxRing.pTxDescRingVa + + etdev->TxRing.txDmaReadyToSend.bits.serv_req; DBG_TX(et131x_dbginfo, "CURRENT DESCRIPTOR\n" @@ -1109,32 +1109,32 @@ static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb) CurDescPostCopy->word2.value, CurDescPostCopy->word3.value); - if (++pAdapter->TxRing.txDmaReadyToSend.bits.serv_req >= + if (++etdev->TxRing.txDmaReadyToSend.bits.serv_req >= NUM_DESC_PER_RING_TX) { - if (pAdapter->TxRing.txDmaReadyToSend.bits. + if (etdev->TxRing.txDmaReadyToSend.bits. serv_req_wrap) { - pAdapter->TxRing.txDmaReadyToSend. + etdev->TxRing.txDmaReadyToSend. value = 0; } else { - pAdapter->TxRing.txDmaReadyToSend. + etdev->TxRing.txDmaReadyToSend. value = 0x400; } } } } - if (pAdapter->uiDuplexMode == 0 && + if (etdev->uiDuplexMode == 0 && pMpTcb->PacketLength < NIC_MIN_PACKET_SIZE) { /* NOTE - Same 32/64-bit issue as above... */ CurDesc.DataBufferPtrHigh = 0x0; - CurDesc.DataBufferPtrLow = pAdapter->TxRing.pTxDummyBlkPa; + CurDesc.DataBufferPtrLow = etdev->TxRing.pTxDummyBlkPa; CurDesc.word2.value = 0; - if (pAdapter->uiLinkSpeed == TRUEPHY_SPEED_1000MBPS) { - if (++pAdapter->TxRing.TxPacketsSinceLastinterrupt >= - pAdapter->RegistryTxNumBuffers) { + if (etdev->uiLinkSpeed == TRUEPHY_SPEED_1000MBPS) { + if (++etdev->TxRing.TxPacketsSinceLastinterrupt >= + etdev->RegistryTxNumBuffers) { CurDesc.word3.value = 0x5; - pAdapter->TxRing.TxPacketsSinceLastinterrupt = + etdev->TxRing.TxPacketsSinceLastinterrupt = 0; } else { CurDesc.word3.value = 0x1; @@ -1146,15 +1146,15 @@ static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb) CurDesc.word2.bits.length_in_bytes = NIC_MIN_PACKET_SIZE - pMpTcb->PacketLength; - pMpTcb->WrIndex = pAdapter->TxRing.txDmaReadyToSend; + pMpTcb->WrIndex = etdev->TxRing.txDmaReadyToSend; - memcpy(pAdapter->TxRing.pTxDescRingVa + - pAdapter->TxRing.txDmaReadyToSend.bits.serv_req, + memcpy(etdev->TxRing.pTxDescRingVa + + etdev->TxRing.txDmaReadyToSend.bits.serv_req, &CurDesc, sizeof(TX_DESC_ENTRY_t)); CurDescPostCopy = - pAdapter->TxRing.pTxDescRingVa + - pAdapter->TxRing.txDmaReadyToSend.bits.serv_req; + etdev->TxRing.pTxDescRingVa + + etdev->TxRing.txDmaReadyToSend.bits.serv_req; DBG_TX(et131x_dbginfo, "CURRENT DESCRIPTOR\n" @@ -1169,54 +1169,54 @@ static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb) CurDescPostCopy->word2.value, CurDescPostCopy->word3.value); - if (++pAdapter->TxRing.txDmaReadyToSend.bits.serv_req >= + if (++etdev->TxRing.txDmaReadyToSend.bits.serv_req >= NUM_DESC_PER_RING_TX) { - if (pAdapter->TxRing.txDmaReadyToSend.bits. + if (etdev->TxRing.txDmaReadyToSend.bits. serv_req_wrap) { - pAdapter->TxRing.txDmaReadyToSend.value = 0; + etdev->TxRing.txDmaReadyToSend.value = 0; } else { - pAdapter->TxRing.txDmaReadyToSend.value = 0x400; + etdev->TxRing.txDmaReadyToSend.value = 0x400; } } DBG_TX(et131x_dbginfo, "Padding descriptor %d by %d bytes\n", - /* pAdapter->TxRing.txDmaReadyToSend.value, */ - pAdapter->TxRing.txDmaReadyToSend.bits.serv_req, + /* etdev->TxRing.txDmaReadyToSend.value, */ + etdev->TxRing.txDmaReadyToSend.bits.serv_req, NIC_MIN_PACKET_SIZE - pMpTcb->PacketLength); } - spin_lock_irqsave(&pAdapter->TCBSendQLock, lockflags2); + spin_lock_irqsave(&etdev->TCBSendQLock, lockflags2); - if (pAdapter->TxRing.CurrSendTail) - pAdapter->TxRing.CurrSendTail->Next = pMpTcb; + if (etdev->TxRing.CurrSendTail) + etdev->TxRing.CurrSendTail->Next = pMpTcb; else - pAdapter->TxRing.CurrSendHead = pMpTcb; + etdev->TxRing.CurrSendHead = pMpTcb; - pAdapter->TxRing.CurrSendTail = pMpTcb; + etdev->TxRing.CurrSendTail = pMpTcb; DBG_ASSERT(pMpTcb->Next == NULL); - pAdapter->TxRing.nBusySend++; + etdev->TxRing.nBusySend++; - spin_unlock_irqrestore(&pAdapter->TCBSendQLock, lockflags2); + spin_unlock_irqrestore(&etdev->TCBSendQLock, lockflags2); /* Write the new write pointer back to the device. */ - writel(pAdapter->TxRing.txDmaReadyToSend.value, - &pAdapter->CSRAddress->txdma.service_request.value); + writel(etdev->TxRing.txDmaReadyToSend.value, + &etdev->CSRAddress->txdma.service_request.value); #ifdef CONFIG_ET131X_DEBUG - DumpDeviceBlock(DBG_TX_ON, pAdapter, 1); + DumpDeviceBlock(DBG_TX_ON, etdev, 1); #endif /* For Gig only, we use Tx Interrupt coalescing. Enable the software * timer to wake us up if this packet isn't followed by N more. */ - if (pAdapter->uiLinkSpeed == TRUEPHY_SPEED_1000MBPS) { - writel(pAdapter->RegistryTxTimeInterval * NANO_IN_A_MICRO, - &pAdapter->CSRAddress->global.watchdog_timer); + if (etdev->uiLinkSpeed == TRUEPHY_SPEED_1000MBPS) { + writel(etdev->RegistryTxTimeInterval * NANO_IN_A_MICRO, + &etdev->CSRAddress->global.watchdog_timer); } - spin_unlock_irqrestore(&pAdapter->SendHWLock, lockflags1); + spin_unlock_irqrestore(&etdev->SendHWLock, lockflags1); DBG_TX_LEAVE(et131x_dbginfo); return 0; @@ -1226,24 +1226,24 @@ static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb) /** * et131x_free_send_packet - Recycle a MP_TCB, complete the packet if necessary - * @pAdapter: pointer to our adapter + * @etdev: pointer to our adapter * @pMpTcb: pointer to MP_TCB * * Assumption - Send spinlock has been acquired */ -inline void et131x_free_send_packet(struct et131x_adapter *pAdapter, +inline void et131x_free_send_packet(struct et131x_adapter *etdev, PMP_TCB pMpTcb) { unsigned long lockflags; TX_DESC_ENTRY_t *desc = NULL; - struct net_device_stats *stats = &pAdapter->net_stats; + struct net_device_stats *stats = &etdev->net_stats; if (MP_TEST_FLAG(pMpTcb, fMP_DEST_BROAD)) - atomic_inc(&pAdapter->Stats.brdcstxmt); + atomic_inc(&etdev->Stats.brdcstxmt); else if (MP_TEST_FLAG(pMpTcb, fMP_DEST_MULTI)) - atomic_inc(&pAdapter->Stats.multixmt); + atomic_inc(&etdev->Stats.multixmt); else - atomic_inc(&pAdapter->Stats.unixmt); + atomic_inc(&etdev->Stats.unixmt); if (pMpTcb->Packet) { stats->tx_bytes += pMpTcb->Packet->len; @@ -1271,7 +1271,7 @@ inline void et131x_free_send_packet(struct et131x_adapter *pAdapter, do { desc = - (TX_DESC_ENTRY_t *) (pAdapter->TxRing. + (TX_DESC_ENTRY_t *) (etdev->TxRing. pTxDescRingVa + pMpTcb->WrIndexStart.bits.val); @@ -1288,7 +1288,7 @@ inline void et131x_free_send_packet(struct et131x_adapter *pAdapter, desc->word2.value, desc->word3.value); - pci_unmap_single(pAdapter->pdev, + pci_unmap_single(etdev->pdev, desc->DataBufferPtrLow, desc->word2.value, PCI_DMA_TODEVICE); @@ -1299,7 +1299,7 @@ inline void et131x_free_send_packet(struct et131x_adapter *pAdapter, else pMpTcb->WrIndexStart.value = 0x400; } - } while (desc != (pAdapter->TxRing.pTxDescRingVa + + } while (desc != (etdev->TxRing.pTxDescRingVa + pMpTcb->WrIndex.bits.val)); DBG_TX(et131x_dbginfo, @@ -1311,31 +1311,31 @@ inline void et131x_free_send_packet(struct et131x_adapter *pAdapter, memset(pMpTcb, 0, sizeof(MP_TCB)); /* Add the TCB to the Ready Q */ - spin_lock_irqsave(&pAdapter->TCBReadyQLock, lockflags); + spin_lock_irqsave(&etdev->TCBReadyQLock, lockflags); - pAdapter->Stats.opackets++; + etdev->Stats.opackets++; - if (pAdapter->TxRing.TCBReadyQueueTail) { - pAdapter->TxRing.TCBReadyQueueTail->Next = pMpTcb; + if (etdev->TxRing.TCBReadyQueueTail) { + etdev->TxRing.TCBReadyQueueTail->Next = pMpTcb; } else { /* Apparently ready Q is empty. */ - pAdapter->TxRing.TCBReadyQueueHead = pMpTcb; + etdev->TxRing.TCBReadyQueueHead = pMpTcb; } - pAdapter->TxRing.TCBReadyQueueTail = pMpTcb; + etdev->TxRing.TCBReadyQueueTail = pMpTcb; - spin_unlock_irqrestore(&pAdapter->TCBReadyQLock, lockflags); + spin_unlock_irqrestore(&etdev->TCBReadyQLock, lockflags); - DBG_ASSERT(pAdapter->TxRing.nBusySend >= 0); + DBG_ASSERT(etdev->TxRing.nBusySend >= 0); } /** * et131x_free_busy_send_packets - Free and complete the stopped active sends - * @pAdapter: pointer to our adapter + * @etdev: pointer to our adapter * * Assumption - Send spinlock has been acquired */ -void et131x_free_busy_send_packets(struct et131x_adapter *pAdapter) +void et131x_free_busy_send_packets(struct et131x_adapter *etdev) { PMP_TCB pMpTcb; struct list_head *pEntry; @@ -1344,42 +1344,42 @@ void et131x_free_busy_send_packets(struct et131x_adapter *pAdapter) DBG_ENTER(et131x_dbginfo); - while (!list_empty(&pAdapter->TxRing.SendWaitQueue)) { - spin_lock_irqsave(&pAdapter->SendWaitLock, lockflags); + while (!list_empty(&etdev->TxRing.SendWaitQueue)) { + spin_lock_irqsave(&etdev->SendWaitLock, lockflags); - pAdapter->TxRing.nWaitSend--; - spin_unlock_irqrestore(&pAdapter->SendWaitLock, lockflags); + etdev->TxRing.nWaitSend--; + spin_unlock_irqrestore(&etdev->SendWaitLock, lockflags); - pEntry = pAdapter->TxRing.SendWaitQueue.next; + pEntry = etdev->TxRing.SendWaitQueue.next; } - pAdapter->TxRing.nWaitSend = 0; + etdev->TxRing.nWaitSend = 0; /* Any packets being sent? Check the first TCB on the send list */ - spin_lock_irqsave(&pAdapter->TCBSendQLock, lockflags); + spin_lock_irqsave(&etdev->TCBSendQLock, lockflags); - pMpTcb = pAdapter->TxRing.CurrSendHead; + pMpTcb = etdev->TxRing.CurrSendHead; while ((pMpTcb != NULL) && (FreeCounter < NUM_TCB)) { PMP_TCB pNext = pMpTcb->Next; - pAdapter->TxRing.CurrSendHead = pNext; + etdev->TxRing.CurrSendHead = pNext; if (pNext == NULL) - pAdapter->TxRing.CurrSendTail = NULL; + etdev->TxRing.CurrSendTail = NULL; - pAdapter->TxRing.nBusySend--; + etdev->TxRing.nBusySend--; - spin_unlock_irqrestore(&pAdapter->TCBSendQLock, lockflags); + spin_unlock_irqrestore(&etdev->TCBSendQLock, lockflags); DBG_VERBOSE(et131x_dbginfo, "pMpTcb = 0x%p\n", pMpTcb); FreeCounter++; - MP_FREE_SEND_PACKET_FUN(pAdapter, pMpTcb); + MP_FREE_SEND_PACKET_FUN(etdev, pMpTcb); - spin_lock_irqsave(&pAdapter->TCBSendQLock, lockflags); + spin_lock_irqsave(&etdev->TCBSendQLock, lockflags); - pMpTcb = pAdapter->TxRing.CurrSendHead; + pMpTcb = etdev->TxRing.CurrSendHead; } if (FreeCounter == NUM_TCB) { @@ -1388,125 +1388,125 @@ void et131x_free_busy_send_packets(struct et131x_adapter *pAdapter) BUG(); } - spin_unlock_irqrestore(&pAdapter->TCBSendQLock, lockflags); + spin_unlock_irqrestore(&etdev->TCBSendQLock, lockflags); - pAdapter->TxRing.nBusySend = 0; + etdev->TxRing.nBusySend = 0; DBG_LEAVE(et131x_dbginfo); } /** * et131x_handle_send_interrupt - Interrupt handler for sending processing - * @pAdapter: pointer to our adapter + * @etdev: pointer to our adapter * * Re-claim the send resources, complete sends and get more to send from * the send wait queue. * * Assumption - Send spinlock has been acquired */ -void et131x_handle_send_interrupt(struct et131x_adapter *pAdapter) +void et131x_handle_send_interrupt(struct et131x_adapter *etdev) { DBG_TX_ENTER(et131x_dbginfo); /* Mark as completed any packets which have been sent by the device. */ - et131x_update_tcb_list(pAdapter); + et131x_update_tcb_list(etdev); /* If we queued any transmits because we didn't have any TCBs earlier, * dequeue and send those packets now, as long as we have free TCBs. */ - et131x_check_send_wait_list(pAdapter); + et131x_check_send_wait_list(etdev); DBG_TX_LEAVE(et131x_dbginfo); } /** * et131x_update_tcb_list - Helper routine for Send Interrupt handler - * @pAdapter: pointer to our adapter + * @etdev: pointer to our adapter * * Re-claims the send resources and completes sends. Can also be called as * part of the NIC send routine when the "ServiceComplete" indication has * wrapped. */ -static void et131x_update_tcb_list(struct et131x_adapter *pAdapter) +static void et131x_update_tcb_list(struct et131x_adapter *etdev) { unsigned long lockflags; DMA10W_t ServiceComplete; PMP_TCB pMpTcb; ServiceComplete.value = - readl(&pAdapter->CSRAddress->txdma.NewServiceComplete.value); + readl(&etdev->CSRAddress->txdma.NewServiceComplete.value); /* Has the ring wrapped? Process any descriptors that do not have * the same "wrap" indicator as the current completion indicator */ - spin_lock_irqsave(&pAdapter->TCBSendQLock, lockflags); + spin_lock_irqsave(&etdev->TCBSendQLock, lockflags); - pMpTcb = pAdapter->TxRing.CurrSendHead; + pMpTcb = etdev->TxRing.CurrSendHead; while (pMpTcb && ServiceComplete.bits.wrap != pMpTcb->WrIndex.bits.wrap && ServiceComplete.bits.val < pMpTcb->WrIndex.bits.val) { - pAdapter->TxRing.nBusySend--; - pAdapter->TxRing.CurrSendHead = pMpTcb->Next; + etdev->TxRing.nBusySend--; + etdev->TxRing.CurrSendHead = pMpTcb->Next; if (pMpTcb->Next == NULL) - pAdapter->TxRing.CurrSendTail = NULL; + etdev->TxRing.CurrSendTail = NULL; - spin_unlock_irqrestore(&pAdapter->TCBSendQLock, lockflags); - MP_FREE_SEND_PACKET_FUN(pAdapter, pMpTcb); - spin_lock_irqsave(&pAdapter->TCBSendQLock, lockflags); + spin_unlock_irqrestore(&etdev->TCBSendQLock, lockflags); + MP_FREE_SEND_PACKET_FUN(etdev, pMpTcb); + spin_lock_irqsave(&etdev->TCBSendQLock, lockflags); /* Goto the next packet */ - pMpTcb = pAdapter->TxRing.CurrSendHead; + pMpTcb = etdev->TxRing.CurrSendHead; } while (pMpTcb && ServiceComplete.bits.wrap == pMpTcb->WrIndex.bits.wrap && ServiceComplete.bits.val > pMpTcb->WrIndex.bits.val) { - pAdapter->TxRing.nBusySend--; - pAdapter->TxRing.CurrSendHead = pMpTcb->Next; + etdev->TxRing.nBusySend--; + etdev->TxRing.CurrSendHead = pMpTcb->Next; if (pMpTcb->Next == NULL) - pAdapter->TxRing.CurrSendTail = NULL; + etdev->TxRing.CurrSendTail = NULL; - spin_unlock_irqrestore(&pAdapter->TCBSendQLock, lockflags); - MP_FREE_SEND_PACKET_FUN(pAdapter, pMpTcb); - spin_lock_irqsave(&pAdapter->TCBSendQLock, lockflags); + spin_unlock_irqrestore(&etdev->TCBSendQLock, lockflags); + MP_FREE_SEND_PACKET_FUN(etdev, pMpTcb); + spin_lock_irqsave(&etdev->TCBSendQLock, lockflags); /* Goto the next packet */ - pMpTcb = pAdapter->TxRing.CurrSendHead; + pMpTcb = etdev->TxRing.CurrSendHead; } /* Wake up the queue when we hit a low-water mark */ - if (pAdapter->TxRing.nBusySend <= (NUM_TCB / 3)) - netif_wake_queue(pAdapter->netdev); + if (etdev->TxRing.nBusySend <= (NUM_TCB / 3)) + netif_wake_queue(etdev->netdev); - spin_unlock_irqrestore(&pAdapter->TCBSendQLock, lockflags); + spin_unlock_irqrestore(&etdev->TCBSendQLock, lockflags); } /** * et131x_check_send_wait_list - Helper routine for the interrupt handler - * @pAdapter: pointer to our adapter + * @etdev: pointer to our adapter * * Takes packets from the send wait queue and posts them to the device (if * room available). */ -static void et131x_check_send_wait_list(struct et131x_adapter *pAdapter) +static void et131x_check_send_wait_list(struct et131x_adapter *etdev) { unsigned long lockflags; - spin_lock_irqsave(&pAdapter->SendWaitLock, lockflags); + spin_lock_irqsave(&etdev->SendWaitLock, lockflags); - while (!list_empty(&pAdapter->TxRing.SendWaitQueue) && - MP_TCB_RESOURCES_AVAILABLE(pAdapter)) { + while (!list_empty(&etdev->TxRing.SendWaitQueue) && + MP_TCB_RESOURCES_AVAILABLE(etdev)) { struct list_head *pEntry; DBG_VERBOSE(et131x_dbginfo, "Tx packets on the wait queue\n"); - pEntry = pAdapter->TxRing.SendWaitQueue.next; + pEntry = etdev->TxRing.SendWaitQueue.next; - pAdapter->TxRing.nWaitSend--; + etdev->TxRing.nWaitSend--; DBG_WARNING(et131x_dbginfo, "MpHandleSendInterrupt - sent a queued pkt. Waiting %d\n", - pAdapter->TxRing.nWaitSend); + etdev->TxRing.nWaitSend); } - spin_unlock_irqrestore(&pAdapter->SendWaitLock, lockflags); + spin_unlock_irqrestore(&etdev->SendWaitLock, lockflags); } diff --git a/drivers/staging/et131x/et131x_config.c b/drivers/staging/et131x/et131x_config.c index 15e6d4e..148672bc 100644 --- a/drivers/staging/et131x/et131x_config.c +++ b/drivers/staging/et131x/et131x_config.c @@ -202,12 +202,12 @@ MODULE_PARM_DESC(et131x_speed_set, /** * et131x_config_parse - * @pAdapter: pointer to the private adapter struct + * @etdev: pointer to the private adapter struct * * Parses a configuration from some location (module parameters, for example) * into the private adapter struct */ -void et131x_config_parse(struct et131x_adapter *pAdapter) +void et131x_config_parse(struct et131x_adapter *etdev) { uint8_t macAddrDef[] = PARM_MAC_ADDRESS_DEF; @@ -237,85 +237,85 @@ void et131x_config_parse(struct et131x_adapter *pAdapter) if (et131x_speed_set != PARM_SPEED_DUPLEX_DEF) { DBG_VERBOSE(et131x_dbginfo, "Speed set manually to : %d \n", et131x_speed_set); - pAdapter->SpeedDuplex = et131x_speed_set; + etdev->SpeedDuplex = et131x_speed_set; } else { - pAdapter->SpeedDuplex = PARM_SPEED_DUPLEX_DEF; + etdev->SpeedDuplex = PARM_SPEED_DUPLEX_DEF; } - /* pAdapter->SpeedDuplex = PARM_SPEED_DUPLEX_DEF; */ - - pAdapter->RegistryVlanTag = PARM_VLAN_TAG_DEF; - pAdapter->RegistryFlowControl = PARM_FLOW_CTL_DEF; - pAdapter->RegistryWOLLink = PARM_WOL_LINK_DEF; - pAdapter->RegistryWOLMatch = PARM_WOL_MATCH_DEF; - pAdapter->RegistryJumboPacket = PARM_JUMBO_PKT_DEF; - pAdapter->RegistryPhyComa = PARM_PHY_COMA_DEF; - pAdapter->RegistryRxNumBuffers = PARM_RX_NUM_BUFS_DEF; - pAdapter->RegistryRxTimeInterval = PARM_RX_TIME_INT_DEF; - pAdapter->RegistryTxNumBuffers = PARM_TX_NUM_BUFS_DEF; - pAdapter->RegistryTxTimeInterval = PARM_TX_TIME_INT_DEF; - pAdapter->RegistryRxMemEnd = PARM_RX_MEM_END_DEF; - pAdapter->RegistryMACStat = PARM_MAC_STAT_DEF; - pAdapter->RegistrySCGain = PARM_SC_GAIN_DEF; - pAdapter->RegistryPMWOL = PARM_PM_WOL_DEF; + /* etdev->SpeedDuplex = PARM_SPEED_DUPLEX_DEF; */ + + etdev->RegistryVlanTag = PARM_VLAN_TAG_DEF; + etdev->RegistryFlowControl = PARM_FLOW_CTL_DEF; + etdev->RegistryWOLLink = PARM_WOL_LINK_DEF; + etdev->RegistryWOLMatch = PARM_WOL_MATCH_DEF; + etdev->RegistryJumboPacket = PARM_JUMBO_PKT_DEF; + etdev->RegistryPhyComa = PARM_PHY_COMA_DEF; + etdev->RegistryRxNumBuffers = PARM_RX_NUM_BUFS_DEF; + etdev->RegistryRxTimeInterval = PARM_RX_TIME_INT_DEF; + etdev->RegistryTxNumBuffers = PARM_TX_NUM_BUFS_DEF; + etdev->RegistryTxTimeInterval = PARM_TX_TIME_INT_DEF; + etdev->RegistryRxMemEnd = PARM_RX_MEM_END_DEF; + etdev->RegistryMACStat = PARM_MAC_STAT_DEF; + etdev->RegistrySCGain = PARM_SC_GAIN_DEF; + etdev->RegistryPMWOL = PARM_PM_WOL_DEF; if (et131x_nmi_disable != PARM_NMI_DISABLE_DEF) - pAdapter->RegistryNMIDisable = et131x_nmi_disable; + etdev->RegistryNMIDisable = et131x_nmi_disable; else - pAdapter->RegistryNMIDisable = PARM_NMI_DISABLE_DEF; + etdev->RegistryNMIDisable = PARM_NMI_DISABLE_DEF; - pAdapter->RegistryDMACache = PARM_DMA_CACHE_DEF; - pAdapter->RegistryPhyLoopbk = PARM_PHY_LOOPBK_DEF; + etdev->RegistryDMACache = PARM_DMA_CACHE_DEF; + etdev->RegistryPhyLoopbk = PARM_PHY_LOOPBK_DEF; /* Set the MAC address to a default */ - memcpy(pAdapter->CurrentAddress, macAddrDef, ETH_ALEN); - pAdapter->bOverrideAddress = false; + memcpy(etdev->CurrentAddress, macAddrDef, ETH_ALEN); + etdev->bOverrideAddress = false; DBG_TRACE(et131x_dbginfo, "Default MAC Address : %02x:%02x:%02x:%02x:%02x:%02x\n", - pAdapter->CurrentAddress[0], pAdapter->CurrentAddress[1], - pAdapter->CurrentAddress[2], pAdapter->CurrentAddress[3], - pAdapter->CurrentAddress[4], pAdapter->CurrentAddress[5]); + etdev->CurrentAddress[0], etdev->CurrentAddress[1], + etdev->CurrentAddress[2], etdev->CurrentAddress[3], + etdev->CurrentAddress[4], etdev->CurrentAddress[5]); /* Decode SpeedDuplex * * Set up as if we are auto negotiating always and then change if we * go into force mode */ - pAdapter->AiForceSpeed = 0; /* Auto speed */ - pAdapter->AiForceDpx = 0; /* Auto FDX */ + etdev->AiForceSpeed = 0; /* Auto speed */ + etdev->AiForceDpx = 0; /* Auto FDX */ /* If we are the 10/100 device, and gigabit is somehow requested then * knock it down to 100 full. */ - if (pAdapter->DeviceID == ET131X_PCI_DEVICE_ID_FAST && - pAdapter->SpeedDuplex == 5) - pAdapter->SpeedDuplex = 4; + if (etdev->DeviceID == ET131X_PCI_DEVICE_ID_FAST && + etdev->SpeedDuplex == 5) + etdev->SpeedDuplex = 4; - switch (pAdapter->SpeedDuplex) { + switch (etdev->SpeedDuplex) { case 1: /* 10Mb Half-Duplex */ - pAdapter->AiForceSpeed = 10; - pAdapter->AiForceDpx = 1; + etdev->AiForceSpeed = 10; + etdev->AiForceDpx = 1; break; case 2: /* 10Mb Full-Duplex */ - pAdapter->AiForceSpeed = 10; - pAdapter->AiForceDpx = 2; + etdev->AiForceSpeed = 10; + etdev->AiForceDpx = 2; break; case 3: /* 100Mb Half-Duplex */ - pAdapter->AiForceSpeed = 100; - pAdapter->AiForceDpx = 1; + etdev->AiForceSpeed = 100; + etdev->AiForceDpx = 1; break; case 4: /* 100Mb Full-Duplex */ - pAdapter->AiForceSpeed = 100; - pAdapter->AiForceDpx = 2; + etdev->AiForceSpeed = 100; + etdev->AiForceDpx = 2; break; case 5: /* 1000Mb Full-Duplex */ - pAdapter->AiForceSpeed = 1000; - pAdapter->AiForceDpx = 2; + etdev->AiForceSpeed = 1000; + etdev->AiForceDpx = 2; break; } diff --git a/drivers/staging/et131x/et131x_debug.c b/drivers/staging/et131x/et131x_debug.c index c7f64a8..2730b9c 100644 --- a/drivers/staging/et131x/et131x_debug.c +++ b/drivers/staging/et131x/et131x_debug.c @@ -106,11 +106,11 @@ extern dbg_info_t *et131x_dbginfo; /** * DumpTxQueueContents - Dump out the tx queue and the shadow pointers - * @pAdapter: pointer to our adapter structure + * @etdev: pointer to our adapter structure */ -void DumpTxQueueContents(int dbgLvl, struct et131x_adapter *pAdapter) +void DumpTxQueueContents(int dbgLvl, struct et131x_adapter *etdev) { - MMC_t __iomem *mmc = &pAdapter->CSRAddress->mmc; + MMC_t __iomem *mmc = &etdev->CSRAddress->mmc; uint32_t TxQueueAddr; if (DBG_FLAGS(et131x_dbginfo) & dbgLvl) { @@ -134,24 +134,24 @@ void DumpTxQueueContents(int dbgLvl, struct et131x_adapter *pAdapter) } DBG_PRINT("Shadow Pointers 0x%08x\n", - readl(&pAdapter->CSRAddress->txmac.shadow_ptr.value)); + readl(&etdev->CSRAddress->txmac.shadow_ptr.value)); } } /** * DumpDeviceBlock - * @pAdapter: pointer to our adapter + * @etdev: pointer to our adapter * * Dumps the first 64 regs of each block of the et-1310 (each block is * mapped to a new page, each page is 4096 bytes). */ #define NUM_BLOCKS 8 -void DumpDeviceBlock(int dbgLvl, struct et131x_adapter *pAdapter, +void DumpDeviceBlock(int dbgLvl, struct et131x_adapter *etdev, uint32_t Block) { uint32_t Address1, Address2; uint32_t __iomem *BigDevicePointer = - (uint32_t __iomem *) pAdapter->CSRAddress; + (uint32_t __iomem *) etdev->CSRAddress; const char *BlockNames[NUM_BLOCKS] = { "Global", "Tx DMA", "Rx DMA", "Tx MAC", "Rx MAC", "MAC", "MAC Stat", "MMC" @@ -179,17 +179,17 @@ void DumpDeviceBlock(int dbgLvl, struct et131x_adapter *pAdapter, /** * DumpDeviceReg - * @pAdapter: pointer to our adapter + * @etdev: pointer to our adapter * * Dumps the first 64 regs of each block of the et-1310 (each block is * mapped to a new page, each page is 4096 bytes). */ -void DumpDeviceReg(int dbgLvl, struct et131x_adapter *pAdapter) +void DumpDeviceReg(int dbgLvl, struct et131x_adapter *etdev) { uint32_t Address1, Address2; uint32_t Block; uint32_t __iomem *BigDevicePointer = - (uint32_t __iomem *) pAdapter->CSRAddress; + (uint32_t __iomem *) etdev->CSRAddress; uint32_t __iomem *Pointer; const char *BlockNames[NUM_BLOCKS] = { "Global", "Tx DMA", "Rx DMA", "Tx MAC", diff --git a/drivers/staging/et131x/et131x_initpci.c b/drivers/staging/et131x/et131x_initpci.c index c934589..8455e0a 100644 --- a/drivers/staging/et131x/et131x_initpci.c +++ b/drivers/staging/et131x/et131x_initpci.c @@ -447,40 +447,40 @@ int et131x_find_adapter(struct et131x_adapter *adapter, struct pci_dev *pdev) */ void et131x_error_timer_handler(unsigned long data) { - struct et131x_adapter *pAdapter = (struct et131x_adapter *) data; + struct et131x_adapter *etdev = (struct et131x_adapter *) data; PM_CSR_t pm_csr; - pm_csr.value = readl(&pAdapter->CSRAddress->global.pm_csr.value); + pm_csr.value = readl(&etdev->CSRAddress->global.pm_csr.value); if (pm_csr.bits.pm_phy_sw_coma == 0) { - if (pAdapter->RegistryMACStat) - UpdateMacStatHostCounters(pAdapter); + if (etdev->RegistryMACStat) + UpdateMacStatHostCounters(etdev); } else DBG_VERBOSE(et131x_dbginfo, "No interrupts, in PHY coma, pm_csr = 0x%x\n", pm_csr.value); - if (!pAdapter->Bmsr.bits.link_status && - pAdapter->RegistryPhyComa && - pAdapter->PoMgmt.TransPhyComaModeOnBoot < 11) { - pAdapter->PoMgmt.TransPhyComaModeOnBoot++; + if (!etdev->Bmsr.bits.link_status && + etdev->RegistryPhyComa && + etdev->PoMgmt.TransPhyComaModeOnBoot < 11) { + etdev->PoMgmt.TransPhyComaModeOnBoot++; } - if (pAdapter->PoMgmt.TransPhyComaModeOnBoot == 10) { - if (!pAdapter->Bmsr.bits.link_status - && pAdapter->RegistryPhyComa) { + if (etdev->PoMgmt.TransPhyComaModeOnBoot == 10) { + if (!etdev->Bmsr.bits.link_status + && etdev->RegistryPhyComa) { if (pm_csr.bits.pm_phy_sw_coma == 0) { /* NOTE - This was originally a 'sync with * interrupt'. How to do that under Linux? */ - et131x_enable_interrupts(pAdapter); - EnablePhyComa(pAdapter); + et131x_enable_interrupts(etdev); + EnablePhyComa(etdev); } } } /* This is a periodic timer, so reschedule */ - mod_timer(&pAdapter->ErrorTimer, jiffies + + mod_timer(&etdev->ErrorTimer, jiffies + TX_ERROR_PERIOD * HZ / 1000); } @@ -491,23 +491,23 @@ void et131x_error_timer_handler(unsigned long data) */ void et131x_link_detection_handler(unsigned long data) { - struct et131x_adapter *pAdapter = (struct et131x_adapter *) data; + struct et131x_adapter *etdev = (struct et131x_adapter *) data; unsigned long lockflags; /* Let everyone know that we have run */ - pAdapter->bLinkTimerActive = false; + etdev->bLinkTimerActive = false; - if (pAdapter->MediaState == 0) { - spin_lock_irqsave(&pAdapter->Lock, lockflags); + if (etdev->MediaState == 0) { + spin_lock_irqsave(&etdev->Lock, lockflags); - pAdapter->MediaState = NETIF_STATUS_MEDIA_DISCONNECT; - MP_CLEAR_FLAG(pAdapter, fMP_ADAPTER_LINK_DETECTION); + etdev->MediaState = NETIF_STATUS_MEDIA_DISCONNECT; + MP_CLEAR_FLAG(etdev, fMP_ADAPTER_LINK_DETECTION); - spin_unlock_irqrestore(&pAdapter->Lock, lockflags); + spin_unlock_irqrestore(&etdev->Lock, lockflags); - netif_carrier_off(pAdapter->netdev); + netif_carrier_off(etdev->netdev); - pAdapter->bSetPending = false; + etdev->bSetPending = false; } } @@ -517,54 +517,54 @@ void et131x_link_detection_handler(unsigned long data) * * Returns 0 on success, errno on failure (as defined in errno.h) */ -int et131x_adapter_setup(struct et131x_adapter *pAdapter) +int et131x_adapter_setup(struct et131x_adapter *etdev) { int status = 0; DBG_ENTER(et131x_dbginfo); /* Configure the JAGCore */ - ConfigGlobalRegs(pAdapter); + ConfigGlobalRegs(etdev); - ConfigMACRegs1(pAdapter); - ConfigMMCRegs(pAdapter); + ConfigMACRegs1(etdev); + ConfigMMCRegs(etdev); - ConfigRxMacRegs(pAdapter); - ConfigTxMacRegs(pAdapter); + ConfigRxMacRegs(etdev); + ConfigTxMacRegs(etdev); - ConfigRxDmaRegs(pAdapter); - ConfigTxDmaRegs(pAdapter); + ConfigRxDmaRegs(etdev); + ConfigTxDmaRegs(etdev); - ConfigMacStatRegs(pAdapter); + ConfigMacStatRegs(etdev); /* Move the following code to Timer function?? */ - status = et131x_xcvr_find(pAdapter); + status = et131x_xcvr_find(etdev); if (status != 0) DBG_WARNING(et131x_dbginfo, "Could not find the xcvr\n"); /* Prepare the TRUEPHY library. */ - ET1310_PhyInit(pAdapter); + ET1310_PhyInit(etdev); /* Reset the phy now so changes take place */ - ET1310_PhyReset(pAdapter); + ET1310_PhyReset(etdev); /* Power down PHY */ - ET1310_PhyPowerDown(pAdapter, 1); + ET1310_PhyPowerDown(etdev, 1); /* * We need to turn off 1000 base half dulplex, the mac does not * support it. For the 10/100 part, turn off all gig advertisement */ - if (pAdapter->DeviceID != ET131X_PCI_DEVICE_ID_FAST) - ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_FULL); + if (etdev->DeviceID != ET131X_PCI_DEVICE_ID_FAST) + ET1310_PhyAdvertise1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_FULL); else - ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); + ET1310_PhyAdvertise1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE); /* Power up PHY */ - ET1310_PhyPowerDown(pAdapter, 0); + ET1310_PhyPowerDown(etdev, 0); - et131x_setphy_normal(pAdapter); + et131x_setphy_normal(etdev); DBG_LEAVE(et131x_dbginfo); return status; diff --git a/drivers/staging/et131x/et131x_isr.c b/drivers/staging/et131x/et131x_isr.c index bbe3c1a..9f51425 100644 --- a/drivers/staging/et131x/et131x_isr.c +++ b/drivers/staging/et131x/et131x_isr.c @@ -211,10 +211,10 @@ out: */ void et131x_isr_handler(struct work_struct *work) { - struct et131x_adapter *pAdapter = + struct et131x_adapter *etdev = container_of(work, struct et131x_adapter, task); - INTERRUPT_t GlobStatus = pAdapter->Stats.InterruptStatus; - ADDRESS_MAP_t __iomem *iomem = pAdapter->CSRAddress; + INTERRUPT_t GlobStatus = etdev->Stats.InterruptStatus; + ADDRESS_MAP_t __iomem *iomem = etdev->CSRAddress; /* * These first two are by far the most common. Once handled, we clear @@ -224,13 +224,13 @@ void et131x_isr_handler(struct work_struct *work) /* Handle all the completed Transmit interrupts */ if (GlobStatus.bits.txdma_isr) { DBG_TX(et131x_dbginfo, "TXDMA_ISR interrupt\n"); - et131x_handle_send_interrupt(pAdapter); + et131x_handle_send_interrupt(etdev); } /* Handle all the completed Receives interrupts */ if (GlobStatus.bits.rxdma_xfr_done) { DBG_RX(et131x_dbginfo, "RXDMA_XFR_DONE interrupt\n"); - et131x_handle_recv_interrupt(pAdapter); + et131x_handle_recv_interrupt(etdev); } GlobStatus.value &= 0xffffffd7; @@ -272,8 +272,8 @@ void et131x_isr_handler(struct work_struct *work) /* If the user has flow control on, then we will * send a pause packet, otherwise just exit */ - if (pAdapter->FlowControl == TxOnly || - pAdapter->FlowControl == Both) { + if (etdev->FlowControl == TxOnly || + etdev->FlowControl == Both) { PM_CSR_t pm_csr; /* Tell the device to send a pause packet via @@ -330,11 +330,11 @@ void et131x_isr_handler(struct work_struct *work) */ /* TRAP();*/ - pAdapter->TxMacTest.value = + etdev->TxMacTest.value = readl(&iomem->txmac.tx_test.value); DBG_WARNING(et131x_dbginfo, "RxDMA_ERR interrupt, error %x\n", - pAdapter->TxMacTest.value); + etdev->TxMacTest.value); } /* Handle the Wake on LAN Event */ @@ -370,23 +370,23 @@ void et131x_isr_handler(struct work_struct *work) DBG_VERBOSE(et131x_dbginfo, "Device is in COMA mode, " "need to wake up\n"); - DisablePhyComa(pAdapter); + DisablePhyComa(etdev); } /* Read the PHY ISR to clear the reason for the * interrupt. */ - MiRead(pAdapter, (uint8_t) offsetof(MI_REGS_t, isr), + MiRead(etdev, (uint8_t) offsetof(MI_REGS_t, isr), &myIsr.value); - if (!pAdapter->ReplicaPhyLoopbk) { - MiRead(pAdapter, + if (!etdev->ReplicaPhyLoopbk) { + MiRead(etdev, (uint8_t) offsetof(MI_REGS_t, bmsr), &BmsrData.value); BmsrInts.value = - pAdapter->Bmsr.value ^ BmsrData.value; - pAdapter->Bmsr.value = BmsrData.value; + etdev->Bmsr.value ^ BmsrData.value; + etdev->Bmsr.value = BmsrData.value; DBG_VERBOSE(et131x_dbginfo, "Bmsr.value = 0x%04x," @@ -394,13 +394,13 @@ void et131x_isr_handler(struct work_struct *work) BmsrData.value, BmsrInts.value); /* Do all the cable in / cable out stuff */ - et131x_Mii_check(pAdapter, BmsrData, BmsrInts); + et131x_Mii_check(etdev, BmsrData, BmsrInts); } } /* Let's move on to the TxMac */ if (GlobStatus.bits.txmac_interrupt) { - pAdapter->TxRing.TxMacErr.value = + etdev->TxRing.TxMacErr.value = readl(&iomem->txmac.err.value); /* @@ -415,7 +415,7 @@ void et131x_isr_handler(struct work_struct *work) */ DBG_WARNING(et131x_dbginfo, "TXMAC interrupt, error 0x%08x\n", - pAdapter->TxRing.TxMacErr.value); + etdev->TxRing.TxMacErr.value); /* If we are debugging, we want to see this error, * otherwise we just want the device to be reset and @@ -432,7 +432,7 @@ void et131x_isr_handler(struct work_struct *work) * set the flag to cause us to reset so we can solve * this issue. */ - /* MP_SET_FLAG( pAdapter, + /* MP_SET_FLAG( etdev, fMP_ADAPTER_HARDWARE_ERROR); */ DBG_WARNING(et131x_dbginfo, @@ -461,7 +461,7 @@ void et131x_isr_handler(struct work_struct *work) * counter(s). */ DBG_VERBOSE(et131x_dbginfo, "MAC_STAT interrupt\n"); - HandleMacStatInterrupt(pAdapter); + HandleMacStatInterrupt(etdev); } /* Handle SLV Timeout Interrupt */ @@ -479,6 +479,6 @@ void et131x_isr_handler(struct work_struct *work) } } - if (pAdapter->PoMgmt.PowerState == NdisDeviceStateD0) - et131x_enable_interrupts(pAdapter); + if (etdev->PoMgmt.PowerState == NdisDeviceStateD0) + et131x_enable_interrupts(etdev); } diff --git a/drivers/staging/et131x/et131x_netdev.c b/drivers/staging/et131x/et131x_netdev.c index 74a8375..77fac95 100644 --- a/drivers/staging/et131x/et131x_netdev.c +++ b/drivers/staging/et131x/et131x_netdev.c @@ -308,7 +308,7 @@ int et131x_close(struct net_device *netdev) int et131x_ioctl_mii(struct net_device *netdev, struct ifreq *reqbuf, int cmd) { int status = 0; - struct et131x_adapter *pAdapter = netdev_priv(netdev); + struct et131x_adapter *etdev = netdev_priv(netdev); struct mii_ioctl_data *data = if_mii(reqbuf); DBG_ENTER(et131x_dbginfo); @@ -316,7 +316,7 @@ int et131x_ioctl_mii(struct net_device *netdev, struct ifreq *reqbuf, int cmd) switch (cmd) { case SIOCGMIIPHY: DBG_VERBOSE(et131x_dbginfo, "SIOCGMIIPHY\n"); - data->phy_id = pAdapter->Stats.xcvr_addr; + data->phy_id = etdev->Stats.xcvr_addr; break; case SIOCGMIIREG: @@ -324,7 +324,7 @@ int et131x_ioctl_mii(struct net_device *netdev, struct ifreq *reqbuf, int cmd) if (!capable(CAP_NET_ADMIN)) { status = -EPERM; } else { - status = MiRead(pAdapter, + status = MiRead(etdev, data->reg_num, &data->val_out); } break; @@ -334,7 +334,7 @@ int et131x_ioctl_mii(struct net_device *netdev, struct ifreq *reqbuf, int cmd) if (!capable(CAP_NET_ADMIN)) { status = -EPERM; } else { - status = MiWrite(pAdapter, data->reg_num, + status = MiWrite(etdev, data->reg_num, data->val_in); } break; @@ -608,14 +608,14 @@ int et131x_tx(struct sk_buff *skb, struct net_device *netdev) */ void et131x_tx_timeout(struct net_device *netdev) { - struct et131x_adapter *pAdapter = netdev_priv(netdev); + struct et131x_adapter *etdev = netdev_priv(netdev); PMP_TCB pMpTcb; unsigned long lockflags; DBG_WARNING(et131x_dbginfo, "TX TIMEOUT\n"); /* Just skip this part if the adapter is doing link detection */ - if (MP_TEST_FLAG(pAdapter, fMP_ADAPTER_LINK_DETECTION)) { + if (MP_TEST_FLAG(etdev, fMP_ADAPTER_LINK_DETECTION)) { DBG_ERROR(et131x_dbginfo, "Still doing link detection\n"); return; } @@ -623,21 +623,21 @@ void et131x_tx_timeout(struct net_device *netdev) /* Any nonrecoverable hardware error? * Checks adapter->flags for any failure in phy reading */ - if (MP_TEST_FLAG(pAdapter, fMP_ADAPTER_NON_RECOVER_ERROR)) { + if (MP_TEST_FLAG(etdev, fMP_ADAPTER_NON_RECOVER_ERROR)) { DBG_WARNING(et131x_dbginfo, "Non recoverable error - remove\n"); return; } /* Hardware failure? */ - if (MP_TEST_FLAG(pAdapter, fMP_ADAPTER_HARDWARE_ERROR)) { + if (MP_TEST_FLAG(etdev, fMP_ADAPTER_HARDWARE_ERROR)) { DBG_WARNING(et131x_dbginfo, "hardware error - reset\n"); return; } /* Is send stuck? */ - spin_lock_irqsave(&pAdapter->TCBSendQLock, lockflags); + spin_lock_irqsave(&etdev->TCBSendQLock, lockflags); - pMpTcb = pAdapter->TxRing.CurrSendHead; + pMpTcb = etdev->TxRing.CurrSendHead; if (pMpTcb != NULL) { pMpTcb->Count++; @@ -645,21 +645,21 @@ void et131x_tx_timeout(struct net_device *netdev) if (pMpTcb->Count > NIC_SEND_HANG_THRESHOLD) { #ifdef CONFIG_ET131X_DEBUG TX_STATUS_BLOCK_t txDmaComplete = - *(pAdapter->TxRing.pTxStatusVa); + *(etdev->TxRing.pTxStatusVa); PTX_DESC_ENTRY_t pDesc = - pAdapter->TxRing.pTxDescRingVa + + etdev->TxRing.pTxDescRingVa + pMpTcb->WrIndex.bits.val; #endif TX_DESC_ENTRY_t StuckDescriptors[10]; if (pMpTcb->WrIndex.bits.val > 7) { memcpy(StuckDescriptors, - pAdapter->TxRing.pTxDescRingVa + + etdev->TxRing.pTxDescRingVa + pMpTcb->WrIndex.bits.val - 6, sizeof(TX_DESC_ENTRY_t) * 10); } - spin_unlock_irqrestore(&pAdapter->TCBSendQLock, + spin_unlock_irqrestore(&etdev->TCBSendQLock, lockflags); DBG_WARNING(et131x_dbginfo, @@ -677,10 +677,10 @@ void et131x_tx_timeout(struct net_device *netdev) "WbStatus 0x%08x\n", txDmaComplete.value); #ifdef CONFIG_ET131X_DEBUG - DumpDeviceBlock(DBG_WARNING_ON, pAdapter, 0); - DumpDeviceBlock(DBG_WARNING_ON, pAdapter, 1); - DumpDeviceBlock(DBG_WARNING_ON, pAdapter, 3); - DumpDeviceBlock(DBG_WARNING_ON, pAdapter, 5); + DumpDeviceBlock(DBG_WARNING_ON, etdev, 0); + DumpDeviceBlock(DBG_WARNING_ON, etdev, 1); + DumpDeviceBlock(DBG_WARNING_ON, etdev, 3); + DumpDeviceBlock(DBG_WARNING_ON, etdev, 5); #endif et131x_close(netdev); et131x_open(netdev); @@ -689,7 +689,7 @@ void et131x_tx_timeout(struct net_device *netdev) } } - spin_unlock_irqrestore(&pAdapter->TCBSendQLock, lockflags); + spin_unlock_irqrestore(&etdev->TCBSendQLock, lockflags); } /** |