summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorJames Bottomley <James.Bottomley@steeleye.com>2007-09-22 08:40:09 -0500
committerJames Bottomley <jejb@mulgrave.localdomain>2007-09-22 08:52:12 -0500
commit2302827c95fe0f441025acd5133e532d2eef322b (patch)
treea83d7deb859acfbe237b7677be96e68befa722a5 /drivers
parentda8f153e51290e7438ba7da66234a864e5d3e1c1 (diff)
downloadop-kernel-dev-2302827c95fe0f441025acd5133e532d2eef322b.zip
op-kernel-dev-2302827c95fe0f441025acd5133e532d2eef322b.tar.gz
[SCSI] scsi_transport_spi: fix domain validation failure from incorrect width setting
Domain Validation in the SPI transport class is failing on boxes with damaged cables (and failing to the extent that the box hangs). The problem is that the first test it does is a cable integrity test for wide transfers and if this fails, it turns the wide bit off. The problem is that the next set of tests it does turns wide back on again, with the result that it runs through the entirety of DV with a known bad setting and then hangs the system. The attached patch fixes the problem by physically nailing the wide setting to what it deduces it should be for the whole of Domain Validation. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/scsi/scsi_transport_spi.c28
1 files changed, 22 insertions, 6 deletions
diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c
index 6f56f87..4df21c9 100644
--- a/drivers/scsi/scsi_transport_spi.c
+++ b/drivers/scsi/scsi_transport_spi.c
@@ -787,10 +787,12 @@ spi_dv_device_internal(struct scsi_device *sdev, u8 *buffer)
struct scsi_target *starget = sdev->sdev_target;
struct Scsi_Host *shost = sdev->host;
int len = sdev->inquiry_len;
+ int min_period = spi_min_period(starget);
+ int max_width = spi_max_width(starget);
/* first set us up for narrow async */
DV_SET(offset, 0);
DV_SET(width, 0);
-
+
if (spi_dv_device_compare_inquiry(sdev, buffer, buffer, DV_LOOPS)
!= SPI_COMPARE_SUCCESS) {
starget_printk(KERN_ERR, starget, "Domain Validation Initial Inquiry Failed\n");
@@ -798,9 +800,13 @@ spi_dv_device_internal(struct scsi_device *sdev, u8 *buffer)
return;
}
+ if (!scsi_device_wide(sdev)) {
+ spi_max_width(starget) = 0;
+ max_width = 0;
+ }
+
/* test width */
- if (i->f->set_width && spi_max_width(starget) &&
- scsi_device_wide(sdev)) {
+ if (i->f->set_width && max_width) {
i->f->set_width(starget, 1);
if (spi_dv_device_compare_inquiry(sdev, buffer,
@@ -809,6 +815,11 @@ spi_dv_device_internal(struct scsi_device *sdev, u8 *buffer)
!= SPI_COMPARE_SUCCESS) {
starget_printk(KERN_ERR, starget, "Wide Transfers Fail\n");
i->f->set_width(starget, 0);
+ /* Make sure we don't force wide back on by asking
+ * for a transfer period that requires it */
+ max_width = 0;
+ if (min_period < 10)
+ min_period = 10;
}
}
@@ -828,7 +839,8 @@ spi_dv_device_internal(struct scsi_device *sdev, u8 *buffer)
/* now set up to the maximum */
DV_SET(offset, spi_max_offset(starget));
- DV_SET(period, spi_min_period(starget));
+ DV_SET(period, min_period);
+
/* try QAS requests; this should be harmless to set if the
* target supports it */
if (scsi_device_qas(sdev)) {
@@ -837,14 +849,14 @@ spi_dv_device_internal(struct scsi_device *sdev, u8 *buffer)
DV_SET(qas, 0);
}
- if (scsi_device_ius(sdev) && spi_min_period(starget) < 9) {
+ if (scsi_device_ius(sdev) && min_period < 9) {
/* This u320 (or u640). Set IU transfers */
DV_SET(iu, 1);
/* Then set the optional parameters */
DV_SET(rd_strm, 1);
DV_SET(wr_flow, 1);
DV_SET(rti, 1);
- if (spi_min_period(starget) == 8)
+ if (min_period == 8)
DV_SET(pcomp_en, 1);
} else {
DV_SET(iu, 0);
@@ -862,6 +874,10 @@ spi_dv_device_internal(struct scsi_device *sdev, u8 *buffer)
} else {
DV_SET(dt, 1);
}
+ /* set width last because it will pull all the other
+ * parameters down to required values */
+ DV_SET(width, max_width);
+
/* Do the read only INQUIRY tests */
spi_dv_retrain(sdev, buffer, buffer + sdev->inquiry_len,
spi_dv_device_compare_inquiry);
OpenPOWER on IntegriCloud