summaryrefslogtreecommitdiffstats
path: root/drivers/video
diff options
context:
space:
mode:
authorRichard Purdie <rpurdie@rpsys.net>2006-06-26 00:26:27 -0700
committerLinus Torvalds <torvalds@g5.osdl.org>2006-06-26 09:58:28 -0700
commite4423781850025726b6c4e24ba3d93c7ff9cd826 (patch)
treea154cdf7a39e0554177cd096758f28efcc24c1e1 /drivers/video
parentf8020dc560fde089becc05de1d0ada1f7f46dc51 (diff)
downloadop-kernel-dev-e4423781850025726b6c4e24ba3d93c7ff9cd826.zip
op-kernel-dev-e4423781850025726b6c4e24ba3d93c7ff9cd826.tar.gz
[PATCH] backlight: LOCOMO Backlight Driver updates
Add backlight intensity control to the LOCOMO lcd/backlight driver using the backlight class and add basic power management support. This is a reimplementation and improvement of patches by John Lenz and Pavel Machek Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Antonino Daplas <adaplas@pol.net> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Diffstat (limited to 'drivers/video')
-rw-r--r--drivers/video/backlight/Kconfig8
-rw-r--r--drivers/video/backlight/Makefile2
-rw-r--r--drivers/video/backlight/locomolcd.c123
3 files changed, 116 insertions, 17 deletions
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index b895eaa..02f1529 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -50,6 +50,14 @@ config BACKLIGHT_CORGI
If you have a Sharp Zaurus SL-C7xx, SL-Cxx00 or SL-6000x say y to enable the
backlight driver.
+config BACKLIGHT_LOCOMO
+ tristate "Sharp LOCOMO LCD/Backlight Driver"
+ depends on BACKLIGHT_DEVICE && SHARP_LOCOMO
+ default y
+ help
+ If you have a Sharp Zaurus SL-5500 (Collie) or SL-5600 (Poodle) say y to
+ enable the LCD/backlight driver.
+
config BACKLIGHT_HP680
tristate "HP Jornada 680 Backlight Driver"
depends on BACKLIGHT_DEVICE && SH_HP6XX
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index 744210c..65e5553 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -4,4 +4,4 @@ obj-$(CONFIG_LCD_CLASS_DEVICE) += lcd.o
obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
obj-$(CONFIG_BACKLIGHT_CORGI) += corgi_bl.o
obj-$(CONFIG_BACKLIGHT_HP680) += hp680_bl.o
-obj-$(CONFIG_SHARP_LOCOMO) += locomolcd.o
+obj-$(CONFIG_BACKLIGHT_LOCOMO) += locomolcd.o
diff --git a/drivers/video/backlight/locomolcd.c b/drivers/video/backlight/locomolcd.c
index 60831bb..bd879b7 100644
--- a/drivers/video/backlight/locomolcd.c
+++ b/drivers/video/backlight/locomolcd.c
@@ -17,6 +17,8 @@
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/backlight.h>
#include <asm/hardware/locomo.h>
#include <asm/irq.h>
@@ -25,7 +27,10 @@
#include "../../../arch/arm/mach-sa1100/generic.h"
+static struct backlight_device *locomolcd_bl_device;
static struct locomo_dev *locomolcd_dev;
+static unsigned long locomolcd_flags;
+#define LOCOMOLCD_SUSPENDED 0x01
static void locomolcd_on(int comadj)
{
@@ -89,12 +94,10 @@ void locomolcd_power(int on)
}
/* read comadj */
- if (comadj == -1) {
- if (machine_is_poodle())
- comadj = 118;
- if (machine_is_collie())
- comadj = 128;
- }
+ if (comadj == -1 && machine_is_collie())
+ comadj = 128;
+ if (comadj == -1 && machine_is_poodle())
+ comadj = 118;
if (on)
locomolcd_on(comadj);
@@ -105,26 +108,100 @@ void locomolcd_power(int on)
}
EXPORT_SYMBOL(locomolcd_power);
-static int poodle_lcd_probe(struct locomo_dev *dev)
+
+static int current_intensity;
+
+static int locomolcd_set_intensity(struct backlight_device *bd)
+{
+ int intensity = bd->props->brightness;
+
+ if (bd->props->power != FB_BLANK_UNBLANK)
+ intensity = 0;
+ if (bd->props->fb_blank != FB_BLANK_UNBLANK)
+ intensity = 0;
+ if (locomolcd_flags & LOCOMOLCD_SUSPENDED)
+ intensity = 0;
+
+ switch (intensity) {
+ /* AC and non-AC are handled differently, but produce same results in sharp code? */
+ case 0: locomo_frontlight_set(locomolcd_dev, 0, 0, 161); break;
+ case 1: locomo_frontlight_set(locomolcd_dev, 117, 0, 161); break;
+ case 2: locomo_frontlight_set(locomolcd_dev, 163, 0, 148); break;
+ case 3: locomo_frontlight_set(locomolcd_dev, 194, 0, 161); break;
+ case 4: locomo_frontlight_set(locomolcd_dev, 194, 1, 161); break;
+
+ default:
+ return -ENODEV;
+ }
+ current_intensity = intensity;
+ return 0;
+}
+
+static int locomolcd_get_intensity(struct backlight_device *bd)
+{
+ return current_intensity;
+}
+
+static struct backlight_properties locomobl_data = {
+ .owner = THIS_MODULE,
+ .get_brightness = locomolcd_get_intensity,
+ .update_status = locomolcd_set_intensity,
+ .max_brightness = 4,
+};
+
+#ifdef CONFIG_PM
+static int locomolcd_suspend(struct locomo_dev *dev, pm_message_t state)
+{
+ locomolcd_flags |= LOCOMOLCD_SUSPENDED;
+ locomolcd_set_intensity(locomolcd_bl_device);
+ return 0;
+}
+
+static int locomolcd_resume(struct locomo_dev *dev)
+{
+ locomolcd_flags &= ~LOCOMOLCD_SUSPENDED;
+ locomolcd_set_intensity(locomolcd_bl_device);
+ return 0;
+}
+#else
+#define locomolcd_suspend NULL
+#define locomolcd_resume NULL
+#endif
+
+static int locomolcd_probe(struct locomo_dev *dev)
{
unsigned long flags;
local_irq_save(flags);
locomolcd_dev = dev;
+ locomo_gpio_set_dir(dev, LOCOMO_GPIO_FL_VR, 0);
+
/* the poodle_lcd_power function is called for the first time
* from fs_initcall, which is before locomo is activated.
* We need to recall poodle_lcd_power here*/
-#ifdef CONFIG_MACH_POODLE
- locomolcd_power(1);
-#endif
+ if (machine_is_poodle())
+ locomolcd_power(1);
+
local_irq_restore(flags);
+
+ locomolcd_bl_device = backlight_device_register("locomo-bl", NULL, &locomobl_data);
+
+ if (IS_ERR (locomolcd_bl_device))
+ return PTR_ERR (locomolcd_bl_device);
+
+ /* Set up frontlight so that screen is readable */
+ locomobl_data.brightness = 2;
+ locomolcd_set_intensity(locomolcd_bl_device);
+
return 0;
}
-static int poodle_lcd_remove(struct locomo_dev *dev)
+static int locomolcd_remove(struct locomo_dev *dev)
{
unsigned long flags;
+
+ backlight_device_unregister(locomolcd_bl_device);
local_irq_save(flags);
locomolcd_dev = NULL;
local_irq_restore(flags);
@@ -136,19 +213,33 @@ static struct locomo_driver poodle_lcd_driver = {
.name = "locomo-backlight",
},
.devid = LOCOMO_DEVID_BACKLIGHT,
- .probe = poodle_lcd_probe,
- .remove = poodle_lcd_remove,
+ .probe = locomolcd_probe,
+ .remove = locomolcd_remove,
+ .suspend = locomolcd_suspend,
+ .resume = locomolcd_resume,
};
-static int __init poodle_lcd_init(void)
+
+static int __init locomolcd_init(void)
{
int ret = locomo_driver_register(&poodle_lcd_driver);
- if (ret) return ret;
+ if (ret)
+ return ret;
#ifdef CONFIG_SA1100_COLLIE
sa1100fb_lcd_power = locomolcd_power;
#endif
return 0;
}
-device_initcall(poodle_lcd_init);
+static void __exit locomolcd_exit(void)
+{
+ locomo_driver_unregister(&poodle_lcd_driver);
+}
+
+module_init(locomolcd_init);
+module_exit(locomolcd_exit);
+
+MODULE_AUTHOR("John Lenz <lenz@cs.wisc.edu>, Pavel Machek <pavel@suse.cz>");
+MODULE_DESCRIPTION("Collie LCD driver");
+MODULE_LICENSE("GPL");
OpenPOWER on IntegriCloud