[PATCH] w100fb: Rewrite for platform independence

The code w100fb was based on was horribly Sharp SL-C7x0 specific and there
was little else that could be done as I had no access to anything else with
a w100 in it.  There is no real documentation about this chipset available.

Ian Molton has access to other platforms with the w100 (Toshiba e-series)
and so between us, we've improved w100fb and made it platform independent.
Ian Molton also added support for the very similar w3220 and w3200
chipsets.

There are a lot of changes here and it nearly amounts to a rewrite of the
driver but it has been extensively tested and is being used in preference
to the original driver in the Zaurus community.  I'd therefore like to
update the mainline code to reflect this.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Acked-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 758 insertions, 1154 deletions

diff --git a/drivers/video/w100fb.c b/drivers/video/w100fb.c
index adcda69..0030c07 100644
--- a/drivers/video/w100fb.c
+++ b/drivers/video/w100fb.c
@@ -5,9 +5,15 @@
  *
  * Copyright (C) 2002, ATI Corp.
  * Copyright (C) 2004-2005 Richard Purdie
+ * Copyright (c) 2005 Ian Molton
  *
  * Rewritten for 2.6 by Richard Purdie <rpurdie@rpsys.net>
  *
+ * Generic platform support by Ian Molton <spyro@f2s.com>
+ * and Richard Purdie <rpurdie@rpsys.net>
+ *
+ * w32xx support by Ian Molton
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -21,7 +27,7 @@
 #include <linux/mm.h>
 #include <linux/device.h>
 #include <linux/string.h>
-#include <linux/proc_fs.h>
+#include <linux/vmalloc.h>
 #include <asm/io.h>
 #include <asm/uaccess.h>
 #include <video/w100fb.h>
@@ -30,114 +36,78 @@
 /*
  * Prototypes
  */
-static void w100fb_save_buffer(void);
-static void w100fb_clear_buffer(void);
-static void w100fb_restore_buffer(void);
-static void w100fb_clear_screen(u32 mode, long int offset);
-static void w100_resume(void);
 static void w100_suspend(u32 mode);
-static void w100_init_qvga_rotation(u16 deg);
-static void w100_init_vga_rotation(u16 deg);
 static void w100_vsync(void);
-static void w100_init_sharp_lcd(u32 mode);
-static void w100_pwm_setup(void);
-static void w100_InitExtMem(u32 mode);
-static void w100_hw_init(void);
-static u16 w100_set_fastsysclk(u16 Freq);
-
-static void lcdtg_hw_init(u32 mode);
-static void lcdtg_lcd_change(u32 mode);
-static void lcdtg_resume(void);
-static void lcdtg_suspend(void);
-
-
-/* Register offsets & lengths */
-#define REMAPPED_FB_LEN   0x15ffff
-
-#define BITS_PER_PIXEL    16
+static void w100_hw_init(struct w100fb_par*);
+static void w100_pwm_setup(struct w100fb_par*);
+static void w100_init_clocks(struct w100fb_par*);
+static void w100_setup_memory(struct w100fb_par*);
+static void w100_init_lcd(struct w100fb_par*);
+static void w100_set_dispregs(struct w100fb_par*);
+static void w100_update_enable(void);
+static void w100_update_disable(void);
+static void calc_hsync(struct w100fb_par *par);
+struct w100_pll_info *w100_get_xtal_table(unsigned int freq);
 
 /* Pseudo palette size */
 #define MAX_PALETTES      16
 
-/* for resolution change */
-#define LCD_MODE_INIT (-1)
-#define LCD_MODE_480    0
-#define LCD_MODE_320    1
-#define LCD_MODE_240    2
-#define LCD_MODE_640    3
-
-#define LCD_SHARP_QVGA 0
-#define LCD_SHARP_VGA  1
-
-#define LCD_MODE_PORTRAIT	0
-#define LCD_MODE_LANDSCAPE	1
-
 #define W100_SUSPEND_EXTMEM 0
 #define W100_SUSPEND_ALL    1
 
-/* General frame buffer data structures */
-struct w100fb_par {
-	u32 xres;
-	u32 yres;
-	int fastsysclk_mode;
-	int lcdMode;
-	int rotation_flag;
-	int blanking_flag;
-	int comadj;
-	int phadadj;
-};
-
-static struct w100fb_par *current_par;
+#define BITS_PER_PIXEL    16
 
 /* Remapped addresses for base cfg, memmapped regs and the frame buffer itself */
 static void *remapped_base;
 static void *remapped_regs;
 static void *remapped_fbuf;
 
-/* External Function */
-static void(*w100fb_ssp_send)(u8 adrs, u8 data);
+#define REMAPPED_FB_LEN   0x15ffff
+
+/* This is the offset in the w100's address space we map the current
+   framebuffer memory to. We use the position of external memory as
+   we can remap internal memory to there if external isn't present. */
+#define W100_FB_BASE MEM_EXT_BASE_VALUE
+
 
 /*
  * Sysfs functions
  */
-
-static ssize_t rotation_show(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t flip_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct fb_info *info = dev_get_drvdata(dev);
 	struct w100fb_par *par=info->par;
 
-	return sprintf(buf, "%d\n",par->rotation_flag);
+	return sprintf(buf, "%d\n",par->flip);
 }
 
-static ssize_t rotation_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+static ssize_t flip_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
 {
-	unsigned int rotate;
+	unsigned int flip;
 	struct fb_info *info = dev_get_drvdata(dev);
 	struct w100fb_par *par=info->par;
 
-	rotate = simple_strtoul(buf, NULL, 10);
+	flip = simple_strtoul(buf, NULL, 10);
+
+	if (flip > 0)
+		par->flip = 1;
+	else
+		par->flip = 0;
 
-	if (rotate > 0) par->rotation_flag = 1;
-	else par->rotation_flag = 0;
+	w100_update_disable();
+	w100_set_dispregs(par);
+	w100_update_enable();
 
-	if (par->lcdMode == LCD_MODE_320)
-		w100_init_qvga_rotation(par->rotation_flag ? 270 : 90);
-	else if (par->lcdMode == LCD_MODE_240)
-		w100_init_qvga_rotation(par->rotation_flag ? 180 : 0);
-	else if (par->lcdMode == LCD_MODE_640)
-		w100_init_vga_rotation(par->rotation_flag ? 270 : 90);
-	else if (par->lcdMode == LCD_MODE_480)
-		w100_init_vga_rotation(par->rotation_flag ? 180 : 0);
+	calc_hsync(par);
 
 	return count;
 }
 
-static DEVICE_ATTR(rotation, 0644, rotation_show, rotation_store);
+static DEVICE_ATTR(flip, 0644, flip_show, flip_store);
 
 static ssize_t w100fb_reg_read(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
 {
-	unsigned long param;
-	unsigned long regs;
+	unsigned long regs, param;
 	regs = simple_strtoul(buf, NULL, 16);
 	param = readl(remapped_regs + regs);
 	printk("Read Register 0x%08lX: 0x%08lX\n", regs, param);
@@ -148,8 +118,7 @@ static DEVICE_ATTR(reg_read, 0200, NULL, w100fb_reg_read);
 
 static ssize_t w100fb_reg_write(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
 {
-	unsigned long regs;
-	unsigned long param;
+	unsigned long regs, param;
 	sscanf(buf, "%lx %lx", &regs, &param);
 
 	if (regs <= 0x2000) {
@@ -163,54 +132,56 @@ static ssize_t w100fb_reg_write(struct device *dev, struct device_attribute *att
 static DEVICE_ATTR(reg_write, 0200, NULL, w100fb_reg_write);
 
 
-static ssize_t fastsysclk_show(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t fastpllclk_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct fb_info *info = dev_get_drvdata(dev);
 	struct w100fb_par *par=info->par;
 
-	return sprintf(buf, "%d\n",par->fastsysclk_mode);
+	return sprintf(buf, "%d\n",par->fastpll_mode);
 }
 
-static ssize_t fastsysclk_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+static ssize_t fastpllclk_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
 {
-	int param;
 	struct fb_info *info = dev_get_drvdata(dev);
 	struct w100fb_par *par=info->par;
 
-	param = simple_strtoul(buf, NULL, 10);
-
-	if (param == 75) {
-		printk("Set fastsysclk %d\n", param);
-		par->fastsysclk_mode = param;
-		w100_set_fastsysclk(par->fastsysclk_mode);
-	} else if (param == 100) {
-		printk("Set fastsysclk %d\n", param);
-		par->fastsysclk_mode = param;
-		w100_set_fastsysclk(par->fastsysclk_mode);
+	if (simple_strtoul(buf, NULL, 10) > 0) {
+		par->fastpll_mode=1;
+		printk("w100fb: Using fast system clock (if possible)\n");
+	} else {
+		par->fastpll_mode=0;
+		printk("w100fb: Using normal system clock\n");
 	}
+
+	w100_init_clocks(par);
+	calc_hsync(par);
+
 	return count;
 }
 
-static DEVICE_ATTR(fastsysclk, 0644, fastsysclk_show, fastsysclk_store);
+static DEVICE_ATTR(fastpllclk, 0644, fastpllclk_show, fastpllclk_store);
 
 /*
- * The touchscreen on this device needs certain information
- * from the video driver to function correctly. We export it here.
+ * Some touchscreens need hsync information from the video driver to
+ * function correctly. We export it here.
  */
-int w100fb_get_xres(void) {
-	return current_par->xres;
-}
+unsigned long w100fb_get_hsynclen(struct device *dev)
+{
+	struct fb_info *info = dev_get_drvdata(dev);
+	struct w100fb_par *par=info->par;
 
-int w100fb_get_blanking(void) {
-	return current_par->blanking_flag;
+	/* If display is blanked/suspended, hsync isn't active */
+	if (par->blanked)
+		return 0;
+	else
+		return par->hsync_len;
 }
+EXPORT_SYMBOL(w100fb_get_hsynclen);
 
-int w100fb_get_fastsysclk(void) {
-	return current_par->fastsysclk_mode;
+static void w100fb_clear_screen(struct w100fb_par *par)
+{
+	memset_io(remapped_fbuf + (W100_FB_BASE-MEM_WINDOW_BASE), 0, (par->xres * par->yres * BITS_PER_PIXEL/8));
 }
-EXPORT_SYMBOL(w100fb_get_xres);
-EXPORT_SYMBOL(w100fb_get_blanking);
-EXPORT_SYMBOL(w100fb_get_fastsysclk);
 
 
 /*
@@ -234,7 +205,6 @@ static int w100fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
 	 * according to the RGB bitfield information.
 	 */
 	if (regno < MAX_PALETTES) {
-
 		u32 *pal = info->pseudo_palette;
 
 		val = (red & 0xf800) | ((green & 0xfc00) >> 5) | ((blue & 0xf800) >> 11);
@@ -250,115 +220,90 @@ static int w100fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
  */
 static int w100fb_blank(int blank_mode, struct fb_info *info)
 {
-	struct w100fb_par *par;
-	par=info->par;
+	struct w100fb_par *par = info->par;
+	struct w100_tg_info *tg = par->mach->tg;
 
 	switch(blank_mode) {
 
- 	case FB_BLANK_NORMAL: /* Normal blanking */
-	case FB_BLANK_VSYNC_SUSPEND: /* VESA blank (vsync off) */
-	case FB_BLANK_HSYNC_SUSPEND: /* VESA blank (hsync off) */
- 	case FB_BLANK_POWERDOWN: /* Poweroff */
-  		if (par->blanking_flag == 0) {
-			w100fb_save_buffer();
-			lcdtg_suspend();
-			par->blanking_flag = 1;
+ 	case FB_BLANK_NORMAL:         /* Normal blanking */
+	case FB_BLANK_VSYNC_SUSPEND:  /* VESA blank (vsync off) */
+	case FB_BLANK_HSYNC_SUSPEND:  /* VESA blank (hsync off) */
+ 	case FB_BLANK_POWERDOWN:      /* Poweroff */
+  		if (par->blanked == 0) {
+			if(tg && tg->suspend)
+				tg->suspend(par);
+			par->blanked = 1;
   		}
   		break;
 
  	case FB_BLANK_UNBLANK: /* Unblanking */
-  		if (par->blanking_flag != 0) {
-			w100fb_restore_buffer();
-			lcdtg_resume();
-			par->blanking_flag = 0;
+  		if (par->blanked != 0) {
+			if(tg && tg->resume)
+				tg->resume(par);
+			par->blanked = 0;
   		}
   		break;
  	}
 	return 0;
 }
 
+
 /*
  *  Change the resolution by calling the appropriate hardware functions
  */
-static void w100fb_changeres(int rotate_mode, u32 mode)
+static void w100fb_activate_var(struct w100fb_par *par)
 {
-	u16 rotation=0;
-
-	switch(rotate_mode) {
-	case LCD_MODE_LANDSCAPE:
-		rotation=(current_par->rotation_flag ? 270 : 90);
-		break;
-	case LCD_MODE_PORTRAIT:
-		rotation=(current_par->rotation_flag ? 180 : 0);
-		break;
-	}
+	struct w100_tg_info *tg = par->mach->tg;
 
-	w100_pwm_setup();
-	switch(mode) {
-	case LCD_SHARP_QVGA:
-		w100_vsync();
-		w100_suspend(W100_SUSPEND_EXTMEM);
-		w100_init_sharp_lcd(LCD_SHARP_QVGA);
-		w100_init_qvga_rotation(rotation);
-		w100_InitExtMem(LCD_SHARP_QVGA);
-		w100fb_clear_screen(LCD_SHARP_QVGA, 0);
-		lcdtg_lcd_change(LCD_SHARP_QVGA);
-		break;
-	case LCD_SHARP_VGA:
-		w100fb_clear_screen(LCD_SHARP_QVGA, 0);
-		writel(0xBFFFA000, remapped_regs + mmMC_EXT_MEM_LOCATION);
-		w100_InitExtMem(LCD_SHARP_VGA);
-		w100fb_clear_screen(LCD_SHARP_VGA, 0x200000);
-		w100_vsync();
-		w100_init_sharp_lcd(LCD_SHARP_VGA);
-		if (rotation != 0)
-			w100_init_vga_rotation(rotation);
-		lcdtg_lcd_change(LCD_SHARP_VGA);
-		break;
-	}
+	w100_pwm_setup(par);
+	w100_setup_memory(par);
+	w100_init_clocks(par);
+	w100fb_clear_screen(par);
+	w100_vsync();
+
+	w100_update_disable();
+	w100_init_lcd(par);
+	w100_set_dispregs(par);
+	w100_update_enable();
+
+	calc_hsync(par);
+
+	if (!par->blanked && tg && tg->change)
+		tg->change(par);
 }
 
-/*
- * Set up the display for the fb subsystem
+
+/* Select the smallest mode that allows the desired resolution to be
+ * displayed. If desired, the x and y parameters can be rounded up to
+ * match the selected mode.
  */
-static void w100fb_activate_var(struct fb_info *info)
+static struct w100_mode *w100fb_get_mode(struct w100fb_par *par, unsigned int *x, unsigned int *y, int saveval)
 {
-	u32 temp32;
-	struct w100fb_par *par=info->par;
-	struct fb_var_screeninfo *var = &info->var;
+	struct w100_mode *mode = NULL;
+	struct w100_mode *modelist = par->mach->modelist;
+	unsigned int best_x = 0xffffffff, best_y = 0xffffffff;
+	unsigned int i;
+
+	for (i = 0 ; i < par->mach->num_modes ; i++) {
+		if (modelist[i].xres >= *x && modelist[i].yres >= *y &&
+				modelist[i].xres < best_x && modelist[i].yres < best_y) {
+			best_x = modelist[i].xres;
+			best_y = modelist[i].yres;
+			mode = &modelist[i];
+		} else if(modelist[i].xres >= *y && modelist[i].yres >= *x &&
+		        modelist[i].xres < best_y && modelist[i].yres < best_x) {
+			best_x = modelist[i].yres;
+			best_y = modelist[i].xres;
+			mode = &modelist[i];
+		}
+	}
 
-	/* Set the hardware to 565 */
-	temp32 = readl(remapped_regs + mmDISP_DEBUG2);
-	temp32 &= 0xff7fffff;
-	temp32 |= 0x00800000;
-	writel(temp32, remapped_regs + mmDISP_DEBUG2);
+	if (mode && saveval) {
+		*x = best_x;
+		*y = best_y;
+	}
 
-	if (par->lcdMode == LCD_MODE_INIT) {
-		w100_init_sharp_lcd(LCD_SHARP_VGA);
-		w100_init_vga_rotation(par->rotation_flag ? 270 : 90);
-		par->lcdMode = LCD_MODE_640;
-		lcdtg_hw_init(LCD_SHARP_VGA);
-	} else if (var->xres == 320 && var->yres == 240) {
-		if (par->lcdMode != LCD_MODE_320) {
-			w100fb_changeres(LCD_MODE_LANDSCAPE, LCD_SHARP_QVGA);
-			par->lcdMode = LCD_MODE_320;
-		}
-	} else if (var->xres == 240 && var->yres == 320) {
-		if (par->lcdMode != LCD_MODE_240) {
-			w100fb_changeres(LCD_MODE_PORTRAIT, LCD_SHARP_QVGA);
-			par->lcdMode = LCD_MODE_240;
-		}
-	} else if (var->xres == 640 && var->yres == 480) {
-		if (par->lcdMode != LCD_MODE_640) {
-			w100fb_changeres(LCD_MODE_LANDSCAPE, LCD_SHARP_VGA);
-			par->lcdMode = LCD_MODE_640;
-		}
-	} else if (var->xres == 480 && var->yres == 640) {
-		if (par->lcdMode != LCD_MODE_480) {
-			w100fb_changeres(LCD_MODE_PORTRAIT, LCD_SHARP_VGA);
-			par->lcdMode = LCD_MODE_480;
-		}
-	} else printk(KERN_ERR "W100FB: Resolution error!\n");
+	return mode;
 }
 
 
@@ -366,31 +311,19 @@ static void w100fb_activate_var(struct fb_info *info)
  *  w100fb_check_var():
  *  Get the video params out of 'var'. If a value doesn't fit, round it up,
  *  if it's too big, return -EINVAL.
- *
  */
 static int w100fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 {
-	if (var->xres < var->yres) { /* Portrait mode */
-		if ((var->xres > 480) || (var->yres > 640)) {
-			return -EINVAL;
-		} else if ((var->xres > 240) || (var->yres > 320)) {
-			var->xres = 480;
-			var->yres = 640;
-		} else {
-			var->xres = 240;
-			var->yres = 320;
-		}
-	} else { /* Landscape mode */
-		if ((var->xres > 640) || (var->yres > 480)) {
-			return -EINVAL;
-		} else if ((var->xres > 320) || (var->yres > 240)) {
-			var->xres = 640;
-			var->yres = 480;
-		} else {
-			var->xres = 320;
-			var->yres = 240;
-		}
-	}
+	struct w100fb_par *par=info->par;
+
+	if(!w100fb_get_mode(par, &var->xres, &var->yres, 1))
+		return -EINVAL;
+
+	if (par->mach->mem && ((var->xres*var->yres*BITS_PER_PIXEL/8) > (par->mach->mem->size+1)))
+		return -EINVAL;
+
+	if (!par->mach->mem && ((var->xres*var->yres*BITS_PER_PIXEL/8) > (MEM_INT_SIZE+1)))
+		return -EINVAL;
 
 	var->xres_virtual = max(var->xres_virtual, var->xres);
 	var->yres_virtual = max(var->yres_virtual, var->yres);
@@ -409,13 +342,11 @@ static int w100fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 	var->transp.offset = var->transp.length = 0;
 
 	var->nonstd = 0;
-
 	var->height = -1;
 	var->width = -1;
 	var->vmode = FB_VMODE_NONINTERLACED;
-
 	var->sync = 0;
-	var->pixclock = 0x04;	/* 171521; */
+	var->pixclock = 0x04;  /* 171521; */
 
 	return 0;
 }
@@ -430,274 +361,286 @@ static int w100fb_set_par(struct fb_info *info)
 {
 	struct w100fb_par *par=info->par;
 
-	par->xres = info->var.xres;
-	par->yres = info->var.yres;
-
-	info->fix.visual = FB_VISUAL_TRUECOLOR;
-
-	info->fix.ypanstep = 0;
-	info->fix.ywrapstep = 0;
+	if (par->xres != info->var.xres || par->yres != info->var.yres)	{
+		par->xres = info->var.xres;
+		par->yres = info->var.yres;
+		par->mode = w100fb_get_mode(par, &par->xres, &par->yres, 0);
 
-	if (par->blanking_flag)
-		w100fb_clear_buffer();
+		info->fix.visual = FB_VISUAL_TRUECOLOR;
+		info->fix.ypanstep = 0;
+		info->fix.ywrapstep = 0;
+		info->fix.line_length = par->xres * BITS_PER_PIXEL / 8;
 
-	w100fb_activate_var(info);
+		if ((par->xres*par->yres*BITS_PER_PIXEL/8) > (MEM_INT_SIZE+1)) {
+			par->extmem_active = 1;
+			info->fix.smem_len = par->mach->mem->size+1;
+		} else {
+			par->extmem_active = 0;
+			info->fix.smem_len = MEM_INT_SIZE+1;
+		}
 
-	if (par->lcdMode == LCD_MODE_480) {
-		info->fix.line_length = (480 * BITS_PER_PIXEL) / 8;
-		info->fix.smem_len = 0x200000;
-	} else if (par->lcdMode == LCD_MODE_320) {
-		info->fix.line_length = (320 * BITS_PER_PIXEL) / 8;
-		info->fix.smem_len = 0x60000;
-	} else if (par->lcdMode == LCD_MODE_240) {
-		info->fix.line_length = (240 * BITS_PER_PIXEL) / 8;
-		info->fix.smem_len = 0x60000;
-	} else if (par->lcdMode == LCD_MODE_INIT || par->lcdMode == LCD_MODE_640) {
-		info->fix.line_length = (640 * BITS_PER_PIXEL) / 8;
-		info->fix.smem_len = 0x200000;
+		w100fb_activate_var(par);
 	}
-
 	return 0;
 }
 
 
 /*
- *      Frame buffer operations
+ *  Frame buffer operations
  */
 static struct fb_ops w100fb_ops = {
-	.owner = THIS_MODULE,
+	.owner        = THIS_MODULE,
 	.fb_check_var = w100fb_check_var,
-	.fb_set_par = w100fb_set_par,
+	.fb_set_par   = w100fb_set_par,
 	.fb_setcolreg = w100fb_setcolreg,
-	.fb_blank = w100fb_blank,
-	.fb_fillrect = cfb_fillrect,
-	.fb_copyarea = cfb_copyarea,
+	.fb_blank     = w100fb_blank,
+	.fb_fillrect  = cfb_fillrect,
+	.fb_copyarea  = cfb_copyarea,
 	.fb_imageblit = cfb_imageblit,
-	.fb_cursor = soft_cursor,
+	.fb_cursor    = soft_cursor,
 };
 
-
-static void w100fb_clear_screen(u32 mode, long int offset)
+#ifdef CONFIG_PM
+static void w100fb_save_vidmem(struct w100fb_par *par)
 {
-	int i, numPix = 0;
-
-	if (mode == LCD_SHARP_VGA)
-		numPix = 640 * 480;
-	else if (mode == LCD_SHARP_QVGA)
-		numPix = 320 * 240;
+	int memsize;
 
-	for (i = 0; i < numPix; i++)
-		writew(0xffff, remapped_fbuf + offset + (2*i));
-}
-
-
-/* Need to split up the buffers to stay within the limits of kmalloc */
-#define W100_BUF_NUM	6
-static uint32_t *gSaveImagePtr[W100_BUF_NUM] = { NULL };
-
-static void w100fb_save_buffer(void)
-{
-	int i, j, bufsize;
-
-	bufsize=(current_par->xres * current_par->yres * BITS_PER_PIXEL / 8) / W100_BUF_NUM;
-	for (i = 0; i < W100_BUF_NUM; i++) {
-		if (gSaveImagePtr[i] == NULL)
-			gSaveImagePtr[i] = kmalloc(bufsize, GFP_KERNEL);
-		if (gSaveImagePtr[i] == NULL) {
-			w100fb_clear_buffer();
-			printk(KERN_WARNING "can't alloc pre-off image buffer %d\n", i);
-			break;
-		}
-		for (j = 0; j < bufsize/4; j++)
-			*(gSaveImagePtr[i] + j) = readl(remapped_fbuf + (bufsize*i) + j*4);
+	if (par->extmem_active) {
+		memsize=par->mach->mem->size;
+		par->saved_extmem = vmalloc(memsize);
+		if (par->saved_extmem)
+			memcpy_fromio(par->saved_extmem, remapped_fbuf + (W100_FB_BASE-MEM_WINDOW_BASE), memsize);
 	}
+	memsize=MEM_INT_SIZE;
+	par->saved_intmem = vmalloc(memsize);
+	if (par->saved_intmem && par->extmem_active)
+		memcpy_fromio(par->saved_intmem, remapped_fbuf + (W100_FB_BASE-MEM_INT_BASE_VALUE), memsize);
+	else if (par->saved_intmem)
+		memcpy_fromio(par->saved_intmem, remapped_fbuf + (W100_FB_BASE-MEM_WINDOW_BASE), memsize);
 }
 
-
-static void w100fb_restore_buffer(void)
+static void w100fb_restore_vidmem(struct w100fb_par *par)
 {
-	int i, j, bufsize;
+	int memsize;
 
-	bufsize=(current_par->xres * current_par->yres * BITS_PER_PIXEL / 8) / W100_BUF_NUM;
-	for (i = 0; i < W100_BUF_NUM; i++) {
-		if (gSaveImagePtr[i] == NULL) {
-			printk(KERN_WARNING "can't find pre-off image buffer %d\n", i);
-			w100fb_clear_buffer();
-			break;
-		}
-		for (j = 0; j < (bufsize/4); j++)
-			writel(*(gSaveImagePtr[i] + j),remapped_fbuf + (bufsize*i) + (j*4));
-		kfree(gSaveImagePtr[i]);
-		gSaveImagePtr[i] = NULL;
+	if (par->extmem_active && par->saved_extmem) {
+		memsize=par->mach->mem->size;
+		memcpy_toio(remapped_fbuf + (W100_FB_BASE-MEM_WINDOW_BASE), par->saved_extmem, memsize);
+		vfree(par->saved_extmem);
 	}
-}
-
-
-static void w100fb_clear_buffer(void)
-{
-	int i;
-	for (i = 0; i < W100_BUF_NUM; i++) {
-		kfree(gSaveImagePtr[i]);
-		gSaveImagePtr[i] = NULL;
+	if (par->saved_intmem) {
+		memsize=MEM_INT_SIZE;
+		if (par->extmem_active)
+			memcpy_toio(remapped_fbuf + (W100_FB_BASE-MEM_INT_BASE_VALUE), par->saved_intmem, memsize);
+		else
+			memcpy_toio(remapped_fbuf + (W100_FB_BASE-MEM_WINDOW_BASE), par->saved_intmem, memsize);
+		vfree(par->saved_intmem);
 	}
 }
 
-
-#ifdef CONFIG_PM
-static int w100fb_suspend(struct device *dev, pm_message_t state, u32 level)
+static int w100fb_suspend(struct device *dev, pm_message_t state, uint32_t level)
 {
 	if (level == SUSPEND_POWER_DOWN) {
 		struct fb_info *info = dev_get_drvdata(dev);
 		struct w100fb_par *par=info->par;
+		struct w100_tg_info *tg = par->mach->tg;
 
-		w100fb_save_buffer();
-		lcdtg_suspend();
+		w100fb_save_vidmem(par);
+		if(tg && tg->suspend)
+			tg->suspend(par);
 		w100_suspend(W100_SUSPEND_ALL);
-		par->blanking_flag = 1;
+		par->blanked = 1;
 	}
 	return 0;
 }
 
-static int w100fb_resume(struct device *dev, u32 level)
+static int w100fb_resume(struct device *dev, uint32_t level)
 {
 	if (level == RESUME_POWER_ON) {
 		struct fb_info *info = dev_get_drvdata(dev);
 		struct w100fb_par *par=info->par;
-
-		w100_resume();
-		w100fb_restore_buffer();
-		lcdtg_resume();
-		par->blanking_flag = 0;
+		struct w100_tg_info *tg = par->mach->tg;
+
+		w100_hw_init(par);
+		w100fb_activate_var(par);
+		w100fb_restore_vidmem(par);
+		if(tg && tg->resume)
+			tg->resume(par);
+		par->blanked = 0;
 	}
 	return 0;
 }
 #else
-#define w100fb_suspend	NULL
-#define w100fb_resume	NULL
+#define w100fb_suspend  NULL
+#define w100fb_resume   NULL
 #endif
 
 
 int __init w100fb_probe(struct device *dev)
 {
+	int err = -EIO;
 	struct w100fb_mach_info *inf;
-	struct fb_info *info;
+	struct fb_info *info = NULL;
 	struct w100fb_par *par;
 	struct platform_device *pdev = to_platform_device(dev);
 	struct resource *mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	unsigned int chip_id;
 
 	if (!mem)
 		return -EINVAL;
 
-	/* remap the areas we're going to use */
+	/* Remap the chip base address */
 	remapped_base = ioremap_nocache(mem->start+W100_CFG_BASE, W100_CFG_LEN);
 	if (remapped_base == NULL)
-		return -EIO;
+		goto out;
 
+	/* Map the register space */
 	remapped_regs = ioremap_nocache(mem->start+W100_REG_BASE, W100_REG_LEN);
-	if (remapped_regs == NULL) {
-		iounmap(remapped_base);
-		return -EIO;
+	if (remapped_regs == NULL)
+		goto out;
+
+	/* Identify the chip */
+	printk("Found ");
+	chip_id = readl(remapped_regs + mmCHIP_ID);
+	switch(chip_id) {
+		case CHIP_ID_W100:  printk("w100");  break;
+		case CHIP_ID_W3200: printk("w3200"); break;
+		case CHIP_ID_W3220: printk("w3220"); break;
+		default:
+			printk("Unknown imageon chip ID\n");
+			err = -ENODEV;
+			goto out;
 	}
+	printk(" at 0x%08lx.\n", mem->start+W100_CFG_BASE);
 
-	remapped_fbuf = ioremap_nocache(mem->start+MEM_EXT_BASE_VALUE, REMAPPED_FB_LEN);
-	if (remapped_fbuf == NULL) {
-		iounmap(remapped_base);
-		iounmap(remapped_regs);
-		return -EIO;
-	}
+	/* Remap the framebuffer */
+	remapped_fbuf = ioremap_nocache(mem->start+MEM_WINDOW_BASE, MEM_WINDOW_SIZE);
+	if (remapped_fbuf == NULL)
+		goto out;
 
 	info=framebuffer_alloc(sizeof(struct w100fb_par), dev);
 	if (!info) {
-		iounmap(remapped_base);
-		iounmap(remapped_regs);
-		iounmap(remapped_fbuf);
-		return -ENOMEM;
+		err = -ENOMEM;
+		goto out;
 	}
 
-	info->device=dev;
 	par = info->par;
-	current_par=info->par;
 	dev_set_drvdata(dev, info);
 
 	inf = dev->platform_data;
-	par->phadadj = inf->phadadj;
-	par->comadj = inf->comadj;
-	par->fastsysclk_mode = 75;
-	par->lcdMode = LCD_MODE_INIT;
-	par->rotation_flag=0;
-	par->blanking_flag=0;
-	w100fb_ssp_send = inf->w100fb_ssp_send;
-
-	w100_hw_init();
-	w100_pwm_setup();
+	par->chip_id = chip_id;
+	par->mach = inf;
+	par->fastpll_mode = 0;
+	par->blanked = 0;
+
+	par->pll_table=w100_get_xtal_table(inf->xtal_freq);
+	if (!par->pll_table) {
+		printk(KERN_ERR "No matching Xtal definition found\n");
+		err = -EINVAL;
+		goto out;
+	}
 
 	info->pseudo_palette = kmalloc(sizeof (u32) * MAX_PALETTES, GFP_KERNEL);
 	if (!info->pseudo_palette) {
-		iounmap(remapped_base);
-		iounmap(remapped_regs);
-		iounmap(remapped_fbuf);
-		return -ENOMEM;
+		err = -ENOMEM;
+		goto out;
 	}
 
 	info->fbops = &w100fb_ops;
 	info->flags = FBINFO_DEFAULT;
 	info->node = -1;
-	info->screen_base = remapped_fbuf;
+	info->screen_base = remapped_fbuf + (W100_FB_BASE-MEM_WINDOW_BASE);
 	info->screen_size = REMAPPED_FB_LEN;
 
-	info->var.xres = 640;
+	strcpy(info->fix.id, "w100fb");
+	info->fix.type = FB_TYPE_PACKED_PIXELS;
+	info->fix.type_aux = 0;
+	info->fix.accel = FB_ACCEL_NONE;
+	info->fix.smem_start = mem->start+W100_FB_BASE;
+	info->fix.mmio_start = mem->start+W100_REG_BASE;
+	info->fix.mmio_len = W100_REG_LEN;
+
+	if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) {
+		err = -ENOMEM;
+		goto out;
+	}
+
+	par->mode = &inf->modelist[0];
+	if(inf->init_mode & INIT_MODE_ROTATED) {
+		info->var.xres = par->mode->yres;
+		info->var.yres = par->mode->xres;
+	}
+	else {
+		info->var.xres = par->mode->xres;
+		info->var.yres = par->mode->yres;
+	}
+
+	if(inf->init_mode &= INIT_MODE_FLIPPED)
+		par->flip = 1;
+	else
+		par->flip = 0;
+
 	info->var.xres_virtual = info->var.xres;
-	info->var.yres = 480;
 	info->var.yres_virtual = info->var.yres;
-	info->var.pixclock = 0x04;	/* 171521; */
+	info->var.pixclock = 0x04;  /* 171521; */
 	info->var.sync = 0;
 	info->var.grayscale = 0;
 	info->var.xoffset = info->var.yoffset = 0;
 	info->var.accel_flags = 0;
 	info->var.activate = FB_ACTIVATE_NOW;
 
-	strcpy(info->fix.id, "w100fb");
-	info->fix.type = FB_TYPE_PACKED_PIXELS;
-	info->fix.type_aux = 0;
-	info->fix.accel = FB_ACCEL_NONE;
-	info->fix.smem_start = mem->start+MEM_EXT_BASE_VALUE;
-	info->fix.mmio_start = mem->start+W100_REG_BASE;
-	info->fix.mmio_len = W100_REG_LEN;
+	w100_hw_init(par);
+
+	if (w100fb_check_var(&info->var, info) < 0) {
+		err = -EINVAL;
+		goto out;
+	}
 
-	w100fb_check_var(&info->var, info);
 	w100fb_set_par(info);
 
 	if (register_framebuffer(info) < 0) {
-		kfree(info->pseudo_palette);
-		iounmap(remapped_base);
-		iounmap(remapped_regs);
-		iounmap(remapped_fbuf);
-		return -EINVAL;
+		err = -EINVAL;
+		goto out;
 	}
 
-	device_create_file(dev, &dev_attr_fastsysclk);
+	device_create_file(dev, &dev_attr_fastpllclk);
 	device_create_file(dev, &dev_attr_reg_read);
 	device_create_file(dev, &dev_attr_reg_write);
-	device_create_file(dev, &dev_attr_rotation);
+	device_create_file(dev, &dev_attr_flip);
 
 	printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node, info->fix.id);
 	return 0;
+out:
+	fb_dealloc_cmap(&info->cmap);
+	kfree(info->pseudo_palette);
+	if (remapped_fbuf != NULL)
+		iounmap(remapped_fbuf);
+	if (remapped_regs != NULL)
+		iounmap(remapped_regs);
+	if (remapped_base != NULL)
+		iounmap(remapped_base);
+	if (info)
+		framebuffer_release(info);
+	return err;
 }
 
 
 static int w100fb_remove(struct device *dev)
 {
 	struct fb_info *info = dev_get_drvdata(dev);
+	struct w100fb_par *par=info->par;
 
-	device_remove_file(dev, &dev_attr_fastsysclk);
+	device_remove_file(dev, &dev_attr_fastpllclk);
 	device_remove_file(dev, &dev_attr_reg_read);
 	device_remove_file(dev, &dev_attr_reg_write);
-	device_remove_file(dev, &dev_attr_rotation);
+	device_remove_file(dev, &dev_attr_flip);
 
 	unregister_framebuffer(info);
 
-	w100fb_clear_buffer();
+	vfree(par->saved_intmem);
+	vfree(par->saved_extmem);
 	kfree(info->pseudo_palette);
+	fb_dealloc_cmap(&info->cmap);
 
 	iounmap(remapped_base);
 	iounmap(remapped_regs);
@@ -721,10 +664,54 @@ static void w100_soft_reset(void)
 	udelay(100);
 }
 
+static void w100_update_disable(void)
+{
+	union disp_db_buf_cntl_wr_u disp_db_buf_wr_cntl;
+
+	/* Prevent display updates */
+	disp_db_buf_wr_cntl.f.db_buf_cntl = 0x1e;
+	disp_db_buf_wr_cntl.f.update_db_buf = 0;
+	disp_db_buf_wr_cntl.f.en_db_buf = 0;
+	writel((u32) (disp_db_buf_wr_cntl.val), remapped_regs + mmDISP_DB_BUF_CNTL);
+}
+
+static void w100_update_enable(void)
+{
+	union disp_db_buf_cntl_wr_u disp_db_buf_wr_cntl;
+
+	/* Enable display updates */
+	disp_db_buf_wr_cntl.f.db_buf_cntl = 0x1e;
+	disp_db_buf_wr_cntl.f.update_db_buf = 1;
+	disp_db_buf_wr_cntl.f.en_db_buf = 1;
+	writel((u32) (disp_db_buf_wr_cntl.val), remapped_regs + mmDISP_DB_BUF_CNTL);
+}
+
+unsigned long w100fb_gpio_read(int port)
+{
+	unsigned long value;
+
+	if (port==W100_GPIO_PORT_A)
+		value = readl(remapped_regs + mmGPIO_DATA);
+	else
+		value = readl(remapped_regs + mmGPIO_DATA2);
+
+	return value;
+}
+
+void w100fb_gpio_write(int port, unsigned long value)
+{
+	if (port==W100_GPIO_PORT_A)
+		value = writel(value, remapped_regs + mmGPIO_DATA);
+	else
+		value = writel(value, remapped_regs + mmGPIO_DATA2);
+}
+EXPORT_SYMBOL(w100fb_gpio_read);
+EXPORT_SYMBOL(w100fb_gpio_write);
+
 /*
  * Initialization of critical w100 hardware
  */
-static void w100_hw_init(void)
+static void w100_hw_init(struct w100fb_par *par)
 {
 	u32 temp32;
 	union cif_cntl_u cif_cntl;
@@ -735,8 +722,8 @@ static void w100_hw_init(void)
 	union cpu_defaults_u cpu_default;
 	union cif_write_dbg_u cif_write_dbg;
 	union wrap_start_dir_u wrap_start_dir;
-	union mc_ext_mem_location_u mc_ext_mem_loc;
 	union cif_io_u cif_io;
+	struct w100_gpio_regs *gpio = par->mach->gpio;
 
 	w100_soft_reset();
 
@@ -791,19 +778,6 @@ static void w100_hw_init(void)
 	cfgreg_base.f.cfgreg_base = W100_CFG_BASE;
 	writel((u32) (cfgreg_base.val), remapped_regs + mmCFGREG_BASE);
 
-	/* This location is relative to internal w100 addresses */
-	writel(0x15FF1000, remapped_regs + mmMC_FB_LOCATION);
-
-	mc_ext_mem_loc.val = defMC_EXT_MEM_LOCATION;
-	mc_ext_mem_loc.f.mc_ext_mem_start = MEM_EXT_BASE_VALUE >> 8;
-	mc_ext_mem_loc.f.mc_ext_mem_top = MEM_EXT_TOP_VALUE >> 8;
-	writel((u32) (mc_ext_mem_loc.val), remapped_regs + mmMC_EXT_MEM_LOCATION);
-
-	if ((current_par->lcdMode == LCD_MODE_240) || (current_par->lcdMode == LCD_MODE_320))
-		w100_InitExtMem(LCD_SHARP_QVGA);
-	else
-		w100_InitExtMem(LCD_SHARP_VGA);
-
 	wrap_start_dir.val = defWRAP_START_DIR;
 	wrap_start_dir.f.start_addr = WRAP_BUF_BASE_VALUE >> 1;
 	writel((u32) (wrap_start_dir.val), remapped_regs + mmWRAP_START_DIR);
@@ -813,21 +787,24 @@ static void w100_hw_init(void)
 	writel((u32) (wrap_top_dir.val), remapped_regs + mmWRAP_TOP_DIR);
 
 	writel((u32) 0x2440, remapped_regs + mmRBBM_CNTL);
-}
 
+	/* Set the hardware to 565 colour */
+	temp32 = readl(remapped_regs + mmDISP_DEBUG2);
+	temp32 &= 0xff7fffff;
+	temp32 |= 0x00800000;
+	writel(temp32, remapped_regs + mmDISP_DEBUG2);
 
-/*
- * Types
- */
+	/* Initialise the GPIO lines */
+	if (gpio) {
+		writel(gpio->init_data1, remapped_regs + mmGPIO_DATA);
+		writel(gpio->init_data2, remapped_regs + mmGPIO_DATA2);
+		writel(gpio->gpio_dir1,  remapped_regs + mmGPIO_CNTL1);
+		writel(gpio->gpio_oe1,   remapped_regs + mmGPIO_CNTL2);
+		writel(gpio->gpio_dir2,  remapped_regs + mmGPIO_CNTL3);
+		writel(gpio->gpio_oe2,   remapped_regs + mmGPIO_CNTL4);
+	}
+}
 
-struct pll_parm {
-	u16 freq;		/* desired Fout for PLL */
-	u8 M;
-	u8 N_int;
-	u8 N_fac;
-	u8 tfgoal;
-	u8 lock_time;
-};
 
 struct power_state {
 	union clk_pin_cntl_u clk_pin_cntl;
@@ -835,317 +812,275 @@ struct power_state {
 	union pll_cntl_u pll_cntl;
 	union sclk_cntl_u sclk_cntl;
 	union pclk_cntl_u pclk_cntl;
-	union clk_test_cntl_u clk_test_cntl;
 	union pwrmgt_cntl_u pwrmgt_cntl;
-	u32 freq;		/* Fout for PLL calibration */
-	u8 tf100;		/* for pll calibration */
-	u8 tf80;		/* for pll calibration */
-	u8 tf20;		/* for pll calibration */
-	u8 M;			/* for pll calibration */
-	u8 N_int;		/* for pll calibration */
-	u8 N_fac;		/* for pll calibration */
-	u8 lock_time;	/* for pll calibration */
-	u8 tfgoal;		/* for pll calibration */
-	u8 auto_mode;	/* hardware auto switch? */
-	u8 pwm_mode;		/* 0 fast, 1 normal/slow */
-	u16 fast_sclk;	/* fast clk freq */
-	u16 norm_sclk;	/* slow clk freq */
+	int auto_mode;  /* system clock auto changing? */
 };
 
 
-/*
- * Global state variables
- */
-
 static struct power_state w100_pwr_state;
 
-/* This table is specific for 12.5MHz ref crystal.  */
-static struct pll_parm gPLLTable[] = {
-    /*freq     M   N_int    N_fac  tfgoal  lock_time */
-    { 50,      0,   1,       0,     0xE0,        56}, /*  50.00 MHz */
-    { 75,      0,   5,       0,     0xDE,	     37}, /*  75.00 MHz */
-    {100,      0,   7,       0,     0xE0,        28}, /* 100.00 MHz */
-    {125,      0,   9,       0,     0xE0,        22}, /* 125.00 MHz */
-    {150,      0,   11,      0,     0xE0,        17}, /* 150.00 MHz */
-    {  0,      0,   0,       0,        0,         0}  /* Terminator */
+/* The PLL Fout is determined by (XtalFreq/(M+1)) * ((N_int+1) + (N_fac/8)) */
+
+/* 12.5MHz Crystal PLL Table */
+static struct w100_pll_info xtal_12500000[] = {
+	/*freq     M   N_int    N_fac  tfgoal  lock_time */
+	{ 50,      0,   1,       0,     0xe0,        56},  /*  50.00 MHz */
+	{ 75,      0,   5,       0,     0xde,        37},  /*  75.00 MHz */
+	{100,      0,   7,       0,     0xe0,        28},  /* 100.00 MHz */
+	{125,      0,   9,       0,     0xe0,        22},  /* 125.00 MHz */
+	{150,      0,   11,      0,     0xe0,        17},  /* 150.00 MHz */
+	{  0,      0,   0,       0,        0,         0},  /* Terminator */
 };
 
+/* 14.318MHz Crystal PLL Table */
+static struct w100_pll_info xtal_14318000[] = {
+	/*freq     M   N_int    N_fac  tfgoal  lock_time */
+	{ 40,      4,   13,      0,     0xe0,        80}, /* tfgoal guessed */
+	{ 50,      1,   6,       0,     0xe0,	     64}, /*  50.05 MHz */
+	{ 57,      2,   11,      0,     0xe0,        53}, /* tfgoal guessed */
+	{ 75,      0,   4,       3,     0xe0,	     43}, /*  75.08 MHz */
+	{100,      0,   6,       0,     0xe0,        32}, /* 100.10 MHz */
+	{  0,      0,   0,       0,        0,         0},
+};
 
-static u8 w100_pll_get_testcount(u8 testclk_sel)
+/* 16MHz Crystal PLL Table */
+static struct w100_pll_info xtal_16000000[] = {
+	/*freq     M   N_int    N_fac  tfgoal  lock_time */
+	{ 72,      1,   8,       0,     0xe0,        48}, /* tfgoal guessed */
+	{ 95,      1,   10,      7,     0xe0,        38}, /* tfgoal guessed */
+	{ 96,      1,   11,      0,     0xe0,        36}, /* tfgoal guessed */
+	{  0,      0,   0,       0,        0,         0},
+};
+
+static struct pll_entries {
+	int xtal_freq;
+	struct w100_pll_info *pll_table;
+} w100_pll_tables[] = {
+	{ 12500000, &xtal_12500000[0] },
+	{ 14318000, &xtal_14318000[0] },
+	{ 16000000, &xtal_16000000[0] },
+	{ 0 },
+};
+
+struct w100_pll_info *w100_get_xtal_table(unsigned int freq)
 {
+	struct pll_entries *pll_entry = w100_pll_tables;
+
+	do {
+		if (freq == pll_entry->xtal_freq)
+			return pll_entry->pll_table;
+		pll_entry++;
+	} while (pll_entry->xtal_freq);
+	return 0;
+}
+
+
+static unsigned int w100_get_testcount(unsigned int testclk_sel)
+{
+	union clk_test_cntl_u clk_test_cntl;
+
 	udelay(5);
 
-	w100_pwr_state.clk_test_cntl.f.start_check_freq = 0x0;
-	w100_pwr_state.clk_test_cntl.f.testclk_sel = testclk_sel;
-	w100_pwr_state.clk_test_cntl.f.tstcount_rst = 0x1;	/*reset test count */
-	writel((u32) (w100_pwr_state.clk_test_cntl.val), remapped_regs + mmCLK_TEST_CNTL);
-	w100_pwr_state.clk_test_cntl.f.tstcount_rst = 0x0;
-	writel((u32) (w100_pwr_state.clk_test_cntl.val), remapped_regs + mmCLK_TEST_CNTL);
+	/* Select the test clock source and reset */
+	clk_test_cntl.f.start_check_freq = 0x0;
+	clk_test_cntl.f.testclk_sel = testclk_sel;
+	clk_test_cntl.f.tstcount_rst = 0x1; /* set reset */
+	writel((u32) (clk_test_cntl.val), remapped_regs + mmCLK_TEST_CNTL);
 
-	w100_pwr_state.clk_test_cntl.f.start_check_freq = 0x1;
-	writel((u32) (w100_pwr_state.clk_test_cntl.val), remapped_regs + mmCLK_TEST_CNTL);
+	clk_test_cntl.f.tstcount_rst = 0x0; /* clear reset */
+	writel((u32) (clk_test_cntl.val), remapped_regs + mmCLK_TEST_CNTL);
 
+	/* Run clock test */
+	clk_test_cntl.f.start_check_freq = 0x1;
+	writel((u32) (clk_test_cntl.val), remapped_regs + mmCLK_TEST_CNTL);
+
+	/* Give the test time to complete */
 	udelay(20);
 
-	w100_pwr_state.clk_test_cntl.val = readl(remapped_regs + mmCLK_TEST_CNTL);
-	w100_pwr_state.clk_test_cntl.f.start_check_freq = 0x0;
-	writel((u32) (w100_pwr_state.clk_test_cntl.val), remapped_regs + mmCLK_TEST_CNTL);
+	/* Return the result */
+	clk_test_cntl.val = readl(remapped_regs + mmCLK_TEST_CNTL);
+	clk_test_cntl.f.start_check_freq = 0x0;
+	writel((u32) (clk_test_cntl.val), remapped_regs + mmCLK_TEST_CNTL);
 
-	return w100_pwr_state.clk_test_cntl.f.test_count;
+	return clk_test_cntl.f.test_count;
 }
 
 
-static u8 w100_pll_adjust(void)
+static int w100_pll_adjust(struct w100_pll_info *pll)
 {
+	unsigned int tf80;
+	unsigned int tf20;
+
+	/* Initial Settings */
+	w100_pwr_state.pll_cntl.f.pll_pwdn = 0x0;     /* power down */
+	w100_pwr_state.pll_cntl.f.pll_reset = 0x0;    /* not reset */
+	w100_pwr_state.pll_cntl.f.pll_tcpoff = 0x1;   /* Hi-Z */
+	w100_pwr_state.pll_cntl.f.pll_pvg = 0x0;      /* VCO gain = 0 */
+	w100_pwr_state.pll_cntl.f.pll_vcofr = 0x0;    /* VCO frequency range control = off */
+	w100_pwr_state.pll_cntl.f.pll_ioffset = 0x0;  /* current offset inside VCO = 0 */
+	w100_pwr_state.pll_cntl.f.pll_ring_off = 0x0;
+
+	/* Wai Ming 80 percent of VDD 1.3V gives 1.04V, minimum operating voltage is 1.08V
+	 * therefore, commented out the following lines
+	 * tf80 meant tf100
+	 */
 	do {
-		/* Wai Ming 80 percent of VDD 1.3V gives 1.04V, minimum operating voltage is 1.08V
-		 * therefore, commented out the following lines
-		 * tf80 meant tf100
-		 * set VCO input = 0.8 * VDD
-		 */
+		/* set VCO input = 0.8 * VDD */
 		w100_pwr_state.pll_cntl.f.pll_dactal = 0xd;
 		writel((u32) (w100_pwr_state.pll_cntl.val), remapped_regs + mmPLL_CNTL);
 
-		w100_pwr_state.tf80 = w100_pll_get_testcount(0x1);	/* PLLCLK */
-		if (w100_pwr_state.tf80 >= (w100_pwr_state.tfgoal)) {
+		tf80 = w100_get_testcount(TESTCLK_SRC_PLL);
+		if (tf80 >= (pll->tfgoal)) {
 			/* set VCO input = 0.2 * VDD */
 			w100_pwr_state.pll_cntl.f.pll_dactal = 0x7;
 			writel((u32) (w100_pwr_state.pll_cntl.val), remapped_regs + mmPLL_CNTL);
 
-			w100_pwr_state.tf20 = w100_pll_get_testcount(0x1);	/* PLLCLK */
-			if (w100_pwr_state.tf20 <= (w100_pwr_state.tfgoal))
-				return 1; // Success
+			tf20 = w100_get_testcount(TESTCLK_SRC_PLL);
+			if (tf20 <= (pll->tfgoal))
+				return 1;  /* Success */
 
 			if ((w100_pwr_state.pll_cntl.f.pll_vcofr == 0x0) &&
-			    ((w100_pwr_state.pll_cntl.f.pll_pvg == 0x7) ||
-			     (w100_pwr_state.pll_cntl.f.pll_ioffset == 0x0))) {
+				((w100_pwr_state.pll_cntl.f.pll_pvg == 0x7) ||
+				(w100_pwr_state.pll_cntl.f.pll_ioffset == 0x0))) {
 				/* slow VCO config */
 				w100_pwr_state.pll_cntl.f.pll_vcofr = 0x1;
 				w100_pwr_state.pll_cntl.f.pll_pvg = 0x0;
 				w100_pwr_state.pll_cntl.f.pll_ioffset = 0x0;
-				writel((u32) (w100_pwr_state.pll_cntl.val),
-					remapped_regs + mmPLL_CNTL);
 				continue;
 			}
 		}
 		if ((w100_pwr_state.pll_cntl.f.pll_ioffset) < 0x3) {
 			w100_pwr_state.pll_cntl.f.pll_ioffset += 0x1;
-			writel((u32) (w100_pwr_state.pll_cntl.val), remapped_regs + mmPLL_CNTL);
-			continue;
-		}
-		if ((w100_pwr_state.pll_cntl.f.pll_pvg) < 0x7) {
+		} else if ((w100_pwr_state.pll_cntl.f.pll_pvg) < 0x7) {
 			w100_pwr_state.pll_cntl.f.pll_ioffset = 0x0;
 			w100_pwr_state.pll_cntl.f.pll_pvg += 0x1;
-			writel((u32) (w100_pwr_state.pll_cntl.val), remapped_regs + mmPLL_CNTL);
-			continue;
+		} else {
+			return 0;  /* Error */
 		}
-		return 0; // error
 	} while(1);
 }
 
 
 /*
  * w100_pll_calibration
- *                freq = target frequency of the PLL
- *                (note: crystal = 14.3MHz)
  */
-static u8 w100_pll_calibration(u32 freq)
+static int w100_pll_calibration(struct w100_pll_info *pll)
 {
-	u8 status;
-
-	/* initial setting */
-	w100_pwr_state.pll_cntl.f.pll_pwdn = 0x0;		/* power down */
-	w100_pwr_state.pll_cntl.f.pll_reset = 0x0;		/* not reset */
-	w100_pwr_state.pll_cntl.f.pll_tcpoff = 0x1;	/* Hi-Z */
-	w100_pwr_state.pll_cntl.f.pll_pvg = 0x0;		/* VCO gain = 0 */
-	w100_pwr_state.pll_cntl.f.pll_vcofr = 0x0;		/* VCO frequency range control = off */
-	w100_pwr_state.pll_cntl.f.pll_ioffset = 0x0;	/* current offset inside VCO = 0 */
-	w100_pwr_state.pll_cntl.f.pll_ring_off = 0x0;
-	writel((u32) (w100_pwr_state.pll_cntl.val), remapped_regs + mmPLL_CNTL);
+	int status;
 
-	/* check for (tf80 >= tfgoal) && (tf20 =< tfgoal) */
-	if ((w100_pwr_state.tf80 < w100_pwr_state.tfgoal) || (w100_pwr_state.tf20 > w100_pwr_state.tfgoal)) {
-		status=w100_pll_adjust();
-	}
-	/* PLL Reset And Lock */
+	status = w100_pll_adjust(pll);
 
+	/* PLL Reset And Lock */
 	/* set VCO input = 0.5 * VDD */
 	w100_pwr_state.pll_cntl.f.pll_dactal = 0xa;
 	writel((u32) (w100_pwr_state.pll_cntl.val), remapped_regs + mmPLL_CNTL);
 
-	/* reset time */
-	udelay(1);
+	udelay(1);  /* reset time */
 
 	/* enable charge pump */
-	w100_pwr_state.pll_cntl.f.pll_tcpoff = 0x0;	/* normal */
+	w100_pwr_state.pll_cntl.f.pll_tcpoff = 0x0;  /* normal */
 	writel((u32) (w100_pwr_state.pll_cntl.val), remapped_regs + mmPLL_CNTL);
 
-	/* set VCO input = Hi-Z */
-	/* disable DAC */
+	/* set VCO input = Hi-Z, disable DAC */
 	w100_pwr_state.pll_cntl.f.pll_dactal = 0x0;
 	writel((u32) (w100_pwr_state.pll_cntl.val), remapped_regs + mmPLL_CNTL);
 
-	/* lock time */
-	udelay(400);	/* delay 400 us */
+	udelay(400);  /* lock time */
 
 	/* PLL locked */
 
-	w100_pwr_state.sclk_cntl.f.sclk_src_sel = 0x1;	/* PLL clock */
-	writel((u32) (w100_pwr_state.sclk_cntl.val), remapped_regs + mmSCLK_CNTL);
-
-	w100_pwr_state.tf100 = w100_pll_get_testcount(0x1);	/* PLLCLK */
-
 	return status;
 }
 
 
-static u8 w100_pll_set_clk(void)
+static int w100_pll_set_clk(struct w100_pll_info *pll)
 {
-	u8 status;
+	int status;
 
-	if (w100_pwr_state.auto_mode == 1)	/* auto mode */
+	if (w100_pwr_state.auto_mode == 1)  /* auto mode */
 	{
-		w100_pwr_state.pwrmgt_cntl.f.pwm_fast_noml_hw_en = 0x0;	/* disable fast to normal */
-		w100_pwr_state.pwrmgt_cntl.f.pwm_noml_fast_hw_en = 0x0;	/* disable normal to fast */
+		w100_pwr_state.pwrmgt_cntl.f.pwm_fast_noml_hw_en = 0x0;  /* disable fast to normal */
+		w100_pwr_state.pwrmgt_cntl.f.pwm_noml_fast_hw_en = 0x0;  /* disable normal to fast */
 		writel((u32) (w100_pwr_state.pwrmgt_cntl.val), remapped_regs + mmPWRMGT_CNTL);
 	}
 
-	w100_pwr_state.sclk_cntl.f.sclk_src_sel = 0x0;	/* crystal clock */
+	/* Set system clock source to XTAL whilst adjusting the PLL! */
+	w100_pwr_state.sclk_cntl.f.sclk_src_sel = CLK_SRC_XTAL;
 	writel((u32) (w100_pwr_state.sclk_cntl.val), remapped_regs + mmSCLK_CNTL);
 
-	w100_pwr_state.pll_ref_fb_div.f.pll_ref_div = w100_pwr_state.M;
-	w100_pwr_state.pll_ref_fb_div.f.pll_fb_div_int = w100_pwr_state.N_int;
-	w100_pwr_state.pll_ref_fb_div.f.pll_fb_div_frac = w100_pwr_state.N_fac;
-	w100_pwr_state.pll_ref_fb_div.f.pll_lock_time = w100_pwr_state.lock_time;
+	w100_pwr_state.pll_ref_fb_div.f.pll_ref_div = pll->M;
+	w100_pwr_state.pll_ref_fb_div.f.pll_fb_div_int = pll->N_int;
+	w100_pwr_state.pll_ref_fb_div.f.pll_fb_div_frac = pll->N_fac;
+	w100_pwr_state.pll_ref_fb_div.f.pll_lock_time = pll->lock_time;
 	writel((u32) (w100_pwr_state.pll_ref_fb_div.val), remapped_regs + mmPLL_REF_FB_DIV);
 
 	w100_pwr_state.pwrmgt_cntl.f.pwm_mode_req = 0;
 	writel((u32) (w100_pwr_state.pwrmgt_cntl.val), remapped_regs + mmPWRMGT_CNTL);
 
-	status = w100_pll_calibration (w100_pwr_state.freq);
+	status = w100_pll_calibration(pll);
 
-	if (w100_pwr_state.auto_mode == 1)	/* auto mode */
+	if (w100_pwr_state.auto_mode == 1)  /* auto mode */
 	{
-		w100_pwr_state.pwrmgt_cntl.f.pwm_fast_noml_hw_en = 0x1;	/* reenable fast to normal */
-		w100_pwr_state.pwrmgt_cntl.f.pwm_noml_fast_hw_en = 0x1;	/* reenable normal to fast  */
+		w100_pwr_state.pwrmgt_cntl.f.pwm_fast_noml_hw_en = 0x1;  /* reenable fast to normal */
+		w100_pwr_state.pwrmgt_cntl.f.pwm_noml_fast_hw_en = 0x1;  /* reenable normal to fast  */
 		writel((u32) (w100_pwr_state.pwrmgt_cntl.val), remapped_regs + mmPWRMGT_CNTL);
 	}
 	return status;
 }
 
-
-/* assume reference crystal clk is 12.5MHz,
- * and that doubling is not enabled.
- *
- * Freq = 12 == 12.5MHz.
- */
-static u16 w100_set_slowsysclk(u16 freq)
-{
-	if (w100_pwr_state.norm_sclk == freq)
-		return freq;
-
-	if (w100_pwr_state.auto_mode == 1)	/* auto mode */
-		return 0;
-
-	if (freq == 12) {
-		w100_pwr_state.norm_sclk = freq;
-		w100_pwr_state.sclk_cntl.f.sclk_post_div_slow = 0x0;	/* Pslow = 1 */
-		w100_pwr_state.sclk_cntl.f.sclk_src_sel = 0x0;	/* crystal src */
-
-		writel((u32) (w100_pwr_state.sclk_cntl.val), remapped_regs + mmSCLK_CNTL);
-
-		w100_pwr_state.clk_pin_cntl.f.xtalin_pm_en = 0x1;
-		writel((u32) (w100_pwr_state.clk_pin_cntl.val), remapped_regs + mmCLK_PIN_CNTL);
-
-		w100_pwr_state.pwrmgt_cntl.f.pwm_enable = 0x1;
-		w100_pwr_state.pwrmgt_cntl.f.pwm_mode_req = 0x1;
-		writel((u32) (w100_pwr_state.pwrmgt_cntl.val), remapped_regs + mmPWRMGT_CNTL);
-		w100_pwr_state.pwm_mode = 1;	/* normal mode */
-		return freq;
-	} else
-		return 0;
-}
-
-
-static u16 w100_set_fastsysclk(u16 freq)
+/* freq = target frequency of the PLL */
+static int w100_set_pll_freq(struct w100fb_par *par, unsigned int freq)
 {
-	u16 pll_freq;
-	int i;
-
-	while(1) {
-		pll_freq = (u16) (freq * (w100_pwr_state.sclk_cntl.f.sclk_post_div_fast + 1));
-		i = 0;
-		do {
-			if (pll_freq == gPLLTable[i].freq) {
-				w100_pwr_state.freq = gPLLTable[i].freq * 1000000;
-				w100_pwr_state.M = gPLLTable[i].M;
-				w100_pwr_state.N_int = gPLLTable[i].N_int;
-				w100_pwr_state.N_fac = gPLLTable[i].N_fac;
-				w100_pwr_state.tfgoal = gPLLTable[i].tfgoal;
-				w100_pwr_state.lock_time = gPLLTable[i].lock_time;
-				w100_pwr_state.tf20 = 0xff;	/* set highest */
-				w100_pwr_state.tf80 = 0x00;	/* set lowest */
-
-				w100_pll_set_clk();
-				w100_pwr_state.pwm_mode = 0;	/* fast mode */
-				w100_pwr_state.fast_sclk = freq;
-				return freq;
-			}
-			i++;
-		} while(gPLLTable[i].freq);
+	struct w100_pll_info *pll = par->pll_table;
 
-		if (w100_pwr_state.auto_mode == 1)
-			break;
-
-		if (w100_pwr_state.sclk_cntl.f.sclk_post_div_fast == 0)
-			break;
-
-		w100_pwr_state.sclk_cntl.f.sclk_post_div_fast -= 1;
-		writel((u32) (w100_pwr_state.sclk_cntl.val), remapped_regs + mmSCLK_CNTL);
-	}
+	do {
+		if (freq == pll->freq) {
+			return w100_pll_set_clk(pll);
+		}
+		pll++;
+	} while(pll->freq);
 	return 0;
 }
 
-
 /* Set up an initial state.  Some values/fields set
    here will be overwritten. */
-static void w100_pwm_setup(void)
+static void w100_pwm_setup(struct w100fb_par *par)
 {
 	w100_pwr_state.clk_pin_cntl.f.osc_en = 0x1;
 	w100_pwr_state.clk_pin_cntl.f.osc_gain = 0x1f;
 	w100_pwr_state.clk_pin_cntl.f.dont_use_xtalin = 0x0;
 	w100_pwr_state.clk_pin_cntl.f.xtalin_pm_en = 0x0;
-	w100_pwr_state.clk_pin_cntl.f.xtalin_dbl_en = 0x0;	/* no freq doubling */
+	w100_pwr_state.clk_pin_cntl.f.xtalin_dbl_en = par->mach->xtal_dbl ? 1 : 0;
 	w100_pwr_state.clk_pin_cntl.f.cg_debug = 0x0;
 	writel((u32) (w100_pwr_state.clk_pin_cntl.val), remapped_regs + mmCLK_PIN_CNTL);
 
-	w100_pwr_state.sclk_cntl.f.sclk_src_sel = 0x0;	/* Crystal Clk */
-	w100_pwr_state.sclk_cntl.f.sclk_post_div_fast = 0x0;	/* Pfast = 1 */
+	w100_pwr_state.sclk_cntl.f.sclk_src_sel = CLK_SRC_XTAL;
+	w100_pwr_state.sclk_cntl.f.sclk_post_div_fast = 0x0;  /* Pfast = 1 */
 	w100_pwr_state.sclk_cntl.f.sclk_clkon_hys = 0x3;
-	w100_pwr_state.sclk_cntl.f.sclk_post_div_slow = 0x0;	/* Pslow = 1 */
+	w100_pwr_state.sclk_cntl.f.sclk_post_div_slow = 0x0;  /* Pslow = 1 */
 	w100_pwr_state.sclk_cntl.f.disp_cg_ok2switch_en = 0x0;
-	w100_pwr_state.sclk_cntl.f.sclk_force_reg = 0x0;	/* Dynamic */
-	w100_pwr_state.sclk_cntl.f.sclk_force_disp = 0x0;	/* Dynamic */
-	w100_pwr_state.sclk_cntl.f.sclk_force_mc = 0x0;	/* Dynamic */
-	w100_pwr_state.sclk_cntl.f.sclk_force_extmc = 0x0;	/* Dynamic */
-	w100_pwr_state.sclk_cntl.f.sclk_force_cp = 0x0;	/* Dynamic */
-	w100_pwr_state.sclk_cntl.f.sclk_force_e2 = 0x0;	/* Dynamic */
-	w100_pwr_state.sclk_cntl.f.sclk_force_e3 = 0x0;	/* Dynamic */
-	w100_pwr_state.sclk_cntl.f.sclk_force_idct = 0x0;	/* Dynamic */
-	w100_pwr_state.sclk_cntl.f.sclk_force_bist = 0x0;	/* Dynamic */
+	w100_pwr_state.sclk_cntl.f.sclk_force_reg = 0x0;    /* Dynamic */
+	w100_pwr_state.sclk_cntl.f.sclk_force_disp = 0x0;   /* Dynamic */
+	w100_pwr_state.sclk_cntl.f.sclk_force_mc = 0x0;     /* Dynamic */
+	w100_pwr_state.sclk_cntl.f.sclk_force_extmc = 0x0;  /* Dynamic */
+	w100_pwr_state.sclk_cntl.f.sclk_force_cp = 0x0;     /* Dynamic */
+	w100_pwr_state.sclk_cntl.f.sclk_force_e2 = 0x0;     /* Dynamic */
+	w100_pwr_state.sclk_cntl.f.sclk_force_e3 = 0x0;     /* Dynamic */
+	w100_pwr_state.sclk_cntl.f.sclk_force_idct = 0x0;   /* Dynamic */
+	w100_pwr_state.sclk_cntl.f.sclk_force_bist = 0x0;   /* Dynamic */
 	w100_pwr_state.sclk_cntl.f.busy_extend_cp = 0x0;
 	w100_pwr_state.sclk_cntl.f.busy_extend_e2 = 0x0;
 	w100_pwr_state.sclk_cntl.f.busy_extend_e3 = 0x0;
 	w100_pwr_state.sclk_cntl.f.busy_extend_idct = 0x0;
 	writel((u32) (w100_pwr_state.sclk_cntl.val), remapped_regs + mmSCLK_CNTL);
 
-	w100_pwr_state.pclk_cntl.f.pclk_src_sel = 0x0;	/* Crystal Clk */
-	w100_pwr_state.pclk_cntl.f.pclk_post_div = 0x1;	/* P = 2 */
-	w100_pwr_state.pclk_cntl.f.pclk_force_disp = 0x0;	/* Dynamic */
+	w100_pwr_state.pclk_cntl.f.pclk_src_sel = CLK_SRC_XTAL;
+	w100_pwr_state.pclk_cntl.f.pclk_post_div = 0x1;    /* P = 2 */
+	w100_pwr_state.pclk_cntl.f.pclk_force_disp = 0x0;  /* Dynamic */
 	writel((u32) (w100_pwr_state.pclk_cntl.val), remapped_regs + mmPCLK_CNTL);
 
-	w100_pwr_state.pll_ref_fb_div.f.pll_ref_div = 0x0;	/* M = 1 */
-	w100_pwr_state.pll_ref_fb_div.f.pll_fb_div_int = 0x0;	/* N = 1.0 */
+	w100_pwr_state.pll_ref_fb_div.f.pll_ref_div = 0x0;     /* M = 1 */
+	w100_pwr_state.pll_ref_fb_div.f.pll_fb_div_int = 0x0;  /* N = 1.0 */
 	w100_pwr_state.pll_ref_fb_div.f.pll_fb_div_frac = 0x0;
 	w100_pwr_state.pll_ref_fb_div.f.pll_reset_time = 0x5;
 	w100_pwr_state.pll_ref_fb_div.f.pll_lock_time = 0xff;
@@ -1154,7 +1089,7 @@ static void w100_pwm_setup(void)
 	w100_pwr_state.pll_cntl.f.pll_pwdn = 0x1;
 	w100_pwr_state.pll_cntl.f.pll_reset = 0x1;
 	w100_pwr_state.pll_cntl.f.pll_pm_en = 0x0;
-	w100_pwr_state.pll_cntl.f.pll_mode = 0x0;	/* uses VCO clock */
+	w100_pwr_state.pll_cntl.f.pll_mode = 0x0;  /* uses VCO clock */
 	w100_pwr_state.pll_cntl.f.pll_refclk_sel = 0x0;
 	w100_pwr_state.pll_cntl.f.pll_fbclk_sel = 0x0;
 	w100_pwr_state.pll_cntl.f.pll_tcpoff = 0x0;
@@ -1164,220 +1099,275 @@ static void w100_pwm_setup(void)
 	w100_pwr_state.pll_cntl.f.pll_ioffset = 0x0;
 	w100_pwr_state.pll_cntl.f.pll_pecc_mode = 0x0;
 	w100_pwr_state.pll_cntl.f.pll_pecc_scon = 0x0;
-	w100_pwr_state.pll_cntl.f.pll_dactal = 0x0;	/* Hi-Z */
+	w100_pwr_state.pll_cntl.f.pll_dactal = 0x0;  /* Hi-Z */
 	w100_pwr_state.pll_cntl.f.pll_cp_clip = 0x3;
 	w100_pwr_state.pll_cntl.f.pll_conf = 0x2;
 	w100_pwr_state.pll_cntl.f.pll_mbctrl = 0x2;
 	w100_pwr_state.pll_cntl.f.pll_ring_off = 0x0;
 	writel((u32) (w100_pwr_state.pll_cntl.val), remapped_regs + mmPLL_CNTL);
 
-	w100_pwr_state.clk_test_cntl.f.testclk_sel = 0x1;	/* PLLCLK (for testing) */
-	w100_pwr_state.clk_test_cntl.f.start_check_freq = 0x0;
-	w100_pwr_state.clk_test_cntl.f.tstcount_rst = 0x0;
-	writel((u32) (w100_pwr_state.clk_test_cntl.val), remapped_regs + mmCLK_TEST_CNTL);
-
 	w100_pwr_state.pwrmgt_cntl.f.pwm_enable = 0x0;
-	w100_pwr_state.pwrmgt_cntl.f.pwm_mode_req = 0x1;	/* normal mode (0, 1, 3) */
+	w100_pwr_state.pwrmgt_cntl.f.pwm_mode_req = 0x1;  /* normal mode (0, 1, 3) */
 	w100_pwr_state.pwrmgt_cntl.f.pwm_wakeup_cond = 0x0;
 	w100_pwr_state.pwrmgt_cntl.f.pwm_fast_noml_hw_en = 0x0;
 	w100_pwr_state.pwrmgt_cntl.f.pwm_noml_fast_hw_en = 0x0;
-	w100_pwr_state.pwrmgt_cntl.f.pwm_fast_noml_cond = 0x1;	/* PM4,ENG */
-	w100_pwr_state.pwrmgt_cntl.f.pwm_noml_fast_cond = 0x1;	/* PM4,ENG */
+	w100_pwr_state.pwrmgt_cntl.f.pwm_fast_noml_cond = 0x1;  /* PM4,ENG */
+	w100_pwr_state.pwrmgt_cntl.f.pwm_noml_fast_cond = 0x1;  /* PM4,ENG */
 	w100_pwr_state.pwrmgt_cntl.f.pwm_idle_timer = 0xFF;
 	w100_pwr_state.pwrmgt_cntl.f.pwm_busy_timer = 0xFF;
 	writel((u32) (w100_pwr_state.pwrmgt_cntl.val), remapped_regs + mmPWRMGT_CNTL);
 
-	w100_pwr_state.auto_mode = 0;	/* manual mode */
-	w100_pwr_state.pwm_mode = 1;	/* normal mode (0, 1, 2) */
-	w100_pwr_state.freq = 50000000;	/* 50 MHz */
-	w100_pwr_state.M = 3;	/* M = 4 */
-	w100_pwr_state.N_int = 6;	/* N = 7.0 */
-	w100_pwr_state.N_fac = 0;
-	w100_pwr_state.tfgoal = 0xE0;
-	w100_pwr_state.lock_time = 56;
-	w100_pwr_state.tf20 = 0xff;	/* set highest */
-	w100_pwr_state.tf80 = 0x00;	/* set lowest */
-	w100_pwr_state.tf100 = 0x00;	/* set lowest */
-	w100_pwr_state.fast_sclk = 50;	/* 50.0 MHz */
-	w100_pwr_state.norm_sclk = 12;	/* 12.5 MHz */
+	w100_pwr_state.auto_mode = 0;  /* manual mode */
 }
 
 
-static void w100_init_sharp_lcd(u32 mode)
+/*
+ * Setup the w100 clocks for the specified mode
+ */
+static void w100_init_clocks(struct w100fb_par *par)
 {
-	u32 temp32;
-	union disp_db_buf_cntl_wr_u disp_db_buf_wr_cntl;
+	struct w100_mode *mode = par->mode;
 
-	/* Prevent display updates */
-	disp_db_buf_wr_cntl.f.db_buf_cntl = 0x1e;
-	disp_db_buf_wr_cntl.f.update_db_buf = 0;
-	disp_db_buf_wr_cntl.f.en_db_buf = 0;
-	writel((u32) (disp_db_buf_wr_cntl.val), remapped_regs + mmDISP_DB_BUF_CNTL);
+	if (mode->pixclk_src == CLK_SRC_PLL || mode->sysclk_src == CLK_SRC_PLL)
+		w100_set_pll_freq(par, (par->fastpll_mode && mode->fast_pll_freq) ? mode->fast_pll_freq : mode->pll_freq);
 
-	switch(mode) {
-	case LCD_SHARP_QVGA:
-		w100_set_slowsysclk(12);	/* use crystal -- 12.5MHz */
-		/* not use PLL */
-
-		writel(0x7FFF8000, remapped_regs + mmMC_EXT_MEM_LOCATION);
-		writel(0x85FF8000, remapped_regs + mmMC_FB_LOCATION);
-		writel(0x00000003, remapped_regs + mmLCD_FORMAT);
-		writel(0x00CF1C06, remapped_regs + mmGRAPHIC_CTRL);
-		writel(0x01410145, remapped_regs + mmCRTC_TOTAL);
-		writel(0x01170027, remapped_regs + mmACTIVE_H_DISP);
-		writel(0x01410001, remapped_regs + mmACTIVE_V_DISP);
-		writel(0x01170027, remapped_regs + mmGRAPHIC_H_DISP);
-		writel(0x01410001, remapped_regs + mmGRAPHIC_V_DISP);
-		writel(0x81170027, remapped_regs + mmCRTC_SS);
-		writel(0xA0140000, remapped_regs + mmCRTC_LS);
-		writel(0x00400008, remapped_regs + mmCRTC_REV);
-		writel(0xA0000000, remapped_regs + mmCRTC_DCLK);
-		writel(0xC0140014, remapped_regs + mmCRTC_GS);
-		writel(0x00010141, remapped_regs + mmCRTC_VPOS_GS);
-		writel(0x8015010F, remapped_regs + mmCRTC_GCLK);
-		writel(0x80100110, remapped_regs + mmCRTC_GOE);
-		writel(0x00000000, remapped_regs + mmCRTC_FRAME);
-		writel(0x00000000, remapped_regs + mmCRTC_FRAME_VPOS);
-		writel(0x01CC0000, remapped_regs + mmLCDD_CNTL1);
-		writel(0x0003FFFF, remapped_regs + mmLCDD_CNTL2);
-		writel(0x00FFFF0D, remapped_regs + mmGENLCD_CNTL1);
-		writel(0x003F3003, remapped_regs + mmGENLCD_CNTL2);
-		writel(0x00000000, remapped_regs + mmCRTC_DEFAULT_COUNT);
-		writel(0x0000FF00, remapped_regs + mmLCD_BACKGROUND_COLOR);
-		writel(0x000102aa, remapped_regs + mmGENLCD_CNTL3);
-		writel(0x00800000, remapped_regs + mmGRAPHIC_OFFSET);
-		writel(0x000001e0, remapped_regs + mmGRAPHIC_PITCH);
-		writel(0x000000bf, remapped_regs + mmGPIO_DATA);
-		writel(0x03c0feff, remapped_regs + mmGPIO_CNTL2);
-		writel(0x00000000, remapped_regs + mmGPIO_CNTL1);
-		writel(0x41060010, remapped_regs + mmCRTC_PS1_ACTIVE);
-		break;
-	case LCD_SHARP_VGA:
-		w100_set_slowsysclk(12);	/* use crystal -- 12.5MHz */
-		w100_set_fastsysclk(current_par->fastsysclk_mode);	/* use PLL -- 75.0MHz */
-		w100_pwr_state.pclk_cntl.f.pclk_src_sel = 0x1;
-		w100_pwr_state.pclk_cntl.f.pclk_post_div = 0x2;
-		writel((u32) (w100_pwr_state.pclk_cntl.val), remapped_regs + mmPCLK_CNTL);
-		writel(0x15FF1000, remapped_regs + mmMC_FB_LOCATION);
-		writel(0x9FFF8000, remapped_regs + mmMC_EXT_MEM_LOCATION);
-		writel(0x00000003, remapped_regs + mmLCD_FORMAT);
-		writel(0x00DE1D66, remapped_regs + mmGRAPHIC_CTRL);
-
-		writel(0x0283028B, remapped_regs + mmCRTC_TOTAL);
-		writel(0x02360056, remapped_regs + mmACTIVE_H_DISP);
-		writel(0x02830003, remapped_regs + mmACTIVE_V_DISP);
-		writel(0x02360056, remapped_regs + mmGRAPHIC_H_DISP);
-		writel(0x02830003, remapped_regs + mmGRAPHIC_V_DISP);
-		writel(0x82360056, remapped_regs + mmCRTC_SS);
-		writel(0xA0280000, remapped_regs + mmCRTC_LS);
-		writel(0x00400008, remapped_regs + mmCRTC_REV);
-		writel(0xA0000000, remapped_regs + mmCRTC_DCLK);
-		writel(0x80280028, remapped_regs + mmCRTC_GS);
-		writel(0x02830002, remapped_regs + mmCRTC_VPOS_GS);
-		writel(0x8015010F, remapped_regs + mmCRTC_GCLK);
-		writel(0x80100110, remapped_regs + mmCRTC_GOE);
-		writel(0x00000000, remapped_regs + mmCRTC_FRAME);
-		writel(0x00000000, remapped_regs + mmCRTC_FRAME_VPOS);
-		writel(0x01CC0000, remapped_regs + mmLCDD_CNTL1);
-		writel(0x0003FFFF, remapped_regs + mmLCDD_CNTL2);
-		writel(0x00FFFF0D, remapped_regs + mmGENLCD_CNTL1);
-		writel(0x003F3003, remapped_regs + mmGENLCD_CNTL2);
-		writel(0x00000000, remapped_regs + mmCRTC_DEFAULT_COUNT);
-		writel(0x0000FF00, remapped_regs + mmLCD_BACKGROUND_COLOR);
-		writel(0x000102aa, remapped_regs + mmGENLCD_CNTL3);
-		writel(0x00800000, remapped_regs + mmGRAPHIC_OFFSET);
-		writel(0x000003C0, remapped_regs + mmGRAPHIC_PITCH);
-		writel(0x000000bf, remapped_regs + mmGPIO_DATA);
-		writel(0x03c0feff, remapped_regs + mmGPIO_CNTL2);
-		writel(0x00000000, remapped_regs + mmGPIO_CNTL1);
-		writel(0x41060010, remapped_regs + mmCRTC_PS1_ACTIVE);
-		break;
-	default:
-		break;
-	}
+	w100_pwr_state.sclk_cntl.f.sclk_src_sel = mode->sysclk_src;
+	w100_pwr_state.sclk_cntl.f.sclk_post_div_fast = mode->sysclk_divider;
+	w100_pwr_state.sclk_cntl.f.sclk_post_div_slow = mode->sysclk_divider;
+	writel((u32) (w100_pwr_state.sclk_cntl.val), remapped_regs + mmSCLK_CNTL);
+}
+
+static void w100_init_lcd(struct w100fb_par *par)
+{
+	u32 temp32;
+	struct w100_mode *mode = par->mode;
+	struct w100_gen_regs *regs = par->mach->regs;
+	union active_h_disp_u active_h_disp;
+	union active_v_disp_u active_v_disp;
+	union graphic_h_disp_u graphic_h_disp;
+	union graphic_v_disp_u graphic_v_disp;
+	union crtc_total_u crtc_total;
+
+	/* w3200 doesnt like undefined bits being set so zero register values first */
+
+	active_h_disp.val = 0;
+	active_h_disp.f.active_h_start=mode->left_margin;
+	active_h_disp.f.active_h_end=mode->left_margin + mode->xres;
+	writel(active_h_disp.val, remapped_regs + mmACTIVE_H_DISP);
+
+	active_v_disp.val = 0;
+	active_v_disp.f.active_v_start=mode->upper_margin;
+	active_v_disp.f.active_v_end=mode->upper_margin + mode->yres;
+	writel(active_v_disp.val, remapped_regs + mmACTIVE_V_DISP);
+
+	graphic_h_disp.val = 0;
+	graphic_h_disp.f.graphic_h_start=mode->left_margin;
+	graphic_h_disp.f.graphic_h_end=mode->left_margin + mode->xres;
+	writel(graphic_h_disp.val, remapped_regs + mmGRAPHIC_H_DISP);
+
+	graphic_v_disp.val = 0;
+	graphic_v_disp.f.graphic_v_start=mode->upper_margin;
+	graphic_v_disp.f.graphic_v_end=mode->upper_margin + mode->yres;
+	writel(graphic_v_disp.val, remapped_regs + mmGRAPHIC_V_DISP);
+
+	crtc_total.val = 0;
+	crtc_total.f.crtc_h_total=mode->left_margin  + mode->xres + mode->right_margin;
+	crtc_total.f.crtc_v_total=mode->upper_margin + mode->yres + mode->lower_margin;
+	writel(crtc_total.val, remapped_regs + mmCRTC_TOTAL);
+
+	writel(mode->crtc_ss, remapped_regs + mmCRTC_SS);
+	writel(mode->crtc_ls, remapped_regs + mmCRTC_LS);
+	writel(mode->crtc_gs, remapped_regs + mmCRTC_GS);
+	writel(mode->crtc_vpos_gs, remapped_regs + mmCRTC_VPOS_GS);
+	writel(mode->crtc_rev, remapped_regs + mmCRTC_REV);
+	writel(mode->crtc_dclk, remapped_regs + mmCRTC_DCLK);
+	writel(mode->crtc_gclk, remapped_regs + mmCRTC_GCLK);
+	writel(mode->crtc_goe, remapped_regs + mmCRTC_GOE);
+	writel(mode->crtc_ps1_active, remapped_regs + mmCRTC_PS1_ACTIVE);
+
+	writel(regs->lcd_format, remapped_regs + mmLCD_FORMAT);
+	writel(regs->lcdd_cntl1, remapped_regs + mmLCDD_CNTL1);
+	writel(regs->lcdd_cntl2, remapped_regs + mmLCDD_CNTL2);
+	writel(regs->genlcd_cntl1, remapped_regs + mmGENLCD_CNTL1);
+	writel(regs->genlcd_cntl2, remapped_regs + mmGENLCD_CNTL2);
+	writel(regs->genlcd_cntl3, remapped_regs + mmGENLCD_CNTL3);
+
+	writel(0x00000000, remapped_regs + mmCRTC_FRAME);
+	writel(0x00000000, remapped_regs + mmCRTC_FRAME_VPOS);
+	writel(0x00000000, remapped_regs + mmCRTC_DEFAULT_COUNT);
+	writel(0x0000FF00, remapped_regs + mmLCD_BACKGROUND_COLOR);
 
 	/* Hack for overlay in ext memory */
 	temp32 = readl(remapped_regs + mmDISP_DEBUG2);
 	temp32 |= 0xc0000000;
 	writel(temp32, remapped_regs + mmDISP_DEBUG2);
-
-	/* Re-enable display updates */
-	disp_db_buf_wr_cntl.f.db_buf_cntl = 0x1e;
-	disp_db_buf_wr_cntl.f.update_db_buf = 1;
-	disp_db_buf_wr_cntl.f.en_db_buf = 1;
-	writel((u32) (disp_db_buf_wr_cntl.val), remapped_regs + mmDISP_DB_BUF_CNTL);
 }
 
 
-static void w100_set_vga_rotation_regs(u16 divider, unsigned long ctrl, unsigned long offset, unsigned long pitch)
+static void w100_setup_memory(struct w100fb_par *par)
 {
-	w100_pwr_state.pclk_cntl.f.pclk_src_sel = 0x1;
-	w100_pwr_state.pclk_cntl.f.pclk_post_div = divider;
-	writel((u32) (w100_pwr_state.pclk_cntl.val), remapped_regs + mmPCLK_CNTL);
+	union mc_ext_mem_location_u extmem_location;
+	union mc_fb_location_u intmem_location;
+	struct w100_mem_info *mem = par->mach->mem;
+	struct w100_bm_mem_info *bm_mem = par->mach->bm_mem;
 
-	writel(ctrl, remapped_regs + mmGRAPHIC_CTRL);
-	writel(offset, remapped_regs + mmGRAPHIC_OFFSET);
-	writel(pitch, remapped_regs + mmGRAPHIC_PITCH);
+	if (!par->extmem_active) {
+		w100_suspend(W100_SUSPEND_EXTMEM);
 
-	/* Re-enable display updates */
-	writel(0x0000007b, remapped_regs + mmDISP_DB_BUF_CNTL);
-}
+		/* Map Internal Memory at FB Base */
+		intmem_location.f.mc_fb_start = W100_FB_BASE >> 8;
+		intmem_location.f.mc_fb_top = (W100_FB_BASE+MEM_INT_SIZE) >> 8;
+		writel((u32) (intmem_location.val), remapped_regs + mmMC_FB_LOCATION);
 
+		/* Unmap External Memory - value is *probably* irrelevant but may have meaning
+		   to acceleration libraries */
+		extmem_location.f.mc_ext_mem_start = MEM_EXT_BASE_VALUE >> 8;
+		extmem_location.f.mc_ext_mem_top = (MEM_EXT_BASE_VALUE-1) >> 8;
+		writel((u32) (extmem_location.val), remapped_regs + mmMC_EXT_MEM_LOCATION);
+	} else {
+		/* Map Internal Memory to its default location */
+		intmem_location.f.mc_fb_start = MEM_INT_BASE_VALUE >> 8;
+		intmem_location.f.mc_fb_top = (MEM_INT_BASE_VALUE+MEM_INT_SIZE) >> 8;
+		writel((u32) (intmem_location.val), remapped_regs + mmMC_FB_LOCATION);
 
-static void w100_init_vga_rotation(u16 deg)
-{
-	switch(deg) {
-	case 0:
-		w100_set_vga_rotation_regs(0x02, 0x00DE1D66, 0x00800000, 0x000003c0);
-		break;
-	case 90:
-		w100_set_vga_rotation_regs(0x06, 0x00DE1D0e, 0x00895b00, 0x00000500);
-		break;
-	case 180:
-		w100_set_vga_rotation_regs(0x02, 0x00DE1D7e, 0x00895ffc, 0x000003c0);
-		break;
-	case 270:
-		w100_set_vga_rotation_regs(0x06, 0x00DE1D16, 0x008004fc, 0x00000500);
-		break;
-	default:
-		/* not-support */
-		break;
+		/* Map External Memory at FB Base */
+		extmem_location.f.mc_ext_mem_start = W100_FB_BASE >> 8;
+		extmem_location.f.mc_ext_mem_top = (W100_FB_BASE+par->mach->mem->size) >> 8;
+		writel((u32) (extmem_location.val), remapped_regs + mmMC_EXT_MEM_LOCATION);
+
+		writel(0x00007800, remapped_regs + mmMC_BIST_CTRL);
+		writel(mem->ext_cntl, remapped_regs + mmMEM_EXT_CNTL);
+		writel(0x00200021, remapped_regs + mmMEM_SDRAM_MODE_REG);
+		udelay(100);
+		writel(0x80200021, remapped_regs + mmMEM_SDRAM_MODE_REG);
+		udelay(100);
+		writel(mem->sdram_mode_reg, remapped_regs + mmMEM_SDRAM_MODE_REG);
+		udelay(100);
+		writel(mem->ext_timing_cntl, remapped_regs + mmMEM_EXT_TIMING_CNTL);
+		writel(mem->io_cntl, remapped_regs + mmMEM_IO_CNTL);
+		if (bm_mem) {
+			writel(bm_mem->ext_mem_bw, remapped_regs + mmBM_EXT_MEM_BANDWIDTH);
+			writel(bm_mem->offset, remapped_regs + mmBM_OFFSET);
+			writel(bm_mem->ext_timing_ctl, remapped_regs + mmBM_MEM_EXT_TIMING_CNTL);
+			writel(bm_mem->ext_cntl, remapped_regs + mmBM_MEM_EXT_CNTL);
+			writel(bm_mem->mode_reg, remapped_regs + mmBM_MEM_MODE_REG);
+			writel(bm_mem->io_cntl, remapped_regs + mmBM_MEM_IO_CNTL);
+			writel(bm_mem->config, remapped_regs + mmBM_CONFIG);
+		}
 	}
 }
 
-
-static void w100_set_qvga_rotation_regs(unsigned long ctrl, unsigned long offset, unsigned long pitch)
+static void w100_set_dispregs(struct w100fb_par *par)
 {
-	writel(ctrl, remapped_regs + mmGRAPHIC_CTRL);
-	writel(offset, remapped_regs + mmGRAPHIC_OFFSET);
-	writel(pitch, remapped_regs + mmGRAPHIC_PITCH);
+	unsigned long rot=0, divider, offset=0;
+	union graphic_ctrl_u graphic_ctrl;
+
+	/* See if the mode has been rotated */
+	if (par->xres == par->mode->xres) {
+		if (par->flip) {
+			rot=3; /* 180 degree */
+			offset=(par->xres * par->yres) - 1;
+		} /* else 0 degree */
+		divider = par->mode->pixclk_divider;
+	} else {
+		if (par->flip) {
+			rot=2; /* 270 degree */
+			offset=par->xres - 1;
+		} else {
+			rot=1; /* 90 degree */
+			offset=par->xres * (par->yres - 1);
+		}
+		divider = par->mode->pixclk_divider_rotated;
+	}
 
-	/* Re-enable display updates */
-	writel(0x0000007b, remapped_regs + mmDISP_DB_BUF_CNTL);
+	graphic_ctrl.val = 0; /* w32xx doesn't like undefined bits */
+	switch (par->chip_id) {
+		case CHIP_ID_W100:
+			graphic_ctrl.f_w100.color_depth=6;
+			graphic_ctrl.f_w100.en_crtc=1;
+			graphic_ctrl.f_w100.en_graphic_req=1;
+			graphic_ctrl.f_w100.en_graphic_crtc=1;
+			graphic_ctrl.f_w100.lcd_pclk_on=1;
+			graphic_ctrl.f_w100.lcd_sclk_on=1;
+			graphic_ctrl.f_w100.low_power_on=0;
+			graphic_ctrl.f_w100.req_freq=0;
+			graphic_ctrl.f_w100.portrait_mode=rot;
+
+			/* Zaurus needs this */
+			switch(par->xres) {
+				case 240:
+				case 320:
+				default:
+					graphic_ctrl.f_w100.total_req_graphic=0xa0;
+					break;
+				case 480:
+				case 640:
+					switch(rot) {
+						case 0:  /* 0 */
+						case 3:  /* 180 */
+							graphic_ctrl.f_w100.low_power_on=1;
+							graphic_ctrl.f_w100.req_freq=5;
+						break;
+						case 1:  /* 90 */
+						case 2:  /* 270 */
+							graphic_ctrl.f_w100.req_freq=4;
+							break;
+						default:
+							break;
+					}
+					graphic_ctrl.f_w100.total_req_graphic=0xf0;
+					break;
+			}
+			break;
+		case CHIP_ID_W3200:
+		case CHIP_ID_W3220:
+			graphic_ctrl.f_w32xx.color_depth=6;
+			graphic_ctrl.f_w32xx.en_crtc=1;
+			graphic_ctrl.f_w32xx.en_graphic_req=1;
+			graphic_ctrl.f_w32xx.en_graphic_crtc=1;
+			graphic_ctrl.f_w32xx.lcd_pclk_on=1;
+			graphic_ctrl.f_w32xx.lcd_sclk_on=1;
+			graphic_ctrl.f_w32xx.low_power_on=0;
+			graphic_ctrl.f_w32xx.req_freq=0;
+			graphic_ctrl.f_w32xx.total_req_graphic=par->mode->xres >> 1; /* panel xres, not mode */
+			graphic_ctrl.f_w32xx.portrait_mode=rot;
+			break;
+	}
+
+	/* Set the pixel clock source and divider */
+	w100_pwr_state.pclk_cntl.f.pclk_src_sel = par->mode->pixclk_src;
+	w100_pwr_state.pclk_cntl.f.pclk_post_div = divider;
+	writel((u32) (w100_pwr_state.pclk_cntl.val), remapped_regs + mmPCLK_CNTL);
+
+	writel(graphic_ctrl.val, remapped_regs + mmGRAPHIC_CTRL);
+	writel(W100_FB_BASE + ((offset * BITS_PER_PIXEL/8)&~0x03UL), remapped_regs + mmGRAPHIC_OFFSET);
+	writel((par->xres*BITS_PER_PIXEL/8), remapped_regs + mmGRAPHIC_PITCH);
 }
 
 
-static void w100_init_qvga_rotation(u16 deg)
+/*
+ * Work out how long the sync pulse lasts
+ * Value is 1/(time in seconds)
+ */
+static void calc_hsync(struct w100fb_par *par)
 {
-	switch(deg) {
-	case 0:
-		w100_set_qvga_rotation_regs(0x00d41c06, 0x00800000, 0x000001e0);
-		break;
-	case 90:
-		w100_set_qvga_rotation_regs(0x00d41c0E, 0x00825580, 0x00000280);
-		break;
-	case 180:
-		w100_set_qvga_rotation_regs(0x00d41c1e, 0x008257fc, 0x000001e0);
-		break;
-	case 270:
-		w100_set_qvga_rotation_regs(0x00d41c16, 0x0080027c, 0x00000280);
-		break;
-	default:
-		/* not-support */
-		break;
-	}
-}
+	unsigned long hsync;
+	struct w100_mode *mode = par->mode;
+	union crtc_ss_u crtc_ss;
+
+	if (mode->pixclk_src == CLK_SRC_XTAL)
+		hsync=par->mach->xtal_freq;
+	else
+		hsync=((par->fastpll_mode && mode->fast_pll_freq) ? mode->fast_pll_freq : mode->pll_freq)*100000;
 
+	hsync /= (w100_pwr_state.pclk_cntl.f.pclk_post_div + 1);
+
+	crtc_ss.val = readl(remapped_regs + mmCRTC_SS);
+	if (crtc_ss.val)
+		par->hsync_len = hsync / (crtc_ss.f.ss_end-crtc_ss.f.ss_start);
+	else
+		par->hsync_len = 0;
+}
 
 static void w100_suspend(u32 mode)
 {
@@ -1387,30 +1377,28 @@ static void w100_suspend(u32 mode)
 	writel(0x00FF0000, remapped_regs + mmMC_PERF_MON_CNTL);
 
 	val = readl(remapped_regs + mmMEM_EXT_TIMING_CNTL);
-	val &= ~(0x00100000);	/* bit20=0 */
-	val |= 0xFF000000;	/* bit31:24=0xff */
+	val &= ~(0x00100000);  /* bit20=0 */
+	val |= 0xFF000000;     /* bit31:24=0xff */
 	writel(val, remapped_regs + mmMEM_EXT_TIMING_CNTL);
 
 	val = readl(remapped_regs + mmMEM_EXT_CNTL);
-	val &= ~(0x00040000);	/* bit18=0 */
-	val |= 0x00080000;	/* bit19=1 */
+	val &= ~(0x00040000);  /* bit18=0 */
+	val |= 0x00080000;     /* bit19=1 */
 	writel(val, remapped_regs + mmMEM_EXT_CNTL);
 
-	udelay(1);		/* wait 1us */
+	udelay(1);  /* wait 1us */
 
 	if (mode == W100_SUSPEND_EXTMEM) {
-
 		/* CKE: Tri-State */
 		val = readl(remapped_regs + mmMEM_EXT_CNTL);
-		val |= 0x40000000;	/* bit30=1 */
+		val |= 0x40000000;  /* bit30=1 */
 		writel(val, remapped_regs + mmMEM_EXT_CNTL);
 
 		/* CLK: Stop */
 		val = readl(remapped_regs + mmMEM_EXT_CNTL);
-		val &= ~(0x00000001);	/* bit0=0 */
+		val &= ~(0x00000001);  /* bit0=0 */
 		writel(val, remapped_regs + mmMEM_EXT_CNTL);
 	} else {
-
 		writel(0x00000000, remapped_regs + mmSCLK_CNTL);
 		writel(0x000000BF, remapped_regs + mmCLK_PIN_CNTL);
 		writel(0x00000015, remapped_regs + mmPWRMGT_CNTL);
@@ -1418,43 +1406,16 @@ static void w100_suspend(u32 mode)
 		udelay(5);
 
 		val = readl(remapped_regs + mmPLL_CNTL);
-		val |= 0x00000004;	/* bit2=1 */
+		val |= 0x00000004;  /* bit2=1 */
 		writel(val, remapped_regs + mmPLL_CNTL);
 		writel(0x0000001d, remapped_regs + mmPWRMGT_CNTL);
 	}
 }
 
-
-static void w100_resume(void)
-{
-	u32 temp32;
-
-	w100_hw_init();
-	w100_pwm_setup();
-
-	temp32 = readl(remapped_regs + mmDISP_DEBUG2);
-	temp32 &= 0xff7fffff;
-	temp32 |= 0x00800000;
-	writel(temp32, remapped_regs + mmDISP_DEBUG2);
-
-	if (current_par->lcdMode == LCD_MODE_480 || current_par->lcdMode == LCD_MODE_640) {
-		w100_init_sharp_lcd(LCD_SHARP_VGA);
-		if (current_par->lcdMode == LCD_MODE_640) {
-			w100_init_vga_rotation(current_par->rotation_flag ? 270 : 90);
-		}
-	} else {
-		w100_init_sharp_lcd(LCD_SHARP_QVGA);
-		if (current_par->lcdMode == LCD_MODE_320) {
-			w100_init_qvga_rotation(current_par->rotation_flag ? 270 : 90);
-		}
-	}
-}
-
-
 static void w100_vsync(void)
 {
 	u32 tmp;
-	int timeout = 30000; /* VSync timeout = 30[ms] > 16.8[ms] */
+	int timeout = 30000;  /* VSync timeout = 30[ms] > 16.8[ms] */
 
 	tmp = readl(remapped_regs + mmACTIVE_V_DISP);
 
@@ -1490,363 +1451,6 @@ static void w100_vsync(void)
 	writel(0x00000002, remapped_regs + mmGEN_INT_STATUS);
 }
 
-
-static void w100_InitExtMem(u32 mode)
-{
-	switch(mode) {
-	case LCD_SHARP_QVGA:
-		/* QVGA doesn't use external memory
-		   nothing to do, really. */
-		break;
-	case LCD_SHARP_VGA:
-		writel(0x00007800, remapped_regs + mmMC_BIST_CTRL);
-		writel(0x00040003, remapped_regs + mmMEM_EXT_CNTL);
-		writel(0x00200021, remapped_regs + mmMEM_SDRAM_MODE_REG);
-		udelay(100);
-		writel(0x80200021, remapped_regs + mmMEM_SDRAM_MODE_REG);
-		udelay(100);
-		writel(0x00650021, remapped_regs + mmMEM_SDRAM_MODE_REG);
-		udelay(100);
-		writel(0x10002a4a, remapped_regs + mmMEM_EXT_TIMING_CNTL);
-		writel(0x7ff87012, remapped_regs + mmMEM_IO_CNTL);
-		break;
-	default:
-		break;
-	}
-}
-
-
-#define RESCTL_ADRS     0x00
-#define PHACTRL_ADRS	0x01
-#define DUTYCTRL_ADRS	0x02
-#define POWERREG0_ADRS	0x03
-#define POWERREG1_ADRS	0x04
-#define GPOR3_ADRS		0x05
-#define PICTRL_ADRS     0x06
-#define POLCTRL_ADRS    0x07
-
-#define RESCTL_QVGA     0x01
-#define RESCTL_VGA      0x00
-
-#define POWER1_VW_ON	0x01	/* VW Supply FET ON */
-#define POWER1_GVSS_ON	0x02	/* GVSS(-8V) Power Supply ON */
-#define POWER1_VDD_ON	0x04	/* VDD(8V),SVSS(-4V) Power Supply ON */
-
-#define POWER1_VW_OFF	0x00	/* VW Supply FET OFF */
-#define POWER1_GVSS_OFF	0x00	/* GVSS(-8V) Power Supply OFF */
-#define POWER1_VDD_OFF	0x00	/* VDD(8V),SVSS(-4V) Power Supply OFF */
-
-#define POWER0_COM_DCLK	0x01	/* COM Voltage DC Bias DAC Serial Data Clock */
-#define POWER0_COM_DOUT	0x02	/* COM Voltage DC Bias DAC Serial Data Out */
-#define POWER0_DAC_ON	0x04	/* DAC Power Supply ON */
-#define POWER0_COM_ON	0x08	/* COM Powewr Supply ON */
-#define POWER0_VCC5_ON	0x10	/* VCC5 Power Supply ON */
-
-#define POWER0_DAC_OFF	0x00	/* DAC Power Supply OFF */
-#define POWER0_COM_OFF	0x00	/* COM Powewr Supply OFF */
-#define POWER0_VCC5_OFF	0x00	/* VCC5 Power Supply OFF */
-
-#define PICTRL_INIT_STATE	0x01
-#define PICTRL_INIOFF		0x02
-#define PICTRL_POWER_DOWN	0x04
-#define PICTRL_COM_SIGNAL_OFF	0x08
-#define PICTRL_DAC_SIGNAL_OFF	0x10
-
-#define PICTRL_POWER_ACTIVE	(0)
-
-#define POLCTRL_SYNC_POL_FALL	0x01
-#define POLCTRL_EN_POL_FALL	0x02
-#define POLCTRL_DATA_POL_FALL	0x04
-#define POLCTRL_SYNC_ACT_H	0x08
-#define POLCTRL_EN_ACT_L	0x10
-
-#define POLCTRL_SYNC_POL_RISE	0x00
-#define POLCTRL_EN_POL_RISE	0x00
-#define POLCTRL_DATA_POL_RISE	0x00
-#define POLCTRL_SYNC_ACT_L	0x00
-#define POLCTRL_EN_ACT_H	0x00
-
-#define PHACTRL_PHASE_MANUAL	0x01
-
-#define PHAD_QVGA_DEFAULT_VAL (9)
-#define COMADJ_DEFAULT        (125)
-
-static void lcdtg_ssp_send(u8 adrs, u8 data)
-{
-	w100fb_ssp_send(adrs,data);
-}
-
-/*
- * This is only a psuedo I2C interface. We can't use the standard kernel
- * routines as the interface is write only. We just assume the data is acked...
- */
-static void lcdtg_ssp_i2c_send(u8 data)
-{
-	lcdtg_ssp_send(POWERREG0_ADRS, data);
-	udelay(10);
-}
-
-static void lcdtg_i2c_send_bit(u8 data)
-{
-	lcdtg_ssp_i2c_send(data);
-	lcdtg_ssp_i2c_send(data | POWER0_COM_DCLK);
-	lcdtg_ssp_i2c_send(data);
-}
-
-static void lcdtg_i2c_send_start(u8 base)
-{
-	lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT);
-	lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK);
-	lcdtg_ssp_i2c_send(base);
-}
-
-static void lcdtg_i2c_send_stop(u8 base)
-{
-	lcdtg_ssp_i2c_send(base);
-	lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK);
-	lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT);
-}
-
-static void lcdtg_i2c_send_byte(u8 base, u8 data)
-{
-	int i;
-	for (i = 0; i < 8; i++) {
-		if (data & 0x80)
-			lcdtg_i2c_send_bit(base | POWER0_COM_DOUT);
-		else
-			lcdtg_i2c_send_bit(base);
-		data <<= 1;
-	}
-}
-
-static void lcdtg_i2c_wait_ack(u8 base)
-{
-	lcdtg_i2c_send_bit(base);
-}
-
-static void lcdtg_set_common_voltage(u8 base_data, u8 data)
-{
-	/* Set Common Voltage to M62332FP via I2C */
-	lcdtg_i2c_send_start(base_data);
-	lcdtg_i2c_send_byte(base_data, 0x9c);
-	lcdtg_i2c_wait_ack(base_data);
-	lcdtg_i2c_send_byte(base_data, 0x00);
-	lcdtg_i2c_wait_ack(base_data);
-	lcdtg_i2c_send_byte(base_data, data);
-	lcdtg_i2c_wait_ack(base_data);
-	lcdtg_i2c_send_stop(base_data);
-}
-
-static struct lcdtg_register_setting {
-	u8 adrs;
-	u8 data;
-	u32 wait;
-} lcdtg_power_on_table[] = {
-
-    /* Initialize Internal Logic & Port */
-    { PICTRL_ADRS,
-      PICTRL_POWER_DOWN | PICTRL_INIOFF | PICTRL_INIT_STATE |
-      PICTRL_COM_SIGNAL_OFF | PICTRL_DAC_SIGNAL_OFF,
-      0 },
-
-    { POWERREG0_ADRS,
-      POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_OFF | POWER0_COM_OFF |
-      POWER0_VCC5_OFF,
-      0 },
-
-    { POWERREG1_ADRS,
-      POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF,
-      0 },
-
-    /* VDD(+8V),SVSS(-4V) ON */
-    { POWERREG1_ADRS,
-      POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON /* VDD ON */,
-      3000 },
-
-    /* DAC ON */
-    { POWERREG0_ADRS,
-      POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON /* DAC ON */ |
-      POWER0_COM_OFF | POWER0_VCC5_OFF,
-      0 },
-
-    /* INIB = H, INI = L  */
-    { PICTRL_ADRS,
-      /* PICTL[0] = H , PICTL[1] = PICTL[2] = PICTL[4] = L */
-      PICTRL_INIT_STATE | PICTRL_COM_SIGNAL_OFF,
-      0 },
-
-    /* Set Common Voltage */
-    { 0xfe, 0, 0 },
-
-    /* VCC5 ON */
-    { POWERREG0_ADRS,
-      POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON /* DAC ON */ |
-      POWER0_COM_OFF | POWER0_VCC5_ON /* VCC5 ON */,
-      0 },
-
-    /* GVSS(-8V) ON */
-    { POWERREG1_ADRS,
-      POWER1_VW_OFF | POWER1_GVSS_ON /* GVSS ON */ |
-      POWER1_VDD_ON /* VDD ON */,
-      2000 },
-
-    /* COM SIGNAL ON (PICTL[3] = L) */
-    { PICTRL_ADRS,
-      PICTRL_INIT_STATE,
-      0 },
-
-    /* COM ON */
-    { POWERREG0_ADRS,
-      POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON /* DAC ON */ |
-      POWER0_COM_ON /* COM ON */ | POWER0_VCC5_ON /* VCC5_ON */,
-      0 },
-
-    /* VW ON */
-    { POWERREG1_ADRS,
-      POWER1_VW_ON /* VW ON */ | POWER1_GVSS_ON /* GVSS ON */ |
-      POWER1_VDD_ON /* VDD ON */,
-      0 /* Wait 100ms */ },
-
-    /* Signals output enable */
-    { PICTRL_ADRS,
-      0 /* Signals output enable */,
-      0 },
-
-    { PHACTRL_ADRS,
-      PHACTRL_PHASE_MANUAL,
-      0 },
-
-    /* Initialize for Input Signals from ATI */
-    { POLCTRL_ADRS,
-      POLCTRL_SYNC_POL_RISE | POLCTRL_EN_POL_RISE | POLCTRL_DATA_POL_RISE |
-      POLCTRL_SYNC_ACT_L | POLCTRL_EN_ACT_H,
-      1000 /*100000*/ /* Wait 100ms */ },
-
-    /* end mark */
-    { 0xff, 0, 0 }
-};
-
-static void lcdtg_resume(void)
-{
-	if (current_par->lcdMode == LCD_MODE_480 || current_par->lcdMode == LCD_MODE_640) {
-		lcdtg_hw_init(LCD_SHARP_VGA);
-	} else {
-		lcdtg_hw_init(LCD_SHARP_QVGA);
-	}
-}
-
-static void lcdtg_suspend(void)
-{
-	int i;
-
-	for (i = 0; i < (current_par->xres * current_par->yres); i++) {
-		writew(0xffff, remapped_fbuf + (2*i));
-	}
-
-	/* 60Hz x 2 frame = 16.7msec x 2 = 33.4 msec */
-	mdelay(34);
-
-	/* (1)VW OFF */
-	lcdtg_ssp_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON);
-
-	/* (2)COM OFF */
-	lcdtg_ssp_send(PICTRL_ADRS, PICTRL_COM_SIGNAL_OFF);
-	lcdtg_ssp_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON);
-
-	/* (3)Set Common Voltage Bias 0V */
-	lcdtg_set_common_voltage(POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON, 0);
-
-	/* (4)GVSS OFF */
-	lcdtg_ssp_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON);
-
-	/* (5)VCC5 OFF */
-	lcdtg_ssp_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF);
-
-	/* (6)Set PDWN, INIOFF, DACOFF */
-	lcdtg_ssp_send(PICTRL_ADRS, PICTRL_INIOFF | PICTRL_DAC_SIGNAL_OFF |
-			PICTRL_POWER_DOWN | PICTRL_COM_SIGNAL_OFF);
-
-	/* (7)DAC OFF */
-	lcdtg_ssp_send(POWERREG0_ADRS, POWER0_DAC_OFF | POWER0_COM_OFF | POWER0_VCC5_OFF);
-
-	/* (8)VDD OFF */
-	lcdtg_ssp_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF);
-
-}
-
-static void lcdtg_set_phadadj(u32 mode)
-{
-	int adj;
-
-	if (mode == LCD_SHARP_VGA) {
-		/* Setting for VGA */
-		adj = current_par->phadadj;
-		if (adj < 0) {
-			adj = PHACTRL_PHASE_MANUAL;
-		} else {
-			adj = ((adj & 0x0f) << 1) | PHACTRL_PHASE_MANUAL;
-		}
-	} else {
-		/* Setting for QVGA */
-		adj = (PHAD_QVGA_DEFAULT_VAL << 1) | PHACTRL_PHASE_MANUAL;
-	}
-	lcdtg_ssp_send(PHACTRL_ADRS, adj);
-}
-
-static void lcdtg_hw_init(u32 mode)
-{
-	int i;
-	int comadj;
-
-	i = 0;
-	while(lcdtg_power_on_table[i].adrs != 0xff) {
-		if (lcdtg_power_on_table[i].adrs == 0xfe) {
-			/* Set Common Voltage */
-			comadj = current_par->comadj;
-			if (comadj < 0) {
-				comadj = COMADJ_DEFAULT;
-			}
-			lcdtg_set_common_voltage((POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF), comadj);
-		} else if (lcdtg_power_on_table[i].adrs == PHACTRL_ADRS) {
-			/* Set Phase Adjuct */
-			lcdtg_set_phadadj(mode);
-		} else {
-			/* Other */
-			lcdtg_ssp_send(lcdtg_power_on_table[i].adrs, lcdtg_power_on_table[i].data);
-		}
-		if (lcdtg_power_on_table[i].wait != 0)
-			udelay(lcdtg_power_on_table[i].wait);
-		i++;
-	}
-
-	switch(mode) {
-	case LCD_SHARP_QVGA:
-		/* Set Lcd Resolution (QVGA) */
-		lcdtg_ssp_send(RESCTL_ADRS, RESCTL_QVGA);
-		break;
-	case LCD_SHARP_VGA:
-		/* Set Lcd Resolution (VGA) */
-		lcdtg_ssp_send(RESCTL_ADRS, RESCTL_VGA);
-		break;
-	default:
-		break;
-	}
-}
-
-static void lcdtg_lcd_change(u32 mode)
-{
-	/* Set Phase Adjuct */
-	lcdtg_set_phadadj(mode);
-
-	if (mode == LCD_SHARP_VGA)
-		/* Set Lcd Resolution (VGA) */
-		lcdtg_ssp_send(RESCTL_ADRS, RESCTL_VGA);
-	else if (mode == LCD_SHARP_QVGA)
-		/* Set Lcd Resolution (QVGA) */
-		lcdtg_ssp_send(RESCTL_ADRS, RESCTL_QVGA);
-}
-
-
 static struct device_driver w100fb_driver = {
 	.name		= "w100fb",
 	.bus		= &platform_bus_type,
@@ -1870,4 +1474,4 @@ module_init(w100fb_init);
 module_exit(w100fb_cleanup);
 
 MODULE_DESCRIPTION("ATI Imageon w100 framebuffer driver");
-MODULE_LICENSE("GPLv2");
+MODULE_LICENSE("GPL");