diff options
| author | John Youn <John.Youn@synopsys.com> | 2016-01-11 16:32:14 -0800 |
|---|---|---|
| committer | Felipe Balbi <balbi@kernel.org> | 2016-02-03 20:15:19 +0200 |
| commit | 03b32e4c9bd1b52fcf1e4304e7a704aa0315e398 (patch) | |
| tree | 8c7ea8e9c8b2012aa1a04709b0b270230eabf5fe /drivers/usb | |
| parent | 79c5623f1cb85f33403eb9f1e45124e9f56181f8 (diff) | |
| download | op-kernel-dev-03b32e4c9bd1b52fcf1e4304e7a704aa0315e398.zip op-kernel-dev-03b32e4c9bd1b52fcf1e4304e7a704aa0315e398.tar.gz | |
Revert "usb: dwc2: Move reset into dwc2_get_hwparams()"
This reverts commit 263b7fb557f7 ("usb: dwc2: Move reset into
dwc2_get_hwparams()") due to regression found on bcm2835 platform. USB
ethernet fails, due to being unable to pick up proper parameters when
performing a plain reset before reading hw params.
Below shows the results of the gnptxfsiz and hptxfsiz with and before
and after reverting this (from Stefan Wahren):
So here is the probe result before Patch 1 is applied:
[ 1.283148] dwc2 20980000.usb: Configuration mismatch. dr_mode forced to host
[ 1.313894] dwc2 20980000.usb: gnptxfsiz=00201000
[ 1.314104] dwc2 20980000.usb: hptxfsiz=00000000
[ 1.353908] dwc2 20980000.usb: 256 invalid for host_nperio_tx_fifo_size. Check HW configuration.
[ 1.354262] dwc2 20980000.usb: 512 invalid for host_perio_tx_fifo_size. Check HW configuration.
[ 1.394249] dwc2 20980000.usb: DWC OTG Controller
[ 1.394561] dwc2 20980000.usb: new USB bus registered, assigned bus number 1
[ 1.394917] dwc2 20980000.usb: irq 33, io mem 0x00000000
And here is the probe result after Patch 1 is applied:
[ 1.280107] dwc2 20980000.usb: Configuration mismatch. dr_mode forced to host
[ 1.353949] dwc2 20980000.usb: gnptxfsiz=01001000
[ 1.354166] dwc2 20980000.usb: hptxfsiz=02002000
[ 1.434301] dwc2 20980000.usb: DWC OTG Controller
[ 1.434616] dwc2 20980000.usb: new USB bus registered, assigned bus number 1
[ 1.434973] dwc2 20980000.usb: irq 33, io mem 0x00000000
Tested-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: John Youn <johnyoun@synopsys.com>
Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Reported-by: Remi Pommarel <repk@triplefau.lt>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Remi Pommarel <repk@triplefau.lt>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Diffstat (limited to 'drivers/usb')
| -rw-r--r-- | drivers/usb/dwc2/core.c | 8 | ||||
| -rw-r--r-- | drivers/usb/dwc2/platform.c | 8 |
2 files changed, 7 insertions, 9 deletions
diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c index 39a0fa8..1489d31 100644 --- a/drivers/usb/dwc2/core.c +++ b/drivers/usb/dwc2/core.c @@ -3278,9 +3278,6 @@ static void dwc2_get_dev_hwparams(struct dwc2_hsotg *hsotg) /** * During device initialization, read various hardware configuration * registers and interpret the contents. - * - * This should be called during driver probe. It will perform a core - * soft reset in order to get the reset values of the parameters. */ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg) { @@ -3288,7 +3285,6 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg) unsigned width; u32 hwcfg1, hwcfg2, hwcfg3, hwcfg4; u32 grxfsiz; - int retval; /* * Attempt to ensure this device is really a DWC_otg Controller. @@ -3308,10 +3304,6 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg) hw->snpsid >> 12 & 0xf, hw->snpsid >> 8 & 0xf, hw->snpsid >> 4 & 0xf, hw->snpsid & 0xf, hw->snpsid); - retval = dwc2_core_reset(hsotg); - if (retval) - return retval; - hwcfg1 = dwc2_readl(hsotg->regs + GHWCFG1); hwcfg2 = dwc2_readl(hsotg->regs + GHWCFG2); hwcfg3 = dwc2_readl(hsotg->regs + GHWCFG3); diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c index 510f787..690b9fd 100644 --- a/drivers/usb/dwc2/platform.c +++ b/drivers/usb/dwc2/platform.c @@ -530,7 +530,13 @@ static int dwc2_driver_probe(struct platform_device *dev) if (retval) return retval; - /* Reset the controller and detect hardware config values */ + /* + * Reset before dwc2_get_hwparams() then it could get power-on real + * reset value form registers. + */ + dwc2_core_reset_and_force_dr_mode(hsotg); + + /* Detect config values from hardware */ retval = dwc2_get_hwparams(hsotg); if (retval) goto error; |
