Fix misspellings collected by members of KJ list.

Fix the misspellings of "propogate", "writting" and (oh, the shame
:-) "kenrel" in the source tree.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

2 files changed, 4 insertions, 4 deletions

diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c
index b675735..fbc8c27 100644
--- a/drivers/usb/serial/aircable.c
+++ b/drivers/usb/serial/aircable.c
@@ -9,7 +9,7 @@
  * The device works as an standard CDC device, it has 2 interfaces, the first
  * one is for firmware access and the second is the serial one.
  * The protocol is very simply, there are two posibilities reading or writing.
- * When writting the first urb must have a Header that starts with 0x20 0x29 the
+ * When writing the first urb must have a Header that starts with 0x20 0x29 the
  * next two bytes must say how much data will be sended.
  * When reading the process is almost equal except that the header starts with
  * 0x00 0x20.
@@ -18,7 +18,7 @@
  * buffer: The First and Second byte is used for a Header, the Third and Fourth
  * tells the  device the amount of information the package holds.
  * Packages are 60 bytes long Header Stuff.
- * When writting to the device the first two bytes of the header are 0x20 0x29
+ * When writing to the device the first two bytes of the header are 0x20 0x29
  * When reading the bytes are 0x00 0x20, or 0x00 0x10, there is an strange
  * situation, when too much data arrives to the device because it sends the data
  * but with out the header. I will use a simply hack to override this situation,
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 18f74ac..4807f96 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -2465,7 +2465,7 @@ static int send_cmd_write_uart_register (struct edgeport_port *edge_port, __u8 r
 	    ((edge_serial->is_epic) &&
 	     (!edge_serial->epic_descriptor.Supports.IOSPWriteMCR) &&
 	     (regNum == MCR))) {
-		dbg("SendCmdWriteUartReg - Not writting to MCR Register");
+		dbg("SendCmdWriteUartReg - Not writing to MCR Register");
 		return 0;
 	}
 
@@ -2473,7 +2473,7 @@ static int send_cmd_write_uart_register (struct edgeport_port *edge_port, __u8 r
 	    ((edge_serial->is_epic) &&
 	     (!edge_serial->epic_descriptor.Supports.IOSPWriteLCR) &&
 	     (regNum == LCR))) {
-		dbg ("SendCmdWriteUartReg - Not writting to LCR Register");
+		dbg ("SendCmdWriteUartReg - Not writing to LCR Register");
 		return 0;
 	}