Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb

* 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb: (47 commits)
  uwb: wrong sizeof argument in mac address compare
  uwb: don't use printk_ratelimit() so often
  uwb: use kcalloc where appropriate
  uwb: use time_after() when purging stale beacons
  uwb: add credits for the original developers of the UWB/WUSB/WLP subsystems
  uwb: add entries in the MAINTAINERS file
  uwb: depend on EXPERIMENTAL
  wusb: wusb-cbaf (CBA driver) sysfs ABI simplification
  uwb: document UWB and WUSB sysfs files
  uwb: add symlinks in sysfs between radio controllers and PALs
  uwb: dont tranmit identification IEs
  uwb: i1480/GUWA100U: fix firmware download issues
  uwb: i1480: remove MAC/PHY information checking function
  uwb: add Intel i1480 HWA to the UWB RC quirk table
  uwb: disable command/event filtering for D-Link DUB-1210
  uwb: initialize the debug sub-system
  uwb: Fix handling IEs with empty IE data in uwb_est_get_size()
  wusb: fix bmRequestType for Abort RPipe request
  wusb: fix error path for wusb_set_dev_addr()
  wusb: add HWA host controller driver
  ...

34 files changed, 12188 insertions, 0 deletions

diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index bcefbdd..c23a985 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -97,6 +97,8 @@ source "drivers/usb/core/Kconfig"
 
 source "drivers/usb/mon/Kconfig"
 
+source "drivers/usb/wusbcore/Kconfig"
+
 source "drivers/usb/host/Kconfig"
 
 source "drivers/usb/musb/Kconfig"
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index a419c42..8b7c419 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -16,9 +16,12 @@ obj-$(CONFIG_USB_UHCI_HCD)	+= host/
 obj-$(CONFIG_USB_SL811_HCD)	+= host/
 obj-$(CONFIG_USB_U132_HCD)	+= host/
 obj-$(CONFIG_USB_R8A66597_HCD)	+= host/
+obj-$(CONFIG_USB_HWA_HCD)	+= host/
 
 obj-$(CONFIG_USB_C67X00_HCD)	+= c67x00/
 
+obj-$(CONFIG_USB_WUSB)		+= wusbcore/
+
 obj-$(CONFIG_USB_ACM)		+= class/
 obj-$(CONFIG_USB_PRINTER)	+= class/
 
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 228797e..72fb655 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -305,3 +305,31 @@ config SUPERH_ON_CHIP_R8A66597
 	help
 	   This driver enables support for the on-chip R8A66597 in the
 	   SH7366 and SH7723 processors.
+
+config USB_WHCI_HCD
+	tristate "Wireless USB Host Controller Interface (WHCI) driver (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	depends on PCI && USB
+	select USB_WUSB
+	select UWB_WHCI
+	help
+	  A driver for PCI-based Wireless USB Host Controllers that are
+	  compliant with the WHCI specification.
+
+	  To compile this driver a module, choose M here: the module
+	  will be called "whci-hcd".
+
+config USB_HWA_HCD
+	tristate "Host Wire Adapter (HWA) driver (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	depends on USB
+	select USB_WUSB
+	select UWB_HWA
+	help
+	  This driver enables you to connect Wireless USB devices to
+	  your system using a Host Wire Adaptor USB dongle. This is an
+	  UWB Radio Controller and WUSB Host Controller connected to
+	  your machine via USB (specified in WUSB1.0).
+
+	  To compile this driver a module, choose M here: the module
+	  will be called "hwa-hc".
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index f1edda2..23be222 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -8,6 +8,8 @@ endif
 
 isp1760-objs := isp1760-hcd.o isp1760-if.o
 
+obj-$(CONFIG_USB_WHCI_HCD)	+= whci/
+
 obj-$(CONFIG_PCI)		+= pci-quirks.o
 
 obj-$(CONFIG_USB_EHCI_HCD)	+= ehci-hcd.o
@@ -19,3 +21,4 @@ obj-$(CONFIG_USB_SL811_CS)	+= sl811_cs.o
 obj-$(CONFIG_USB_U132_HCD)	+= u132-hcd.o
 obj-$(CONFIG_USB_R8A66597_HCD)	+= r8a66597-hcd.o
 obj-$(CONFIG_USB_ISP1760_HCD)	+= isp1760.o
+obj-$(CONFIG_USB_HWA_HCD)	+= hwa-hc.o
diff --git a/drivers/usb/host/hwa-hc.c b/drivers/usb/host/hwa-hc.c
new file mode 100644
index 0000000..64be4d8
--- /dev/null
+++ b/drivers/usb/host/hwa-hc.c
@@ -0,0 +1,925 @@
+/*
+ * Host Wire Adapter:
+ * Driver glue, HWA-specific functions, bridges to WAHC and WUSBHC
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * The HWA driver is a simple layer that forwards requests to the WAHC
+ * (Wire Adater Host Controller) or WUSBHC (Wireless USB Host
+ * Controller) layers.
+ *
+ * Host Wire Adapter is the 'WUSB 1.0 standard' name for Wireless-USB
+ * Host Controller that is connected to your system via USB (a USB
+ * dongle that implements a USB host...). There is also a Device Wired
+ * Adaptor, DWA (Wireless USB hub) that uses the same mechanism for
+ * transferring data (it is after all a USB host connected via
+ * Wireless USB), we have a common layer called Wire Adapter Host
+ * Controller that does all the hard work. The WUSBHC (Wireless USB
+ * Host Controller) is the part common to WUSB Host Controllers, the
+ * HWA and the PCI-based one, that is implemented following the WHCI
+ * spec. All these layers are implemented in ../wusbcore.
+ *
+ * The main functions are hwahc_op_urb_{en,de}queue(), that pass the
+ * job of converting a URB to a Wire Adapter
+ *
+ * Entry points:
+ *
+ *   hwahc_driver_*()   Driver initialization, registration and
+ *                      teardown.
+ *
+ *   hwahc_probe()	New device came up, create an instance for
+ *                      it [from device enumeration].
+ *
+ *   hwahc_disconnect()	Remove device instance [from device
+ *                      enumeration].
+ *
+ *   [__]hwahc_op_*()   Host-Wire-Adaptor specific functions for
+ *                      starting/stopping/etc (some might be made also
+ *                      DWA).
+ */
+#include <linux/kernel.h>
+#include <linux/version.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/workqueue.h>
+#include <linux/wait.h>
+#include <linux/completion.h>
+#include "../wusbcore/wa-hc.h"
+#include "../wusbcore/wusbhc.h"
+
+#define D_LOCAL 0
+#include <linux/uwb/debug.h>
+
+struct hwahc {
+	struct wusbhc wusbhc;	/* has to be 1st */
+	struct wahc wa;
+	u8 buffer[16];		/* for misc usb transactions */
+};
+
+/**
+ * FIXME should be wusbhc
+ *
+ * NOTE: we need to cache the Cluster ID because later...there is no
+ *       way to get it :)
+ */
+static int __hwahc_set_cluster_id(struct hwahc *hwahc, u8 cluster_id)
+{
+	int result;
+	struct wusbhc *wusbhc = &hwahc->wusbhc;
+	struct wahc *wa = &hwahc->wa;
+	struct device *dev = &wa->usb_iface->dev;
+
+	result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
+			WUSB_REQ_SET_CLUSTER_ID,
+			USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+			cluster_id,
+			wa->usb_iface->cur_altsetting->desc.bInterfaceNumber,
+			NULL, 0, 1000 /* FIXME: arbitrary */);
+	if (result < 0)
+		dev_err(dev, "Cannot set WUSB Cluster ID to 0x%02x: %d\n",
+			cluster_id, result);
+	else
+		wusbhc->cluster_id = cluster_id;
+	dev_info(dev, "Wireless USB Cluster ID set to 0x%02x\n", cluster_id);
+	return result;
+}
+
+static int __hwahc_op_set_num_dnts(struct wusbhc *wusbhc, u8 interval, u8 slots)
+{
+	struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+	struct wahc *wa = &hwahc->wa;
+
+	return usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
+			WUSB_REQ_SET_NUM_DNTS,
+			USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+			interval << 8 | slots,
+			wa->usb_iface->cur_altsetting->desc.bInterfaceNumber,
+			NULL, 0, 1000 /* FIXME: arbitrary */);
+}
+
+/*
+ * Reset a WUSB host controller and wait for it to complete doing it.
+ *
+ * @usb_hcd:	Pointer to WUSB Host Controller instance.
+ *
+ */
+static int hwahc_op_reset(struct usb_hcd *usb_hcd)
+{
+	int result;
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+	struct device *dev = &hwahc->wa.usb_iface->dev;
+
+	d_fnstart(4, dev, "(hwahc %p)\n", hwahc);
+	mutex_lock(&wusbhc->mutex);
+	wa_nep_disarm(&hwahc->wa);
+	result = __wa_set_feature(&hwahc->wa, WA_RESET);
+	if (result < 0) {
+		dev_err(dev, "error commanding HC to reset: %d\n", result);
+		goto error_unlock;
+	}
+	d_printf(3, dev, "reset: waiting for device to change state\n");
+	result = __wa_wait_status(&hwahc->wa, WA_STATUS_RESETTING, 0);
+	if (result < 0) {
+		dev_err(dev, "error waiting for HC to reset: %d\n", result);
+		goto error_unlock;
+	}
+error_unlock:
+	mutex_unlock(&wusbhc->mutex);
+	d_fnend(4, dev, "(hwahc %p) = %d\n", hwahc, result);
+	return result;
+}
+
+/*
+ * FIXME: break this function up
+ */
+static int hwahc_op_start(struct usb_hcd *usb_hcd)
+{
+	u8 addr;
+	int result;
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+	struct device *dev = &hwahc->wa.usb_iface->dev;
+
+	/* Set up a Host Info WUSB Information Element */
+	d_fnstart(4, dev, "(hwahc %p)\n", hwahc);
+	result = -ENOSPC;
+	mutex_lock(&wusbhc->mutex);
+	/* Start the numbering from the top so that the bottom
+	 * range of the unauth addr space is used for devices,
+	 * the top for HCs; use 0xfe - RC# */
+	addr = wusb_cluster_id_get();
+	if (addr == 0)
+		goto error_cluster_id_get;
+	result = __hwahc_set_cluster_id(hwahc, addr);
+	if (result < 0)
+		goto error_set_cluster_id;
+
+	result = wa_nep_arm(&hwahc->wa, GFP_KERNEL);
+	if (result < 0) {
+		dev_err(dev, "cannot listen to notifications: %d\n", result);
+		goto error_stop;
+	}
+	usb_hcd->uses_new_polling = 1;
+	usb_hcd->poll_rh = 1;
+	usb_hcd->state = HC_STATE_RUNNING;
+	result = 0;
+out:
+	mutex_unlock(&wusbhc->mutex);
+	d_fnend(4, dev, "(hwahc %p) = %d\n", hwahc, result);
+	return result;
+
+error_stop:
+	__wa_stop(&hwahc->wa);
+error_set_cluster_id:
+	wusb_cluster_id_put(wusbhc->cluster_id);
+error_cluster_id_get:
+	goto out;
+
+}
+
+/*
+ * FIXME: break this function up
+ */
+static int __hwahc_op_wusbhc_start(struct wusbhc *wusbhc)
+{
+	int result;
+	struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+	struct device *dev = &hwahc->wa.usb_iface->dev;
+
+	/* Set up a Host Info WUSB Information Element */
+	d_fnstart(4, dev, "(hwahc %p)\n", hwahc);
+	result = -ENOSPC;
+
+	result = __wa_set_feature(&hwahc->wa, WA_ENABLE);
+	if (result < 0) {
+		dev_err(dev, "error commanding HC to start: %d\n", result);
+		goto error_stop;
+	}
+	result = __wa_wait_status(&hwahc->wa, WA_ENABLE, WA_ENABLE);
+	if (result < 0) {
+		dev_err(dev, "error waiting for HC to start: %d\n", result);
+		goto error_stop;
+	}
+	result = 0;
+out:
+	d_fnend(4, dev, "(hwahc %p) = %d\n", hwahc, result);
+	return result;
+
+error_stop:
+	result = __wa_clear_feature(&hwahc->wa, WA_ENABLE);
+	goto out;
+}
+
+static int hwahc_op_suspend(struct usb_hcd *usb_hcd, pm_message_t msg)
+{
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+	dev_err(wusbhc->dev, "%s (%p [%p], 0x%lx) UNIMPLEMENTED\n", __func__,
+		usb_hcd, hwahc, *(unsigned long *) &msg);
+	return -ENOSYS;
+}
+
+static int hwahc_op_resume(struct usb_hcd *usb_hcd)
+{
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+
+	dev_err(wusbhc->dev, "%s (%p [%p]) UNIMPLEMENTED\n", __func__,
+		usb_hcd, hwahc);
+	return -ENOSYS;
+}
+
+static void __hwahc_op_wusbhc_stop(struct wusbhc *wusbhc)
+{
+	int result;
+	struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+	struct device *dev = &hwahc->wa.usb_iface->dev;
+
+	d_fnstart(4, dev, "(hwahc %p)\n", hwahc);
+	/* Nothing for now */
+	d_fnend(4, dev, "(hwahc %p) = %d\n", hwahc, result);
+	return;
+}
+
+/*
+ * No need to abort pipes, as when this is called, all the children
+ * has been disconnected and that has done it [through
+ * usb_disable_interface() -> usb_disable_endpoint() ->
+ * hwahc_op_ep_disable() - >rpipe_ep_disable()].
+ */
+static void hwahc_op_stop(struct usb_hcd *usb_hcd)
+{
+	int result;
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+	struct wahc *wa = &hwahc->wa;
+	struct device *dev = &wa->usb_iface->dev;
+
+	d_fnstart(4, dev, "(hwahc %p)\n", hwahc);
+	mutex_lock(&wusbhc->mutex);
+	wusbhc_stop(wusbhc);
+	wa_nep_disarm(&hwahc->wa);
+	result = __wa_stop(&hwahc->wa);
+	wusb_cluster_id_put(wusbhc->cluster_id);
+	mutex_unlock(&wusbhc->mutex);
+	d_fnend(4, dev, "(hwahc %p) = %d\n", hwahc, result);
+	return;
+}
+
+static int hwahc_op_get_frame_number(struct usb_hcd *usb_hcd)
+{
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+
+	dev_err(wusbhc->dev, "%s (%p [%p]) UNIMPLEMENTED\n", __func__,
+		usb_hcd, hwahc);
+	return -ENOSYS;
+}
+
+static int hwahc_op_urb_enqueue(struct usb_hcd *usb_hcd, struct urb *urb,
+				gfp_t gfp)
+{
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+
+	return wa_urb_enqueue(&hwahc->wa, urb->ep, urb, gfp);
+}
+
+static int hwahc_op_urb_dequeue(struct usb_hcd *usb_hcd, struct urb *urb,
+				int status)
+{
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+
+	return wa_urb_dequeue(&hwahc->wa, urb);
+}
+
+/*
+ * Release resources allocated for an endpoint
+ *
+ * If there is an associated rpipe to this endpoint, go ahead and put it.
+ */
+static void hwahc_op_endpoint_disable(struct usb_hcd *usb_hcd,
+				      struct usb_host_endpoint *ep)
+{
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+
+	rpipe_ep_disable(&hwahc->wa, ep);
+}
+
+/*
+ * Set the UWB MAS allocation for the WUSB cluster
+ *
+ * @stream_index: stream to use (-1 for cancelling the allocation)
+ * @mas: mas bitmap to use
+ */
+static int __hwahc_op_bwa_set(struct wusbhc *wusbhc, s8 stream_index,
+			      const struct uwb_mas_bm *mas)
+{
+	int result;
+	struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+	struct wahc *wa = &hwahc->wa;
+	struct device *dev = &wa->usb_iface->dev;
+	u8 mas_le[UWB_NUM_MAS/8];
+
+	/* Set the stream index */
+	result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
+			WUSB_REQ_SET_STREAM_IDX,
+			USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+			stream_index,
+			wa->usb_iface->cur_altsetting->desc.bInterfaceNumber,
+			NULL, 0, 1000 /* FIXME: arbitrary */);
+	if (result < 0) {
+		dev_err(dev, "Cannot set WUSB stream index: %d\n", result);
+		goto out;
+	}
+	uwb_mas_bm_copy_le(mas_le, mas);
+	/* Set the MAS allocation */
+	result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
+			WUSB_REQ_SET_WUSB_MAS,
+			USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+			0, wa->usb_iface->cur_altsetting->desc.bInterfaceNumber,
+			mas_le, 32, 1000 /* FIXME: arbitrary */);
+	if (result < 0)
+		dev_err(dev, "Cannot set WUSB MAS allocation: %d\n", result);
+out:
+	return result;
+}
+
+/*
+ * Add an IE to the host's MMC
+ *
+ * @interval:    See WUSB1.0[8.5.3.1]
+ * @repeat_cnt:  See WUSB1.0[8.5.3.1]
+ * @handle:      See WUSB1.0[8.5.3.1]
+ * @wuie:        Pointer to the header of the WUSB IE data to add.
+ *               MUST BE allocated in a kmalloc buffer (no stack or
+ *               vmalloc).
+ *
+ * NOTE: the format of the WUSB IEs for MMCs are different to the
+ *       normal MBOA MAC IEs (IE Id + Length in MBOA MAC vs. Length +
+ *       Id in WUSB IEs). Standards...you gotta love'em.
+ */
+static int __hwahc_op_mmcie_add(struct wusbhc *wusbhc, u8 interval,
+				u8 repeat_cnt, u8 handle,
+				struct wuie_hdr *wuie)
+{
+	struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+	struct wahc *wa = &hwahc->wa;
+	u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber;
+
+	return usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
+			WUSB_REQ_ADD_MMC_IE,
+			USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+			interval << 8 | repeat_cnt,
+			handle << 8 | iface_no,
+			wuie, wuie->bLength, 1000 /* FIXME: arbitrary */);
+}
+
+/*
+ * Remove an IE to the host's MMC
+ *
+ * @handle:      See WUSB1.0[8.5.3.1]
+ */
+static int __hwahc_op_mmcie_rm(struct wusbhc *wusbhc, u8 handle)
+{
+	struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+	struct wahc *wa = &hwahc->wa;
+	u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber;
+	return usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
+			WUSB_REQ_REMOVE_MMC_IE,
+			USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+			0, handle << 8 | iface_no,
+			NULL, 0, 1000 /* FIXME: arbitrary */);
+}
+
+/*
+ * Update device information for a given fake port
+ *
+ * @port_idx: Fake port to which device is connected (wusbhc index, not
+ *            USB port number).
+ */
+static int __hwahc_op_dev_info_set(struct wusbhc *wusbhc,
+				   struct wusb_dev *wusb_dev)
+{
+	struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+	struct wahc *wa = &hwahc->wa;
+	u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber;
+	struct hwa_dev_info *dev_info;
+	int ret;
+
+	/* fill out the Device Info buffer and send it */
+	dev_info = kzalloc(sizeof(struct hwa_dev_info), GFP_KERNEL);
+	if (!dev_info)
+		return -ENOMEM;
+	uwb_mas_bm_copy_le(dev_info->bmDeviceAvailability,
+			   &wusb_dev->availability);
+	dev_info->bDeviceAddress = wusb_dev->addr;
+
+	/*
+	 * If the descriptors haven't been read yet, use a default PHY
+	 * rate of 53.3 Mbit/s only.  The correct value will be used
+	 * when this will be called again as part of the
+	 * authentication process (which occurs after the descriptors
+	 * have been read).
+	 */
+	if (wusb_dev->wusb_cap_descr)
+		dev_info->wPHYRates = wusb_dev->wusb_cap_descr->wPHYRates;
+	else
+		dev_info->wPHYRates = cpu_to_le16(USB_WIRELESS_PHY_53);
+
+	ret = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
+			WUSB_REQ_SET_DEV_INFO,
+			USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+			0, wusb_dev->port_idx << 8 | iface_no,
+			dev_info, sizeof(struct hwa_dev_info),
+			1000 /* FIXME: arbitrary */);
+	kfree(dev_info);
+	return ret;
+}
+
+/*
+ * Set host's idea of which encryption (and key) method to use when
+ * talking to ad evice on a given port.
+ *
+ * If key is NULL, it means disable encryption for that "virtual port"
+ * (used when we disconnect).
+ */
+static int __hwahc_dev_set_key(struct wusbhc *wusbhc, u8 port_idx, u32 tkid,
+			       const void *key, size_t key_size,
+			       u8 key_idx)
+{
+	int result = -ENOMEM;
+	struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+	struct wahc *wa = &hwahc->wa;
+	u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber;
+	struct usb_key_descriptor *keyd;
+	size_t keyd_len;
+
+	keyd_len = sizeof(*keyd) + key_size;
+	keyd = kzalloc(keyd_len, GFP_KERNEL);
+	if (keyd == NULL)
+		return -ENOMEM;
+
+	keyd->bLength = keyd_len;
+	keyd->bDescriptorType = USB_DT_KEY;
+	keyd->tTKID[0] = (tkid >>  0) & 0xff;
+	keyd->tTKID[1] = (tkid >>  8) & 0xff;
+	keyd->tTKID[2] = (tkid >> 16) & 0xff;
+	memcpy(keyd->bKeyData, key, key_size);
+
+	result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
+			USB_REQ_SET_DESCRIPTOR,
+			USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+			USB_DT_KEY << 8 | key_idx,
+			port_idx << 8 | iface_no,
+			keyd, keyd_len, 1000 /* FIXME: arbitrary */);
+
+	memset(keyd, 0, sizeof(*keyd));	/* clear keys etc. */
+	kfree(keyd);
+	return result;
+}
+
+/*
+ * Set host's idea of which encryption (and key) method to use when
+ * talking to ad evice on a given port.
+ *
+ * If key is NULL, it means disable encryption for that "virtual port"
+ * (used when we disconnect).
+ */
+static int __hwahc_op_set_ptk(struct wusbhc *wusbhc, u8 port_idx, u32 tkid,
+			      const void *key, size_t key_size)
+{
+	int result = -ENOMEM;
+	struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+	struct wahc *wa = &hwahc->wa;
+	u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber;
+	u8 encryption_value;
+
+	/* Tell the host which key to use to talk to the device */
+	if (key) {
+		u8 key_idx = wusb_key_index(0, WUSB_KEY_INDEX_TYPE_PTK,
+					    WUSB_KEY_INDEX_ORIGINATOR_HOST);
+
+		result = __hwahc_dev_set_key(wusbhc, port_idx, tkid,
+					     key, key_size, key_idx);
+		if (result < 0)
+			goto error_set_key;
+		encryption_value = wusbhc->ccm1_etd->bEncryptionValue;
+	} else {
+		/* FIXME: this should come from wusbhc->etd[UNSECURE].value */
+		encryption_value = 0;
+	}
+
+	/* Set the encryption type for commmunicating with the device */
+	result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
+			USB_REQ_SET_ENCRYPTION,
+			USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+			encryption_value, port_idx << 8 | iface_no,
+			NULL, 0, 1000 /* FIXME: arbitrary */);
+	if (result < 0)
+		dev_err(wusbhc->dev, "Can't set host's WUSB encryption for "
+			"port index %u to %s (value %d): %d\n", port_idx,
+			wusb_et_name(wusbhc->ccm1_etd->bEncryptionType),
+			wusbhc->ccm1_etd->bEncryptionValue, result);
+error_set_key:
+	return result;
+}
+
+/*
+ * Set host's GTK key
+ */
+static int __hwahc_op_set_gtk(struct wusbhc *wusbhc, u32 tkid,
+			      const void *key, size_t key_size)
+{
+	u8 key_idx = wusb_key_index(0, WUSB_KEY_INDEX_TYPE_GTK,
+				    WUSB_KEY_INDEX_ORIGINATOR_HOST);
+
+	return __hwahc_dev_set_key(wusbhc, 0, tkid, key, key_size, key_idx);
+}
+
+/*
+ * Get the Wire Adapter class-specific descriptor
+ *
+ * NOTE: this descriptor comes with the big bundled configuration
+ *       descriptor that includes the interfaces' and endpoints', so
+ *       we just look for it in the cached copy kept by the USB stack.
+ *
+ * NOTE2: We convert LE fields to CPU order.
+ */
+static int wa_fill_descr(struct wahc *wa)
+{
+	int result;
+	struct device *dev = &wa->usb_iface->dev;
+	char *itr;
+	struct usb_device *usb_dev = wa->usb_dev;
+	struct usb_descriptor_header *hdr;
+	struct usb_wa_descriptor *wa_descr;
+	size_t itr_size, actconfig_idx;
+
+	actconfig_idx = (usb_dev->actconfig - usb_dev->config) /
+			sizeof(usb_dev->config[0]);
+	itr = usb_dev->rawdescriptors[actconfig_idx];
+	itr_size = le16_to_cpu(usb_dev->actconfig->desc.wTotalLength);
+	while (itr_size >= sizeof(*hdr)) {
+		hdr = (struct usb_descriptor_header *) itr;
+		d_printf(3, dev, "Extra device descriptor: "
+			 "type %02x/%u bytes @ %zu (%zu left)\n",
+			 hdr->bDescriptorType, hdr->bLength,
+			 (itr - usb_dev->rawdescriptors[actconfig_idx]),
+			 itr_size);
+		if (hdr->bDescriptorType == USB_DT_WIRE_ADAPTER)
+			goto found;
+		itr += hdr->bLength;
+		itr_size -= hdr->bLength;
+	}
+	dev_err(dev, "cannot find Wire Adapter Class descriptor\n");
+	return -ENODEV;
+
+found:
+	result = -EINVAL;
+	if (hdr->bLength > itr_size) {	/* is it available? */
+		dev_err(dev, "incomplete Wire Adapter Class descriptor "
+			"(%zu bytes left, %u needed)\n",
+			itr_size, hdr->bLength);
+		goto error;
+	}
+	if (hdr->bLength < sizeof(*wa->wa_descr)) {
+		dev_err(dev, "short Wire Adapter Class descriptor\n");
+		goto error;
+	}
+	wa->wa_descr = wa_descr = (struct usb_wa_descriptor *) hdr;
+	/* Make LE fields CPU order */
+	wa_descr->bcdWAVersion = le16_to_cpu(wa_descr->bcdWAVersion);
+	wa_descr->wNumRPipes = le16_to_cpu(wa_descr->wNumRPipes);
+	wa_descr->wRPipeMaxBlock = le16_to_cpu(wa_descr->wRPipeMaxBlock);
+	if (wa_descr->bcdWAVersion > 0x0100)
+		dev_warn(dev, "Wire Adapter v%d.%d newer than groked v1.0\n",
+			 wa_descr->bcdWAVersion & 0xff00 >> 8,
+			 wa_descr->bcdWAVersion & 0x00ff);
+	result = 0;
+error:
+	return result;
+}
+
+static struct hc_driver hwahc_hc_driver = {
+	.description = "hwa-hcd",
+	.product_desc = "Wireless USB HWA host controller",
+	.hcd_priv_size = sizeof(struct hwahc) - sizeof(struct usb_hcd),
+	.irq = NULL,			/* FIXME */
+	.flags = HCD_USB2,		/* FIXME */
+	.reset = hwahc_op_reset,
+	.start = hwahc_op_start,
+	.pci_suspend = hwahc_op_suspend,
+	.pci_resume = hwahc_op_resume,
+	.stop = hwahc_op_stop,
+	.get_frame_number = hwahc_op_get_frame_number,
+	.urb_enqueue = hwahc_op_urb_enqueue,
+	.urb_dequeue = hwahc_op_urb_dequeue,
+	.endpoint_disable = hwahc_op_endpoint_disable,
+
+	.hub_status_data = wusbhc_rh_status_data,
+	.hub_control = wusbhc_rh_control,
+	.bus_suspend = wusbhc_rh_suspend,
+	.bus_resume = wusbhc_rh_resume,
+	.start_port_reset = wusbhc_rh_start_port_reset,
+};
+
+static int hwahc_security_create(struct hwahc *hwahc)
+{
+	int result;
+	struct wusbhc *wusbhc = &hwahc->wusbhc;
+	struct usb_device *usb_dev = hwahc->wa.usb_dev;
+	struct device *dev = &usb_dev->dev;
+	struct usb_security_descriptor *secd;
+	struct usb_encryption_descriptor *etd;
+	void *itr, *top;
+	size_t itr_size, needed, bytes;
+	u8 index;
+	char buf[64];
+
+	/* Find the host's security descriptors in the config descr bundle */
+	index = (usb_dev->actconfig - usb_dev->config) /
+		sizeof(usb_dev->config[0]);
+	itr = usb_dev->rawdescriptors[index];
+	itr_size = le16_to_cpu(usb_dev->actconfig->desc.wTotalLength);
+	top = itr + itr_size;
+	result = __usb_get_extra_descriptor(usb_dev->rawdescriptors[index],
+			le16_to_cpu(usb_dev->actconfig->desc.wTotalLength),
+			USB_DT_SECURITY, (void **) &secd);
+	if (result == -1) {
+		dev_warn(dev, "BUG? WUSB host has no security descriptors\n");
+		return 0;
+	}
+	needed = sizeof(*secd);
+	if (top - (void *)secd < needed) {
+		dev_err(dev, "BUG? Not enough data to process security "
+			"descriptor header (%zu bytes left vs %zu needed)\n",
+			top - (void *) secd, needed);
+		return 0;
+	}
+	needed = le16_to_cpu(secd->wTotalLength);
+	if (top - (void *)secd < needed) {
+		dev_err(dev, "BUG? Not enough data to process security "
+			"descriptors (%zu bytes left vs %zu needed)\n",
+			top - (void *) secd, needed);
+		return 0;
+	}
+	/* Walk over the sec descriptors and store CCM1's on wusbhc */
+	itr = (void *) secd + sizeof(*secd);
+	top = (void *) secd + le16_to_cpu(secd->wTotalLength);
+	index = 0;
+	bytes = 0;
+	while (itr < top) {
+		etd = itr;
+		if (top - itr < sizeof(*etd)) {
+			dev_err(dev, "BUG: bad host security descriptor; "
+				"not enough data (%zu vs %zu left)\n",
+				top - itr, sizeof(*etd));
+			break;
+		}
+		if (etd->bLength < sizeof(*etd)) {
+			dev_err(dev, "BUG: bad host encryption descriptor; "
+				"descriptor is too short "
+				"(%zu vs %zu needed)\n",
+				(size_t)etd->bLength, sizeof(*etd));
+			break;
+		}
+		itr += etd->bLength;
+		bytes += snprintf(buf + bytes, sizeof(buf) - bytes,
+				  "%s (0x%02x) ",
+				  wusb_et_name(etd->bEncryptionType),
+				  etd->bEncryptionValue);
+		wusbhc->ccm1_etd = etd;
+	}
+	dev_info(dev, "supported encryption types: %s\n", buf);
+	if (wusbhc->ccm1_etd == NULL) {
+		dev_err(dev, "E: host doesn't support CCM-1 crypto\n");
+		return 0;
+	}
+	/* Pretty print what we support */
+	return 0;
+}
+
+static void hwahc_security_release(struct hwahc *hwahc)
+{
+	/* nothing to do here so far... */
+}
+
+static int hwahc_create(struct hwahc *hwahc, struct usb_interface *iface)
+{
+	int result;
+	struct device *dev = &iface->dev;
+	struct wusbhc *wusbhc = &hwahc->wusbhc;
+	struct wahc *wa = &hwahc->wa;
+	struct usb_device *usb_dev = interface_to_usbdev(iface);
+
+	wa->usb_dev = usb_get_dev(usb_dev);	/* bind the USB device */
+	wa->usb_iface = usb_get_intf(iface);
+	wusbhc->dev = dev;
+	wusbhc->uwb_rc = uwb_rc_get_by_grandpa(iface->dev.parent);
+	if (wusbhc->uwb_rc == NULL) {
+		result = -ENODEV;
+		dev_err(dev, "Cannot get associated UWB Host Controller\n");
+		goto error_rc_get;
+	}
+	result = wa_fill_descr(wa);	/* Get the device descriptor */
+	if (result < 0)
+		goto error_fill_descriptor;
+	if (wa->wa_descr->bNumPorts > USB_MAXCHILDREN) {
+		dev_err(dev, "FIXME: USB_MAXCHILDREN too low for WUSB "
+			"adapter (%u ports)\n", wa->wa_descr->bNumPorts);
+		wusbhc->ports_max = USB_MAXCHILDREN;
+	} else {
+		wusbhc->ports_max = wa->wa_descr->bNumPorts;
+	}
+	wusbhc->mmcies_max = wa->wa_descr->bNumMMCIEs;
+	wusbhc->start = __hwahc_op_wusbhc_start;
+	wusbhc->stop = __hwahc_op_wusbhc_stop;
+	wusbhc->mmcie_add = __hwahc_op_mmcie_add;
+	wusbhc->mmcie_rm = __hwahc_op_mmcie_rm;
+	wusbhc->dev_info_set = __hwahc_op_dev_info_set;
+	wusbhc->bwa_set = __hwahc_op_bwa_set;
+	wusbhc->set_num_dnts = __hwahc_op_set_num_dnts;
+	wusbhc->set_ptk = __hwahc_op_set_ptk;
+	wusbhc->set_gtk = __hwahc_op_set_gtk;
+	result = hwahc_security_create(hwahc);
+	if (result < 0) {
+		dev_err(dev, "Can't initialize security: %d\n", result);
+		goto error_security_create;
+	}
+	wa->wusb = wusbhc;	/* FIXME: ugly, need to fix */
+	result = wusbhc_create(&hwahc->wusbhc);
+	if (result < 0) {
+		dev_err(dev, "Can't create WUSB HC structures: %d\n", result);
+		goto error_wusbhc_create;
+	}
+	result = wa_create(&hwahc->wa, iface);
+	if (result < 0)
+		goto error_wa_create;
+	return 0;
+
+error_wa_create:
+	wusbhc_destroy(&hwahc->wusbhc);
+error_wusbhc_create:
+	/* WA Descr fill allocs no resources */
+error_security_create:
+error_fill_descriptor:
+	uwb_rc_put(wusbhc->uwb_rc);
+error_rc_get:
+	usb_put_intf(iface);
+	usb_put_dev(usb_dev);
+	return result;
+}
+
+static void hwahc_destroy(struct hwahc *hwahc)
+{
+	struct wusbhc *wusbhc = &hwahc->wusbhc;
+
+	d_fnstart(1, NULL, "(hwahc %p)\n", hwahc);
+	mutex_lock(&wusbhc->mutex);
+	__wa_destroy(&hwahc->wa);
+	wusbhc_destroy(&hwahc->wusbhc);
+	hwahc_security_release(hwahc);
+	hwahc->wusbhc.dev = NULL;
+	uwb_rc_put(wusbhc->uwb_rc);
+	usb_put_intf(hwahc->wa.usb_iface);
+	usb_put_dev(hwahc->wa.usb_dev);
+	mutex_unlock(&wusbhc->mutex);
+	d_fnend(1, NULL, "(hwahc %p) = void\n", hwahc);
+}
+
+static void hwahc_init(struct hwahc *hwahc)
+{
+	wa_init(&hwahc->wa);
+}
+
+static int hwahc_probe(struct usb_interface *usb_iface,
+		       const struct usb_device_id *id)
+{
+	int result;
+	struct usb_hcd *usb_hcd;
+	struct wusbhc *wusbhc;
+	struct hwahc *hwahc;
+	struct device *dev = &usb_iface->dev;
+
+	d_fnstart(4, dev, "(%p, %p)\n", usb_iface, id);
+	result = -ENOMEM;
+	usb_hcd = usb_create_hcd(&hwahc_hc_driver, &usb_iface->dev, "wusb-hwa");
+	if (usb_hcd == NULL) {
+		dev_err(dev, "unable to allocate instance\n");
+		goto error_alloc;
+	}
+	usb_hcd->wireless = 1;
+	usb_hcd->flags |= HCD_FLAG_SAW_IRQ;
+	wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+	hwahc_init(hwahc);
+	result = hwahc_create(hwahc, usb_iface);
+	if (result < 0) {
+		dev_err(dev, "Cannot initialize internals: %d\n", result);
+		goto error_hwahc_create;
+	}
+	result = usb_add_hcd(usb_hcd, 0, 0);
+	if (result < 0) {
+		dev_err(dev, "Cannot add HCD: %d\n", result);
+		goto error_add_hcd;
+	}
+	result = wusbhc_b_create(&hwahc->wusbhc);
+	if (result < 0) {
+		dev_err(dev, "Cannot setup phase B of WUSBHC: %d\n", result);
+		goto error_wusbhc_b_create;
+	}
+	d_fnend(4, dev, "(%p, %p) = 0\n", usb_iface, id);
+	return 0;
+
+error_wusbhc_b_create:
+	usb_remove_hcd(usb_hcd);
+error_add_hcd:
+	hwahc_destroy(hwahc);
+error_hwahc_create:
+	usb_put_hcd(usb_hcd);
+error_alloc:
+	d_fnend(4, dev, "(%p, %p) = %d\n", usb_iface, id, result);
+	return result;
+}
+
+static void hwahc_disconnect(struct usb_interface *usb_iface)
+{
+	struct usb_hcd *usb_hcd;
+	struct wusbhc *wusbhc;
+	struct hwahc *hwahc;
+
+	usb_hcd = usb_get_intfdata(usb_iface);
+	wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	hwahc = container_of(wusbhc, struct hwahc, wusbhc);
+
+	d_fnstart(1, NULL, "(hwahc %p [usb_iface %p])\n", hwahc, usb_iface);
+	wusbhc_b_destroy(&hwahc->wusbhc);
+	usb_remove_hcd(usb_hcd);
+	hwahc_destroy(hwahc);
+	usb_put_hcd(usb_hcd);
+	d_fnend(1, NULL, "(hwahc %p [usb_iface %p]) = void\n", hwahc,
+		usb_iface);
+}
+
+/** USB device ID's that we handle */
+static struct usb_device_id hwahc_id_table[] = {
+	/* FIXME: use class labels for this */
+	{ USB_INTERFACE_INFO(0xe0, 0x02, 0x01), },
+	{},
+};
+MODULE_DEVICE_TABLE(usb, hwahc_id_table);
+
+static struct usb_driver hwahc_driver = {
+	.name =		"hwa-hc",
+	.probe =	hwahc_probe,
+	.disconnect =	hwahc_disconnect,
+	.id_table =	hwahc_id_table,
+};
+
+static int __init hwahc_driver_init(void)
+{
+	int result;
+	result = usb_register(&hwahc_driver);
+	if (result < 0) {
+		printk(KERN_ERR "WA-CDS: Cannot register USB driver: %d\n",
+		       result);
+		goto error_usb_register;
+	}
+	return 0;
+
+error_usb_register:
+	return result;
+
+}
+module_init(hwahc_driver_init);
+
+static void __exit hwahc_driver_exit(void)
+{
+	usb_deregister(&hwahc_driver);
+}
+module_exit(hwahc_driver_exit);
+
+
+MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>");
+MODULE_DESCRIPTION("Host Wired Adapter USB Host Control Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/whci/Kbuild b/drivers/usb/host/whci/Kbuild
new file mode 100644
index 0000000..26a3871
--- /dev/null
+++ b/drivers/usb/host/whci/Kbuild
@@ -0,0 +1,11 @@
+obj-$(CONFIG_USB_WHCI_HCD) += whci-hcd.o
+
+whci-hcd-y := \
+	asl.o	\
+	hcd.o 	\
+	hw.o	\
+	init.o	\
+	int.o	\
+	pzl.o	\
+	qset.o	\
+	wusb.o
diff --git a/drivers/usb/host/whci/asl.c b/drivers/usb/host/whci/asl.c
new file mode 100644
index 0000000..4d7078e5
--- /dev/null
+++ b/drivers/usb/host/whci/asl.c
@@ -0,0 +1,367 @@
+/*
+ * Wireless Host Controller (WHC) asynchronous schedule management.
+ *
+ * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/kernel.h>
+#include <linux/dma-mapping.h>
+#include <linux/uwb/umc.h>
+#include <linux/usb.h>
+#define D_LOCAL 0
+#include <linux/uwb/debug.h>
+
+#include "../../wusbcore/wusbhc.h"
+
+#include "whcd.h"
+
+#if D_LOCAL >= 4
+static void dump_asl(struct whc *whc, const char *tag)
+{
+	struct device *dev = &whc->umc->dev;
+	struct whc_qset *qset;
+
+	d_printf(4, dev, "ASL %s\n", tag);
+
+	list_for_each_entry(qset, &whc->async_list, list_node) {
+		dump_qset(qset, dev);
+	}
+}
+#else
+static inline void dump_asl(struct whc *whc, const char *tag)
+{
+}
+#endif
+
+
+static void qset_get_next_prev(struct whc *whc, struct whc_qset *qset,
+			       struct whc_qset **next, struct whc_qset **prev)
+{
+	struct list_head *n, *p;
+
+	BUG_ON(list_empty(&whc->async_list));
+
+	n = qset->list_node.next;
+	if (n == &whc->async_list)
+		n = n->next;
+	p = qset->list_node.prev;
+	if (p == &whc->async_list)
+		p = p->prev;
+
+	*next = container_of(n, struct whc_qset, list_node);
+	*prev = container_of(p, struct whc_qset, list_node);
+
+}
+
+static void asl_qset_insert_begin(struct whc *whc, struct whc_qset *qset)
+{
+	list_move(&qset->list_node, &whc->async_list);
+	qset->in_sw_list = true;
+}
+
+static void asl_qset_insert(struct whc *whc, struct whc_qset *qset)
+{
+	struct whc_qset *next, *prev;
+
+	qset_clear(whc, qset);
+
+	/* Link into ASL. */
+	qset_get_next_prev(whc, qset, &next, &prev);
+	whc_qset_set_link_ptr(&qset->qh.link, next->qset_dma);
+	whc_qset_set_link_ptr(&prev->qh.link, qset->qset_dma);
+	qset->in_hw_list = true;
+}
+
+static void asl_qset_remove(struct whc *whc, struct whc_qset *qset)
+{
+	struct whc_qset *prev, *next;
+
+	qset_get_next_prev(whc, qset, &next, &prev);
+
+	list_move(&qset->list_node, &whc->async_removed_list);
+	qset->in_sw_list = false;
+
+	/*
+	 * No more qsets in the ASL?  The caller must stop the ASL as
+	 * it's no longer valid.
+	 */
+	if (list_empty(&whc->async_list))
+		return;
+
+	/* Remove from ASL. */
+	whc_qset_set_link_ptr(&prev->qh.link, next->qset_dma);
+	qset->in_hw_list = false;
+}
+
+/**
+ * process_qset - process any recently inactivated or halted qTDs in a
+ * qset.
+ *
+ * After inactive qTDs are removed, new qTDs can be added if the
+ * urb queue still contains URBs.
+ *
+ * Returns any additional WUSBCMD bits for the ASL sync command (i.e.,
+ * WUSBCMD_ASYNC_QSET_RM if a halted qset was removed).
+ */
+static uint32_t process_qset(struct whc *whc, struct whc_qset *qset)
+{
+	enum whc_update update = 0;
+	uint32_t status = 0;
+
+	while (qset->ntds) {
+		struct whc_qtd *td;
+		int t;
+
+		t = qset->td_start;
+		td = &qset->qtd[qset->td_start];
+		status = le32_to_cpu(td->status);
+
+		/*
+		 * Nothing to do with a still active qTD.
+		 */
+		if (status & QTD_STS_ACTIVE)
+			break;
+
+		if (status & QTD_STS_HALTED) {
+			/* Ug, an error. */
+			process_halted_qtd(whc, qset, td);
+			goto done;
+		}
+
+		/* Mmm, a completed qTD. */
+		process_inactive_qtd(whc, qset, td);
+	}
+
+	update |= qset_add_qtds(whc, qset);
+
+done:
+	/*
+	 * Remove this qset from the ASL if requested, but only if has
+	 * no qTDs.
+	 */
+	if (qset->remove && qset->ntds == 0) {
+		asl_qset_remove(whc, qset);
+		update |= WHC_UPDATE_REMOVED;
+	}
+	return update;
+}
+
+void asl_start(struct whc *whc)
+{
+	struct whc_qset *qset;
+
+	qset = list_first_entry(&whc->async_list, struct whc_qset, list_node);
+
+	le_writeq(qset->qset_dma | QH_LINK_NTDS(8), whc->base + WUSBASYNCLISTADDR);
+
+	whc_write_wusbcmd(whc, WUSBCMD_ASYNC_EN, WUSBCMD_ASYNC_EN);
+	whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS,
+		      WUSBSTS_ASYNC_SCHED, WUSBSTS_ASYNC_SCHED,
+		      1000, "start ASL");
+}
+
+void asl_stop(struct whc *whc)
+{
+	whc_write_wusbcmd(whc, WUSBCMD_ASYNC_EN, 0);
+	whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS,
+		      WUSBSTS_ASYNC_SCHED, 0,
+		      1000, "stop ASL");
+}
+
+void asl_update(struct whc *whc, uint32_t wusbcmd)
+{
+	whc_write_wusbcmd(whc, wusbcmd, wusbcmd);
+	wait_event(whc->async_list_wq,
+		   (le_readl(whc->base + WUSBCMD) & WUSBCMD_ASYNC_UPDATED) == 0);
+}
+
+/**
+ * scan_async_work - scan the ASL for qsets to process.
+ *
+ * Process each qset in the ASL in turn and then signal the WHC that
+ * the ASL has been updated.
+ *
+ * Then start, stop or update the asynchronous schedule as required.
+ */
+void scan_async_work(struct work_struct *work)
+{
+	struct whc *whc = container_of(work, struct whc, async_work);
+	struct whc_qset *qset, *t;
+	enum whc_update update = 0;
+
+	spin_lock_irq(&whc->lock);
+
+	dump_asl(whc, "before processing");
+
+	/*
+	 * Transerve the software list backwards so new qsets can be
+	 * safely inserted into the ASL without making it non-circular.
+	 */
+	list_for_each_entry_safe_reverse(qset, t, &whc->async_list, list_node) {
+		if (!qset->in_hw_list) {
+			asl_qset_insert(whc, qset);
+			update |= WHC_UPDATE_ADDED;
+		}
+
+		update |= process_qset(whc, qset);
+	}
+
+	dump_asl(whc, "after processing");
+
+	spin_unlock_irq(&whc->lock);
+
+	if (update) {
+		uint32_t wusbcmd = WUSBCMD_ASYNC_UPDATED | WUSBCMD_ASYNC_SYNCED_DB;
+		if (update & WHC_UPDATE_REMOVED)
+			wusbcmd |= WUSBCMD_ASYNC_QSET_RM;
+		asl_update(whc, wusbcmd);
+	}
+
+	/*
+	 * Now that the ASL is updated, complete the removal of any
+	 * removed qsets.
+	 */
+	spin_lock(&whc->lock);
+
+	list_for_each_entry_safe(qset, t, &whc->async_removed_list, list_node) {
+		qset_remove_complete(whc, qset);
+	}
+
+	spin_unlock(&whc->lock);
+}
+
+/**
+ * asl_urb_enqueue - queue an URB onto the asynchronous list (ASL).
+ * @whc: the WHCI host controller
+ * @urb: the URB to enqueue
+ * @mem_flags: flags for any memory allocations
+ *
+ * The qset for the endpoint is obtained and the urb queued on to it.
+ *
+ * Work is scheduled to update the hardware's view of the ASL.
+ */
+int asl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags)
+{
+	struct whc_qset *qset;
+	int err;
+	unsigned long flags;
+
+	spin_lock_irqsave(&whc->lock, flags);
+
+	qset = get_qset(whc, urb, GFP_ATOMIC);
+	if (qset == NULL)
+		err = -ENOMEM;
+	else
+		err = qset_add_urb(whc, qset, urb, GFP_ATOMIC);
+	if (!err) {
+		usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb);
+		if (!qset->in_sw_list)
+			asl_qset_insert_begin(whc, qset);
+	}
+
+	spin_unlock_irqrestore(&whc->lock, flags);
+
+	if (!err)
+		queue_work(whc->workqueue, &whc->async_work);
+
+	return 0;
+}
+
+/**
+ * asl_urb_dequeue - remove an URB (qset) from the async list.
+ * @whc: the WHCI host controller
+ * @urb: the URB to dequeue
+ * @status: the current status of the URB
+ *
+ * URBs that do yet have qTDs can simply be removed from the software
+ * queue, otherwise the qset must be removed from the ASL so the qTDs
+ * can be removed.
+ */
+int asl_urb_dequeue(struct whc *whc, struct urb *urb, int status)
+{
+	struct whc_urb *wurb = urb->hcpriv;
+	struct whc_qset *qset = wurb->qset;
+	struct whc_std *std, *t;
+	int ret;
+	unsigned long flags;
+
+	spin_lock_irqsave(&whc->lock, flags);
+
+	ret = usb_hcd_check_unlink_urb(&whc->wusbhc.usb_hcd, urb, status);
+	if (ret < 0)
+		goto out;
+
+	list_for_each_entry_safe(std, t, &qset->stds, list_node) {
+		if (std->urb == urb)
+			qset_free_std(whc, std);
+		else
+			std->qtd = NULL; /* so this std is re-added when the qset is */
+	}
+
+	asl_qset_remove(whc, qset);
+	wurb->status = status;
+	wurb->is_async = true;
+	queue_work(whc->workqueue, &wurb->dequeue_work);
+
+out:
+	spin_unlock_irqrestore(&whc->lock, flags);
+
+	return ret;
+}
+
+/**
+ * asl_qset_delete - delete a qset from the ASL
+ */
+void asl_qset_delete(struct whc *whc, struct whc_qset *qset)
+{
+	qset->remove = 1;
+	queue_work(whc->workqueue, &whc->async_work);
+	qset_delete(whc, qset);
+}
+
+/**
+ * asl_init - initialize the asynchronous schedule list
+ *
+ * A dummy qset with no qTDs is added to the ASL to simplify removing
+ * qsets (no need to stop the ASL when the last qset is removed).
+ */
+int asl_init(struct whc *whc)
+{
+	struct whc_qset *qset;
+
+	qset = qset_alloc(whc, GFP_KERNEL);
+	if (qset == NULL)
+		return -ENOMEM;
+
+	asl_qset_insert_begin(whc, qset);
+	asl_qset_insert(whc, qset);
+
+	return 0;
+}
+
+/**
+ * asl_clean_up - free ASL resources
+ *
+ * The ASL is stopped and empty except for the dummy qset.
+ */
+void asl_clean_up(struct whc *whc)
+{
+	struct whc_qset *qset;
+
+	if (!list_empty(&whc->async_list)) {
+		qset = list_first_entry(&whc->async_list, struct whc_qset, list_node);
+		list_del(&qset->list_node);
+		qset_free(whc, qset);
+	}
+}
diff --git a/drivers/usb/host/whci/hcd.c b/drivers/usb/host/whci/hcd.c
new file mode 100644
index 0000000..ef3ad4d
--- /dev/null
+++ b/drivers/usb/host/whci/hcd.c
@@ -0,0 +1,339 @@
+/*
+ * Wireless Host Controller (WHC) driver.
+ *
+ * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/uwb/umc.h>
+
+#include "../../wusbcore/wusbhc.h"
+
+#include "whcd.h"
+
+/*
+ * One time initialization.
+ *
+ * Nothing to do here.
+ */
+static int whc_reset(struct usb_hcd *usb_hcd)
+{
+	return 0;
+}
+
+/*
+ * Start the wireless host controller.
+ *
+ * Start device notification.
+ *
+ * Put hc into run state, set DNTS parameters.
+ */
+static int whc_start(struct usb_hcd *usb_hcd)
+{
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	struct whc *whc = wusbhc_to_whc(wusbhc);
+	u8 bcid;
+	int ret;
+
+	mutex_lock(&wusbhc->mutex);
+
+	le_writel(WUSBINTR_GEN_CMD_DONE
+		  | WUSBINTR_HOST_ERR
+		  | WUSBINTR_ASYNC_SCHED_SYNCED
+		  | WUSBINTR_DNTS_INT
+		  | WUSBINTR_ERR_INT
+		  | WUSBINTR_INT,
+		  whc->base + WUSBINTR);
+
+	/* set cluster ID */
+	bcid = wusb_cluster_id_get();
+	ret = whc_set_cluster_id(whc, bcid);
+	if (ret < 0)
+		goto out;
+	wusbhc->cluster_id = bcid;
+
+	/* start HC */
+	whc_write_wusbcmd(whc, WUSBCMD_RUN, WUSBCMD_RUN);
+
+	usb_hcd->uses_new_polling = 1;
+	usb_hcd->poll_rh = 1;
+	usb_hcd->state = HC_STATE_RUNNING;
+
+out:
+	mutex_unlock(&wusbhc->mutex);
+	return ret;
+}
+
+
+/*
+ * Stop the wireless host controller.
+ *
+ * Stop device notification.
+ *
+ * Wait for pending transfer to stop? Put hc into stop state?
+ */
+static void whc_stop(struct usb_hcd *usb_hcd)
+{
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	struct whc *whc = wusbhc_to_whc(wusbhc);
+
+	mutex_lock(&wusbhc->mutex);
+
+	wusbhc_stop(wusbhc);
+
+	/* stop HC */
+	le_writel(0, whc->base + WUSBINTR);
+	whc_write_wusbcmd(whc, WUSBCMD_RUN, 0);
+	whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS,
+		      WUSBSTS_HCHALTED, WUSBSTS_HCHALTED,
+		      100, "HC to halt");
+
+	wusb_cluster_id_put(wusbhc->cluster_id);
+
+	mutex_unlock(&wusbhc->mutex);
+}
+
+static int whc_get_frame_number(struct usb_hcd *usb_hcd)
+{
+	/* Frame numbers are not applicable to WUSB. */
+	return -ENOSYS;
+}
+
+
+/*
+ * Queue an URB to the ASL or PZL
+ */
+static int whc_urb_enqueue(struct usb_hcd *usb_hcd, struct urb *urb,
+			   gfp_t mem_flags)
+{
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	struct whc *whc = wusbhc_to_whc(wusbhc);
+	int ret;
+
+	switch (usb_pipetype(urb->pipe)) {
+	case PIPE_INTERRUPT:
+		ret = pzl_urb_enqueue(whc, urb, mem_flags);
+		break;
+	case PIPE_ISOCHRONOUS:
+		dev_err(&whc->umc->dev, "isochronous transfers unsupported\n");
+		ret = -ENOTSUPP;
+		break;
+	case PIPE_CONTROL:
+	case PIPE_BULK:
+	default:
+		ret = asl_urb_enqueue(whc, urb, mem_flags);
+		break;
+	};
+
+	return ret;
+}
+
+/*
+ * Remove a queued URB from the ASL or PZL.
+ */
+static int whc_urb_dequeue(struct usb_hcd *usb_hcd, struct urb *urb, int status)
+{
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	struct whc *whc = wusbhc_to_whc(wusbhc);
+	int ret;
+
+	switch (usb_pipetype(urb->pipe)) {
+	case PIPE_INTERRUPT:
+		ret = pzl_urb_dequeue(whc, urb, status);
+		break;
+	case PIPE_ISOCHRONOUS:
+		ret = -ENOTSUPP;
+		break;
+	case PIPE_CONTROL:
+	case PIPE_BULK:
+	default:
+		ret = asl_urb_dequeue(whc, urb, status);
+		break;
+	};
+
+	return ret;
+}
+
+/*
+ * Wait for all URBs to the endpoint to be completed, then delete the
+ * qset.
+ */
+static void whc_endpoint_disable(struct usb_hcd *usb_hcd,
+				 struct usb_host_endpoint *ep)
+{
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	struct whc *whc = wusbhc_to_whc(wusbhc);
+	struct whc_qset *qset;
+
+	qset = ep->hcpriv;
+	if (qset) {
+		ep->hcpriv = NULL;
+		if (usb_endpoint_xfer_bulk(&ep->desc)
+		    || usb_endpoint_xfer_control(&ep->desc))
+			asl_qset_delete(whc, qset);
+		else
+			pzl_qset_delete(whc, qset);
+	}
+}
+
+static struct hc_driver whc_hc_driver = {
+	.description = "whci-hcd",
+	.product_desc = "Wireless host controller",
+	.hcd_priv_size = sizeof(struct whc) - sizeof(struct usb_hcd),
+	.irq = whc_int_handler,
+	.flags = HCD_USB2,
+
+	.reset = whc_reset,
+	.start = whc_start,
+	.stop = whc_stop,
+	.get_frame_number = whc_get_frame_number,
+	.urb_enqueue = whc_urb_enqueue,
+	.urb_dequeue = whc_urb_dequeue,
+	.endpoint_disable = whc_endpoint_disable,
+
+	.hub_status_data = wusbhc_rh_status_data,
+	.hub_control = wusbhc_rh_control,
+	.bus_suspend = wusbhc_rh_suspend,
+	.bus_resume = wusbhc_rh_resume,
+	.start_port_reset = wusbhc_rh_start_port_reset,
+};
+
+static int whc_probe(struct umc_dev *umc)
+{
+	int ret = -ENOMEM;
+	struct usb_hcd *usb_hcd;
+	struct wusbhc *wusbhc = NULL;
+	struct whc *whc = NULL;
+	struct device *dev = &umc->dev;
+
+	usb_hcd = usb_create_hcd(&whc_hc_driver, dev, "whci");
+	if (usb_hcd == NULL) {
+		dev_err(dev, "unable to create hcd\n");
+		goto error;
+	}
+
+	usb_hcd->wireless = 1;
+
+	wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	whc = wusbhc_to_whc(wusbhc);
+	whc->umc = umc;
+
+	ret = whc_init(whc);
+	if (ret)
+		goto error;
+
+	wusbhc->dev = dev;
+	wusbhc->uwb_rc = uwb_rc_get_by_grandpa(umc->dev.parent);
+	if (!wusbhc->uwb_rc) {
+		ret = -ENODEV;
+		dev_err(dev, "cannot get radio controller\n");
+		goto error;
+	}
+
+	if (whc->n_devices > USB_MAXCHILDREN) {
+		dev_warn(dev, "USB_MAXCHILDREN too low for WUSB adapter (%u ports)\n",
+			 whc->n_devices);
+		wusbhc->ports_max = USB_MAXCHILDREN;
+	} else
+		wusbhc->ports_max = whc->n_devices;
+	wusbhc->mmcies_max      = whc->n_mmc_ies;
+	wusbhc->start           = whc_wusbhc_start;
+	wusbhc->stop            = whc_wusbhc_stop;
+	wusbhc->mmcie_add       = whc_mmcie_add;
+	wusbhc->mmcie_rm        = whc_mmcie_rm;
+	wusbhc->dev_info_set    = whc_dev_info_set;
+	wusbhc->bwa_set         = whc_bwa_set;
+	wusbhc->set_num_dnts    = whc_set_num_dnts;
+	wusbhc->set_ptk         = whc_set_ptk;
+	wusbhc->set_gtk         = whc_set_gtk;
+
+	ret = wusbhc_create(wusbhc);
+	if (ret)
+		goto error_wusbhc_create;
+
+	ret = usb_add_hcd(usb_hcd, whc->umc->irq, IRQF_SHARED);
+	if (ret) {
+		dev_err(dev, "cannot add HCD: %d\n", ret);
+		goto error_usb_add_hcd;
+	}
+
+	ret = wusbhc_b_create(wusbhc);
+	if (ret) {
+		dev_err(dev, "WUSBHC phase B setup failed: %d\n", ret);
+		goto error_wusbhc_b_create;
+	}
+
+	return 0;
+
+error_wusbhc_b_create:
+	usb_remove_hcd(usb_hcd);
+error_usb_add_hcd:
+	wusbhc_destroy(wusbhc);
+error_wusbhc_create:
+	uwb_rc_put(wusbhc->uwb_rc);
+error:
+	whc_clean_up(whc);
+	if (usb_hcd)
+		usb_put_hcd(usb_hcd);
+	return ret;
+}
+
+
+static void whc_remove(struct umc_dev *umc)
+{
+	struct usb_hcd *usb_hcd = dev_get_drvdata(&umc->dev);
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	struct whc *whc = wusbhc_to_whc(wusbhc);
+
+	if (usb_hcd) {
+		wusbhc_b_destroy(wusbhc);
+		usb_remove_hcd(usb_hcd);
+		wusbhc_destroy(wusbhc);
+		uwb_rc_put(wusbhc->uwb_rc);
+		whc_clean_up(whc);
+		usb_put_hcd(usb_hcd);
+	}
+}
+
+static struct umc_driver whci_hc_driver = {
+	.name =		"whci-hcd",
+	.cap_id =       UMC_CAP_ID_WHCI_WUSB_HC,
+	.probe =	whc_probe,
+	.remove =	whc_remove,
+};
+
+static int __init whci_hc_driver_init(void)
+{
+	return umc_driver_register(&whci_hc_driver);
+}
+module_init(whci_hc_driver_init);
+
+static void __exit whci_hc_driver_exit(void)
+{
+	umc_driver_unregister(&whci_hc_driver);
+}
+module_exit(whci_hc_driver_exit);
+
+/* PCI device ID's that we handle (so it gets loaded) */
+static struct pci_device_id whci_hcd_id_table[] = {
+	{ PCI_DEVICE_CLASS(PCI_CLASS_WIRELESS_WHCI, ~0) },
+	{ /* empty last entry */ }
+};
+MODULE_DEVICE_TABLE(pci, whci_hcd_id_table);
+
+MODULE_DESCRIPTION("WHCI Wireless USB host controller driver");
+MODULE_AUTHOR("Cambridge Silicon Radio Ltd.");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/whci/hw.c b/drivers/usb/host/whci/hw.c
new file mode 100644
index 0000000..ac86e59
--- /dev/null
+++ b/drivers/usb/host/whci/hw.c
@@ -0,0 +1,87 @@
+/*
+ * Wireless Host Controller (WHC) hardware access helpers.
+ *
+ * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/kernel.h>
+#include <linux/dma-mapping.h>
+#include <linux/uwb/umc.h>
+
+#include "../../wusbcore/wusbhc.h"
+
+#include "whcd.h"
+
+void whc_write_wusbcmd(struct whc *whc, u32 mask, u32 val)
+{
+	unsigned long flags;
+	u32 cmd;
+
+	spin_lock_irqsave(&whc->lock, flags);
+
+	cmd = le_readl(whc->base + WUSBCMD);
+	cmd = (cmd & ~mask) | val;
+	le_writel(cmd, whc->base + WUSBCMD);
+
+	spin_unlock_irqrestore(&whc->lock, flags);
+}
+
+/**
+ * whc_do_gencmd - start a generic command via the WUSBGENCMDSTS register
+ * @whc:    the WHCI HC
+ * @cmd:    command to start.
+ * @params: parameters for the command (the WUSBGENCMDPARAMS register value).
+ * @addr:   pointer to any data for the command (may be NULL).
+ * @len:    length of the data (if any).
+ */
+int whc_do_gencmd(struct whc *whc, u32 cmd, u32 params, void *addr, size_t len)
+{
+	unsigned long flags;
+	dma_addr_t dma_addr;
+	int t;
+
+	mutex_lock(&whc->mutex);
+
+	/* Wait for previous command to complete. */
+	t = wait_event_timeout(whc->cmd_wq,
+			       (le_readl(whc->base + WUSBGENCMDSTS) & WUSBGENCMDSTS_ACTIVE) == 0,
+			       WHC_GENCMD_TIMEOUT_MS);
+	if (t == 0) {
+		dev_err(&whc->umc->dev, "generic command timeout (%04x/%04x)\n",
+			le_readl(whc->base + WUSBGENCMDSTS),
+			le_readl(whc->base + WUSBGENCMDPARAMS));
+		return -ETIMEDOUT;
+	}
+
+	if (addr) {
+		memcpy(whc->gen_cmd_buf, addr, len);
+		dma_addr = whc->gen_cmd_buf_dma;
+	} else
+		dma_addr = 0;
+
+	/* Poke registers to start cmd. */
+	spin_lock_irqsave(&whc->lock, flags);
+
+	le_writel(params, whc->base + WUSBGENCMDPARAMS);
+	le_writeq(dma_addr, whc->base + WUSBGENADDR);
+
+	le_writel(WUSBGENCMDSTS_ACTIVE | WUSBGENCMDSTS_IOC | cmd,
+		  whc->base + WUSBGENCMDSTS);
+
+	spin_unlock_irqrestore(&whc->lock, flags);
+
+	mutex_unlock(&whc->mutex);
+
+	return 0;
+}
diff --git a/drivers/usb/host/whci/init.c b/drivers/usb/host/whci/init.c
new file mode 100644
index 0000000..34a783c
--- /dev/null
+++ b/drivers/usb/host/whci/init.c
@@ -0,0 +1,188 @@
+/*
+ * Wireless Host Controller (WHC) initialization.
+ *
+ * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/kernel.h>
+#include <linux/dma-mapping.h>
+#include <linux/uwb/umc.h>
+
+#include "../../wusbcore/wusbhc.h"
+
+#include "whcd.h"
+
+/*
+ * Reset the host controller.
+ */
+static void whc_hw_reset(struct whc *whc)
+{
+	le_writel(WUSBCMD_WHCRESET, whc->base + WUSBCMD);
+	whci_wait_for(&whc->umc->dev, whc->base + WUSBCMD, WUSBCMD_WHCRESET, 0,
+		      100, "reset");
+}
+
+static void whc_hw_init_di_buf(struct whc *whc)
+{
+	int d;
+
+	/* Disable all entries in the Device Information buffer. */
+	for (d = 0; d < whc->n_devices; d++)
+		whc->di_buf[d].addr_sec_info = WHC_DI_DISABLE;
+
+	le_writeq(whc->di_buf_dma, whc->base + WUSBDEVICEINFOADDR);
+}
+
+static void whc_hw_init_dn_buf(struct whc *whc)
+{
+	/* Clear the Device Notification buffer to ensure the V (valid)
+	 * bits are clear.  */
+	memset(whc->dn_buf, 0, 4096);
+
+	le_writeq(whc->dn_buf_dma, whc->base + WUSBDNTSBUFADDR);
+}
+
+int whc_init(struct whc *whc)
+{
+	u32 whcsparams;
+	int ret, i;
+	resource_size_t start, len;
+
+	spin_lock_init(&whc->lock);
+	mutex_init(&whc->mutex);
+	init_waitqueue_head(&whc->cmd_wq);
+	init_waitqueue_head(&whc->async_list_wq);
+	init_waitqueue_head(&whc->periodic_list_wq);
+	whc->workqueue = create_singlethread_workqueue(dev_name(&whc->umc->dev));
+	if (whc->workqueue == NULL) {
+		ret = -ENOMEM;
+		goto error;
+	}
+	INIT_WORK(&whc->dn_work, whc_dn_work);
+
+	INIT_WORK(&whc->async_work, scan_async_work);
+	INIT_LIST_HEAD(&whc->async_list);
+	INIT_LIST_HEAD(&whc->async_removed_list);
+
+	INIT_WORK(&whc->periodic_work, scan_periodic_work);
+	for (i = 0; i < 5; i++)
+		INIT_LIST_HEAD(&whc->periodic_list[i]);
+	INIT_LIST_HEAD(&whc->periodic_removed_list);
+
+	/* Map HC registers. */
+	start = whc->umc->resource.start;
+	len   = whc->umc->resource.end - start + 1;
+	if (!request_mem_region(start, len, "whci-hc")) {
+		dev_err(&whc->umc->dev, "can't request HC region\n");
+		ret = -EBUSY;
+		goto error;
+	}
+	whc->base_phys = start;
+	whc->base = ioremap(start, len);
+	if (!whc->base) {
+		dev_err(&whc->umc->dev, "ioremap\n");
+		ret = -ENOMEM;
+		goto error;
+	}
+
+	whc_hw_reset(whc);
+
+	/* Read maximum number of devices, keys and MMC IEs. */
+	whcsparams = le_readl(whc->base + WHCSPARAMS);
+	whc->n_devices = WHCSPARAMS_TO_N_DEVICES(whcsparams);
+	whc->n_keys    = WHCSPARAMS_TO_N_KEYS(whcsparams);
+	whc->n_mmc_ies = WHCSPARAMS_TO_N_MMC_IES(whcsparams);
+
+	dev_dbg(&whc->umc->dev, "N_DEVICES = %d, N_KEYS = %d, N_MMC_IES = %d\n",
+		whc->n_devices, whc->n_keys, whc->n_mmc_ies);
+
+	whc->qset_pool = dma_pool_create("qset", &whc->umc->dev,
+					 sizeof(struct whc_qset), 64, 0);
+	if (whc->qset_pool == NULL) {
+		ret = -ENOMEM;
+		goto error;
+	}
+
+	ret = asl_init(whc);
+	if (ret < 0)
+		goto error;
+	ret = pzl_init(whc);
+	if (ret < 0)
+		goto error;
+
+	/* Allocate and initialize a buffer for generic commands, the
+	   Device Information buffer, and the Device Notification
+	   buffer. */
+
+	whc->gen_cmd_buf = dma_alloc_coherent(&whc->umc->dev, WHC_GEN_CMD_DATA_LEN,
+					      &whc->gen_cmd_buf_dma, GFP_KERNEL);
+	if (whc->gen_cmd_buf == NULL) {
+		ret = -ENOMEM;
+		goto error;
+	}
+
+	whc->dn_buf = dma_alloc_coherent(&whc->umc->dev,
+					 sizeof(struct dn_buf_entry) * WHC_N_DN_ENTRIES,
+					 &whc->dn_buf_dma, GFP_KERNEL);
+	if (!whc->dn_buf) {
+		ret = -ENOMEM;
+		goto error;
+	}
+	whc_hw_init_dn_buf(whc);
+
+	whc->di_buf = dma_alloc_coherent(&whc->umc->dev,
+					 sizeof(struct di_buf_entry) * whc->n_devices,
+					 &whc->di_buf_dma, GFP_KERNEL);
+	if (!whc->di_buf) {
+		ret = -ENOMEM;
+		goto error;
+	}
+	whc_hw_init_di_buf(whc);
+
+	return 0;
+
+error:
+	whc_clean_up(whc);
+	return ret;
+}
+
+void whc_clean_up(struct whc *whc)
+{
+	resource_size_t len;
+
+	if (whc->di_buf)
+		dma_free_coherent(&whc->umc->dev, sizeof(struct di_buf_entry) * whc->n_devices,
+				  whc->di_buf, whc->di_buf_dma);
+	if (whc->dn_buf)
+		dma_free_coherent(&whc->umc->dev, sizeof(struct dn_buf_entry) * WHC_N_DN_ENTRIES,
+				  whc->dn_buf, whc->dn_buf_dma);
+	if (whc->gen_cmd_buf)
+		dma_free_coherent(&whc->umc->dev, WHC_GEN_CMD_DATA_LEN,
+				  whc->gen_cmd_buf, whc->gen_cmd_buf_dma);
+
+	pzl_clean_up(whc);
+	asl_clean_up(whc);
+
+	if (whc->qset_pool)
+		dma_pool_destroy(whc->qset_pool);
+
+	len   = whc->umc->resource.end - whc->umc->resource.start + 1;
+	if (whc->base)
+		iounmap(whc->base);
+	if (whc->base_phys)
+		release_mem_region(whc->base_phys, len);
+
+	if (whc->workqueue)
+		destroy_workqueue(whc->workqueue);
+}
diff --git a/drivers/usb/host/whci/int.c b/drivers/usb/host/whci/int.c
new file mode 100644
index 0000000..fce0117
--- /dev/null
+++ b/drivers/usb/host/whci/int.c
@@ -0,0 +1,95 @@
+/*
+ * Wireless Host Controller (WHC) interrupt handling.
+ *
+ * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/uwb/umc.h>
+
+#include "../../wusbcore/wusbhc.h"
+
+#include "whcd.h"
+
+static void transfer_done(struct whc *whc)
+{
+	queue_work(whc->workqueue, &whc->async_work);
+	queue_work(whc->workqueue, &whc->periodic_work);
+}
+
+irqreturn_t whc_int_handler(struct usb_hcd *hcd)
+{
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(hcd);
+	struct whc *whc = wusbhc_to_whc(wusbhc);
+	u32 sts;
+
+	sts = le_readl(whc->base + WUSBSTS);
+	if (!(sts & WUSBSTS_INT_MASK))
+		return IRQ_NONE;
+	le_writel(sts & WUSBSTS_INT_MASK, whc->base + WUSBSTS);
+
+	if (sts & WUSBSTS_GEN_CMD_DONE)
+		wake_up(&whc->cmd_wq);
+
+	if (sts & WUSBSTS_HOST_ERR)
+		dev_err(&whc->umc->dev, "FIXME: host system error\n");
+
+	if (sts & WUSBSTS_ASYNC_SCHED_SYNCED)
+		wake_up(&whc->async_list_wq);
+
+	if (sts & WUSBSTS_PERIODIC_SCHED_SYNCED)
+		wake_up(&whc->periodic_list_wq);
+
+	if (sts & WUSBSTS_DNTS_INT)
+		queue_work(whc->workqueue, &whc->dn_work);
+
+	/*
+	 * A transfer completed (see [WHCI] section 4.7.1.2 for when
+	 * this occurs).
+	 */
+	if (sts & (WUSBSTS_INT | WUSBSTS_ERR_INT))
+		transfer_done(whc);
+
+	return IRQ_HANDLED;
+}
+
+static int process_dn_buf(struct whc *whc)
+{
+	struct wusbhc *wusbhc = &whc->wusbhc;
+	struct dn_buf_entry *dn;
+	int processed = 0;
+
+	for (dn = whc->dn_buf; dn < whc->dn_buf + WHC_N_DN_ENTRIES; dn++) {
+		if (dn->status & WHC_DN_STATUS_VALID) {
+			wusbhc_handle_dn(wusbhc, dn->src_addr,
+					 (struct wusb_dn_hdr *)dn->dn_data,
+					 dn->msg_size);
+			dn->status &= ~WHC_DN_STATUS_VALID;
+			processed++;
+		}
+	}
+	return processed;
+}
+
+void whc_dn_work(struct work_struct *work)
+{
+	struct whc *whc = container_of(work, struct whc, dn_work);
+	int processed;
+
+	do {
+		processed = process_dn_buf(whc);
+	} while (processed);
+}
diff --git a/drivers/usb/host/whci/pzl.c b/drivers/usb/host/whci/pzl.c
new file mode 100644
index 0000000..8d62df0
--- /dev/null
+++ b/drivers/usb/host/whci/pzl.c
@@ -0,0 +1,398 @@
+/*
+ * Wireless Host Controller (WHC) periodic schedule management.
+ *
+ * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/kernel.h>
+#include <linux/dma-mapping.h>
+#include <linux/uwb/umc.h>
+#include <linux/usb.h>
+#define D_LOCAL 0
+#include <linux/uwb/debug.h>
+
+#include "../../wusbcore/wusbhc.h"
+
+#include "whcd.h"
+
+#if D_LOCAL >= 4
+static void dump_pzl(struct whc *whc, const char *tag)
+{
+	struct device *dev = &whc->umc->dev;
+	struct whc_qset *qset;
+	int period = 0;
+
+	d_printf(4, dev, "PZL %s\n", tag);
+
+	for (period = 0; period < 5; period++) {
+		d_printf(4, dev, "Period %d\n", period);
+		list_for_each_entry(qset, &whc->periodic_list[period], list_node) {
+			dump_qset(qset, dev);
+		}
+	}
+}
+#else
+static inline void dump_pzl(struct whc *whc, const char *tag)
+{
+}
+#endif
+
+static void update_pzl_pointers(struct whc *whc, int period, u64 addr)
+{
+	switch (period) {
+	case 0:
+		whc_qset_set_link_ptr(&whc->pz_list[0], addr);
+		whc_qset_set_link_ptr(&whc->pz_list[2], addr);
+		whc_qset_set_link_ptr(&whc->pz_list[4], addr);
+		whc_qset_set_link_ptr(&whc->pz_list[6], addr);
+		whc_qset_set_link_ptr(&whc->pz_list[8], addr);
+		whc_qset_set_link_ptr(&whc->pz_list[10], addr);
+		whc_qset_set_link_ptr(&whc->pz_list[12], addr);
+		whc_qset_set_link_ptr(&whc->pz_list[14], addr);
+		break;
+	case 1:
+		whc_qset_set_link_ptr(&whc->pz_list[1], addr);
+		whc_qset_set_link_ptr(&whc->pz_list[5], addr);
+		whc_qset_set_link_ptr(&whc->pz_list[9], addr);
+		whc_qset_set_link_ptr(&whc->pz_list[13], addr);
+		break;
+	case 2:
+		whc_qset_set_link_ptr(&whc->pz_list[3], addr);
+		whc_qset_set_link_ptr(&whc->pz_list[11], addr);
+		break;
+	case 3:
+		whc_qset_set_link_ptr(&whc->pz_list[7], addr);
+		break;
+	case 4:
+		whc_qset_set_link_ptr(&whc->pz_list[15], addr);
+		break;
+	}
+}
+
+/*
+ * Return the 'period' to use for this qset.  The minimum interval for
+ * the endpoint is used so whatever urbs are submitted the device is
+ * polled often enough.
+ */
+static int qset_get_period(struct whc *whc, struct whc_qset *qset)
+{
+	uint8_t bInterval = qset->ep->desc.bInterval;
+
+	if (bInterval < 6)
+		bInterval = 6;
+	if (bInterval > 10)
+		bInterval = 10;
+	return bInterval - 6;
+}
+
+static void qset_insert_in_sw_list(struct whc *whc, struct whc_qset *qset)
+{
+	int period;
+
+	period = qset_get_period(whc, qset);
+
+	qset_clear(whc, qset);
+	list_move(&qset->list_node, &whc->periodic_list[period]);
+	qset->in_sw_list = true;
+}
+
+static void pzl_qset_remove(struct whc *whc, struct whc_qset *qset)
+{
+	list_move(&qset->list_node, &whc->periodic_removed_list);
+	qset->in_hw_list = false;
+	qset->in_sw_list = false;
+}
+
+/**
+ * pzl_process_qset - process any recently inactivated or halted qTDs
+ * in a qset.
+ *
+ * After inactive qTDs are removed, new qTDs can be added if the
+ * urb queue still contains URBs.
+ *
+ * Returns the schedule updates required.
+ */
+static enum whc_update pzl_process_qset(struct whc *whc, struct whc_qset *qset)
+{
+	enum whc_update update = 0;
+	uint32_t status = 0;
+
+	while (qset->ntds) {
+		struct whc_qtd *td;
+		int t;
+
+		t = qset->td_start;
+		td = &qset->qtd[qset->td_start];
+		status = le32_to_cpu(td->status);
+
+		/*
+		 * Nothing to do with a still active qTD.
+		 */
+		if (status & QTD_STS_ACTIVE)
+			break;
+
+		if (status & QTD_STS_HALTED) {
+			/* Ug, an error. */
+			process_halted_qtd(whc, qset, td);
+			goto done;
+		}
+
+		/* Mmm, a completed qTD. */
+		process_inactive_qtd(whc, qset, td);
+	}
+
+	update |= qset_add_qtds(whc, qset);
+
+done:
+	/*
+	 * If there are no qTDs in this qset, remove it from the PZL.
+	 */
+	if (qset->remove && qset->ntds == 0) {
+		pzl_qset_remove(whc, qset);
+		update |= WHC_UPDATE_REMOVED;
+	}
+
+	return update;
+}
+
+/**
+ * pzl_start - start the periodic schedule
+ * @whc: the WHCI host controller
+ *
+ * The PZL must be valid (e.g., all entries in the list should have
+ * the T bit set).
+ */
+void pzl_start(struct whc *whc)
+{
+	le_writeq(whc->pz_list_dma, whc->base + WUSBPERIODICLISTBASE);
+
+	whc_write_wusbcmd(whc, WUSBCMD_PERIODIC_EN, WUSBCMD_PERIODIC_EN);
+	whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS,
+		      WUSBSTS_PERIODIC_SCHED, WUSBSTS_PERIODIC_SCHED,
+		      1000, "start PZL");
+}
+
+/**
+ * pzl_stop - stop the periodic schedule
+ * @whc: the WHCI host controller
+ */
+void pzl_stop(struct whc *whc)
+{
+	whc_write_wusbcmd(whc, WUSBCMD_PERIODIC_EN, 0);
+	whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS,
+		      WUSBSTS_PERIODIC_SCHED, 0,
+		      1000, "stop PZL");
+}
+
+void pzl_update(struct whc *whc, uint32_t wusbcmd)
+{
+	whc_write_wusbcmd(whc, wusbcmd, wusbcmd);
+	wait_event(whc->periodic_list_wq,
+		   (le_readl(whc->base + WUSBCMD) & WUSBCMD_PERIODIC_UPDATED) == 0);
+}
+
+static void update_pzl_hw_view(struct whc *whc)
+{
+	struct whc_qset *qset, *t;
+	int period;
+	u64 tmp_qh = 0;
+
+	for (period = 0; period < 5; period++) {
+		list_for_each_entry_safe(qset, t, &whc->periodic_list[period], list_node) {
+			whc_qset_set_link_ptr(&qset->qh.link, tmp_qh);
+			tmp_qh = qset->qset_dma;
+			qset->in_hw_list = true;
+		}
+		update_pzl_pointers(whc, period, tmp_qh);
+	}
+}
+
+/**
+ * scan_periodic_work - scan the PZL for qsets to process.
+ *
+ * Process each qset in the PZL in turn and then signal the WHC that
+ * the PZL has been updated.
+ *
+ * Then start, stop or update the periodic schedule as required.
+ */
+void scan_periodic_work(struct work_struct *work)
+{
+	struct whc *whc = container_of(work, struct whc, periodic_work);
+	struct whc_qset *qset, *t;
+	enum whc_update update = 0;
+	int period;
+
+	spin_lock_irq(&whc->lock);
+
+	dump_pzl(whc, "before processing");
+
+	for (period = 4; period >= 0; period--) {
+		list_for_each_entry_safe(qset, t, &whc->periodic_list[period], list_node) {
+			if (!qset->in_hw_list)
+				update |= WHC_UPDATE_ADDED;
+			update |= pzl_process_qset(whc, qset);
+		}
+	}
+
+	if (update & (WHC_UPDATE_ADDED | WHC_UPDATE_REMOVED))
+		update_pzl_hw_view(whc);
+
+	dump_pzl(whc, "after processing");
+
+	spin_unlock_irq(&whc->lock);
+
+	if (update) {
+		uint32_t wusbcmd = WUSBCMD_PERIODIC_UPDATED | WUSBCMD_PERIODIC_SYNCED_DB;
+		if (update & WHC_UPDATE_REMOVED)
+			wusbcmd |= WUSBCMD_PERIODIC_QSET_RM;
+		pzl_update(whc, wusbcmd);
+	}
+
+	/*
+	 * Now that the PZL is updated, complete the removal of any
+	 * removed qsets.
+	 */
+	spin_lock(&whc->lock);
+
+	list_for_each_entry_safe(qset, t, &whc->periodic_removed_list, list_node) {
+		qset_remove_complete(whc, qset);
+	}
+
+	spin_unlock(&whc->lock);
+}
+
+/**
+ * pzl_urb_enqueue - queue an URB onto the periodic list (PZL)
+ * @whc: the WHCI host controller
+ * @urb: the URB to enqueue
+ * @mem_flags: flags for any memory allocations
+ *
+ * The qset for the endpoint is obtained and the urb queued on to it.
+ *
+ * Work is scheduled to update the hardware's view of the PZL.
+ */
+int pzl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags)
+{
+	struct whc_qset *qset;
+	int err;
+	unsigned long flags;
+
+	spin_lock_irqsave(&whc->lock, flags);
+
+	qset = get_qset(whc, urb, GFP_ATOMIC);
+	if (qset == NULL)
+		err = -ENOMEM;
+	else
+		err = qset_add_urb(whc, qset, urb, GFP_ATOMIC);
+	if (!err) {
+		usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb);
+		if (!qset->in_sw_list)
+			qset_insert_in_sw_list(whc, qset);
+	}
+
+	spin_unlock_irqrestore(&whc->lock, flags);
+
+	if (!err)
+		queue_work(whc->workqueue, &whc->periodic_work);
+
+	return 0;
+}
+
+/**
+ * pzl_urb_dequeue - remove an URB (qset) from the periodic list
+ * @whc: the WHCI host controller
+ * @urb: the URB to dequeue
+ * @status: the current status of the URB
+ *
+ * URBs that do yet have qTDs can simply be removed from the software
+ * queue, otherwise the qset must be removed so the qTDs can be safely
+ * removed.
+ */
+int pzl_urb_dequeue(struct whc *whc, struct urb *urb, int status)
+{
+	struct whc_urb *wurb = urb->hcpriv;
+	struct whc_qset *qset = wurb->qset;
+	struct whc_std *std, *t;
+	int ret;
+	unsigned long flags;
+
+	spin_lock_irqsave(&whc->lock, flags);
+
+	ret = usb_hcd_check_unlink_urb(&whc->wusbhc.usb_hcd, urb, status);
+	if (ret < 0)
+		goto out;
+
+	list_for_each_entry_safe(std, t, &qset->stds, list_node) {
+		if (std->urb == urb)
+			qset_free_std(whc, std);
+		else
+			std->qtd = NULL; /* so this std is re-added when the qset is */
+	}
+
+	pzl_qset_remove(whc, qset);
+	wurb->status = status;
+	wurb->is_async = false;
+	queue_work(whc->workqueue, &wurb->dequeue_work);
+
+out:
+	spin_unlock_irqrestore(&whc->lock, flags);
+
+	return ret;
+}
+
+/**
+ * pzl_qset_delete - delete a qset from the PZL
+ */
+void pzl_qset_delete(struct whc *whc, struct whc_qset *qset)
+{
+	qset->remove = 1;
+	queue_work(whc->workqueue, &whc->periodic_work);
+	qset_delete(whc, qset);
+}
+
+
+/**
+ * pzl_init - initialize the periodic zone list
+ * @whc: the WHCI host controller
+ */
+int pzl_init(struct whc *whc)
+{
+	int i;
+
+	whc->pz_list = dma_alloc_coherent(&whc->umc->dev, sizeof(u64) * 16,
+					  &whc->pz_list_dma, GFP_KERNEL);
+	if (whc->pz_list == NULL)
+		return -ENOMEM;
+
+	/* Set T bit on all elements in PZL. */
+	for (i = 0; i < 16; i++)
+		whc->pz_list[i] = cpu_to_le64(QH_LINK_NTDS(8) | QH_LINK_T);
+
+	le_writeq(whc->pz_list_dma, whc->base + WUSBPERIODICLISTBASE);
+
+	return 0;
+}
+
+/**
+ * pzl_clean_up - free PZL resources
+ * @whc: the WHCI host controller
+ *
+ * The PZL is stopped and empty.
+ */
+void pzl_clean_up(struct whc *whc)
+{
+	if (whc->pz_list)
+		dma_free_coherent(&whc->umc->dev,  sizeof(u64) * 16, whc->pz_list,
+				  whc->pz_list_dma);
+}
diff --git a/drivers/usb/host/whci/qset.c b/drivers/usb/host/whci/qset.c
new file mode 100644
index 0000000..0420037
--- /dev/null
+++ b/drivers/usb/host/whci/qset.c
@@ -0,0 +1,567 @@
+/*
+ * Wireless Host Controller (WHC) qset management.
+ *
+ * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/kernel.h>
+#include <linux/dma-mapping.h>
+#include <linux/uwb/umc.h>
+#include <linux/usb.h>
+
+#include "../../wusbcore/wusbhc.h"
+
+#include "whcd.h"
+
+void dump_qset(struct whc_qset *qset, struct device *dev)
+{
+	struct whc_std *std;
+	struct urb *urb = NULL;
+	int i;
+
+	dev_dbg(dev, "qset %08x\n", (u32)qset->qset_dma);
+	dev_dbg(dev, "  -> %08x\n", (u32)qset->qh.link);
+	dev_dbg(dev, "  info: %08x %08x %08x\n",
+		qset->qh.info1, qset->qh.info2,  qset->qh.info3);
+	dev_dbg(dev, "  sts: %04x errs: %d\n", qset->qh.status, qset->qh.err_count);
+	dev_dbg(dev, "  TD: sts: %08x opts: %08x\n",
+		qset->qh.overlay.qtd.status, qset->qh.overlay.qtd.options);
+
+	for (i = 0; i < WHCI_QSET_TD_MAX; i++) {
+		dev_dbg(dev, "  %c%c TD[%d]: sts: %08x opts: %08x ptr: %08x\n",
+			i == qset->td_start ? 'S' : ' ',
+			i == qset->td_end ? 'E' : ' ',
+			i, qset->qtd[i].status, qset->qtd[i].options,
+			(u32)qset->qtd[i].page_list_ptr);
+	}
+	dev_dbg(dev, "  ntds: %d\n", qset->ntds);
+	list_for_each_entry(std, &qset->stds, list_node) {
+		if (urb != std->urb) {
+			urb = std->urb;
+			dev_dbg(dev, "  urb %p transferred: %d bytes\n", urb,
+				urb->actual_length);
+		}
+		if (std->qtd)
+			dev_dbg(dev, "    sTD[%td]: %zu bytes @ %08x\n",
+				std->qtd - &qset->qtd[0],
+				std->len, std->num_pointers ?
+				(u32)(std->pl_virt[0].buf_ptr) : (u32)std->dma_addr);
+		else
+			dev_dbg(dev, "    sTD[-]: %zd bytes @ %08x\n",
+				std->len, std->num_pointers ?
+				(u32)(std->pl_virt[0].buf_ptr) : (u32)std->dma_addr);
+	}
+}
+
+struct whc_qset *qset_alloc(struct whc *whc, gfp_t mem_flags)
+{
+	struct whc_qset *qset;
+	dma_addr_t dma;
+
+	qset = dma_pool_alloc(whc->qset_pool, mem_flags, &dma);
+	if (qset == NULL)
+		return NULL;
+	memset(qset, 0, sizeof(struct whc_qset));
+
+	qset->qset_dma = dma;
+	qset->whc = whc;
+
+	INIT_LIST_HEAD(&qset->list_node);
+	INIT_LIST_HEAD(&qset->stds);
+
+	return qset;
+}
+
+/**
+ * qset_fill_qh - fill the static endpoint state in a qset's QHead
+ * @qset: the qset whose QH needs initializing with static endpoint
+ *        state
+ * @urb:  an urb for a transfer to this endpoint
+ */
+static void qset_fill_qh(struct whc_qset *qset, struct urb *urb)
+{
+	struct usb_device *usb_dev = urb->dev;
+	struct usb_wireless_ep_comp_descriptor *epcd;
+	bool is_out;
+
+	is_out = usb_pipeout(urb->pipe);
+
+	epcd = (struct usb_wireless_ep_comp_descriptor *)qset->ep->extra;
+
+	if (epcd) {
+		qset->max_seq = epcd->bMaxSequence;
+		qset->max_burst = epcd->bMaxBurst;
+	} else {
+		qset->max_seq = 2;
+		qset->max_burst = 1;
+	}
+
+	qset->qh.info1 = cpu_to_le32(
+		QH_INFO1_EP(usb_pipeendpoint(urb->pipe))
+		| (is_out ? QH_INFO1_DIR_OUT : QH_INFO1_DIR_IN)
+		| usb_pipe_to_qh_type(urb->pipe)
+		| QH_INFO1_DEV_INFO_IDX(wusb_port_no_to_idx(usb_dev->portnum))
+		| QH_INFO1_MAX_PKT_LEN(usb_maxpacket(urb->dev, urb->pipe, is_out))
+		);
+	qset->qh.info2 = cpu_to_le32(
+		QH_INFO2_BURST(qset->max_burst)
+		| QH_INFO2_DBP(0)
+		| QH_INFO2_MAX_COUNT(3)
+		| QH_INFO2_MAX_RETRY(3)
+		| QH_INFO2_MAX_SEQ(qset->max_seq - 1)
+		);
+	/* FIXME: where can we obtain these Tx parameters from?  Why
+	 * doesn't the chip know what Tx power to use? It knows the Rx
+	 * strength and can presumably guess the Tx power required
+	 * from that? */
+	qset->qh.info3 = cpu_to_le32(
+		QH_INFO3_TX_RATE_53_3
+		| QH_INFO3_TX_PWR(0) /* 0 == max power */
+		);
+}
+
+/**
+ * qset_clear - clear fields in a qset so it may be reinserted into a
+ * schedule
+ */
+void qset_clear(struct whc *whc, struct whc_qset *qset)
+{
+	qset->td_start = qset->td_end = qset->ntds = 0;
+	qset->remove = 0;
+
+	qset->qh.link = cpu_to_le32(QH_LINK_NTDS(8) | QH_LINK_T);
+	qset->qh.status = cpu_to_le16(QH_STATUS_ICUR(qset->td_start));
+	qset->qh.err_count = 0;
+	qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1);
+	qset->qh.scratch[0] = 0;
+	qset->qh.scratch[1] = 0;
+	qset->qh.scratch[2] = 0;
+
+	memset(&qset->qh.overlay, 0, sizeof(qset->qh.overlay));
+
+	init_completion(&qset->remove_complete);
+}
+
+/**
+ * get_qset - get the qset for an async endpoint
+ *
+ * A new qset is created if one does not already exist.
+ */
+struct whc_qset *get_qset(struct whc *whc, struct urb *urb,
+				 gfp_t mem_flags)
+{
+	struct whc_qset *qset;
+
+	qset = urb->ep->hcpriv;
+	if (qset == NULL) {
+		qset = qset_alloc(whc, mem_flags);
+		if (qset == NULL)
+			return NULL;
+
+		qset->ep = urb->ep;
+		urb->ep->hcpriv = qset;
+		qset_fill_qh(qset, urb);
+	}
+	return qset;
+}
+
+void qset_remove_complete(struct whc *whc, struct whc_qset *qset)
+{
+	list_del_init(&qset->list_node);
+	complete(&qset->remove_complete);
+}
+
+/**
+ * qset_add_qtds - add qTDs for an URB to a qset
+ *
+ * Returns true if the list (ASL/PZL) must be updated because (for a
+ * WHCI 0.95 controller) an activated qTD was pointed to be iCur.
+ */
+enum whc_update qset_add_qtds(struct whc *whc, struct whc_qset *qset)
+{
+	struct whc_std *std;
+	enum whc_update update = 0;
+
+	list_for_each_entry(std, &qset->stds, list_node) {
+		struct whc_qtd *qtd;
+		uint32_t status;
+
+		if (qset->ntds >= WHCI_QSET_TD_MAX
+		    || (qset->pause_after_urb && std->urb != qset->pause_after_urb))
+			break;
+
+		if (std->qtd)
+			continue; /* already has a qTD */
+
+		qtd = std->qtd = &qset->qtd[qset->td_end];
+
+		/* Fill in setup bytes for control transfers. */
+		if (usb_pipecontrol(std->urb->pipe))
+			memcpy(qtd->setup, std->urb->setup_packet, 8);
+
+		status = QTD_STS_ACTIVE | QTD_STS_LEN(std->len);
+
+		if (whc_std_last(std) && usb_pipeout(std->urb->pipe))
+			status |= QTD_STS_LAST_PKT;
+
+		/*
+		 * For an IN transfer the iAlt field should be set so
+		 * the h/w will automatically advance to the next
+		 * transfer. However, if there are 8 or more TDs
+		 * remaining in this transfer then iAlt cannot be set
+		 * as it could point to somewhere in this transfer.
+		 */
+		if (std->ntds_remaining < WHCI_QSET_TD_MAX) {
+			int ialt;
+			ialt = (qset->td_end + std->ntds_remaining) % WHCI_QSET_TD_MAX;
+			status |= QTD_STS_IALT(ialt);
+		} else if (usb_pipein(std->urb->pipe))
+			qset->pause_after_urb = std->urb;
+
+		if (std->num_pointers)
+			qtd->options = cpu_to_le32(QTD_OPT_IOC);
+		else
+			qtd->options = cpu_to_le32(QTD_OPT_IOC | QTD_OPT_SMALL);
+		qtd->page_list_ptr = cpu_to_le64(std->dma_addr);
+
+		qtd->status = cpu_to_le32(status);
+
+		if (QH_STATUS_TO_ICUR(qset->qh.status) == qset->td_end)
+			update = WHC_UPDATE_UPDATED;
+
+		if (++qset->td_end >= WHCI_QSET_TD_MAX)
+			qset->td_end = 0;
+		qset->ntds++;
+	}
+
+	return update;
+}
+
+/**
+ * qset_remove_qtd - remove the first qTD from a qset.
+ *
+ * The qTD might be still active (if it's part of a IN URB that
+ * resulted in a short read) so ensure it's deactivated.
+ */
+static void qset_remove_qtd(struct whc *whc, struct whc_qset *qset)
+{
+	qset->qtd[qset->td_start].status = 0;
+
+	if (++qset->td_start >= WHCI_QSET_TD_MAX)
+		qset->td_start = 0;
+	qset->ntds--;
+}
+
+/**
+ * qset_free_std - remove an sTD and free it.
+ * @whc: the WHCI host controller
+ * @std: the sTD to remove and free.
+ */
+void qset_free_std(struct whc *whc, struct whc_std *std)
+{
+	list_del(&std->list_node);
+	if (std->num_pointers) {
+		dma_unmap_single(whc->wusbhc.dev, std->dma_addr,
+				 std->num_pointers * sizeof(struct whc_page_list_entry),
+				 DMA_TO_DEVICE);
+		kfree(std->pl_virt);
+	}
+
+	kfree(std);
+}
+
+/**
+ * qset_remove_qtds - remove an URB's qTDs (and sTDs).
+ */
+static void qset_remove_qtds(struct whc *whc, struct whc_qset *qset,
+			     struct urb *urb)
+{
+	struct whc_std *std, *t;
+
+	list_for_each_entry_safe(std, t, &qset->stds, list_node) {
+		if (std->urb != urb)
+			break;
+		if (std->qtd != NULL)
+			qset_remove_qtd(whc, qset);
+		qset_free_std(whc, std);
+	}
+}
+
+/**
+ * qset_free_stds - free any remaining sTDs for an URB.
+ */
+static void qset_free_stds(struct whc_qset *qset, struct urb *urb)
+{
+	struct whc_std *std, *t;
+
+	list_for_each_entry_safe(std, t, &qset->stds, list_node) {
+		if (std->urb == urb)
+			qset_free_std(qset->whc, std);
+	}
+}
+
+static int qset_fill_page_list(struct whc *whc, struct whc_std *std, gfp_t mem_flags)
+{
+	dma_addr_t dma_addr = std->dma_addr;
+	dma_addr_t sp, ep;
+	size_t std_len = std->len;
+	size_t pl_len;
+	int p;
+
+	sp = ALIGN(dma_addr, WHCI_PAGE_SIZE);
+	ep = dma_addr + std_len;
+	std->num_pointers = DIV_ROUND_UP(ep - sp, WHCI_PAGE_SIZE);
+
+	pl_len = std->num_pointers * sizeof(struct whc_page_list_entry);
+	std->pl_virt = kmalloc(pl_len, mem_flags);
+	if (std->pl_virt == NULL)
+		return -ENOMEM;
+	std->dma_addr = dma_map_single(whc->wusbhc.dev, std->pl_virt, pl_len, DMA_TO_DEVICE);
+
+	for (p = 0; p < std->num_pointers; p++) {
+		std->pl_virt[p].buf_ptr = cpu_to_le64(dma_addr);
+		dma_addr = ALIGN(dma_addr + WHCI_PAGE_SIZE, WHCI_PAGE_SIZE);
+	}
+
+	return 0;
+}
+
+/**
+ * urb_dequeue_work - executes asl/pzl update and gives back the urb to the system.
+ */
+static void urb_dequeue_work(struct work_struct *work)
+{
+	struct whc_urb *wurb = container_of(work, struct whc_urb, dequeue_work);
+	struct whc_qset *qset = wurb->qset;
+	struct whc *whc = qset->whc;
+	unsigned long flags;
+
+	if (wurb->is_async == true)
+		asl_update(whc, WUSBCMD_ASYNC_UPDATED
+			   | WUSBCMD_ASYNC_SYNCED_DB
+			   | WUSBCMD_ASYNC_QSET_RM);
+	else
+		pzl_update(whc, WUSBCMD_PERIODIC_UPDATED
+			   | WUSBCMD_PERIODIC_SYNCED_DB
+			   | WUSBCMD_PERIODIC_QSET_RM);
+
+	spin_lock_irqsave(&whc->lock, flags);
+	qset_remove_urb(whc, qset, wurb->urb, wurb->status);
+	spin_unlock_irqrestore(&whc->lock, flags);
+}
+
+/**
+ * qset_add_urb - add an urb to the qset's queue.
+ *
+ * The URB is chopped into sTDs, one for each qTD that will required.
+ * At least one qTD (and sTD) is required even if the transfer has no
+ * data (e.g., for some control transfers).
+ */
+int qset_add_urb(struct whc *whc, struct whc_qset *qset, struct urb *urb,
+	gfp_t mem_flags)
+{
+	struct whc_urb *wurb;
+	int remaining = urb->transfer_buffer_length;
+	u64 transfer_dma = urb->transfer_dma;
+	int ntds_remaining;
+
+	ntds_remaining = DIV_ROUND_UP(remaining, QTD_MAX_XFER_SIZE);
+	if (ntds_remaining == 0)
+		ntds_remaining = 1;
+
+	wurb = kzalloc(sizeof(struct whc_urb), mem_flags);
+	if (wurb == NULL)
+		goto err_no_mem;
+	urb->hcpriv = wurb;
+	wurb->qset = qset;
+	wurb->urb = urb;
+	INIT_WORK(&wurb->dequeue_work, urb_dequeue_work);
+
+	while (ntds_remaining) {
+		struct whc_std *std;
+		size_t std_len;
+
+		std = kmalloc(sizeof(struct whc_std), mem_flags);
+		if (std == NULL)
+			goto err_no_mem;
+
+		std_len = remaining;
+		if (std_len > QTD_MAX_XFER_SIZE)
+			std_len = QTD_MAX_XFER_SIZE;
+
+		std->urb = urb;
+		std->dma_addr = transfer_dma;
+		std->len = std_len;
+		std->ntds_remaining = ntds_remaining;
+		std->qtd = NULL;
+
+		INIT_LIST_HEAD(&std->list_node);
+		list_add_tail(&std->list_node, &qset->stds);
+
+		if (std_len > WHCI_PAGE_SIZE) {
+			if (qset_fill_page_list(whc, std, mem_flags) < 0)
+				goto err_no_mem;
+		} else
+			std->num_pointers = 0;
+
+		ntds_remaining--;
+		remaining -= std_len;
+		transfer_dma += std_len;
+	}
+
+	return 0;
+
+err_no_mem:
+	qset_free_stds(qset, urb);
+	return -ENOMEM;
+}
+
+/**
+ * qset_remove_urb - remove an URB from the urb queue.
+ *
+ * The URB is returned to the USB subsystem.
+ */
+void qset_remove_urb(struct whc *whc, struct whc_qset *qset,
+			    struct urb *urb, int status)
+{
+	struct wusbhc *wusbhc = &whc->wusbhc;
+	struct whc_urb *wurb = urb->hcpriv;
+
+	usb_hcd_unlink_urb_from_ep(&wusbhc->usb_hcd, urb);
+	/* Drop the lock as urb->complete() may enqueue another urb. */
+	spin_unlock(&whc->lock);
+	wusbhc_giveback_urb(wusbhc, urb, status);
+	spin_lock(&whc->lock);
+
+	kfree(wurb);
+}
+
+/**
+ * get_urb_status_from_qtd - get the completed urb status from qTD status
+ * @urb:    completed urb
+ * @status: qTD status
+ */
+static int get_urb_status_from_qtd(struct urb *urb, u32 status)
+{
+	if (status & QTD_STS_HALTED) {
+		if (status & QTD_STS_DBE)
+			return usb_pipein(urb->pipe) ? -ENOSR : -ECOMM;
+		else if (status & QTD_STS_BABBLE)
+			return -EOVERFLOW;
+		else if (status & QTD_STS_RCE)
+			return -ETIME;
+		return -EPIPE;
+	}
+	if (usb_pipein(urb->pipe)
+	    && (urb->transfer_flags & URB_SHORT_NOT_OK)
+	    && urb->actual_length < urb->transfer_buffer_length)
+		return -EREMOTEIO;
+	return 0;
+}
+
+/**
+ * process_inactive_qtd - process an inactive (but not halted) qTD.
+ *
+ * Update the urb with the transfer bytes from the qTD, if the urb is
+ * completely transfered or (in the case of an IN only) the LPF is
+ * set, then the transfer is complete and the urb should be returned
+ * to the system.
+ */
+void process_inactive_qtd(struct whc *whc, struct whc_qset *qset,
+				 struct whc_qtd *qtd)
+{
+	struct whc_std *std = list_first_entry(&qset->stds, struct whc_std, list_node);
+	struct urb *urb = std->urb;
+	uint32_t status;
+	bool complete;
+
+	status = le32_to_cpu(qtd->status);
+
+	urb->actual_length += std->len - QTD_STS_TO_LEN(status);
+
+	if (usb_pipein(urb->pipe) && (status & QTD_STS_LAST_PKT))
+		complete = true;
+	else
+		complete = whc_std_last(std);
+
+	qset_remove_qtd(whc, qset);
+	qset_free_std(whc, std);
+
+	/*
+	 * Transfers for this URB are complete?  Then return it to the
+	 * USB subsystem.
+	 */
+	if (complete) {
+		qset_remove_qtds(whc, qset, urb);
+		qset_remove_urb(whc, qset, urb, get_urb_status_from_qtd(urb, status));
+
+		/*
+		 * If iAlt isn't valid then the hardware didn't
+		 * advance iCur. Adjust the start and end pointers to
+		 * match iCur.
+		 */
+		if (!(status & QTD_STS_IALT_VALID))
+			qset->td_start = qset->td_end
+				= QH_STATUS_TO_ICUR(le16_to_cpu(qset->qh.status));
+		qset->pause_after_urb = NULL;
+	}
+}
+
+/**
+ * process_halted_qtd - process a qset with a halted qtd
+ *
+ * Remove all the qTDs for the failed URB and return the failed URB to
+ * the USB subsystem.  Then remove all other qTDs so the qset can be
+ * removed.
+ *
+ * FIXME: this is the point where rate adaptation can be done.  If a
+ * transfer failed because it exceeded the maximum number of retries
+ * then it could be reactivated with a slower rate without having to
+ * remove the qset.
+ */
+void process_halted_qtd(struct whc *whc, struct whc_qset *qset,
+			       struct whc_qtd *qtd)
+{
+	struct whc_std *std = list_first_entry(&qset->stds, struct whc_std, list_node);
+	struct urb *urb = std->urb;
+	int urb_status;
+
+	urb_status = get_urb_status_from_qtd(urb, le32_to_cpu(qtd->status));
+
+	qset_remove_qtds(whc, qset, urb);
+	qset_remove_urb(whc, qset, urb, urb_status);
+
+	list_for_each_entry(std, &qset->stds, list_node) {
+		if (qset->ntds == 0)
+			break;
+		qset_remove_qtd(whc, qset);
+		std->qtd = NULL;
+	}
+
+	qset->remove = 1;
+}
+
+void qset_free(struct whc *whc, struct whc_qset *qset)
+{
+	dma_pool_free(whc->qset_pool, qset, qset->qset_dma);
+}
+
+/**
+ * qset_delete - wait for a qset to be unused, then free it.
+ */
+void qset_delete(struct whc *whc, struct whc_qset *qset)
+{
+	wait_for_completion(&qset->remove_complete);
+	qset_free(whc, qset);
+}
diff --git a/drivers/usb/host/whci/whcd.h b/drivers/usb/host/whci/whcd.h
new file mode 100644
index 0000000..1d2a53b
--- /dev/null
+++ b/drivers/usb/host/whci/whcd.h
@@ -0,0 +1,197 @@
+/*
+ * Wireless Host Controller (WHC) private header.
+ *
+ * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+#ifndef __WHCD_H
+#define __WHCD_H
+
+#include <linux/uwb/whci.h>
+#include <linux/workqueue.h>
+
+#include "whci-hc.h"
+
+/* Generic command timeout. */
+#define WHC_GENCMD_TIMEOUT_MS 100
+
+
+struct whc {
+	struct wusbhc wusbhc;
+	struct umc_dev *umc;
+
+	resource_size_t base_phys;
+	void __iomem *base;
+	int irq;
+
+	u8 n_devices;
+	u8 n_keys;
+	u8 n_mmc_ies;
+
+	u64 *pz_list;
+	struct dn_buf_entry *dn_buf;
+	struct di_buf_entry *di_buf;
+	dma_addr_t pz_list_dma;
+	dma_addr_t dn_buf_dma;
+	dma_addr_t di_buf_dma;
+
+	spinlock_t   lock;
+	struct mutex mutex;
+
+	void *            gen_cmd_buf;
+	dma_addr_t        gen_cmd_buf_dma;
+	wait_queue_head_t cmd_wq;
+
+	struct workqueue_struct *workqueue;
+	struct work_struct       dn_work;
+
+	struct dma_pool *qset_pool;
+
+	struct list_head async_list;
+	struct list_head async_removed_list;
+	wait_queue_head_t async_list_wq;
+	struct work_struct async_work;
+
+	struct list_head periodic_list[5];
+	struct list_head periodic_removed_list;
+	wait_queue_head_t periodic_list_wq;
+	struct work_struct periodic_work;
+};
+
+#define wusbhc_to_whc(w) (container_of((w), struct whc, wusbhc))
+
+/**
+ * struct whc_std - a software TD.
+ * @urb: the URB this sTD is for.
+ * @offset: start of the URB's data for this TD.
+ * @len: the length of data in the associated TD.
+ * @ntds_remaining: number of TDs (starting from this one) in this transfer.
+ *
+ * Queued URBs may require more TDs than are available in a qset so we
+ * use a list of these "software TDs" (sTDs) to hold per-TD data.
+ */
+struct whc_std {
+	struct urb *urb;
+	size_t len;
+	int    ntds_remaining;
+	struct whc_qtd *qtd;
+
+	struct list_head list_node;
+	int num_pointers;
+	dma_addr_t dma_addr;
+	struct whc_page_list_entry *pl_virt;
+};
+
+/**
+ * struct whc_urb - per URB host controller structure.
+ * @urb: the URB this struct is for.
+ * @qset: the qset associated to the URB.
+ * @dequeue_work: the work to remove the URB when dequeued.
+ * @is_async: the URB belongs to async sheduler or not.
+ * @status: the status to be returned when calling wusbhc_giveback_urb.
+ */
+struct whc_urb {
+	struct urb *urb;
+	struct whc_qset *qset;
+	struct work_struct dequeue_work;
+	bool is_async;
+	int status;
+};
+
+/**
+ * whc_std_last - is this sTD the URB's last?
+ * @std: the sTD to check.
+ */
+static inline bool whc_std_last(struct whc_std *std)
+{
+	return std->ntds_remaining <= 1;
+}
+
+enum whc_update {
+	WHC_UPDATE_ADDED   = 0x01,
+	WHC_UPDATE_REMOVED = 0x02,
+	WHC_UPDATE_UPDATED = 0x04,
+};
+
+/* init.c */
+int whc_init(struct whc *whc);
+void whc_clean_up(struct whc *whc);
+
+/* hw.c */
+void whc_write_wusbcmd(struct whc *whc, u32 mask, u32 val);
+int whc_do_gencmd(struct whc *whc, u32 cmd, u32 params, void *addr, size_t len);
+
+/* wusb.c */
+int whc_wusbhc_start(struct wusbhc *wusbhc);
+void whc_wusbhc_stop(struct wusbhc *wusbhc);
+int whc_mmcie_add(struct wusbhc *wusbhc, u8 interval, u8 repeat_cnt,
+		  u8 handle, struct wuie_hdr *wuie);
+int whc_mmcie_rm(struct wusbhc *wusbhc, u8 handle);
+int whc_bwa_set(struct wusbhc *wusbhc, s8 stream_index, const struct uwb_mas_bm *mas_bm);
+int whc_dev_info_set(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev);
+int whc_set_num_dnts(struct wusbhc *wusbhc, u8 interval, u8 slots);
+int whc_set_ptk(struct wusbhc *wusbhc, u8 port_idx, u32 tkid,
+		const void *ptk, size_t key_size);
+int whc_set_gtk(struct wusbhc *wusbhc, u32 tkid,
+		const void *gtk, size_t key_size);
+int whc_set_cluster_id(struct whc *whc, u8 bcid);
+
+/* int.c */
+irqreturn_t whc_int_handler(struct usb_hcd *hcd);
+void whc_dn_work(struct work_struct *work);
+
+/* asl.c */
+void asl_start(struct whc *whc);
+void asl_stop(struct whc *whc);
+int  asl_init(struct whc *whc);
+void asl_clean_up(struct whc *whc);
+int  asl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags);
+int  asl_urb_dequeue(struct whc *whc, struct urb *urb, int status);
+void asl_qset_delete(struct whc *whc, struct whc_qset *qset);
+void scan_async_work(struct work_struct *work);
+
+/* pzl.c */
+int  pzl_init(struct whc *whc);
+void pzl_clean_up(struct whc *whc);
+void pzl_start(struct whc *whc);
+void pzl_stop(struct whc *whc);
+int  pzl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags);
+int  pzl_urb_dequeue(struct whc *whc, struct urb *urb, int status);
+void pzl_qset_delete(struct whc *whc, struct whc_qset *qset);
+void scan_periodic_work(struct work_struct *work);
+
+/* qset.c */
+struct whc_qset *qset_alloc(struct whc *whc, gfp_t mem_flags);
+void qset_free(struct whc *whc, struct whc_qset *qset);
+struct whc_qset *get_qset(struct whc *whc, struct urb *urb, gfp_t mem_flags);
+void qset_delete(struct whc *whc, struct whc_qset *qset);
+void qset_clear(struct whc *whc, struct whc_qset *qset);
+int qset_add_urb(struct whc *whc, struct whc_qset *qset, struct urb *urb,
+		 gfp_t mem_flags);
+void qset_free_std(struct whc *whc, struct whc_std *std);
+void qset_remove_urb(struct whc *whc, struct whc_qset *qset,
+			    struct urb *urb, int status);
+void process_halted_qtd(struct whc *whc, struct whc_qset *qset,
+			       struct whc_qtd *qtd);
+void process_inactive_qtd(struct whc *whc, struct whc_qset *qset,
+				 struct whc_qtd *qtd);
+enum whc_update qset_add_qtds(struct whc *whc, struct whc_qset *qset);
+void qset_remove_complete(struct whc *whc, struct whc_qset *qset);
+void dump_qset(struct whc_qset *qset, struct device *dev);
+void pzl_update(struct whc *whc, uint32_t wusbcmd);
+void asl_update(struct whc *whc, uint32_t wusbcmd);
+
+#endif /* #ifndef __WHCD_H */
diff --git a/drivers/usb/host/whci/whci-hc.h b/drivers/usb/host/whci/whci-hc.h
new file mode 100644
index 0000000..bff1eb7
--- /dev/null
+++ b/drivers/usb/host/whci/whci-hc.h
@@ -0,0 +1,416 @@
+/*
+ * Wireless Host Controller (WHC) data structures.
+ *
+ * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+#ifndef _WHCI_WHCI_HC_H
+#define _WHCI_WHCI_HC_H
+
+#include <linux/list.h>
+
+/**
+ * WHCI_PAGE_SIZE - page size use by WHCI
+ *
+ * WHCI assumes that host system uses pages of 4096 octets.
+ */
+#define WHCI_PAGE_SIZE 4096
+
+
+/**
+ * QTD_MAX_TXFER_SIZE - max number of bytes to transfer with a single
+ * qtd.
+ *
+ * This is 2^20 - 1.
+ */
+#define QTD_MAX_XFER_SIZE 1048575
+
+
+/**
+ * struct whc_qtd - Queue Element Transfer Descriptors (qTD)
+ *
+ * This describes the data for a bulk, control or interrupt transfer.
+ *
+ * [WHCI] section 3.2.4
+ */
+struct whc_qtd {
+	__le32 status; /*< remaining transfer len and transfer status */
+	__le32 options;
+	__le64 page_list_ptr; /*< physical pointer to data buffer page list*/
+	__u8   setup[8];      /*< setup data for control transfers */
+} __attribute__((packed));
+
+#define QTD_STS_ACTIVE     (1 << 31)  /* enable execution of transaction */
+#define QTD_STS_HALTED     (1 << 30)  /* transfer halted */
+#define QTD_STS_DBE        (1 << 29)  /* data buffer error */
+#define QTD_STS_BABBLE     (1 << 28)  /* babble detected */
+#define QTD_STS_RCE        (1 << 27)  /* retry count exceeded */
+#define QTD_STS_LAST_PKT   (1 << 26)  /* set Last Packet Flag in WUSB header */
+#define QTD_STS_INACTIVE   (1 << 25)  /* queue set is marked inactive */
+#define QTD_STS_IALT_VALID (1 << 23)                          /* iAlt field is valid */
+#define QTD_STS_IALT(i)    (QTD_STS_IALT_VALID | ((i) << 20)) /* iAlt field */
+#define QTD_STS_LEN(l)     ((l) << 0) /* transfer length */
+#define QTD_STS_TO_LEN(s)  ((s) & 0x000fffff)
+
+#define QTD_OPT_IOC      (1 << 1) /* page_list_ptr points to buffer directly */
+#define QTD_OPT_SMALL    (1 << 0) /* interrupt on complete */
+
+/**
+ * struct whc_itd - Isochronous Queue Element Transfer Descriptors (iTD)
+ *
+ * This describes the data and other parameters for an isochronous
+ * transfer.
+ *
+ * [WHCI] section 3.2.5
+ */
+struct whc_itd {
+	__le16 presentation_time;    /*< presentation time for OUT transfers */
+	__u8   num_segments;         /*< number of data segments in segment list */
+	__u8   status;               /*< command execution status */
+	__le32 options;              /*< misc transfer options */
+	__le64 page_list_ptr;        /*< physical pointer to data buffer page list */
+	__le64 seg_list_ptr;         /*< physical pointer to segment list */
+} __attribute__((packed));
+
+#define ITD_STS_ACTIVE   (1 << 7) /* enable execution of transaction */
+#define ITD_STS_DBE      (1 << 5) /* data buffer error */
+#define ITD_STS_BABBLE   (1 << 4) /* babble detected */
+#define ITD_STS_INACTIVE (1 << 1) /* queue set is marked inactive */
+
+#define ITD_OPT_IOC      (1 << 1) /* interrupt on complete */
+#define ITD_OPT_SMALL    (1 << 0) /* page_list_ptr points to buffer directly */
+
+/**
+ * Page list entry.
+ *
+ * A TD's page list must contain sufficient page list entries for the
+ * total data length in the TD.
+ *
+ * [WHCI] section 3.2.4.3
+ */
+struct whc_page_list_entry {
+	__le64 buf_ptr; /*< physical pointer to buffer */
+} __attribute__((packed));
+
+/**
+ * struct whc_seg_list_entry - Segment list entry.
+ *
+ * Describes a portion of the data buffer described in the containing
+ * qTD's page list.
+ *
+ * seg_ptr = qtd->page_list_ptr[qtd->seg_list_ptr[seg].idx].buf_ptr
+ *           + qtd->seg_list_ptr[seg].offset;
+ *
+ * Segments can't cross page boundries.
+ *
+ * [WHCI] section 3.2.5.5
+ */
+struct whc_seg_list_entry {
+	__le16 len;    /*< segment length */
+	__u8   idx;    /*< index into page list */
+	__u8   status; /*< segment status */
+	__le16 offset; /*< 12 bit offset into page */
+} __attribute__((packed));
+
+/**
+ * struct whc_qhead - endpoint and status information for a qset.
+ *
+ * [WHCI] section 3.2.6
+ */
+struct whc_qhead {
+	__le64 link; /*< next qset in list */
+	__le32 info1;
+	__le32 info2;
+	__le32 info3;
+	__le16 status;
+	__le16 err_count;  /*< transaction error count */
+	__le32 cur_window;
+	__le32 scratch[3]; /*< h/w scratch area */
+	union {
+		struct whc_qtd qtd;
+		struct whc_itd itd;
+	} overlay;
+} __attribute__((packed));
+
+#define QH_LINK_PTR_MASK (~0x03Full)
+#define QH_LINK_PTR(ptr) ((ptr) & QH_LINK_PTR_MASK)
+#define QH_LINK_IQS      (1 << 4) /* isochronous queue set */
+#define QH_LINK_NTDS(n)  (((n) - 1) << 1) /* number of TDs in queue set */
+#define QH_LINK_T        (1 << 0) /* last queue set in periodic schedule list */
+
+#define QH_INFO1_EP(e)           ((e) << 0)  /* endpoint number */
+#define QH_INFO1_DIR_IN          (1 << 4)    /* IN transfer */
+#define QH_INFO1_DIR_OUT         (0 << 4)    /* OUT transfer */
+#define QH_INFO1_TR_TYPE_CTRL    (0x0 << 5)  /* control transfer */
+#define QH_INFO1_TR_TYPE_ISOC    (0x1 << 5)  /* isochronous transfer */
+#define QH_INFO1_TR_TYPE_BULK    (0x2 << 5)  /* bulk transfer */
+#define QH_INFO1_TR_TYPE_INT     (0x3 << 5)  /* interrupt */
+#define QH_INFO1_TR_TYPE_LP_INT  (0x7 << 5)  /* low power interrupt */
+#define QH_INFO1_DEV_INFO_IDX(i) ((i) << 8)  /* index into device info buffer */
+#define QH_INFO1_SET_INACTIVE    (1 << 15)   /* set inactive after transfer */
+#define QH_INFO1_MAX_PKT_LEN(l)  ((l) << 16) /* maximum packet length */
+
+#define QH_INFO2_BURST(b)        ((b) << 0)  /* maximum burst length */
+#define QH_INFO2_DBP(p)          ((p) << 5)  /* data burst policy (see [WUSB] table 5-7) */
+#define QH_INFO2_MAX_COUNT(c)    ((c) << 8)  /* max isoc/int pkts per zone */
+#define QH_INFO2_RQS             (1 << 15)   /* reactivate queue set */
+#define QH_INFO2_MAX_RETRY(r)    ((r) << 16) /* maximum transaction retries */
+#define QH_INFO2_MAX_SEQ(s)      ((s) << 20) /* maximum sequence number */
+#define QH_INFO3_MAX_DELAY(d)    ((d) << 0)  /* maximum stream delay in 125 us units (isoc only) */
+#define QH_INFO3_INTERVAL(i)     ((i) << 16) /* segment interval in 125 us units (isoc only) */
+
+#define QH_INFO3_TX_RATE_53_3    (0 << 24)
+#define QH_INFO3_TX_RATE_80      (1 << 24)
+#define QH_INFO3_TX_RATE_106_7   (2 << 24)
+#define QH_INFO3_TX_RATE_160     (3 << 24)
+#define QH_INFO3_TX_RATE_200     (4 << 24)
+#define QH_INFO3_TX_RATE_320     (5 << 24)
+#define QH_INFO3_TX_RATE_400     (6 << 24)
+#define QH_INFO3_TX_RATE_480     (7 << 24)
+#define QH_INFO3_TX_PWR(p)       ((p) << 29) /* transmit power (see [WUSB] section 5.2.1.2) */
+
+#define QH_STATUS_FLOW_CTRL      (1 << 15)
+#define QH_STATUS_ICUR(i)        ((i) << 5)
+#define QH_STATUS_TO_ICUR(s)     (((s) >> 5) & 0x7)
+
+/**
+ * usb_pipe_to_qh_type - USB core pipe type to QH transfer type
+ *
+ * Returns the QH type field for a USB core pipe type.
+ */
+static inline unsigned usb_pipe_to_qh_type(unsigned pipe)
+{
+	static const unsigned type[] = {
+		[PIPE_ISOCHRONOUS] = QH_INFO1_TR_TYPE_ISOC,
+		[PIPE_INTERRUPT]   = QH_INFO1_TR_TYPE_INT,
+		[PIPE_CONTROL]     = QH_INFO1_TR_TYPE_CTRL,
+		[PIPE_BULK]        = QH_INFO1_TR_TYPE_BULK,
+	};
+	return type[usb_pipetype(pipe)];
+}
+
+/**
+ * Maxiumum number of TDs in a qset.
+ */
+#define WHCI_QSET_TD_MAX 8
+
+/**
+ * struct whc_qset - WUSB data transfers to a specific endpoint
+ * @qh: the QHead of this qset
+ * @qtd: up to 8 qTDs (for qsets for control, bulk and interrupt
+ * transfers)
+ * @itd: up to 8 iTDs (for qsets for isochronous transfers)
+ * @qset_dma: DMA address for this qset
+ * @whc: WHCI HC this qset is for
+ * @ep: endpoint
+ * @stds: list of sTDs queued to this qset
+ * @ntds: number of qTDs queued (not necessarily the same as nTDs
+ * field in the QH)
+ * @td_start: index of the first qTD in the list
+ * @td_end: index of next free qTD in the list (provided
+ *          ntds < WHCI_QSET_TD_MAX)
+ *
+ * Queue Sets (qsets) are added to the asynchronous schedule list
+ * (ASL) or the periodic zone list (PZL).
+ *
+ * qsets may contain up to 8 TDs (either qTDs or iTDs as appropriate).
+ * Each TD may refer to at most 1 MiB of data. If a single transfer
+ * has > 8MiB of data, TDs can be reused as they are completed since
+ * the TD list is used as a circular buffer.  Similarly, several
+ * (smaller) transfers may be queued in a qset.
+ *
+ * WHCI controllers may cache portions of the qsets in the ASL and
+ * PZL, requiring the WHCD to inform the WHC that the lists have been
+ * updated (fields changed or qsets inserted or removed).  For safe
+ * insertion and removal of qsets from the lists the schedule must be
+ * stopped to avoid races in updating the QH link pointers.
+ *
+ * Since the HC is free to execute qsets in any order, all transfers
+ * to an endpoint should use the same qset to ensure transfers are
+ * executed in the order they're submitted.
+ *
+ * [WHCI] section 3.2.3
+ */
+struct whc_qset {
+	struct whc_qhead qh;
+	union {
+		struct whc_qtd qtd[WHCI_QSET_TD_MAX];
+		struct whc_itd itd[WHCI_QSET_TD_MAX];
+	};
+
+	/* private data for WHCD */
+	dma_addr_t qset_dma;
+	struct whc *whc;
+	struct usb_host_endpoint *ep;
+	struct list_head stds;
+	int ntds;
+	int td_start;
+	int td_end;
+	struct list_head list_node;
+	unsigned in_sw_list:1;
+	unsigned in_hw_list:1;
+	unsigned remove:1;
+	struct urb *pause_after_urb;
+	struct completion remove_complete;
+	int max_burst;
+	int max_seq;
+};
+
+static inline void whc_qset_set_link_ptr(u64 *ptr, u64 target)
+{
+	if (target)
+		*ptr = (*ptr & ~(QH_LINK_PTR_MASK | QH_LINK_T)) | QH_LINK_PTR(target);
+	else
+		*ptr = QH_LINK_T;
+}
+
+/**
+ * struct di_buf_entry - Device Information (DI) buffer entry.
+ *
+ * There's one of these per connected device.
+ */
+struct di_buf_entry {
+	__le32 availability_info[8]; /*< MAS availability information, one MAS per bit */
+	__le32 addr_sec_info;        /*< addressing and security info */
+	__le32 reserved[7];
+} __attribute__((packed));
+
+#define WHC_DI_SECURE           (1 << 31)
+#define WHC_DI_DISABLE          (1 << 30)
+#define WHC_DI_KEY_IDX(k)       ((k) << 8)
+#define WHC_DI_KEY_IDX_MASK     0x0000ff00
+#define WHC_DI_DEV_ADDR(a)      ((a) << 0)
+#define WHC_DI_DEV_ADDR_MASK    0x000000ff
+
+/**
+ * struct dn_buf_entry - Device Notification (DN) buffer entry.
+ *
+ * [WHCI] section 3.2.8
+ */
+struct dn_buf_entry {
+	__u8   msg_size;    /*< number of octets of valid DN data */
+	__u8   reserved1;
+	__u8   src_addr;    /*< source address */
+	__u8   status;      /*< buffer entry status */
+	__le32 tkid;        /*< TKID for source device, valid if secure bit is set */
+	__u8   dn_data[56]; /*< up to 56 octets of DN data */
+} __attribute__((packed));
+
+#define WHC_DN_STATUS_VALID  (1 << 7) /* buffer entry is valid */
+#define WHC_DN_STATUS_SECURE (1 << 6) /* notification received using secure frame */
+
+#define WHC_N_DN_ENTRIES (4096 / sizeof(struct dn_buf_entry))
+
+/* The Add MMC IE WUSB Generic Command may take up to 256 bytes of
+   data. [WHCI] section 2.4.7. */
+#define WHC_GEN_CMD_DATA_LEN 256
+
+/*
+ * HC registers.
+ *
+ * [WHCI] section 2.4
+ */
+
+#define WHCIVERSION          0x00
+
+#define WHCSPARAMS           0x04
+#  define WHCSPARAMS_TO_N_MMC_IES(p) (((p) >> 16) & 0xff)
+#  define WHCSPARAMS_TO_N_KEYS(p)    (((p) >> 8) & 0xff)
+#  define WHCSPARAMS_TO_N_DEVICES(p) (((p) >> 0) & 0x7f)
+
+#define WUSBCMD              0x08
+#  define WUSBCMD_BCID(b)            ((b) << 16)
+#  define WUSBCMD_BCID_MASK          (0xff << 16)
+#  define WUSBCMD_ASYNC_QSET_RM      (1 << 12)
+#  define WUSBCMD_PERIODIC_QSET_RM   (1 << 11)
+#  define WUSBCMD_WUSBSI(s)          ((s) << 8)
+#  define WUSBCMD_WUSBSI_MASK        (0x7 << 8)
+#  define WUSBCMD_ASYNC_SYNCED_DB    (1 << 7)
+#  define WUSBCMD_PERIODIC_SYNCED_DB (1 << 6)
+#  define WUSBCMD_ASYNC_UPDATED      (1 << 5)
+#  define WUSBCMD_PERIODIC_UPDATED   (1 << 4)
+#  define WUSBCMD_ASYNC_EN           (1 << 3)
+#  define WUSBCMD_PERIODIC_EN        (1 << 2)
+#  define WUSBCMD_WHCRESET           (1 << 1)
+#  define WUSBCMD_RUN                (1 << 0)
+
+#define WUSBSTS              0x0c
+#  define WUSBSTS_ASYNC_SCHED             (1 << 15)
+#  define WUSBSTS_PERIODIC_SCHED          (1 << 14)
+#  define WUSBSTS_DNTS_SCHED              (1 << 13)
+#  define WUSBSTS_HCHALTED                (1 << 12)
+#  define WUSBSTS_GEN_CMD_DONE            (1 << 9)
+#  define WUSBSTS_CHAN_TIME_ROLLOVER      (1 << 8)
+#  define WUSBSTS_DNTS_OVERFLOW           (1 << 7)
+#  define WUSBSTS_BPST_ADJUSTMENT_CHANGED (1 << 6)
+#  define WUSBSTS_HOST_ERR                (1 << 5)
+#  define WUSBSTS_ASYNC_SCHED_SYNCED      (1 << 4)
+#  define WUSBSTS_PERIODIC_SCHED_SYNCED   (1 << 3)
+#  define WUSBSTS_DNTS_INT                (1 << 2)
+#  define WUSBSTS_ERR_INT                 (1 << 1)
+#  define WUSBSTS_INT                     (1 << 0)
+#  define WUSBSTS_INT_MASK                0x3ff
+
+#define WUSBINTR             0x10
+#  define WUSBINTR_GEN_CMD_DONE             (1 << 9)
+#  define WUSBINTR_CHAN_TIME_ROLLOVER       (1 << 8)
+#  define WUSBINTR_DNTS_OVERFLOW            (1 << 7)
+#  define WUSBINTR_BPST_ADJUSTMENT_CHANGED  (1 << 6)
+#  define WUSBINTR_HOST_ERR                 (1 << 5)
+#  define WUSBINTR_ASYNC_SCHED_SYNCED       (1 << 4)
+#  define WUSBINTR_PERIODIC_SCHED_SYNCED    (1 << 3)
+#  define WUSBINTR_DNTS_INT                 (1 << 2)
+#  define WUSBINTR_ERR_INT                  (1 << 1)
+#  define WUSBINTR_INT                      (1 << 0)
+#  define WUSBINTR_ALL 0x3ff
+
+#define WUSBGENCMDSTS        0x14
+#  define WUSBGENCMDSTS_ACTIVE (1 << 31)
+#  define WUSBGENCMDSTS_ERROR  (1 << 24)
+#  define WUSBGENCMDSTS_IOC    (1 << 23)
+#  define WUSBGENCMDSTS_MMCIE_ADD 0x01
+#  define WUSBGENCMDSTS_MMCIE_RM  0x02
+#  define WUSBGENCMDSTS_SET_MAS   0x03
+#  define WUSBGENCMDSTS_CHAN_STOP 0x04
+#  define WUSBGENCMDSTS_RWP_EN    0x05
+
+#define WUSBGENCMDPARAMS     0x18
+#define WUSBGENADDR          0x20
+#define WUSBASYNCLISTADDR    0x28
+#define WUSBDNTSBUFADDR      0x30
+#define WUSBDEVICEINFOADDR   0x38
+
+#define WUSBSETSECKEYCMD     0x40
+#  define WUSBSETSECKEYCMD_SET    (1 << 31)
+#  define WUSBSETSECKEYCMD_ERASE  (1 << 30)
+#  define WUSBSETSECKEYCMD_GTK    (1 << 8)
+#  define WUSBSETSECKEYCMD_IDX(i) ((i) << 0)
+
+#define WUSBTKID             0x44
+#define WUSBSECKEY           0x48
+#define WUSBPERIODICLISTBASE 0x58
+#define WUSBMASINDEX         0x60
+
+#define WUSBDNTSCTRL         0x64
+#  define WUSBDNTSCTRL_ACTIVE      (1 << 31)
+#  define WUSBDNTSCTRL_INTERVAL(i) ((i) << 8)
+#  define WUSBDNTSCTRL_SLOTS(s)    ((s) << 0)
+
+#define WUSBTIME             0x68
+#define WUSBBPST             0x6c
+#define WUSBDIBUPDATED       0x70
+
+#endif /* #ifndef _WHCI_WHCI_HC_H */
diff --git a/drivers/usb/host/whci/wusb.c b/drivers/usb/host/whci/wusb.c
new file mode 100644
index 0000000..66e4ddc
--- /dev/null
+++ b/drivers/usb/host/whci/wusb.c
@@ -0,0 +1,241 @@
+/*
+ * Wireless Host Controller (WHC) WUSB operations.
+ *
+ * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/uwb/umc.h>
+#define D_LOCAL 1
+#include <linux/uwb/debug.h>
+
+#include "../../wusbcore/wusbhc.h"
+
+#include "whcd.h"
+
+#if D_LOCAL >= 1
+static void dump_di(struct whc *whc, int idx)
+{
+	struct di_buf_entry *di = &whc->di_buf[idx];
+	struct device *dev = &whc->umc->dev;
+	char buf[128];
+
+	bitmap_scnprintf(buf, sizeof(buf), (unsigned long *)di->availability_info, UWB_NUM_MAS);
+
+	d_printf(1, dev, "DI[%d]\n", idx);
+	d_printf(1, dev, "  availability: %s\n", buf);
+	d_printf(1, dev, "  %c%c key idx: %d dev addr: %d\n",
+		 (di->addr_sec_info & WHC_DI_SECURE) ? 'S' : ' ',
+		 (di->addr_sec_info & WHC_DI_DISABLE) ? 'D' : ' ',
+		 (di->addr_sec_info & WHC_DI_KEY_IDX_MASK) >> 8,
+		 (di->addr_sec_info & WHC_DI_DEV_ADDR_MASK));
+}
+#else
+static inline void dump_di(struct whc *whc, int idx)
+{
+}
+#endif
+
+static int whc_update_di(struct whc *whc, int idx)
+{
+	int offset = idx / 32;
+	u32 bit = 1 << (idx % 32);
+
+	dump_di(whc, idx);
+
+	le_writel(bit, whc->base + WUSBDIBUPDATED + offset);
+
+	return whci_wait_for(&whc->umc->dev,
+			     whc->base + WUSBDIBUPDATED + offset, bit, 0,
+			     100, "DI update");
+}
+
+/*
+ * WHCI starts and stops MMCs based on there being a valid GTK so
+ * these need only start/stop the asynchronous and periodic schedules.
+ */
+
+int whc_wusbhc_start(struct wusbhc *wusbhc)
+{
+	struct whc *whc = wusbhc_to_whc(wusbhc);
+
+	asl_start(whc);
+	pzl_start(whc);
+
+	return 0;
+}
+
+void whc_wusbhc_stop(struct wusbhc *wusbhc)
+{
+	struct whc *whc = wusbhc_to_whc(wusbhc);
+
+	pzl_stop(whc);
+	asl_stop(whc);
+}
+
+int whc_mmcie_add(struct wusbhc *wusbhc, u8 interval, u8 repeat_cnt,
+		  u8 handle, struct wuie_hdr *wuie)
+{
+	struct whc *whc = wusbhc_to_whc(wusbhc);
+	u32 params;
+
+	params = (interval << 24)
+		| (repeat_cnt << 16)
+		| (wuie->bLength << 8)
+		| handle;
+
+	return whc_do_gencmd(whc, WUSBGENCMDSTS_MMCIE_ADD, params, wuie, wuie->bLength);
+}
+
+int whc_mmcie_rm(struct wusbhc *wusbhc, u8 handle)
+{
+	struct whc *whc = wusbhc_to_whc(wusbhc);
+	u32 params;
+
+	params = handle;
+
+	return whc_do_gencmd(whc, WUSBGENCMDSTS_MMCIE_RM, params, NULL, 0);
+}
+
+int whc_bwa_set(struct wusbhc *wusbhc, s8 stream_index, const struct uwb_mas_bm *mas_bm)
+{
+	struct whc *whc = wusbhc_to_whc(wusbhc);
+
+	if (stream_index >= 0)
+		whc_write_wusbcmd(whc, WUSBCMD_WUSBSI_MASK, WUSBCMD_WUSBSI(stream_index));
+
+	return whc_do_gencmd(whc, WUSBGENCMDSTS_SET_MAS, 0, (void *)mas_bm, sizeof(*mas_bm));
+}
+
+int whc_dev_info_set(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev)
+{
+	struct whc *whc = wusbhc_to_whc(wusbhc);
+	int idx = wusb_dev->port_idx;
+	struct di_buf_entry *di = &whc->di_buf[idx];
+	int ret;
+
+	mutex_lock(&whc->mutex);
+
+	uwb_mas_bm_copy_le(di->availability_info, &wusb_dev->availability);
+	di->addr_sec_info &= ~(WHC_DI_DISABLE | WHC_DI_DEV_ADDR_MASK);
+	di->addr_sec_info |= WHC_DI_DEV_ADDR(wusb_dev->addr);
+
+	ret = whc_update_di(whc, idx);
+
+	mutex_unlock(&whc->mutex);
+
+	return ret;
+}
+
+/*
+ * Set the number of Device Notification Time Slots (DNTS) and enable
+ * device notifications.
+ */
+int whc_set_num_dnts(struct wusbhc *wusbhc, u8 interval, u8 slots)
+{
+	struct whc *whc = wusbhc_to_whc(wusbhc);
+	u32 dntsctrl;
+
+	dntsctrl = WUSBDNTSCTRL_ACTIVE
+		| WUSBDNTSCTRL_INTERVAL(interval)
+		| WUSBDNTSCTRL_SLOTS(slots);
+
+	le_writel(dntsctrl, whc->base + WUSBDNTSCTRL);
+
+	return 0;
+}
+
+static int whc_set_key(struct whc *whc, u8 key_index, uint32_t tkid,
+		       const void *key, size_t key_size, bool is_gtk)
+{
+	uint32_t setkeycmd;
+	uint32_t seckey[4];
+	int i;
+	int ret;
+
+	memcpy(seckey, key, key_size);
+	setkeycmd = WUSBSETSECKEYCMD_SET | WUSBSETSECKEYCMD_IDX(key_index);
+	if (is_gtk)
+		setkeycmd |= WUSBSETSECKEYCMD_GTK;
+
+	le_writel(tkid, whc->base + WUSBTKID);
+	for (i = 0; i < 4; i++)
+		le_writel(seckey[i], whc->base + WUSBSECKEY + 4*i);
+	le_writel(setkeycmd, whc->base + WUSBSETSECKEYCMD);
+
+	ret = whci_wait_for(&whc->umc->dev, whc->base + WUSBSETSECKEYCMD,
+			    WUSBSETSECKEYCMD_SET, 0, 100, "set key");
+
+	return ret;
+}
+
+/**
+ * whc_set_ptk - set the PTK to use for a device.
+ *
+ * The index into the key table for this PTK is the same as the
+ * device's port index.
+ */
+int whc_set_ptk(struct wusbhc *wusbhc, u8 port_idx, u32 tkid,
+		const void *ptk, size_t key_size)
+{
+	struct whc *whc = wusbhc_to_whc(wusbhc);
+	struct di_buf_entry *di = &whc->di_buf[port_idx];
+	int ret;
+
+	mutex_lock(&whc->mutex);
+
+	if (ptk) {
+		ret = whc_set_key(whc, port_idx, tkid, ptk, key_size, false);
+		if (ret)
+			goto out;
+
+		di->addr_sec_info &= ~WHC_DI_KEY_IDX_MASK;
+		di->addr_sec_info |= WHC_DI_SECURE | WHC_DI_KEY_IDX(port_idx);
+	} else
+		di->addr_sec_info &= ~WHC_DI_SECURE;
+
+	ret = whc_update_di(whc, port_idx);
+out:
+	mutex_unlock(&whc->mutex);
+	return ret;
+}
+
+/**
+ * whc_set_gtk - set the GTK for subsequent broadcast packets
+ *
+ * The GTK is stored in the last entry in the key table (the previous
+ * N_DEVICES entries are for the per-device PTKs).
+ */
+int whc_set_gtk(struct wusbhc *wusbhc, u32 tkid,
+		const void *gtk, size_t key_size)
+{
+	struct whc *whc = wusbhc_to_whc(wusbhc);
+	int ret;
+
+	mutex_lock(&whc->mutex);
+
+	ret = whc_set_key(whc, whc->n_devices, tkid, gtk, key_size, true);
+
+	mutex_unlock(&whc->mutex);
+
+	return ret;
+}
+
+int whc_set_cluster_id(struct whc *whc, u8 bcid)
+{
+	whc_write_wusbcmd(whc, WUSBCMD_BCID_MASK, WUSBCMD_BCID(bcid));
+	return 0;
+}
diff --git a/drivers/usb/wusbcore/Kconfig b/drivers/usb/wusbcore/Kconfig
new file mode 100644
index 0000000..eb09a0a
--- /dev/null
+++ b/drivers/usb/wusbcore/Kconfig
@@ -0,0 +1,41 @@
+#
+# Wireless USB Core configuration
+#
+config USB_WUSB
+	tristate "Enable Wireless USB extensions (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	depends on USB
+        select UWB
+        select CRYPTO
+        select CRYPTO_BLKCIPHER
+        select CRYPTO_CBC
+        select CRYPTO_MANAGER
+        select CRYPTO_AES
+	help
+	  Enable the host-side support for Wireless USB.
+
+          To compile this support select Y (built in). It is safe to
+	  select even if you don't have the hardware.
+
+config USB_WUSB_CBAF
+	tristate "Support WUSB Cable Based Association (CBA)"
+	depends on USB
+	help
+	  Some WUSB devices support Cable Based Association. It's used to
+	  enable the secure communication between the host and the
+	  device.
+
+	  Enable this option if your WUSB device must to be connected
+	  via wired USB before establishing a wireless link.
+
+	  It is safe to select even if you don't have a compatible
+	  hardware.
+
+config USB_WUSB_CBAF_DEBUG
+	bool "Enable CBA debug messages"
+	depends on USB_WUSB_CBAF
+	help
+	  Say Y here if you want the CBA to produce a bunch of debug messages
+	  to the system log. Select this if you are having a problem with
+	  CBA support and want to see more of what is going on.
+
diff --git a/drivers/usb/wusbcore/Makefile b/drivers/usb/wusbcore/Makefile
new file mode 100644
index 0000000..75f1ade
--- /dev/null
+++ b/drivers/usb/wusbcore/Makefile
@@ -0,0 +1,26 @@
+obj-$(CONFIG_USB_WUSB)		+= wusbcore.o
+obj-$(CONFIG_USB_HWA_HCD)	+= wusb-wa.o
+obj-$(CONFIG_USB_WUSB_CBAF)	+= wusb-cbaf.o
+
+
+wusbcore-objs := 	\
+	crypto.o	\
+	devconnect.o	\
+	dev-sysfs.o	\
+	mmc.o		\
+	pal.o		\
+	rh.o		\
+	reservation.o	\
+	security.o	\
+	wusbhc.o
+
+wusb-cbaf-objs := cbaf.o
+
+wusb-wa-objs :=	wa-hc.o		\
+		wa-nep.o	\
+		wa-rpipe.o	\
+		wa-xfer.o
+
+ifeq ($(CONFIG_USB_WUSB_CBAF_DEBUG),y)
+EXTRA_CFLAGS += -DDEBUG
+endif
diff --git a/drivers/usb/wusbcore/cbaf.c b/drivers/usb/wusbcore/cbaf.c
new file mode 100644
index 0000000..ab4788d
--- /dev/null
+++ b/drivers/usb/wusbcore/cbaf.c
@@ -0,0 +1,673 @@
+/*
+ * Wireless USB - Cable Based Association
+ *
+ *
+ * Copyright (C) 2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ * Copyright (C) 2008 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * WUSB devices have to be paired (associated in WUSB lingo) so
+ * that they can connect to the system.
+ *
+ * One way of pairing is using CBA-Cable Based Association. First
+ * time you plug the device with a cable, association is done between
+ * host and device and subsequent times, you can connect wirelessly
+ * without having to associate again. That's the idea.
+ *
+ * This driver does nothing Earth shattering. It just provides an
+ * interface to chat with the wire-connected device so we can get a
+ * CDID (device ID) that might have been previously associated to a
+ * CHID (host ID) and to set up a new <CHID,CDID,CK> triplet
+ * (connection context), with the CK being the secret, or connection
+ * key. This is the pairing data.
+ *
+ * When a device with the CBA capability connects, the probe routine
+ * just creates a bunch of sysfs files that a user space enumeration
+ * manager uses to allow it to connect wirelessly to the system or not.
+ *
+ * The process goes like this:
+ *
+ * 1. Device plugs, cbaf is loaded, notifications happen.
+ *
+ * 2. The connection manager (CM) sees a device with CBAF capability
+ *    (the wusb_chid etc. files in /sys/devices/blah/OURDEVICE).
+ *
+ * 3. The CM writes the host name, supported band groups, and the CHID
+ *    (host ID) into the wusb_host_name, wusb_host_band_groups and
+ *    wusb_chid files. These get sent to the device and the CDID (if
+ *    any) for this host is requested.
+ *
+ * 4. The CM can verify that the device's supported band groups
+ *    (wusb_device_band_groups) are compatible with the host.
+ *
+ * 5. The CM reads the wusb_cdid file.
+ *
+ * 6. The CM looks up its database
+ *
+ * 6.1 If it has a matching CHID,CDID entry, the device has been
+ *     authorized before (paired) and nothing further needs to be
+ *     done.
+ *
+ * 6.2 If the CDID is zero (or the CM doesn't find a matching CDID in
+ *     its database), the device is assumed to be not known.  The CM
+ *     may associate the host with device by: writing a randomly
+ *     generated CDID to wusb_cdid and then a random CK to wusb_ck
+ *     (this uploads the new CC to the device).
+ *
+ *     CMD may choose to prompt the user before associating with a new
+ *     device.
+ *
+ * 7. Device is unplugged.
+ *
+ * When the device tries to connect wirelessly, it will present its
+ * CDID to the WUSB host controller.  The CM will query the
+ * database. If the CHID/CDID pair found, it will (with a 4-way
+ * handshake) challenge the device to demonstrate it has the CK secret
+ * key (from our database) without actually exchanging it. Once
+ * satisfied, crypto keys are derived from the CK, the device is
+ * connected and all communication is encrypted.
+ *
+ * References:
+ *   [WUSB-AM] Association Models Supplement to the Certified Wireless
+ *             Universal Serial Bus Specification, version 1.0.
+ */
+#include <linux/module.h>
+#include <linux/ctype.h>
+#include <linux/version.h>
+#include <linux/usb.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/random.h>
+#include <linux/mutex.h>
+#include <linux/uwb.h>
+#include <linux/usb/wusb.h>
+#include <linux/usb/association.h>
+
+#define CBA_NAME_LEN 0x40 /* [WUSB-AM] table 4-7 */
+
+/* An instance of a Cable-Based-Association-Framework device */
+struct cbaf {
+	struct usb_device *usb_dev;
+	struct usb_interface *usb_iface;
+	void *buffer;
+	size_t buffer_size;
+
+	struct wusb_ckhdid chid;
+	char host_name[CBA_NAME_LEN];
+	u16 host_band_groups;
+
+	struct wusb_ckhdid cdid;
+	char device_name[CBA_NAME_LEN];
+	u16 device_band_groups;
+
+	struct wusb_ckhdid ck;
+};
+
+/*
+ * Verify that a CBAF USB-interface has what we need
+ *
+ * According to [WUSB-AM], CBA devices should provide at least two
+ * interfaces:
+ *  - RETRIEVE_HOST_INFO
+ *  - ASSOCIATE
+ *
+ * If the device doesn't provide these interfaces, we do not know how
+ * to deal with it.
+ */
+static int cbaf_check(struct cbaf *cbaf)
+{
+	int result;
+	struct device *dev = &cbaf->usb_iface->dev;
+	struct wusb_cbaf_assoc_info *assoc_info;
+	struct wusb_cbaf_assoc_request *assoc_request;
+	size_t assoc_size;
+	void *itr, *top;
+	int ar_rhi = 0, ar_assoc = 0;
+
+	result = usb_control_msg(
+		cbaf->usb_dev, usb_rcvctrlpipe(cbaf->usb_dev, 0),
+		CBAF_REQ_GET_ASSOCIATION_INFORMATION,
+		USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+		0, cbaf->usb_iface->cur_altsetting->desc.bInterfaceNumber,
+		cbaf->buffer, cbaf->buffer_size, 1000 /* FIXME: arbitrary */);
+	if (result < 0) {
+		dev_err(dev, "Cannot get available association types: %d\n",
+			result);
+		return result;
+	}
+
+	assoc_info = cbaf->buffer;
+	if (result < sizeof(*assoc_info)) {
+		dev_err(dev, "Not enough data to decode association info "
+			"header (%zu vs %zu bytes required)\n",
+			(size_t)result, sizeof(*assoc_info));
+		return result;
+	}
+
+	assoc_size = le16_to_cpu(assoc_info->Length);
+	if (result < assoc_size) {
+		dev_err(dev, "Not enough data to decode association info "
+			"(%zu vs %zu bytes required)\n",
+			(size_t)assoc_size, sizeof(*assoc_info));
+		return result;
+	}
+	/*
+	 * From now on, we just verify, but won't error out unless we
+	 * don't find the AR_TYPE_WUSB_{RETRIEVE_HOST_INFO,ASSOCIATE}
+	 * types.
+	 */
+	itr = cbaf->buffer + sizeof(*assoc_info);
+	top = cbaf->buffer + assoc_size;
+	dev_dbg(dev, "Found %u association requests (%zu bytes)\n",
+		 assoc_info->NumAssociationRequests, assoc_size);
+
+	while (itr < top) {
+		u16 ar_type, ar_subtype;
+		u32 ar_size;
+		const char *ar_name;
+
+		assoc_request = itr;
+
+		if (top - itr < sizeof(*assoc_request)) {
+			dev_err(dev, "Not enough data to decode associaton "
+				"request (%zu vs %zu bytes needed)\n",
+				top - itr, sizeof(*assoc_request));
+			break;
+		}
+
+		ar_type = le16_to_cpu(assoc_request->AssociationTypeId);
+		ar_subtype = le16_to_cpu(assoc_request->AssociationSubTypeId);
+		ar_size = le32_to_cpu(assoc_request->AssociationTypeInfoSize);
+		ar_name = "unknown";
+
+		switch (ar_type) {
+		case AR_TYPE_WUSB:
+			/* Verify we have what is mandated by [WUSB-AM]. */
+			switch (ar_subtype) {
+			case AR_TYPE_WUSB_RETRIEVE_HOST_INFO:
+				ar_name = "RETRIEVE_HOST_INFO";
+				ar_rhi = 1;
+				break;
+			case AR_TYPE_WUSB_ASSOCIATE:
+				/* send assoc data */
+				ar_name = "ASSOCIATE";
+				ar_assoc = 1;
+				break;
+			};
+			break;
+		};
+
+		dev_dbg(dev, "Association request #%02u: 0x%04x/%04x "
+			 "(%zu bytes): %s\n",
+			 assoc_request->AssociationDataIndex, ar_type,
+			 ar_subtype, (size_t)ar_size, ar_name);
+
+		itr += sizeof(*assoc_request);
+	}
+
+	if (!ar_rhi) {
+		dev_err(dev, "Missing RETRIEVE_HOST_INFO association "
+			"request\n");
+		return -EINVAL;
+	}
+	if (!ar_assoc) {
+		dev_err(dev, "Missing ASSOCIATE association request\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static const struct wusb_cbaf_host_info cbaf_host_info_defaults = {
+	.AssociationTypeId_hdr    = WUSB_AR_AssociationTypeId,
+	.AssociationTypeId    	  = cpu_to_le16(AR_TYPE_WUSB),
+	.AssociationSubTypeId_hdr = WUSB_AR_AssociationSubTypeId,
+	.AssociationSubTypeId = cpu_to_le16(AR_TYPE_WUSB_RETRIEVE_HOST_INFO),
+	.CHID_hdr                 = WUSB_AR_CHID,
+	.LangID_hdr               = WUSB_AR_LangID,
+	.HostFriendlyName_hdr     = WUSB_AR_HostFriendlyName,
+};
+
+/* Send WUSB host information (CHID and name) to a CBAF device */
+static int cbaf_send_host_info(struct cbaf *cbaf)
+{
+	struct wusb_cbaf_host_info *hi;
+	size_t name_len;
+	size_t hi_size;
+
+	hi = cbaf->buffer;
+	memset(hi, 0, sizeof(*hi));
+	*hi = cbaf_host_info_defaults;
+	hi->CHID = cbaf->chid;
+	hi->LangID = 0;	/* FIXME: I guess... */
+	strlcpy(hi->HostFriendlyName, cbaf->host_name, CBA_NAME_LEN);
+	name_len = strlen(cbaf->host_name);
+	hi->HostFriendlyName_hdr.len = cpu_to_le16(name_len);
+	hi_size = sizeof(*hi) + name_len;
+
+	return usb_control_msg(cbaf->usb_dev, usb_sndctrlpipe(cbaf->usb_dev, 0),
+			CBAF_REQ_SET_ASSOCIATION_RESPONSE,
+			USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+			0x0101,
+			cbaf->usb_iface->cur_altsetting->desc.bInterfaceNumber,
+			hi, hi_size, 1000 /* FIXME: arbitrary */);
+}
+
+/*
+ * Get device's information (CDID) associated to CHID
+ *
+ * The device will return it's information (CDID, name, bandgroups)
+ * associated to the CHID we have set before, or 0 CDID and default
+ * name and bandgroup if no CHID set or unknown.
+ */
+static int cbaf_cdid_get(struct cbaf *cbaf)
+{
+	int result;
+	struct device *dev = &cbaf->usb_iface->dev;
+	struct wusb_cbaf_device_info *di;
+	size_t needed;
+
+	di = cbaf->buffer;
+	result = usb_control_msg(
+		cbaf->usb_dev, usb_rcvctrlpipe(cbaf->usb_dev, 0),
+		CBAF_REQ_GET_ASSOCIATION_REQUEST,
+		USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+		0x0200, cbaf->usb_iface->cur_altsetting->desc.bInterfaceNumber,
+		di, cbaf->buffer_size, 1000 /* FIXME: arbitrary */);
+	if (result < 0) {
+		dev_err(dev, "Cannot request device information: %d\n", result);
+		return result;
+	}
+
+	needed = result < sizeof(*di) ? sizeof(*di) : le32_to_cpu(di->Length);
+	if (result < needed) {
+		dev_err(dev, "Not enough data in DEVICE_INFO reply (%zu vs "
+			"%zu bytes needed)\n", (size_t)result, needed);
+		return result;
+	}
+
+	strlcpy(cbaf->device_name, di->DeviceFriendlyName, CBA_NAME_LEN);
+	cbaf->cdid = di->CDID;
+	cbaf->device_band_groups = le16_to_cpu(di->BandGroups);
+
+	return 0;
+}
+
+static ssize_t cbaf_wusb_chid_show(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct usb_interface *iface = to_usb_interface(dev);
+	struct cbaf *cbaf = usb_get_intfdata(iface);
+	char pr_chid[WUSB_CKHDID_STRSIZE];
+
+	ckhdid_printf(pr_chid, sizeof(pr_chid), &cbaf->chid);
+	return scnprintf(buf, PAGE_SIZE, "%s\n", pr_chid);
+}
+
+static ssize_t cbaf_wusb_chid_store(struct device *dev,
+					 struct device_attribute *attr,
+					 const char *buf, size_t size)
+{
+	ssize_t result;
+	struct usb_interface *iface = to_usb_interface(dev);
+	struct cbaf *cbaf = usb_get_intfdata(iface);
+
+	result = sscanf(buf,
+			"%02hhx %02hhx %02hhx %02hhx "
+			"%02hhx %02hhx %02hhx %02hhx "
+			"%02hhx %02hhx %02hhx %02hhx "
+			"%02hhx %02hhx %02hhx %02hhx",
+			&cbaf->chid.data[0] , &cbaf->chid.data[1],
+			&cbaf->chid.data[2] , &cbaf->chid.data[3],
+			&cbaf->chid.data[4] , &cbaf->chid.data[5],
+			&cbaf->chid.data[6] , &cbaf->chid.data[7],
+			&cbaf->chid.data[8] , &cbaf->chid.data[9],
+			&cbaf->chid.data[10], &cbaf->chid.data[11],
+			&cbaf->chid.data[12], &cbaf->chid.data[13],
+			&cbaf->chid.data[14], &cbaf->chid.data[15]);
+
+	if (result != 16)
+		return -EINVAL;
+
+	result = cbaf_send_host_info(cbaf);
+	if (result < 0)
+		return result;
+	result = cbaf_cdid_get(cbaf);
+	if (result < 0)
+		return -result;
+	return size;
+}
+static DEVICE_ATTR(wusb_chid, 0600, cbaf_wusb_chid_show, cbaf_wusb_chid_store);
+
+static ssize_t cbaf_wusb_host_name_show(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct usb_interface *iface = to_usb_interface(dev);
+	struct cbaf *cbaf = usb_get_intfdata(iface);
+
+	return scnprintf(buf, PAGE_SIZE, "%s\n", cbaf->host_name);
+}
+
+static ssize_t cbaf_wusb_host_name_store(struct device *dev,
+					 struct device_attribute *attr,
+					 const char *buf, size_t size)
+{
+	ssize_t result;
+	struct usb_interface *iface = to_usb_interface(dev);
+	struct cbaf *cbaf = usb_get_intfdata(iface);
+
+	result = sscanf(buf, "%63s", cbaf->host_name);
+	if (result != 1)
+		return -EINVAL;
+
+	return size;
+}
+static DEVICE_ATTR(wusb_host_name, 0600, cbaf_wusb_host_name_show,
+					 cbaf_wusb_host_name_store);
+
+static ssize_t cbaf_wusb_host_band_groups_show(struct device *dev,
+					       struct device_attribute *attr,
+					       char *buf)
+{
+	struct usb_interface *iface = to_usb_interface(dev);
+	struct cbaf *cbaf = usb_get_intfdata(iface);
+
+	return scnprintf(buf, PAGE_SIZE, "0x%04x\n", cbaf->host_band_groups);
+}
+
+static ssize_t cbaf_wusb_host_band_groups_store(struct device *dev,
+						struct device_attribute *attr,
+						const char *buf, size_t size)
+{
+	ssize_t result;
+	struct usb_interface *iface = to_usb_interface(dev);
+	struct cbaf *cbaf = usb_get_intfdata(iface);
+	u16 band_groups = 0;
+
+	result = sscanf(buf, "%04hx", &band_groups);
+	if (result != 1)
+		return -EINVAL;
+
+	cbaf->host_band_groups = band_groups;
+
+	return size;
+}
+
+static DEVICE_ATTR(wusb_host_band_groups, 0600,
+		   cbaf_wusb_host_band_groups_show,
+		   cbaf_wusb_host_band_groups_store);
+
+static const struct wusb_cbaf_device_info cbaf_device_info_defaults = {
+	.Length_hdr               = WUSB_AR_Length,
+	.CDID_hdr                 = WUSB_AR_CDID,
+	.BandGroups_hdr           = WUSB_AR_BandGroups,
+	.LangID_hdr               = WUSB_AR_LangID,
+	.DeviceFriendlyName_hdr   = WUSB_AR_DeviceFriendlyName,
+};
+
+static ssize_t cbaf_wusb_cdid_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct usb_interface *iface = to_usb_interface(dev);
+	struct cbaf *cbaf = usb_get_intfdata(iface);
+	char pr_cdid[WUSB_CKHDID_STRSIZE];
+
+	ckhdid_printf(pr_cdid, sizeof(pr_cdid), &cbaf->cdid);
+	return scnprintf(buf, PAGE_SIZE, "%s\n", pr_cdid);
+}
+
+static ssize_t cbaf_wusb_cdid_store(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t size)
+{
+	ssize_t result;
+	struct usb_interface *iface = to_usb_interface(dev);
+	struct cbaf *cbaf = usb_get_intfdata(iface);
+	struct wusb_ckhdid cdid;
+
+	result = sscanf(buf,
+			"%02hhx %02hhx %02hhx %02hhx "
+			"%02hhx %02hhx %02hhx %02hhx "
+			"%02hhx %02hhx %02hhx %02hhx "
+			"%02hhx %02hhx %02hhx %02hhx",
+			&cdid.data[0] , &cdid.data[1],
+			&cdid.data[2] , &cdid.data[3],
+			&cdid.data[4] , &cdid.data[5],
+			&cdid.data[6] , &cdid.data[7],
+			&cdid.data[8] , &cdid.data[9],
+			&cdid.data[10], &cdid.data[11],
+			&cdid.data[12], &cdid.data[13],
+			&cdid.data[14], &cdid.data[15]);
+	if (result != 16)
+		return -EINVAL;
+
+	cbaf->cdid = cdid;
+
+	return size;
+}
+static DEVICE_ATTR(wusb_cdid, 0600, cbaf_wusb_cdid_show, cbaf_wusb_cdid_store);
+
+static ssize_t cbaf_wusb_device_band_groups_show(struct device *dev,
+						 struct device_attribute *attr,
+						 char *buf)
+{
+	struct usb_interface *iface = to_usb_interface(dev);
+	struct cbaf *cbaf = usb_get_intfdata(iface);
+
+	return scnprintf(buf, PAGE_SIZE, "0x%04x\n", cbaf->device_band_groups);
+}
+
+static DEVICE_ATTR(wusb_device_band_groups, 0600,
+		   cbaf_wusb_device_band_groups_show,
+		   NULL);
+
+static ssize_t cbaf_wusb_device_name_show(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct usb_interface *iface = to_usb_interface(dev);
+	struct cbaf *cbaf = usb_get_intfdata(iface);
+
+	return scnprintf(buf, PAGE_SIZE, "%s\n", cbaf->device_name);
+}
+static DEVICE_ATTR(wusb_device_name, 0600, cbaf_wusb_device_name_show, NULL);
+
+static const struct wusb_cbaf_cc_data cbaf_cc_data_defaults = {
+	.AssociationTypeId_hdr    = WUSB_AR_AssociationTypeId,
+	.AssociationTypeId    	  = cpu_to_le16(AR_TYPE_WUSB),
+	.AssociationSubTypeId_hdr = WUSB_AR_AssociationSubTypeId,
+	.AssociationSubTypeId     = cpu_to_le16(AR_TYPE_WUSB_ASSOCIATE),
+	.Length_hdr               = WUSB_AR_Length,
+	.Length               	  = cpu_to_le32(sizeof(struct wusb_cbaf_cc_data)),
+	.ConnectionContext_hdr    = WUSB_AR_ConnectionContext,
+	.BandGroups_hdr           = WUSB_AR_BandGroups,
+};
+
+static const struct wusb_cbaf_cc_data_fail cbaf_cc_data_fail_defaults = {
+	.AssociationTypeId_hdr    = WUSB_AR_AssociationTypeId,
+	.AssociationSubTypeId_hdr = WUSB_AR_AssociationSubTypeId,
+	.Length_hdr               = WUSB_AR_Length,
+	.AssociationStatus_hdr    = WUSB_AR_AssociationStatus,
+};
+
+/*
+ * Send a new CC to the device.
+ */
+static int cbaf_cc_upload(struct cbaf *cbaf)
+{
+	int result;
+	struct device *dev = &cbaf->usb_iface->dev;
+	struct wusb_cbaf_cc_data *ccd;
+	char pr_cdid[WUSB_CKHDID_STRSIZE];
+
+	ccd =  cbaf->buffer;
+	*ccd = cbaf_cc_data_defaults;
+	ccd->CHID = cbaf->chid;
+	ccd->CDID = cbaf->cdid;
+	ccd->CK = cbaf->ck;
+	ccd->BandGroups = cpu_to_le16(cbaf->host_band_groups);
+
+	dev_dbg(dev, "Trying to upload CC:\n");
+	ckhdid_printf(pr_cdid, sizeof(pr_cdid), &ccd->CHID);
+	dev_dbg(dev, "  CHID       %s\n", pr_cdid);
+	ckhdid_printf(pr_cdid, sizeof(pr_cdid), &ccd->CDID);
+	dev_dbg(dev, "  CDID       %s\n", pr_cdid);
+	dev_dbg(dev, "  Bandgroups 0x%04x\n", cbaf->host_band_groups);
+
+	result = usb_control_msg(
+		cbaf->usb_dev, usb_sndctrlpipe(cbaf->usb_dev, 0),
+		CBAF_REQ_SET_ASSOCIATION_RESPONSE,
+		USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+		0x0201, cbaf->usb_iface->cur_altsetting->desc.bInterfaceNumber,
+		ccd, sizeof(*ccd), 1000 /* FIXME: arbitrary */);
+
+	return result;
+}
+
+static ssize_t cbaf_wusb_ck_store(struct device *dev,
+				  struct device_attribute *attr,
+				  const char *buf, size_t size)
+{
+	ssize_t result;
+	struct usb_interface *iface = to_usb_interface(dev);
+	struct cbaf *cbaf = usb_get_intfdata(iface);
+
+	result = sscanf(buf,
+			"%02hhx %02hhx %02hhx %02hhx "
+			"%02hhx %02hhx %02hhx %02hhx "
+			"%02hhx %02hhx %02hhx %02hhx "
+			"%02hhx %02hhx %02hhx %02hhx",
+			&cbaf->ck.data[0] , &cbaf->ck.data[1],
+			&cbaf->ck.data[2] , &cbaf->ck.data[3],
+			&cbaf->ck.data[4] , &cbaf->ck.data[5],
+			&cbaf->ck.data[6] , &cbaf->ck.data[7],
+			&cbaf->ck.data[8] , &cbaf->ck.data[9],
+			&cbaf->ck.data[10], &cbaf->ck.data[11],
+			&cbaf->ck.data[12], &cbaf->ck.data[13],
+			&cbaf->ck.data[14], &cbaf->ck.data[15]);
+	if (result != 16)
+		return -EINVAL;
+
+	result = cbaf_cc_upload(cbaf);
+	if (result < 0)
+		return result;
+
+	return size;
+}
+static DEVICE_ATTR(wusb_ck, 0600, NULL, cbaf_wusb_ck_store);
+
+static struct attribute *cbaf_dev_attrs[] = {
+	&dev_attr_wusb_host_name.attr,
+	&dev_attr_wusb_host_band_groups.attr,
+	&dev_attr_wusb_chid.attr,
+	&dev_attr_wusb_cdid.attr,
+	&dev_attr_wusb_device_name.attr,
+	&dev_attr_wusb_device_band_groups.attr,
+	&dev_attr_wusb_ck.attr,
+	NULL,
+};
+
+static struct attribute_group cbaf_dev_attr_group = {
+	.name = NULL,	/* we want them in the same directory */
+	.attrs = cbaf_dev_attrs,
+};
+
+static int cbaf_probe(struct usb_interface *iface,
+		      const struct usb_device_id *id)
+{
+	struct cbaf *cbaf;
+	struct device *dev = &iface->dev;
+	int result = -ENOMEM;
+
+	cbaf = kzalloc(sizeof(*cbaf), GFP_KERNEL);
+	if (cbaf == NULL)
+		goto error_kzalloc;
+	cbaf->buffer = kmalloc(512, GFP_KERNEL);
+	if (cbaf->buffer == NULL)
+		goto error_kmalloc_buffer;
+
+	cbaf->buffer_size = 512;
+	cbaf->usb_dev = usb_get_dev(interface_to_usbdev(iface));
+	cbaf->usb_iface = usb_get_intf(iface);
+	result = cbaf_check(cbaf);
+	if (result < 0) {
+		dev_err(dev, "This device is not WUSB-CBAF compliant"
+			"and is not supported yet.\n");
+		goto error_check;
+	}
+
+	result = sysfs_create_group(&dev->kobj, &cbaf_dev_attr_group);
+	if (result < 0) {
+		dev_err(dev, "Can't register sysfs attr group: %d\n", result);
+		goto error_create_group;
+	}
+	usb_set_intfdata(iface, cbaf);
+	return 0;
+
+error_create_group:
+error_check:
+	kfree(cbaf->buffer);
+error_kmalloc_buffer:
+	kfree(cbaf);
+error_kzalloc:
+	return result;
+}
+
+static void cbaf_disconnect(struct usb_interface *iface)
+{
+	struct cbaf *cbaf = usb_get_intfdata(iface);
+	struct device *dev = &iface->dev;
+	sysfs_remove_group(&dev->kobj, &cbaf_dev_attr_group);
+	usb_set_intfdata(iface, NULL);
+	usb_put_intf(iface);
+	kfree(cbaf->buffer);
+	/* paranoia: clean up crypto keys */
+	memset(cbaf, 0, sizeof(*cbaf));
+	kfree(cbaf);
+}
+
+static struct usb_device_id cbaf_id_table[] = {
+	{ USB_INTERFACE_INFO(0xef, 0x03, 0x01), },
+	{ },
+};
+MODULE_DEVICE_TABLE(usb, cbaf_id_table);
+
+static struct usb_driver cbaf_driver = {
+	.name =		"wusb-cbaf",
+	.id_table =	cbaf_id_table,
+	.probe =	cbaf_probe,
+	.disconnect =	cbaf_disconnect,
+};
+
+static int __init cbaf_driver_init(void)
+{
+	return usb_register(&cbaf_driver);
+}
+module_init(cbaf_driver_init);
+
+static void __exit cbaf_driver_exit(void)
+{
+	usb_deregister(&cbaf_driver);
+}
+module_exit(cbaf_driver_exit);
+
+MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>");
+MODULE_DESCRIPTION("Wireless USB Cable Based Association");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/wusbcore/crypto.c b/drivers/usb/wusbcore/crypto.c
new file mode 100644
index 0000000..c36c438
--- /dev/null
+++ b/drivers/usb/wusbcore/crypto.c
@@ -0,0 +1,538 @@
+/*
+ * Ultra Wide Band
+ * AES-128 CCM Encryption
+ *
+ * Copyright (C) 2007 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * We don't do any encryption here; we use the Linux Kernel's AES-128
+ * crypto modules to construct keys and payload blocks in a way
+ * defined by WUSB1.0[6]. Check the erratas, as typos are are patched
+ * there.
+ *
+ * Thanks a zillion to John Keys for his help and clarifications over
+ * the designed-by-a-committee text.
+ *
+ * So the idea is that there is this basic Pseudo-Random-Function
+ * defined in WUSB1.0[6.5] which is the core of everything. It works
+ * by tweaking some blocks, AES crypting them and then xoring
+ * something else with them (this seems to be called CBC(AES) -- can
+ * you tell I know jack about crypto?). So we just funnel it into the
+ * Linux Crypto API.
+ *
+ * We leave a crypto test module so we can verify that vectors match,
+ * every now and then.
+ *
+ * Block size: 16 bytes -- AES seems to do things in 'block sizes'. I
+ *             am learning a lot...
+ *
+ *             Conveniently, some data structures that need to be
+ *             funneled through AES are...16 bytes in size!
+ */
+
+#include <linux/crypto.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/uwb.h>
+#include <linux/usb/wusb.h>
+#include <linux/scatterlist.h>
+#define D_LOCAL 0
+#include <linux/uwb/debug.h>
+
+
+/*
+ * Block of data, as understood by AES-CCM
+ *
+ * The code assumes this structure is nothing but a 16 byte array
+ * (packed in a struct to avoid common mess ups that I usually do with
+ * arrays and enforcing type checking).
+ */
+struct aes_ccm_block {
+	u8 data[16];
+} __attribute__((packed));
+
+/*
+ * Counter-mode Blocks (WUSB1.0[6.4])
+ *
+ * According to CCM (or so it seems), for the purpose of calculating
+ * the MIC, the message is broken in N counter-mode blocks, B0, B1,
+ * ... BN.
+ *
+ * B0 contains flags, the CCM nonce and l(m).
+ *
+ * B1 contains l(a), the MAC header, the encryption offset and padding.
+ *
+ * If EO is nonzero, additional blocks are built from payload bytes
+ * until EO is exahusted (FIXME: padding to 16 bytes, I guess). The
+ * padding is not xmitted.
+ */
+
+/* WUSB1.0[T6.4] */
+struct aes_ccm_b0 {
+	u8 flags;	/* 0x59, per CCM spec */
+	struct aes_ccm_nonce ccm_nonce;
+	__be16 lm;
+} __attribute__((packed));
+
+/* WUSB1.0[T6.5] */
+struct aes_ccm_b1 {
+	__be16 la;
+	u8 mac_header[10];
+	__le16 eo;
+	u8 security_reserved;	/* This is always zero */
+	u8 padding;		/* 0 */
+} __attribute__((packed));
+
+/*
+ * Encryption Blocks (WUSB1.0[6.4.4])
+ *
+ * CCM uses Ax blocks to generate a keystream with which the MIC and
+ * the message's payload are encoded. A0 always encrypts/decrypts the
+ * MIC. Ax (x>0) are used for the sucesive payload blocks.
+ *
+ * The x is the counter, and is increased for each block.
+ */
+struct aes_ccm_a {
+	u8 flags;	/* 0x01, per CCM spec */
+	struct aes_ccm_nonce ccm_nonce;
+	__be16 counter;	/* Value of x */
+} __attribute__((packed));
+
+static void bytewise_xor(void *_bo, const void *_bi1, const void *_bi2,
+			 size_t size)
+{
+	u8 *bo = _bo;
+	const u8 *bi1 = _bi1, *bi2 = _bi2;
+	size_t itr;
+	for (itr = 0; itr < size; itr++)
+		bo[itr] = bi1[itr] ^ bi2[itr];
+}
+
+/*
+ * CC-MAC function WUSB1.0[6.5]
+ *
+ * Take a data string and produce the encrypted CBC Counter-mode MIC
+ *
+ * Note the names for most function arguments are made to (more or
+ * less) match those used in the pseudo-function definition given in
+ * WUSB1.0[6.5].
+ *
+ * @tfm_cbc: CBC(AES) blkcipher handle (initialized)
+ *
+ * @tfm_aes: AES cipher handle (initialized)
+ *
+ * @mic: buffer for placing the computed MIC (Message Integrity
+ *       Code). This is exactly 8 bytes, and we expect the buffer to
+ *       be at least eight bytes in length.
+ *
+ * @key: 128 bit symmetric key
+ *
+ * @n: CCM nonce
+ *
+ * @a: ASCII string, 14 bytes long (I guess zero padded if needed;
+ *     we use exactly 14 bytes).
+ *
+ * @b: data stream to be processed; cannot be a global or const local
+ *     (will confuse the scatterlists)
+ *
+ * @blen: size of b...
+ *
+ * Still not very clear how this is done, but looks like this: we
+ * create block B0 (as WUSB1.0[6.5] says), then we AES-crypt it with
+ * @key. We bytewise xor B0 with B1 (1) and AES-crypt that. Then we
+ * take the payload and divide it in blocks (16 bytes), xor them with
+ * the previous crypto result (16 bytes) and crypt it, repeat the next
+ * block with the output of the previous one, rinse wash (I guess this
+ * is what AES CBC mode means...but I truly have no idea). So we use
+ * the CBC(AES) blkcipher, that does precisely that. The IV (Initial
+ * Vector) is 16 bytes and is set to zero, so
+ *
+ * See rfc3610. Linux crypto has a CBC implementation, but the
+ * documentation is scarce, to say the least, and the example code is
+ * so intricated that is difficult to understand how things work. Most
+ * of this is guess work -- bite me.
+ *
+ * (1) Created as 6.5 says, again, using as l(a) 'Blen + 14', and
+ *     using the 14 bytes of @a to fill up
+ *     b1.{mac_header,e0,security_reserved,padding}.
+ *
+ * NOTE: The definiton of l(a) in WUSB1.0[6.5] vs the definition of
+ *       l(m) is orthogonal, they bear no relationship, so it is not
+ *       in conflict with the parameter's relation that
+ *       WUSB1.0[6.4.2]) defines.
+ *
+ * NOTE: WUSB1.0[A.1]: Host Nonce is missing a nibble? (1e); fixed in
+ *       first errata released on 2005/07.
+ *
+ * NOTE: we need to clean IV to zero at each invocation to make sure
+ *       we start with a fresh empty Initial Vector, so that the CBC
+ *       works ok.
+ *
+ * NOTE: blen is not aligned to a block size, we'll pad zeros, that's
+ *       what sg[4] is for. Maybe there is a smarter way to do this.
+ */
+static int wusb_ccm_mac(struct crypto_blkcipher *tfm_cbc,
+			struct crypto_cipher *tfm_aes, void *mic,
+			const struct aes_ccm_nonce *n,
+			const struct aes_ccm_label *a, const void *b,
+			size_t blen)
+{
+	int result = 0;
+	struct blkcipher_desc desc;
+	struct aes_ccm_b0 b0;
+	struct aes_ccm_b1 b1;
+	struct aes_ccm_a ax;
+	struct scatterlist sg[4], sg_dst;
+	void *iv, *dst_buf;
+	size_t ivsize, dst_size;
+	const u8 bzero[16] = { 0 };
+	size_t zero_padding;
+
+	d_fnstart(3, NULL, "(tfm_cbc %p, tfm_aes %p, mic %p, "
+		  "n %p, a %p, b %p, blen %zu)\n",
+		  tfm_cbc, tfm_aes, mic, n, a, b, blen);
+	/*
+	 * These checks should be compile time optimized out
+	 * ensure @a fills b1's mac_header and following fields
+	 */
+	WARN_ON(sizeof(*a) != sizeof(b1) - sizeof(b1.la));
+	WARN_ON(sizeof(b0) != sizeof(struct aes_ccm_block));
+	WARN_ON(sizeof(b1) != sizeof(struct aes_ccm_block));
+	WARN_ON(sizeof(ax) != sizeof(struct aes_ccm_block));
+
+	result = -ENOMEM;
+	zero_padding = sizeof(struct aes_ccm_block)
+		- blen % sizeof(struct aes_ccm_block);
+	zero_padding = blen % sizeof(struct aes_ccm_block);
+	if (zero_padding)
+		zero_padding = sizeof(struct aes_ccm_block) - zero_padding;
+	dst_size = blen + sizeof(b0) + sizeof(b1) + zero_padding;
+	dst_buf = kzalloc(dst_size, GFP_KERNEL);
+	if (dst_buf == NULL) {
+		printk(KERN_ERR "E: can't alloc destination buffer\n");
+		goto error_dst_buf;
+	}
+
+	iv = crypto_blkcipher_crt(tfm_cbc)->iv;
+	ivsize = crypto_blkcipher_ivsize(tfm_cbc);
+	memset(iv, 0, ivsize);
+
+	/* Setup B0 */
+	b0.flags = 0x59;	/* Format B0 */
+	b0.ccm_nonce = *n;
+	b0.lm = cpu_to_be16(0);	/* WUSB1.0[6.5] sez l(m) is 0 */
+
+	/* Setup B1
+	 *
+	 * The WUSB spec is anything but clear! WUSB1.0[6.5]
+	 * says that to initialize B1 from A with 'l(a) = blen +
+	 * 14'--after clarification, it means to use A's contents
+	 * for MAC Header, EO, sec reserved and padding.
+	 */
+	b1.la = cpu_to_be16(blen + 14);
+	memcpy(&b1.mac_header, a, sizeof(*a));
+
+	d_printf(4, NULL, "I: B0 (%zu bytes)\n", sizeof(b0));
+	d_dump(4, NULL, &b0, sizeof(b0));
+	d_printf(4, NULL, "I: B1 (%zu bytes)\n", sizeof(b1));
+	d_dump(4, NULL, &b1, sizeof(b1));
+	d_printf(4, NULL, "I: B (%zu bytes)\n", blen);
+	d_dump(4, NULL, b, blen);
+	d_printf(4, NULL, "I: B 0-padding (%zu bytes)\n", zero_padding);
+	d_printf(4, NULL, "D: IV before crypto (%zu)\n", ivsize);
+	d_dump(4, NULL, iv, ivsize);
+
+	sg_init_table(sg, ARRAY_SIZE(sg));
+	sg_set_buf(&sg[0], &b0, sizeof(b0));
+	sg_set_buf(&sg[1], &b1, sizeof(b1));
+	sg_set_buf(&sg[2], b, blen);
+	/* 0 if well behaved :) */
+	sg_set_buf(&sg[3], bzero, zero_padding);
+	sg_init_one(&sg_dst, dst_buf, dst_size);
+
+	desc.tfm = tfm_cbc;
+	desc.flags = 0;
+	result = crypto_blkcipher_encrypt(&desc, &sg_dst, sg, dst_size);
+	if (result < 0) {
+		printk(KERN_ERR "E: can't compute CBC-MAC tag (MIC): %d\n",
+		       result);
+		goto error_cbc_crypt;
+	}
+	d_printf(4, NULL, "D: MIC tag\n");
+	d_dump(4, NULL, iv, ivsize);
+
+	/* Now we crypt the MIC Tag (*iv) with Ax -- values per WUSB1.0[6.5]
+	 * The procedure is to AES crypt the A0 block and XOR the MIC
+	 * Tag agains it; we only do the first 8 bytes and place it
+	 * directly in the destination buffer.
+	 *
+	 * POS Crypto API: size is assumed to be AES's block size.
+	 * Thanks for documenting it -- tip taken from airo.c
+	 */
+	ax.flags = 0x01;		/* as per WUSB 1.0 spec */
+	ax.ccm_nonce = *n;
+	ax.counter = 0;
+	crypto_cipher_encrypt_one(tfm_aes, (void *)&ax, (void *)&ax);
+	bytewise_xor(mic, &ax, iv, 8);
+	d_printf(4, NULL, "D: CTR[MIC]\n");
+	d_dump(4, NULL, &ax, 8);
+	d_printf(4, NULL, "D: CCM-MIC tag\n");
+	d_dump(4, NULL, mic, 8);
+	result = 8;
+error_cbc_crypt:
+	kfree(dst_buf);
+error_dst_buf:
+	d_fnend(3, NULL, "(tfm_cbc %p, tfm_aes %p, mic %p, "
+		"n %p, a %p, b %p, blen %zu)\n",
+		tfm_cbc, tfm_aes, mic, n, a, b, blen);
+	return result;
+}
+
+/*
+ * WUSB Pseudo Random Function (WUSB1.0[6.5])
+ *
+ * @b: buffer to the source data; cannot be a global or const local
+ *     (will confuse the scatterlists)
+ */
+ssize_t wusb_prf(void *out, size_t out_size,
+		 const u8 key[16], const struct aes_ccm_nonce *_n,
+		 const struct aes_ccm_label *a,
+		 const void *b, size_t blen, size_t len)
+{
+	ssize_t result, bytes = 0, bitr;
+	struct aes_ccm_nonce n = *_n;
+	struct crypto_blkcipher *tfm_cbc;
+	struct crypto_cipher *tfm_aes;
+	u64 sfn = 0;
+	__le64 sfn_le;
+
+	d_fnstart(3, NULL, "(out %p, out_size %zu, key %p, _n %p, "
+		  "a %p, b %p, blen %zu, len %zu)\n", out, out_size,
+		  key, _n, a, b, blen, len);
+
+	tfm_cbc = crypto_alloc_blkcipher("cbc(aes)", 0, CRYPTO_ALG_ASYNC);
+	if (IS_ERR(tfm_cbc)) {
+		result = PTR_ERR(tfm_cbc);
+		printk(KERN_ERR "E: can't load CBC(AES): %d\n", (int)result);
+		goto error_alloc_cbc;
+	}
+	result = crypto_blkcipher_setkey(tfm_cbc, key, 16);
+	if (result < 0) {
+		printk(KERN_ERR "E: can't set CBC key: %d\n", (int)result);
+		goto error_setkey_cbc;
+	}
+
+	tfm_aes = crypto_alloc_cipher("aes", 0, CRYPTO_ALG_ASYNC);
+	if (IS_ERR(tfm_aes)) {
+		result = PTR_ERR(tfm_aes);
+		printk(KERN_ERR "E: can't load AES: %d\n", (int)result);
+		goto error_alloc_aes;
+	}
+	result = crypto_cipher_setkey(tfm_aes, key, 16);
+	if (result < 0) {
+		printk(KERN_ERR "E: can't set AES key: %d\n", (int)result);
+		goto error_setkey_aes;
+	}
+
+	for (bitr = 0; bitr < (len + 63) / 64; bitr++) {
+		sfn_le = cpu_to_le64(sfn++);
+		memcpy(&n.sfn, &sfn_le, sizeof(n.sfn));	/* n.sfn++... */
+		result = wusb_ccm_mac(tfm_cbc, tfm_aes, out + bytes,
+				      &n, a, b, blen);
+		if (result < 0)
+			goto error_ccm_mac;
+		bytes += result;
+	}
+	result = bytes;
+error_ccm_mac:
+error_setkey_aes:
+	crypto_free_cipher(tfm_aes);
+error_alloc_aes:
+error_setkey_cbc:
+	crypto_free_blkcipher(tfm_cbc);
+error_alloc_cbc:
+	d_fnend(3, NULL, "(out %p, out_size %zu, key %p, _n %p, "
+		"a %p, b %p, blen %zu, len %zu) = %d\n", out, out_size,
+		key, _n, a, b, blen, len, (int)bytes);
+	return result;
+}
+
+/* WUSB1.0[A.2] test vectors */
+static const u8 stv_hsmic_key[16] = {
+	0x4b, 0x79, 0xa3, 0xcf, 0xe5, 0x53, 0x23, 0x9d,
+	0xd7, 0xc1, 0x6d, 0x1c, 0x2d, 0xab, 0x6d, 0x3f
+};
+
+static const struct aes_ccm_nonce stv_hsmic_n = {
+	.sfn = { 0 },
+	.tkid = { 0x76, 0x98, 0x01,  },
+	.dest_addr = { .data = { 0xbe, 0x00 } },
+		.src_addr = { .data = { 0x76, 0x98 } },
+};
+
+/*
+ * Out-of-band MIC Generation verification code
+ *
+ */
+static int wusb_oob_mic_verify(void)
+{
+	int result;
+	u8 mic[8];
+	/* WUSB1.0[A.2] test vectors
+	 *
+	 * Need to keep it in the local stack as GCC 4.1.3something
+	 * messes up and generates noise.
+	 */
+	struct usb_handshake stv_hsmic_hs = {
+		.bMessageNumber = 2,
+		.bStatus 	= 00,
+		.tTKID 		= { 0x76, 0x98, 0x01 },
+		.bReserved 	= 00,
+		.CDID 		= { 0x30, 0x31, 0x32, 0x33, 0x34, 0x35,
+				    0x36, 0x37, 0x38, 0x39, 0x3a, 0x3b,
+				    0x3c, 0x3d, 0x3e, 0x3f },
+		.nonce	 	= { 0x20, 0x21, 0x22, 0x23, 0x24, 0x25,
+				    0x26, 0x27, 0x28, 0x29, 0x2a, 0x2b,
+				    0x2c, 0x2d, 0x2e, 0x2f },
+		.MIC	 	= { 0x75, 0x6a, 0x97, 0x51, 0x0c, 0x8c,
+				    0x14, 0x7b } ,
+	};
+	size_t hs_size;
+
+	result = wusb_oob_mic(mic, stv_hsmic_key, &stv_hsmic_n, &stv_hsmic_hs);
+	if (result < 0)
+		printk(KERN_ERR "E: WUSB OOB MIC test: failed: %d\n", result);
+	else if (memcmp(stv_hsmic_hs.MIC, mic, sizeof(mic))) {
+		printk(KERN_ERR "E: OOB MIC test: "
+		       "mismatch between MIC result and WUSB1.0[A2]\n");
+		hs_size = sizeof(stv_hsmic_hs) - sizeof(stv_hsmic_hs.MIC);
+		printk(KERN_ERR "E: Handshake2 in: (%zu bytes)\n", hs_size);
+		dump_bytes(NULL, &stv_hsmic_hs, hs_size);
+		printk(KERN_ERR "E: CCM Nonce in: (%zu bytes)\n",
+		       sizeof(stv_hsmic_n));
+		dump_bytes(NULL, &stv_hsmic_n, sizeof(stv_hsmic_n));
+		printk(KERN_ERR "E: MIC out:\n");
+		dump_bytes(NULL, mic, sizeof(mic));
+		printk(KERN_ERR "E: MIC out (from WUSB1.0[A.2]):\n");
+		dump_bytes(NULL, stv_hsmic_hs.MIC, sizeof(stv_hsmic_hs.MIC));
+		result = -EINVAL;
+	} else
+		result = 0;
+	return result;
+}
+
+/*
+ * Test vectors for Key derivation
+ *
+ * These come from WUSB1.0[6.5.1], the vectors in WUSB1.0[A.1]
+ * (errata corrected in 2005/07).
+ */
+static const u8 stv_key_a1[16] __attribute__ ((__aligned__(4))) = {
+	0xf0, 0xe1, 0xd2, 0xc3, 0xb4, 0xa5, 0x96, 0x87,
+	0x78, 0x69, 0x5a, 0x4b, 0x3c, 0x2d, 0x1e, 0x0f
+};
+
+static const struct aes_ccm_nonce stv_keydvt_n_a1 = {
+	.sfn = { 0 },
+	.tkid = { 0x76, 0x98, 0x01,  },
+	.dest_addr = { .data = { 0xbe, 0x00 } },
+	.src_addr = { .data = { 0x76, 0x98 } },
+};
+
+static const struct wusb_keydvt_out stv_keydvt_out_a1 = {
+	.kck = {
+		0x4b, 0x79, 0xa3, 0xcf, 0xe5, 0x53, 0x23, 0x9d,
+		0xd7, 0xc1, 0x6d, 0x1c, 0x2d, 0xab, 0x6d, 0x3f
+	},
+	.ptk = {
+		0xc8, 0x70, 0x62, 0x82, 0xb6, 0x7c, 0xe9, 0x06,
+		0x7b, 0xc5, 0x25, 0x69, 0xf2, 0x36, 0x61, 0x2d
+	}
+};
+
+/*
+ * Performa a test to make sure we match the vectors defined in
+ * WUSB1.0[A.1](Errata2006/12)
+ */
+static int wusb_key_derive_verify(void)
+{
+	int result = 0;
+	struct wusb_keydvt_out keydvt_out;
+	/* These come from WUSB1.0[A.1] + 2006/12 errata
+	 * NOTE: can't make this const or global -- somehow it seems
+	 *       the scatterlists for crypto get confused and we get
+	 *       bad data. There is no doc on this... */
+	struct wusb_keydvt_in stv_keydvt_in_a1 = {
+		.hnonce = {
+			0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
+			0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f
+		},
+		.dnonce = {
+			0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27,
+			0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f
+		}
+	};
+
+	result = wusb_key_derive(&keydvt_out, stv_key_a1, &stv_keydvt_n_a1,
+				 &stv_keydvt_in_a1);
+	if (result < 0)
+		printk(KERN_ERR "E: WUSB key derivation test: "
+		       "derivation failed: %d\n", result);
+	if (memcmp(&stv_keydvt_out_a1, &keydvt_out, sizeof(keydvt_out))) {
+		printk(KERN_ERR "E: WUSB key derivation test: "
+		       "mismatch between key derivation result "
+		       "and WUSB1.0[A1] Errata 2006/12\n");
+		printk(KERN_ERR "E: keydvt in: key (%zu bytes)\n",
+		       sizeof(stv_key_a1));
+		dump_bytes(NULL, stv_key_a1, sizeof(stv_key_a1));
+		printk(KERN_ERR "E: keydvt in: nonce (%zu bytes)\n",
+		       sizeof(stv_keydvt_n_a1));
+		dump_bytes(NULL, &stv_keydvt_n_a1, sizeof(stv_keydvt_n_a1));
+		printk(KERN_ERR "E: keydvt in: hnonce & dnonce (%zu bytes)\n",
+		       sizeof(stv_keydvt_in_a1));
+		dump_bytes(NULL, &stv_keydvt_in_a1, sizeof(stv_keydvt_in_a1));
+		printk(KERN_ERR "E: keydvt out: KCK\n");
+		dump_bytes(NULL, &keydvt_out.kck, sizeof(keydvt_out.kck));
+		printk(KERN_ERR "E: keydvt out: PTK\n");
+		dump_bytes(NULL, &keydvt_out.ptk, sizeof(keydvt_out.ptk));
+		result = -EINVAL;
+	} else
+		result = 0;
+	return result;
+}
+
+/*
+ * Initialize crypto system
+ *
+ * FIXME: we do nothing now, other than verifying. Later on we'll
+ * cache the encryption stuff, so that's why we have a separate init.
+ */
+int wusb_crypto_init(void)
+{
+	int result;
+
+	result = wusb_key_derive_verify();
+	if (result < 0)
+		return result;
+	return wusb_oob_mic_verify();
+}
+
+void wusb_crypto_exit(void)
+{
+	/* FIXME: free cached crypto transforms */
+}
diff --git a/drivers/usb/wusbcore/dev-sysfs.c b/drivers/usb/wusbcore/dev-sysfs.c
new file mode 100644
index 0000000..7897a19
--- /dev/null
+++ b/drivers/usb/wusbcore/dev-sysfs.c
@@ -0,0 +1,143 @@
+/*
+ * WUSB devices
+ * sysfs bindings
+ *
+ * Copyright (C) 2007 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * Get them out of the way...
+ */
+
+#include <linux/jiffies.h>
+#include <linux/ctype.h>
+#include <linux/workqueue.h>
+#include "wusbhc.h"
+
+#undef D_LOCAL
+#define D_LOCAL 4
+#include <linux/uwb/debug.h>
+
+static ssize_t wusb_disconnect_store(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t size)
+{
+	struct usb_device *usb_dev;
+	struct wusbhc *wusbhc;
+	unsigned command;
+	u8 port_idx;
+
+	if (sscanf(buf, "%u", &command) != 1)
+		return -EINVAL;
+	if (command == 0)
+		return size;
+	usb_dev = to_usb_device(dev);
+	wusbhc = wusbhc_get_by_usb_dev(usb_dev);
+	if (wusbhc == NULL)
+		return -ENODEV;
+
+	mutex_lock(&wusbhc->mutex);
+	port_idx = wusb_port_no_to_idx(usb_dev->portnum);
+	__wusbhc_dev_disable(wusbhc, port_idx);
+	mutex_unlock(&wusbhc->mutex);
+	wusbhc_put(wusbhc);
+	return size;
+}
+static DEVICE_ATTR(wusb_disconnect, 0200, NULL, wusb_disconnect_store);
+
+static ssize_t wusb_cdid_show(struct device *dev,
+			      struct device_attribute *attr, char *buf)
+{
+	ssize_t result;
+	struct wusb_dev *wusb_dev;
+
+	wusb_dev = wusb_dev_get_by_usb_dev(to_usb_device(dev));
+	if (wusb_dev == NULL)
+		return -ENODEV;
+	result = ckhdid_printf(buf, PAGE_SIZE, &wusb_dev->cdid);
+	strcat(buf, "\n");
+	wusb_dev_put(wusb_dev);
+	return result + 1;
+}
+static DEVICE_ATTR(wusb_cdid, 0444, wusb_cdid_show, NULL);
+
+static ssize_t wusb_ck_store(struct device *dev,
+			     struct device_attribute *attr,
+			     const char *buf, size_t size)
+{
+	int result;
+	struct usb_device *usb_dev;
+	struct wusbhc *wusbhc;
+	struct wusb_ckhdid ck;
+
+	result = sscanf(buf,
+			"%02hhx %02hhx %02hhx %02hhx "
+			"%02hhx %02hhx %02hhx %02hhx "
+			"%02hhx %02hhx %02hhx %02hhx "
+			"%02hhx %02hhx %02hhx %02hhx\n",
+			&ck.data[0] , &ck.data[1],
+			&ck.data[2] , &ck.data[3],
+			&ck.data[4] , &ck.data[5],
+			&ck.data[6] , &ck.data[7],
+			&ck.data[8] , &ck.data[9],
+			&ck.data[10], &ck.data[11],
+			&ck.data[12], &ck.data[13],
+			&ck.data[14], &ck.data[15]);
+	if (result != 16)
+		return -EINVAL;
+
+	usb_dev = to_usb_device(dev);
+	wusbhc = wusbhc_get_by_usb_dev(usb_dev);
+	if (wusbhc == NULL)
+		return -ENODEV;
+	result = wusb_dev_4way_handshake(wusbhc, usb_dev->wusb_dev, &ck);
+	memset(&ck, 0, sizeof(ck));
+	wusbhc_put(wusbhc);
+	return result < 0 ? result : size;
+}
+static DEVICE_ATTR(wusb_ck, 0200, NULL, wusb_ck_store);
+
+static struct attribute *wusb_dev_attrs[] = {
+		&dev_attr_wusb_disconnect.attr,
+		&dev_attr_wusb_cdid.attr,
+		&dev_attr_wusb_ck.attr,
+		NULL,
+};
+
+static struct attribute_group wusb_dev_attr_group = {
+	.name = NULL,	/* we want them in the same directory */
+	.attrs = wusb_dev_attrs,
+};
+
+int wusb_dev_sysfs_add(struct wusbhc *wusbhc, struct usb_device *usb_dev,
+		       struct wusb_dev *wusb_dev)
+{
+	int result = sysfs_create_group(&usb_dev->dev.kobj,
+					&wusb_dev_attr_group);
+	struct device *dev = &usb_dev->dev;
+	if (result < 0)
+		dev_err(dev, "Cannot register WUSB-dev attributes: %d\n",
+			result);
+	return result;
+}
+
+void wusb_dev_sysfs_rm(struct wusb_dev *wusb_dev)
+{
+	struct usb_device *usb_dev = wusb_dev->usb_dev;
+	if (usb_dev)
+		sysfs_remove_group(&usb_dev->dev.kobj, &wusb_dev_attr_group);
+}
diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c
new file mode 100644
index 0000000..f45d777
--- /dev/null
+++ b/drivers/usb/wusbcore/devconnect.c
@@ -0,0 +1,1297 @@
+/*
+ * WUSB Wire Adapter: Control/Data Streaming Interface (WUSB[8])
+ * Device Connect handling
+ *
+ * Copyright (C) 2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ * FIXME: this file needs to be broken up, it's grown too big
+ *
+ *
+ * WUSB1.0[7.1, 7.5.1, ]
+ *
+ * WUSB device connection is kind of messy. Some background:
+ *
+ *     When a device wants to connect it scans the UWB radio channels
+ *     looking for a WUSB Channel; a WUSB channel is defined by MMCs
+ *     (Micro Managed Commands or something like that) [see
+ *     Design-overview for more on this] .
+ *
+ * So, device scans the radio, finds MMCs and thus a host and checks
+ * when the next DNTS is. It sends a Device Notification Connect
+ * (DN_Connect); the host picks it up (through nep.c and notif.c, ends
+ * up in wusb_devconnect_ack(), which creates a wusb_dev structure in
+ * wusbhc->port[port_number].wusb_dev), assigns an unauth address
+ * to the device (this means from 0x80 to 0xfe) and sends, in the MMC
+ * a Connect Ack Information Element (ConnAck IE).
+ *
+ * So now the device now has a WUSB address. From now on, we use
+ * that to talk to it in the RPipes.
+ *
+ * ASSUMPTIONS:
+ *
+ *  - We use the the as device address the port number where it is
+ *    connected (port 0 doesn't exist). For unauth, it is 128 + that.
+ *
+ * ROADMAP:
+ *
+ *   This file contains the logic for doing that--entry points:
+ *
+ *   wusb_devconnect_ack()      Ack a device until _acked() called.
+ *                              Called by notif.c:wusb_handle_dn_connect()
+ *                              when a DN_Connect is received.
+ *
+ *   wusbhc_devconnect_auth()   Called by rh.c:wusbhc_rh_port_reset() when
+ *                              doing the device connect sequence.
+ *
+ *     wusb_devconnect_acked()  Ack done, release resources.
+ *
+ *   wusb_handle_dn_alive()     Called by notif.c:wusb_handle_dn()
+ *                              for processing a DN_Alive pong from a device.
+ *
+ *   wusb_handle_dn_disconnect()Called by notif.c:wusb_handle_dn() to
+ *                              process a disconenct request from a
+ *                              device.
+ *
+ *   wusb_dev_reset()           Called by rh.c:wusbhc_rh_port_reset() when
+ *                              resetting a device.
+ *
+ *   __wusb_dev_disable()       Called by rh.c:wusbhc_rh_clear_port_feat() when
+ *                              disabling a port.
+ *
+ *   wusb_devconnect_create()   Called when creating the host by
+ *                              lc.c:wusbhc_create().
+ *
+ *   wusb_devconnect_destroy()  Cleanup called removing the host. Called
+ *                              by lc.c:wusbhc_destroy().
+ *
+ *   Each Wireless USB host maintains a list of DN_Connect requests
+ *   (actually we maintain a list of pending Connect Acks, the
+ *   wusbhc->ca_list).
+ *
+ * LIFE CYCLE OF port->wusb_dev
+ *
+ *   Before the @wusbhc structure put()s the reference it owns for
+ *   port->wusb_dev [and clean the wusb_dev pointer], it needs to
+ *   lock @wusbhc->mutex.
+ */
+
+#include <linux/jiffies.h>
+#include <linux/ctype.h>
+#include <linux/workqueue.h>
+#include "wusbhc.h"
+
+#undef D_LOCAL
+#define D_LOCAL 1
+#include <linux/uwb/debug.h>
+
+static void wusbhc_devconnect_acked_work(struct work_struct *work);
+
+static void wusb_dev_free(struct wusb_dev *wusb_dev)
+{
+	if (wusb_dev) {
+		kfree(wusb_dev->set_gtk_req);
+		usb_free_urb(wusb_dev->set_gtk_urb);
+		kfree(wusb_dev);
+	}
+}
+
+static struct wusb_dev *wusb_dev_alloc(struct wusbhc *wusbhc)
+{
+	struct wusb_dev *wusb_dev;
+	struct urb *urb;
+	struct usb_ctrlrequest *req;
+
+	wusb_dev = kzalloc(sizeof(*wusb_dev), GFP_KERNEL);
+	if (wusb_dev == NULL)
+		goto err;
+
+	wusb_dev->wusbhc = wusbhc;
+
+	INIT_WORK(&wusb_dev->devconnect_acked_work, wusbhc_devconnect_acked_work);
+
+	urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (urb == NULL)
+		goto err;
+
+	req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
+	if (req == NULL)
+		goto err;
+
+	req->bRequestType = USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE;
+	req->bRequest = USB_REQ_SET_DESCRIPTOR;
+	req->wValue = cpu_to_le16(USB_DT_KEY << 8 | wusbhc->gtk_index);
+	req->wIndex = 0;
+	req->wLength = cpu_to_le16(wusbhc->gtk.descr.bLength);
+
+	wusb_dev->set_gtk_urb = urb;
+	wusb_dev->set_gtk_req = req;
+
+	return wusb_dev;
+err:
+	wusb_dev_free(wusb_dev);
+	return NULL;
+}
+
+
+/*
+ * Using the Connect-Ack list, fill out the @wusbhc Connect-Ack WUSB IE
+ * properly so that it can be added to the MMC.
+ *
+ * We just get the @wusbhc->ca_list and fill out the first four ones or
+ * less (per-spec WUSB1.0[7.5, before T7-38). If the ConnectAck WUSB
+ * IE is not allocated, we alloc it.
+ *
+ * @wusbhc->mutex must be taken
+ */
+static void wusbhc_fill_cack_ie(struct wusbhc *wusbhc)
+{
+	unsigned cnt;
+	struct wusb_dev *dev_itr;
+	struct wuie_connect_ack *cack_ie;
+
+	cack_ie = &wusbhc->cack_ie;
+	cnt = 0;
+	list_for_each_entry(dev_itr, &wusbhc->cack_list, cack_node) {
+		cack_ie->blk[cnt].CDID = dev_itr->cdid;
+		cack_ie->blk[cnt].bDeviceAddress = dev_itr->addr;
+		if (++cnt >= WUIE_ELT_MAX)
+			break;
+	}
+	cack_ie->hdr.bLength = sizeof(cack_ie->hdr)
+		+ cnt * sizeof(cack_ie->blk[0]);
+}
+
+/*
+ * Register a new device that wants to connect
+ *
+ * A new device wants to connect, so we add it to the Connect-Ack
+ * list. We give it an address in the unauthorized range (bit 8 set);
+ * user space will have to drive authorization further on.
+ *
+ * @dev_addr: address to use for the device (which is also the port
+ *            number).
+ *
+ * @wusbhc->mutex must be taken
+ */
+static struct wusb_dev *wusbhc_cack_add(struct wusbhc *wusbhc,
+					struct wusb_dn_connect *dnc,
+					const char *pr_cdid, u8 port_idx)
+{
+	struct device *dev = wusbhc->dev;
+	struct wusb_dev *wusb_dev;
+	int new_connection = wusb_dn_connect_new_connection(dnc);
+	u8 dev_addr;
+	int result;
+
+	/* Is it registered already? */
+	list_for_each_entry(wusb_dev, &wusbhc->cack_list, cack_node)
+		if (!memcmp(&wusb_dev->cdid, &dnc->CDID,
+			    sizeof(wusb_dev->cdid)))
+			return wusb_dev;
+	/* We don't have it, create an entry, register it */
+	wusb_dev = wusb_dev_alloc(wusbhc);
+	if (wusb_dev == NULL)
+		return NULL;
+	wusb_dev_init(wusb_dev);
+	wusb_dev->cdid = dnc->CDID;
+	wusb_dev->port_idx = port_idx;
+
+	/*
+	 * Devices are always available within the cluster reservation
+	 * and since the hardware will take the intersection of the
+	 * per-device availability and the cluster reservation, the
+	 * per-device availability can simply be set to always
+	 * available.
+	 */
+	bitmap_fill(wusb_dev->availability.bm, UWB_NUM_MAS);
+
+	/* FIXME: handle reconnects instead of assuming connects are
+	   always new. */
+	if (1 && new_connection == 0)
+		new_connection = 1;
+	if (new_connection) {
+		dev_addr = (port_idx + 2) | WUSB_DEV_ADDR_UNAUTH;
+
+		dev_info(dev, "Connecting new WUSB device to address %u, "
+			"port %u\n", dev_addr, port_idx);
+
+		result = wusb_set_dev_addr(wusbhc, wusb_dev, dev_addr);
+		if (result < 0)
+			return NULL;
+	}
+	wusb_dev->entry_ts = jiffies;
+	list_add_tail(&wusb_dev->cack_node, &wusbhc->cack_list);
+	wusbhc->cack_count++;
+	wusbhc_fill_cack_ie(wusbhc);
+	return wusb_dev;
+}
+
+/*
+ * Remove a Connect-Ack context entry from the HCs view
+ *
+ * @wusbhc->mutex must be taken
+ */
+static void wusbhc_cack_rm(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev)
+{
+	struct device *dev = wusbhc->dev;
+	d_fnstart(3, dev, "(wusbhc %p wusb_dev %p)\n", wusbhc, wusb_dev);
+	list_del_init(&wusb_dev->cack_node);
+	wusbhc->cack_count--;
+	wusbhc_fill_cack_ie(wusbhc);
+	d_fnend(3, dev, "(wusbhc %p wusb_dev %p) = void\n", wusbhc, wusb_dev);
+}
+
+/*
+ * @wusbhc->mutex must be taken */
+static
+void wusbhc_devconnect_acked(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev)
+{
+	struct device *dev = wusbhc->dev;
+	d_fnstart(3, dev, "(wusbhc %p wusb_dev %p)\n", wusbhc, wusb_dev);
+	wusbhc_cack_rm(wusbhc, wusb_dev);
+	if (wusbhc->cack_count)
+		wusbhc_mmcie_set(wusbhc, 0, 0, &wusbhc->cack_ie.hdr);
+	else
+		wusbhc_mmcie_rm(wusbhc, &wusbhc->cack_ie.hdr);
+	d_fnend(3, dev, "(wusbhc %p wusb_dev %p) = void\n", wusbhc, wusb_dev);
+}
+
+static void wusbhc_devconnect_acked_work(struct work_struct *work)
+{
+	struct wusb_dev *wusb_dev = container_of(work, struct wusb_dev,
+						 devconnect_acked_work);
+	struct wusbhc *wusbhc = wusb_dev->wusbhc;
+
+	mutex_lock(&wusbhc->mutex);
+	wusbhc_devconnect_acked(wusbhc, wusb_dev);
+	mutex_unlock(&wusbhc->mutex);
+}
+
+/*
+ * Ack a device for connection
+ *
+ * FIXME: docs
+ *
+ * @pr_cdid:	Printable CDID...hex Use @dnc->cdid for the real deal.
+ *
+ * So we get the connect ack IE (may have been allocated already),
+ * find an empty connect block, an empty virtual port, create an
+ * address with it (see below), make it an unauth addr [bit 7 set] and
+ * set the MMC.
+ *
+ * Addresses: because WUSB hosts have no downstream hubs, we can do a
+ *            1:1 mapping between 'port number' and device
+ *            address. This simplifies many things, as during this
+ *            initial connect phase the USB stack has no knoledge of
+ *            the device and hasn't assigned an address yet--we know
+ *            USB's choose_address() will use the same euristics we
+ *            use here, so we can assume which address will be assigned.
+ *
+ *            USB stack always assigns address 1 to the root hub, so
+ *            to the port number we add 2 (thus virtual port #0 is
+ *            addr #2).
+ *
+ * @wusbhc shall be referenced
+ */
+static
+void wusbhc_devconnect_ack(struct wusbhc *wusbhc, struct wusb_dn_connect *dnc,
+			   const char *pr_cdid)
+{
+	int result;
+	struct device *dev = wusbhc->dev;
+	struct wusb_dev *wusb_dev;
+	struct wusb_port *port;
+	unsigned idx, devnum;
+
+	d_fnstart(3, dev, "(%p, %p, %s)\n", wusbhc, dnc, pr_cdid);
+	mutex_lock(&wusbhc->mutex);
+
+	/* Check we are not handling it already */
+	for (idx = 0; idx < wusbhc->ports_max; idx++) {
+		port = wusb_port_by_idx(wusbhc, idx);
+		if (port->wusb_dev
+		    && memcmp(&dnc->CDID, &port->wusb_dev->cdid, sizeof(dnc->CDID)) == 0)
+			goto error_unlock;
+	}
+	/* Look up those fake ports we have for a free one */
+	for (idx = 0; idx < wusbhc->ports_max; idx++) {
+		port = wusb_port_by_idx(wusbhc, idx);
+		if ((port->status & USB_PORT_STAT_POWER)
+		    && !(port->status & USB_PORT_STAT_CONNECTION))
+			break;
+	}
+	if (idx >= wusbhc->ports_max) {
+		dev_err(dev, "Host controller can't connect more devices "
+			"(%u already connected); device %s rejected\n",
+			wusbhc->ports_max, pr_cdid);
+		/* NOTE: we could send a WUIE_Disconnect here, but we haven't
+		 *       event acked, so the device will eventually timeout the
+		 *       connection, right? */
+		goto error_unlock;
+	}
+
+	devnum = idx + 2;
+
+	/* Make sure we are using no crypto on that "virtual port" */
+	wusbhc->set_ptk(wusbhc, idx, 0, NULL, 0);
+
+	/* Grab a filled in Connect-Ack context, fill out the
+	 * Connect-Ack Wireless USB IE, set the MMC */
+	wusb_dev = wusbhc_cack_add(wusbhc, dnc, pr_cdid, idx);
+	if (wusb_dev == NULL)
+		goto error_unlock;
+	result = wusbhc_mmcie_set(wusbhc, 0, 0, &wusbhc->cack_ie.hdr);
+	if (result < 0)
+		goto error_unlock;
+	/* Give the device at least 2ms (WUSB1.0[7.5.1p3]), let's do
+	 * three for a good measure */
+	msleep(3);
+	port->wusb_dev = wusb_dev;
+	port->status |= USB_PORT_STAT_CONNECTION;
+	port->change |= USB_PORT_STAT_C_CONNECTION;
+	port->reset_count = 0;
+	/* Now the port status changed to connected; khubd will
+	 * pick the change up and try to reset the port to bring it to
+	 * the enabled state--so this process returns up to the stack
+	 * and it calls back into wusbhc_rh_port_reset() who will call
+	 * devconnect_auth().
+	 */
+error_unlock:
+	mutex_unlock(&wusbhc->mutex);
+	d_fnend(3, dev, "(%p, %p, %s) = void\n", wusbhc, dnc, pr_cdid);
+	return;
+
+}
+
+/*
+ * Disconnect a Wireless USB device from its fake port
+ *
+ * Marks the port as disconnected so that khubd can pick up the change
+ * and drops our knowledge about the device.
+ *
+ * Assumes there is a device connected
+ *
+ * @port_index: zero based port number
+ *
+ * NOTE: @wusbhc->mutex is locked
+ *
+ * WARNING: From here it is not very safe to access anything hanging off
+ *	    wusb_dev
+ */
+static void __wusbhc_dev_disconnect(struct wusbhc *wusbhc,
+				    struct wusb_port *port)
+{
+	struct device *dev = wusbhc->dev;
+	struct wusb_dev *wusb_dev = port->wusb_dev;
+
+	d_fnstart(3, dev, "(wusbhc %p, port %p)\n", wusbhc, port);
+	port->status &= ~(USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE
+			  | USB_PORT_STAT_SUSPEND | USB_PORT_STAT_RESET
+			  | USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED);
+	port->change |= USB_PORT_STAT_C_CONNECTION | USB_PORT_STAT_C_ENABLE;
+	if (wusb_dev) {
+		if (!list_empty(&wusb_dev->cack_node))
+			list_del_init(&wusb_dev->cack_node);
+		/* For the one in cack_add() */
+		wusb_dev_put(wusb_dev);
+	}
+	port->wusb_dev = NULL;
+	/* don't reset the reset_count to zero or wusbhc_rh_port_reset will get
+	 * confused! We only reset to zero when we connect a new device.
+	 */
+
+	/* After a device disconnects, change the GTK (see [WUSB]
+	 * section 6.2.11.2). */
+	wusbhc_gtk_rekey(wusbhc);
+
+	d_fnend(3, dev, "(wusbhc %p, port %p) = void\n", wusbhc, port);
+	/* The Wireless USB part has forgotten about the device already; now
+	 * khubd's timer will pick up the disconnection and remove the USB
+	 * device from the system
+	 */
+}
+
+/*
+ * Authenticate a device into the WUSB Cluster
+ *
+ * Called from the Root Hub code (rh.c:wusbhc_rh_port_reset()) when
+ * asking for a reset on a port that is not enabled (ie: first connect
+ * on the port).
+ *
+ * Performs the 4way handshake to allow the device to comunicate w/ the
+ * WUSB Cluster securely; once done, issue a request to the device for
+ * it to change to address 0.
+ *
+ * This mimics the reset step of Wired USB that once resetting a
+ * device, leaves the port in enabled state and the dev with the
+ * default address (0).
+ *
+ * WUSB1.0[7.1.2]
+ *
+ * @port_idx: port where the change happened--This is the index into
+ *            the wusbhc port array, not the USB port number.
+ */
+int wusbhc_devconnect_auth(struct wusbhc *wusbhc, u8 port_idx)
+{
+	struct device *dev = wusbhc->dev;
+	struct wusb_port *port = wusb_port_by_idx(wusbhc, port_idx);
+
+	d_fnstart(3, dev, "(%p, %u)\n", wusbhc, port_idx);
+	port->status &= ~USB_PORT_STAT_RESET;
+	port->status |= USB_PORT_STAT_ENABLE;
+	port->change |= USB_PORT_STAT_C_RESET | USB_PORT_STAT_C_ENABLE;
+	d_fnend(3, dev, "(%p, %u) = 0\n", wusbhc, port_idx);
+	return 0;
+}
+
+/*
+ * Refresh the list of keep alives to emit in the MMC
+ *
+ * Some devices don't respond to keep alives unless they've been
+ * authenticated, so skip unauthenticated devices.
+ *
+ * We only publish the first four devices that have a coming timeout
+ * condition. Then when we are done processing those, we go for the
+ * next ones. We ignore the ones that have timed out already (they'll
+ * be purged).
+ *
+ * This might cause the first devices to timeout the last devices in
+ * the port array...FIXME: come up with a better algorithm?
+ *
+ * Note we can't do much about MMC's ops errors; we hope next refresh
+ * will kind of handle it.
+ *
+ * NOTE: @wusbhc->mutex is locked
+ */
+static void __wusbhc_keep_alive(struct wusbhc *wusbhc)
+{
+	struct device *dev = wusbhc->dev;
+	unsigned cnt;
+	struct wusb_dev *wusb_dev;
+	struct wusb_port *wusb_port;
+	struct wuie_keep_alive *ie = &wusbhc->keep_alive_ie;
+	unsigned keep_alives, old_keep_alives;
+
+	old_keep_alives = ie->hdr.bLength - sizeof(ie->hdr);
+	keep_alives = 0;
+	for (cnt = 0;
+	     keep_alives <= WUIE_ELT_MAX && cnt < wusbhc->ports_max;
+	     cnt++) {
+		unsigned tt = msecs_to_jiffies(wusbhc->trust_timeout);
+
+		wusb_port = wusb_port_by_idx(wusbhc, cnt);
+		wusb_dev = wusb_port->wusb_dev;
+
+		if (wusb_dev == NULL)
+			continue;
+		if (wusb_dev->usb_dev == NULL || !wusb_dev->usb_dev->authenticated)
+			continue;
+
+		if (time_after(jiffies, wusb_dev->entry_ts + tt)) {
+			dev_err(dev, "KEEPALIVE: device %u timed out\n",
+				wusb_dev->addr);
+			__wusbhc_dev_disconnect(wusbhc, wusb_port);
+		} else if (time_after(jiffies, wusb_dev->entry_ts + tt/2)) {
+			/* Approaching timeout cut out, need to refresh */
+			ie->bDeviceAddress[keep_alives++] = wusb_dev->addr;
+		}
+	}
+	if (keep_alives & 0x1)	/* pad to even number ([WUSB] section 7.5.9) */
+		ie->bDeviceAddress[keep_alives++] = 0x7f;
+	ie->hdr.bLength = sizeof(ie->hdr) +
+		keep_alives*sizeof(ie->bDeviceAddress[0]);
+	if (keep_alives > 0)
+		wusbhc_mmcie_set(wusbhc, 10, 5, &ie->hdr);
+	else if (old_keep_alives != 0)
+		wusbhc_mmcie_rm(wusbhc, &ie->hdr);
+}
+
+/*
+ * Do a run through all devices checking for timeouts
+ */
+static void wusbhc_keep_alive_run(struct work_struct *ws)
+{
+	struct delayed_work *dw =
+		container_of(ws, struct delayed_work, work);
+	struct wusbhc *wusbhc =
+		container_of(dw, struct wusbhc, keep_alive_timer);
+
+	d_fnstart(5, wusbhc->dev, "(wusbhc %p)\n", wusbhc);
+	if (wusbhc->active) {
+		mutex_lock(&wusbhc->mutex);
+		__wusbhc_keep_alive(wusbhc);
+		mutex_unlock(&wusbhc->mutex);
+		queue_delayed_work(wusbd, &wusbhc->keep_alive_timer,
+				   (wusbhc->trust_timeout * CONFIG_HZ)/1000/2);
+	}
+	d_fnend(5, wusbhc->dev, "(wusbhc %p) = void\n", wusbhc);
+	return;
+}
+
+/*
+ * Find the wusb_dev from its device address.
+ *
+ * The device can be found directly from the address (see
+ * wusb_cack_add() for where the device address is set to port_idx
+ * +2), except when the address is zero.
+ */
+static struct wusb_dev *wusbhc_find_dev_by_addr(struct wusbhc *wusbhc, u8 addr)
+{
+	int p;
+
+	if (addr == 0xff) /* unconnected */
+		return NULL;
+
+	if (addr > 0) {
+		int port = (addr & ~0x80) - 2;
+		if (port < 0 || port >= wusbhc->ports_max)
+			return NULL;
+		return wusb_port_by_idx(wusbhc, port)->wusb_dev;
+	}
+
+	/* Look for the device with address 0. */
+	for (p = 0; p < wusbhc->ports_max; p++) {
+		struct wusb_dev *wusb_dev = wusb_port_by_idx(wusbhc, p)->wusb_dev;
+		if (wusb_dev && wusb_dev->addr == addr)
+			return wusb_dev;
+	}
+	return NULL;
+}
+
+/*
+ * Handle a DN_Alive notification (WUSB1.0[7.6.1])
+ *
+ * This just updates the device activity timestamp and then refreshes
+ * the keep alive IE.
+ *
+ * @wusbhc shall be referenced and unlocked
+ */
+static void wusbhc_handle_dn_alive(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev)
+{
+	struct device *dev = wusbhc->dev;
+
+	d_printf(2, dev, "DN ALIVE: device 0x%02x pong\n", wusb_dev->addr);
+
+	mutex_lock(&wusbhc->mutex);
+	wusb_dev->entry_ts = jiffies;
+	__wusbhc_keep_alive(wusbhc);
+	mutex_unlock(&wusbhc->mutex);
+}
+
+/*
+ * Handle a DN_Connect notification (WUSB1.0[7.6.1])
+ *
+ * @wusbhc
+ * @pkt_hdr
+ * @size:    Size of the buffer where the notification resides; if the
+ *           notification data suggests there should be more data than
+ *           available, an error will be signaled and the whole buffer
+ *           consumed.
+ *
+ * @wusbhc->mutex shall be held
+ */
+static void wusbhc_handle_dn_connect(struct wusbhc *wusbhc,
+				     struct wusb_dn_hdr *dn_hdr,
+				     size_t size)
+{
+	struct device *dev = wusbhc->dev;
+	struct wusb_dn_connect *dnc;
+	char pr_cdid[WUSB_CKHDID_STRSIZE];
+	static const char *beacon_behaviour[] = {
+		"reserved",
+		"self-beacon",
+		"directed-beacon",
+		"no-beacon"
+	};
+
+	d_fnstart(3, dev, "(%p, %p, %zu)\n", wusbhc, dn_hdr, size);
+	if (size < sizeof(*dnc)) {
+		dev_err(dev, "DN CONNECT: short notification (%zu < %zu)\n",
+			size, sizeof(*dnc));
+		goto out;
+	}
+
+	dnc = container_of(dn_hdr, struct wusb_dn_connect, hdr);
+	ckhdid_printf(pr_cdid, sizeof(pr_cdid), &dnc->CDID);
+	dev_info(dev, "DN CONNECT: device %s @ %x (%s) wants to %s\n",
+		 pr_cdid,
+		 wusb_dn_connect_prev_dev_addr(dnc),
+		 beacon_behaviour[wusb_dn_connect_beacon_behavior(dnc)],
+		 wusb_dn_connect_new_connection(dnc) ? "connect" : "reconnect");
+	/* ACK the connect */
+	wusbhc_devconnect_ack(wusbhc, dnc, pr_cdid);
+out:
+	d_fnend(3, dev, "(%p, %p, %zu) = void\n",
+		wusbhc, dn_hdr, size);
+	return;
+}
+
+/*
+ * Handle a DN_Disconnect notification (WUSB1.0[7.6.1])
+ *
+ * Device is going down -- do the disconnect.
+ *
+ * @wusbhc shall be referenced and unlocked
+ */
+static void wusbhc_handle_dn_disconnect(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev)
+{
+	struct device *dev = wusbhc->dev;
+
+	dev_info(dev, "DN DISCONNECT: device 0x%02x going down\n", wusb_dev->addr);
+
+	mutex_lock(&wusbhc->mutex);
+	__wusbhc_dev_disconnect(wusbhc, wusb_port_by_idx(wusbhc, wusb_dev->port_idx));
+	mutex_unlock(&wusbhc->mutex);
+}
+
+/*
+ * Reset a WUSB device on a HWA
+ *
+ * @wusbhc
+ * @port_idx   Index of the port where the device is
+ *
+ * In Wireless USB, a reset is more or less equivalent to a full
+ * disconnect; so we just do a full disconnect and send the device a
+ * Device Reset IE (WUSB1.0[7.5.11]) giving it a few millisecs (6 MMCs).
+ *
+ * @wusbhc should be refcounted and unlocked
+ */
+int wusbhc_dev_reset(struct wusbhc *wusbhc, u8 port_idx)
+{
+	int result;
+	struct device *dev = wusbhc->dev;
+	struct wusb_dev *wusb_dev;
+	struct wuie_reset *ie;
+
+	d_fnstart(3, dev, "(%p, %u)\n", wusbhc, port_idx);
+	mutex_lock(&wusbhc->mutex);
+	result = 0;
+	wusb_dev = wusb_port_by_idx(wusbhc, port_idx)->wusb_dev;
+	if (wusb_dev == NULL) {
+		/* reset no device? ignore */
+		dev_dbg(dev, "RESET: no device at port %u, ignoring\n",
+			port_idx);
+		goto error_unlock;
+	}
+	result = -ENOMEM;
+	ie = kzalloc(sizeof(*ie), GFP_KERNEL);
+	if (ie == NULL)
+		goto error_unlock;
+	ie->hdr.bLength = sizeof(ie->hdr) + sizeof(ie->CDID);
+	ie->hdr.bIEIdentifier = WUIE_ID_RESET_DEVICE;
+	ie->CDID = wusb_dev->cdid;
+	result = wusbhc_mmcie_set(wusbhc, 0xff, 6, &ie->hdr);
+	if (result < 0) {
+		dev_err(dev, "RESET: cant's set MMC: %d\n", result);
+		goto error_kfree;
+	}
+	__wusbhc_dev_disconnect(wusbhc, wusb_port_by_idx(wusbhc, port_idx));
+
+	/* 120ms, hopefully 6 MMCs (FIXME) */
+	msleep(120);
+	wusbhc_mmcie_rm(wusbhc, &ie->hdr);
+error_kfree:
+	kfree(ie);
+error_unlock:
+	mutex_unlock(&wusbhc->mutex);
+	d_fnend(3, dev, "(%p, %u) = %d\n", wusbhc, port_idx, result);
+	return result;
+}
+
+/*
+ * Handle a Device Notification coming a host
+ *
+ * The Device Notification comes from a host (HWA, DWA or WHCI)
+ * wrapped in a set of headers. Somebody else has peeled off those
+ * headers for us and we just get one Device Notifications.
+ *
+ * Invalid DNs (e.g., too short) are discarded.
+ *
+ * @wusbhc shall be referenced
+ *
+ * FIXMES:
+ *  - implement priorities as in WUSB1.0[Table 7-55]?
+ */
+void wusbhc_handle_dn(struct wusbhc *wusbhc, u8 srcaddr,
+		      struct wusb_dn_hdr *dn_hdr, size_t size)
+{
+	struct device *dev = wusbhc->dev;
+	struct wusb_dev *wusb_dev;
+
+	d_fnstart(3, dev, "(%p, %p)\n", wusbhc, dn_hdr);
+
+	if (size < sizeof(struct wusb_dn_hdr)) {
+		dev_err(dev, "DN data shorter than DN header (%d < %d)\n",
+			(int)size, (int)sizeof(struct wusb_dn_hdr));
+		goto out;
+	}
+
+	wusb_dev = wusbhc_find_dev_by_addr(wusbhc, srcaddr);
+	if (wusb_dev == NULL && dn_hdr->bType != WUSB_DN_CONNECT) {
+		dev_dbg(dev, "ignoring DN %d from unconnected device %02x\n",
+			dn_hdr->bType, srcaddr);
+		goto out;
+	}
+
+	switch (dn_hdr->bType) {
+	case WUSB_DN_CONNECT:
+		wusbhc_handle_dn_connect(wusbhc, dn_hdr, size);
+		break;
+	case WUSB_DN_ALIVE:
+		wusbhc_handle_dn_alive(wusbhc, wusb_dev);
+		break;
+	case WUSB_DN_DISCONNECT:
+		wusbhc_handle_dn_disconnect(wusbhc, wusb_dev);
+		break;
+	case WUSB_DN_MASAVAILCHANGED:
+	case WUSB_DN_RWAKE:
+	case WUSB_DN_SLEEP:
+		/* FIXME: handle these DNs. */
+		break;
+	case WUSB_DN_EPRDY:
+		/* The hardware handles these. */
+		break;
+	default:
+		dev_warn(dev, "unknown DN %u (%d octets) from %u\n",
+			 dn_hdr->bType, (int)size, srcaddr);
+	}
+out:
+	d_fnend(3, dev, "(%p, %p) = void\n", wusbhc, dn_hdr);
+	return;
+}
+EXPORT_SYMBOL_GPL(wusbhc_handle_dn);
+
+/*
+ * Disconnect a WUSB device from a the cluster
+ *
+ * @wusbhc
+ * @port     Fake port where the device is (wusbhc index, not USB port number).
+ *
+ * In Wireless USB, a disconnect is basically telling the device he is
+ * being disconnected and forgetting about him.
+ *
+ * We send the device a Device Disconnect IE (WUSB1.0[7.5.11]) for 100
+ * ms and then keep going.
+ *
+ * We don't do much in case of error; we always pretend we disabled
+ * the port and disconnected the device. If physically the request
+ * didn't get there (many things can fail in the way there), the stack
+ * will reject the device's communication attempts.
+ *
+ * @wusbhc should be refcounted and locked
+ */
+void __wusbhc_dev_disable(struct wusbhc *wusbhc, u8 port_idx)
+{
+	int result;
+	struct device *dev = wusbhc->dev;
+	struct wusb_dev *wusb_dev;
+	struct wuie_disconnect *ie;
+
+	d_fnstart(3, dev, "(%p, %u)\n", wusbhc, port_idx);
+	result = 0;
+	wusb_dev = wusb_port_by_idx(wusbhc, port_idx)->wusb_dev;
+	if (wusb_dev == NULL) {
+		/* reset no device? ignore */
+		dev_dbg(dev, "DISCONNECT: no device at port %u, ignoring\n",
+			port_idx);
+		goto error;
+	}
+	__wusbhc_dev_disconnect(wusbhc, wusb_port_by_idx(wusbhc, port_idx));
+
+	result = -ENOMEM;
+	ie = kzalloc(sizeof(*ie), GFP_KERNEL);
+	if (ie == NULL)
+		goto error;
+	ie->hdr.bLength = sizeof(*ie);
+	ie->hdr.bIEIdentifier = WUIE_ID_DEVICE_DISCONNECT;
+	ie->bDeviceAddress = wusb_dev->addr;
+	result = wusbhc_mmcie_set(wusbhc, 0, 0, &ie->hdr);
+	if (result < 0) {
+		dev_err(dev, "DISCONNECT: can't set MMC: %d\n", result);
+		goto error_kfree;
+	}
+
+	/* 120ms, hopefully 6 MMCs */
+	msleep(100);
+	wusbhc_mmcie_rm(wusbhc, &ie->hdr);
+error_kfree:
+	kfree(ie);
+error:
+	d_fnend(3, dev, "(%p, %u) = %d\n", wusbhc, port_idx, result);
+	return;
+}
+
+static void wusb_cap_descr_printf(const unsigned level, struct device *dev,
+				  const struct usb_wireless_cap_descriptor *wcd)
+{
+	d_printf(level, dev,
+		 "WUSB Capability Descriptor\n"
+		 "  bDevCapabilityType          0x%02x\n"
+		 "  bmAttributes                0x%02x\n"
+		 "  wPhyRates                   0x%04x\n"
+		 "  bmTFITXPowerInfo            0x%02x\n"
+		 "  bmFFITXPowerInfo            0x%02x\n"
+		 "  bmBandGroup                 0x%04x\n"
+		 "  bReserved                   0x%02x\n",
+		 wcd->bDevCapabilityType,
+		 wcd->bmAttributes,
+		 le16_to_cpu(wcd->wPHYRates),
+		 wcd->bmTFITXPowerInfo,
+		 wcd->bmFFITXPowerInfo,
+		 wcd->bmBandGroup,
+		 wcd->bReserved);
+}
+
+/*
+ * Walk over the BOS descriptor, verify and grok it
+ *
+ * @usb_dev: referenced
+ * @wusb_dev: referenced and unlocked
+ *
+ * The BOS descriptor is defined at WUSB1.0[7.4.1], and it defines a
+ * "flexible" way to wrap all kinds of descriptors inside an standard
+ * descriptor (wonder why they didn't use normal descriptors,
+ * btw). Not like they lack code.
+ *
+ * At the end we go to look for the WUSB Device Capabilities
+ * (WUSB1.0[7.4.1.1]) that is wrapped in a device capability descriptor
+ * that is part of the BOS descriptor set. That tells us what does the
+ * device support (dual role, beacon type, UWB PHY rates).
+ */
+static int wusb_dev_bos_grok(struct usb_device *usb_dev,
+			     struct wusb_dev *wusb_dev,
+			     struct usb_bos_descriptor *bos, size_t desc_size)
+{
+	ssize_t result;
+	struct device *dev = &usb_dev->dev;
+	void *itr, *top;
+
+	/* Walk over BOS capabilities, verify them */
+	itr = (void *)bos + sizeof(*bos);
+	top = itr + desc_size - sizeof(*bos);
+	while (itr < top) {
+		struct usb_dev_cap_header *cap_hdr = itr;
+		size_t cap_size;
+		u8 cap_type;
+		if (top - itr < sizeof(*cap_hdr)) {
+			dev_err(dev, "Device BUG? premature end of BOS header "
+				"data [offset 0x%02x]: only %zu bytes left\n",
+				(int)(itr - (void *)bos), top - itr);
+			result = -ENOSPC;
+			goto error_bad_cap;
+		}
+		cap_size = cap_hdr->bLength;
+		cap_type = cap_hdr->bDevCapabilityType;
+		d_printf(4, dev, "BOS Capability: 0x%02x (%zu bytes)\n",
+			 cap_type, cap_size);
+		if (cap_size == 0)
+			break;
+		if (cap_size > top - itr) {
+			dev_err(dev, "Device BUG? premature end of BOS data "
+				"[offset 0x%02x cap %02x %zu bytes]: "
+				"only %zu bytes left\n",
+				(int)(itr - (void *)bos),
+				cap_type, cap_size, top - itr);
+			result = -EBADF;
+			goto error_bad_cap;
+		}
+		d_dump(3, dev, itr, cap_size);
+		switch (cap_type) {
+		case USB_CAP_TYPE_WIRELESS_USB:
+			if (cap_size != sizeof(*wusb_dev->wusb_cap_descr))
+				dev_err(dev, "Device BUG? WUSB Capability "
+					"descriptor is %zu bytes vs %zu "
+					"needed\n", cap_size,
+					sizeof(*wusb_dev->wusb_cap_descr));
+			else {
+				wusb_dev->wusb_cap_descr = itr;
+				wusb_cap_descr_printf(3, dev, itr);
+			}
+			break;
+		default:
+			dev_err(dev, "BUG? Unknown BOS capability 0x%02x "
+				"(%zu bytes) at offset 0x%02x\n", cap_type,
+				cap_size, (int)(itr - (void *)bos));
+		}
+		itr += cap_size;
+	}
+	result = 0;
+error_bad_cap:
+	return result;
+}
+
+/*
+ * Add information from the BOS descriptors to the device
+ *
+ * @usb_dev: referenced
+ * @wusb_dev: referenced and unlocked
+ *
+ * So what we do is we alloc a space for the BOS descriptor of 64
+ * bytes; read the first four bytes which include the wTotalLength
+ * field (WUSB1.0[T7-26]) and if it fits in those 64 bytes, read the
+ * whole thing. If not we realloc to that size.
+ *
+ * Then we call the groking function, that will fill up
+ * wusb_dev->wusb_cap_descr, which is what we'll need later on.
+ */
+static int wusb_dev_bos_add(struct usb_device *usb_dev,
+			    struct wusb_dev *wusb_dev)
+{
+	ssize_t result;
+	struct device *dev = &usb_dev->dev;
+	struct usb_bos_descriptor *bos;
+	size_t alloc_size = 32, desc_size = 4;
+
+	bos = kmalloc(alloc_size, GFP_KERNEL);
+	if (bos == NULL)
+		return -ENOMEM;
+	result = usb_get_descriptor(usb_dev, USB_DT_BOS, 0, bos, desc_size);
+	if (result < 4) {
+		dev_err(dev, "Can't get BOS descriptor or too short: %zd\n",
+			result);
+		goto error_get_descriptor;
+	}
+	desc_size = le16_to_cpu(bos->wTotalLength);
+	if (desc_size >= alloc_size) {
+		kfree(bos);
+		alloc_size = desc_size;
+		bos = kmalloc(alloc_size, GFP_KERNEL);
+		if (bos == NULL)
+			return -ENOMEM;
+	}
+	result = usb_get_descriptor(usb_dev, USB_DT_BOS, 0, bos, desc_size);
+	if (result < 0 || result != desc_size) {
+		dev_err(dev, "Can't get  BOS descriptor or too short (need "
+			"%zu bytes): %zd\n", desc_size, result);
+		goto error_get_descriptor;
+	}
+	if (result < sizeof(*bos)
+	    || le16_to_cpu(bos->wTotalLength) != desc_size) {
+		dev_err(dev, "Can't get  BOS descriptor or too short (need "
+			"%zu bytes): %zd\n", desc_size, result);
+		goto error_get_descriptor;
+	}
+	d_printf(2, dev, "Got BOS descriptor %zd bytes, %u capabilities\n",
+		 result, bos->bNumDeviceCaps);
+	d_dump(2, dev, bos, result);
+	result = wusb_dev_bos_grok(usb_dev, wusb_dev, bos, result);
+	if (result < 0)
+		goto error_bad_bos;
+	wusb_dev->bos = bos;
+	return 0;
+
+error_bad_bos:
+error_get_descriptor:
+	kfree(bos);
+	wusb_dev->wusb_cap_descr = NULL;
+	return result;
+}
+
+static void wusb_dev_bos_rm(struct wusb_dev *wusb_dev)
+{
+	kfree(wusb_dev->bos);
+	wusb_dev->wusb_cap_descr = NULL;
+};
+
+static struct usb_wireless_cap_descriptor wusb_cap_descr_default = {
+	.bLength = sizeof(wusb_cap_descr_default),
+	.bDescriptorType = USB_DT_DEVICE_CAPABILITY,
+	.bDevCapabilityType = USB_CAP_TYPE_WIRELESS_USB,
+
+	.bmAttributes = USB_WIRELESS_BEACON_NONE,
+	.wPHYRates = cpu_to_le16(USB_WIRELESS_PHY_53),
+	.bmTFITXPowerInfo = 0,
+	.bmFFITXPowerInfo = 0,
+	.bmBandGroup = cpu_to_le16(0x0001),	/* WUSB1.0[7.4.1] bottom */
+	.bReserved = 0
+};
+
+/*
+ * USB stack's device addition Notifier Callback
+ *
+ * Called from drivers/usb/core/hub.c when a new device is added; we
+ * use this hook to perform certain WUSB specific setup work on the
+ * new device. As well, it is the first time we can connect the
+ * wusb_dev and the usb_dev. So we note it down in wusb_dev and take a
+ * reference that we'll drop.
+ *
+ * First we need to determine if the device is a WUSB device (else we
+ * ignore it). For that we use the speed setting (USB_SPEED_VARIABLE)
+ * [FIXME: maybe we'd need something more definitive]. If so, we track
+ * it's usb_busd and from there, the WUSB HC.
+ *
+ * Because all WUSB HCs are contained in a 'struct wusbhc', voila, we
+ * get the wusbhc for the device.
+ *
+ * We have a reference on @usb_dev (as we are called at the end of its
+ * enumeration).
+ *
+ * NOTE: @usb_dev locked
+ */
+static void wusb_dev_add_ncb(struct usb_device *usb_dev)
+{
+	int result = 0;
+	struct wusb_dev *wusb_dev;
+	struct wusbhc *wusbhc;
+	struct device *dev = &usb_dev->dev;
+	u8 port_idx;
+
+	if (usb_dev->wusb == 0 || usb_dev->devnum == 1)
+		return;		/* skip non wusb and wusb RHs */
+
+	d_fnstart(3, dev, "(usb_dev %p)\n", usb_dev);
+
+	wusbhc = wusbhc_get_by_usb_dev(usb_dev);
+	if (wusbhc == NULL)
+		goto error_nodev;
+	mutex_lock(&wusbhc->mutex);
+	wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, usb_dev);
+	port_idx = wusb_port_no_to_idx(usb_dev->portnum);
+	mutex_unlock(&wusbhc->mutex);
+	if (wusb_dev == NULL)
+		goto error_nodev;
+	wusb_dev->usb_dev = usb_get_dev(usb_dev);
+	usb_dev->wusb_dev = wusb_dev_get(wusb_dev);
+	result = wusb_dev_sec_add(wusbhc, usb_dev, wusb_dev);
+	if (result < 0) {
+		dev_err(dev, "Cannot enable security: %d\n", result);
+		goto error_sec_add;
+	}
+	/* Now query the device for it's BOS and attach it to wusb_dev */
+	result = wusb_dev_bos_add(usb_dev, wusb_dev);
+	if (result < 0) {
+		dev_err(dev, "Cannot get BOS descriptors: %d\n", result);
+		goto error_bos_add;
+	}
+	result = wusb_dev_sysfs_add(wusbhc, usb_dev, wusb_dev);
+	if (result < 0)
+		goto error_add_sysfs;
+out:
+	wusb_dev_put(wusb_dev);
+	wusbhc_put(wusbhc);
+error_nodev:
+	d_fnend(3, dev, "(usb_dev %p) = void\n", usb_dev);
+	return;
+
+	wusb_dev_sysfs_rm(wusb_dev);
+error_add_sysfs:
+	wusb_dev_bos_rm(wusb_dev);
+error_bos_add:
+	wusb_dev_sec_rm(wusb_dev);
+error_sec_add:
+	mutex_lock(&wusbhc->mutex);
+	__wusbhc_dev_disconnect(wusbhc, wusb_port_by_idx(wusbhc, port_idx));
+	mutex_unlock(&wusbhc->mutex);
+	goto out;
+}
+
+/*
+ * Undo all the steps done at connection by the notifier callback
+ *
+ * NOTE: @usb_dev locked
+ */
+static void wusb_dev_rm_ncb(struct usb_device *usb_dev)
+{
+	struct wusb_dev *wusb_dev = usb_dev->wusb_dev;
+
+	if (usb_dev->wusb == 0 || usb_dev->devnum == 1)
+		return;		/* skip non wusb and wusb RHs */
+
+	wusb_dev_sysfs_rm(wusb_dev);
+	wusb_dev_bos_rm(wusb_dev);
+	wusb_dev_sec_rm(wusb_dev);
+	wusb_dev->usb_dev = NULL;
+	usb_dev->wusb_dev = NULL;
+	wusb_dev_put(wusb_dev);
+	usb_put_dev(usb_dev);
+}
+
+/*
+ * Handle notifications from the USB stack (notifier call back)
+ *
+ * This is called when the USB stack does a
+ * usb_{bus,device}_{add,remove}() so we can do WUSB specific
+ * handling. It is called with [for the case of
+ * USB_DEVICE_{ADD,REMOVE} with the usb_dev locked.
+ */
+int wusb_usb_ncb(struct notifier_block *nb, unsigned long val,
+		 void *priv)
+{
+	int result = NOTIFY_OK;
+
+	switch (val) {
+	case USB_DEVICE_ADD:
+		wusb_dev_add_ncb(priv);
+		break;
+	case USB_DEVICE_REMOVE:
+		wusb_dev_rm_ncb(priv);
+		break;
+	case USB_BUS_ADD:
+		/* ignore (for now) */
+	case USB_BUS_REMOVE:
+		break;
+	default:
+		WARN_ON(1);
+		result = NOTIFY_BAD;
+	};
+	return result;
+}
+
+/*
+ * Return a referenced wusb_dev given a @wusbhc and @usb_dev
+ */
+struct wusb_dev *__wusb_dev_get_by_usb_dev(struct wusbhc *wusbhc,
+					   struct usb_device *usb_dev)
+{
+	struct wusb_dev *wusb_dev;
+	u8 port_idx;
+
+	port_idx = wusb_port_no_to_idx(usb_dev->portnum);
+	BUG_ON(port_idx > wusbhc->ports_max);
+	wusb_dev = wusb_port_by_idx(wusbhc, port_idx)->wusb_dev;
+	if (wusb_dev != NULL)		/* ops, device is gone */
+		wusb_dev_get(wusb_dev);
+	return wusb_dev;
+}
+EXPORT_SYMBOL_GPL(__wusb_dev_get_by_usb_dev);
+
+void wusb_dev_destroy(struct kref *_wusb_dev)
+{
+	struct wusb_dev *wusb_dev
+		= container_of(_wusb_dev, struct wusb_dev, refcnt);
+	list_del_init(&wusb_dev->cack_node);
+	wusb_dev_free(wusb_dev);
+	d_fnend(1, NULL, "%s (wusb_dev %p) = void\n", __func__, wusb_dev);
+}
+EXPORT_SYMBOL_GPL(wusb_dev_destroy);
+
+/*
+ * Create all the device connect handling infrastructure
+ *
+ * This is basically the device info array, Connect Acknowledgement
+ * (cack) lists, keep-alive timers (and delayed work thread).
+ */
+int wusbhc_devconnect_create(struct wusbhc *wusbhc)
+{
+	d_fnstart(3, wusbhc->dev, "(wusbhc %p)\n", wusbhc);
+
+	wusbhc->keep_alive_ie.hdr.bIEIdentifier = WUIE_ID_KEEP_ALIVE;
+	wusbhc->keep_alive_ie.hdr.bLength = sizeof(wusbhc->keep_alive_ie.hdr);
+	INIT_DELAYED_WORK(&wusbhc->keep_alive_timer, wusbhc_keep_alive_run);
+
+	wusbhc->cack_ie.hdr.bIEIdentifier = WUIE_ID_CONNECTACK;
+	wusbhc->cack_ie.hdr.bLength = sizeof(wusbhc->cack_ie.hdr);
+	INIT_LIST_HEAD(&wusbhc->cack_list);
+
+	d_fnend(3, wusbhc->dev, "(wusbhc %p) = void\n", wusbhc);
+	return 0;
+}
+
+/*
+ * Release all resources taken by the devconnect stuff
+ */
+void wusbhc_devconnect_destroy(struct wusbhc *wusbhc)
+{
+	d_fnstart(3, wusbhc->dev, "(wusbhc %p)\n", wusbhc);
+	d_fnend(3, wusbhc->dev, "(wusbhc %p) = void\n", wusbhc);
+}
+
+/*
+ * wusbhc_devconnect_start - start accepting device connections
+ * @wusbhc: the WUSB HC
+ *
+ * Sets the Host Info IE to accept all new connections.
+ *
+ * FIXME: This also enables the keep alives but this is not necessary
+ * until there are connected and authenticated devices.
+ */
+int wusbhc_devconnect_start(struct wusbhc *wusbhc,
+			    const struct wusb_ckhdid *chid)
+{
+	struct device *dev = wusbhc->dev;
+	struct wuie_host_info *hi;
+	int result;
+
+	hi = kzalloc(sizeof(*hi), GFP_KERNEL);
+	if (hi == NULL)
+		return -ENOMEM;
+
+	hi->hdr.bLength       = sizeof(*hi);
+	hi->hdr.bIEIdentifier = WUIE_ID_HOST_INFO;
+	hi->attributes        = cpu_to_le16((wusbhc->rsv->stream << 3) | WUIE_HI_CAP_ALL);
+	hi->CHID              = *chid;
+	result = wusbhc_mmcie_set(wusbhc, 0, 0, &hi->hdr);
+	if (result < 0) {
+		dev_err(dev, "Cannot add Host Info MMCIE: %d\n", result);
+		goto error_mmcie_set;
+	}
+	wusbhc->wuie_host_info = hi;
+
+	queue_delayed_work(wusbd, &wusbhc->keep_alive_timer,
+			   (wusbhc->trust_timeout*CONFIG_HZ)/1000/2);
+
+	return 0;
+
+error_mmcie_set:
+	kfree(hi);
+	return result;
+}
+
+/*
+ * wusbhc_devconnect_stop - stop managing connected devices
+ * @wusbhc: the WUSB HC
+ *
+ * Removes the Host Info IE and stops the keep alives.
+ *
+ * FIXME: should this disconnect all devices?
+ */
+void wusbhc_devconnect_stop(struct wusbhc *wusbhc)
+{
+	cancel_delayed_work_sync(&wusbhc->keep_alive_timer);
+	WARN_ON(!list_empty(&wusbhc->cack_list));
+
+	wusbhc_mmcie_rm(wusbhc, &wusbhc->wuie_host_info->hdr);
+	kfree(wusbhc->wuie_host_info);
+	wusbhc->wuie_host_info = NULL;
+}
+
+/*
+ * wusb_set_dev_addr - set the WUSB device address used by the host
+ * @wusbhc: the WUSB HC the device is connect to
+ * @wusb_dev: the WUSB device
+ * @addr: new device address
+ */
+int wusb_set_dev_addr(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev, u8 addr)
+{
+	int result;
+
+	wusb_dev->addr = addr;
+	result = wusbhc->dev_info_set(wusbhc, wusb_dev);
+	if (result < 0)
+		dev_err(wusbhc->dev, "device %d: failed to set device "
+			"address\n", wusb_dev->port_idx);
+	else
+		dev_info(wusbhc->dev, "device %d: %s addr %u\n",
+			 wusb_dev->port_idx,
+			 (addr & WUSB_DEV_ADDR_UNAUTH) ? "unauth" : "auth",
+			 wusb_dev->addr);
+
+	return result;
+}
diff --git a/drivers/usb/wusbcore/mmc.c b/drivers/usb/wusbcore/mmc.c
new file mode 100644
index 0000000..cfa77a0
--- /dev/null
+++ b/drivers/usb/wusbcore/mmc.c
@@ -0,0 +1,321 @@
+/*
+ * WUSB Wire Adapter: Control/Data Streaming Interface (WUSB[8])
+ * MMC (Microscheduled Management Command) handling
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * WUIEs and MMC IEs...well, they are almost the same at the end. MMC
+ * IEs are Wireless USB IEs that go into the MMC period...[what is
+ * that? look in Design-overview.txt].
+ *
+ *
+ * This is a simple subsystem to keep track of which IEs are being
+ * sent by the host in the MMC period.
+ *
+ * For each WUIE we ask to send, we keep it in an array, so we can
+ * request its removal later, or replace the content. They are tracked
+ * by pointer, so be sure to use the same pointer if you want to
+ * remove it or update the contents.
+ *
+ * FIXME:
+ *  - add timers that autoremove intervalled IEs?
+ */
+#include <linux/usb/wusb.h>
+#include "wusbhc.h"
+
+/* Initialize the MMCIEs handling mechanism */
+int wusbhc_mmcie_create(struct wusbhc *wusbhc)
+{
+	u8 mmcies = wusbhc->mmcies_max;
+	wusbhc->mmcie = kcalloc(mmcies, sizeof(wusbhc->mmcie[0]), GFP_KERNEL);
+	if (wusbhc->mmcie == NULL)
+		return -ENOMEM;
+	mutex_init(&wusbhc->mmcie_mutex);
+	return 0;
+}
+
+/* Release resources used by the MMCIEs handling mechanism */
+void wusbhc_mmcie_destroy(struct wusbhc *wusbhc)
+{
+	kfree(wusbhc->mmcie);
+}
+
+/*
+ * Add or replace an MMC Wireless USB IE.
+ *
+ * @interval:    See WUSB1.0[8.5.3.1]
+ * @repeat_cnt:  See WUSB1.0[8.5.3.1]
+ * @handle:      See WUSB1.0[8.5.3.1]
+ * @wuie:        Pointer to the header of the WUSB IE data to add.
+ *               MUST BE allocated in a kmalloc buffer (no stack or
+ *               vmalloc).
+ *               THE CALLER ALWAYS OWNS THE POINTER (we don't free it
+ *               on remove, we just forget about it).
+ * @returns:     0 if ok, < 0 errno code on error.
+ *
+ * Goes over the *whole* @wusbhc->mmcie array looking for (a) the
+ * first free spot and (b) if @wuie is already in the array (aka:
+ * transmitted in the MMCs) the spot were it is.
+ *
+ * If present, we "overwrite it" (update).
+ *
+ *
+ * NOTE: Need special ordering rules -- see below WUSB1.0 Table 7-38.
+ *       The host uses the handle as the 'sort' index. We
+ *       allocate the last one always for the WUIE_ID_HOST_INFO, and
+ *       the rest, first come first serve in inverse order.
+ *
+ *       Host software must make sure that it adds the other IEs in
+ *       the right order... the host hardware is responsible for
+ *       placing the WCTA IEs in the right place with the other IEs
+ *       set by host software.
+ *
+ * NOTE: we can access wusbhc->wa_descr without locking because it is
+ *       read only.
+ */
+int wusbhc_mmcie_set(struct wusbhc *wusbhc, u8 interval, u8 repeat_cnt,
+		     struct wuie_hdr *wuie)
+{
+	int result = -ENOBUFS;
+	unsigned handle, itr;
+
+	/* Search a handle, taking into account the ordering */
+	mutex_lock(&wusbhc->mmcie_mutex);
+	switch (wuie->bIEIdentifier) {
+	case WUIE_ID_HOST_INFO:
+		/* Always last */
+		handle = wusbhc->mmcies_max - 1;
+		break;
+	case WUIE_ID_ISOCH_DISCARD:
+		dev_err(wusbhc->dev, "Special ordering case for WUIE ID 0x%x "
+			"unimplemented\n", wuie->bIEIdentifier);
+		result = -ENOSYS;
+		goto error_unlock;
+	default:
+		/* search for it or find the last empty slot */
+		handle = ~0;
+		for (itr = 0; itr < wusbhc->mmcies_max - 1; itr++) {
+			if (wusbhc->mmcie[itr] == wuie) {
+				handle = itr;
+				break;
+			}
+			if (wusbhc->mmcie[itr] == NULL)
+				handle = itr;
+		}
+		if (handle == ~0)
+			goto error_unlock;
+	}
+	result = (wusbhc->mmcie_add)(wusbhc, interval, repeat_cnt, handle,
+				     wuie);
+	if (result >= 0)
+		wusbhc->mmcie[handle] = wuie;
+error_unlock:
+	mutex_unlock(&wusbhc->mmcie_mutex);
+	return result;
+}
+EXPORT_SYMBOL_GPL(wusbhc_mmcie_set);
+
+/*
+ * Remove an MMC IE previously added with wusbhc_mmcie_set()
+ *
+ * @wuie	Pointer used to add the WUIE
+ */
+void wusbhc_mmcie_rm(struct wusbhc *wusbhc, struct wuie_hdr *wuie)
+{
+	int result;
+	unsigned handle, itr;
+
+	mutex_lock(&wusbhc->mmcie_mutex);
+	for (itr = 0; itr < wusbhc->mmcies_max; itr++) {
+		if (wusbhc->mmcie[itr] == wuie) {
+			handle = itr;
+			goto found;
+		}
+	}
+	mutex_unlock(&wusbhc->mmcie_mutex);
+	return;
+
+found:
+	result = (wusbhc->mmcie_rm)(wusbhc, handle);
+	if (result == 0)
+		wusbhc->mmcie[itr] = NULL;
+	mutex_unlock(&wusbhc->mmcie_mutex);
+}
+EXPORT_SYMBOL_GPL(wusbhc_mmcie_rm);
+
+/*
+ * wusbhc_start - start transmitting MMCs and accepting connections
+ * @wusbhc: the HC to start
+ * @chid: the CHID to use for this host
+ *
+ * Establishes a cluster reservation, enables device connections, and
+ * starts MMCs with appropriate DNTS parameters.
+ */
+int wusbhc_start(struct wusbhc *wusbhc, const struct wusb_ckhdid *chid)
+{
+	int result;
+	struct device *dev = wusbhc->dev;
+
+	WARN_ON(wusbhc->wuie_host_info != NULL);
+
+	result = wusbhc_rsv_establish(wusbhc);
+	if (result < 0) {
+		dev_err(dev, "cannot establish cluster reservation: %d\n",
+			result);
+		goto error_rsv_establish;
+	}
+
+	result = wusbhc_devconnect_start(wusbhc, chid);
+	if (result < 0) {
+		dev_err(dev, "error enabling device connections: %d\n", result);
+		goto error_devconnect_start;
+	}
+
+	result = wusbhc_sec_start(wusbhc);
+	if (result < 0) {
+		dev_err(dev, "error starting security in the HC: %d\n", result);
+		goto error_sec_start;
+	}
+	/* FIXME: the choice of the DNTS parameters is somewhat
+	 * arbitrary */
+	result = wusbhc->set_num_dnts(wusbhc, 0, 15);
+	if (result < 0) {
+		dev_err(dev, "Cannot set DNTS parameters: %d\n", result);
+		goto error_set_num_dnts;
+	}
+	result = wusbhc->start(wusbhc);
+	if (result < 0) {
+		dev_err(dev, "error starting wusbch: %d\n", result);
+		goto error_wusbhc_start;
+	}
+	wusbhc->active = 1;
+	return 0;
+
+error_wusbhc_start:
+	wusbhc_sec_stop(wusbhc);
+error_set_num_dnts:
+error_sec_start:
+	wusbhc_devconnect_stop(wusbhc);
+error_devconnect_start:
+	wusbhc_rsv_terminate(wusbhc);
+error_rsv_establish:
+	return result;
+}
+
+/*
+ * Disconnect all from the WUSB Channel
+ *
+ * Send a Host Disconnect IE in the MMC, wait, don't send it any more
+ */
+static int __wusbhc_host_disconnect_ie(struct wusbhc *wusbhc)
+{
+	int result = -ENOMEM;
+	struct wuie_host_disconnect *host_disconnect_ie;
+	might_sleep();
+	host_disconnect_ie = kmalloc(sizeof(*host_disconnect_ie), GFP_KERNEL);
+	if (host_disconnect_ie == NULL)
+		goto error_alloc;
+	host_disconnect_ie->hdr.bLength       = sizeof(*host_disconnect_ie);
+	host_disconnect_ie->hdr.bIEIdentifier = WUIE_ID_HOST_DISCONNECT;
+	result = wusbhc_mmcie_set(wusbhc, 0, 0, &host_disconnect_ie->hdr);
+	if (result < 0)
+		goto error_mmcie_set;
+
+	/* WUSB1.0[8.5.3.1 & 7.5.2] */
+	msleep(100);
+	wusbhc_mmcie_rm(wusbhc, &host_disconnect_ie->hdr);
+error_mmcie_set:
+	kfree(host_disconnect_ie);
+error_alloc:
+	return result;
+}
+
+/*
+ * wusbhc_stop - stop transmitting MMCs
+ * @wusbhc: the HC to stop
+ *
+ * Send a Host Disconnect IE, wait, remove all the MMCs (stop sending MMCs).
+ *
+ * If we can't allocate a Host Stop IE, screw it, we don't notify the
+ * devices we are disconnecting...
+ */
+void wusbhc_stop(struct wusbhc *wusbhc)
+{
+	if (wusbhc->active) {
+		wusbhc->active = 0;
+		wusbhc->stop(wusbhc);
+		wusbhc_sec_stop(wusbhc);
+		__wusbhc_host_disconnect_ie(wusbhc);
+		wusbhc_devconnect_stop(wusbhc);
+		wusbhc_rsv_terminate(wusbhc);
+	}
+}
+EXPORT_SYMBOL_GPL(wusbhc_stop);
+
+/*
+ * Change the CHID in a WUSB Channel
+ *
+ * If it is just a new CHID, send a Host Disconnect IE and then change
+ * the CHID IE.
+ */
+static int __wusbhc_chid_change(struct wusbhc *wusbhc,
+				const struct wusb_ckhdid *chid)
+{
+	int result = -ENOSYS;
+	struct device *dev = wusbhc->dev;
+	dev_err(dev, "%s() not implemented yet\n", __func__);
+	return result;
+
+	BUG_ON(wusbhc->wuie_host_info == NULL);
+	__wusbhc_host_disconnect_ie(wusbhc);
+	wusbhc->wuie_host_info->CHID = *chid;
+	result = wusbhc_mmcie_set(wusbhc, 0, 0, &wusbhc->wuie_host_info->hdr);
+	if (result < 0)
+		dev_err(dev, "Can't update Host Info WUSB IE: %d\n", result);
+	return result;
+}
+
+/*
+ * Set/reset/update a new CHID
+ *
+ * Depending on the previous state of the MMCs, start, stop or change
+ * the sent MMC. This effectively switches the host controller on and
+ * off (radio wise).
+ */
+int wusbhc_chid_set(struct wusbhc *wusbhc, const struct wusb_ckhdid *chid)
+{
+	int result = 0;
+
+	if (memcmp(chid, &wusb_ckhdid_zero, sizeof(chid)) == 0)
+		chid = NULL;
+
+	mutex_lock(&wusbhc->mutex);
+	if (wusbhc->active) {
+		if (chid)
+			result = __wusbhc_chid_change(wusbhc, chid);
+		else
+			wusbhc_stop(wusbhc);
+	} else {
+		if (chid)
+			wusbhc_start(wusbhc, chid);
+	}
+	mutex_unlock(&wusbhc->mutex);
+	return result;
+}
+EXPORT_SYMBOL_GPL(wusbhc_chid_set);
diff --git a/drivers/usb/wusbcore/pal.c b/drivers/usb/wusbcore/pal.c
new file mode 100644
index 0000000..7cc51e9
--- /dev/null
+++ b/drivers/usb/wusbcore/pal.c
@@ -0,0 +1,42 @@
+/*
+ * Wireless USB Host Controller
+ * UWB Protocol Adaptation Layer (PAL) glue.
+ *
+ * Copyright (C) 2008 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "wusbhc.h"
+
+/**
+ * wusbhc_pal_register - register the WUSB HC as a UWB PAL
+ * @wusbhc: the WUSB HC
+ */
+int wusbhc_pal_register(struct wusbhc *wusbhc)
+{
+	uwb_pal_init(&wusbhc->pal);
+
+	wusbhc->pal.name   = "wusbhc";
+	wusbhc->pal.device = wusbhc->usb_hcd.self.controller;
+
+	return uwb_pal_register(wusbhc->uwb_rc, &wusbhc->pal);
+}
+
+/**
+ * wusbhc_pal_register - unregister the WUSB HC as a UWB PAL
+ * @wusbhc: the WUSB HC
+ */
+void wusbhc_pal_unregister(struct wusbhc *wusbhc)
+{
+	uwb_pal_unregister(wusbhc->uwb_rc, &wusbhc->pal);
+}
diff --git a/drivers/usb/wusbcore/reservation.c b/drivers/usb/wusbcore/reservation.c
new file mode 100644
index 0000000..fc63e77
--- /dev/null
+++ b/drivers/usb/wusbcore/reservation.c
@@ -0,0 +1,115 @@
+/*
+ * WUSB cluster reservation management
+ *
+ * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/kernel.h>
+#include <linux/uwb.h>
+
+#include "wusbhc.h"
+
+/*
+ * WUSB cluster reservations are multicast reservations with the
+ * broadcast cluster ID (BCID) as the target DevAddr.
+ *
+ * FIXME: consider adjusting the reservation depending on what devices
+ * are attached.
+ */
+
+static int wusbhc_bwa_set(struct wusbhc *wusbhc, u8 stream,
+	const struct uwb_mas_bm *mas)
+{
+	if (mas == NULL)
+		mas = &uwb_mas_bm_zero;
+	return wusbhc->bwa_set(wusbhc, stream, mas);
+}
+
+/**
+ * wusbhc_rsv_complete_cb - WUSB HC reservation complete callback
+ * @rsv:    the reservation
+ *
+ * Either set or clear the HC's view of the reservation.
+ *
+ * FIXME: when a reservation is denied the HC should be stopped.
+ */
+static void wusbhc_rsv_complete_cb(struct uwb_rsv *rsv)
+{
+	struct wusbhc *wusbhc = rsv->pal_priv;
+	struct device *dev = wusbhc->dev;
+	char buf[72];
+
+	switch (rsv->state) {
+	case UWB_RSV_STATE_O_ESTABLISHED:
+		bitmap_scnprintf(buf, sizeof(buf), rsv->mas.bm, UWB_NUM_MAS);
+		dev_dbg(dev, "established reservation: %s\n", buf);
+		wusbhc_bwa_set(wusbhc, rsv->stream, &rsv->mas);
+		break;
+	case UWB_RSV_STATE_NONE:
+		dev_dbg(dev, "removed reservation\n");
+		wusbhc_bwa_set(wusbhc, 0, NULL);
+		wusbhc->rsv = NULL;
+		break;
+	default:
+		dev_dbg(dev, "unexpected reservation state: %d\n", rsv->state);
+		break;
+	}
+}
+
+
+/**
+ * wusbhc_rsv_establish - establish a reservation for the cluster
+ * @wusbhc: the WUSB HC requesting a bandwith reservation
+ */
+int wusbhc_rsv_establish(struct wusbhc *wusbhc)
+{
+	struct uwb_rc *rc = wusbhc->uwb_rc;
+	struct uwb_rsv *rsv;
+	struct uwb_dev_addr bcid;
+	int ret;
+
+	rsv = uwb_rsv_create(rc, wusbhc_rsv_complete_cb, wusbhc);
+	if (rsv == NULL)
+		return -ENOMEM;
+
+	bcid.data[0] = wusbhc->cluster_id;
+	bcid.data[1] = 0;
+
+	rsv->owner = &rc->uwb_dev;
+	rsv->target.type = UWB_RSV_TARGET_DEVADDR;
+	rsv->target.devaddr = bcid;
+	rsv->type = UWB_DRP_TYPE_PRIVATE;
+	rsv->max_mas = 256;
+	rsv->min_mas = 16;  /* one MAS per zone? */
+	rsv->sparsity = 16; /* at least one MAS in each zone? */
+	rsv->is_multicast = true;
+
+	ret = uwb_rsv_establish(rsv);
+	if (ret == 0)
+		wusbhc->rsv = rsv;
+	else
+		uwb_rsv_destroy(rsv);
+	return ret;
+}
+
+
+/**
+ * wusbhc_rsv_terminate - terminate any cluster reservation
+ * @wusbhc: the WUSB host whose reservation is to be terminated
+ */
+void wusbhc_rsv_terminate(struct wusbhc *wusbhc)
+{
+	if (wusbhc->rsv)
+		uwb_rsv_terminate(wusbhc->rsv);
+}
diff --git a/drivers/usb/wusbcore/rh.c b/drivers/usb/wusbcore/rh.c
new file mode 100644
index 0000000..267a643
--- /dev/null
+++ b/drivers/usb/wusbcore/rh.c
@@ -0,0 +1,477 @@
+/*
+ * Wireless USB Host Controller
+ * Root Hub operations
+ *
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * We fake a root hub that has fake ports (as many as simultaneous
+ * devices the Wireless USB Host Controller can deal with). For each
+ * port we keep an state in @wusbhc->port[index] identical to the one
+ * specified in the USB2.0[ch11] spec and some extra device
+ * information that complements the one in 'struct usb_device' (as
+ * this lacs a hcpriv pointer).
+ *
+ * Note this is common to WHCI and HWA host controllers.
+ *
+ * Through here we enable most of the state changes that the USB stack
+ * will use to connect or disconnect devices. We need to do some
+ * forced adaptation of Wireless USB device states vs. wired:
+ *
+ *        USB:                 WUSB:
+ *
+ * Port   Powered-off          port slot n/a
+ *        Powered-on           port slot available
+ *        Disconnected         port slot available
+ *        Connected            port slot assigned device
+ *        		       device sent DN_Connect
+ *                             device was authenticated
+ *        Enabled              device is authenticated, transitioned
+ *                             from unauth -> auth -> default address
+ *                             -> enabled
+ *        Reset                disconnect
+ *        Disable              disconnect
+ *
+ * This maps the standard USB port states with the WUSB device states
+ * so we can fake ports without having to modify the USB stack.
+ *
+ * FIXME: this process will change in the future
+ *
+ *
+ * ENTRY POINTS
+ *
+ * Our entry points into here are, as in hcd.c, the USB stack root hub
+ * ops defined in the usb_hcd struct:
+ *
+ * wusbhc_rh_status_data()	Provide hub and port status data bitmap
+ *
+ * wusbhc_rh_control()          Execution of all the major requests
+ *                              you can do to a hub (Set|Clear
+ *                              features, get descriptors, status, etc).
+ *
+ * wusbhc_rh_[suspend|resume]() That
+ *
+ * wusbhc_rh_start_port_reset() ??? unimplemented
+ */
+#include "wusbhc.h"
+
+#define D_LOCAL 0
+#include <linux/uwb/debug.h>
+
+/*
+ * Reset a fake port
+ *
+ * This can be called to reset a port from any other state or to reset
+ * it when connecting. In Wireless USB they are different; when doing
+ * a new connect that involves going over the authentication. When
+ * just reseting, its a different story.
+ *
+ * The Linux USB stack resets a port twice before it considers it
+ * enabled, so we have to detect and ignore that.
+ *
+ * @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
+ *
+ * Supposedly we are the only thread accesing @wusbhc->port; in any
+ * case, maybe we should move the mutex locking from
+ * wusbhc_devconnect_auth() to here.
+ *
+ * @port_idx refers to the wusbhc's port index, not the USB port number
+ */
+static int wusbhc_rh_port_reset(struct wusbhc *wusbhc, u8 port_idx)
+{
+	int result = 0;
+	struct wusb_port *port = wusb_port_by_idx(wusbhc, port_idx);
+
+	d_fnstart(3, wusbhc->dev, "(wusbhc %p port_idx %u)\n",
+		  wusbhc, port_idx);
+	if (port->reset_count == 0) {
+		wusbhc_devconnect_auth(wusbhc, port_idx);
+		port->reset_count++;
+	} else if (port->reset_count == 1)
+		/* see header */
+		d_printf(2, wusbhc->dev, "Ignoring second reset on port_idx "
+			"%u\n", port_idx);
+	else
+		result = wusbhc_dev_reset(wusbhc, port_idx);
+	d_fnend(3, wusbhc->dev, "(wusbhc %p port_idx %u) = %d\n",
+		wusbhc, port_idx, result);
+	return result;
+}
+
+/*
+ * Return the hub change status bitmap
+ *
+ * The bits in the change status bitmap are cleared when a
+ * ClearPortFeature request is issued (USB2.0[11.12.3,11.12.4].
+ *
+ * @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
+ *
+ * WARNING!! This gets called from atomic context; we cannot get the
+ *           mutex--the only race condition we can find is some bit
+ *           changing just after we copy it, which shouldn't be too
+ *           big of a problem [and we can't make it an spinlock
+ *           because other parts need to take it and sleep] .
+ *
+ *           @usb_hcd is refcounted, so it won't dissapear under us
+ *           and before killing a host, the polling of the root hub
+ *           would be stopped anyway.
+ */
+int wusbhc_rh_status_data(struct usb_hcd *usb_hcd, char *_buf)
+{
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	size_t cnt, size;
+	unsigned long *buf = (unsigned long *) _buf;
+
+	d_fnstart(1, wusbhc->dev, "(wusbhc %p)\n", wusbhc);
+	/* WE DON'T LOCK, see comment */
+	size = wusbhc->ports_max + 1 /* hub bit */;
+	size = (size + 8 - 1) / 8;	/* round to bytes */
+	for (cnt = 0; cnt < wusbhc->ports_max; cnt++)
+		if (wusb_port_by_idx(wusbhc, cnt)->change)
+			set_bit(cnt + 1, buf);
+		else
+			clear_bit(cnt + 1, buf);
+	d_fnend(1, wusbhc->dev, "(wusbhc %p) %u, buffer:\n", wusbhc, (int)size);
+	d_dump(1, wusbhc->dev, _buf, size);
+	return size;
+}
+EXPORT_SYMBOL_GPL(wusbhc_rh_status_data);
+
+/*
+ * Return the hub's desciptor
+ *
+ * NOTE: almost cut and paste from ehci-hub.c
+ *
+ * @wusbhc is assumed referenced and @wusbhc->mutex unlocked
+ */
+static int wusbhc_rh_get_hub_descr(struct wusbhc *wusbhc, u16 wValue,
+				   u16 wIndex,
+				   struct usb_hub_descriptor *descr,
+				   u16 wLength)
+{
+	u16 temp = 1 + (wusbhc->ports_max / 8);
+	u8 length = 7 + 2 * temp;
+
+	if (wLength < length)
+		return -ENOSPC;
+	descr->bDescLength = 7 + 2 * temp;
+	descr->bDescriptorType = 0x29;	/* HUB type */
+	descr->bNbrPorts = wusbhc->ports_max;
+	descr->wHubCharacteristics = cpu_to_le16(
+		0x00			/* All ports power at once */
+		| 0x00			/* not part of compound device */
+		| 0x10			/* No overcurrent protection */
+		| 0x00			/* 8 FS think time FIXME ?? */
+		| 0x00);		/* No port indicators */
+	descr->bPwrOn2PwrGood = 0;
+	descr->bHubContrCurrent = 0;
+	/* two bitmaps:  ports removable, and usb 1.0 legacy PortPwrCtrlMask */
+	memset(&descr->bitmap[0], 0, temp);
+	memset(&descr->bitmap[temp], 0xff, temp);
+	return 0;
+}
+
+/*
+ * Clear a hub feature
+ *
+ * @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
+ *
+ * Nothing to do, so no locking needed ;)
+ */
+static int wusbhc_rh_clear_hub_feat(struct wusbhc *wusbhc, u16 feature)
+{
+	int result;
+	struct device *dev = wusbhc->dev;
+
+	d_fnstart(4, dev, "(%p, feature 0x%04u)\n", wusbhc, feature);
+	switch (feature) {
+	case C_HUB_LOCAL_POWER:
+		/* FIXME: maybe plug bit 0 to the power input status,
+		 * if any?
+		 * see wusbhc_rh_get_hub_status() */
+	case C_HUB_OVER_CURRENT:
+		result = 0;
+		break;
+	default:
+		result = -EPIPE;
+	}
+	d_fnend(4, dev, "(%p, feature 0x%04u), %d\n", wusbhc, feature, result);
+	return result;
+}
+
+/*
+ * Return hub status (it is always zero...)
+ *
+ * @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
+ *
+ * Nothing to do, so no locking needed ;)
+ */
+static int wusbhc_rh_get_hub_status(struct wusbhc *wusbhc, u32 *buf,
+				    u16 wLength)
+{
+	/* FIXME: maybe plug bit 0 to the power input status (if any)? */
+	*buf = 0;
+	return 0;
+}
+
+/*
+ * Set a port feature
+ *
+ * @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
+ */
+static int wusbhc_rh_set_port_feat(struct wusbhc *wusbhc, u16 feature,
+				   u8 selector, u8 port_idx)
+{
+	int result = -EINVAL;
+	struct device *dev = wusbhc->dev;
+
+	d_fnstart(4, dev, "(feat 0x%04u, selector 0x%u, port_idx %d)\n",
+		  feature, selector, port_idx);
+
+	if (port_idx > wusbhc->ports_max)
+		goto error;
+
+	switch (feature) {
+		/* According to USB2.0[11.24.2.13]p2, these features
+		 * are not required to be implemented. */
+	case USB_PORT_FEAT_C_OVER_CURRENT:
+	case USB_PORT_FEAT_C_ENABLE:
+	case USB_PORT_FEAT_C_SUSPEND:
+	case USB_PORT_FEAT_C_CONNECTION:
+	case USB_PORT_FEAT_C_RESET:
+		result = 0;
+		break;
+
+	case USB_PORT_FEAT_POWER:
+		/* No such thing, but we fake it works */
+		mutex_lock(&wusbhc->mutex);
+		wusb_port_by_idx(wusbhc, port_idx)->status |= USB_PORT_STAT_POWER;
+		mutex_unlock(&wusbhc->mutex);
+		result = 0;
+		break;
+	case USB_PORT_FEAT_RESET:
+		result = wusbhc_rh_port_reset(wusbhc, port_idx);
+		break;
+	case USB_PORT_FEAT_ENABLE:
+	case USB_PORT_FEAT_SUSPEND:
+		dev_err(dev, "(port_idx %d) set feat %d/%d UNIMPLEMENTED\n",
+			port_idx, feature, selector);
+		result = -ENOSYS;
+		break;
+	default:
+		dev_err(dev, "(port_idx %d) set feat %d/%d UNKNOWN\n",
+			port_idx, feature, selector);
+		result = -EPIPE;
+		break;
+	}
+error:
+	d_fnend(4, dev, "(feat 0x%04u, selector 0x%u, port_idx %d) = %d\n",
+		feature, selector, port_idx, result);
+	return result;
+}
+
+/*
+ * Clear a port feature...
+ *
+ * @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
+ */
+static int wusbhc_rh_clear_port_feat(struct wusbhc *wusbhc, u16 feature,
+				     u8 selector, u8 port_idx)
+{
+	int result = -EINVAL;
+	struct device *dev = wusbhc->dev;
+
+	d_fnstart(4, dev, "(wusbhc %p feat 0x%04x selector %d port_idx %d)\n",
+		  wusbhc, feature, selector, port_idx);
+
+	if (port_idx > wusbhc->ports_max)
+		goto error;
+
+	mutex_lock(&wusbhc->mutex);
+	result = 0;
+	switch (feature) {
+	case USB_PORT_FEAT_POWER:	/* fake port always on */
+		/* According to USB2.0[11.24.2.7.1.4], no need to implement? */
+	case USB_PORT_FEAT_C_OVER_CURRENT:
+		break;
+	case USB_PORT_FEAT_C_RESET:
+		wusb_port_by_idx(wusbhc, port_idx)->change &= ~USB_PORT_STAT_C_RESET;
+		break;
+	case USB_PORT_FEAT_C_CONNECTION:
+		wusb_port_by_idx(wusbhc, port_idx)->change &= ~USB_PORT_STAT_C_CONNECTION;
+		break;
+	case USB_PORT_FEAT_ENABLE:
+		__wusbhc_dev_disable(wusbhc, port_idx);
+		break;
+	case USB_PORT_FEAT_C_ENABLE:
+		wusb_port_by_idx(wusbhc, port_idx)->change &= ~USB_PORT_STAT_C_ENABLE;
+		break;
+	case USB_PORT_FEAT_SUSPEND:
+	case USB_PORT_FEAT_C_SUSPEND:
+	case 0xffff:		/* ??? FIXME */
+		dev_err(dev, "(port_idx %d) Clear feat %d/%d UNIMPLEMENTED\n",
+			port_idx, feature, selector);
+		/* dump_stack(); */
+		result = -ENOSYS;
+		break;
+	default:
+		dev_err(dev, "(port_idx %d) Clear feat %d/%d UNKNOWN\n",
+			port_idx, feature, selector);
+		result = -EPIPE;
+		break;
+	}
+	mutex_unlock(&wusbhc->mutex);
+error:
+	d_fnend(4, dev, "(wusbhc %p feat 0x%04x selector %d port_idx %d) = "
+		"%d\n", wusbhc, feature, selector, port_idx, result);
+	return result;
+}
+
+/*
+ * Return the port's status
+ *
+ * @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
+ */
+static int wusbhc_rh_get_port_status(struct wusbhc *wusbhc, u16 port_idx,
+				     u32 *_buf, u16 wLength)
+{
+	int result = -EINVAL;
+	u16 *buf = (u16 *) _buf;
+
+	d_fnstart(1, wusbhc->dev, "(wusbhc %p port_idx %u wLength %u)\n",
+		  wusbhc, port_idx, wLength);
+	if (port_idx > wusbhc->ports_max)
+		goto error;
+	mutex_lock(&wusbhc->mutex);
+	buf[0] = cpu_to_le16(wusb_port_by_idx(wusbhc, port_idx)->status);
+	buf[1] = cpu_to_le16(wusb_port_by_idx(wusbhc, port_idx)->change);
+	result = 0;
+	mutex_unlock(&wusbhc->mutex);
+error:
+	d_fnend(1, wusbhc->dev, "(wusbhc %p) = %d, buffer:\n", wusbhc, result);
+	d_dump(1, wusbhc->dev, _buf, wLength);
+	return result;
+}
+
+/*
+ * Entry point for Root Hub operations
+ *
+ * @wusbhc is assumed referenced and @wusbhc->mutex unlocked.
+ */
+int wusbhc_rh_control(struct usb_hcd *usb_hcd, u16 reqntype, u16 wValue,
+		      u16 wIndex, char *buf, u16 wLength)
+{
+	int result = -ENOSYS;
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+
+	switch (reqntype) {
+	case GetHubDescriptor:
+		result = wusbhc_rh_get_hub_descr(
+			wusbhc, wValue, wIndex,
+			(struct usb_hub_descriptor *) buf, wLength);
+		break;
+	case ClearHubFeature:
+		result = wusbhc_rh_clear_hub_feat(wusbhc, wValue);
+		break;
+	case GetHubStatus:
+		result = wusbhc_rh_get_hub_status(wusbhc, (u32 *)buf, wLength);
+		break;
+
+	case SetPortFeature:
+		result = wusbhc_rh_set_port_feat(wusbhc, wValue, wIndex >> 8,
+						 (wIndex & 0xff) - 1);
+		break;
+	case ClearPortFeature:
+		result = wusbhc_rh_clear_port_feat(wusbhc, wValue, wIndex >> 8,
+						   (wIndex & 0xff) - 1);
+		break;
+	case GetPortStatus:
+		result = wusbhc_rh_get_port_status(wusbhc, wIndex - 1,
+						   (u32 *)buf, wLength);
+		break;
+
+	case SetHubFeature:
+	default:
+		dev_err(wusbhc->dev, "%s (%p [%p], %x, %x, %x, %p, %x) "
+			"UNIMPLEMENTED\n", __func__, usb_hcd, wusbhc, reqntype,
+			wValue, wIndex, buf, wLength);
+		/* dump_stack(); */
+		result = -ENOSYS;
+	}
+	return result;
+}
+EXPORT_SYMBOL_GPL(wusbhc_rh_control);
+
+int wusbhc_rh_suspend(struct usb_hcd *usb_hcd)
+{
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	dev_err(wusbhc->dev, "%s (%p [%p]) UNIMPLEMENTED\n", __func__,
+		usb_hcd, wusbhc);
+	/* dump_stack(); */
+	return -ENOSYS;
+}
+EXPORT_SYMBOL_GPL(wusbhc_rh_suspend);
+
+int wusbhc_rh_resume(struct usb_hcd *usb_hcd)
+{
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	dev_err(wusbhc->dev, "%s (%p [%p]) UNIMPLEMENTED\n", __func__,
+		usb_hcd, wusbhc);
+	/* dump_stack(); */
+	return -ENOSYS;
+}
+EXPORT_SYMBOL_GPL(wusbhc_rh_resume);
+
+int wusbhc_rh_start_port_reset(struct usb_hcd *usb_hcd, unsigned port_idx)
+{
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	dev_err(wusbhc->dev, "%s (%p [%p], port_idx %u) UNIMPLEMENTED\n",
+		__func__, usb_hcd, wusbhc, port_idx);
+	WARN_ON(1);
+	return -ENOSYS;
+}
+EXPORT_SYMBOL_GPL(wusbhc_rh_start_port_reset);
+
+static void wusb_port_init(struct wusb_port *port)
+{
+	port->status |= USB_PORT_STAT_HIGH_SPEED;
+}
+
+/*
+ * Alloc fake port specific fields and status.
+ */
+int wusbhc_rh_create(struct wusbhc *wusbhc)
+{
+	int result = -ENOMEM;
+	size_t port_size, itr;
+	port_size = wusbhc->ports_max * sizeof(wusbhc->port[0]);
+	wusbhc->port = kzalloc(port_size, GFP_KERNEL);
+	if (wusbhc->port == NULL)
+		goto error_port_alloc;
+	for (itr = 0; itr < wusbhc->ports_max; itr++)
+		wusb_port_init(&wusbhc->port[itr]);
+	result = 0;
+error_port_alloc:
+	return result;
+}
+
+void wusbhc_rh_destroy(struct wusbhc *wusbhc)
+{
+	kfree(wusbhc->port);
+}
diff --git a/drivers/usb/wusbcore/security.c b/drivers/usb/wusbcore/security.c
new file mode 100644
index 0000000..a101cad
--- /dev/null
+++ b/drivers/usb/wusbcore/security.c
@@ -0,0 +1,642 @@
+/*
+ * Wireless USB Host Controller
+ * Security support: encryption enablement, etc
+ *
+ * Copyright (C) 2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ */
+#include <linux/types.h>
+#include <linux/usb/ch9.h>
+#include <linux/random.h>
+#include "wusbhc.h"
+
+/*
+ * DEBUG & SECURITY WARNING!!!!
+ *
+ * If you enable this past 1, the debug code will weaken the
+ * cryptographic safety of the system (on purpose, for debugging).
+ *
+ * Weaken means:
+ *   we print secret keys and intermediate values all the way,
+ */
+#undef D_LOCAL
+#define D_LOCAL 2
+#include <linux/uwb/debug.h>
+
+static void wusbhc_set_gtk_callback(struct urb *urb);
+static void wusbhc_gtk_rekey_done_work(struct work_struct *work);
+
+int wusbhc_sec_create(struct wusbhc *wusbhc)
+{
+	wusbhc->gtk.descr.bLength = sizeof(wusbhc->gtk.descr) + sizeof(wusbhc->gtk.data);
+	wusbhc->gtk.descr.bDescriptorType = USB_DT_KEY;
+	wusbhc->gtk.descr.bReserved = 0;
+
+	wusbhc->gtk_index = wusb_key_index(0, WUSB_KEY_INDEX_TYPE_GTK,
+					   WUSB_KEY_INDEX_ORIGINATOR_HOST);
+
+	INIT_WORK(&wusbhc->gtk_rekey_done_work, wusbhc_gtk_rekey_done_work);
+
+	return 0;
+}
+
+
+/* Called when the HC is destroyed */
+void wusbhc_sec_destroy(struct wusbhc *wusbhc)
+{
+}
+
+
+/**
+ * wusbhc_next_tkid - generate a new, currently unused, TKID
+ * @wusbhc:   the WUSB host controller
+ * @wusb_dev: the device whose PTK the TKID is for
+ *            (or NULL for a TKID for a GTK)
+ *
+ * The generated TKID consist of two parts: the device's authenicated
+ * address (or 0 or a GTK); and an incrementing number.  This ensures
+ * that TKIDs cannot be shared between devices and by the time the
+ * incrementing number wraps around the older TKIDs will no longer be
+ * in use (a maximum of two keys may be active at any one time).
+ */
+static u32 wusbhc_next_tkid(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev)
+{
+	u32 *tkid;
+	u32 addr;
+
+	if (wusb_dev == NULL) {
+		tkid = &wusbhc->gtk_tkid;
+		addr = 0;
+	} else {
+		tkid = &wusb_port_by_idx(wusbhc, wusb_dev->port_idx)->ptk_tkid;
+		addr = wusb_dev->addr & 0x7f;
+	}
+
+	*tkid = (addr << 8) | ((*tkid + 1) & 0xff);
+
+	return *tkid;
+}
+
+static void wusbhc_generate_gtk(struct wusbhc *wusbhc)
+{
+	const size_t key_size = sizeof(wusbhc->gtk.data);
+	u32 tkid;
+
+	tkid = wusbhc_next_tkid(wusbhc, NULL);
+
+	wusbhc->gtk.descr.tTKID[0] = (tkid >>  0) & 0xff;
+	wusbhc->gtk.descr.tTKID[1] = (tkid >>  8) & 0xff;
+	wusbhc->gtk.descr.tTKID[2] = (tkid >> 16) & 0xff;
+
+	get_random_bytes(wusbhc->gtk.descr.bKeyData, key_size);
+}
+
+/**
+ * wusbhc_sec_start - start the security management process
+ * @wusbhc: the WUSB host controller
+ *
+ * Generate and set an initial GTK on the host controller.
+ *
+ * Called when the HC is started.
+ */
+int wusbhc_sec_start(struct wusbhc *wusbhc)
+{
+	const size_t key_size = sizeof(wusbhc->gtk.data);
+	int result;
+
+	wusbhc_generate_gtk(wusbhc);
+
+	result = wusbhc->set_gtk(wusbhc, wusbhc->gtk_tkid,
+				 &wusbhc->gtk.descr.bKeyData, key_size);
+	if (result < 0)
+		dev_err(wusbhc->dev, "cannot set GTK for the host: %d\n",
+			result);
+
+	return result;
+}
+
+/**
+ * wusbhc_sec_stop - stop the security management process
+ * @wusbhc: the WUSB host controller
+ *
+ * Wait for any pending GTK rekeys to stop.
+ */
+void wusbhc_sec_stop(struct wusbhc *wusbhc)
+{
+	cancel_work_sync(&wusbhc->gtk_rekey_done_work);
+}
+
+
+/** @returns encryption type name */
+const char *wusb_et_name(u8 x)
+{
+	switch (x) {
+	case USB_ENC_TYPE_UNSECURE:	return "unsecure";
+	case USB_ENC_TYPE_WIRED:	return "wired";
+	case USB_ENC_TYPE_CCM_1:	return "CCM-1";
+	case USB_ENC_TYPE_RSA_1:	return "RSA-1";
+	default: 			return "unknown";
+	}
+}
+EXPORT_SYMBOL_GPL(wusb_et_name);
+
+/*
+ * Set the device encryption method
+ *
+ * We tell the device which encryption method to use; we do this when
+ * setting up the device's security.
+ */
+static int wusb_dev_set_encryption(struct usb_device *usb_dev, int value)
+{
+	int result;
+	struct device *dev = &usb_dev->dev;
+	struct wusb_dev *wusb_dev = usb_dev->wusb_dev;
+
+	if (value) {
+		value = wusb_dev->ccm1_etd.bEncryptionValue;
+	} else {
+		/* FIXME: should be wusb_dev->etd[UNSECURE].bEncryptionValue */
+		value = 0;
+	}
+	/* Set device's */
+	result = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
+			USB_REQ_SET_ENCRYPTION,
+			USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
+			value, 0, NULL, 0, 1000 /* FIXME: arbitrary */);
+	if (result < 0)
+		dev_err(dev, "Can't set device's WUSB encryption to "
+			"%s (value %d): %d\n",
+			wusb_et_name(wusb_dev->ccm1_etd.bEncryptionType),
+			wusb_dev->ccm1_etd.bEncryptionValue,  result);
+	return result;
+}
+
+/*
+ * Set the GTK to be used by a device.
+ *
+ * The device must be authenticated.
+ */
+static int wusb_dev_set_gtk(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev)
+{
+	struct usb_device *usb_dev = wusb_dev->usb_dev;
+
+	return usb_control_msg(
+		usb_dev, usb_sndctrlpipe(usb_dev, 0),
+		USB_REQ_SET_DESCRIPTOR,
+		USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
+		USB_DT_KEY << 8 | wusbhc->gtk_index, 0,
+		&wusbhc->gtk.descr, wusbhc->gtk.descr.bLength,
+		1000);
+}
+
+
+/* FIXME: prototype for adding security */
+int wusb_dev_sec_add(struct wusbhc *wusbhc,
+		     struct usb_device *usb_dev, struct wusb_dev *wusb_dev)
+{
+	int result, bytes, secd_size;
+	struct device *dev = &usb_dev->dev;
+	struct usb_security_descriptor secd;
+	const struct usb_encryption_descriptor *etd, *ccm1_etd = NULL;
+	void *secd_buf;
+	const void *itr, *top;
+	char buf[64];
+
+	d_fnstart(3, dev, "(usb_dev %p, wusb_dev %p)\n", usb_dev, wusb_dev);
+	result = usb_get_descriptor(usb_dev, USB_DT_SECURITY,
+				    0, &secd, sizeof(secd));
+	if (result < sizeof(secd)) {
+		dev_err(dev, "Can't read security descriptor or "
+			"not enough data: %d\n", result);
+		goto error_secd;
+	}
+	secd_size = le16_to_cpu(secd.wTotalLength);
+	d_printf(5, dev, "got %d bytes of sec descriptor, total is %d\n",
+		 result, secd_size);
+	secd_buf = kmalloc(secd_size, GFP_KERNEL);
+	if (secd_buf == NULL) {
+		dev_err(dev, "Can't allocate space for security descriptors\n");
+		goto error_secd_alloc;
+	}
+	result = usb_get_descriptor(usb_dev, USB_DT_SECURITY,
+				    0, secd_buf, secd_size);
+	if (result < secd_size) {
+		dev_err(dev, "Can't read security descriptor or "
+			"not enough data: %d\n", result);
+		goto error_secd_all;
+	}
+	d_printf(5, dev, "got %d bytes of sec descriptors\n", result);
+	bytes = 0;
+	itr = secd_buf + sizeof(secd);
+	top = secd_buf + result;
+	while (itr < top) {
+		etd = itr;
+		if (top - itr < sizeof(*etd)) {
+			dev_err(dev, "BUG: bad device security descriptor; "
+				"not enough data (%zu vs %zu bytes left)\n",
+				top - itr, sizeof(*etd));
+			break;
+		}
+		if (etd->bLength < sizeof(*etd)) {
+			dev_err(dev, "BUG: bad device encryption descriptor; "
+				"descriptor is too short "
+				"(%u vs %zu needed)\n",
+				etd->bLength, sizeof(*etd));
+			break;
+		}
+		itr += etd->bLength;
+		bytes += snprintf(buf + bytes, sizeof(buf) - bytes,
+				  "%s (0x%02x/%02x) ",
+				  wusb_et_name(etd->bEncryptionType),
+				  etd->bEncryptionValue, etd->bAuthKeyIndex);
+		if (etd->bEncryptionType == USB_ENC_TYPE_CCM_1)
+			ccm1_etd = etd;
+	}
+	/* This code only supports CCM1 as of now. */
+	/* FIXME: user has to choose which sec mode to use?
+	 * In theory we want CCM */
+	if (ccm1_etd == NULL) {
+		dev_err(dev, "WUSB device doesn't support CCM1 encryption, "
+			"can't use!\n");
+		result = -EINVAL;
+		goto error_no_ccm1;
+	}
+	wusb_dev->ccm1_etd = *ccm1_etd;
+	dev_info(dev, "supported encryption: %s; using %s (0x%02x/%02x)\n",
+		 buf, wusb_et_name(ccm1_etd->bEncryptionType),
+		 ccm1_etd->bEncryptionValue, ccm1_etd->bAuthKeyIndex);
+	result = 0;
+	kfree(secd_buf);
+out:
+	d_fnend(3, dev, "(usb_dev %p, wusb_dev %p) = %d\n",
+		usb_dev, wusb_dev, result);
+	return result;
+
+
+error_no_ccm1:
+error_secd_all:
+	kfree(secd_buf);
+error_secd_alloc:
+error_secd:
+	goto out;
+}
+
+void wusb_dev_sec_rm(struct wusb_dev *wusb_dev)
+{
+	/* Nothing so far */
+}
+
+static void hs_printk(unsigned level, struct device *dev,
+		      struct usb_handshake *hs)
+{
+	d_printf(level, dev,
+		 "  bMessageNumber: %u\n"
+		 "  bStatus:        %u\n"
+		 "  tTKID:          %02x %02x %02x\n"
+		 "  CDID:           %02x %02x %02x %02x %02x %02x %02x %02x\n"
+		 "                  %02x %02x %02x %02x %02x %02x %02x %02x\n"
+		 "  nonce:          %02x %02x %02x %02x %02x %02x %02x %02x\n"
+		 "                  %02x %02x %02x %02x %02x %02x %02x %02x\n"
+		 "  MIC:            %02x %02x %02x %02x %02x %02x %02x %02x\n",
+		 hs->bMessageNumber, hs->bStatus,
+		 hs->tTKID[2], hs->tTKID[1], hs->tTKID[0],
+		 hs->CDID[0], hs->CDID[1], hs->CDID[2], hs->CDID[3],
+		 hs->CDID[4], hs->CDID[5], hs->CDID[6], hs->CDID[7],
+		 hs->CDID[8], hs->CDID[9], hs->CDID[10], hs->CDID[11],
+		 hs->CDID[12], hs->CDID[13], hs->CDID[14], hs->CDID[15],
+		 hs->nonce[0], hs->nonce[1], hs->nonce[2], hs->nonce[3],
+		 hs->nonce[4], hs->nonce[5], hs->nonce[6], hs->nonce[7],
+		 hs->nonce[8], hs->nonce[9], hs->nonce[10], hs->nonce[11],
+		 hs->nonce[12], hs->nonce[13], hs->nonce[14], hs->nonce[15],
+		 hs->MIC[0], hs->MIC[1], hs->MIC[2], hs->MIC[3],
+		 hs->MIC[4], hs->MIC[5], hs->MIC[6], hs->MIC[7]);
+}
+
+/**
+ * Update the address of an unauthenticated WUSB device
+ *
+ * Once we have successfully authenticated, we take it to addr0 state
+ * and then to a normal address.
+ *
+ * Before the device's address (as known by it) was usb_dev->devnum |
+ * 0x80 (unauthenticated address). With this we update it to usb_dev->devnum.
+ */
+static int wusb_dev_update_address(struct wusbhc *wusbhc,
+				   struct wusb_dev *wusb_dev)
+{
+	int result = -ENOMEM;
+	struct usb_device *usb_dev = wusb_dev->usb_dev;
+	struct device *dev = &usb_dev->dev;
+	u8 new_address = wusb_dev->addr & 0x7F;
+
+	/* Set address 0 */
+	result = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
+				 USB_REQ_SET_ADDRESS, 0,
+				 0, 0, NULL, 0, 1000 /* FIXME: arbitrary */);
+	if (result < 0) {
+		dev_err(dev, "auth failed: can't set address 0: %d\n",
+			result);
+		goto error_addr0;
+	}
+	result = wusb_set_dev_addr(wusbhc, wusb_dev, 0);
+	if (result < 0)
+		goto error_addr0;
+	usb_ep0_reinit(usb_dev);
+
+	/* Set new (authenticated) address. */
+	result = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
+				 USB_REQ_SET_ADDRESS, 0,
+				 new_address, 0, NULL, 0,
+				 1000 /* FIXME: arbitrary */);
+	if (result < 0) {
+		dev_err(dev, "auth failed: can't set address %u: %d\n",
+			new_address, result);
+		goto error_addr;
+	}
+	result = wusb_set_dev_addr(wusbhc, wusb_dev, new_address);
+	if (result < 0)
+		goto error_addr;
+	usb_ep0_reinit(usb_dev);
+	usb_dev->authenticated = 1;
+error_addr:
+error_addr0:
+	return result;
+}
+
+/*
+ *
+ *
+ */
+/* FIXME: split and cleanup */
+int wusb_dev_4way_handshake(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev,
+			    struct wusb_ckhdid *ck)
+{
+	int result = -ENOMEM;
+	struct usb_device *usb_dev = wusb_dev->usb_dev;
+	struct device *dev = &usb_dev->dev;
+	u32 tkid;
+	__le32 tkid_le;
+	struct usb_handshake *hs;
+	struct aes_ccm_nonce ccm_n;
+	u8 mic[8];
+	struct wusb_keydvt_in keydvt_in;
+	struct wusb_keydvt_out keydvt_out;
+
+	hs = kzalloc(3*sizeof(hs[0]), GFP_KERNEL);
+	if (hs == NULL) {
+		dev_err(dev, "can't allocate handshake data\n");
+		goto error_kzalloc;
+	}
+
+	/* We need to turn encryption before beginning the 4way
+	 * hshake (WUSB1.0[.3.2.2]) */
+	result = wusb_dev_set_encryption(usb_dev, 1);
+	if (result < 0)
+		goto error_dev_set_encryption;
+
+	tkid = wusbhc_next_tkid(wusbhc, wusb_dev);
+	tkid_le = cpu_to_le32(tkid);
+
+	hs[0].bMessageNumber = 1;
+	hs[0].bStatus = 0;
+	memcpy(hs[0].tTKID, &tkid_le, sizeof(hs[0].tTKID));
+	hs[0].bReserved = 0;
+	memcpy(hs[0].CDID, &wusb_dev->cdid, sizeof(hs[0].CDID));
+	get_random_bytes(&hs[0].nonce, sizeof(hs[0].nonce));
+	memset(hs[0].MIC, 0, sizeof(hs[0].MIC));	/* Per WUSB1.0[T7-22] */
+
+	d_printf(1, dev, "I: sending hs1:\n");
+	hs_printk(2, dev, &hs[0]);
+
+	result = usb_control_msg(
+		usb_dev, usb_sndctrlpipe(usb_dev, 0),
+		USB_REQ_SET_HANDSHAKE,
+		USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
+		1, 0, &hs[0], sizeof(hs[0]), 1000 /* FIXME: arbitrary */);
+	if (result < 0) {
+		dev_err(dev, "Handshake1: request failed: %d\n", result);
+		goto error_hs1;
+	}
+
+	/* Handshake 2, from the device -- need to verify fields */
+	result = usb_control_msg(
+		usb_dev, usb_rcvctrlpipe(usb_dev, 0),
+		USB_REQ_GET_HANDSHAKE,
+		USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
+		2, 0, &hs[1], sizeof(hs[1]), 1000 /* FIXME: arbitrary */);
+	if (result < 0) {
+		dev_err(dev, "Handshake2: request failed: %d\n", result);
+		goto error_hs2;
+	}
+	d_printf(1, dev, "got HS2:\n");
+	hs_printk(2, dev, &hs[1]);
+
+	result = -EINVAL;
+	if (hs[1].bMessageNumber != 2) {
+		dev_err(dev, "Handshake2 failed: bad message number %u\n",
+			hs[1].bMessageNumber);
+		goto error_hs2;
+	}
+	if (hs[1].bStatus != 0) {
+		dev_err(dev, "Handshake2 failed: bad status %u\n",
+			hs[1].bStatus);
+		goto error_hs2;
+	}
+	if (memcmp(hs[0].tTKID, hs[1].tTKID, sizeof(hs[0].tTKID))) {
+		dev_err(dev, "Handshake2 failed: TKID mismatch "
+			"(#1 0x%02x%02x%02x vs #2 0x%02x%02x%02x)\n",
+			hs[0].tTKID[0], hs[0].tTKID[1], hs[0].tTKID[2],
+			hs[1].tTKID[0], hs[1].tTKID[1], hs[1].tTKID[2]);
+		goto error_hs2;
+	}
+	if (memcmp(hs[0].CDID, hs[1].CDID, sizeof(hs[0].CDID))) {
+		dev_err(dev, "Handshake2 failed: CDID mismatch\n");
+		goto error_hs2;
+	}
+
+	/* Setup the CCM nonce */
+	memset(&ccm_n.sfn, 0, sizeof(ccm_n.sfn));	/* Per WUSB1.0[6.5.2] */
+	memcpy(ccm_n.tkid, &tkid_le, sizeof(ccm_n.tkid));
+	ccm_n.src_addr = wusbhc->uwb_rc->uwb_dev.dev_addr;
+	ccm_n.dest_addr.data[0] = wusb_dev->addr;
+	ccm_n.dest_addr.data[1] = 0;
+
+	/* Derive the KCK and PTK from CK, the CCM, H and D nonces */
+	memcpy(keydvt_in.hnonce, hs[0].nonce, sizeof(keydvt_in.hnonce));
+	memcpy(keydvt_in.dnonce, hs[1].nonce, sizeof(keydvt_in.dnonce));
+	result = wusb_key_derive(&keydvt_out, ck->data, &ccm_n, &keydvt_in);
+	if (result < 0) {
+		dev_err(dev, "Handshake2 failed: cannot derive keys: %d\n",
+			result);
+		goto error_hs2;
+	}
+	d_printf(2, dev, "KCK:\n");
+	d_dump(2, dev, keydvt_out.kck, sizeof(keydvt_out.kck));
+	d_printf(2, dev, "PTK:\n");
+	d_dump(2, dev, keydvt_out.ptk, sizeof(keydvt_out.ptk));
+
+	/* Compute MIC and verify it */
+	result = wusb_oob_mic(mic, keydvt_out.kck, &ccm_n, &hs[1]);
+	if (result < 0) {
+		dev_err(dev, "Handshake2 failed: cannot compute MIC: %d\n",
+			result);
+		goto error_hs2;
+	}
+
+	d_printf(2, dev, "MIC:\n");
+	d_dump(2, dev, mic, sizeof(mic));
+	if (memcmp(hs[1].MIC, mic, sizeof(hs[1].MIC))) {
+		dev_err(dev, "Handshake2 failed: MIC mismatch\n");
+		goto error_hs2;
+	}
+
+	/* Send Handshake3 */
+	hs[2].bMessageNumber = 3;
+	hs[2].bStatus = 0;
+	memcpy(hs[2].tTKID, &tkid_le, sizeof(hs[2].tTKID));
+	hs[2].bReserved = 0;
+	memcpy(hs[2].CDID, &wusb_dev->cdid, sizeof(hs[2].CDID));
+	memcpy(hs[2].nonce, hs[0].nonce, sizeof(hs[2].nonce));
+	result = wusb_oob_mic(hs[2].MIC, keydvt_out.kck, &ccm_n, &hs[2]);
+	if (result < 0) {
+		dev_err(dev, "Handshake3 failed: cannot compute MIC: %d\n",
+			result);
+		goto error_hs2;
+	}
+
+	d_printf(1, dev, "I: sending hs3:\n");
+	hs_printk(2, dev, &hs[2]);
+
+	result = usb_control_msg(
+		usb_dev, usb_sndctrlpipe(usb_dev, 0),
+		USB_REQ_SET_HANDSHAKE,
+		USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
+		3, 0, &hs[2], sizeof(hs[2]), 1000 /* FIXME: arbitrary */);
+	if (result < 0) {
+		dev_err(dev, "Handshake3: request failed: %d\n", result);
+		goto error_hs3;
+	}
+
+	d_printf(1, dev, "I: turning on encryption on host for device\n");
+	d_dump(2, dev, keydvt_out.ptk, sizeof(keydvt_out.ptk));
+	result = wusbhc->set_ptk(wusbhc, wusb_dev->port_idx, tkid,
+				 keydvt_out.ptk, sizeof(keydvt_out.ptk));
+	if (result < 0)
+		goto error_wusbhc_set_ptk;
+
+	d_printf(1, dev, "I: setting a GTK\n");
+	result = wusb_dev_set_gtk(wusbhc, wusb_dev);
+	if (result < 0) {
+		dev_err(dev, "Set GTK for device: request failed: %d\n",
+			result);
+		goto error_wusbhc_set_gtk;
+	}
+
+	/* Update the device's address from unauth to auth */
+	if (usb_dev->authenticated == 0) {
+		d_printf(1, dev, "I: updating addres to auth from non-auth\n");
+		result = wusb_dev_update_address(wusbhc, wusb_dev);
+		if (result < 0)
+			goto error_dev_update_address;
+	}
+	result = 0;
+	d_printf(1, dev, "I: 4way handshke done, device authenticated\n");
+
+error_dev_update_address:
+error_wusbhc_set_gtk:
+error_wusbhc_set_ptk:
+error_hs3:
+error_hs2:
+error_hs1:
+	memset(hs, 0, 3*sizeof(hs[0]));
+	memset(&keydvt_out, 0, sizeof(keydvt_out));
+	memset(&keydvt_in, 0, sizeof(keydvt_in));
+	memset(&ccm_n, 0, sizeof(ccm_n));
+	memset(mic, 0, sizeof(mic));
+	if (result < 0) {
+		/* error path */
+		wusb_dev_set_encryption(usb_dev, 0);
+	}
+error_dev_set_encryption:
+	kfree(hs);
+error_kzalloc:
+	return result;
+}
+
+/*
+ * Once all connected and authenticated devices have received the new
+ * GTK, switch the host to using it.
+ */
+static void wusbhc_gtk_rekey_done_work(struct work_struct *work)
+{
+	struct wusbhc *wusbhc = container_of(work, struct wusbhc, gtk_rekey_done_work);
+	size_t key_size = sizeof(wusbhc->gtk.data);
+
+	mutex_lock(&wusbhc->mutex);
+
+	if (--wusbhc->pending_set_gtks == 0)
+		wusbhc->set_gtk(wusbhc, wusbhc->gtk_tkid, &wusbhc->gtk.descr.bKeyData, key_size);
+
+	mutex_unlock(&wusbhc->mutex);
+}
+
+static void wusbhc_set_gtk_callback(struct urb *urb)
+{
+	struct wusbhc *wusbhc = urb->context;
+
+	queue_work(wusbd, &wusbhc->gtk_rekey_done_work);
+}
+
+/**
+ * wusbhc_gtk_rekey - generate and distribute a new GTK
+ * @wusbhc: the WUSB host controller
+ *
+ * Generate a new GTK and distribute it to all connected and
+ * authenticated devices.  When all devices have the new GTK, the host
+ * starts using it.
+ *
+ * This must be called after every device disconnect (see [WUSB]
+ * section 6.2.11.2).
+ */
+void wusbhc_gtk_rekey(struct wusbhc *wusbhc)
+{
+	static const size_t key_size = sizeof(wusbhc->gtk.data);
+	int p;
+
+	wusbhc_generate_gtk(wusbhc);
+
+	for (p = 0; p < wusbhc->ports_max; p++) {
+		struct wusb_dev *wusb_dev;
+
+		wusb_dev = wusbhc->port[p].wusb_dev;
+		if (!wusb_dev || !wusb_dev->usb_dev | !wusb_dev->usb_dev->authenticated)
+			continue;
+
+		usb_fill_control_urb(wusb_dev->set_gtk_urb, wusb_dev->usb_dev,
+				     usb_sndctrlpipe(wusb_dev->usb_dev, 0),
+				     (void *)wusb_dev->set_gtk_req,
+				     &wusbhc->gtk.descr, wusbhc->gtk.descr.bLength,
+				     wusbhc_set_gtk_callback, wusbhc);
+		if (usb_submit_urb(wusb_dev->set_gtk_urb, GFP_KERNEL) == 0)
+			wusbhc->pending_set_gtks++;
+	}
+	if (wusbhc->pending_set_gtks == 0)
+		wusbhc->set_gtk(wusbhc, wusbhc->gtk_tkid, &wusbhc->gtk.descr.bKeyData, key_size);
+}
diff --git a/drivers/usb/wusbcore/wa-hc.c b/drivers/usb/wusbcore/wa-hc.c
new file mode 100644
index 0000000..9d04722
--- /dev/null
+++ b/drivers/usb/wusbcore/wa-hc.c
@@ -0,0 +1,95 @@
+/*
+ * Wire Adapter Host Controller Driver
+ * Common items to HWA and DWA based HCDs
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ */
+#include "wusbhc.h"
+#include "wa-hc.h"
+
+/**
+ * Assumes
+ *
+ * wa->usb_dev and wa->usb_iface initialized and refcounted,
+ * wa->wa_descr initialized.
+ */
+int wa_create(struct wahc *wa, struct usb_interface *iface)
+{
+	int result;
+	struct device *dev = &iface->dev;
+
+	result = wa_rpipes_create(wa);
+	if (result < 0)
+		goto error_rpipes_create;
+	/* Fill up Data Transfer EP pointers */
+	wa->dti_epd = &iface->cur_altsetting->endpoint[1].desc;
+	wa->dto_epd = &iface->cur_altsetting->endpoint[2].desc;
+	wa->xfer_result_size = le16_to_cpu(wa->dti_epd->wMaxPacketSize);
+	wa->xfer_result = kmalloc(wa->xfer_result_size, GFP_KERNEL);
+	if (wa->xfer_result == NULL)
+		goto error_xfer_result_alloc;
+	result = wa_nep_create(wa, iface);
+	if (result < 0) {
+		dev_err(dev, "WA-CDS: can't initialize notif endpoint: %d\n",
+			result);
+		goto error_nep_create;
+	}
+	return 0;
+
+error_nep_create:
+	kfree(wa->xfer_result);
+error_xfer_result_alloc:
+	wa_rpipes_destroy(wa);
+error_rpipes_create:
+	return result;
+}
+EXPORT_SYMBOL_GPL(wa_create);
+
+
+void __wa_destroy(struct wahc *wa)
+{
+	if (wa->dti_urb) {
+		usb_kill_urb(wa->dti_urb);
+		usb_put_urb(wa->dti_urb);
+		usb_kill_urb(wa->buf_in_urb);
+		usb_put_urb(wa->buf_in_urb);
+	}
+	kfree(wa->xfer_result);
+	wa_nep_destroy(wa);
+	wa_rpipes_destroy(wa);
+}
+EXPORT_SYMBOL_GPL(__wa_destroy);
+
+/**
+ * wa_reset_all - reset the WA device
+ * @wa: the WA to be reset
+ *
+ * For HWAs the radio controller and all other PALs are also reset.
+ */
+void wa_reset_all(struct wahc *wa)
+{
+	/* FIXME: assuming HWA. */
+	wusbhc_reset_all(wa->wusb);
+}
+
+MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>");
+MODULE_DESCRIPTION("Wireless USB Wire Adapter core");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/wusbcore/wa-hc.h b/drivers/usb/wusbcore/wa-hc.h
new file mode 100644
index 0000000..586d350
--- /dev/null
+++ b/drivers/usb/wusbcore/wa-hc.h
@@ -0,0 +1,417 @@
+/*
+ * HWA Host Controller Driver
+ * Wire Adapter Control/Data Streaming Iface (WUSB1.0[8])
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * This driver implements a USB Host Controller (struct usb_hcd) for a
+ * Wireless USB Host Controller based on the Wireless USB 1.0
+ * Host-Wire-Adapter specification (in layman terms, a USB-dongle that
+ * implements a Wireless USB host).
+ *
+ * Check out the Design-overview.txt file in the source documentation
+ * for other details on the implementation.
+ *
+ * Main blocks:
+ *
+ *  driver     glue with the driver API, workqueue daemon
+ *
+ *  lc         RC instance life cycle management (create, destroy...)
+ *
+ *  hcd        glue with the USB API Host Controller Interface API.
+ *
+ *  nep        Notification EndPoint managent: collect notifications
+ *             and queue them with the workqueue daemon.
+ *
+ *             Handle notifications as coming from the NEP. Sends them
+ *             off others to their respective modules (eg: connect,
+ *             disconnect and reset go to devconnect).
+ *
+ *  rpipe      Remote Pipe management; rpipe is what we use to write
+ *             to an endpoint on a WUSB device that is connected to a
+ *             HWA RC.
+ *
+ *  xfer       Transfer managment -- this is all the code that gets a
+ *             buffer and pushes it to a device (or viceversa). *
+ *
+ * Some day a lot of this code will be shared between this driver and
+ * the drivers for DWA (xfer, rpipe).
+ *
+ * All starts at driver.c:hwahc_probe(), when one of this guys is
+ * connected. hwahc_disconnect() stops it.
+ *
+ * During operation, the main driver is devices connecting or
+ * disconnecting. They cause the HWA RC to send notifications into
+ * nep.c:hwahc_nep_cb() that will dispatch them to
+ * notif.c:wa_notif_dispatch(). From there they will fan to cause
+ * device connects, disconnects, etc.
+ *
+ * Note much of the activity is difficult to follow. For example a
+ * device connect goes to devconnect, which will cause the "fake" root
+ * hub port to show a connect and stop there. Then khubd will notice
+ * and call into the rh.c:hwahc_rc_port_reset() code to authenticate
+ * the device (and this might require user intervention) and enable
+ * the port.
+ *
+ * We also have a timer workqueue going from devconnect.c that
+ * schedules in hwahc_devconnect_create().
+ *
+ * The rest of the traffic is in the usual entry points of a USB HCD,
+ * which are hooked up in driver.c:hwahc_rc_driver, and defined in
+ * hcd.c.
+ */
+
+#ifndef __HWAHC_INTERNAL_H__
+#define __HWAHC_INTERNAL_H__
+
+#include <linux/completion.h>
+#include <linux/usb.h>
+#include <linux/mutex.h>
+#include <linux/spinlock.h>
+#include <linux/uwb.h>
+#include <linux/usb/wusb.h>
+#include <linux/usb/wusb-wa.h>
+
+struct wusbhc;
+struct wahc;
+extern void wa_urb_enqueue_run(struct work_struct *ws);
+
+/**
+ * RPipe instance
+ *
+ * @descr's fields are kept in LE, as we need to send it back and
+ * forth.
+ *
+ * @wa is referenced when set
+ *
+ * @segs_available is the number of requests segments that still can
+ *                 be submitted to the controller without overloading
+ *                 it. It is initialized to descr->wRequests when
+ *                 aiming.
+ *
+ * A rpipe supports a max of descr->wRequests at the same time; before
+ * submitting seg_lock has to be taken. If segs_avail > 0, then we can
+ * submit; if not, we have to queue them.
+ */
+struct wa_rpipe {
+	struct kref refcnt;
+	struct usb_rpipe_descriptor descr;
+	struct usb_host_endpoint *ep;
+	struct wahc *wa;
+	spinlock_t seg_lock;
+	struct list_head seg_list;
+	atomic_t segs_available;
+	u8 buffer[1];	/* For reads/writes on USB */
+};
+
+
+/**
+ * Instance of a HWA Host Controller
+ *
+ * Except where a more specific lock/mutex applies or atomic, all
+ * fields protected by @mutex.
+ *
+ * @wa_descr  Can be accessed without locking because it is in
+ *            the same area where the device descriptors were
+ *            read, so it is guaranteed to exist umodified while
+ *            the device exists.
+ *
+ *            Endianess has been converted to CPU's.
+ *
+ * @nep_* can be accessed without locking as its processing is
+ *        serialized; we submit a NEP URB and it comes to
+ *        hwahc_nep_cb(), which won't issue another URB until it is
+ *        done processing it.
+ *
+ * @xfer_list:
+ *
+ *   List of active transfers to verify existence from a xfer id
+ *   gotten from the xfer result message. Can't use urb->list because
+ *   it goes by endpoint, and we don't know the endpoint at the time
+ *   when we get the xfer result message. We can't really rely on the
+ *   pointer (will have to change for 64 bits) as the xfer id is 32 bits.
+ *
+ * @xfer_delayed_list:   List of transfers that need to be started
+ *                       (with a workqueue, because they were
+ *                       submitted from an atomic context).
+ *
+ * FIXME: this needs to be layered up: a wusbhc layer (for sharing
+ *        comonalities with WHCI), a wa layer (for sharing
+ *        comonalities with DWA-RC).
+ */
+struct wahc {
+	struct usb_device *usb_dev;
+	struct usb_interface *usb_iface;
+
+	/* HC to deliver notifications */
+	union {
+		struct wusbhc *wusb;
+		struct dwahc *dwa;
+	};
+
+	const struct usb_endpoint_descriptor *dto_epd, *dti_epd;
+	const struct usb_wa_descriptor *wa_descr;
+
+	struct urb *nep_urb;		/* Notification EndPoint [lockless] */
+	struct edc nep_edc;
+	void *nep_buffer;
+	size_t nep_buffer_size;
+
+	atomic_t notifs_queued;
+
+	u16 rpipes;
+	unsigned long *rpipe_bm;	/* rpipe usage bitmap */
+	spinlock_t rpipe_bm_lock;	/* protect rpipe_bm */
+	struct mutex rpipe_mutex;	/* assigning resources to endpoints */
+
+	struct urb *dti_urb;		/* URB for reading xfer results */
+	struct urb *buf_in_urb;		/* URB for reading data in */
+	struct edc dti_edc;		/* DTI error density counter */
+	struct wa_xfer_result *xfer_result; /* real size = dti_ep maxpktsize */
+	size_t xfer_result_size;
+
+	s32 status;			/* For reading status */
+
+	struct list_head xfer_list;
+	struct list_head xfer_delayed_list;
+	spinlock_t xfer_list_lock;
+	struct work_struct xfer_work;
+	atomic_t xfer_id_count;
+};
+
+
+extern int wa_create(struct wahc *wa, struct usb_interface *iface);
+extern void __wa_destroy(struct wahc *wa);
+void wa_reset_all(struct wahc *wa);
+
+
+/* Miscellaneous constants */
+enum {
+	/** Max number of EPROTO errors we tolerate on the NEP in a
+	 * period of time */
+	HWAHC_EPROTO_MAX = 16,
+	/** Period of time for EPROTO errors (in jiffies) */
+	HWAHC_EPROTO_PERIOD = 4 * HZ,
+};
+
+
+/* Notification endpoint handling */
+extern int wa_nep_create(struct wahc *, struct usb_interface *);
+extern void wa_nep_destroy(struct wahc *);
+
+static inline int wa_nep_arm(struct wahc *wa, gfp_t gfp_mask)
+{
+	struct urb *urb = wa->nep_urb;
+	urb->transfer_buffer = wa->nep_buffer;
+	urb->transfer_buffer_length = wa->nep_buffer_size;
+	return usb_submit_urb(urb, gfp_mask);
+}
+
+static inline void wa_nep_disarm(struct wahc *wa)
+{
+	usb_kill_urb(wa->nep_urb);
+}
+
+
+/* RPipes */
+static inline void wa_rpipe_init(struct wahc *wa)
+{
+	spin_lock_init(&wa->rpipe_bm_lock);
+	mutex_init(&wa->rpipe_mutex);
+}
+
+static inline void wa_init(struct wahc *wa)
+{
+	edc_init(&wa->nep_edc);
+	atomic_set(&wa->notifs_queued, 0);
+	wa_rpipe_init(wa);
+	edc_init(&wa->dti_edc);
+	INIT_LIST_HEAD(&wa->xfer_list);
+	INIT_LIST_HEAD(&wa->xfer_delayed_list);
+	spin_lock_init(&wa->xfer_list_lock);
+	INIT_WORK(&wa->xfer_work, wa_urb_enqueue_run);
+	atomic_set(&wa->xfer_id_count, 1);
+}
+
+/**
+ * Destroy a pipe (when refcount drops to zero)
+ *
+ * Assumes it has been moved to the "QUIESCING" state.
+ */
+struct wa_xfer;
+extern void rpipe_destroy(struct kref *_rpipe);
+static inline
+void __rpipe_get(struct wa_rpipe *rpipe)
+{
+	kref_get(&rpipe->refcnt);
+}
+extern int rpipe_get_by_ep(struct wahc *, struct usb_host_endpoint *,
+			   struct urb *, gfp_t);
+static inline void rpipe_put(struct wa_rpipe *rpipe)
+{
+	kref_put(&rpipe->refcnt, rpipe_destroy);
+
+}
+extern void rpipe_ep_disable(struct wahc *, struct usb_host_endpoint *);
+extern int wa_rpipes_create(struct wahc *);
+extern void wa_rpipes_destroy(struct wahc *);
+static inline void rpipe_avail_dec(struct wa_rpipe *rpipe)
+{
+	atomic_dec(&rpipe->segs_available);
+}
+
+/**
+ * Returns true if the rpipe is ready to submit more segments.
+ */
+static inline int rpipe_avail_inc(struct wa_rpipe *rpipe)
+{
+	return atomic_inc_return(&rpipe->segs_available) > 0
+		&& !list_empty(&rpipe->seg_list);
+}
+
+
+/* Transferring data */
+extern int wa_urb_enqueue(struct wahc *, struct usb_host_endpoint *,
+			  struct urb *, gfp_t);
+extern int wa_urb_dequeue(struct wahc *, struct urb *);
+extern void wa_handle_notif_xfer(struct wahc *, struct wa_notif_hdr *);
+
+
+/* Misc
+ *
+ * FIXME: Refcounting for the actual @hwahc object is not correct; I
+ *        mean, this should be refcounting on the HCD underneath, but
+ *        it is not. In any case, the semantics for HCD refcounting
+ *        are *weird*...on refcount reaching zero it just frees
+ *        it...no RC specific function is called...unless I miss
+ *        something.
+ *
+ * FIXME: has to go away in favour of an 'struct' hcd based sollution
+ */
+static inline struct wahc *wa_get(struct wahc *wa)
+{
+	usb_get_intf(wa->usb_iface);
+	return wa;
+}
+
+static inline void wa_put(struct wahc *wa)
+{
+	usb_put_intf(wa->usb_iface);
+}
+
+
+static inline int __wa_feature(struct wahc *wa, unsigned op, u16 feature)
+{
+	return usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
+			op ? USB_REQ_SET_FEATURE : USB_REQ_CLEAR_FEATURE,
+			USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+			feature,
+			wa->usb_iface->cur_altsetting->desc.bInterfaceNumber,
+			NULL, 0, 1000 /* FIXME: arbitrary */);
+}
+
+
+static inline int __wa_set_feature(struct wahc *wa, u16 feature)
+{
+	return  __wa_feature(wa, 1, feature);
+}
+
+
+static inline int __wa_clear_feature(struct wahc *wa, u16 feature)
+{
+	return __wa_feature(wa, 0, feature);
+}
+
+
+/**
+ * Return the status of a Wire Adapter
+ *
+ * @wa:		Wire Adapter instance
+ * @returns     < 0 errno code on error, or status bitmap as described
+ *              in WUSB1.0[8.3.1.6].
+ *
+ * NOTE: need malloc, some arches don't take USB from the stack
+ */
+static inline
+s32 __wa_get_status(struct wahc *wa)
+{
+	s32 result;
+	result = usb_control_msg(
+		wa->usb_dev, usb_rcvctrlpipe(wa->usb_dev, 0),
+		USB_REQ_GET_STATUS,
+		USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+		0, wa->usb_iface->cur_altsetting->desc.bInterfaceNumber,
+		&wa->status, sizeof(wa->status),
+		1000 /* FIXME: arbitrary */);
+	if (result >= 0)
+		result = wa->status;
+	return result;
+}
+
+
+/**
+ * Waits until the Wire Adapter's status matches @mask/@value
+ *
+ * @wa:		Wire Adapter instance.
+ * @returns     < 0 errno code on error, otherwise status.
+ *
+ * Loop until the WAs status matches the mask and value (status & mask
+ * == value). Timeout if it doesn't happen.
+ *
+ * FIXME: is there an official specification on how long status
+ *        changes can take?
+ */
+static inline s32 __wa_wait_status(struct wahc *wa, u32 mask, u32 value)
+{
+	s32 result;
+	unsigned loops = 10;
+	do {
+		msleep(50);
+		result = __wa_get_status(wa);
+		if ((result & mask) == value)
+			break;
+		if (loops-- == 0) {
+			result = -ETIMEDOUT;
+			break;
+		}
+	} while (result >= 0);
+	return result;
+}
+
+
+/** Command @hwahc to stop, @returns 0 if ok, < 0 errno code on error */
+static inline int __wa_stop(struct wahc *wa)
+{
+	int result;
+	struct device *dev = &wa->usb_iface->dev;
+
+	result = __wa_clear_feature(wa, WA_ENABLE);
+	if (result < 0 && result != -ENODEV) {
+		dev_err(dev, "error commanding HC to stop: %d\n", result);
+		goto out;
+	}
+	result = __wa_wait_status(wa, WA_ENABLE, 0);
+	if (result < 0 && result != -ENODEV)
+		dev_err(dev, "error waiting for HC to stop: %d\n", result);
+out:
+	return 0;
+}
+
+
+#endif /* #ifndef __HWAHC_INTERNAL_H__ */
diff --git a/drivers/usb/wusbcore/wa-nep.c b/drivers/usb/wusbcore/wa-nep.c
new file mode 100644
index 0000000..3f54299
--- /dev/null
+++ b/drivers/usb/wusbcore/wa-nep.c
@@ -0,0 +1,310 @@
+/*
+ * WUSB Wire Adapter: Control/Data Streaming Interface (WUSB[8])
+ * Notification EndPoint support
+ *
+ * Copyright (C) 2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * This part takes care of getting the notification from the hw
+ * only and dispatching through wusbwad into
+ * wa_notif_dispatch. Handling is done there.
+ *
+ * WA notifications are limited in size; most of them are three or
+ * four bytes long, and the longest is the HWA Device Notification,
+ * which would not exceed 38 bytes (DNs are limited in payload to 32
+ * bytes plus 3 bytes header (WUSB1.0[7.6p2]), plus 3 bytes HWA
+ * header (WUSB1.0[8.5.4.2]).
+ *
+ * It is not clear if more than one Device Notification can be packed
+ * in a HWA Notification, I assume no because of the wording in
+ * WUSB1.0[8.5.4.2]. In any case, the bigger any notification could
+ * get is 256 bytes (as the bLength field is a byte).
+ *
+ * So what we do is we have this buffer and read into it; when a
+ * notification arrives we schedule work to a specific, single thread
+ * workqueue (so notifications are serialized) and copy the
+ * notification data. After scheduling the work, we rearm the read from
+ * the notification endpoint.
+ *
+ * Entry points here are:
+ *
+ * wa_nep_[create|destroy]()   To initialize/release this subsystem
+ *
+ * wa_nep_cb()                 Callback for the notification
+ *                                endpoint; when data is ready, this
+ *                                does the dispatching.
+ */
+#include <linux/workqueue.h>
+#include <linux/ctype.h>
+#include <linux/uwb/debug.h>
+#include "wa-hc.h"
+#include "wusbhc.h"
+
+/* Structure for queueing notifications to the workqueue */
+struct wa_notif_work {
+	struct work_struct work;
+	struct wahc *wa;
+	size_t size;
+	u8 data[];
+};
+
+/*
+ * Process incoming notifications from the WA's Notification EndPoint
+ * [the wuswad daemon, basically]
+ *
+ * @_nw:	Pointer to a descriptor which has the pointer to the
+ * 		@wa, the size of the buffer and the work queue
+ * 		structure (so we can free all when done).
+ * @returns     0 if ok, < 0 errno code on error.
+ *
+ * All notifications follow the same format; they need to start with a
+ * 'struct wa_notif_hdr' header, so it is easy to parse through
+ * them. We just break the buffer in individual notifications (the
+ * standard doesn't say if it can be done or is forbidden, so we are
+ * cautious) and dispatch each.
+ *
+ * So the handling layers are is:
+ *
+ *   WA specific notification (from NEP)
+ *      Device Notification Received -> wa_handle_notif_dn()
+ *        WUSB Device notification generic handling
+ *      BPST Adjustment -> wa_handle_notif_bpst_adj()
+ *      ... -> ...
+ *
+ * @wa has to be referenced
+ */
+static void wa_notif_dispatch(struct work_struct *ws)
+{
+	void *itr;
+	u8 missing = 0;
+	struct wa_notif_work *nw = container_of(ws, struct wa_notif_work, work);
+	struct wahc *wa = nw->wa;
+	struct wa_notif_hdr *notif_hdr;
+	size_t size;
+
+	struct device *dev = &wa->usb_iface->dev;
+
+#if 0
+	/* FIXME: need to check for this??? */
+	if (usb_hcd->state == HC_STATE_QUIESCING)	/* Going down? */
+		goto out;				/* screw it */
+#endif
+	atomic_dec(&wa->notifs_queued);		/* Throttling ctl */
+	dev = &wa->usb_iface->dev;
+	size = nw->size;
+	itr = nw->data;
+
+	while (size) {
+		if (size < sizeof(*notif_hdr)) {
+			missing = sizeof(*notif_hdr) - size;
+			goto exhausted_buffer;
+		}
+		notif_hdr = itr;
+		if (size < notif_hdr->bLength)
+			goto exhausted_buffer;
+		itr += notif_hdr->bLength;
+		size -= notif_hdr->bLength;
+		/* Dispatch the notification [don't use itr or size!] */
+		switch (notif_hdr->bNotifyType) {
+		case HWA_NOTIF_DN: {
+			struct hwa_notif_dn *hwa_dn;
+			hwa_dn = container_of(notif_hdr, struct hwa_notif_dn,
+					      hdr);
+			wusbhc_handle_dn(wa->wusb, hwa_dn->bSourceDeviceAddr,
+					 hwa_dn->dndata,
+					 notif_hdr->bLength - sizeof(*hwa_dn));
+			break;
+		}
+		case WA_NOTIF_TRANSFER:
+			wa_handle_notif_xfer(wa, notif_hdr);
+			break;
+		case DWA_NOTIF_RWAKE:
+		case DWA_NOTIF_PORTSTATUS:
+		case HWA_NOTIF_BPST_ADJ:
+			/* FIXME: unimplemented WA NOTIFs */
+			/* fallthru */
+		default:
+			if (printk_ratelimit()) {
+				dev_err(dev, "HWA: unknown notification 0x%x, "
+					"%zu bytes; discarding\n",
+					notif_hdr->bNotifyType,
+					(size_t)notif_hdr->bLength);
+				dump_bytes(dev, notif_hdr, 16);
+			}
+			break;
+		}
+	}
+out:
+	wa_put(wa);
+	kfree(nw);
+	return;
+
+	/* THIS SHOULD NOT HAPPEN
+	 *
+	 * Buffer exahusted with partial data remaining; just warn and
+	 * discard the data, as this should not happen.
+	 */
+exhausted_buffer:
+	if (!printk_ratelimit())
+		goto out;
+	dev_warn(dev, "HWA: device sent short notification, "
+		 "%d bytes missing; discarding %d bytes.\n",
+		 missing, (int)size);
+	dump_bytes(dev, itr, size);
+	goto out;
+}
+
+/*
+ * Deliver incoming WA notifications to the wusbwa workqueue
+ *
+ * @wa:	Pointer the Wire Adapter Controller Data Streaming
+ *              instance (part of an 'struct usb_hcd').
+ * @size:       Size of the received buffer
+ * @returns     0 if ok, < 0 errno code on error.
+ *
+ * The input buffer is @wa->nep_buffer, with @size bytes
+ * (guaranteed to fit in the allocated space,
+ * @wa->nep_buffer_size).
+ */
+static int wa_nep_queue(struct wahc *wa, size_t size)
+{
+	int result = 0;
+	struct device *dev = &wa->usb_iface->dev;
+	struct wa_notif_work *nw;
+
+	/* dev_fnstart(dev, "(wa %p, size %zu)\n", wa, size); */
+	BUG_ON(size > wa->nep_buffer_size);
+	if (size == 0)
+		goto out;
+	if (atomic_read(&wa->notifs_queued) > 200) {
+		if (printk_ratelimit())
+			dev_err(dev, "Too many notifications queued, "
+				"throttling back\n");
+		goto out;
+	}
+	nw = kzalloc(sizeof(*nw) + size, GFP_ATOMIC);
+	if (nw == NULL) {
+		if (printk_ratelimit())
+			dev_err(dev, "No memory to queue notification\n");
+		goto out;
+	}
+	INIT_WORK(&nw->work, wa_notif_dispatch);
+	nw->wa = wa_get(wa);
+	nw->size = size;
+	memcpy(nw->data, wa->nep_buffer, size);
+	atomic_inc(&wa->notifs_queued);		/* Throttling ctl */
+	queue_work(wusbd, &nw->work);
+out:
+	/* dev_fnend(dev, "(wa %p, size %zu) = result\n", wa, size, result); */
+	return result;
+}
+
+/*
+ * Callback for the notification event endpoint
+ *
+ * Check's that everything is fine and then passes the data to be
+ * queued to the workqueue.
+ */
+static void wa_nep_cb(struct urb *urb)
+{
+	int result;
+	struct wahc *wa = urb->context;
+	struct device *dev = &wa->usb_iface->dev;
+
+	switch (result = urb->status) {
+	case 0:
+		result = wa_nep_queue(wa, urb->actual_length);
+		if (result < 0)
+			dev_err(dev, "NEP: unable to process notification(s): "
+				"%d\n", result);
+		break;
+	case -ECONNRESET:	/* Not an error, but a controlled situation; */
+	case -ENOENT:		/* (we killed the URB)...so, no broadcast */
+	case -ESHUTDOWN:
+		dev_dbg(dev, "NEP: going down %d\n", urb->status);
+		goto out;
+	default:	/* On general errors, we retry unless it gets ugly */
+		if (edc_inc(&wa->nep_edc, EDC_MAX_ERRORS,
+			    EDC_ERROR_TIMEFRAME)) {
+			dev_err(dev, "NEP: URB max acceptable errors "
+				"exceeded, resetting device\n");
+			wa_reset_all(wa);
+			goto out;
+		}
+		dev_err(dev, "NEP: URB error %d\n", urb->status);
+	}
+	result = wa_nep_arm(wa, GFP_ATOMIC);
+	if (result < 0) {
+		dev_err(dev, "NEP: cannot submit URB: %d\n", result);
+		wa_reset_all(wa);
+	}
+out:
+	return;
+}
+
+/*
+ * Initialize @wa's notification and event's endpoint stuff
+ *
+ * This includes the allocating the read buffer, the context ID
+ * allocation bitmap, the URB and submitting the URB.
+ */
+int wa_nep_create(struct wahc *wa, struct usb_interface *iface)
+{
+	int result;
+	struct usb_endpoint_descriptor *epd;
+	struct usb_device *usb_dev = interface_to_usbdev(iface);
+	struct device *dev = &iface->dev;
+
+	edc_init(&wa->nep_edc);
+	epd = &iface->cur_altsetting->endpoint[0].desc;
+	wa->nep_buffer_size = 1024;
+	wa->nep_buffer = kmalloc(wa->nep_buffer_size, GFP_KERNEL);
+	if (wa->nep_buffer == NULL) {
+		dev_err(dev, "Unable to allocate notification's read buffer\n");
+		goto error_nep_buffer;
+	}
+	wa->nep_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (wa->nep_urb == NULL) {
+		dev_err(dev, "Unable to allocate notification URB\n");
+		goto error_urb_alloc;
+	}
+	usb_fill_int_urb(wa->nep_urb, usb_dev,
+			 usb_rcvintpipe(usb_dev, epd->bEndpointAddress),
+			 wa->nep_buffer, wa->nep_buffer_size,
+			 wa_nep_cb, wa, epd->bInterval);
+	result = wa_nep_arm(wa, GFP_KERNEL);
+	if (result < 0) {
+		dev_err(dev, "Cannot submit notification URB: %d\n", result);
+		goto error_nep_arm;
+	}
+	return 0;
+
+error_nep_arm:
+	usb_free_urb(wa->nep_urb);
+error_urb_alloc:
+	kfree(wa->nep_buffer);
+error_nep_buffer:
+	return -ENOMEM;
+}
+
+void wa_nep_destroy(struct wahc *wa)
+{
+	wa_nep_disarm(wa);
+	usb_free_urb(wa->nep_urb);
+	kfree(wa->nep_buffer);
+}
diff --git a/drivers/usb/wusbcore/wa-rpipe.c b/drivers/usb/wusbcore/wa-rpipe.c
new file mode 100644
index 0000000..f18e4aa
--- /dev/null
+++ b/drivers/usb/wusbcore/wa-rpipe.c
@@ -0,0 +1,562 @@
+/*
+ * WUSB Wire Adapter
+ * rpipe management
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ *
+ * RPIPE
+ *
+ *   Targetted at different downstream endpoints
+ *
+ *   Descriptor: use to config the remote pipe.
+ *
+ *   The number of blocks could be dynamic (wBlocks in descriptor is
+ *   0)--need to schedule them then.
+ *
+ * Each bit in wa->rpipe_bm represents if an rpipe is being used or
+ * not. Rpipes are represented with a 'struct wa_rpipe' that is
+ * attached to the hcpriv member of a 'struct usb_host_endpoint'.
+ *
+ * When you need to xfer data to an endpoint, you get an rpipe for it
+ * with wa_ep_rpipe_get(), which gives you a reference to the rpipe
+ * and keeps a single one (the first one) with the endpoint. When you
+ * are done transferring, you drop that reference. At the end the
+ * rpipe is always allocated and bound to the endpoint. There it might
+ * be recycled when not used.
+ *
+ * Addresses:
+ *
+ *  We use a 1:1 mapping mechanism between port address (0 based
+ *  index, actually) and the address. The USB stack knows about this.
+ *
+ *  USB Stack port number    4 (1 based)
+ *  WUSB code port index     3 (0 based)
+ *  USB Addresss             5 (2 based -- 0 is for default, 1 for root hub)
+ *
+ *  Now, because we don't use the concept as default address exactly
+ *  like the (wired) USB code does, we need to kind of skip it. So we
+ *  never take addresses from the urb->pipe, but from the
+ *  urb->dev->devnum, to make sure that we always have the right
+ *  destination address.
+ */
+#include <linux/init.h>
+#include <asm/atomic.h>
+#include <linux/bitmap.h>
+#include "wusbhc.h"
+#include "wa-hc.h"
+
+#define D_LOCAL 0
+#include <linux/uwb/debug.h>
+
+
+static int __rpipe_get_descr(struct wahc *wa,
+			     struct usb_rpipe_descriptor *descr, u16 index)
+{
+	ssize_t result;
+	struct device *dev = &wa->usb_iface->dev;
+
+	/* Get the RPIPE descriptor -- we cannot use the usb_get_descriptor()
+	 * function because the arguments are different.
+	 */
+	d_printf(1, dev, "rpipe %u: get descr\n", index);
+	result = usb_control_msg(
+		wa->usb_dev, usb_rcvctrlpipe(wa->usb_dev, 0),
+		USB_REQ_GET_DESCRIPTOR,
+		USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_RPIPE,
+		USB_DT_RPIPE<<8, index, descr, sizeof(*descr),
+		1000 /* FIXME: arbitrary */);
+	if (result < 0) {
+		dev_err(dev, "rpipe %u: get descriptor failed: %d\n",
+			index, (int)result);
+		goto error;
+	}
+	if (result < sizeof(*descr)) {
+		dev_err(dev, "rpipe %u: got short descriptor "
+			"(%zd vs %zd bytes needed)\n",
+			index, result, sizeof(*descr));
+		result = -EINVAL;
+		goto error;
+	}
+	result = 0;
+
+error:
+	return result;
+}
+
+/*
+ *
+ * The descriptor is assumed to be properly initialized (ie: you got
+ * it through __rpipe_get_descr()).
+ */
+static int __rpipe_set_descr(struct wahc *wa,
+			     struct usb_rpipe_descriptor *descr, u16 index)
+{
+	ssize_t result;
+	struct device *dev = &wa->usb_iface->dev;
+
+	/* we cannot use the usb_get_descriptor() function because the
+	 * arguments are different.
+	 */
+	d_printf(1, dev, "rpipe %u: set descr\n", index);
+	result = usb_control_msg(
+		wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
+		USB_REQ_SET_DESCRIPTOR,
+		USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_RPIPE,
+		USB_DT_RPIPE<<8, index, descr, sizeof(*descr),
+		HZ / 10);
+	if (result < 0) {
+		dev_err(dev, "rpipe %u: set descriptor failed: %d\n",
+			index, (int)result);
+		goto error;
+	}
+	if (result < sizeof(*descr)) {
+		dev_err(dev, "rpipe %u: sent short descriptor "
+			"(%zd vs %zd bytes required)\n",
+			index, result, sizeof(*descr));
+		result = -EINVAL;
+		goto error;
+	}
+	result = 0;
+
+error:
+	return result;
+
+}
+
+static void rpipe_init(struct wa_rpipe *rpipe)
+{
+	kref_init(&rpipe->refcnt);
+	spin_lock_init(&rpipe->seg_lock);
+	INIT_LIST_HEAD(&rpipe->seg_list);
+}
+
+static unsigned rpipe_get_idx(struct wahc *wa, unsigned rpipe_idx)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&wa->rpipe_bm_lock, flags);
+	rpipe_idx = find_next_zero_bit(wa->rpipe_bm, wa->rpipes, rpipe_idx);
+	if (rpipe_idx < wa->rpipes)
+		set_bit(rpipe_idx, wa->rpipe_bm);
+	spin_unlock_irqrestore(&wa->rpipe_bm_lock, flags);
+
+	return rpipe_idx;
+}
+
+static void rpipe_put_idx(struct wahc *wa, unsigned rpipe_idx)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&wa->rpipe_bm_lock, flags);
+	clear_bit(rpipe_idx, wa->rpipe_bm);
+	spin_unlock_irqrestore(&wa->rpipe_bm_lock, flags);
+}
+
+void rpipe_destroy(struct kref *_rpipe)
+{
+	struct wa_rpipe *rpipe = container_of(_rpipe, struct wa_rpipe, refcnt);
+	u8 index = le16_to_cpu(rpipe->descr.wRPipeIndex);
+	d_fnstart(1, NULL, "(rpipe %p %u)\n", rpipe, index);
+	if (rpipe->ep)
+		rpipe->ep->hcpriv = NULL;
+	rpipe_put_idx(rpipe->wa, index);
+	wa_put(rpipe->wa);
+	kfree(rpipe);
+	d_fnend(1, NULL, "(rpipe %p %u)\n", rpipe, index);
+}
+EXPORT_SYMBOL_GPL(rpipe_destroy);
+
+/*
+ * Locate an idle rpipe, create an structure for it and return it
+ *
+ * @wa 	  is referenced and unlocked
+ * @crs   enum rpipe_attr, required endpoint characteristics
+ *
+ * The rpipe can be used only sequentially (not in parallel).
+ *
+ * The rpipe is moved into the "ready" state.
+ */
+static int rpipe_get_idle(struct wa_rpipe **prpipe, struct wahc *wa, u8 crs,
+			  gfp_t gfp)
+{
+	int result;
+	unsigned rpipe_idx;
+	struct wa_rpipe *rpipe;
+	struct device *dev = &wa->usb_iface->dev;
+
+	d_fnstart(3, dev, "(wa %p crs 0x%02x)\n", wa, crs);
+	rpipe = kzalloc(sizeof(*rpipe), gfp);
+	if (rpipe == NULL)
+		return -ENOMEM;
+	rpipe_init(rpipe);
+
+	/* Look for an idle pipe */
+	for (rpipe_idx = 0; rpipe_idx < wa->rpipes; rpipe_idx++) {
+		rpipe_idx = rpipe_get_idx(wa, rpipe_idx);
+		if (rpipe_idx >= wa->rpipes)	/* no more pipes :( */
+			break;
+		result =  __rpipe_get_descr(wa, &rpipe->descr, rpipe_idx);
+		if (result < 0)
+			dev_err(dev, "Can't get descriptor for rpipe %u: %d\n",
+				rpipe_idx, result);
+		else if ((rpipe->descr.bmCharacteristics & crs) != 0)
+			goto found;
+		rpipe_put_idx(wa, rpipe_idx);
+	}
+	*prpipe = NULL;
+	kfree(rpipe);
+	d_fnend(3, dev, "(wa %p crs 0x%02x) = -ENXIO\n", wa, crs);
+	return -ENXIO;
+
+found:
+	set_bit(rpipe_idx, wa->rpipe_bm);
+	rpipe->wa = wa_get(wa);
+	*prpipe = rpipe;
+	d_fnstart(3, dev, "(wa %p crs 0x%02x) = 0\n", wa, crs);
+	return 0;
+}
+
+static int __rpipe_reset(struct wahc *wa, unsigned index)
+{
+	int result;
+	struct device *dev = &wa->usb_iface->dev;
+
+	d_printf(1, dev, "rpipe %u: reset\n", index);
+	result = usb_control_msg(
+		wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
+		USB_REQ_RPIPE_RESET,
+		USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_RPIPE,
+		0, index, NULL, 0, 1000 /* FIXME: arbitrary */);
+	if (result < 0)
+		dev_err(dev, "rpipe %u: reset failed: %d\n",
+			index, result);
+	return result;
+}
+
+/*
+ * Fake companion descriptor for ep0
+ *
+ * See WUSB1.0[7.4.4], most of this is zero for bulk/int/ctl
+ */
+static struct usb_wireless_ep_comp_descriptor epc0 = {
+	.bLength = sizeof(epc0),
+	.bDescriptorType = USB_DT_WIRELESS_ENDPOINT_COMP,
+/*	.bMaxBurst = 1, */
+	.bMaxSequence = 31,
+};
+
+/*
+ * Look for EP companion descriptor
+ *
+ * Get there, look for Inara in the endpoint's extra descriptors
+ */
+static struct usb_wireless_ep_comp_descriptor *rpipe_epc_find(
+		struct device *dev, struct usb_host_endpoint *ep)
+{
+	void *itr;
+	size_t itr_size;
+	struct usb_descriptor_header *hdr;
+	struct usb_wireless_ep_comp_descriptor *epcd;
+
+	d_fnstart(3, dev, "(ep %p)\n", ep);
+	if (ep->desc.bEndpointAddress == 0) {
+		epcd = &epc0;
+		goto out;
+	}
+	itr = ep->extra;
+	itr_size = ep->extralen;
+	epcd = NULL;
+	while (itr_size > 0) {
+		if (itr_size < sizeof(*hdr)) {
+			dev_err(dev, "HW Bug? ep 0x%02x: extra descriptors "
+				"at offset %zu: only %zu bytes left\n",
+				ep->desc.bEndpointAddress,
+				itr - (void *) ep->extra, itr_size);
+			break;
+		}
+		hdr = itr;
+		if (hdr->bDescriptorType == USB_DT_WIRELESS_ENDPOINT_COMP) {
+			epcd = itr;
+			break;
+		}
+		if (hdr->bLength > itr_size) {
+			dev_err(dev, "HW Bug? ep 0x%02x: extra descriptor "
+				"at offset %zu (type 0x%02x) "
+				"length %d but only %zu bytes left\n",
+				ep->desc.bEndpointAddress,
+				itr - (void *) ep->extra, hdr->bDescriptorType,
+				hdr->bLength, itr_size);
+			break;
+		}
+		itr += hdr->bLength;
+		itr_size -= hdr->bDescriptorType;
+	}
+out:
+	d_fnend(3, dev, "(ep %p) = %p\n", ep, epcd);
+	return epcd;
+}
+
+/*
+ * Aim an rpipe to its device & endpoint destination
+ *
+ * Make sure we change the address to unauthenticathed if the device
+ * is WUSB and it is not authenticated.
+ */
+static int rpipe_aim(struct wa_rpipe *rpipe, struct wahc *wa,
+		     struct usb_host_endpoint *ep, struct urb *urb, gfp_t gfp)
+{
+	int result = -ENOMSG;	/* better code for lack of companion? */
+	struct device *dev = &wa->usb_iface->dev;
+	struct usb_device *usb_dev = urb->dev;
+	struct usb_wireless_ep_comp_descriptor *epcd;
+	u8 unauth;
+
+	d_fnstart(3, dev, "(rpipe %p wa %p ep %p, urb %p)\n",
+		    rpipe, wa, ep, urb);
+	epcd = rpipe_epc_find(dev, ep);
+	if (epcd == NULL) {
+		dev_err(dev, "ep 0x%02x: can't find companion descriptor\n",
+			ep->desc.bEndpointAddress);
+		goto error;
+	}
+	unauth = usb_dev->wusb && !usb_dev->authenticated ? 0x80 : 0;
+	__rpipe_reset(wa, le16_to_cpu(rpipe->descr.wRPipeIndex));
+	atomic_set(&rpipe->segs_available, le16_to_cpu(rpipe->descr.wRequests));
+	/* FIXME: block allocation system; request with queuing and timeout */
+	/* FIXME: compute so seg_size > ep->maxpktsize */
+	rpipe->descr.wBlocks = cpu_to_le16(16);		/* given */
+	/* ep0 maxpktsize is 0x200 (WUSB1.0[4.8.1]) */
+	rpipe->descr.wMaxPacketSize = cpu_to_le16(ep->desc.wMaxPacketSize);
+	rpipe->descr.bHSHubAddress = 0;			/* reserved: zero */
+	rpipe->descr.bHSHubPort = wusb_port_no_to_idx(urb->dev->portnum);
+	/* FIXME: use maximum speed as supported or recommended by device */
+	rpipe->descr.bSpeed = usb_pipeendpoint(urb->pipe) == 0 ?
+		UWB_PHY_RATE_53 : UWB_PHY_RATE_200;
+	d_printf(2, dev, "addr %u (0x%02x) rpipe #%u ep# %u speed %d\n",
+		 urb->dev->devnum, urb->dev->devnum | unauth,
+		 le16_to_cpu(rpipe->descr.wRPipeIndex),
+		 usb_pipeendpoint(urb->pipe), rpipe->descr.bSpeed);
+	/* see security.c:wusb_update_address() */
+	if (unlikely(urb->dev->devnum == 0x80))
+		rpipe->descr.bDeviceAddress = 0;
+	else
+		rpipe->descr.bDeviceAddress = urb->dev->devnum | unauth;
+	rpipe->descr.bEndpointAddress = ep->desc.bEndpointAddress;
+	/* FIXME: bDataSequence */
+	rpipe->descr.bDataSequence = 0;
+	/* FIXME: dwCurrentWindow */
+	rpipe->descr.dwCurrentWindow = cpu_to_le32(1);
+	/* FIXME: bMaxDataSequence */
+	rpipe->descr.bMaxDataSequence = epcd->bMaxSequence - 1;
+	rpipe->descr.bInterval = ep->desc.bInterval;
+	/* FIXME: bOverTheAirInterval */
+	rpipe->descr.bOverTheAirInterval = 0;	/* 0 if not isoc */
+	/* FIXME: xmit power & preamble blah blah */
+	rpipe->descr.bmAttribute = ep->desc.bmAttributes & 0x03;
+	/* rpipe->descr.bmCharacteristics RO */
+	/* FIXME: bmRetryOptions */
+	rpipe->descr.bmRetryOptions = 15;
+	/* FIXME: use for assessing link quality? */
+	rpipe->descr.wNumTransactionErrors = 0;
+	result = __rpipe_set_descr(wa, &rpipe->descr,
+				   le16_to_cpu(rpipe->descr.wRPipeIndex));
+	if (result < 0) {
+		dev_err(dev, "Cannot aim rpipe: %d\n", result);
+		goto error;
+	}
+	result = 0;
+error:
+	d_fnend(3, dev, "(rpipe %p wa %p ep %p urb %p) = %d\n",
+		  rpipe, wa, ep, urb, result);
+	return result;
+}
+
+/*
+ * Check an aimed rpipe to make sure it points to where we want
+ *
+ * We use bit 19 of the Linux USB pipe bitmap for unauth vs auth
+ * space; when it is like that, we or 0x80 to make an unauth address.
+ */
+static int rpipe_check_aim(const struct wa_rpipe *rpipe, const struct wahc *wa,
+			   const struct usb_host_endpoint *ep,
+			   const struct urb *urb, gfp_t gfp)
+{
+	int result = 0;		/* better code for lack of companion? */
+	struct device *dev = &wa->usb_iface->dev;
+	struct usb_device *usb_dev = urb->dev;
+	u8 unauth = (usb_dev->wusb && !usb_dev->authenticated) ? 0x80 : 0;
+	u8 portnum = wusb_port_no_to_idx(urb->dev->portnum);
+
+	d_fnstart(3, dev, "(rpipe %p wa %p ep %p, urb %p)\n",
+		    rpipe, wa, ep, urb);
+#define AIM_CHECK(rdf, val, text)					\
+	do {								\
+		if (rpipe->descr.rdf != (val)) {			\
+			dev_err(dev,					\
+				"rpipe aim discrepancy: " #rdf " " text "\n", \
+				rpipe->descr.rdf, (val));		\
+			result = -EINVAL;				\
+			WARN_ON(1);					\
+		}							\
+	} while (0)
+	AIM_CHECK(wMaxPacketSize, cpu_to_le16(ep->desc.wMaxPacketSize),
+		  "(%u vs %u)");
+	AIM_CHECK(bHSHubPort, portnum, "(%u vs %u)");
+	AIM_CHECK(bSpeed, usb_pipeendpoint(urb->pipe) == 0 ?
+			UWB_PHY_RATE_53 : UWB_PHY_RATE_200,
+		  "(%u vs %u)");
+	AIM_CHECK(bDeviceAddress, urb->dev->devnum | unauth, "(%u vs %u)");
+	AIM_CHECK(bEndpointAddress, ep->desc.bEndpointAddress, "(%u vs %u)");
+	AIM_CHECK(bInterval, ep->desc.bInterval, "(%u vs %u)");
+	AIM_CHECK(bmAttribute, ep->desc.bmAttributes & 0x03, "(%u vs %u)");
+#undef AIM_CHECK
+	return result;
+}
+
+#ifndef CONFIG_BUG
+#define CONFIG_BUG 0
+#endif
+
+/*
+ * Make sure there is an rpipe allocated for an endpoint
+ *
+ * If already allocated, we just refcount it; if not, we get an
+ * idle one, aim it to the right location and take it.
+ *
+ * Attaches to ep->hcpriv and rpipe->ep to ep.
+ */
+int rpipe_get_by_ep(struct wahc *wa, struct usb_host_endpoint *ep,
+		    struct urb *urb, gfp_t gfp)
+{
+	int result = 0;
+	struct device *dev = &wa->usb_iface->dev;
+	struct wa_rpipe *rpipe;
+	u8 eptype;
+
+	d_fnstart(3, dev, "(wa %p ep %p urb %p gfp 0x%08x)\n", wa, ep, urb,
+		  gfp);
+	mutex_lock(&wa->rpipe_mutex);
+	rpipe = ep->hcpriv;
+	if (rpipe != NULL) {
+		if (CONFIG_BUG == 1) {
+			result = rpipe_check_aim(rpipe, wa, ep, urb, gfp);
+			if (result < 0)
+				goto error;
+		}
+		__rpipe_get(rpipe);
+		d_printf(2, dev, "ep 0x%02x: reusing rpipe %u\n",
+			 ep->desc.bEndpointAddress,
+			 le16_to_cpu(rpipe->descr.wRPipeIndex));
+	} else {
+		/* hmm, assign idle rpipe, aim it */
+		result = -ENOBUFS;
+		eptype = ep->desc.bmAttributes & 0x03;
+		result = rpipe_get_idle(&rpipe, wa, 1 << eptype, gfp);
+		if (result < 0)
+			goto error;
+		result = rpipe_aim(rpipe, wa, ep, urb, gfp);
+		if (result < 0) {
+			rpipe_put(rpipe);
+			goto error;
+		}
+		ep->hcpriv = rpipe;
+		rpipe->ep = ep;
+		__rpipe_get(rpipe);	/* for caching into ep->hcpriv */
+		d_printf(2, dev, "ep 0x%02x: using rpipe %u\n",
+			 ep->desc.bEndpointAddress,
+			 le16_to_cpu(rpipe->descr.wRPipeIndex));
+	}
+	d_dump(4, dev, &rpipe->descr, sizeof(rpipe->descr));
+error:
+	mutex_unlock(&wa->rpipe_mutex);
+	d_fnend(3, dev, "(wa %p ep %p urb %p gfp 0x%08x)\n", wa, ep, urb, gfp);
+	return result;
+}
+
+/*
+ * Allocate the bitmap for each rpipe.
+ */
+int wa_rpipes_create(struct wahc *wa)
+{
+	wa->rpipes = wa->wa_descr->wNumRPipes;
+	wa->rpipe_bm = kzalloc(BITS_TO_LONGS(wa->rpipes)*sizeof(unsigned long),
+			       GFP_KERNEL);
+	if (wa->rpipe_bm == NULL)
+		return -ENOMEM;
+	return 0;
+}
+
+void wa_rpipes_destroy(struct wahc *wa)
+{
+	struct device *dev = &wa->usb_iface->dev;
+	d_fnstart(3, dev, "(wa %p)\n", wa);
+	if (!bitmap_empty(wa->rpipe_bm, wa->rpipes)) {
+		char buf[256];
+		WARN_ON(1);
+		bitmap_scnprintf(buf, sizeof(buf), wa->rpipe_bm, wa->rpipes);
+		dev_err(dev, "BUG: pipes not released on exit: %s\n", buf);
+	}
+	kfree(wa->rpipe_bm);
+	d_fnend(3, dev, "(wa %p)\n", wa);
+}
+
+/*
+ * Release resources allocated for an endpoint
+ *
+ * If there is an associated rpipe to this endpoint, Abort any pending
+ * transfers and put it. If the rpipe ends up being destroyed,
+ * __rpipe_destroy() will cleanup ep->hcpriv.
+ *
+ * This is called before calling hcd->stop(), so you don't need to do
+ * anything else in there.
+ */
+void rpipe_ep_disable(struct wahc *wa, struct usb_host_endpoint *ep)
+{
+	struct device *dev = &wa->usb_iface->dev;
+	struct wa_rpipe *rpipe;
+	d_fnstart(2, dev, "(wa %p ep %p)\n", wa, ep);
+	mutex_lock(&wa->rpipe_mutex);
+	rpipe = ep->hcpriv;
+	if (rpipe != NULL) {
+		unsigned rc = atomic_read(&rpipe->refcnt.refcount);
+		int result;
+		u16 index = le16_to_cpu(rpipe->descr.wRPipeIndex);
+
+		if (rc != 1)
+			d_printf(1, dev, "(wa %p ep %p) rpipe %p refcnt %u\n",
+				 wa, ep, rpipe, rc);
+
+		d_printf(1, dev, "rpipe %u: abort\n", index);
+		result = usb_control_msg(
+			wa->usb_dev, usb_rcvctrlpipe(wa->usb_dev, 0),
+			USB_REQ_RPIPE_ABORT,
+			USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_RPIPE,
+			0, index, NULL, 0, 1000 /* FIXME: arbitrary */);
+		if (result < 0 && result != -ENODEV /* dev is gone */)
+			d_printf(1, dev, "(wa %p rpipe %u): abort failed: %d\n",
+				 wa, index, result);
+		rpipe_put(rpipe);
+	}
+	mutex_unlock(&wa->rpipe_mutex);
+	d_fnend(2, dev, "(wa %p ep %p)\n", wa, ep);
+	return;
+}
+EXPORT_SYMBOL_GPL(rpipe_ep_disable);
diff --git a/drivers/usb/wusbcore/wa-xfer.c b/drivers/usb/wusbcore/wa-xfer.c
new file mode 100644
index 0000000..c038635
--- /dev/null
+++ b/drivers/usb/wusbcore/wa-xfer.c
@@ -0,0 +1,1709 @@
+/*
+ * WUSB Wire Adapter
+ * Data transfer and URB enqueing
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * How transfers work: get a buffer, break it up in segments (segment
+ * size is a multiple of the maxpacket size). For each segment issue a
+ * segment request (struct wa_xfer_*), then send the data buffer if
+ * out or nothing if in (all over the DTO endpoint).
+ *
+ * For each submitted segment request, a notification will come over
+ * the NEP endpoint and a transfer result (struct xfer_result) will
+ * arrive in the DTI URB. Read it, get the xfer ID, see if there is
+ * data coming (inbound transfer), schedule a read and handle it.
+ *
+ * Sounds simple, it is a pain to implement.
+ *
+ *
+ * ENTRY POINTS
+ *
+ *   FIXME
+ *
+ * LIFE CYCLE / STATE DIAGRAM
+ *
+ *   FIXME
+ *
+ * THIS CODE IS DISGUSTING
+ *
+ *   Warned you are; it's my second try and still not happy with it.
+ *
+ * NOTES:
+ *
+ *   - No iso
+ *
+ *   - Supports DMA xfers, control, bulk and maybe interrupt
+ *
+ *   - Does not recycle unused rpipes
+ *
+ *     An rpipe is assigned to an endpoint the first time it is used,
+ *     and then it's there, assigned, until the endpoint is disabled
+ *     (destroyed [{h,d}wahc_op_ep_disable()]. The assignment of the
+ *     rpipe to the endpoint is done under the wa->rpipe_sem semaphore
+ *     (should be a mutex).
+ *
+ *     Two methods it could be done:
+ *
+ *     (a) set up a timer everytime an rpipe's use count drops to 1
+ *         (which means unused) or when a transfer ends. Reset the
+ *         timer when a xfer is queued. If the timer expires, release
+ *         the rpipe [see rpipe_ep_disable()].
+ *
+ *     (b) when looking for free rpipes to attach [rpipe_get_by_ep()],
+ *         when none are found go over the list, check their endpoint
+ *         and their activity record (if no last-xfer-done-ts in the
+ *         last x seconds) take it
+ *
+ *     However, due to the fact that we have a set of limited
+ *     resources (max-segments-at-the-same-time per xfer,
+ *     xfers-per-ripe, blocks-per-rpipe, rpipes-per-host), at the end
+ *     we are going to have to rebuild all this based on an scheduler,
+ *     to where we have a list of transactions to do and based on the
+ *     availability of the different requried components (blocks,
+ *     rpipes, segment slots, etc), we go scheduling them. Painful.
+ */
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/hash.h>
+#include "wa-hc.h"
+#include "wusbhc.h"
+
+#undef D_LOCAL
+#define D_LOCAL 0 /* 0 disabled, > 0 different levels... */
+#include <linux/uwb/debug.h>
+
+enum {
+	WA_SEGS_MAX = 255,
+};
+
+enum wa_seg_status {
+	WA_SEG_NOTREADY,
+	WA_SEG_READY,
+	WA_SEG_DELAYED,
+	WA_SEG_SUBMITTED,
+	WA_SEG_PENDING,
+	WA_SEG_DTI_PENDING,
+	WA_SEG_DONE,
+	WA_SEG_ERROR,
+	WA_SEG_ABORTED,
+};
+
+static void wa_xfer_delayed_run(struct wa_rpipe *);
+
+/*
+ * Life cycle governed by 'struct urb' (the refcount of the struct is
+ * that of the 'struct urb' and usb_free_urb() would free the whole
+ * struct).
+ */
+struct wa_seg {
+	struct urb urb;
+	struct urb *dto_urb;		/* for data output? */
+	struct list_head list_node;	/* for rpipe->req_list */
+	struct wa_xfer *xfer;		/* out xfer */
+	u8 index;			/* which segment we are */
+	enum wa_seg_status status;
+	ssize_t result;			/* bytes xfered or error */
+	struct wa_xfer_hdr xfer_hdr;
+	u8 xfer_extra[];		/* xtra space for xfer_hdr_ctl */
+};
+
+static void wa_seg_init(struct wa_seg *seg)
+{
+	/* usb_init_urb() repeats a lot of work, so we do it here */
+	kref_init(&seg->urb.kref);
+}
+
+/*
+ * Protected by xfer->lock
+ *
+ */
+struct wa_xfer {
+	struct kref refcnt;
+	struct list_head list_node;
+	spinlock_t lock;
+	u32 id;
+
+	struct wahc *wa;		/* Wire adapter we are plugged to */
+	struct usb_host_endpoint *ep;
+	struct urb *urb;		/* URB we are transfering for */
+	struct wa_seg **seg;		/* transfer segments */
+	u8 segs, segs_submitted, segs_done;
+	unsigned is_inbound:1;
+	unsigned is_dma:1;
+	size_t seg_size;
+	int result;
+
+	gfp_t gfp;			/* allocation mask */
+
+	struct wusb_dev *wusb_dev;	/* for activity timestamps */
+};
+
+static inline void wa_xfer_init(struct wa_xfer *xfer)
+{
+	kref_init(&xfer->refcnt);
+	INIT_LIST_HEAD(&xfer->list_node);
+	spin_lock_init(&xfer->lock);
+}
+
+/*
+ * Destory a transfer structure
+ *
+ * Note that the xfer->seg[index] thingies follow the URB life cycle,
+ * so we need to put them, not free them.
+ */
+static void wa_xfer_destroy(struct kref *_xfer)
+{
+	struct wa_xfer *xfer = container_of(_xfer, struct wa_xfer, refcnt);
+	if (xfer->seg) {
+		unsigned cnt;
+		for (cnt = 0; cnt < xfer->segs; cnt++) {
+			if (xfer->is_inbound)
+				usb_put_urb(xfer->seg[cnt]->dto_urb);
+			usb_put_urb(&xfer->seg[cnt]->urb);
+		}
+	}
+	kfree(xfer);
+	d_printf(2, NULL, "xfer %p destroyed\n", xfer);
+}
+
+static void wa_xfer_get(struct wa_xfer *xfer)
+{
+	kref_get(&xfer->refcnt);
+}
+
+static void wa_xfer_put(struct wa_xfer *xfer)
+{
+	d_fnstart(3, NULL, "(xfer %p) -- ref count bef put %d\n",
+		    xfer, atomic_read(&xfer->refcnt.refcount));
+	kref_put(&xfer->refcnt, wa_xfer_destroy);
+	d_fnend(3, NULL, "(xfer %p) = void\n", xfer);
+}
+
+/*
+ * xfer is referenced
+ *
+ * xfer->lock has to be unlocked
+ *
+ * We take xfer->lock for setting the result; this is a barrier
+ * against drivers/usb/core/hcd.c:unlink1() being called after we call
+ * usb_hcd_giveback_urb() and wa_urb_dequeue() trying to get a
+ * reference to the transfer.
+ */
+static void wa_xfer_giveback(struct wa_xfer *xfer)
+{
+	unsigned long flags;
+	d_fnstart(3, NULL, "(xfer %p)\n", xfer);
+	spin_lock_irqsave(&xfer->wa->xfer_list_lock, flags);
+	list_del_init(&xfer->list_node);
+	spin_unlock_irqrestore(&xfer->wa->xfer_list_lock, flags);
+	/* FIXME: segmentation broken -- kills DWA */
+	wusbhc_giveback_urb(xfer->wa->wusb, xfer->urb, xfer->result);
+	wa_put(xfer->wa);
+	wa_xfer_put(xfer);
+	d_fnend(3, NULL, "(xfer %p) = void\n", xfer);
+}
+
+/*
+ * xfer is referenced
+ *
+ * xfer->lock has to be unlocked
+ */
+static void wa_xfer_completion(struct wa_xfer *xfer)
+{
+	d_fnstart(3, NULL, "(xfer %p)\n", xfer);
+	if (xfer->wusb_dev)
+		wusb_dev_put(xfer->wusb_dev);
+	rpipe_put(xfer->ep->hcpriv);
+	wa_xfer_giveback(xfer);
+	d_fnend(3, NULL, "(xfer %p) = void\n", xfer);
+	return;
+}
+
+/*
+ * If transfer is done, wrap it up and return true
+ *
+ * xfer->lock has to be locked
+ */
+static unsigned __wa_xfer_is_done(struct wa_xfer *xfer)
+{
+	unsigned result, cnt;
+	struct wa_seg *seg;
+	struct urb *urb = xfer->urb;
+	unsigned found_short = 0;
+
+	d_fnstart(3, NULL, "(xfer %p)\n", xfer);
+	result = xfer->segs_done == xfer->segs_submitted;
+	if (result == 0)
+		goto out;
+	urb->actual_length = 0;
+	for (cnt = 0; cnt < xfer->segs; cnt++) {
+		seg = xfer->seg[cnt];
+		switch (seg->status) {
+		case WA_SEG_DONE:
+			if (found_short && seg->result > 0) {
+				if (printk_ratelimit())
+					printk(KERN_ERR "xfer %p#%u: bad short "
+					       "segments (%zu)\n", xfer, cnt,
+					       seg->result);
+				urb->status = -EINVAL;
+				goto out;
+			}
+			urb->actual_length += seg->result;
+			if (seg->result < xfer->seg_size
+			    && cnt != xfer->segs-1)
+				found_short = 1;
+			d_printf(2, NULL, "xfer %p#%u: DONE short %d "
+				 "result %zu urb->actual_length %d\n",
+				 xfer, seg->index, found_short, seg->result,
+				 urb->actual_length);
+			break;
+		case WA_SEG_ERROR:
+			xfer->result = seg->result;
+			d_printf(2, NULL, "xfer %p#%u: ERROR result %zu\n",
+				 xfer, seg->index, seg->result);
+			goto out;
+		case WA_SEG_ABORTED:
+			WARN_ON(urb->status != -ECONNRESET
+				&& urb->status != -ENOENT);
+			d_printf(2, NULL, "xfer %p#%u ABORTED: result %d\n",
+				 xfer, seg->index, urb->status);
+			xfer->result = urb->status;
+			goto out;
+		default:
+			/* if (printk_ratelimit()) */
+				printk(KERN_ERR "xfer %p#%u: "
+				       "is_done bad state %d\n",
+				       xfer, cnt, seg->status);
+			xfer->result = -EINVAL;
+			WARN_ON(1);
+			goto out;
+		}
+	}
+	xfer->result = 0;
+out:
+	d_fnend(3, NULL, "(xfer %p) = void\n", xfer);
+	return result;
+}
+
+/*
+ * Initialize a transfer's ID
+ *
+ * We need to use a sequential number; if we use the pointer or the
+ * hash of the pointer, it can repeat over sequential transfers and
+ * then it will confuse the HWA....wonder why in hell they put a 32
+ * bit handle in there then.
+ */
+static void wa_xfer_id_init(struct wa_xfer *xfer)
+{
+	xfer->id = atomic_add_return(1, &xfer->wa->xfer_id_count);
+}
+
+/*
+ * Return the xfer's ID associated with xfer
+ *
+ * Need to generate a
+ */
+static u32 wa_xfer_id(struct wa_xfer *xfer)
+{
+	return xfer->id;
+}
+
+/*
+ * Search for a transfer list ID on the HCD's URB list
+ *
+ * For 32 bit architectures, we use the pointer itself; for 64 bits, a
+ * 32-bit hash of the pointer.
+ *
+ * @returns NULL if not found.
+ */
+static struct wa_xfer *wa_xfer_get_by_id(struct wahc *wa, u32 id)
+{
+	unsigned long flags;
+	struct wa_xfer *xfer_itr;
+	spin_lock_irqsave(&wa->xfer_list_lock, flags);
+	list_for_each_entry(xfer_itr, &wa->xfer_list, list_node) {
+		if (id == xfer_itr->id) {
+			wa_xfer_get(xfer_itr);
+			goto out;
+		}
+	}
+	xfer_itr = NULL;
+out:
+	spin_unlock_irqrestore(&wa->xfer_list_lock, flags);
+	return xfer_itr;
+}
+
+struct wa_xfer_abort_buffer {
+	struct urb urb;
+	struct wa_xfer_abort cmd;
+};
+
+static void __wa_xfer_abort_cb(struct urb *urb)
+{
+	struct wa_xfer_abort_buffer *b = urb->context;
+	usb_put_urb(&b->urb);
+}
+
+/*
+ * Aborts an ongoing transaction
+ *
+ * Assumes the transfer is referenced and locked and in a submitted
+ * state (mainly that there is an endpoint/rpipe assigned).
+ *
+ * The callback (see above) does nothing but freeing up the data by
+ * putting the URB. Because the URB is allocated at the head of the
+ * struct, the whole space we allocated is kfreed.
+ *
+ * We'll get an 'aborted transaction' xfer result on DTI, that'll
+ * politely ignore because at this point the transaction has been
+ * marked as aborted already.
+ */
+static void __wa_xfer_abort(struct wa_xfer *xfer)
+{
+	int result;
+	struct device *dev = &xfer->wa->usb_iface->dev;
+	struct wa_xfer_abort_buffer *b;
+	struct wa_rpipe *rpipe = xfer->ep->hcpriv;
+
+	b = kmalloc(sizeof(*b), GFP_ATOMIC);
+	if (b == NULL)
+		goto error_kmalloc;
+	b->cmd.bLength =  sizeof(b->cmd);
+	b->cmd.bRequestType = WA_XFER_ABORT;
+	b->cmd.wRPipe = rpipe->descr.wRPipeIndex;
+	b->cmd.dwTransferID = wa_xfer_id(xfer);
+
+	usb_init_urb(&b->urb);
+	usb_fill_bulk_urb(&b->urb, xfer->wa->usb_dev,
+		usb_sndbulkpipe(xfer->wa->usb_dev,
+				xfer->wa->dto_epd->bEndpointAddress),
+		&b->cmd, sizeof(b->cmd), __wa_xfer_abort_cb, b);
+	result = usb_submit_urb(&b->urb, GFP_ATOMIC);
+	if (result < 0)
+		goto error_submit;
+	return;				/* callback frees! */
+
+
+error_submit:
+	if (printk_ratelimit())
+		dev_err(dev, "xfer %p: Can't submit abort request: %d\n",
+			xfer, result);
+	kfree(b);
+error_kmalloc:
+	return;
+
+}
+
+/*
+ *
+ * @returns < 0 on error, transfer segment request size if ok
+ */
+static ssize_t __wa_xfer_setup_sizes(struct wa_xfer *xfer,
+				     enum wa_xfer_type *pxfer_type)
+{
+	ssize_t result;
+	struct device *dev = &xfer->wa->usb_iface->dev;
+	size_t maxpktsize;
+	struct urb *urb = xfer->urb;
+	struct wa_rpipe *rpipe = xfer->ep->hcpriv;
+
+	d_fnstart(3, dev, "(xfer %p [rpipe %p] urb %p)\n",
+		  xfer, rpipe, urb);
+	switch (rpipe->descr.bmAttribute & 0x3) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		*pxfer_type = WA_XFER_TYPE_CTL;
+		result = sizeof(struct wa_xfer_ctl);
+		break;
+	case USB_ENDPOINT_XFER_INT:
+	case USB_ENDPOINT_XFER_BULK:
+		*pxfer_type = WA_XFER_TYPE_BI;
+		result = sizeof(struct wa_xfer_bi);
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		dev_err(dev, "FIXME: ISOC not implemented\n");
+		result = -ENOSYS;
+		goto error;
+	default:
+		/* never happens */
+		BUG();
+		result = -EINVAL;	/* shut gcc up */
+	};
+	xfer->is_inbound = urb->pipe & USB_DIR_IN ? 1 : 0;
+	xfer->is_dma = urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP ? 1 : 0;
+	xfer->seg_size = le16_to_cpu(rpipe->descr.wBlocks)
+		* 1 << (xfer->wa->wa_descr->bRPipeBlockSize - 1);
+	/* Compute the segment size and make sure it is a multiple of
+	 * the maxpktsize (WUSB1.0[8.3.3.1])...not really too much of
+	 * a check (FIXME) */
+	maxpktsize = le16_to_cpu(rpipe->descr.wMaxPacketSize);
+	if (xfer->seg_size < maxpktsize) {
+		dev_err(dev, "HW BUG? seg_size %zu smaller than maxpktsize "
+			"%zu\n", xfer->seg_size, maxpktsize);
+		result = -EINVAL;
+		goto error;
+	}
+	xfer->seg_size = (xfer->seg_size / maxpktsize) * maxpktsize;
+	xfer->segs = (urb->transfer_buffer_length + xfer->seg_size - 1)
+		/ xfer->seg_size;
+	if (xfer->segs >= WA_SEGS_MAX) {
+		dev_err(dev, "BUG? ops, number of segments %d bigger than %d\n",
+			(int)(urb->transfer_buffer_length / xfer->seg_size),
+			WA_SEGS_MAX);
+		result = -EINVAL;
+		goto error;
+	}
+	if (xfer->segs == 0 && *pxfer_type == WA_XFER_TYPE_CTL)
+		xfer->segs = 1;
+error:
+	d_fnend(3, dev, "(xfer %p [rpipe %p] urb %p) = %d\n",
+		xfer, rpipe, urb, (int)result);
+	return result;
+}
+
+/** Fill in the common request header and xfer-type specific data. */
+static void __wa_xfer_setup_hdr0(struct wa_xfer *xfer,
+				 struct wa_xfer_hdr *xfer_hdr0,
+				 enum wa_xfer_type xfer_type,
+				 size_t xfer_hdr_size)
+{
+	struct wa_rpipe *rpipe = xfer->ep->hcpriv;
+
+	xfer_hdr0 = &xfer->seg[0]->xfer_hdr;
+	xfer_hdr0->bLength = xfer_hdr_size;
+	xfer_hdr0->bRequestType = xfer_type;
+	xfer_hdr0->wRPipe = rpipe->descr.wRPipeIndex;
+	xfer_hdr0->dwTransferID = wa_xfer_id(xfer);
+	xfer_hdr0->bTransferSegment = 0;
+	switch (xfer_type) {
+	case WA_XFER_TYPE_CTL: {
+		struct wa_xfer_ctl *xfer_ctl =
+			container_of(xfer_hdr0, struct wa_xfer_ctl, hdr);
+		xfer_ctl->bmAttribute = xfer->is_inbound ? 1 : 0;
+		BUG_ON(xfer->urb->transfer_flags & URB_NO_SETUP_DMA_MAP
+		       && xfer->urb->setup_packet == NULL);
+		memcpy(&xfer_ctl->baSetupData, xfer->urb->setup_packet,
+		       sizeof(xfer_ctl->baSetupData));
+		break;
+	}
+	case WA_XFER_TYPE_BI:
+		break;
+	case WA_XFER_TYPE_ISO:
+		printk(KERN_ERR "FIXME: ISOC not implemented\n");
+	default:
+		BUG();
+	};
+}
+
+/*
+ * Callback for the OUT data phase of the segment request
+ *
+ * Check wa_seg_cb(); most comments also apply here because this
+ * function does almost the same thing and they work closely
+ * together.
+ *
+ * If the seg request has failed but this DTO phase has suceeded,
+ * wa_seg_cb() has already failed the segment and moved the
+ * status to WA_SEG_ERROR, so this will go through 'case 0' and
+ * effectively do nothing.
+ */
+static void wa_seg_dto_cb(struct urb *urb)
+{
+	struct wa_seg *seg = urb->context;
+	struct wa_xfer *xfer = seg->xfer;
+	struct wahc *wa;
+	struct device *dev;
+	struct wa_rpipe *rpipe;
+	unsigned long flags;
+	unsigned rpipe_ready = 0;
+	u8 done = 0;
+
+	d_fnstart(3, NULL, "(urb %p [%d])\n", urb, urb->status);
+	switch (urb->status) {
+	case 0:
+		spin_lock_irqsave(&xfer->lock, flags);
+		wa = xfer->wa;
+		dev = &wa->usb_iface->dev;
+		d_printf(2, dev, "xfer %p#%u: data out done (%d bytes)\n",
+			   xfer, seg->index, urb->actual_length);
+		if (seg->status < WA_SEG_PENDING)
+			seg->status = WA_SEG_PENDING;
+		seg->result = urb->actual_length;
+		spin_unlock_irqrestore(&xfer->lock, flags);
+		break;
+	case -ECONNRESET:	/* URB unlinked; no need to do anything */
+	case -ENOENT:		/* as it was done by the who unlinked us */
+		break;
+	default:		/* Other errors ... */
+		spin_lock_irqsave(&xfer->lock, flags);
+		wa = xfer->wa;
+		dev = &wa->usb_iface->dev;
+		rpipe = xfer->ep->hcpriv;
+		if (printk_ratelimit())
+			dev_err(dev, "xfer %p#%u: data out error %d\n",
+				xfer, seg->index, urb->status);
+		if (edc_inc(&wa->nep_edc, EDC_MAX_ERRORS,
+			    EDC_ERROR_TIMEFRAME)){
+			dev_err(dev, "DTO: URB max acceptable errors "
+				"exceeded, resetting device\n");
+			wa_reset_all(wa);
+		}
+		if (seg->status != WA_SEG_ERROR) {
+			seg->status = WA_SEG_ERROR;
+			seg->result = urb->status;
+			xfer->segs_done++;
+			__wa_xfer_abort(xfer);
+			rpipe_ready = rpipe_avail_inc(rpipe);
+			done = __wa_xfer_is_done(xfer);
+		}
+		spin_unlock_irqrestore(&xfer->lock, flags);
+		if (done)
+			wa_xfer_completion(xfer);
+		if (rpipe_ready)
+			wa_xfer_delayed_run(rpipe);
+	}
+	d_fnend(3, NULL, "(urb %p [%d]) = void\n", urb, urb->status);
+}
+
+/*
+ * Callback for the segment request
+ *
+ * If succesful transition state (unless already transitioned or
+ * outbound transfer); otherwise, take a note of the error, mark this
+ * segment done and try completion.
+ *
+ * Note we don't access until we are sure that the transfer hasn't
+ * been cancelled (ECONNRESET, ENOENT), which could mean that
+ * seg->xfer could be already gone.
+ *
+ * We have to check before setting the status to WA_SEG_PENDING
+ * because sometimes the xfer result callback arrives before this
+ * callback (geeeeeeze), so it might happen that we are already in
+ * another state. As well, we don't set it if the transfer is inbound,
+ * as in that case, wa_seg_dto_cb will do it when the OUT data phase
+ * finishes.
+ */
+static void wa_seg_cb(struct urb *urb)
+{
+	struct wa_seg *seg = urb->context;
+	struct wa_xfer *xfer = seg->xfer;
+	struct wahc *wa;
+	struct device *dev;
+	struct wa_rpipe *rpipe;
+	unsigned long flags;
+	unsigned rpipe_ready;
+	u8 done = 0;
+
+	d_fnstart(3, NULL, "(urb %p [%d])\n", urb, urb->status);
+	switch (urb->status) {
+	case 0:
+		spin_lock_irqsave(&xfer->lock, flags);
+		wa = xfer->wa;
+		dev = &wa->usb_iface->dev;
+		d_printf(2, dev, "xfer %p#%u: request done\n",
+			   xfer, seg->index);
+		if (xfer->is_inbound && seg->status < WA_SEG_PENDING)
+			seg->status = WA_SEG_PENDING;
+		spin_unlock_irqrestore(&xfer->lock, flags);
+		break;
+	case -ECONNRESET:	/* URB unlinked; no need to do anything */
+	case -ENOENT:		/* as it was done by the who unlinked us */
+		break;
+	default:		/* Other errors ... */
+		spin_lock_irqsave(&xfer->lock, flags);
+		wa = xfer->wa;
+		dev = &wa->usb_iface->dev;
+		rpipe = xfer->ep->hcpriv;
+		if (printk_ratelimit())
+			dev_err(dev, "xfer %p#%u: request error %d\n",
+				xfer, seg->index, urb->status);
+		if (edc_inc(&wa->nep_edc, EDC_MAX_ERRORS,
+			    EDC_ERROR_TIMEFRAME)){
+			dev_err(dev, "DTO: URB max acceptable errors "
+				"exceeded, resetting device\n");
+			wa_reset_all(wa);
+		}
+		usb_unlink_urb(seg->dto_urb);
+		seg->status = WA_SEG_ERROR;
+		seg->result = urb->status;
+		xfer->segs_done++;
+		__wa_xfer_abort(xfer);
+		rpipe_ready = rpipe_avail_inc(rpipe);
+		done = __wa_xfer_is_done(xfer);
+		spin_unlock_irqrestore(&xfer->lock, flags);
+		if (done)
+			wa_xfer_completion(xfer);
+		if (rpipe_ready)
+			wa_xfer_delayed_run(rpipe);
+	}
+	d_fnend(3, NULL, "(urb %p [%d]) = void\n", urb, urb->status);
+}
+
+/*
+ * Allocate the segs array and initialize each of them
+ *
+ * The segments are freed by wa_xfer_destroy() when the xfer use count
+ * drops to zero; however, because each segment is given the same life
+ * cycle as the USB URB it contains, it is actually freed by
+ * usb_put_urb() on the contained USB URB (twisted, eh?).
+ */
+static int __wa_xfer_setup_segs(struct wa_xfer *xfer, size_t xfer_hdr_size)
+{
+	int result, cnt;
+	size_t alloc_size = sizeof(*xfer->seg[0])
+		- sizeof(xfer->seg[0]->xfer_hdr) + xfer_hdr_size;
+	struct usb_device *usb_dev = xfer->wa->usb_dev;
+	const struct usb_endpoint_descriptor *dto_epd = xfer->wa->dto_epd;
+	struct wa_seg *seg;
+	size_t buf_itr, buf_size, buf_itr_size;
+
+	result = -ENOMEM;
+	xfer->seg = kcalloc(xfer->segs, sizeof(xfer->seg[0]), GFP_ATOMIC);
+	if (xfer->seg == NULL)
+		goto error_segs_kzalloc;
+	buf_itr = 0;
+	buf_size = xfer->urb->transfer_buffer_length;
+	for (cnt = 0; cnt < xfer->segs; cnt++) {
+		seg = xfer->seg[cnt] = kzalloc(alloc_size, GFP_ATOMIC);
+		if (seg == NULL)
+			goto error_seg_kzalloc;
+		wa_seg_init(seg);
+		seg->xfer = xfer;
+		seg->index = cnt;
+		usb_fill_bulk_urb(&seg->urb, usb_dev,
+				  usb_sndbulkpipe(usb_dev,
+						  dto_epd->bEndpointAddress),
+				  &seg->xfer_hdr, xfer_hdr_size,
+				  wa_seg_cb, seg);
+		buf_itr_size = buf_size > xfer->seg_size ?
+			xfer->seg_size : buf_size;
+		if (xfer->is_inbound == 0 && buf_size > 0) {
+			seg->dto_urb = usb_alloc_urb(0, GFP_ATOMIC);
+			if (seg->dto_urb == NULL)
+				goto error_dto_alloc;
+			usb_fill_bulk_urb(
+				seg->dto_urb, usb_dev,
+				usb_sndbulkpipe(usb_dev,
+						dto_epd->bEndpointAddress),
+				NULL, 0, wa_seg_dto_cb, seg);
+			if (xfer->is_dma) {
+				seg->dto_urb->transfer_dma =
+					xfer->urb->transfer_dma + buf_itr;
+				seg->dto_urb->transfer_flags |=
+					URB_NO_TRANSFER_DMA_MAP;
+			} else
+				seg->dto_urb->transfer_buffer =
+					xfer->urb->transfer_buffer + buf_itr;
+			seg->dto_urb->transfer_buffer_length = buf_itr_size;
+		}
+		seg->status = WA_SEG_READY;
+		buf_itr += buf_itr_size;
+		buf_size -= buf_itr_size;
+	}
+	return 0;
+
+error_dto_alloc:
+	kfree(xfer->seg[cnt]);
+	cnt--;
+error_seg_kzalloc:
+	/* use the fact that cnt is left at were it failed */
+	for (; cnt > 0; cnt--) {
+		if (xfer->is_inbound == 0)
+			kfree(xfer->seg[cnt]->dto_urb);
+		kfree(xfer->seg[cnt]);
+	}
+error_segs_kzalloc:
+	return result;
+}
+
+/*
+ * Allocates all the stuff needed to submit a transfer
+ *
+ * Breaks the whole data buffer in a list of segments, each one has a
+ * structure allocated to it and linked in xfer->seg[index]
+ *
+ * FIXME: merge setup_segs() and the last part of this function, no
+ *        need to do two for loops when we could run everything in a
+ *        single one
+ */
+static int __wa_xfer_setup(struct wa_xfer *xfer, struct urb *urb)
+{
+	int result;
+	struct device *dev = &xfer->wa->usb_iface->dev;
+	enum wa_xfer_type xfer_type = 0; /* shut up GCC */
+	size_t xfer_hdr_size, cnt, transfer_size;
+	struct wa_xfer_hdr *xfer_hdr0, *xfer_hdr;
+
+	d_fnstart(3, dev, "(xfer %p [rpipe %p] urb %p)\n",
+		  xfer, xfer->ep->hcpriv, urb);
+
+	result = __wa_xfer_setup_sizes(xfer, &xfer_type);
+	if (result < 0)
+		goto error_setup_sizes;
+	xfer_hdr_size = result;
+	result = __wa_xfer_setup_segs(xfer, xfer_hdr_size);
+	if (result < 0) {
+		dev_err(dev, "xfer %p: Failed to allocate %d segments: %d\n",
+			xfer, xfer->segs, result);
+		goto error_setup_segs;
+	}
+	/* Fill the first header */
+	xfer_hdr0 = &xfer->seg[0]->xfer_hdr;
+	wa_xfer_id_init(xfer);
+	__wa_xfer_setup_hdr0(xfer, xfer_hdr0, xfer_type, xfer_hdr_size);
+
+	/* Fill remainig headers */
+	xfer_hdr = xfer_hdr0;
+	transfer_size = urb->transfer_buffer_length;
+	xfer_hdr0->dwTransferLength = transfer_size > xfer->seg_size ?
+		xfer->seg_size : transfer_size;
+	transfer_size -=  xfer->seg_size;
+	for (cnt = 1; cnt < xfer->segs; cnt++) {
+		xfer_hdr = &xfer->seg[cnt]->xfer_hdr;
+		memcpy(xfer_hdr, xfer_hdr0, xfer_hdr_size);
+		xfer_hdr->bTransferSegment = cnt;
+		xfer_hdr->dwTransferLength = transfer_size > xfer->seg_size ?
+			cpu_to_le32(xfer->seg_size)
+			: cpu_to_le32(transfer_size);
+		xfer->seg[cnt]->status = WA_SEG_READY;
+		transfer_size -=  xfer->seg_size;
+	}
+	xfer_hdr->bTransferSegment |= 0x80;	/* this is the last segment */
+	result = 0;
+error_setup_segs:
+error_setup_sizes:
+	d_fnend(3, dev, "(xfer %p [rpipe %p] urb %p) = %d\n",
+		xfer, xfer->ep->hcpriv, urb, result);
+	return result;
+}
+
+/*
+ *
+ *
+ * rpipe->seg_lock is held!
+ */
+static int __wa_seg_submit(struct wa_rpipe *rpipe, struct wa_xfer *xfer,
+			   struct wa_seg *seg)
+{
+	int result;
+	result = usb_submit_urb(&seg->urb, GFP_ATOMIC);
+	if (result < 0) {
+		printk(KERN_ERR "xfer %p#%u: REQ submit failed: %d\n",
+		       xfer, seg->index, result);
+		goto error_seg_submit;
+	}
+	if (seg->dto_urb) {
+		result = usb_submit_urb(seg->dto_urb, GFP_ATOMIC);
+		if (result < 0) {
+			printk(KERN_ERR "xfer %p#%u: DTO submit failed: %d\n",
+			       xfer, seg->index, result);
+			goto error_dto_submit;
+		}
+	}
+	seg->status = WA_SEG_SUBMITTED;
+	rpipe_avail_dec(rpipe);
+	return 0;
+
+error_dto_submit:
+	usb_unlink_urb(&seg->urb);
+error_seg_submit:
+	seg->status = WA_SEG_ERROR;
+	seg->result = result;
+	return result;
+}
+
+/*
+ * Execute more queued request segments until the maximum concurrent allowed
+ *
+ * The ugly unlock/lock sequence on the error path is needed as the
+ * xfer->lock normally nests the seg_lock and not viceversa.
+ *
+ */
+static void wa_xfer_delayed_run(struct wa_rpipe *rpipe)
+{
+	int result;
+	struct device *dev = &rpipe->wa->usb_iface->dev;
+	struct wa_seg *seg;
+	struct wa_xfer *xfer;
+	unsigned long flags;
+
+	d_fnstart(1, dev, "(rpipe #%d) %d segments available\n",
+		  le16_to_cpu(rpipe->descr.wRPipeIndex),
+		  atomic_read(&rpipe->segs_available));
+	spin_lock_irqsave(&rpipe->seg_lock, flags);
+	while (atomic_read(&rpipe->segs_available) > 0
+	      && !list_empty(&rpipe->seg_list)) {
+		seg = list_entry(rpipe->seg_list.next, struct wa_seg,
+				 list_node);
+		list_del(&seg->list_node);
+		xfer = seg->xfer;
+		result = __wa_seg_submit(rpipe, xfer, seg);
+		d_printf(1, dev, "xfer %p#%u submitted from delayed "
+			 "[%d segments available] %d\n",
+			 xfer, seg->index,
+			 atomic_read(&rpipe->segs_available), result);
+		if (unlikely(result < 0)) {
+			spin_unlock_irqrestore(&rpipe->seg_lock, flags);
+			spin_lock_irqsave(&xfer->lock, flags);
+			__wa_xfer_abort(xfer);
+			xfer->segs_done++;
+			spin_unlock_irqrestore(&xfer->lock, flags);
+			spin_lock_irqsave(&rpipe->seg_lock, flags);
+		}
+	}
+	spin_unlock_irqrestore(&rpipe->seg_lock, flags);
+	d_fnend(1, dev, "(rpipe #%d) = void, %d segments available\n",
+		le16_to_cpu(rpipe->descr.wRPipeIndex),
+		atomic_read(&rpipe->segs_available));
+
+}
+
+/*
+ *
+ * xfer->lock is taken
+ *
+ * On failure submitting we just stop submitting and return error;
+ * wa_urb_enqueue_b() will execute the completion path
+ */
+static int __wa_xfer_submit(struct wa_xfer *xfer)
+{
+	int result;
+	struct wahc *wa = xfer->wa;
+	struct device *dev = &wa->usb_iface->dev;
+	unsigned cnt;
+	struct wa_seg *seg;
+	unsigned long flags;
+	struct wa_rpipe *rpipe = xfer->ep->hcpriv;
+	size_t maxrequests = le16_to_cpu(rpipe->descr.wRequests);
+	u8 available;
+	u8 empty;
+
+	d_fnstart(3, dev, "(xfer %p [rpipe %p])\n",
+		  xfer, xfer->ep->hcpriv);
+
+	spin_lock_irqsave(&wa->xfer_list_lock, flags);
+	list_add_tail(&xfer->list_node, &wa->xfer_list);
+	spin_unlock_irqrestore(&wa->xfer_list_lock, flags);
+
+	BUG_ON(atomic_read(&rpipe->segs_available) > maxrequests);
+	result = 0;
+	spin_lock_irqsave(&rpipe->seg_lock, flags);
+	for (cnt = 0; cnt < xfer->segs; cnt++) {
+		available = atomic_read(&rpipe->segs_available);
+		empty = list_empty(&rpipe->seg_list);
+		seg = xfer->seg[cnt];
+		d_printf(2, dev, "xfer %p#%u: available %u empty %u (%s)\n",
+			 xfer, cnt, available, empty,
+			 available == 0 || !empty ? "delayed" : "submitted");
+		if (available == 0 || !empty) {
+			d_printf(1, dev, "xfer %p#%u: delayed\n", xfer, cnt);
+			seg->status = WA_SEG_DELAYED;
+			list_add_tail(&seg->list_node, &rpipe->seg_list);
+		} else {
+			result = __wa_seg_submit(rpipe, xfer, seg);
+			if (result < 0)
+				goto error_seg_submit;
+		}
+		xfer->segs_submitted++;
+	}
+	spin_unlock_irqrestore(&rpipe->seg_lock, flags);
+	d_fnend(3, dev, "(xfer %p [rpipe %p]) = void\n", xfer,
+		xfer->ep->hcpriv);
+	return result;
+
+error_seg_submit:
+	__wa_xfer_abort(xfer);
+	spin_unlock_irqrestore(&rpipe->seg_lock, flags);
+	d_fnend(3, dev, "(xfer %p [rpipe %p]) = void\n", xfer,
+		xfer->ep->hcpriv);
+	return result;
+}
+
+/*
+ * Second part of a URB/transfer enqueuement
+ *
+ * Assumes this comes from wa_urb_enqueue() [maybe through
+ * wa_urb_enqueue_run()]. At this point:
+ *
+ * xfer->wa	filled and refcounted
+ * xfer->ep	filled with rpipe refcounted if
+ *              delayed == 0
+ * xfer->urb 	filled and refcounted (this is the case when called
+ *              from wa_urb_enqueue() as we come from usb_submit_urb()
+ *              and when called by wa_urb_enqueue_run(), as we took an
+ *              extra ref dropped by _run() after we return).
+ * xfer->gfp	filled
+ *
+ * If we fail at __wa_xfer_submit(), then we just check if we are done
+ * and if so, we run the completion procedure. However, if we are not
+ * yet done, we do nothing and wait for the completion handlers from
+ * the submitted URBs or from the xfer-result path to kick in. If xfer
+ * result never kicks in, the xfer will timeout from the USB code and
+ * dequeue() will be called.
+ */
+static void wa_urb_enqueue_b(struct wa_xfer *xfer)
+{
+	int result;
+	unsigned long flags;
+	struct urb *urb = xfer->urb;
+	struct wahc *wa = xfer->wa;
+	struct wusbhc *wusbhc = wa->wusb;
+	struct device *dev = &wa->usb_iface->dev;
+	struct wusb_dev *wusb_dev;
+	unsigned done;
+
+	d_fnstart(3, dev, "(wa %p urb %p)\n", wa, urb);
+	result = rpipe_get_by_ep(wa, xfer->ep, urb, xfer->gfp);
+	if (result < 0)
+		goto error_rpipe_get;
+	result = -ENODEV;
+	/* FIXME: segmentation broken -- kills DWA */
+	mutex_lock(&wusbhc->mutex);		/* get a WUSB dev */
+	if (urb->dev == NULL)
+		goto error_dev_gone;
+	wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, urb->dev);
+	if (wusb_dev == NULL) {
+		mutex_unlock(&wusbhc->mutex);
+		goto error_dev_gone;
+	}
+	mutex_unlock(&wusbhc->mutex);
+
+	spin_lock_irqsave(&xfer->lock, flags);
+	xfer->wusb_dev = wusb_dev;
+	result = urb->status;
+	if (urb->status != -EINPROGRESS)
+		goto error_dequeued;
+
+	result = __wa_xfer_setup(xfer, urb);
+	if (result < 0)
+		goto error_xfer_setup;
+	result = __wa_xfer_submit(xfer);
+	if (result < 0)
+		goto error_xfer_submit;
+	spin_unlock_irqrestore(&xfer->lock, flags);
+	d_fnend(3, dev, "(wa %p urb %p) = void\n", wa, urb);
+	return;
+
+	/* this is basically wa_xfer_completion() broken up wa_xfer_giveback()
+	 * does a wa_xfer_put() that will call wa_xfer_destroy() and clean
+	 * upundo setup().
+	 */
+error_xfer_setup:
+error_dequeued:
+	spin_unlock_irqrestore(&xfer->lock, flags);
+	/* FIXME: segmentation broken, kills DWA */
+	if (wusb_dev)
+		wusb_dev_put(wusb_dev);
+error_dev_gone:
+	rpipe_put(xfer->ep->hcpriv);
+error_rpipe_get:
+	xfer->result = result;
+	wa_xfer_giveback(xfer);
+	d_fnend(3, dev, "(wa %p urb %p) = (void) %d\n", wa, urb, result);
+	return;
+
+error_xfer_submit:
+	done = __wa_xfer_is_done(xfer);
+	xfer->result = result;
+	spin_unlock_irqrestore(&xfer->lock, flags);
+	if (done)
+		wa_xfer_completion(xfer);
+	d_fnend(3, dev, "(wa %p urb %p) = (void) %d\n", wa, urb, result);
+	return;
+}
+
+/*
+ * Execute the delayed transfers in the Wire Adapter @wa
+ *
+ * We need to be careful here, as dequeue() could be called in the
+ * middle.  That's why we do the whole thing under the
+ * wa->xfer_list_lock. If dequeue() jumps in, it first locks urb->lock
+ * and then checks the list -- so as we would be acquiring in inverse
+ * order, we just drop the lock once we have the xfer and reacquire it
+ * later.
+ */
+void wa_urb_enqueue_run(struct work_struct *ws)
+{
+	struct wahc *wa = container_of(ws, struct wahc, xfer_work);
+	struct device *dev = &wa->usb_iface->dev;
+	struct wa_xfer *xfer, *next;
+	struct urb *urb;
+
+	d_fnstart(3, dev, "(wa %p)\n", wa);
+	spin_lock_irq(&wa->xfer_list_lock);
+	list_for_each_entry_safe(xfer, next, &wa->xfer_delayed_list,
+				 list_node) {
+		list_del_init(&xfer->list_node);
+		spin_unlock_irq(&wa->xfer_list_lock);
+
+		urb = xfer->urb;
+		wa_urb_enqueue_b(xfer);
+		usb_put_urb(urb);	/* taken when queuing */
+
+		spin_lock_irq(&wa->xfer_list_lock);
+	}
+	spin_unlock_irq(&wa->xfer_list_lock);
+	d_fnend(3, dev, "(wa %p) = void\n", wa);
+}
+EXPORT_SYMBOL_GPL(wa_urb_enqueue_run);
+
+/*
+ * Submit a transfer to the Wire Adapter in a delayed way
+ *
+ * The process of enqueuing involves possible sleeps() [see
+ * enqueue_b(), for the rpipe_get() and the mutex_lock()]. If we are
+ * in an atomic section, we defer the enqueue_b() call--else we call direct.
+ *
+ * @urb: We own a reference to it done by the HCI Linux USB stack that
+ *       will be given up by calling usb_hcd_giveback_urb() or by
+ *       returning error from this function -> ergo we don't have to
+ *       refcount it.
+ */
+int wa_urb_enqueue(struct wahc *wa, struct usb_host_endpoint *ep,
+		   struct urb *urb, gfp_t gfp)
+{
+	int result;
+	struct device *dev = &wa->usb_iface->dev;
+	struct wa_xfer *xfer;
+	unsigned long my_flags;
+	unsigned cant_sleep = irqs_disabled() | in_atomic();
+
+	d_fnstart(3, dev, "(wa %p ep %p urb %p [%d] gfp 0x%x)\n",
+		  wa, ep, urb, urb->transfer_buffer_length, gfp);
+
+	if (urb->transfer_buffer == NULL
+	    && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)
+	    && urb->transfer_buffer_length != 0) {
+		dev_err(dev, "BUG? urb %p: NULL xfer buffer & NODMA\n", urb);
+		dump_stack();
+	}
+
+	result = -ENOMEM;
+	xfer = kzalloc(sizeof(*xfer), gfp);
+	if (xfer == NULL)
+		goto error_kmalloc;
+
+	result = -ENOENT;
+	if (urb->status != -EINPROGRESS)	/* cancelled */
+		goto error_dequeued;		/* before starting? */
+	wa_xfer_init(xfer);
+	xfer->wa = wa_get(wa);
+	xfer->urb = urb;
+	xfer->gfp = gfp;
+	xfer->ep = ep;
+	urb->hcpriv = xfer;
+	d_printf(2, dev, "xfer %p urb %p pipe 0x%02x [%d bytes] %s %s %s\n",
+		 xfer, urb, urb->pipe, urb->transfer_buffer_length,
+		 urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP ? "dma" : "nodma",
+		 urb->pipe & USB_DIR_IN ? "inbound" : "outbound",
+		 cant_sleep ? "deferred" : "inline");
+	if (cant_sleep) {
+		usb_get_urb(urb);
+		spin_lock_irqsave(&wa->xfer_list_lock, my_flags);
+		list_add_tail(&xfer->list_node, &wa->xfer_delayed_list);
+		spin_unlock_irqrestore(&wa->xfer_list_lock, my_flags);
+		queue_work(wusbd, &wa->xfer_work);
+	} else {
+		wa_urb_enqueue_b(xfer);
+	}
+	d_fnend(3, dev, "(wa %p ep %p urb %p [%d] gfp 0x%x) = 0\n",
+		wa, ep, urb, urb->transfer_buffer_length, gfp);
+	return 0;
+
+error_dequeued:
+	kfree(xfer);
+error_kmalloc:
+	d_fnend(3, dev, "(wa %p ep %p urb %p [%d] gfp 0x%x) = %d\n",
+		wa, ep, urb, urb->transfer_buffer_length, gfp, result);
+	return result;
+}
+EXPORT_SYMBOL_GPL(wa_urb_enqueue);
+
+/*
+ * Dequeue a URB and make sure uwb_hcd_giveback_urb() [completion
+ * handler] is called.
+ *
+ * Until a transfer goes successfully through wa_urb_enqueue() it
+ * needs to be dequeued with completion calling; when stuck in delayed
+ * or before wa_xfer_setup() is called, we need to do completion.
+ *
+ *  not setup  If there is no hcpriv yet, that means that that enqueue
+ *             still had no time to set the xfer up. Because
+ *             urb->status should be other than -EINPROGRESS,
+ *             enqueue() will catch that and bail out.
+ *
+ * If the transfer has gone through setup, we just need to clean it
+ * up. If it has gone through submit(), we have to abort it [with an
+ * asynch request] and then make sure we cancel each segment.
+ *
+ */
+int wa_urb_dequeue(struct wahc *wa, struct urb *urb)
+{
+	struct device *dev = &wa->usb_iface->dev;
+	unsigned long flags, flags2;
+	struct wa_xfer *xfer;
+	struct wa_seg *seg;
+	struct wa_rpipe *rpipe;
+	unsigned cnt;
+	unsigned rpipe_ready = 0;
+
+	d_fnstart(3, dev, "(wa %p, urb %p)\n", wa, urb);
+
+	d_printf(1, dev, "xfer %p urb %p: aborting\n", urb->hcpriv, urb);
+	xfer = urb->hcpriv;
+	if (xfer == NULL) {
+		/* NOthing setup yet enqueue will see urb->status !=
+		 * -EINPROGRESS (by hcd layer) and bail out with
+		 * error, no need to do completion
+		 */
+		BUG_ON(urb->status == -EINPROGRESS);
+		goto out;
+	}
+	spin_lock_irqsave(&xfer->lock, flags);
+	rpipe = xfer->ep->hcpriv;
+	/* Check the delayed list -> if there, release and complete */
+	spin_lock_irqsave(&wa->xfer_list_lock, flags2);
+	if (!list_empty(&xfer->list_node) && xfer->seg == NULL)
+		goto dequeue_delayed;
+	spin_unlock_irqrestore(&wa->xfer_list_lock, flags2);
+	if (xfer->seg == NULL)  	/* still hasn't reached */
+		goto out_unlock;	/* setup(), enqueue_b() completes */
+	/* Ok, the xfer is in flight already, it's been setup and submitted.*/
+	__wa_xfer_abort(xfer);
+	for (cnt = 0; cnt < xfer->segs; cnt++) {
+		seg = xfer->seg[cnt];
+		switch (seg->status) {
+		case WA_SEG_NOTREADY:
+		case WA_SEG_READY:
+			printk(KERN_ERR "xfer %p#%u: dequeue bad state %u\n",
+			       xfer, cnt, seg->status);
+			WARN_ON(1);
+			break;
+		case WA_SEG_DELAYED:
+			seg->status = WA_SEG_ABORTED;
+			spin_lock_irqsave(&rpipe->seg_lock, flags2);
+			list_del(&seg->list_node);
+			xfer->segs_done++;
+			rpipe_ready = rpipe_avail_inc(rpipe);
+			spin_unlock_irqrestore(&rpipe->seg_lock, flags2);
+			break;
+		case WA_SEG_SUBMITTED:
+			seg->status = WA_SEG_ABORTED;
+			usb_unlink_urb(&seg->urb);
+			if (xfer->is_inbound == 0)
+				usb_unlink_urb(seg->dto_urb);
+			xfer->segs_done++;
+			rpipe_ready = rpipe_avail_inc(rpipe);
+			break;
+		case WA_SEG_PENDING:
+			seg->status = WA_SEG_ABORTED;
+			xfer->segs_done++;
+			rpipe_ready = rpipe_avail_inc(rpipe);
+			break;
+		case WA_SEG_DTI_PENDING:
+			usb_unlink_urb(wa->dti_urb);
+			seg->status = WA_SEG_ABORTED;
+			xfer->segs_done++;
+			rpipe_ready = rpipe_avail_inc(rpipe);
+			break;
+		case WA_SEG_DONE:
+		case WA_SEG_ERROR:
+		case WA_SEG_ABORTED:
+			break;
+		}
+	}
+	xfer->result = urb->status;	/* -ENOENT or -ECONNRESET */
+	__wa_xfer_is_done(xfer);
+	spin_unlock_irqrestore(&xfer->lock, flags);
+	wa_xfer_completion(xfer);
+	if (rpipe_ready)
+		wa_xfer_delayed_run(rpipe);
+	d_fnend(3, dev, "(wa %p, urb %p) = 0\n", wa, urb);
+	return 0;
+
+out_unlock:
+	spin_unlock_irqrestore(&xfer->lock, flags);
+out:
+	d_fnend(3, dev, "(wa %p, urb %p) = 0\n", wa, urb);
+	return 0;
+
+dequeue_delayed:
+	list_del_init(&xfer->list_node);
+	spin_unlock_irqrestore(&wa->xfer_list_lock, flags2);
+	xfer->result = urb->status;
+	spin_unlock_irqrestore(&xfer->lock, flags);
+	wa_xfer_giveback(xfer);
+	usb_put_urb(urb);		/* we got a ref in enqueue() */
+	d_fnend(3, dev, "(wa %p, urb %p) = 0\n", wa, urb);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(wa_urb_dequeue);
+
+/*
+ * Translation from WA status codes (WUSB1.0 Table 8.15) to errno
+ * codes
+ *
+ * Positive errno values are internal inconsistencies and should be
+ * flagged louder. Negative are to be passed up to the user in the
+ * normal way.
+ *
+ * @status: USB WA status code -- high two bits are stripped.
+ */
+static int wa_xfer_status_to_errno(u8 status)
+{
+	int errno;
+	u8 real_status = status;
+	static int xlat[] = {
+		[WA_XFER_STATUS_SUCCESS] = 		0,
+		[WA_XFER_STATUS_HALTED] = 		-EPIPE,
+		[WA_XFER_STATUS_DATA_BUFFER_ERROR] = 	-ENOBUFS,
+		[WA_XFER_STATUS_BABBLE] = 		-EOVERFLOW,
+		[WA_XFER_RESERVED] = 			EINVAL,
+		[WA_XFER_STATUS_NOT_FOUND] =		0,
+		[WA_XFER_STATUS_INSUFFICIENT_RESOURCE] = -ENOMEM,
+		[WA_XFER_STATUS_TRANSACTION_ERROR] = 	-EILSEQ,
+		[WA_XFER_STATUS_ABORTED] = 		-EINTR,
+		[WA_XFER_STATUS_RPIPE_NOT_READY] = 	EINVAL,
+		[WA_XFER_INVALID_FORMAT] = 		EINVAL,
+		[WA_XFER_UNEXPECTED_SEGMENT_NUMBER] = 	EINVAL,
+		[WA_XFER_STATUS_RPIPE_TYPE_MISMATCH] = 	EINVAL,
+	};
+	status &= 0x3f;
+
+	if (status == 0)
+		return 0;
+	if (status >= ARRAY_SIZE(xlat)) {
+		if (printk_ratelimit())
+			printk(KERN_ERR "%s(): BUG? "
+			       "Unknown WA transfer status 0x%02x\n",
+			       __func__, real_status);
+		return -EINVAL;
+	}
+	errno = xlat[status];
+	if (unlikely(errno > 0)) {
+		if (printk_ratelimit())
+			printk(KERN_ERR "%s(): BUG? "
+			       "Inconsistent WA status: 0x%02x\n",
+			       __func__, real_status);
+		errno = -errno;
+	}
+	return errno;
+}
+
+/*
+ * Process a xfer result completion message
+ *
+ * inbound transfers: need to schedule a DTI read
+ *
+ * FIXME: this functio needs to be broken up in parts
+ */
+static void wa_xfer_result_chew(struct wahc *wa, struct wa_xfer *xfer)
+{
+	int result;
+	struct device *dev = &wa->usb_iface->dev;
+	unsigned long flags;
+	u8 seg_idx;
+	struct wa_seg *seg;
+	struct wa_rpipe *rpipe;
+	struct wa_xfer_result *xfer_result = wa->xfer_result;
+	u8 done = 0;
+	u8 usb_status;
+	unsigned rpipe_ready = 0;
+
+	d_fnstart(3, dev, "(wa %p xfer %p)\n", wa, xfer);
+	spin_lock_irqsave(&xfer->lock, flags);
+	seg_idx = xfer_result->bTransferSegment & 0x7f;
+	if (unlikely(seg_idx >= xfer->segs))
+		goto error_bad_seg;
+	seg = xfer->seg[seg_idx];
+	rpipe = xfer->ep->hcpriv;
+	usb_status = xfer_result->bTransferStatus;
+	d_printf(2, dev, "xfer %p#%u: bTransferStatus 0x%02x (seg %u)\n",
+		 xfer, seg_idx, usb_status, seg->status);
+	if (seg->status == WA_SEG_ABORTED
+	    || seg->status == WA_SEG_ERROR)	/* already handled */
+		goto segment_aborted;
+	if (seg->status == WA_SEG_SUBMITTED)	/* ops, got here */
+		seg->status = WA_SEG_PENDING;	/* before wa_seg{_dto}_cb() */
+	if (seg->status != WA_SEG_PENDING) {
+		if (printk_ratelimit())
+			dev_err(dev, "xfer %p#%u: Bad segment state %u\n",
+				xfer, seg_idx, seg->status);
+		seg->status = WA_SEG_PENDING;	/* workaround/"fix" it */
+	}
+	if (usb_status & 0x80) {
+		seg->result = wa_xfer_status_to_errno(usb_status);
+		dev_err(dev, "DTI: xfer %p#%u failed (0x%02x)\n",
+			xfer, seg->index, usb_status);
+		goto error_complete;
+	}
+	/* FIXME: we ignore warnings, tally them for stats */
+	if (usb_status & 0x40) 		/* Warning?... */
+		usb_status = 0;		/* ... pass */
+	if (xfer->is_inbound) {	/* IN data phase: read to buffer */
+		seg->status = WA_SEG_DTI_PENDING;
+		BUG_ON(wa->buf_in_urb->status == -EINPROGRESS);
+		if (xfer->is_dma) {
+			wa->buf_in_urb->transfer_dma =
+				xfer->urb->transfer_dma
+				+ seg_idx * xfer->seg_size;
+			wa->buf_in_urb->transfer_flags
+				|= URB_NO_TRANSFER_DMA_MAP;
+		} else {
+			wa->buf_in_urb->transfer_buffer =
+				xfer->urb->transfer_buffer
+				+ seg_idx * xfer->seg_size;
+			wa->buf_in_urb->transfer_flags
+				&= ~URB_NO_TRANSFER_DMA_MAP;
+		}
+		wa->buf_in_urb->transfer_buffer_length =
+			le32_to_cpu(xfer_result->dwTransferLength);
+		wa->buf_in_urb->context = seg;
+		result = usb_submit_urb(wa->buf_in_urb, GFP_ATOMIC);
+		if (result < 0)
+			goto error_submit_buf_in;
+	} else {
+		/* OUT data phase, complete it -- */
+		seg->status = WA_SEG_DONE;
+		seg->result = le32_to_cpu(xfer_result->dwTransferLength);
+		xfer->segs_done++;
+		rpipe_ready = rpipe_avail_inc(rpipe);
+		done = __wa_xfer_is_done(xfer);
+	}
+	spin_unlock_irqrestore(&xfer->lock, flags);
+	if (done)
+		wa_xfer_completion(xfer);
+	if (rpipe_ready)
+		wa_xfer_delayed_run(rpipe);
+	d_fnend(3, dev, "(wa %p xfer %p) = void\n", wa, xfer);
+	return;
+
+
+error_submit_buf_in:
+	if (edc_inc(&wa->dti_edc, EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)) {
+		dev_err(dev, "DTI: URB max acceptable errors "
+			"exceeded, resetting device\n");
+		wa_reset_all(wa);
+	}
+	if (printk_ratelimit())
+		dev_err(dev, "xfer %p#%u: can't submit DTI data phase: %d\n",
+			xfer, seg_idx, result);
+	seg->result = result;
+error_complete:
+	seg->status = WA_SEG_ERROR;
+	xfer->segs_done++;
+	rpipe_ready = rpipe_avail_inc(rpipe);
+	__wa_xfer_abort(xfer);
+	done = __wa_xfer_is_done(xfer);
+	spin_unlock_irqrestore(&xfer->lock, flags);
+	if (done)
+		wa_xfer_completion(xfer);
+	if (rpipe_ready)
+		wa_xfer_delayed_run(rpipe);
+	d_fnend(3, dev, "(wa %p xfer %p) = void [segment/DTI-submit error]\n",
+		wa, xfer);
+	return;
+
+
+error_bad_seg:
+	spin_unlock_irqrestore(&xfer->lock, flags);
+	wa_urb_dequeue(wa, xfer->urb);
+	if (printk_ratelimit())
+		dev_err(dev, "xfer %p#%u: bad segment\n", xfer, seg_idx);
+	if (edc_inc(&wa->dti_edc, EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)) {
+		dev_err(dev, "DTI: URB max acceptable errors "
+			"exceeded, resetting device\n");
+		wa_reset_all(wa);
+	}
+	d_fnend(3, dev, "(wa %p xfer %p) = void [bad seg]\n", wa, xfer);
+	return;
+
+
+segment_aborted:
+	/* nothing to do, as the aborter did the completion */
+	spin_unlock_irqrestore(&xfer->lock, flags);
+	d_fnend(3, dev, "(wa %p xfer %p) = void [segment aborted]\n",
+		wa, xfer);
+	return;
+
+}
+
+/*
+ * Callback for the IN data phase
+ *
+ * If succesful transition state; otherwise, take a note of the
+ * error, mark this segment done and try completion.
+ *
+ * Note we don't access until we are sure that the transfer hasn't
+ * been cancelled (ECONNRESET, ENOENT), which could mean that
+ * seg->xfer could be already gone.
+ */
+static void wa_buf_in_cb(struct urb *urb)
+{
+	struct wa_seg *seg = urb->context;
+	struct wa_xfer *xfer = seg->xfer;
+	struct wahc *wa;
+	struct device *dev;
+	struct wa_rpipe *rpipe;
+	unsigned rpipe_ready;
+	unsigned long flags;
+	u8 done = 0;
+
+	d_fnstart(3, NULL, "(urb %p [%d])\n", urb, urb->status);
+	switch (urb->status) {
+	case 0:
+		spin_lock_irqsave(&xfer->lock, flags);
+		wa = xfer->wa;
+		dev = &wa->usb_iface->dev;
+		rpipe = xfer->ep->hcpriv;
+		d_printf(2, dev, "xfer %p#%u: data in done (%zu bytes)\n",
+			   xfer, seg->index, (size_t)urb->actual_length);
+		seg->status = WA_SEG_DONE;
+		seg->result = urb->actual_length;
+		xfer->segs_done++;
+		rpipe_ready = rpipe_avail_inc(rpipe);
+		done = __wa_xfer_is_done(xfer);
+		spin_unlock_irqrestore(&xfer->lock, flags);
+		if (done)
+			wa_xfer_completion(xfer);
+		if (rpipe_ready)
+			wa_xfer_delayed_run(rpipe);
+		break;
+	case -ECONNRESET:	/* URB unlinked; no need to do anything */
+	case -ENOENT:		/* as it was done by the who unlinked us */
+		break;
+	default:		/* Other errors ... */
+		spin_lock_irqsave(&xfer->lock, flags);
+		wa = xfer->wa;
+		dev = &wa->usb_iface->dev;
+		rpipe = xfer->ep->hcpriv;
+		if (printk_ratelimit())
+			dev_err(dev, "xfer %p#%u: data in error %d\n",
+				xfer, seg->index, urb->status);
+		if (edc_inc(&wa->nep_edc, EDC_MAX_ERRORS,
+			    EDC_ERROR_TIMEFRAME)){
+			dev_err(dev, "DTO: URB max acceptable errors "
+				"exceeded, resetting device\n");
+			wa_reset_all(wa);
+		}
+		seg->status = WA_SEG_ERROR;
+		seg->result = urb->status;
+		xfer->segs_done++;
+		rpipe_ready = rpipe_avail_inc(rpipe);
+		__wa_xfer_abort(xfer);
+		done = __wa_xfer_is_done(xfer);
+		spin_unlock_irqrestore(&xfer->lock, flags);
+		if (done)
+			wa_xfer_completion(xfer);
+		if (rpipe_ready)
+			wa_xfer_delayed_run(rpipe);
+	}
+	d_fnend(3, NULL, "(urb %p [%d]) = void\n", urb, urb->status);
+}
+
+/*
+ * Handle an incoming transfer result buffer
+ *
+ * Given a transfer result buffer, it completes the transfer (possibly
+ * scheduling and buffer in read) and then resubmits the DTI URB for a
+ * new transfer result read.
+ *
+ *
+ * The xfer_result DTI URB state machine
+ *
+ * States: OFF | RXR (Read-Xfer-Result) | RBI (Read-Buffer-In)
+ *
+ * We start in OFF mode, the first xfer_result notification [through
+ * wa_handle_notif_xfer()] moves us to RXR by posting the DTI-URB to
+ * read.
+ *
+ * We receive a buffer -- if it is not a xfer_result, we complain and
+ * repost the DTI-URB. If it is a xfer_result then do the xfer seg
+ * request accounting. If it is an IN segment, we move to RBI and post
+ * a BUF-IN-URB to the right buffer. The BUF-IN-URB callback will
+ * repost the DTI-URB and move to RXR state. if there was no IN
+ * segment, it will repost the DTI-URB.
+ *
+ * We go back to OFF when we detect a ENOENT or ESHUTDOWN (or too many
+ * errors) in the URBs.
+ */
+static void wa_xfer_result_cb(struct urb *urb)
+{
+	int result;
+	struct wahc *wa = urb->context;
+	struct device *dev = &wa->usb_iface->dev;
+	struct wa_xfer_result *xfer_result;
+	u32 xfer_id;
+	struct wa_xfer *xfer;
+	u8 usb_status;
+
+	d_fnstart(3, dev, "(%p)\n", wa);
+	BUG_ON(wa->dti_urb != urb);
+	switch (wa->dti_urb->status) {
+	case 0:
+		/* We have a xfer result buffer; check it */
+		d_printf(2, dev, "DTI: xfer result %d bytes at %p\n",
+			   urb->actual_length, urb->transfer_buffer);
+		d_dump(3, dev, urb->transfer_buffer, urb->actual_length);
+		if (wa->dti_urb->actual_length != sizeof(*xfer_result)) {
+			dev_err(dev, "DTI Error: xfer result--bad size "
+				"xfer result (%d bytes vs %zu needed)\n",
+				urb->actual_length, sizeof(*xfer_result));
+			break;
+		}
+		xfer_result = wa->xfer_result;
+		if (xfer_result->hdr.bLength != sizeof(*xfer_result)) {
+			dev_err(dev, "DTI Error: xfer result--"
+				"bad header length %u\n",
+				xfer_result->hdr.bLength);
+			break;
+		}
+		if (xfer_result->hdr.bNotifyType != WA_XFER_RESULT) {
+			dev_err(dev, "DTI Error: xfer result--"
+				"bad header type 0x%02x\n",
+				xfer_result->hdr.bNotifyType);
+			break;
+		}
+		usb_status = xfer_result->bTransferStatus & 0x3f;
+		if (usb_status == WA_XFER_STATUS_ABORTED
+		    || usb_status == WA_XFER_STATUS_NOT_FOUND)
+			/* taken care of already */
+			break;
+		xfer_id = xfer_result->dwTransferID;
+		xfer = wa_xfer_get_by_id(wa, xfer_id);
+		if (xfer == NULL) {
+			/* FIXME: transaction might have been cancelled */
+			dev_err(dev, "DTI Error: xfer result--"
+				"unknown xfer 0x%08x (status 0x%02x)\n",
+				xfer_id, usb_status);
+			break;
+		}
+		wa_xfer_result_chew(wa, xfer);
+		wa_xfer_put(xfer);
+		break;
+	case -ENOENT:		/* (we killed the URB)...so, no broadcast */
+	case -ESHUTDOWN:	/* going away! */
+		dev_dbg(dev, "DTI: going down! %d\n", urb->status);
+		goto out;
+	default:
+		/* Unknown error */
+		if (edc_inc(&wa->dti_edc, EDC_MAX_ERRORS,
+			    EDC_ERROR_TIMEFRAME)) {
+			dev_err(dev, "DTI: URB max acceptable errors "
+				"exceeded, resetting device\n");
+			wa_reset_all(wa);
+			goto out;
+		}
+		if (printk_ratelimit())
+			dev_err(dev, "DTI: URB error %d\n", urb->status);
+		break;
+	}
+	/* Resubmit the DTI URB */
+	result = usb_submit_urb(wa->dti_urb, GFP_ATOMIC);
+	if (result < 0) {
+		dev_err(dev, "DTI Error: Could not submit DTI URB (%d), "
+			"resetting\n", result);
+		wa_reset_all(wa);
+	}
+out:
+	d_fnend(3, dev, "(%p) = void\n", wa);
+	return;
+}
+
+/*
+ * Transfer complete notification
+ *
+ * Called from the notif.c code. We get a notification on EP2 saying
+ * that some endpoint has some transfer result data available. We are
+ * about to read it.
+ *
+ * To speed up things, we always have a URB reading the DTI URB; we
+ * don't really set it up and start it until the first xfer complete
+ * notification arrives, which is what we do here.
+ *
+ * Follow up in wa_xfer_result_cb(), as that's where the whole state
+ * machine starts.
+ *
+ * So here we just initialize the DTI URB for reading transfer result
+ * notifications and also the buffer-in URB, for reading buffers. Then
+ * we just submit the DTI URB.
+ *
+ * @wa shall be referenced
+ */
+void wa_handle_notif_xfer(struct wahc *wa, struct wa_notif_hdr *notif_hdr)
+{
+	int result;
+	struct device *dev = &wa->usb_iface->dev;
+	struct wa_notif_xfer *notif_xfer;
+	const struct usb_endpoint_descriptor *dti_epd = wa->dti_epd;
+
+	d_fnstart(4, dev, "(%p, %p)\n", wa, notif_hdr);
+	notif_xfer = container_of(notif_hdr, struct wa_notif_xfer, hdr);
+	BUG_ON(notif_hdr->bNotifyType != WA_NOTIF_TRANSFER);
+
+	if ((0x80 | notif_xfer->bEndpoint) != dti_epd->bEndpointAddress) {
+		/* FIXME: hardcoded limitation, adapt */
+		dev_err(dev, "BUG: DTI ep is %u, not %u (hack me)\n",
+			notif_xfer->bEndpoint, dti_epd->bEndpointAddress);
+		goto error;
+	}
+	if (wa->dti_urb != NULL)	/* DTI URB already started */
+		goto out;
+
+	wa->dti_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (wa->dti_urb == NULL) {
+		dev_err(dev, "Can't allocate DTI URB\n");
+		goto error_dti_urb_alloc;
+	}
+	usb_fill_bulk_urb(
+		wa->dti_urb, wa->usb_dev,
+		usb_rcvbulkpipe(wa->usb_dev, 0x80 | notif_xfer->bEndpoint),
+		wa->xfer_result, wa->xfer_result_size,
+		wa_xfer_result_cb, wa);
+
+	wa->buf_in_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (wa->buf_in_urb == NULL) {
+		dev_err(dev, "Can't allocate BUF-IN URB\n");
+		goto error_buf_in_urb_alloc;
+	}
+	usb_fill_bulk_urb(
+		wa->buf_in_urb, wa->usb_dev,
+		usb_rcvbulkpipe(wa->usb_dev, 0x80 | notif_xfer->bEndpoint),
+		NULL, 0, wa_buf_in_cb, wa);
+	result = usb_submit_urb(wa->dti_urb, GFP_KERNEL);
+	if (result < 0) {
+		dev_err(dev, "DTI Error: Could not submit DTI URB (%d), "
+			"resetting\n", result);
+		goto error_dti_urb_submit;
+	}
+out:
+	d_fnend(4, dev, "(%p, %p) = void\n", wa, notif_hdr);
+	return;
+
+error_dti_urb_submit:
+	usb_put_urb(wa->buf_in_urb);
+error_buf_in_urb_alloc:
+	usb_put_urb(wa->dti_urb);
+	wa->dti_urb = NULL;
+error_dti_urb_alloc:
+error:
+	wa_reset_all(wa);
+	d_fnend(4, dev, "(%p, %p) = void\n", wa, notif_hdr);
+	return;
+}
diff --git a/drivers/usb/wusbcore/wusbhc.c b/drivers/usb/wusbcore/wusbhc.c
new file mode 100644
index 0000000..07c63a3
--- /dev/null
+++ b/drivers/usb/wusbcore/wusbhc.c
@@ -0,0 +1,418 @@
+/*
+ * Wireless USB Host Controller
+ * sysfs glue, wusbcore module support and life cycle management
+ *
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * Creation/destruction of wusbhc is split in two parts; that that
+ * doesn't require the HCD to be added (wusbhc_{create,destroy}) and
+ * the one that requires (phase B, wusbhc_b_{create,destroy}).
+ *
+ * This is so because usb_add_hcd() will start the HC, and thus, all
+ * the HC specific stuff has to be already initialiazed (like sysfs
+ * thingies).
+ */
+#include <linux/device.h>
+#include <linux/module.h>
+#include "wusbhc.h"
+
+/**
+ * Extract the wusbhc that corresponds to a USB Host Controller class device
+ *
+ * WARNING! Apply only if @dev is that of a
+ *          wusbhc.usb_hcd.self->class_dev; otherwise, you loose.
+ */
+static struct wusbhc *usbhc_dev_to_wusbhc(struct device *dev)
+{
+	struct usb_bus *usb_bus = dev_get_drvdata(dev);
+	struct usb_hcd *usb_hcd = bus_to_hcd(usb_bus);
+	return usb_hcd_to_wusbhc(usb_hcd);
+}
+
+/*
+ * Show & store the current WUSB trust timeout
+ *
+ * We don't do locking--it is an 'atomic' value.
+ *
+ * The units that we store/show are always MILLISECONDS. However, the
+ * value of trust_timeout is jiffies.
+ */
+static ssize_t wusb_trust_timeout_show(struct device *dev,
+				       struct device_attribute *attr, char *buf)
+{
+	struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev);
+
+	return scnprintf(buf, PAGE_SIZE, "%u\n", wusbhc->trust_timeout);
+}
+
+static ssize_t wusb_trust_timeout_store(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf, size_t size)
+{
+	struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev);
+	ssize_t result = -ENOSYS;
+	unsigned trust_timeout;
+
+	result = sscanf(buf, "%u", &trust_timeout);
+	if (result != 1) {
+		result = -EINVAL;
+		goto out;
+	}
+	/* FIXME: maybe we should check for range validity? */
+	wusbhc->trust_timeout = trust_timeout;
+	cancel_delayed_work(&wusbhc->keep_alive_timer);
+	flush_workqueue(wusbd);
+	queue_delayed_work(wusbd, &wusbhc->keep_alive_timer,
+			   (trust_timeout * CONFIG_HZ)/1000/2);
+out:
+	return result < 0 ? result : size;
+}
+static DEVICE_ATTR(wusb_trust_timeout, 0644, wusb_trust_timeout_show,
+					     wusb_trust_timeout_store);
+
+/*
+ * Show & store the current WUSB CHID
+ */
+static ssize_t wusb_chid_show(struct device *dev,
+			      struct device_attribute *attr, char *buf)
+{
+	struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev);
+	ssize_t result = 0;
+
+	if (wusbhc->wuie_host_info != NULL)
+		result += ckhdid_printf(buf, PAGE_SIZE,
+					&wusbhc->wuie_host_info->CHID);
+	return result;
+}
+
+/*
+ * Store a new CHID
+ *
+ * This will (FIXME) trigger many changes.
+ *
+ * - Send an all zeros CHID and it will stop the controller
+ * - Send a non-zero CHID and it will start it
+ *   (unless it was started, it will just change the CHID,
+ *   diconnecting all devices first).
+ *
+ * So first we scan the MMC we are sent and then we act on it.  We
+ * read it in the same format as we print it, an ASCII string of 16
+ * hex bytes.
+ *
+ * See wusbhc_chid_set() for more info.
+ */
+static ssize_t wusb_chid_store(struct device *dev,
+			       struct device_attribute *attr,
+			       const char *buf, size_t size)
+{
+	struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev);
+	struct wusb_ckhdid chid;
+	ssize_t result;
+
+	result = sscanf(buf,
+			"%02hhx %02hhx %02hhx %02hhx "
+			"%02hhx %02hhx %02hhx %02hhx "
+			"%02hhx %02hhx %02hhx %02hhx "
+			"%02hhx %02hhx %02hhx %02hhx\n",
+			&chid.data[0] , &chid.data[1] ,
+			&chid.data[2] , &chid.data[3] ,
+			&chid.data[4] , &chid.data[5] ,
+			&chid.data[6] , &chid.data[7] ,
+			&chid.data[8] , &chid.data[9] ,
+			&chid.data[10], &chid.data[11],
+			&chid.data[12], &chid.data[13],
+			&chid.data[14], &chid.data[15]);
+	if (result != 16) {
+		dev_err(dev, "Unrecognized CHID (need 16 8-bit hex digits): "
+			"%d\n", (int)result);
+		return -EINVAL;
+	}
+	result = wusbhc_chid_set(wusbhc, &chid);
+	return result < 0 ? result : size;
+}
+static DEVICE_ATTR(wusb_chid, 0644, wusb_chid_show, wusb_chid_store);
+
+/* Group all the WUSBHC attributes */
+static struct attribute *wusbhc_attrs[] = {
+		&dev_attr_wusb_trust_timeout.attr,
+		&dev_attr_wusb_chid.attr,
+		NULL,
+};
+
+static struct attribute_group wusbhc_attr_group = {
+	.name = NULL,	/* we want them in the same directory */
+	.attrs = wusbhc_attrs,
+};
+
+/*
+ * Create a wusbhc instance
+ *
+ * NOTEs:
+ *
+ *  - assumes *wusbhc has been zeroed and wusbhc->usb_hcd has been
+ *    initialized but not added.
+ *
+ *  - fill out ports_max, mmcies_max and mmcie_{add,rm} before calling.
+ *
+ *  - fill out wusbhc->uwb_rc and refcount it before calling
+ *  - fill out the wusbhc->sec_modes array
+ */
+int wusbhc_create(struct wusbhc *wusbhc)
+{
+	int result = 0;
+
+	wusbhc->trust_timeout = WUSB_TRUST_TIMEOUT_MS;
+	mutex_init(&wusbhc->mutex);
+	result = wusbhc_mmcie_create(wusbhc);
+	if (result < 0)
+		goto error_mmcie_create;
+	result = wusbhc_devconnect_create(wusbhc);
+	if (result < 0)
+		goto error_devconnect_create;
+	result = wusbhc_rh_create(wusbhc);
+	if (result < 0)
+		goto error_rh_create;
+	result = wusbhc_sec_create(wusbhc);
+	if (result < 0)
+		goto error_sec_create;
+	return 0;
+
+error_sec_create:
+	wusbhc_rh_destroy(wusbhc);
+error_rh_create:
+	wusbhc_devconnect_destroy(wusbhc);
+error_devconnect_create:
+	wusbhc_mmcie_destroy(wusbhc);
+error_mmcie_create:
+	return result;
+}
+EXPORT_SYMBOL_GPL(wusbhc_create);
+
+static inline struct kobject *wusbhc_kobj(struct wusbhc *wusbhc)
+{
+	return &wusbhc->usb_hcd.self.controller->kobj;
+}
+
+/*
+ * Phase B of a wusbhc instance creation
+ *
+ * Creates fields that depend on wusbhc->usb_hcd having been
+ * added. This is where we create the sysfs files in
+ * /sys/class/usb_host/usb_hostX/.
+ *
+ * NOTE: Assumes wusbhc->usb_hcd has been already added by the upper
+ *       layer (hwahc or whci)
+ */
+int wusbhc_b_create(struct wusbhc *wusbhc)
+{
+	int result = 0;
+	struct device *dev = wusbhc->usb_hcd.self.controller;
+
+	result = sysfs_create_group(wusbhc_kobj(wusbhc), &wusbhc_attr_group);
+	if (result < 0) {
+		dev_err(dev, "Cannot register WUSBHC attributes: %d\n", result);
+		goto error_create_attr_group;
+	}
+
+	result = wusbhc_pal_register(wusbhc);
+	if (result < 0)
+		goto error_pal_register;
+	return 0;
+
+error_pal_register:
+	sysfs_remove_group(wusbhc_kobj(wusbhc), &wusbhc_attr_group);
+error_create_attr_group:
+	return result;
+}
+EXPORT_SYMBOL_GPL(wusbhc_b_create);
+
+void wusbhc_b_destroy(struct wusbhc *wusbhc)
+{
+	wusbhc_pal_unregister(wusbhc);
+	sysfs_remove_group(wusbhc_kobj(wusbhc), &wusbhc_attr_group);
+}
+EXPORT_SYMBOL_GPL(wusbhc_b_destroy);
+
+void wusbhc_destroy(struct wusbhc *wusbhc)
+{
+	wusbhc_sec_destroy(wusbhc);
+	wusbhc_rh_destroy(wusbhc);
+	wusbhc_devconnect_destroy(wusbhc);
+	wusbhc_mmcie_destroy(wusbhc);
+}
+EXPORT_SYMBOL_GPL(wusbhc_destroy);
+
+struct workqueue_struct *wusbd;
+EXPORT_SYMBOL_GPL(wusbd);
+
+/*
+ * WUSB Cluster ID allocation map
+ *
+ * Each WUSB bus in a channel is identified with a Cluster Id in the
+ * unauth address pace (WUSB1.0[4.3]). We take the range 0xe0 to 0xff
+ * (that's space for 31 WUSB controllers, as 0xff can't be taken). We
+ * start taking from 0xff, 0xfe, 0xfd... (hence the += or -= 0xff).
+ *
+ * For each one we taken, we pin it in the bitap
+ */
+#define CLUSTER_IDS 32
+static DECLARE_BITMAP(wusb_cluster_id_table, CLUSTER_IDS);
+static DEFINE_SPINLOCK(wusb_cluster_ids_lock);
+
+/*
+ * Get a WUSB Cluster ID
+ *
+ * Need to release with wusb_cluster_id_put() when done w/ it.
+ */
+/* FIXME: coordinate with the choose_addres() from the USB stack */
+/* we want to leave the top of the 128 range for cluster addresses and
+ * the bottom for device addresses (as we map them one on one with
+ * ports). */
+u8 wusb_cluster_id_get(void)
+{
+	u8 id;
+	spin_lock(&wusb_cluster_ids_lock);
+	id = find_first_zero_bit(wusb_cluster_id_table, CLUSTER_IDS);
+	if (id > CLUSTER_IDS) {
+		id = 0;
+		goto out;
+	}
+	set_bit(id, wusb_cluster_id_table);
+	id = (u8) 0xff - id;
+out:
+	spin_unlock(&wusb_cluster_ids_lock);
+	return id;
+
+}
+EXPORT_SYMBOL_GPL(wusb_cluster_id_get);
+
+/*
+ * Release a WUSB Cluster ID
+ *
+ * Obtained it with wusb_cluster_id_get()
+ */
+void wusb_cluster_id_put(u8 id)
+{
+	id = 0xff - id;
+	BUG_ON(id >= CLUSTER_IDS);
+	spin_lock(&wusb_cluster_ids_lock);
+	WARN_ON(!test_bit(id, wusb_cluster_id_table));
+	clear_bit(id, wusb_cluster_id_table);
+	spin_unlock(&wusb_cluster_ids_lock);
+}
+EXPORT_SYMBOL_GPL(wusb_cluster_id_put);
+
+/**
+ * wusbhc_giveback_urb - return an URB to the USB core
+ * @wusbhc: the host controller the URB is from.
+ * @urb:    the URB.
+ * @status: the URB's status.
+ *
+ * Return an URB to the USB core doing some additional WUSB specific
+ * processing.
+ *
+ *  - After a successful transfer, update the trust timeout timestamp
+ *    for the WUSB device.
+ *
+ *  - [WUSB] sections 4.13 and 7.5.1 specifies the stop retrasmittion
+ *    condition for the WCONNECTACK_IE is that the host has observed
+ *    the associated device responding to a control transfer.
+ */
+void wusbhc_giveback_urb(struct wusbhc *wusbhc, struct urb *urb, int status)
+{
+	struct wusb_dev *wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, urb->dev);
+
+	if (status == 0) {
+		wusb_dev->entry_ts = jiffies;
+
+		/* wusbhc_devconnect_acked() can't be called from from
+		   atomic context so defer it to a work queue. */
+		if (!list_empty(&wusb_dev->cack_node))
+			queue_work(wusbd, &wusb_dev->devconnect_acked_work);
+	}
+
+	usb_hcd_giveback_urb(&wusbhc->usb_hcd, urb, status);
+}
+EXPORT_SYMBOL_GPL(wusbhc_giveback_urb);
+
+/**
+ * wusbhc_reset_all - reset the HC hardware
+ * @wusbhc: the host controller to reset.
+ *
+ * Request a full hardware reset of the chip.  This will also reset
+ * the radio controller and any other PALs.
+ */
+void wusbhc_reset_all(struct wusbhc *wusbhc)
+{
+	uwb_rc_reset_all(wusbhc->uwb_rc);
+}
+EXPORT_SYMBOL_GPL(wusbhc_reset_all);
+
+static struct notifier_block wusb_usb_notifier = {
+	.notifier_call = wusb_usb_ncb,
+	.priority = INT_MAX	/* Need to be called first of all */
+};
+
+static int __init wusbcore_init(void)
+{
+	int result;
+	result = wusb_crypto_init();
+	if (result < 0)
+		goto error_crypto_init;
+	/* WQ is singlethread because we need to serialize notifications */
+	wusbd = create_singlethread_workqueue("wusbd");
+	if (wusbd == NULL) {
+		result = -ENOMEM;
+		printk(KERN_ERR "WUSB-core: Cannot create wusbd workqueue\n");
+		goto error_wusbd_create;
+	}
+	usb_register_notify(&wusb_usb_notifier);
+	bitmap_zero(wusb_cluster_id_table, CLUSTER_IDS);
+	set_bit(0, wusb_cluster_id_table);	/* reserve Cluster ID 0xff */
+	return 0;
+
+error_wusbd_create:
+	wusb_crypto_exit();
+error_crypto_init:
+	return result;
+
+}
+module_init(wusbcore_init);
+
+static void __exit wusbcore_exit(void)
+{
+	clear_bit(0, wusb_cluster_id_table);
+	if (!bitmap_empty(wusb_cluster_id_table, CLUSTER_IDS)) {
+		char buf[256];
+		bitmap_scnprintf(buf, sizeof(buf), wusb_cluster_id_table,
+				 CLUSTER_IDS);
+		printk(KERN_ERR "BUG: WUSB Cluster IDs not released "
+		       "on exit: %s\n", buf);
+		WARN_ON(1);
+	}
+	usb_unregister_notify(&wusb_usb_notifier);
+	destroy_workqueue(wusbd);
+	wusb_crypto_exit();
+}
+module_exit(wusbcore_exit);
+
+MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>");
+MODULE_DESCRIPTION("Wireless USB core");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/wusbcore/wusbhc.h b/drivers/usb/wusbcore/wusbhc.h
new file mode 100644
index 0000000..d0c1324
--- /dev/null
+++ b/drivers/usb/wusbcore/wusbhc.h
@@ -0,0 +1,495 @@
+/*
+ * Wireless USB Host Controller
+ * Common infrastructure for WHCI and HWA WUSB-HC drivers
+ *
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * This driver implements parts common to all Wireless USB Host
+ * Controllers (struct wusbhc, embedding a struct usb_hcd) and is used
+ * by:
+ *
+ *   - hwahc: HWA, USB-dongle that implements a Wireless USB host
+ *     controller, (Wireless USB 1.0 Host-Wire-Adapter specification).
+ *
+ *   - whci: WHCI, a PCI card with a wireless host controller
+ *     (Wireless Host Controller Interface 1.0 specification).
+ *
+ * Check out the Design-overview.txt file in the source documentation
+ * for other details on the implementation.
+ *
+ * Main blocks:
+ *
+ *  rh         Root Hub emulation (part of the HCD glue)
+ *
+ *  devconnect Handle all the issues related to device connection,
+ *             authentication, disconnection, timeout, reseting,
+ *             keepalives, etc.
+ *
+ *  mmc        MMC IE broadcasting handling
+ *
+ * A host controller driver just initializes its stuff and as part of
+ * that, creates a 'struct wusbhc' instance that handles all the
+ * common WUSB mechanisms. Links in the function ops that are specific
+ * to it and then registers the host controller. Ready to run.
+ */
+
+#ifndef __WUSBHC_H__
+#define __WUSBHC_H__
+
+#include <linux/usb.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/kref.h>
+#include <linux/workqueue.h>
+/* FIXME: Yes, I know: BAD--it's not my fault the USB HC iface is not
+ *        public */
+#include <linux/../../drivers/usb/core/hcd.h>
+#include <linux/uwb.h>
+#include <linux/usb/wusb.h>
+
+
+/**
+ * Wireless USB device
+ *
+ * Describe a WUSB device connected to the cluster. This struct
+ * belongs to the 'struct wusb_port' it is attached to and it is
+ * responsible for putting and clearing the pointer to it.
+ *
+ * Note this "complements" the 'struct usb_device' that the usb_hcd
+ * keeps for each connected USB device. However, it extends some
+ * information that is not available (there is no hcpriv ptr in it!)
+ * *and* most importantly, it's life cycle is different. It is created
+ * as soon as we get a DN_Connect (connect request notification) from
+ * the device through the WUSB host controller; the USB stack doesn't
+ * create the device until we authenticate it. FIXME: this will
+ * change.
+ *
+ * @bos:    This is allocated when the BOS descriptors are read from
+ *          the device and freed upon the wusb_dev struct dying.
+ * @wusb_cap_descr: points into @bos, and has been verified to be size
+ *                  safe.
+ */
+struct wusb_dev {
+	struct kref refcnt;
+	struct wusbhc *wusbhc;
+	struct list_head cack_node;	/* Connect-Ack list */
+	u8 port_idx;
+	u8 addr;
+	u8 beacon_type:4;
+	struct usb_encryption_descriptor ccm1_etd;
+	struct wusb_ckhdid cdid;
+	unsigned long entry_ts;
+	struct usb_bos_descriptor *bos;
+	struct usb_wireless_cap_descriptor *wusb_cap_descr;
+	struct uwb_mas_bm availability;
+	struct work_struct devconnect_acked_work;
+	struct urb *set_gtk_urb;
+	struct usb_ctrlrequest *set_gtk_req;
+	struct usb_device *usb_dev;
+};
+
+#define WUSB_DEV_ADDR_UNAUTH 0x80
+
+static inline void wusb_dev_init(struct wusb_dev *wusb_dev)
+{
+	kref_init(&wusb_dev->refcnt);
+	/* no need to init the cack_node */
+}
+
+extern void wusb_dev_destroy(struct kref *_wusb_dev);
+
+static inline struct wusb_dev *wusb_dev_get(struct wusb_dev *wusb_dev)
+{
+	kref_get(&wusb_dev->refcnt);
+	return wusb_dev;
+}
+
+static inline void wusb_dev_put(struct wusb_dev *wusb_dev)
+{
+	kref_put(&wusb_dev->refcnt, wusb_dev_destroy);
+}
+
+/**
+ * Wireless USB Host Controlller root hub "fake" ports
+ * (state and device information)
+ *
+ * Wireless USB is wireless, so there are no ports; but we
+ * fake'em. Each RC can connect a max of devices at the same time
+ * (given in the Wireless Adapter descriptor, bNumPorts or WHCI's
+ * caps), referred to in wusbhc->ports_max.
+ *
+ * See rh.c for more information.
+ *
+ * The @status and @change use the same bits as in USB2.0[11.24.2.7],
+ * so we don't have to do much when getting the port's status.
+ *
+ * WUSB1.0[7.1], USB2.0[11.24.2.7.1,fig 11-10],
+ * include/linux/usb_ch9.h (#define USB_PORT_STAT_*)
+ */
+struct wusb_port {
+	u16 status;
+	u16 change;
+	struct wusb_dev *wusb_dev;	/* connected device's info */
+	unsigned reset_count;
+	u32 ptk_tkid;
+};
+
+/**
+ * WUSB Host Controller specifics
+ *
+ * All fields that are common to all Wireless USB controller types
+ * (HWA and WHCI) are grouped here. Host Controller
+ * functions/operations that only deal with general Wireless USB HC
+ * issues use this data type to refer to the host.
+ *
+ * @usb_hcd 	   Instantiation of a USB host controller
+ *                 (initialized by upper layer [HWA=HC or WHCI].
+ *
+ * @dev		   Device that implements this; initialized by the
+ *                 upper layer (HWA-HC, WHCI...); this device should
+ *                 have a refcount.
+ *
+ * @trust_timeout  After this time without hearing for device
+ *                 activity, we consider the device gone and we have to
+ *                 re-authenticate.
+ *
+ *                 Can be accessed w/o locking--however, read to a
+ *                 local variable then use.
+ *
+ * @chid           WUSB Cluster Host ID: this is supposed to be a
+ *                 unique value that doesn't change across reboots (so
+ *                 that your devices do not require re-association).
+ *
+ *                 Read/Write protected by @mutex
+ *
+ * @dev_info       This array has ports_max elements. It is used to
+ *                 give the HC information about the WUSB devices (see
+ *                 'struct wusb_dev_info').
+ *
+ *	           For HWA we need to allocate it in heap; for WHCI it
+ *                 needs to be permanently mapped, so we keep it for
+ *                 both and make it easy. Call wusbhc->dev_info_set()
+ *                 to update an entry.
+ *
+ * @ports_max	   Number of simultaneous device connections (fake
+ *                 ports) this HC will take. Read-only.
+ *
+ * @port      	   Array of port status for each fake root port. Guaranteed to
+ *                 always be the same lenght during device existence
+ *                 [this allows for some unlocked but referenced reading].
+ *
+ * @mmcies_max	   Max number of Information Elements this HC can send
+ *                 in its MMC. Read-only.
+ *
+ * @mmcie_add	   HC specific operation (WHCI or HWA) for adding an
+ *                 MMCIE.
+ *
+ * @mmcie_rm	   HC specific operation (WHCI or HWA) for removing an
+ *                 MMCIE.
+ *
+ * @enc_types	   Array which describes the encryptions methods
+ *                 supported by the host as described in WUSB1.0 --
+ *                 one entry per supported method. As of WUSB1.0 there
+ *                 is only four methods, we make space for eight just in
+ *                 case they decide to add some more (and pray they do
+ *                 it in sequential order). if 'enc_types[enc_method]
+ *                 != 0', then it is supported by the host. enc_method
+ *                 is USB_ENC_TYPE*.
+ *
+ * @set_ptk:       Set the PTK and enable encryption for a device. Or, if
+ *                 the supplied key is NULL, disable encryption for that
+ *                 device.
+ *
+ * @set_gtk:       Set the GTK to be used for all future broadcast packets
+ *                 (i.e., MMCs).  With some hardware, setting the GTK may start
+ *                 MMC transmission.
+ *
+ * NOTE:
+ *
+ *  - If wusb_dev->usb_dev is not NULL, then usb_dev is valid
+ *    (wusb_dev has a refcount on it). Likewise, if usb_dev->wusb_dev
+ *    is not NULL, usb_dev->wusb_dev is valid (usb_dev keeps a
+ *    refcount on it).
+ *
+ *    Most of the times when you need to use it, it will be non-NULL,
+ *    so there is no real need to check for it (wusb_dev will
+ *    dissapear before usb_dev).
+ *
+ *  - The following fields need to be filled out before calling
+ *    wusbhc_create(): ports_max, mmcies_max, mmcie_{add,rm}.
+ *
+ *  - there is no wusbhc_init() method, we do everything in
+ *    wusbhc_create().
+ *
+ *  - Creation is done in two phases, wusbhc_create() and
+ *    wusbhc_create_b(); b are the parts that need to be called after
+ *    calling usb_hcd_add(&wusbhc->usb_hcd).
+ */
+struct wusbhc {
+	struct usb_hcd usb_hcd;		/* HAS TO BE 1st */
+	struct device *dev;
+	struct uwb_rc *uwb_rc;
+	struct uwb_pal pal;
+
+	unsigned trust_timeout;			/* in jiffies */
+	struct wuie_host_info *wuie_host_info;	/* Includes CHID */
+
+	struct mutex mutex;			/* locks everything else */
+	u16 cluster_id;				/* Wireless USB Cluster ID */
+	struct wusb_port *port;			/* Fake port status handling */
+	struct wusb_dev_info *dev_info;		/* for Set Device Info mgmt */
+	u8 ports_max;
+	unsigned active:1;			/* currently xmit'ing MMCs */
+	struct wuie_keep_alive keep_alive_ie;	/* protected by mutex */
+	struct delayed_work keep_alive_timer;
+	struct list_head cack_list;		/* Connect acknowledging */
+	size_t cack_count;			/* protected by 'mutex' */
+	struct wuie_connect_ack cack_ie;
+	struct uwb_rsv *rsv;		/* cluster bandwidth reservation */
+
+	struct mutex mmcie_mutex;		/* MMC WUIE handling */
+	struct wuie_hdr **mmcie;		/* WUIE array */
+	u8 mmcies_max;
+	/* FIXME: make wusbhc_ops? */
+	int (*start)(struct wusbhc *wusbhc);
+	void (*stop)(struct wusbhc *wusbhc);
+	int (*mmcie_add)(struct wusbhc *wusbhc, u8 interval, u8 repeat_cnt,
+			 u8 handle, struct wuie_hdr *wuie);
+	int (*mmcie_rm)(struct wusbhc *wusbhc, u8 handle);
+	int (*dev_info_set)(struct wusbhc *, struct wusb_dev *wusb_dev);
+	int (*bwa_set)(struct wusbhc *wusbhc, s8 stream_index,
+		       const struct uwb_mas_bm *);
+	int (*set_ptk)(struct wusbhc *wusbhc, u8 port_idx,
+		       u32 tkid, const void *key, size_t key_size);
+	int (*set_gtk)(struct wusbhc *wusbhc,
+		       u32 tkid, const void *key, size_t key_size);
+	int (*set_num_dnts)(struct wusbhc *wusbhc, u8 interval, u8 slots);
+
+	struct {
+		struct usb_key_descriptor descr;
+		u8 data[16];				/* GTK key data */
+	} __attribute__((packed)) gtk;
+	u8 gtk_index;
+	u32 gtk_tkid;
+	struct work_struct gtk_rekey_done_work;
+	int pending_set_gtks;
+
+	struct usb_encryption_descriptor *ccm1_etd;
+};
+
+#define usb_hcd_to_wusbhc(u) container_of((u), struct wusbhc, usb_hcd)
+
+
+extern int wusbhc_create(struct wusbhc *);
+extern int wusbhc_b_create(struct wusbhc *);
+extern void wusbhc_b_destroy(struct wusbhc *);
+extern void wusbhc_destroy(struct wusbhc *);
+extern int wusb_dev_sysfs_add(struct wusbhc *, struct usb_device *,
+			      struct wusb_dev *);
+extern void wusb_dev_sysfs_rm(struct wusb_dev *);
+extern int wusbhc_sec_create(struct wusbhc *);
+extern int wusbhc_sec_start(struct wusbhc *);
+extern void wusbhc_sec_stop(struct wusbhc *);
+extern void wusbhc_sec_destroy(struct wusbhc *);
+extern void wusbhc_giveback_urb(struct wusbhc *wusbhc, struct urb *urb,
+				int status);
+void wusbhc_reset_all(struct wusbhc *wusbhc);
+
+int wusbhc_pal_register(struct wusbhc *wusbhc);
+void wusbhc_pal_unregister(struct wusbhc *wusbhc);
+
+/*
+ * Return @usb_dev's @usb_hcd (properly referenced) or NULL if gone
+ *
+ * @usb_dev: USB device, UNLOCKED and referenced (or otherwise, safe ptr)
+ *
+ * This is a safe assumption as @usb_dev->bus is referenced all the
+ * time during the @usb_dev life cycle.
+ */
+static inline struct usb_hcd *usb_hcd_get_by_usb_dev(struct usb_device *usb_dev)
+{
+	struct usb_hcd *usb_hcd;
+	usb_hcd = container_of(usb_dev->bus, struct usb_hcd, self);
+	return usb_get_hcd(usb_hcd);
+}
+
+/*
+ * Increment the reference count on a wusbhc.
+ *
+ * @wusbhc's life cycle is identical to that of the underlying usb_hcd.
+ */
+static inline struct wusbhc *wusbhc_get(struct wusbhc *wusbhc)
+{
+	return usb_get_hcd(&wusbhc->usb_hcd) ? wusbhc : NULL;
+}
+
+/*
+ * Return the wusbhc associated to a @usb_dev
+ *
+ * @usb_dev: USB device, UNLOCKED and referenced (or otherwise, safe ptr)
+ *
+ * @returns: wusbhc for @usb_dev; NULL if the @usb_dev is being torn down.
+ *           WARNING: referenced at the usb_hcd level, unlocked
+ *
+ * FIXME: move offline
+ */
+static inline struct wusbhc *wusbhc_get_by_usb_dev(struct usb_device *usb_dev)
+{
+	struct wusbhc *wusbhc = NULL;
+	struct usb_hcd *usb_hcd;
+	if (usb_dev->devnum > 1 && !usb_dev->wusb) {
+		/* but root hubs */
+		dev_err(&usb_dev->dev, "devnum %d wusb %d\n", usb_dev->devnum,
+			usb_dev->wusb);
+		BUG_ON(usb_dev->devnum > 1 && !usb_dev->wusb);
+	}
+	usb_hcd = usb_hcd_get_by_usb_dev(usb_dev);
+	if (usb_hcd == NULL)
+		return NULL;
+	BUG_ON(usb_hcd->wireless == 0);
+	return wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+}
+
+
+static inline void wusbhc_put(struct wusbhc *wusbhc)
+{
+	usb_put_hcd(&wusbhc->usb_hcd);
+}
+
+int wusbhc_start(struct wusbhc *wusbhc, const struct wusb_ckhdid *chid);
+void wusbhc_stop(struct wusbhc *wusbhc);
+extern int wusbhc_chid_set(struct wusbhc *, const struct wusb_ckhdid *);
+
+/* Device connect handling */
+extern int wusbhc_devconnect_create(struct wusbhc *);
+extern void wusbhc_devconnect_destroy(struct wusbhc *);
+extern int wusbhc_devconnect_start(struct wusbhc *wusbhc,
+				   const struct wusb_ckhdid *chid);
+extern void wusbhc_devconnect_stop(struct wusbhc *wusbhc);
+extern int wusbhc_devconnect_auth(struct wusbhc *, u8);
+extern void wusbhc_handle_dn(struct wusbhc *, u8 srcaddr,
+			     struct wusb_dn_hdr *dn_hdr, size_t size);
+extern int wusbhc_dev_reset(struct wusbhc *wusbhc, u8 port);
+extern void __wusbhc_dev_disable(struct wusbhc *wusbhc, u8 port);
+extern int wusb_usb_ncb(struct notifier_block *nb, unsigned long val,
+			void *priv);
+extern int wusb_set_dev_addr(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev,
+			     u8 addr);
+
+/* Wireless USB fake Root Hub methods */
+extern int wusbhc_rh_create(struct wusbhc *);
+extern void wusbhc_rh_destroy(struct wusbhc *);
+
+extern int wusbhc_rh_status_data(struct usb_hcd *, char *);
+extern int wusbhc_rh_control(struct usb_hcd *, u16, u16, u16, char *, u16);
+extern int wusbhc_rh_suspend(struct usb_hcd *);
+extern int wusbhc_rh_resume(struct usb_hcd *);
+extern int wusbhc_rh_start_port_reset(struct usb_hcd *, unsigned);
+
+/* MMC handling */
+extern int wusbhc_mmcie_create(struct wusbhc *);
+extern void wusbhc_mmcie_destroy(struct wusbhc *);
+extern int wusbhc_mmcie_set(struct wusbhc *, u8 interval, u8 repeat_cnt,
+			    struct wuie_hdr *);
+extern void wusbhc_mmcie_rm(struct wusbhc *, struct wuie_hdr *);
+
+/* Bandwidth reservation */
+int wusbhc_rsv_establish(struct wusbhc *wusbhc);
+void wusbhc_rsv_terminate(struct wusbhc *wusbhc);
+
+/*
+ * I've always said
+ * I wanted a wedding in a church...
+ *
+ * but lately I've been thinking about
+ * the Botanical Gardens.
+ *
+ * We could do it by the tulips.
+ * It'll be beautiful
+ *
+ * --Security!
+ */
+extern int wusb_dev_sec_add(struct wusbhc *, struct usb_device *,
+				struct wusb_dev *);
+extern void wusb_dev_sec_rm(struct wusb_dev *) ;
+extern int wusb_dev_4way_handshake(struct wusbhc *, struct wusb_dev *,
+				   struct wusb_ckhdid *ck);
+void wusbhc_gtk_rekey(struct wusbhc *wusbhc);
+
+
+/* WUSB Cluster ID handling */
+extern u8 wusb_cluster_id_get(void);
+extern void wusb_cluster_id_put(u8);
+
+/*
+ * wusb_port_by_idx - return the port associated to a zero-based port index
+ *
+ * NOTE: valid without locking as long as wusbhc is referenced (as the
+ *       number of ports doesn't change). The data pointed to has to
+ *       be verified though :)
+ */
+static inline struct wusb_port *wusb_port_by_idx(struct wusbhc *wusbhc,
+						 u8 port_idx)
+{
+	return &wusbhc->port[port_idx];
+}
+
+/*
+ * wusb_port_no_to_idx - Convert port number (per usb_dev->portnum) to
+ * a port_idx.
+ *
+ * USB stack USB ports are 1 based!!
+ *
+ * NOTE: only valid for WUSB devices!!!
+ */
+static inline u8 wusb_port_no_to_idx(u8 port_no)
+{
+	return port_no - 1;
+}
+
+extern struct wusb_dev *__wusb_dev_get_by_usb_dev(struct wusbhc *,
+						  struct usb_device *);
+
+/*
+ * Return a referenced wusb_dev given a @usb_dev
+ *
+ * Returns NULL if the usb_dev is being torn down.
+ *
+ * FIXME: move offline
+ */
+static inline
+struct wusb_dev *wusb_dev_get_by_usb_dev(struct usb_device *usb_dev)
+{
+	struct wusbhc *wusbhc;
+	struct wusb_dev *wusb_dev;
+	wusbhc = wusbhc_get_by_usb_dev(usb_dev);
+	if (wusbhc == NULL)
+		return NULL;
+	mutex_lock(&wusbhc->mutex);
+	wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, usb_dev);
+	mutex_unlock(&wusbhc->mutex);
+	wusbhc_put(wusbhc);
+	return wusb_dev;
+}
+
+/* Misc */
+
+extern struct workqueue_struct *wusbd;
+#endif /* #ifndef __WUSBHC_H__ */