summaryrefslogtreecommitdiffstats
path: root/drivers/usb
diff options
context:
space:
mode:
authorRuss Dill <Russ.Dill@gmail.com>2012-06-14 09:24:21 -0700
committerSamuel Ortiz <sameo@linux.intel.com>2012-07-09 00:16:25 +0200
commitc05995c3d7d0d8edda6ecd2855ac5fad15fa4723 (patch)
tree96aa46b3051ca487caba262c01c7084abba5dc09 /drivers/usb
parent487bae3c3a4275952ab08fe70da3dae45b54f67a (diff)
downloadop-kernel-dev-c05995c3d7d0d8edda6ecd2855ac5fad15fa4723.zip
op-kernel-dev-c05995c3d7d0d8edda6ecd2855ac5fad15fa4723.tar.gz
mfd: USB: Fix the omap-usb EHCI ULPI PHY reset fix issues.
'ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue' (1fcb57d0) fixes an issue where the ULPI PHYs were not held in reset while initializing the EHCI controller. However, it also changes behavior in omap-usb-host.c omap_usbhs_init by releasing reset while the configuration in that function was done. This change caused a regression on BB-xM where USB would not function if 'usb start' had been run from u-boot before booting. A change was made to release reset a little bit earlier which fixed the issue on BB-xM and did not cause any regressions on 3430 sdp, the board for which the fix was originally made. This new fix, 'USB: EHCI: OMAP: Finish ehci omap phy reset cycle before adding hcd.', (3aa2ae74) caused a regression on OMAP5. The original fix to hold the EHCI controller in reset during initialization was correct, however it appears that changing omap_usbhs_init to not hold the PHYs in reset during it's configuration was incorrect. This patch first reverts both fixes, and then changes ehci_hcd_omap_probe in ehci-omap.c to hold the PHYs in reset as the original patch had done. It also is sure to incorporate the _cansleep change that has been made in the meantime. I've tested this on Beagleboard xM, I'd really like to get an ack from the 3430 sdp and OMAP5 guys before getting this merged. v3 - Brown paper bag its too early in the morning actually run git commit amend fix v2 - Put cansleep gpiolib call outside of spinlock Acked-by: Mantesh Sarashetti <mantesh@ti.com> Tested-by: Mantesh Sarashetti <mantesh@ti.com> Acked-by: Keshava Munegowda <keshava_mgowda@ti.com> Tested-by: Keshava Munegowda <keshava_mgowda@ti.com> Signed-off-by: Russ Dill <Russ.Dill@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/host/ehci-omap.c18
1 files changed, 8 insertions, 10 deletions
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 17cfb8a..c304354 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -281,14 +281,13 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
}
}
+ /* Hold PHYs in reset while initializing EHCI controller */
if (pdata->phy_reset) {
if (gpio_is_valid(pdata->reset_gpio_port[0]))
- gpio_request_one(pdata->reset_gpio_port[0],
- GPIOF_OUT_INIT_LOW, "USB1 PHY reset");
+ gpio_set_value_cansleep(pdata->reset_gpio_port[0], 0);
if (gpio_is_valid(pdata->reset_gpio_port[1]))
- gpio_request_one(pdata->reset_gpio_port[1],
- GPIOF_OUT_INIT_LOW, "USB2 PHY reset");
+ gpio_set_value_cansleep(pdata->reset_gpio_port[1], 0);
/* Hold the PHY in RESET for enough time till DIR is high */
udelay(10);
@@ -330,6 +329,11 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
omap_ehci->hcs_params = readl(&omap_ehci->caps->hcs_params);
ehci_reset(omap_ehci);
+ ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
+ if (ret) {
+ dev_err(dev, "failed to add hcd with err %d\n", ret);
+ goto err_add_hcd;
+ }
if (pdata->phy_reset) {
/* Hold the PHY in RESET for enough time till
@@ -344,12 +348,6 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
gpio_set_value_cansleep(pdata->reset_gpio_port[1], 1);
}
- ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
- if (ret) {
- dev_err(dev, "failed to add hcd with err %d\n", ret);
- goto err_add_hcd;
- }
-
/* root ports should always stay powered */
ehci_port_power(omap_ehci, 1);
OpenPOWER on IntegriCloud