summaryrefslogtreecommitdiffstats
path: root/drivers/usb
diff options
context:
space:
mode:
authorAlan Stern <stern@rowland.harvard.edu>2012-04-17 15:24:15 -0400
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2012-04-17 15:54:58 -0700
commitdc75ce9d929aabeb0843a6b1a4ab320e58ba1597 (patch)
tree8073cd59739c6c34bc76d1675873d5d4b94d7df7 /drivers/usb
parent749541d19e70905e3971f2a08335a206a98e4d0c (diff)
downloadop-kernel-dev-dc75ce9d929aabeb0843a6b1a4ab320e58ba1597.zip
op-kernel-dev-dc75ce9d929aabeb0843a6b1a4ab320e58ba1597.tar.gz
EHCI: fix criterion for resuming the root hub
This patch (as1542) changes the criterion ehci-hcd uses to tell when it needs to resume the controller's root hub. A resume is needed when a port status change is detected, obviously, but only if the root hub is currently suspended. Right now the driver tests whether the root hub is running, and that is not the correct test. In particular, if the controller has died then the root hub should not be restarted. In addition, some buggy hardware occasionally requires the root hub to be running and sending out SOF packets even while it is nominally supposed to be suspended. In the end, the test needs to be changed. Rather than checking whether the root hub is currently running, the driver will now check whether the root hub is currently suspended. This will yield the correct behavior in all cases. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Peter Chen <B29397@freescale.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/host/ehci-hcd.c2
1 files changed, 1 insertions, 1 deletions
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 806cc95..95ca07a 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -910,7 +910,7 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)
pcd_status = status;
/* resume root hub? */
- if (!(cmd & CMD_RUN))
+ if (ehci->rh_state == EHCI_RH_SUSPENDED)
usb_hcd_resume_root_hub(hcd);
/* get per-port change detect bits */
OpenPOWER on IntegriCloud