Merge tag 'for-usb-linus-2012-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-linus

xHCI 3.6 bug fixes.

Hi Greg,

Here's seven bugfixes for 3.6.  All of them are marked for stable, and
most are vendor-specific fixes.

Details:
--------

 - Commits 052c7f9 and 2963657 fix a couple stupid mistakes I made in a
   Intel xHCI bug fix patch I pushed just before I left for vacation.

 - Commits 29d2145 and a96874a fix issues with the Intel Panther Point
   EHCI to xHCI port switchover.

 - Commit 71c731a adds the work-around for the TI redriver "dead port"
   issue.

 - Commit 319acdf adds a fix for non-PCI xHCI platform drivers.

 - Commit e955a1c works around the UEFI issue with the xHCI host
   sometimes returning 0xff's in the MMIO on boot.

Sarah Sharp

6 files changed, 207 insertions, 9 deletions

diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index c5e9e4a..966d148 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -75,7 +75,9 @@
 #define	NB_PIF0_PWRDOWN_1	0x01100013
 
 #define USB_INTEL_XUSB2PR      0xD0
+#define USB_INTEL_USB2PRM      0xD4
 #define USB_INTEL_USB3_PSSEN   0xD8
+#define USB_INTEL_USB3PRM      0xDC
 
 static struct amd_chipset_info {
 	struct pci_dev	*nb_dev;
@@ -772,10 +774,18 @@ void usb_enable_xhci_ports(struct pci_dev *xhci_pdev)
 		return;
 	}
 
-	ports_available = 0xffffffff;
+	/* Read USB3PRM, the USB 3.0 Port Routing Mask Register
+	 * Indicate the ports that can be changed from OS.
+	 */
+	pci_read_config_dword(xhci_pdev, USB_INTEL_USB3PRM,
+			&ports_available);
+
+	dev_dbg(&xhci_pdev->dev, "Configurable ports to enable SuperSpeed: 0x%x\n",
+			ports_available);
+
 	/* Write USB3_PSSEN, the USB 3.0 Port SuperSpeed Enable
-	 * Register, to turn on SuperSpeed terminations for all
-	 * available ports.
+	 * Register, to turn on SuperSpeed terminations for the
+	 * switchable ports.
 	 */
 	pci_write_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN,
 			cpu_to_le32(ports_available));
@@ -785,7 +795,16 @@ void usb_enable_xhci_ports(struct pci_dev *xhci_pdev)
 	dev_dbg(&xhci_pdev->dev, "USB 3.0 ports that are now enabled "
 			"under xHCI: 0x%x\n", ports_available);
 
-	ports_available = 0xffffffff;
+	/* Read XUSB2PRM, xHCI USB 2.0 Port Routing Mask Register
+	 * Indicate the USB 2.0 ports to be controlled by the xHCI host.
+	 */
+
+	pci_read_config_dword(xhci_pdev, USB_INTEL_USB2PRM,
+			&ports_available);
+
+	dev_dbg(&xhci_pdev->dev, "Configurable USB 2.0 ports to hand over to xCHI: 0x%x\n",
+			ports_available);
+
 	/* Write XUSB2PR, the xHC USB 2.0 Port Routing Register, to
 	 * switch the USB 2.0 power and data lines over to the xHCI
 	 * host.
@@ -822,12 +841,12 @@ static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev)
 	void __iomem *op_reg_base;
 	u32 val;
 	int timeout;
+	int len = pci_resource_len(pdev, 0);
 
 	if (!mmio_resource_enabled(pdev, 0))
 		return;
 
-	base = ioremap_nocache(pci_resource_start(pdev, 0),
-				pci_resource_len(pdev, 0));
+	base = ioremap_nocache(pci_resource_start(pdev, 0), len);
 	if (base == NULL)
 		return;
 
@@ -837,9 +856,17 @@ static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev)
 	 */
 	ext_cap_offset = xhci_find_next_cap_offset(base, XHCI_HCC_PARAMS_OFFSET);
 	do {
+		if ((ext_cap_offset + sizeof(val)) > len) {
+			/* We're reading garbage from the controller */
+			dev_warn(&pdev->dev,
+				 "xHCI controller failing to respond");
+			return;
+		}
+
 		if (!ext_cap_offset)
 			/* We've reached the end of the extended capabilities */
 			goto hc_init;
+
 		val = readl(base + ext_cap_offset);
 		if (XHCI_EXT_CAPS_ID(val) == XHCI_EXT_CAPS_LEGACY)
 			break;
@@ -870,9 +897,10 @@ static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev)
 	/* Disable any BIOS SMIs and clear all SMI events*/
 	writel(val, base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
 
+hc_init:
 	if (usb_is_intel_switchable_xhci(pdev))
 		usb_enable_xhci_ports(pdev);
-hc_init:
+
 	op_reg_base = base + XHCI_HC_LENGTH(readl(base));
 
 	/* Wait for the host controller to be ready before writing any
diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h
index ef004a5..7f69a39 100644
--- a/drivers/usb/host/pci-quirks.h
+++ b/drivers/usb/host/pci-quirks.h
@@ -15,6 +15,7 @@ void usb_disable_xhci_ports(struct pci_dev *xhci_pdev);
 static inline void usb_amd_quirk_pll_disable(void) {}
 static inline void usb_amd_quirk_pll_enable(void) {}
 static inline void usb_amd_dev_put(void) {}
+static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {}
 #endif  /* CONFIG_PCI */
 
 #endif  /*  __LINUX_USB_PCI_QUIRKS_H  */
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 74bfc86..d5eb357 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -493,11 +493,48 @@ static void xhci_hub_report_link_state(u32 *status, u32 status_reg)
 		 * when this bit is set.
 		 */
 		pls |= USB_PORT_STAT_CONNECTION;
+	} else {
+		/*
+		 * If CAS bit isn't set but the Port is already at
+		 * Compliance Mode, fake a connection so the USB core
+		 * notices the Compliance state and resets the port.
+		 * This resolves an issue generated by the SN65LVPE502CP
+		 * in which sometimes the port enters compliance mode
+		 * caused by a delay on the host-device negotiation.
+		 */
+		if (pls == USB_SS_PORT_LS_COMP_MOD)
+			pls |= USB_PORT_STAT_CONNECTION;
 	}
+
 	/* update status field */
 	*status |= pls;
 }
 
+/*
+ * Function for Compliance Mode Quirk.
+ *
+ * This Function verifies if all xhc USB3 ports have entered U0, if so,
+ * the compliance mode timer is deleted. A port won't enter
+ * compliance mode if it has previously entered U0.
+ */
+void xhci_del_comp_mod_timer(struct xhci_hcd *xhci, u32 status, u16 wIndex)
+{
+	u32 all_ports_seen_u0 = ((1 << xhci->num_usb3_ports)-1);
+	bool port_in_u0 = ((status & PORT_PLS_MASK) == XDEV_U0);
+
+	if (!(xhci->quirks & XHCI_COMP_MODE_QUIRK))
+		return;
+
+	if ((xhci->port_status_u0 != all_ports_seen_u0) && port_in_u0) {
+		xhci->port_status_u0 |= 1 << wIndex;
+		if (xhci->port_status_u0 == all_ports_seen_u0) {
+			del_timer_sync(&xhci->comp_mode_recovery_timer);
+			xhci_dbg(xhci, "All USB3 ports have entered U0 already!\n");
+			xhci_dbg(xhci, "Compliance Mode Recovery Timer Deleted.\n");
+		}
+	}
+}
+
 int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		u16 wIndex, char *buf, u16 wLength)
 {
@@ -651,6 +688,11 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		/* Update Port Link State for super speed ports*/
 		if (hcd->speed == HCD_USB3) {
 			xhci_hub_report_link_state(&status, temp);
+			/*
+			 * Verify if all USB3 Ports Have entered U0 already.
+			 * Delete Compliance Mode Timer if so.
+			 */
+			xhci_del_comp_mod_timer(xhci, temp, wIndex);
 		}
 		if (bus_state->port_c_suspend & (1 << wIndex))
 			status |= 1 << USB_PORT_FEAT_C_SUSPEND;
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 689bc18..df90fe5 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -118,7 +118,7 @@ static int xhci_plat_probe(struct platform_device *pdev)
 		goto put_hcd;
 	}
 
-	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+	hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
 	if (!hcd->regs) {
 		dev_dbg(&pdev->dev, "error mapping memory\n");
 		ret = -EFAULT;
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index c59d5b5..6ece0ed 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -26,6 +26,7 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/slab.h>
+#include <linux/dmi.h>
 
 #include "xhci.h"
 
@@ -398,6 +399,95 @@ static void xhci_msix_sync_irqs(struct xhci_hcd *xhci)
 
 #endif
 
+static void compliance_mode_recovery(unsigned long arg)
+{
+	struct xhci_hcd *xhci;
+	struct usb_hcd *hcd;
+	u32 temp;
+	int i;
+
+	xhci = (struct xhci_hcd *)arg;
+
+	for (i = 0; i < xhci->num_usb3_ports; i++) {
+		temp = xhci_readl(xhci, xhci->usb3_ports[i]);
+		if ((temp & PORT_PLS_MASK) == USB_SS_PORT_LS_COMP_MOD) {
+			/*
+			 * Compliance Mode Detected. Letting USB Core
+			 * handle the Warm Reset
+			 */
+			xhci_dbg(xhci, "Compliance Mode Detected->Port %d!\n",
+					i + 1);
+			xhci_dbg(xhci, "Attempting Recovery routine!\n");
+			hcd = xhci->shared_hcd;
+
+			if (hcd->state == HC_STATE_SUSPENDED)
+				usb_hcd_resume_root_hub(hcd);
+
+			usb_hcd_poll_rh_status(hcd);
+		}
+	}
+
+	if (xhci->port_status_u0 != ((1 << xhci->num_usb3_ports)-1))
+		mod_timer(&xhci->comp_mode_recovery_timer,
+			jiffies + msecs_to_jiffies(COMP_MODE_RCVRY_MSECS));
+}
+
+/*
+ * Quirk to work around issue generated by the SN65LVPE502CP USB3.0 re-driver
+ * that causes ports behind that hardware to enter compliance mode sometimes.
+ * The quirk creates a timer that polls every 2 seconds the link state of
+ * each host controller's port and recovers it by issuing a Warm reset
+ * if Compliance mode is detected, otherwise the port will become "dead" (no
+ * device connections or disconnections will be detected anymore). Becasue no
+ * status event is generated when entering compliance mode (per xhci spec),
+ * this quirk is needed on systems that have the failing hardware installed.
+ */
+static void compliance_mode_recovery_timer_init(struct xhci_hcd *xhci)
+{
+	xhci->port_status_u0 = 0;
+	init_timer(&xhci->comp_mode_recovery_timer);
+
+	xhci->comp_mode_recovery_timer.data = (unsigned long) xhci;
+	xhci->comp_mode_recovery_timer.function = compliance_mode_recovery;
+	xhci->comp_mode_recovery_timer.expires = jiffies +
+			msecs_to_jiffies(COMP_MODE_RCVRY_MSECS);
+
+	set_timer_slack(&xhci->comp_mode_recovery_timer,
+			msecs_to_jiffies(COMP_MODE_RCVRY_MSECS));
+	add_timer(&xhci->comp_mode_recovery_timer);
+	xhci_dbg(xhci, "Compliance Mode Recovery Timer Initialized.\n");
+}
+
+/*
+ * This function identifies the systems that have installed the SN65LVPE502CP
+ * USB3.0 re-driver and that need the Compliance Mode Quirk.
+ * Systems:
+ * Vendor: Hewlett-Packard -> System Models: Z420, Z620 and Z820
+ */
+static bool compliance_mode_recovery_timer_quirk_check(void)
+{
+	const char *dmi_product_name, *dmi_sys_vendor;
+
+	dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
+	dmi_sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR);
+
+	if (!(strstr(dmi_sys_vendor, "Hewlett-Packard")))
+		return false;
+
+	if (strstr(dmi_product_name, "Z420") ||
+			strstr(dmi_product_name, "Z620") ||
+			strstr(dmi_product_name, "Z820"))
+		return true;
+
+	return false;
+}
+
+static int xhci_all_ports_seen_u0(struct xhci_hcd *xhci)
+{
+	return (xhci->port_status_u0 == ((1 << xhci->num_usb3_ports)-1));
+}
+
+
 /*
  * Initialize memory for HCD and xHC (one-time init).
  *
@@ -421,6 +511,12 @@ int xhci_init(struct usb_hcd *hcd)
 	retval = xhci_mem_init(xhci, GFP_KERNEL);
 	xhci_dbg(xhci, "Finished xhci_init\n");
 
+	/* Initializing Compliance Mode Recovery Data If Needed */
+	if (compliance_mode_recovery_timer_quirk_check()) {
+		xhci->quirks |= XHCI_COMP_MODE_QUIRK;
+		compliance_mode_recovery_timer_init(xhci);
+	}
+
 	return retval;
 }
 
@@ -629,6 +725,11 @@ void xhci_stop(struct usb_hcd *hcd)
 	del_timer_sync(&xhci->event_ring_timer);
 #endif
 
+	/* Deleting Compliance Mode Recovery Timer */
+	if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+			(!(xhci_all_ports_seen_u0(xhci))))
+		del_timer_sync(&xhci->comp_mode_recovery_timer);
+
 	if (xhci->quirks & XHCI_AMD_PLL_FIX)
 		usb_amd_dev_put();
 
@@ -659,7 +760,7 @@ void xhci_shutdown(struct usb_hcd *hcd)
 {
 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 
-	if (xhci->quirks && XHCI_SPURIOUS_REBOOT)
+	if (xhci->quirks & XHCI_SPURIOUS_REBOOT)
 		usb_disable_xhci_ports(to_pci_dev(hcd->self.controller));
 
 	spin_lock_irq(&xhci->lock);
@@ -806,6 +907,16 @@ int xhci_suspend(struct xhci_hcd *xhci)
 	}
 	spin_unlock_irq(&xhci->lock);
 
+	/*
+	 * Deleting Compliance Mode Recovery Timer because the xHCI Host
+	 * is about to be suspended.
+	 */
+	if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+			(!(xhci_all_ports_seen_u0(xhci)))) {
+		del_timer_sync(&xhci->comp_mode_recovery_timer);
+		xhci_dbg(xhci, "Compliance Mode Recovery Timer Deleted!\n");
+	}
+
 	/* step 5: remove core well power */
 	/* synchronize irq when using MSI-X */
 	xhci_msix_sync_irqs(xhci);
@@ -938,6 +1049,16 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 		usb_hcd_resume_root_hub(hcd);
 		usb_hcd_resume_root_hub(xhci->shared_hcd);
 	}
+
+	/*
+	 * If system is subject to the Quirk, Compliance Mode Timer needs to
+	 * be re-initialized Always after a system resume. Ports are subject
+	 * to suffer the Compliance Mode issue again. It doesn't matter if
+	 * ports have entered previously to U0 before system's suspension.
+	 */
+	if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
+		compliance_mode_recovery_timer_init(xhci);
+
 	return retval;
 }
 #endif	/* CONFIG_PM */
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index c713256..1a05908 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1495,6 +1495,7 @@ struct xhci_hcd {
 #define XHCI_LPM_SUPPORT	(1 << 11)
 #define XHCI_INTEL_HOST		(1 << 12)
 #define XHCI_SPURIOUS_REBOOT	(1 << 13)
+#define XHCI_COMP_MODE_QUIRK	(1 << 14)
 	unsigned int		num_active_eps;
 	unsigned int		limit_active_eps;
 	/* There are two roothubs to keep track of bus suspend info for */
@@ -1511,6 +1512,11 @@ struct xhci_hcd {
 	unsigned		sw_lpm_support:1;
 	/* support xHCI 1.0 spec USB2 hardware LPM */
 	unsigned		hw_lpm_support:1;
+	/* Compliance Mode Recovery Data */
+	struct timer_list	comp_mode_recovery_timer;
+	u32			port_status_u0;
+/* Compliance Mode Timer Triggered every 2 seconds */
+#define COMP_MODE_RCVRY_MSECS 2000
 };
 
 /* convert between an HCD pointer and the corresponding EHCI_HCD */