summaryrefslogtreecommitdiffstats
path: root/drivers/usb
diff options
context:
space:
mode:
authorSarah Sharp <sarah.a.sharp@linux.intel.com>2010-05-24 13:25:21 -0700
committerGreg Kroah-Hartman <gregkh@suse.de>2010-06-04 13:16:19 -0700
commited07453fd356025cc25272629e982f5e4607632c (patch)
treec3c08950b4f98c10e67c7b317b1233e755f53f6c /drivers/usb
parent2d62f3eea98354d61f90d6b115eecf9be5f4bdfe (diff)
downloadop-kernel-dev-ed07453fd356025cc25272629e982f5e4607632c.zip
op-kernel-dev-ed07453fd356025cc25272629e982f5e4607632c.tar.gz
USB: xhci: Wait for host to start running.
When the run bit is set in the xHCI command register, it may take a few microseconds for the host to start running. We cannot ring any doorbells until the host is actually running, so wait until the status register says the host is running. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Reported-by: Shinya Saito <shinya.saito.sx@renesas.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/host/xhci.c39
1 files changed, 32 insertions, 7 deletions
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 79ccfe5..8a49c67 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -106,6 +106,33 @@ int xhci_halt(struct xhci_hcd *xhci)
}
/*
+ * Set the run bit and wait for the host to be running.
+ */
+int xhci_start(struct xhci_hcd *xhci)
+{
+ u32 temp;
+ int ret;
+
+ temp = xhci_readl(xhci, &xhci->op_regs->command);
+ temp |= (CMD_RUN);
+ xhci_dbg(xhci, "// Turn on HC, cmd = 0x%x.\n",
+ temp);
+ xhci_writel(xhci, temp, &xhci->op_regs->command);
+
+ /*
+ * Wait for the HCHalted Status bit to be 0 to indicate the host is
+ * running.
+ */
+ ret = handshake(xhci, &xhci->op_regs->status,
+ STS_HALT, 0, XHCI_MAX_HALT_USEC);
+ if (ret == -ETIMEDOUT)
+ xhci_err(xhci, "Host took too long to start, "
+ "waited %u microseconds.\n",
+ XHCI_MAX_HALT_USEC);
+ return ret;
+}
+
+/*
* Reset a halted HC, and set the internal HC state to HC_STATE_HALT.
*
* This resets pipelines, timers, counters, state machines, etc.
@@ -460,13 +487,11 @@ int xhci_run(struct usb_hcd *hcd)
if (NUM_TEST_NOOPS > 0)
doorbell = xhci_setup_one_noop(xhci);
- temp = xhci_readl(xhci, &xhci->op_regs->command);
- temp |= (CMD_RUN);
- xhci_dbg(xhci, "// Turn on HC, cmd = 0x%x.\n",
- temp);
- xhci_writel(xhci, temp, &xhci->op_regs->command);
- /* Flush PCI posted writes */
- temp = xhci_readl(xhci, &xhci->op_regs->command);
+ if (xhci_start(xhci)) {
+ xhci_halt(xhci);
+ return -ENODEV;
+ }
+
xhci_dbg(xhci, "// @%p = 0x%x\n", &xhci->op_regs->command, temp);
if (doorbell)
(*doorbell)(xhci);
OpenPOWER on IntegriCloud