Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (370 commits)
  ARM: S3C2443: Add set_rate and round_rate calls for armdiv clock
  ARM: S3C2443: Remove #if 0 for clk_mpll
  ARM: S3C2443: Update notes on MPLLREF clock
  ARM: S3C2443: Further clksrc-clk conversions
  ARM: S3C2443: Change to using plat-samsung clksrc-clk implementation
  USB: Fix s3c-hsotg build following Samsung platform header moves
  ARM: S3C64XX: Reintroduce unconditional build of audio device
  ARM: 5961/1: ux500: fix CLKRST addresses
  ARM: 5977/1: arm: Enable backtrace printing on oops when PC is corrupted
  ASoC: Fix S3C64xx IIS driver for Samsung header reorg
  ARM: S3C2440: Fix plat-s3c24xx move of s3c2440/s3c2442 support
  [ARM] pxa: fix typo in mxm8x10.h
  [ARM] pxa/raumfeld: set GPIO drive bits for LED pins
  [ARM] pxa/zeus: Add support for mcp2515 CAN bus
  [ARM] pxa/zeus: Add support for onboard max6369 watchdog
  [ARM] pxa/zeus: Add Eurotech as the manufacturer
  [ARM] pxa/zeus: Correct the USB host initialisation flags
  [ARM] pxa/zeus: Allow usage of 8250-compatible UART in uncompress
  [ARM] pxa: refactor uncompress.h for non-PXA uarts
  [ARM] mmp2: fix incorrect calling of chip->mask_ack() for 2nd level cascaded IRQs
  ...

3 files changed, 25 insertions, 12 deletions

diff --git a/drivers/usb/gadget/fsl_mx3_udc.c b/drivers/usb/gadget/fsl_mx3_udc.c
index 4bc2bf3..20a802e 100644
--- a/drivers/usb/gadget/fsl_mx3_udc.c
+++ b/drivers/usb/gadget/fsl_mx3_udc.c
@@ -17,6 +17,8 @@
 #include <linux/fsl_devices.h>
 #include <linux/platform_device.h>
 
+#include <mach/hardware.h>
+
 static struct clk *mxc_ahb_clk;
 static struct clk *mxc_usb_clk;
 
@@ -28,14 +30,16 @@ int fsl_udc_clk_init(struct platform_device *pdev)
 
 	pdata = pdev->dev.platform_data;
 
-	mxc_ahb_clk = clk_get(&pdev->dev, "usb_ahb");
-	if (IS_ERR(mxc_ahb_clk))
-		return PTR_ERR(mxc_ahb_clk);
+	if (!cpu_is_mx35()) {
+		mxc_ahb_clk = clk_get(&pdev->dev, "usb_ahb");
+		if (IS_ERR(mxc_ahb_clk))
+			return PTR_ERR(mxc_ahb_clk);
 
-	ret = clk_enable(mxc_ahb_clk);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "clk_enable(\"usb_ahb\") failed\n");
-		goto eenahb;
+		ret = clk_enable(mxc_ahb_clk);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "clk_enable(\"usb_ahb\") failed\n");
+			goto eenahb;
+		}
 	}
 
 	/* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */
@@ -50,6 +54,7 @@ int fsl_udc_clk_init(struct platform_device *pdev)
 	if (pdata->phy_mode != FSL_USB2_PHY_ULPI &&
 	    (freq < 59999000 || freq > 60001000)) {
 		dev_err(&pdev->dev, "USB_CLK=%lu, should be 60MHz\n", freq);
+		ret = -EINVAL;
 		goto eclkrate;
 	}
 
@@ -66,9 +71,11 @@ eclkrate:
 	clk_put(mxc_usb_clk);
 	mxc_usb_clk = NULL;
 egusb:
-	clk_disable(mxc_ahb_clk);
+	if (!cpu_is_mx35())
+		clk_disable(mxc_ahb_clk);
 eenahb:
-	clk_put(mxc_ahb_clk);
+	if (!cpu_is_mx35())
+		clk_put(mxc_ahb_clk);
 	return ret;
 }
 
@@ -90,6 +97,8 @@ void fsl_udc_clk_release(void)
 		clk_disable(mxc_usb_clk);
 		clk_put(mxc_usb_clk);
 	}
-	clk_disable(mxc_ahb_clk);
-	clk_put(mxc_ahb_clk);
+	if (!cpu_is_mx35()) {
+		clk_disable(mxc_ahb_clk);
+		clk_put(mxc_ahb_clk);
+	}
 }
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index e6fedbd..be5fb34 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -65,6 +65,10 @@
 #include <mach/pxa25x-udc.h>
 #endif
 
+#ifdef CONFIG_ARCH_LUBBOCK
+#include <mach/lubbock.h>
+#endif
+
 #include <asm/mach/udc_pxa2xx.h>
 
 
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 7e5bf59..f742c8e 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -30,7 +30,7 @@
 
 #include <plat/regs-usb-hsotg-phy.h>
 #include <plat/regs-usb-hsotg.h>
-#include <plat/regs-sys.h>
+#include <mach/regs-sys.h>
 #include <plat/udc-hs.h>
 
 #define DMA_ADDR_INVALID (~((dma_addr_t)0))