usbcore: remove unused argument in autosuspend

Thanks to several earlier patches, usb_autosuspend_device() and
usb_autoresume_device() are never called with a second argument other
than 1.  This patch (as819) removes the now-redundant argument.

It also consolidates some common code between those two routines,
putting it into a new subroutine called usb_autopm_do_device().  And
it includes a sizable kerneldoc update for the affected functions.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

5 files changed, 71 insertions, 62 deletions

diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index fed92be..3ed4cb2 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -561,7 +561,7 @@ static int usbdev_open(struct inode *inode, struct file *file)
 		dev = inode->i_private;
 	if (!dev)
 		goto out;
-	ret = usb_autoresume_device(dev, 1);
+	ret = usb_autoresume_device(dev);
 	if (ret)
 		goto out;
 
@@ -609,7 +609,7 @@ static int usbdev_release(struct inode *inode, struct file *file)
 			releaseintf(ps, ifnum);
 	}
 	destroy_all_async(ps);
-	usb_autosuspend_device(dev, 1);
+	usb_autosuspend_device(dev);
 	usb_unlock_device(dev);
 	usb_put_dev(dev);
 	put_pid(ps->disc_pid);
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 0fa15bd..d6eb5ce 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -205,7 +205,7 @@ static int usb_probe_interface(struct device *dev)
 	if (id) {
 		dev_dbg(dev, "%s - got id\n", __FUNCTION__);
 
-		error = usb_autoresume_device(udev, 1);
+		error = usb_autoresume_device(udev);
 		if (error)
 			return error;
 
@@ -229,7 +229,7 @@ static int usb_probe_interface(struct device *dev)
 		} else
 			intf->condition = USB_INTERFACE_BOUND;
 
-		usb_autosuspend_device(udev, 1);
+		usb_autosuspend_device(udev);
 	}
 
 	return error;
@@ -247,7 +247,7 @@ static int usb_unbind_interface(struct device *dev)
 
 	/* Autoresume for set_interface call below */
 	udev = interface_to_usbdev(intf);
-	error = usb_autoresume_device(udev, 1);
+	error = usb_autoresume_device(udev);
 
 	/* release all urbs for this interface */
 	usb_disable_interface(interface_to_usbdev(intf), intf);
@@ -265,7 +265,7 @@ static int usb_unbind_interface(struct device *dev)
 	intf->needs_remote_wakeup = 0;
 
 	if (!error)
-		usb_autosuspend_device(udev, 1);
+		usb_autosuspend_device(udev);
 
 	return 0;
 }
@@ -940,6 +940,8 @@ done:
 	return status;
 }
 
+#ifdef	CONFIG_USB_SUSPEND
+
 /* Internal routine to check whether we may autosuspend a device. */
 static int autosuspend_check(struct usb_device *udev)
 {
@@ -970,6 +972,12 @@ static int autosuspend_check(struct usb_device *udev)
 	return 0;
 }
 
+#else
+
+#define autosuspend_check(udev)		0
+
+#endif
+
 /**
  * usb_suspend_both - suspend a USB device and its interfaces
  * @udev: the usb_device to suspend
@@ -1048,7 +1056,7 @@ int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
 
 	/* If the suspend succeeded, propagate it up the tree */
 	} else if (parent)
-		usb_autosuspend_device(parent, 1);
+		usb_autosuspend_device(parent);
 
 	// dev_dbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status);
 	return status;
@@ -1096,11 +1104,11 @@ int usb_resume_both(struct usb_device *udev)
 	/* Propagate the resume up the tree, if necessary */
 	if (udev->state == USB_STATE_SUSPENDED) {
 		if (parent) {
-			status = usb_autoresume_device(parent, 1);
+			status = usb_autoresume_device(parent);
 			if (status == 0) {
 				status = usb_resume_device(udev);
 				if (status) {
-					usb_autosuspend_device(parent, 1);
+					usb_autosuspend_device(parent);
 
 					/* It's possible usb_resume_device()
 					 * failed after the port was
@@ -1146,39 +1154,53 @@ int usb_resume_both(struct usb_device *udev)
 
 #ifdef CONFIG_USB_SUSPEND
 
+/* Internal routine to adjust a device's usage counter and change
+ * its autosuspend state.
+ */
+static int usb_autopm_do_device(struct usb_device *udev, int inc_usage_cnt)
+{
+	int	status = 0;
+
+	usb_pm_lock(udev);
+	udev->pm_usage_cnt += inc_usage_cnt;
+	WARN_ON(udev->pm_usage_cnt < 0);
+	if (inc_usage_cnt >= 0 && udev->pm_usage_cnt > 0) {
+		udev->auto_pm = 1;
+		status = usb_resume_both(udev);
+		if (status != 0)
+			udev->pm_usage_cnt -= inc_usage_cnt;
+	} else if (inc_usage_cnt <= 0 && autosuspend_check(udev) == 0)
+		queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend,
+				USB_AUTOSUSPEND_DELAY);
+	usb_pm_unlock(udev);
+	return status;
+}
+
 /**
  * usb_autosuspend_device - delayed autosuspend of a USB device and its interfaces
  * @udev: the usb_device to autosuspend
- * @dec_usage_cnt: flag to decrement @udev's PM-usage counter
  *
  * This routine should be called when a core subsystem is finished using
  * @udev and wants to allow it to autosuspend.  Examples would be when
  * @udev's device file in usbfs is closed or after a configuration change.
  *
- * @dec_usage_cnt should be 1 if the subsystem previously incremented
- * @udev's usage counter (such as by passing 1 to usb_autoresume_device);
- * otherwise it should be 0.
- *
- * If the usage counter for @udev or any of its active interfaces is greater
- * than 0, the autosuspend request will not be queued.  (If an interface
- * driver does not support autosuspend then its usage counter is permanently
- * positive.)  Likewise, if an interface driver requires remote-wakeup
- * capability during autosuspend but remote wakeup is disabled, the
- * autosuspend will fail.
+ * @udev's usage counter is decremented.  If it or any of the usage counters
+ * for an active interface is greater than 0, no autosuspend request will be
+ * queued.  (If an interface driver does not support autosuspend then its
+ * usage counter is permanently positive.)  Furthermore, if an interface
+ * driver requires remote-wakeup capability during autosuspend but remote
+ * wakeup is disabled, the autosuspend will fail.
  *
  * Often the caller will hold @udev's device lock, but this is not
  * necessary.
  *
  * This routine can run only in process context.
  */
-void usb_autosuspend_device(struct usb_device *udev, int dec_usage_cnt)
+void usb_autosuspend_device(struct usb_device *udev)
 {
-	usb_pm_lock(udev);
-	udev->pm_usage_cnt -= dec_usage_cnt;
-	if (autosuspend_check(udev) == 0)
-		queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend,
-				USB_AUTOSUSPEND_DELAY);
-	usb_pm_unlock(udev);
+	int	status;
+
+	status = usb_autopm_do_device(udev, -1);
 	// dev_dbg(&udev->dev, "%s: cnt %d\n",
 	//		__FUNCTION__, udev->pm_usage_cnt);
 }
@@ -1186,39 +1208,27 @@ void usb_autosuspend_device(struct usb_device *udev, int dec_usage_cnt)
 /**
  * usb_autoresume_device - immediately autoresume a USB device and its interfaces
  * @udev: the usb_device to autoresume
- * @inc_usage_cnt: flag to increment @udev's PM-usage counter
  *
  * This routine should be called when a core subsystem wants to use @udev
- * and needs to guarantee that it is not suspended.  In addition, the
- * caller can prevent @udev from being autosuspended subsequently.  (Note
- * that this will not prevent suspend events originating in the PM core.)
- * Examples would be when @udev's device file in usbfs is opened (autosuspend
- * should be prevented until the file is closed) or when a remote-wakeup
- * request is received (later autosuspends should not be prevented).
+ * and needs to guarantee that it is not suspended.  No autosuspend will
+ * occur until usb_autosuspend_device is called.  (Note that this will not
+ * prevent suspend events originating in the PM core.)  Examples would be
+ * when @udev's device file in usbfs is opened or when a remote-wakeup
+ * request is received.
  *
- * @inc_usage_cnt should be 1 to increment @udev's usage counter and prevent
- * autosuspends.  This prevention will persist until the usage counter is
- * decremented again (such as by passing 1 to usb_autosuspend_device).
- * Otherwise @inc_usage_cnt should be 0 to leave the usage counter unchanged.
- * Regardless, if the autoresume fails then the usage counter is not
- * incremented.
+ * @udev's usage counter is incremented to prevent subsequent autosuspends.
+ * However if the autoresume fails then the usage counter is re-decremented.
  *
  * Often the caller will hold @udev's device lock, but this is not
  * necessary (and attempting it might cause deadlock).
  *
  * This routine can run only in process context.
  */
-int usb_autoresume_device(struct usb_device *udev, int inc_usage_cnt)
+int usb_autoresume_device(struct usb_device *udev)
 {
 	int	status;
 
-	usb_pm_lock(udev);
-	udev->pm_usage_cnt += inc_usage_cnt;
-	udev->auto_pm = 1;
-	status = usb_resume_both(udev);
-	if (status != 0)
-		udev->pm_usage_cnt -= inc_usage_cnt;
-	usb_pm_unlock(udev);
+	status = usb_autopm_do_device(udev, 1);
 	// dev_dbg(&udev->dev, "%s: status %d cnt %d\n",
 	//		__FUNCTION__, status, udev->pm_usage_cnt);
 	return status;
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index e46d38b..0ce393e 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1234,7 +1234,7 @@ void usb_disconnect(struct usb_device **pdev)
 	if (udev->parent) {
 		usb_pm_lock(udev);
 		if (!udev->discon_suspended)
-			usb_autosuspend_device(udev->parent, 1);
+			usb_autosuspend_device(udev->parent);
 		usb_pm_unlock(udev);
 	}
 
@@ -1368,7 +1368,7 @@ static int __usb_new_device(void *void_data)
 
 	/* Increment the parent's count of unsuspended children */
 	if (udev->parent)
-		usb_autoresume_device(udev->parent, 1);
+		usb_autoresume_device(udev->parent);
 
 exit:
 	module_put(THIS_MODULE);
@@ -1881,12 +1881,12 @@ static int remote_wakeup(struct usb_device *udev)
 	usb_lock_device(udev);
 	if (udev->state == USB_STATE_SUSPENDED) {
 		dev_dbg(&udev->dev, "usb %sresume\n", "wakeup-");
-		status = usb_autoresume_device(udev, 1);
+		status = usb_autoresume_device(udev);
 
 		/* Give the interface drivers a chance to do something,
 		 * then autosuspend the device again. */
 		if (status == 0)
-			usb_autosuspend_device(udev, 1);
+			usb_autosuspend_device(udev);
 	}
 	usb_unlock_device(udev);
 	return status;
@@ -3099,7 +3099,7 @@ int usb_reset_composite_device(struct usb_device *udev,
 	}
 
 	/* Prevent autosuspend during the reset */
-	usb_autoresume_device(udev, 1);
+	usb_autoresume_device(udev);
 
 	if (iface && iface->condition != USB_INTERFACE_BINDING)
 		iface = NULL;
@@ -3142,7 +3142,7 @@ int usb_reset_composite_device(struct usb_device *udev,
 		}
 	}
 
-	usb_autosuspend_device(udev, 1);
+	usb_autosuspend_device(udev);
 	return ret;
 }
 EXPORT_SYMBOL(usb_reset_composite_device);
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 5684d87..29b0fa9 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1398,7 +1398,7 @@ free_interfaces:
 	}
 
 	/* Wake up the device so we can send it the Set-Config request */
-	ret = usb_autoresume_device(dev, 1);
+	ret = usb_autoresume_device(dev);
 	if (ret)
 		goto free_interfaces;
 
@@ -1421,7 +1421,7 @@ free_interfaces:
 	dev->actconfig = cp;
 	if (!cp) {
 		usb_set_device_state(dev, USB_STATE_ADDRESS);
-		usb_autosuspend_device(dev, 1);
+		usb_autosuspend_device(dev);
 		goto free_interfaces;
 	}
 	usb_set_device_state(dev, USB_STATE_CONFIGURED);
@@ -1490,7 +1490,7 @@ free_interfaces:
 		usb_create_sysfs_intf_files (intf);
 	}
 
-	usb_autosuspend_device(dev, 1);
+	usb_autosuspend_device(dev);
 	return 0;
 }
 
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index 13322e3..17830a8 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -64,14 +64,13 @@ static inline void usb_pm_unlock(struct usb_device *udev) {}
 
 #define USB_AUTOSUSPEND_DELAY	(HZ*2)
 
-extern void usb_autosuspend_device(struct usb_device *udev, int dec_busy_cnt);
-extern int usb_autoresume_device(struct usb_device *udev, int inc_busy_cnt);
+extern void usb_autosuspend_device(struct usb_device *udev);
+extern int usb_autoresume_device(struct usb_device *udev);
 
 #else
 
-#define usb_autosuspend_device(udev, dec_busy_cnt)	do {} while (0)
-static inline int usb_autoresume_device(struct usb_device *udev,
-		int inc_busy_cnt)
+#define usb_autosuspend_device(udev)	do {} while (0)
+static inline int usb_autoresume_device(struct usb_device *udev)
 {
 	return 0;
 }