summaryrefslogtreecommitdiffstats
path: root/drivers/usb
diff options
context:
space:
mode:
authorHauke Mehrtens <hauke@hauke-m.de>2010-07-28 22:11:35 +0200
committerGreg Kroah-Hartman <gregkh@suse.de>2010-08-10 14:35:44 -0700
commitf2402f21caba2aceebbf637458b777300669020f (patch)
treeb63a4aa73da9aa8dc2fc41fdc65d60e5fefa1a48 /drivers/usb
parent356c5a4834a74c621715f7a7f16ded914eecbd3c (diff)
downloadop-kernel-dev-f2402f21caba2aceebbf637458b777300669020f.zip
op-kernel-dev-f2402f21caba2aceebbf637458b777300669020f.tar.gz
USB: Add USB 2.0 to ssb ohci driver
This adds USB 2.0 support to ssb ohci driver. This patch was used in OpenWRT for a long time now. CC: Steve Brown <sbrown@cortland.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/host/ohci-ssb.c52
1 files changed, 49 insertions, 3 deletions
diff --git a/drivers/usb/host/ohci-ssb.c b/drivers/usb/host/ohci-ssb.c
index 23fd6a8..48ee694 100644
--- a/drivers/usb/host/ohci-ssb.c
+++ b/drivers/usb/host/ohci-ssb.c
@@ -93,8 +93,11 @@ static void ssb_ohci_detach(struct ssb_device *dev)
{
struct usb_hcd *hcd = ssb_get_drvdata(dev);
+ if (hcd->driver->shutdown)
+ hcd->driver->shutdown(hcd);
usb_remove_hcd(hcd);
iounmap(hcd->regs);
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
ssb_device_disable(dev, 0);
}
@@ -106,10 +109,52 @@ static int ssb_ohci_attach(struct ssb_device *dev)
int err = -ENOMEM;
u32 tmp, flags = 0;
- if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV)
- flags |= SSB_OHCI_TMSLOW_HOSTMODE;
+ if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
+ dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
+ return -EOPNOTSUPP;
- ssb_device_enable(dev, flags);
+ if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) {
+ /* Put the device into host-mode. */
+ flags |= SSB_OHCI_TMSLOW_HOSTMODE;
+ ssb_device_enable(dev, flags);
+ } else if (dev->id.coreid == SSB_DEV_USB20_HOST) {
+ /*
+ * USB 2.0 special considerations:
+ *
+ * In addition to the standard SSB reset sequence, the Host
+ * Control Register must be programmed to bring the USB core
+ * and various phy components out of reset.
+ */
+ ssb_device_enable(dev, 0);
+ ssb_write32(dev, 0x200, 0x7ff);
+
+ /* Change Flush control reg */
+ tmp = ssb_read32(dev, 0x400);
+ tmp &= ~8;
+ ssb_write32(dev, 0x400, tmp);
+ tmp = ssb_read32(dev, 0x400);
+
+ /* Change Shim control reg */
+ tmp = ssb_read32(dev, 0x304);
+ tmp &= ~0x100;
+ ssb_write32(dev, 0x304, tmp);
+ tmp = ssb_read32(dev, 0x304);
+
+ udelay(1);
+
+ /* Work around for 5354 failures */
+ if (dev->id.revision == 2 && dev->bus->chip_id == 0x5354) {
+ /* Change syn01 reg */
+ tmp = 0x00fe00fe;
+ ssb_write32(dev, 0x894, tmp);
+
+ /* Change syn03 reg */
+ tmp = ssb_read32(dev, 0x89c);
+ tmp |= 0x1;
+ ssb_write32(dev, 0x89c, tmp);
+ }
+ } else
+ ssb_device_enable(dev, 0);
hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev,
dev_name(dev->dev));
@@ -200,6 +245,7 @@ static int ssb_ohci_resume(struct ssb_device *dev)
static const struct ssb_device_id ssb_ohci_table[] = {
SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
+ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
SSB_DEVTABLE_END
};
MODULE_DEVICE_TABLE(ssb, ssb_ohci_table);
OpenPOWER on IntegriCloud