summaryrefslogtreecommitdiffstats
path: root/drivers/usb
diff options
context:
space:
mode:
authorSarah Sharp <sarah.a.sharp@linux.intel.com>2013-08-05 13:36:00 -0700
committerSarah Sharp <sarah.a.sharp@linux.intel.com>2013-10-09 16:26:55 -0700
commitf217c980ca980e3a645b7485ea5eae9a747f4945 (patch)
tree2bdcd262303c7cdd014fa019d142f4c769546b4e /drivers/usb
parentd0e639c9e06d44e713170031fe05fb60ebe680af (diff)
downloadop-kernel-dev-f217c980ca980e3a645b7485ea5eae9a747f4945.zip
op-kernel-dev-f217c980ca980e3a645b7485ea5eae9a747f4945.tar.gz
xhci: Don't enable/disable RWE on bus suspend/resume.
The RWE bit of the USB 2.0 PORTPMSC register is supposed to enable remote wakeup for devices in the lower power link state L1. It has nothing to do with the device suspend remote wakeup from L2. The RWE bit is designed to be set once (when USB 2.0 LPM is enabled for the port) and cleared only when USB 2.0 LPM is disabled for the port. The xHCI bus suspend method was setting the RWE bit erroneously, and the bus resume method was clearing it. The xHCI 1.0 specification with errata up to Aug 12, 2012 says in section 4.23.5.1.1.1 "Hardware Controlled LPM": "While Hardware USB2 LPM is enabled, software shall not modify the HIRDBESL or RWE fields of the USB2 PORTPMSC register..." If we have previously enabled USB 2.0 LPM for a device, that means when the USB 2.0 bus is resumed, we violate the xHCI specification by clearing RWE. It also means that after a bus resume, the host would think remote wakeup is disabled from L1 for ports with USB 2.0 Link PM enabled, which is not what we want. This patch should be backported to kernels as old as 3.2, that contain the commit 65580b4321eb36f16ae8b5987bfa1bb948fc5112 "xHCI: set USB2 hardware LPM". That was the first kernel that supported USB 2.0 Link PM. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@vger.kernel.org
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/host/xhci-hub.c26
1 files changed, 0 insertions, 26 deletions
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 773a6b2..e8b4c56 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -1157,18 +1157,6 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
t1 = xhci_port_state_to_neutral(t1);
if (t1 != t2)
xhci_writel(xhci, t2, port_array[port_index]);
-
- if (hcd->speed != HCD_USB3) {
- /* enable remote wake up for USB 2.0 */
- __le32 __iomem *addr;
- u32 tmp;
-
- /* Get the port power control register address. */
- addr = port_array[port_index] + PORTPMSC;
- tmp = xhci_readl(xhci, addr);
- tmp |= PORT_RWE;
- xhci_writel(xhci, tmp, addr);
- }
}
hcd->state = HC_STATE_SUSPENDED;
bus_state->next_statechange = jiffies + msecs_to_jiffies(10);
@@ -1247,20 +1235,6 @@ int xhci_bus_resume(struct usb_hcd *hcd)
xhci_ring_device(xhci, slot_id);
} else
xhci_writel(xhci, temp, port_array[port_index]);
-
- if (hcd->speed != HCD_USB3) {
- /* disable remote wake up for USB 2.0 */
- __le32 __iomem *addr;
- u32 tmp;
-
- /* Add one to the port status register address to get
- * the port power control register address.
- */
- addr = port_array[port_index] + PORTPMSC;
- tmp = xhci_readl(xhci, addr);
- tmp &= ~PORT_RWE;
- xhci_writel(xhci, tmp, addr);
- }
}
(void) xhci_readl(xhci, &xhci->op_regs->command);
OpenPOWER on IntegriCloud