diff options
author | Sarah Sharp <sarah.a.sharp@linux.intel.com> | 2012-02-20 12:02:19 -0800 |
---|---|---|
committer | Sarah Sharp <sarah.a.sharp@linux.intel.com> | 2012-05-18 15:41:56 -0700 |
commit | 51e0a01206613ad80a3841388ecfa46476dabdf5 (patch) | |
tree | e0b4217644e79eaae21d070cf950ccf861b898f2 /drivers/usb | |
parent | d9b2099cd66de3164f6e17a5c0e3f14cce24a9a3 (diff) | |
download | op-kernel-dev-51e0a01206613ad80a3841388ecfa46476dabdf5.zip op-kernel-dev-51e0a01206613ad80a3841388ecfa46476dabdf5.tar.gz |
USB: Calculate USB 3.0 exit latencies for LPM.
There are several different exit latencies associated with coming out of
the U1 or U2 lower power link state.
Device Exit Latency (DEL) is the maximum time it takes for the USB
device to bring its upstream link into U0. That can be found in the
SuperSpeed Extended Capabilities BOS descriptor for the device. The
time it takes for a particular link in the tree to exit to U0 is the
maximum of either the parent hub's U1/U2 DEL, or the child's U1/U2 DEL.
Hubs introduce a further delay that effects how long it takes a child
device to transition to U0. When a USB 3.0 hub receives a header
packet, it takes some time to decode that header and figure out which
downstream port the packet was destined for. If the port is not in U0,
this hub header decode latency will cause an additional delay for
bringing the child device to U0. This Hub Header Decode Latency is
found in the USB 3.0 hub descriptor.
We can use DEL and the header decode latency, along with additional
latencies imposed by each additional hub tier, to figure out the exit
latencies for both host-initiated and device-initiated exit to U0.
The Max Exit Latency (MEL) is the worst-case time it will take for a
host-initiated exit to U0, based on whether U1 or U2 link states are
enabled. The ping or packet must traverse the path to the device, and
each hub along the way incurs the hub header decode latency in order to
figure out which device the transfer was bound for. We say worst-case,
because some hubs may not be in the lowest link state that is enabled.
See the examples in section C.2.2.1.
Note that "HSD" is a "host specific delay" that the power appendix
architect has not been able to tell me how to calculate. There's no way
to get HSD from the xHCI registers either, so I'm simply ignoring it.
The Path Exit Latency (PEL) is the worst-case time it will take for a
device-initiate exit to U0 to place all the links from the device to the
host into U0.
The System Exit Latency (SEL) is another device-initiated exit latency.
SEL is useful for USB 3.0 devices that need to send data to the host at
specific intervals. The device may send an NRDY to indicate it isn't
ready to send data, then put its link into a lower power state. If it
needs to have that data transmitted at a specific time, it can use SEL
to back calculate when it will need to bring the link back into U0 to
meet its deadlines.
SEL is the worst-case time from the device-initiated exit to U0, to when
the device will receive a packet from the host controller. It includes
PEL, the time it takes for an ERDY to get to the host, a host-specific
delay for the host to process that ERDY, and the time it takes for the
packet to traverse the path to the device. See Figure C-2 in the USB
3.0 bus specification.
Note: I have not been able to get good answers about what the
host-specific delay to process the ERDY should be. The Intel HW
developers say it will be specific to the platform the xHCI host is
integrated into, and they say it's negligible. Ignore this too.
Separate from these four exit latencies are the U1/U2 timeout values we
program into the parent hubs. These timeouts tell the hub to attempt to
place the device into a lower power link state after the link has been
idle for that amount of time.
Create two arrays (one for U1 and one for U2) to store mel, pel, sel,
and the timeout values. Store the exit latency values in nanosecond
units, since that's the smallest units used (DEL is in us, but the Hub
Header Decode Latency is in ns).
If a USB 3.0 device doesn't have a SuperSpeed Extended Capabilities BOS
descriptor, it's highly unlikely it will be able to handle LPM requests
properly. So it's best to disable LPM for devices that don't have this
descriptor, and any children beneath it, if it's a USB 3.0 hub. Warn
users when that happens, since it means they have a non-compliant USB
3.0 device or hub.
This patch assumes a simplified design where links deep in the tree will
not have U1 or U2 enabled unless all their parent links have the
corresponding LPM state enabled. Eventually, we might want to allow a
different policy, and we can revisit this patch when that happens.
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Diffstat (limited to 'drivers/usb')
-rw-r--r-- | drivers/usb/core/hub.c | 211 |
1 files changed, 210 insertions, 1 deletions
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 100e08f..5219507 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -189,9 +189,216 @@ static int usb_device_supports_lpm(struct usb_device *udev) return 1; return 0; } + + /* All USB 3.0 must support LPM, but we need their max exit latency + * information from the SuperSpeed Extended Capabilities BOS descriptor. + */ + if (!udev->bos->ss_cap) { + dev_warn(&udev->dev, "No LPM exit latency info found. " + "Power management will be impacted.\n"); + return 0; + } + if (udev->parent->lpm_capable) + return 1; + + dev_warn(&udev->dev, "Parent hub missing LPM exit latency info. " + "Power management will be impacted.\n"); return 0; } +/* + * Set the Maximum Exit Latency (MEL) for the host to initiate a transition from + * either U1 or U2. + */ +static void usb_set_lpm_mel(struct usb_device *udev, + struct usb3_lpm_parameters *udev_lpm_params, + unsigned int udev_exit_latency, + struct usb_hub *hub, + struct usb3_lpm_parameters *hub_lpm_params, + unsigned int hub_exit_latency) +{ + unsigned int total_mel; + unsigned int device_mel; + unsigned int hub_mel; + + /* + * Calculate the time it takes to transition all links from the roothub + * to the parent hub into U0. The parent hub must then decode the + * packet (hub header decode latency) to figure out which port it was + * bound for. + * + * The Hub Header decode latency is expressed in 0.1us intervals (0x1 + * means 0.1us). Multiply that by 100 to get nanoseconds. + */ + total_mel = hub_lpm_params->mel + + (hub->descriptor->u.ss.bHubHdrDecLat * 100); + + /* + * How long will it take to transition the downstream hub's port into + * U0? The greater of either the hub exit latency or the device exit + * latency. + * + * The BOS U1/U2 exit latencies are expressed in 1us intervals. + * Multiply that by 1000 to get nanoseconds. + */ + device_mel = udev_exit_latency * 1000; + hub_mel = hub_exit_latency * 1000; + if (device_mel > hub_mel) + total_mel += device_mel; + else + total_mel += hub_mel; + + udev_lpm_params->mel = total_mel; +} + +/* + * Set the maximum Device to Host Exit Latency (PEL) for the device to initiate + * a transition from either U1 or U2. + */ +static void usb_set_lpm_pel(struct usb_device *udev, + struct usb3_lpm_parameters *udev_lpm_params, + unsigned int udev_exit_latency, + struct usb_hub *hub, + struct usb3_lpm_parameters *hub_lpm_params, + unsigned int hub_exit_latency, + unsigned int port_to_port_exit_latency) +{ + unsigned int first_link_pel; + unsigned int hub_pel; + + /* + * First, the device sends an LFPS to transition the link between the + * device and the parent hub into U0. The exit latency is the bigger of + * the device exit latency or the hub exit latency. + */ + if (udev_exit_latency > hub_exit_latency) + first_link_pel = udev_exit_latency * 1000; + else + first_link_pel = hub_exit_latency * 1000; + + /* + * When the hub starts to receive the LFPS, there is a slight delay for + * it to figure out that one of the ports is sending an LFPS. Then it + * will forward the LFPS to its upstream link. The exit latency is the + * delay, plus the PEL that we calculated for this hub. + */ + hub_pel = port_to_port_exit_latency * 1000 + hub_lpm_params->pel; + + /* + * According to figure C-7 in the USB 3.0 spec, the PEL for this device + * is the greater of the two exit latencies. + */ + if (first_link_pel > hub_pel) + udev_lpm_params->pel = first_link_pel; + else + udev_lpm_params->pel = hub_pel; +} + +/* + * Set the System Exit Latency (SEL) to indicate the total worst-case time from + * when a device initiates a transition to U0, until when it will receive the + * first packet from the host controller. + * + * Section C.1.5.1 describes the four components to this: + * - t1: device PEL + * - t2: time for the ERDY to make it from the device to the host. + * - t3: a host-specific delay to process the ERDY. + * - t4: time for the packet to make it from the host to the device. + * + * t3 is specific to both the xHCI host and the platform the host is integrated + * into. The Intel HW folks have said it's negligible, FIXME if a different + * vendor says otherwise. + */ +static void usb_set_lpm_sel(struct usb_device *udev, + struct usb3_lpm_parameters *udev_lpm_params) +{ + struct usb_device *parent; + unsigned int num_hubs; + unsigned int total_sel; + + /* t1 = device PEL */ + total_sel = udev_lpm_params->pel; + /* How many external hubs are in between the device & the root port. */ + for (parent = udev->parent, num_hubs = 0; parent->parent; + parent = parent->parent) + num_hubs++; + /* t2 = 2.1us + 250ns * (num_hubs - 1) */ + if (num_hubs > 0) + total_sel += 2100 + 250 * (num_hubs - 1); + + /* t4 = 250ns * num_hubs */ + total_sel += 250 * num_hubs; + + udev_lpm_params->sel = total_sel; +} + +static void usb_set_lpm_parameters(struct usb_device *udev) +{ + struct usb_hub *hub; + unsigned int port_to_port_delay; + unsigned int udev_u1_del; + unsigned int udev_u2_del; + unsigned int hub_u1_del; + unsigned int hub_u2_del; + + if (!udev->lpm_capable || udev->speed != USB_SPEED_SUPER) + return; + + hub = hdev_to_hub(udev->parent); + /* It doesn't take time to transition the roothub into U0, since it + * doesn't have an upstream link. + */ + if (!hub) + return; + + udev_u1_del = udev->bos->ss_cap->bU1devExitLat; + udev_u2_del = udev->bos->ss_cap->bU2DevExitLat; + hub_u1_del = udev->parent->bos->ss_cap->bU1devExitLat; + hub_u2_del = udev->parent->bos->ss_cap->bU2DevExitLat; + + usb_set_lpm_mel(udev, &udev->u1_params, udev_u1_del, + hub, &udev->parent->u1_params, hub_u1_del); + + usb_set_lpm_mel(udev, &udev->u2_params, udev_u2_del, + hub, &udev->parent->u2_params, hub_u2_del); + + /* + * Appendix C, section C.2.2.2, says that there is a slight delay from + * when the parent hub notices the downstream port is trying to + * transition to U0 to when the hub initiates a U0 transition on its + * upstream port. The section says the delays are tPort2PortU1EL and + * tPort2PortU2EL, but it doesn't define what they are. + * + * The hub chapter, sections 10.4.2.4 and 10.4.2.5 seem to be talking + * about the same delays. Use the maximum delay calculations from those + * sections. For U1, it's tHubPort2PortExitLat, which is 1us max. For + * U2, it's tHubPort2PortExitLat + U2DevExitLat - U1DevExitLat. I + * assume the device exit latencies they are talking about are the hub + * exit latencies. + * + * What do we do if the U2 exit latency is less than the U1 exit + * latency? It's possible, although not likely... + */ + port_to_port_delay = 1; + + usb_set_lpm_pel(udev, &udev->u1_params, udev_u1_del, + hub, &udev->parent->u1_params, hub_u1_del, + port_to_port_delay); + + if (hub_u2_del > hub_u1_del) + port_to_port_delay = 1 + hub_u2_del - hub_u1_del; + else + port_to_port_delay = 1 + hub_u1_del; + + usb_set_lpm_pel(udev, &udev->u2_params, udev_u2_del, + hub, &udev->parent->u2_params, hub_u2_del, + port_to_port_delay); + + /* Now that we've got PEL, calculate SEL. */ + usb_set_lpm_sel(udev, &udev->u1_params); + usb_set_lpm_sel(udev, &udev->u2_params); +} + /* USB 2.0 spec Section 11.24.4.5 */ static int get_hub_descriptor(struct usb_device *hdev, void *data) { @@ -3226,8 +3433,10 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, if (udev->wusb == 0 && le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0201) { retval = usb_get_bos_descriptor(udev); - if (!retval) + if (!retval) { udev->lpm_capable = usb_device_supports_lpm(udev); + usb_set_lpm_parameters(udev); + } } retval = 0; |