usb-storage: redo incorrect reads

Some USB mass-storage devices have bugs that cause them not to handle
the first READ(10) command they receive correctly.  The Corsair
Padlock v2 returns completely bogus data for its first read (possibly
it returns the data in encrypted form even though the device is
supposed to be unlocked).  The Feiya SD/SDHC card reader fails to
complete the first READ(10) command after it is plugged in or after a
new card is inserted, returning a status code that indicates it thinks
the command was invalid, which prevents the kernel from retrying the
read.

Since the first read of a new device or a new medium is for the
partition sector, the kernel is unable to retrieve the device's
partition table.  Users have to manually issue an "hdparm -z" or
"blockdev --rereadpt" command before they can access the device.

This patch (as1470) works around the problem.  It adds a new quirk
flag, US_FL_INVALID_READ10, indicating that the first READ(10) should
always be retried immediately, as should any failing READ(10) commands
(provided the preceding READ(10) command succeeded, to avoid getting
stuck in a loop).  The patch also adds appropriate unusual_devs
entries containing the new flag.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Sven Geggus <sven-usbst@geggus.net>
Tested-by: Paul Hartman <paul.hartman+linux@gmail.com>
CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
CC: <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

4 files changed, 62 insertions, 1 deletions

diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index 0041899..e8ae21b 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -819,6 +819,35 @@ Retry_Sense:
 		}
 	}
 
+	/*
+	 * Some devices don't work or return incorrect data the first
+	 * time they get a READ(10) command, or for the first READ(10)
+	 * after a media change.  If the INITIAL_READ10 flag is set,
+	 * keep track of whether READ(10) commands succeed.  If the
+	 * previous one succeeded and this one failed, set the REDO_READ10
+	 * flag to force a retry.
+	 */
+	if (unlikely((us->fflags & US_FL_INITIAL_READ10) &&
+			srb->cmnd[0] == READ_10)) {
+		if (srb->result == SAM_STAT_GOOD) {
+			set_bit(US_FLIDX_READ10_WORKED, &us->dflags);
+		} else if (test_bit(US_FLIDX_READ10_WORKED, &us->dflags)) {
+			clear_bit(US_FLIDX_READ10_WORKED, &us->dflags);
+			set_bit(US_FLIDX_REDO_READ10, &us->dflags);
+		}
+
+		/*
+		 * Next, if the REDO_READ10 flag is set, return a result
+		 * code that will cause the SCSI core to retry the READ(10)
+		 * command immediately.
+		 */
+		if (test_bit(US_FLIDX_REDO_READ10, &us->dflags)) {
+			clear_bit(US_FLIDX_REDO_READ10, &us->dflags);
+			srb->result = DID_IMM_RETRY << 16;
+			srb->sense_buffer[0] = 0;
+		}
+	}
+
 	/* Did we transfer less than the minimum amount required? */
 	if ((srb->result == SAM_STAT_GOOD || srb->sense_buffer[2] == 0) &&
 			scsi_bufflen(srb) - scsi_get_resid(srb) < srb->underflow)
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index c1602b8..ccff348 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1114,6 +1114,16 @@ UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY ),
 
+/* Reported by Paul Hartman <paul.hartman+linux@gmail.com>
+ * This card reader returns "Illegal Request, Logical Block Address
+ * Out of Range" for the first READ(10) after a new card is inserted.
+ */
+UNUSUAL_DEV(  0x090c, 0x6000, 0x0100, 0x0100,
+		"Feiya",
+		"SD/SDHC Card Reader",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_INITIAL_READ10 ),
+
 /* This Pentax still camera is not conformant
  * to the USB storage specification: -
  * - It does not like the INQUIRY command. So we must handle this command
@@ -1888,6 +1898,15 @@ UNUSUAL_DEV( 0x1908, 0x3335, 0x0200, 0x0200,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_NO_READ_DISC_INFO ),
 
+/* Reported by Sven Geggus <sven-usbst@geggus.net>
+ * This encrypted pen drive returns bogus data for the initial READ(10).
+ */
+UNUSUAL_DEV(  0x1b1c, 0x1ab5, 0x0200, 0x0200,
+		"Corsair",
+		"Padlock v2",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_INITIAL_READ10 ),
+
 /* Patch by Richard Schütz <r.schtz@t-online.de>
  * This external hard drive enclosure uses a JMicron chip which
  * needs the US_FL_IGNORE_RESIDUE flag to work properly. */
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 5ee7ac4..0ca0958 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -440,7 +440,8 @@ static void adjust_quirks(struct us_data *us)
 			US_FL_NOT_LOCKABLE | US_FL_MAX_SECTORS_64 |
 			US_FL_CAPACITY_OK | US_FL_IGNORE_RESIDUE |
 			US_FL_SINGLE_LUN | US_FL_NO_WP_DETECT |
-			US_FL_NO_READ_DISC_INFO | US_FL_NO_READ_CAPACITY_16);
+			US_FL_NO_READ_DISC_INFO | US_FL_NO_READ_CAPACITY_16 |
+			US_FL_INITIAL_READ10);
 
 	p = quirks;
 	while (*p) {
@@ -490,6 +491,9 @@ static void adjust_quirks(struct us_data *us)
 		case 'm':
 			f |= US_FL_MAX_SECTORS_64;
 			break;
+		case 'n':
+			f |= US_FL_INITIAL_READ10;
+			break;
 		case 'o':
 			f |= US_FL_CAPACITY_OK;
 			break;
@@ -953,6 +957,13 @@ int usb_stor_probe2(struct us_data *us)
 	if (result)
 		goto BadDevice;
 
+	/*
+	 * If the device returns invalid data for the first READ(10)
+	 * command, indicate the command should be retried.
+	 */
+	if (us->fflags & US_FL_INITIAL_READ10)
+		set_bit(US_FLIDX_REDO_READ10, &us->dflags);
+
 	/* Acquire all the other resources and add the host */
 	result = usb_stor_acquire_resources(us);
 	if (result)
diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h
index 89d3bff..7b0f211 100644
--- a/drivers/usb/storage/usb.h
+++ b/drivers/usb/storage/usb.h
@@ -73,6 +73,8 @@ struct us_unusual_dev {
 #define US_FLIDX_RESETTING	4	/* device reset in progress */
 #define US_FLIDX_TIMED_OUT	5	/* SCSI midlayer timed out  */
 #define US_FLIDX_DONT_SCAN	6	/* don't scan (disconnect)  */
+#define US_FLIDX_REDO_READ10	7	/* redo READ(10) command    */
+#define US_FLIDX_READ10_WORKED	8	/* previous READ(10) succeeded */
 
 #define USB_STOR_STRING_LEN 32