Merge 3.6-rc6 into usb-next

This resolves the merge problems with:
	drivers/usb/dwc3/gadget.c
	drivers/usb/musb/tusb6010.c
that had been seen in linux-next.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

3 files changed, 52 insertions, 5 deletions

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 6d77d2c..dcc05fd 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -703,6 +703,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_PCDJ_DAC2_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_RRCIRKITS_LOCOBUFFER_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ASK_RDR400_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_NZR_SEM_USB_PID) },
 	{ USB_DEVICE(ICOM_VID, ICOM_ID_1_PID) },
 	{ USB_DEVICE(ICOM_VID, ICOM_OPC_U_UC_PID) },
 	{ USB_DEVICE(ICOM_VID, ICOM_ID_RP2C1_PID) },
@@ -803,13 +804,32 @@ static struct usb_device_id id_table_combined [] = {
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(ADI_VID, ADI_GNICEPLUS_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
-	{ USB_DEVICE(MICROCHIP_VID, MICROCHIP_USB_BOARD_PID) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MICROCHIP_VID, MICROCHIP_USB_BOARD_PID,
+					USB_CLASS_VENDOR_SPEC,
+					USB_SUBCLASS_VENDOR_SPEC, 0x00) },
 	{ USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
 	{ USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(LARSENBRUSGAARD_VID, LB_ALTITRACK_PID) },
 	{ USB_DEVICE(GN_OTOMETRICS_VID, AURICAL_USB_PID) },
+	{ USB_DEVICE(FTDI_VID, PI_C865_PID) },
+	{ USB_DEVICE(FTDI_VID, PI_C857_PID) },
+	{ USB_DEVICE(PI_VID, PI_C866_PID) },
+	{ USB_DEVICE(PI_VID, PI_C663_PID) },
+	{ USB_DEVICE(PI_VID, PI_C725_PID) },
+	{ USB_DEVICE(PI_VID, PI_E517_PID) },
+	{ USB_DEVICE(PI_VID, PI_C863_PID) },
 	{ USB_DEVICE(PI_VID, PI_E861_PID) },
+	{ USB_DEVICE(PI_VID, PI_C867_PID) },
+	{ USB_DEVICE(PI_VID, PI_E609_PID) },
+	{ USB_DEVICE(PI_VID, PI_E709_PID) },
+	{ USB_DEVICE(PI_VID, PI_100F_PID) },
+	{ USB_DEVICE(PI_VID, PI_1011_PID) },
+	{ USB_DEVICE(PI_VID, PI_1012_PID) },
+	{ USB_DEVICE(PI_VID, PI_1013_PID) },
+	{ USB_DEVICE(PI_VID, PI_1014_PID) },
+	{ USB_DEVICE(PI_VID, PI_1015_PID) },
+	{ USB_DEVICE(PI_VID, PI_1016_PID) },
 	{ USB_DEVICE(KONDO_VID, KONDO_USB_SERIAL_PID) },
 	{ USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) },
 	{ USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID),
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 5dd96ca..41fe582 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -75,6 +75,9 @@
 #define FTDI_OPENDCC_GATEWAY_PID	0xBFDB
 #define FTDI_OPENDCC_GBM_PID	0xBFDC
 
+/* NZR SEM 16+ USB (http://www.nzr.de) */
+#define FTDI_NZR_SEM_USB_PID	0xC1E0	/* NZR SEM-LOG16+ */
+
 /*
  * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com)
  */
@@ -539,7 +542,10 @@
 /*
  * Microchip Technology, Inc.
  *
- * MICROCHIP_VID (0x04D8) and MICROCHIP_USB_BOARD_PID (0x000A) are also used by:
+ * MICROCHIP_VID (0x04D8) and MICROCHIP_USB_BOARD_PID (0x000A) are
+ * used by single function CDC ACM class based firmware demo
+ * applications.  The VID/PID has also been used in firmware
+ * emulating FTDI serial chips by:
  * Hornby Elite - Digital Command Control Console
  * http://www.hornby.com/hornby-dcc/controllers/
  */
@@ -791,8 +797,27 @@
  * Physik Instrumente
  * http://www.physikinstrumente.com/en/products/
  */
+/* These two devices use the VID of FTDI */
+#define PI_C865_PID	0xe0a0  /* PI C-865 Piezomotor Controller */
+#define PI_C857_PID	0xe0a1  /* PI Encoder Trigger Box */
+
 #define PI_VID              0x1a72  /* Vendor ID */
-#define PI_E861_PID         0x1008  /* E-861 piezo controller USB connection */
+#define PI_C866_PID	0x1000  /* PI C-866 Piezomotor Controller */
+#define PI_C663_PID	0x1001  /* PI C-663 Mercury-Step */
+#define PI_C725_PID	0x1002  /* PI C-725 Piezomotor Controller */
+#define PI_E517_PID	0x1005  /* PI E-517 Digital Piezo Controller Operation Module */
+#define PI_C863_PID	0x1007  /* PI C-863 */
+#define PI_E861_PID	0x1008  /* PI E-861 Piezomotor Controller */
+#define PI_C867_PID	0x1009  /* PI C-867 Piezomotor Controller */
+#define PI_E609_PID	0x100D  /* PI E-609 Digital Piezo Controller */
+#define PI_E709_PID	0x100E  /* PI E-709 Digital Piezo Controller */
+#define PI_100F_PID	0x100F  /* PI Digital Piezo Controller */
+#define PI_1011_PID	0x1011  /* PI Digital Piezo Controller */
+#define PI_1012_PID	0x1012  /* PI Motion Controller */
+#define PI_1013_PID	0x1013  /* PI Motion Controller */
+#define PI_1014_PID	0x1014  /* PI Device */
+#define PI_1015_PID	0x1015  /* PI Device */
+#define PI_1016_PID	0x1016  /* PI Digital Servo Module */
 
 /*
  * Kondo Kagaku Co.Ltd.
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 3229368..53bd5f4 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -886,8 +886,6 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff),
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1018, 0xff, 0xff, 0xff),
-	  .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1057, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1058, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1059, 0xff, 0xff, 0xff) },
@@ -1092,6 +1090,10 @@ static const struct usb_device_id option_ids[] = {
 	 .driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff),
 	 .driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist },
+	{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x01) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x05) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x86, 0x10) },
+
 	{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
 	{ USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
 	{ USB_DEVICE(ALINK_VENDOR_ID, DLINK_PRODUCT_DWM_652_U5) }, /* Yes, ALINK_VENDOR_ID */