summaryrefslogtreecommitdiffstats
path: root/drivers/usb/serial/whiteheat.h
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/usb/serial/whiteheat.h
downloadop-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip
op-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/usb/serial/whiteheat.h')
-rw-r--r--drivers/usb/serial/whiteheat.h282
1 files changed, 282 insertions, 0 deletions
diff --git a/drivers/usb/serial/whiteheat.h b/drivers/usb/serial/whiteheat.h
new file mode 100644
index 0000000..d714eff
--- /dev/null
+++ b/drivers/usb/serial/whiteheat.h
@@ -0,0 +1,282 @@
+/*
+ * USB ConnectTech WhiteHEAT driver
+ *
+ * Copyright (C) 2002
+ * Connect Tech Inc.
+ *
+ * Copyright (C) 1999, 2000
+ * Greg Kroah-Hartman (greg@kroah.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * See Documentation/usb/usb-serial.txt for more information on using this driver
+ *
+ */
+
+#ifndef __LINUX_USB_SERIAL_WHITEHEAT_H
+#define __LINUX_USB_SERIAL_WHITEHEAT_H
+
+
+#define FALSE 0
+#define TRUE 1
+
+
+/* WhiteHEAT commands */
+#define WHITEHEAT_OPEN 1 /* open the port */
+#define WHITEHEAT_CLOSE 2 /* close the port */
+#define WHITEHEAT_SETUP_PORT 3 /* change port settings */
+#define WHITEHEAT_SET_RTS 4 /* turn RTS on or off */
+#define WHITEHEAT_SET_DTR 5 /* turn DTR on or off */
+#define WHITEHEAT_SET_BREAK 6 /* turn BREAK on or off */
+#define WHITEHEAT_DUMP 7 /* dump memory */
+#define WHITEHEAT_STATUS 8 /* get status */
+#define WHITEHEAT_PURGE 9 /* clear the UART fifos */
+#define WHITEHEAT_GET_DTR_RTS 10 /* get the state of DTR and RTS for a port */
+#define WHITEHEAT_GET_HW_INFO 11 /* get EEPROM info and hardware ID */
+#define WHITEHEAT_REPORT_TX_DONE 12 /* get the next TX done */
+#define WHITEHEAT_EVENT 13 /* unsolicited status events */
+#define WHITEHEAT_ECHO 14 /* send data to the indicated IN endpoint */
+#define WHITEHEAT_DO_TEST 15 /* perform the specified test */
+#define WHITEHEAT_CMD_COMPLETE 16 /* reply for certain commands */
+#define WHITEHEAT_CMD_FAILURE 17 /* reply for failed commands */
+
+
+/*
+ * Commands to the firmware
+ */
+
+
+/*
+ * WHITEHEAT_OPEN
+ * WHITEHEAT_CLOSE
+ * WHITEHEAT_STATUS
+ * WHITEHEAT_GET_DTR_RTS
+ * WHITEHEAT_REPORT_TX_DONE
+*/
+struct whiteheat_simple {
+ __u8 port; /* port number (1 to N) */
+};
+
+
+/*
+ * WHITEHEAT_SETUP_PORT
+ */
+#define WHITEHEAT_PAR_NONE 'n' /* no parity */
+#define WHITEHEAT_PAR_EVEN 'e' /* even parity */
+#define WHITEHEAT_PAR_ODD 'o' /* odd parity */
+#define WHITEHEAT_PAR_SPACE '0' /* space (force 0) parity */
+#define WHITEHEAT_PAR_MARK '1' /* mark (force 1) parity */
+
+#define WHITEHEAT_SFLOW_NONE 'n' /* no software flow control */
+#define WHITEHEAT_SFLOW_RX 'r' /* XOFF/ON is sent when RX fills/empties */
+#define WHITEHEAT_SFLOW_TX 't' /* when received XOFF/ON will stop/start TX */
+#define WHITEHEAT_SFLOW_RXTX 'b' /* both SFLOW_RX and SFLOW_TX */
+
+#define WHITEHEAT_HFLOW_NONE 0x00 /* no hardware flow control */
+#define WHITEHEAT_HFLOW_RTS_TOGGLE 0x01 /* RTS is on during transmit, off otherwise */
+#define WHITEHEAT_HFLOW_DTR 0x02 /* DTR is off/on when RX fills/empties */
+#define WHITEHEAT_HFLOW_CTS 0x08 /* when received CTS off/on will stop/start TX */
+#define WHITEHEAT_HFLOW_DSR 0x10 /* when received DSR off/on will stop/start TX */
+#define WHITEHEAT_HFLOW_RTS 0x80 /* RTS is off/on when RX fills/empties */
+
+struct whiteheat_port_settings {
+ __u8 port; /* port number (1 to N) */
+ __u32 baud; /* any value 7 - 460800, firmware calculates best fit; arrives little endian */
+ __u8 bits; /* 5, 6, 7, or 8 */
+ __u8 stop; /* 1 or 2, default 1 (2 = 1.5 if bits = 5) */
+ __u8 parity; /* see WHITEHEAT_PAR_* above */
+ __u8 sflow; /* see WHITEHEAT_SFLOW_* above */
+ __u8 xoff; /* XOFF byte value */
+ __u8 xon; /* XON byte value */
+ __u8 hflow; /* see WHITEHEAT_HFLOW_* above */
+ __u8 lloop; /* 0/1 turns local loopback mode off/on */
+} __attribute__ ((packed));
+
+
+/*
+ * WHITEHEAT_SET_RTS
+ * WHITEHEAT_SET_DTR
+ * WHITEHEAT_SET_BREAK
+ */
+#define WHITEHEAT_RTS_OFF 0x00
+#define WHITEHEAT_RTS_ON 0x01
+#define WHITEHEAT_DTR_OFF 0x00
+#define WHITEHEAT_DTR_ON 0x01
+#define WHITEHEAT_BREAK_OFF 0x00
+#define WHITEHEAT_BREAK_ON 0x01
+
+struct whiteheat_set_rdb {
+ __u8 port; /* port number (1 to N) */
+ __u8 state; /* 0/1 turns signal off/on */
+};
+
+
+/*
+ * WHITEHEAT_DUMP
+ */
+#define WHITEHEAT_DUMP_MEM_DATA 'd' /* data */
+#define WHITEHEAT_DUMP_MEM_IDATA 'i' /* idata */
+#define WHITEHEAT_DUMP_MEM_BDATA 'b' /* bdata */
+#define WHITEHEAT_DUMP_MEM_XDATA 'x' /* xdata */
+
+/*
+ * Allowable address ranges (firmware checks address):
+ * Type DATA: 0x00 - 0xff
+ * Type IDATA: 0x80 - 0xff
+ * Type BDATA: 0x20 - 0x2f
+ * Type XDATA: 0x0000 - 0xffff
+ *
+ * B/I/DATA all read the local memory space
+ * XDATA reads the external memory space
+ * BDATA returns bits as bytes
+ *
+ * NOTE: 0x80 - 0xff (local space) are the Special Function Registers
+ * of the 8051, and some have on-read side-effects.
+ */
+
+struct whiteheat_dump {
+ __u8 mem_type; /* see WHITEHEAT_DUMP_* above */
+ __u16 addr; /* address, see restrictions above */
+ __u16 length; /* number of bytes to dump, max 63 bytes */
+};
+
+
+/*
+ * WHITEHEAT_PURGE
+ */
+#define WHITEHEAT_PURGE_RX 0x01 /* purge rx fifos */
+#define WHITEHEAT_PURGE_TX 0x02 /* purge tx fifos */
+
+struct whiteheat_purge {
+ __u8 port; /* port number (1 to N) */
+ __u8 what; /* bit pattern of what to purge */
+};
+
+
+/*
+ * WHITEHEAT_ECHO
+ */
+struct whiteheat_echo {
+ __u8 port; /* port number (1 to N) */
+ __u8 length; /* length of message to echo, max 61 bytes */
+ __u8 echo_data[61]; /* data to echo */
+};
+
+
+/*
+ * WHITEHEAT_DO_TEST
+ */
+#define WHITEHEAT_TEST_UART_RW 0x01 /* read/write uart registers */
+#define WHITEHEAT_TEST_UART_INTR 0x02 /* uart interrupt */
+#define WHITEHEAT_TEST_SETUP_CONT 0x03 /* setup for PORT_CONT/PORT_DISCONT */
+#define WHITEHEAT_TEST_PORT_CONT 0x04 /* port connect */
+#define WHITEHEAT_TEST_PORT_DISCONT 0x05 /* port disconnect */
+#define WHITEHEAT_TEST_UART_CLK_START 0x06 /* uart clock test start */
+#define WHITEHEAT_TEST_UART_CLK_STOP 0x07 /* uart clock test stop */
+#define WHITEHEAT_TEST_MODEM_FT 0x08 /* modem signals, requires a loopback cable/connector */
+#define WHITEHEAT_TEST_ERASE_EEPROM 0x09 /* erase eeprom */
+#define WHITEHEAT_TEST_READ_EEPROM 0x0a /* read eeprom */
+#define WHITEHEAT_TEST_PROGRAM_EEPROM 0x0b /* program eeprom */
+
+struct whiteheat_test {
+ __u8 port; /* port number (1 to n) */
+ __u8 test; /* see WHITEHEAT_TEST_* above*/
+ __u8 info[32]; /* additional info */
+};
+
+
+/*
+ * Replies from the firmware
+ */
+
+
+/*
+ * WHITEHEAT_STATUS
+ */
+#define WHITEHEAT_EVENT_MODEM 0x01 /* modem field is valid */
+#define WHITEHEAT_EVENT_ERROR 0x02 /* error field is valid */
+#define WHITEHEAT_EVENT_FLOW 0x04 /* flow field is valid */
+#define WHITEHEAT_EVENT_CONNECT 0x08 /* connect field is valid */
+
+#define WHITEHEAT_FLOW_NONE 0x00 /* no flow control active */
+#define WHITEHEAT_FLOW_HARD_OUT 0x01 /* TX is stopped by CTS (waiting for CTS to go on) */
+#define WHITEHEAT_FLOW_HARD_IN 0x02 /* remote TX is stopped by RTS */
+#define WHITEHEAT_FLOW_SOFT_OUT 0x04 /* TX is stopped by XOFF received (waiting for XON) */
+#define WHITEHEAT_FLOW_SOFT_IN 0x08 /* remote TX is stopped by XOFF transmitted */
+#define WHITEHEAT_FLOW_TX_DONE 0x80 /* TX has completed */
+
+struct whiteheat_status_info {
+ __u8 port; /* port number (1 to N) */
+ __u8 event; /* indicates what the current event is, see WHITEHEAT_EVENT_* above */
+ __u8 modem; /* modem signal status (copy of uart's MSR register) */
+ __u8 error; /* line status (copy of uart's LSR register) */
+ __u8 flow; /* flow control state, see WHITEHEAT_FLOW_* above */
+ __u8 connect; /* 0 means not connected, non-zero means connected */
+};
+
+
+/*
+ * WHITEHEAT_GET_DTR_RTS
+ */
+struct whiteheat_dr_info {
+ __u8 mcr; /* copy of uart's MCR register */
+};
+
+
+/*
+ * WHITEHEAT_GET_HW_INFO
+ */
+struct whiteheat_hw_info {
+ __u8 hw_id; /* hardware id number, WhiteHEAT = 0 */
+ __u8 sw_major_rev; /* major version number */
+ __u8 sw_minor_rev; /* minor version number */
+ struct whiteheat_hw_eeprom_info {
+ __u8 b0; /* B0 */
+ __u8 vendor_id_low; /* vendor id (low byte) */
+ __u8 vendor_id_high; /* vendor id (high byte) */
+ __u8 product_id_low; /* product id (low byte) */
+ __u8 product_id_high; /* product id (high byte) */
+ __u8 device_id_low; /* device id (low byte) */
+ __u8 device_id_high; /* device id (high byte) */
+ __u8 not_used_1;
+ __u8 serial_number_0; /* serial number (low byte) */
+ __u8 serial_number_1; /* serial number */
+ __u8 serial_number_2; /* serial number */
+ __u8 serial_number_3; /* serial number (high byte) */
+ __u8 not_used_2;
+ __u8 not_used_3;
+ __u8 checksum_low; /* checksum (low byte) */
+ __u8 checksum_high; /* checksum (high byte */
+ } hw_eeprom_info; /* EEPROM contents */
+};
+
+
+/*
+ * WHITEHEAT_EVENT
+ */
+struct whiteheat_event_info {
+ __u8 port; /* port number (1 to N) */
+ __u8 event; /* see whiteheat_status_info.event */
+ __u8 info; /* see whiteheat_status_info.modem, .error, .flow, .connect */
+};
+
+
+/*
+ * WHITEHEAT_DO_TEST
+ */
+#define WHITEHEAT_TEST_FAIL 0x00 /* test failed */
+#define WHITEHEAT_TEST_UNKNOWN 0x01 /* unknown test requested */
+#define WHITEHEAT_TEST_PASS 0xff /* test passed */
+
+struct whiteheat_test_info {
+ __u8 port; /* port number (1 to N) */
+ __u8 test; /* indicates which test this is a response for, see WHITEHEAT_DO_TEST above */
+ __u8 status; /* see WHITEHEAT_TEST_* above */
+ __u8 results[32]; /* test-dependent results */
+};
+
+
+#endif
OpenPOWER on IntegriCloud