summaryrefslogtreecommitdiffstats
path: root/drivers/usb/serial/oti6858.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2009-06-11 08:57:47 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2009-06-11 08:57:47 -0700
commit49c355617f603b8e71ec117c1f940152a998528a (patch)
tree6b5e373003371bbe8c587a9fdda7bc4f0e791b03 /drivers/usb/serial/oti6858.c
parent991ec02cdca33b03a132a0cacfe6f0aa0be9aa8d (diff)
parentf0e8527726b9e56649b9eafde3bc0fbc4dd2dd47 (diff)
downloadop-kernel-dev-49c355617f603b8e71ec117c1f940152a998528a.zip
op-kernel-dev-49c355617f603b8e71ec117c1f940152a998528a.tar.gz
Merge branch 'serial-from-alan'
* serial-from-alan: (79 commits) moxa: prevent opening unavailable ports imx: serial: use tty_encode_baud_rate to set true rate imx: serial: add IrDA support to serial driver imx: serial: use rational library function lib: isolate rational fractions helper function imx: serial: handle initialisation failure correctly imx: serial: be sure to stop xmit upon shutdown imx: serial: notify higher layers in case xmit IRQ was not called imx: serial: fix one bit field type imx: serial: fix whitespaces (no changes in functionality) tty: use prepare/finish_wait tty: remove sleep_on sierra: driver interface blacklisting sierra: driver urb handling improvements tty: resolve some sierra breakage timbuart: Fix the termios logic serial: Added Timberdale UART driver tty: Add URL for ttydev queue devpts: unregister the file system on error tty: Untangle termios and mm mutex dependencies ...
Diffstat (limited to 'drivers/usb/serial/oti6858.c')
-rw-r--r--drivers/usb/serial/oti6858.c57
1 files changed, 5 insertions, 52 deletions
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index ba551f0..7de5478 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -143,8 +143,7 @@ struct oti6858_control_pkt {
/* function prototypes */
static int oti6858_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp);
-static void oti6858_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp);
+static void oti6858_close(struct usb_serial_port *port);
static void oti6858_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old);
static int oti6858_ioctl(struct tty_struct *tty, struct file *file,
@@ -622,67 +621,30 @@ static int oti6858_open(struct tty_struct *tty,
if (result != 0) {
dev_err(&port->dev, "%s(): usb_submit_urb() failed"
" with error %d\n", __func__, result);
- oti6858_close(tty, port, NULL);
+ oti6858_close(port);
return -EPROTO;
}
/* setup termios */
if (tty)
oti6858_set_termios(tty, port, &tmp_termios);
-
+ port->port.drain_delay = 256; /* FIXME: check the FIFO length */
return 0;
}
-static void oti6858_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void oti6858_close(struct usb_serial_port *port)
{
struct oti6858_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
- long timeout;
- wait_queue_t wait;
dbg("%s(port = %d)", __func__, port->number);
- /* wait for data to drain from the buffer */
spin_lock_irqsave(&priv->lock, flags);
- timeout = 30 * HZ; /* PL2303_CLOSING_WAIT */
- init_waitqueue_entry(&wait, current);
- add_wait_queue(&tty->write_wait, &wait);
- dbg("%s(): entering wait loop", __func__);
- for (;;) {
- set_current_state(TASK_INTERRUPTIBLE);
- if (oti6858_buf_data_avail(priv->buf) == 0
- || timeout == 0 || signal_pending(current)
- || port->serial->disconnected)
- break;
- spin_unlock_irqrestore(&priv->lock, flags);
- timeout = schedule_timeout(timeout);
- spin_lock_irqsave(&priv->lock, flags);
- }
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&tty->write_wait, &wait);
- dbg("%s(): after wait loop", __func__);
-
/* clear out any remaining data in the buffer */
oti6858_buf_clear(priv->buf);
spin_unlock_irqrestore(&priv->lock, flags);
- /* wait for characters to drain from the device */
- /* (this is long enough for the entire 256 byte */
- /* pl2303 hardware buffer to drain with no flow */
- /* control for data rates of 1200 bps or more, */
- /* for lower rates we should really know how much */
- /* data is in the buffer to compute a delay */
- /* that is not unnecessarily long) */
- /* FIXME
- bps = tty_get_baud_rate(tty);
- if (bps > 1200)
- timeout = max((HZ*2560)/bps,HZ/10);
- else
- */
- timeout = 2*HZ;
- schedule_timeout_interruptible(timeout);
- dbg("%s(): after schedule_timeout_interruptible()", __func__);
+ dbg("%s(): after buf_clear()", __func__);
/* cancel scheduled setup */
cancel_delayed_work(&priv->delayed_setup_work);
@@ -694,15 +656,6 @@ static void oti6858_close(struct tty_struct *tty,
usb_kill_urb(port->write_urb);
usb_kill_urb(port->read_urb);
usb_kill_urb(port->interrupt_in_urb);
-
- /*
- if (tty && (tty->termios->c_cflag) & HUPCL) {
- // drop DTR and RTS
- spin_lock_irqsave(&priv->lock, flags);
- priv->pending_setup.control &= ~CONTROL_MASK;
- spin_unlock_irqrestore(&priv->lock, flags);
- }
- */
}
static int oti6858_tiocmset(struct tty_struct *tty, struct file *file,
OpenPOWER on IntegriCloud