USB: replace remaining __FUNCTION__ occurrences

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 78 insertions, 78 deletions

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 54b502f..8b531b3 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -525,7 +525,7 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set, unsigned
 	int rv;
 
 	if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) {
-		dbg("%s - DTR|RTS not being set|cleared", __FUNCTION__);
+		dbg("%s - DTR|RTS not being set|cleared", __func__);
 		return 0;	/* no change */
 	}
 
@@ -553,13 +553,13 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set, unsigned
 	kfree(buf);
 	if (rv < 0) {
 		err("%s Error from MODEM_CTRL urb: DTR %s, RTS %s",
-				__FUNCTION__,
+				__func__,
 				(set & TIOCM_DTR) ? "HIGH" :
 				(clear & TIOCM_DTR) ? "LOW" : "unchanged",
 				(set & TIOCM_RTS) ? "HIGH" :
 				(clear & TIOCM_RTS) ? "LOW" : "unchanged");
 	} else {
-		dbg("%s - DTR %s, RTS %s", __FUNCTION__,
+		dbg("%s - DTR %s, RTS %s", __func__,
 				(set & TIOCM_DTR) ? "HIGH" :
 				(clear & TIOCM_DTR) ? "LOW" : "unchanged",
 				(set & TIOCM_RTS) ? "HIGH" :
@@ -639,7 +639,7 @@ static __u32 get_ftdi_divisor(struct usb_serial_port * port)
 	/* 1. Get the baud rate from the tty settings, this observes alt_speed hack */
 
 	baud = tty_get_baud_rate(port->tty);
-	dbg("%s - tty_get_baud_rate reports speed %d", __FUNCTION__, baud);
+	dbg("%s - tty_get_baud_rate reports speed %d", __func__, baud);
 
 	/* 2. Observe async-compatible custom_divisor hack, update baudrate if needed */
 
@@ -647,7 +647,7 @@ static __u32 get_ftdi_divisor(struct usb_serial_port * port)
 	    ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) &&
 	     (priv->custom_divisor)) {
 		baud = priv->baud_base / priv->custom_divisor;
-		dbg("%s - custom divisor %d sets baud rate to %d", __FUNCTION__, priv->custom_divisor, baud);
+		dbg("%s - custom divisor %d sets baud rate to %d", __func__, priv->custom_divisor, baud);
 	}
 
 	/* 3. Convert baudrate to device-specific divisor */
@@ -668,7 +668,7 @@ static __u32 get_ftdi_divisor(struct usb_serial_port * port)
 		case 115200: div_value = ftdi_sio_b115200; break;
 		} /* baud */
 		if (div_value == 0) {
-			dbg("%s - Baudrate (%d) requested is not supported", __FUNCTION__,  baud);
+			dbg("%s - Baudrate (%d) requested is not supported", __func__,  baud);
 			div_value = ftdi_sio_b9600;
 			baud = 9600;
 			div_okay = 0;
@@ -678,7 +678,7 @@ static __u32 get_ftdi_divisor(struct usb_serial_port * port)
 		if (baud <= 3000000) {
 			div_value = ftdi_232am_baud_to_divisor(baud);
 		} else {
-	                dbg("%s - Baud rate too high!", __FUNCTION__);
+	                dbg("%s - Baud rate too high!", __func__);
 			baud = 9600;
 			div_value = ftdi_232am_baud_to_divisor(9600);
 			div_okay = 0;
@@ -690,7 +690,7 @@ static __u32 get_ftdi_divisor(struct usb_serial_port * port)
 		if (baud <= 3000000) {
 			div_value = ftdi_232bm_baud_to_divisor(baud);
 		} else {
-	                dbg("%s - Baud rate too high!", __FUNCTION__);
+	                dbg("%s - Baud rate too high!", __func__);
 			div_value = ftdi_232bm_baud_to_divisor(9600);
 			div_okay = 0;
 			baud = 9600;
@@ -700,7 +700,7 @@ static __u32 get_ftdi_divisor(struct usb_serial_port * port)
 
 	if (div_okay) {
 		dbg("%s - Baud rate set to %d (divisor 0x%lX) on chip %s",
-			__FUNCTION__, baud, (unsigned long)div_value,
+			__func__, baud, (unsigned long)div_value,
 			ftdi_chip_name[priv->chip_type]);
 	}
 
@@ -801,7 +801,7 @@ static void ftdi_determine_type(struct usb_serial_port *port)
 
 	version = le16_to_cpu(udev->descriptor.bcdDevice);
 	interfaces = udev->actconfig->desc.bNumInterfaces;
-	dbg("%s: bcdDevice = 0x%x, bNumInterfaces = %u", __FUNCTION__,
+	dbg("%s: bcdDevice = 0x%x, bNumInterfaces = %u", __func__,
 			version, interfaces);
 	if (interfaces > 1) {
 		int inter;
@@ -819,7 +819,7 @@ static void ftdi_determine_type(struct usb_serial_port *port)
 		 * to 0x200 when iSerialNumber is 0.  */
 		if (version < 0x500) {
 			dbg("%s: something fishy - bcdDevice too low for multi-interface device",
-					__FUNCTION__);
+					__func__);
 		}
 	} else if (version < 0x200) {
 		/* Old device.  Assume its the original SIO. */
@@ -857,7 +857,7 @@ static ssize_t show_latency_timer(struct device *dev, struct device_attribute *a
 	int rv = 0;
 
 
-	dbg("%s",__FUNCTION__);
+	dbg("%s",__func__);
 
 	rv = usb_control_msg(udev,
 			     usb_rcvctrlpipe(udev, 0),
@@ -884,7 +884,7 @@ static ssize_t store_latency_timer(struct device *dev, struct device_attribute *
 	int v = simple_strtoul(valbuf, NULL, 10);
 	int rv = 0;
 
-	dbg("%s: setting latency timer = %i", __FUNCTION__, v);
+	dbg("%s: setting latency timer = %i", __func__, v);
 
 	rv = usb_control_msg(udev,
 			     usb_sndctrlpipe(udev, 0),
@@ -913,7 +913,7 @@ static ssize_t store_event_char(struct device *dev, struct device_attribute *att
 	int v = simple_strtoul(valbuf, NULL, 10);
 	int rv = 0;
 
-	dbg("%s: setting event char = %i", __FUNCTION__, v);
+	dbg("%s: setting event char = %i", __func__, v);
 
 	rv = usb_control_msg(udev,
 			     usb_sndctrlpipe(udev, 0),
@@ -938,7 +938,7 @@ static int create_sysfs_attrs(struct usb_serial_port *port)
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	int retval = 0;
 
-	dbg("%s",__FUNCTION__);
+	dbg("%s",__func__);
 
 	/* XXX I've no idea if the original SIO supports the event_char
 	 * sysfs parameter, so I'm playing it safe.  */
@@ -960,7 +960,7 @@ static void remove_sysfs_attrs(struct usb_serial_port *port)
 {
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 
-	dbg("%s",__FUNCTION__);
+	dbg("%s",__func__);
 
 	/* XXX see create_sysfs_attrs */
 	if (priv->chip_type != SIO) {
@@ -1002,11 +1002,11 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
 	struct ftdi_sio_quirk *quirk = usb_get_serial_data(port->serial);
 
 
-	dbg("%s",__FUNCTION__);
+	dbg("%s",__func__);
 
 	priv = kzalloc(sizeof(struct ftdi_private), GFP_KERNEL);
 	if (!priv){
-		err("%s- kmalloc(%Zd) failed.", __FUNCTION__, sizeof(struct ftdi_private));
+		err("%s- kmalloc(%Zd) failed.", __func__, sizeof(struct ftdi_private));
 		return -ENOMEM;
 	}
 
@@ -1055,7 +1055,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
 /* Called from usbserial:serial_probe */
 static void ftdi_USB_UIRT_setup (struct ftdi_private *priv)
 {
-	dbg("%s",__FUNCTION__);
+	dbg("%s",__func__);
 
 	priv->flags |= ASYNC_SPD_CUST;
 	priv->custom_divisor = 77;
@@ -1066,7 +1066,7 @@ static void ftdi_USB_UIRT_setup (struct ftdi_private *priv)
  * baudrate (38400 gets mapped to 100000) and RTS-CTS enabled.  */
 static void ftdi_HE_TIRA1_setup (struct ftdi_private *priv)
 {
-	dbg("%s",__FUNCTION__);
+	dbg("%s",__func__);
 
 	priv->flags |= ASYNC_SPD_CUST;
 	priv->custom_divisor = 240;
@@ -1084,7 +1084,7 @@ static int ftdi_jtag_probe(struct usb_serial *serial)
 	struct usb_device *udev = serial->dev;
 	struct usb_interface *interface = serial->interface;
 
-	dbg("%s",__FUNCTION__);
+	dbg("%s",__func__);
 
 	if (interface == udev->actconfig->interface[0]) {
 		info("Ignoring serial port reserved for JTAG");
@@ -1120,14 +1120,14 @@ static int ftdi_mtxorb_hack_setup(struct usb_serial *serial)
  */
 static void ftdi_shutdown (struct usb_serial *serial)
 {
-	dbg("%s", __FUNCTION__);
+	dbg("%s", __func__);
 }
 
 static int ftdi_sio_port_remove(struct usb_serial_port *port)
 {
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 
-	dbg("%s", __FUNCTION__);
+	dbg("%s", __func__);
 
 	remove_sysfs_attrs(port);
 
@@ -1152,7 +1152,7 @@ static int  ftdi_open (struct usb_serial_port *port, struct file *filp)
 	int result = 0;
 	char buf[1]; /* Needed for the usb_control_msg I think */
 
-	dbg("%s", __FUNCTION__);
+	dbg("%s", __func__);
 
 	spin_lock_irqsave(&priv->tx_lock, flags);
 	priv->tx_bytes = 0;
@@ -1197,7 +1197,7 @@ static int  ftdi_open (struct usb_serial_port *port, struct file *filp)
 		      ftdi_read_bulk_callback, port);
 	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
 	if (result)
-		err("%s - failed submitting read urb, error %d", __FUNCTION__, result);
+		err("%s - failed submitting read urb, error %d", __func__, result);
 
 
 	return result;
@@ -1219,7 +1219,7 @@ static void ftdi_close (struct usb_serial_port *port, struct file *filp)
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	char buf[1];
 
-	dbg("%s", __FUNCTION__);
+	dbg("%s", __func__);
 
 	mutex_lock(&port->serial->disc_mutex);
 	if (c_cflag & HUPCL && !port->serial->disconnected){
@@ -1266,7 +1266,7 @@ static int ftdi_write (struct usb_serial_port *port,
 	int transfer_size;
 	unsigned long flags;
 
-	dbg("%s port %d, %d bytes", __FUNCTION__, port->number, count);
+	dbg("%s port %d, %d bytes", __func__, port->number, count);
 
 	if (count == 0) {
 		dbg("write request of 0 bytes");
@@ -1275,7 +1275,7 @@ static int ftdi_write (struct usb_serial_port *port,
 	spin_lock_irqsave(&priv->tx_lock, flags);
 	if (priv->tx_outstanding_urbs > URB_UPPER_LIMIT) {
 		spin_unlock_irqrestore(&priv->tx_lock, flags);
-		dbg("%s - write limit hit\n", __FUNCTION__);
+		dbg("%s - write limit hit\n", __func__);
 		return 0;
 	}
 	priv->tx_outstanding_urbs++;
@@ -1295,14 +1295,14 @@ static int ftdi_write (struct usb_serial_port *port,
 
 	buffer = kmalloc (transfer_size, GFP_ATOMIC);
 	if (!buffer) {
-		err("%s ran out of kernel memory for urb ...", __FUNCTION__);
+		err("%s ran out of kernel memory for urb ...", __func__);
 		count = -ENOMEM;
 		goto error_no_buffer;
 	}
 
 	urb = usb_alloc_urb(0, GFP_ATOMIC);
 	if (!urb) {
-		err("%s - no more free urbs", __FUNCTION__);
+		err("%s - no more free urbs", __func__);
 		count = -ENOMEM;
 		goto error_no_urb;
 	}
@@ -1334,7 +1334,7 @@ static int ftdi_write (struct usb_serial_port *port,
 		memcpy (buffer, buf, count);
 	}
 
-	usb_serial_debug_data(debug, &port->dev, __FUNCTION__, transfer_size, buffer);
+	usb_serial_debug_data(debug, &port->dev, __func__, transfer_size, buffer);
 
 	/* fill the buffer and send it */
 	usb_fill_bulk_urb(urb, port->serial->dev,
@@ -1344,7 +1344,7 @@ static int ftdi_write (struct usb_serial_port *port,
 
 	status = usb_submit_urb(urb, GFP_ATOMIC);
 	if (status) {
-		err("%s - failed submitting write urb, error %d", __FUNCTION__, status);
+		err("%s - failed submitting write urb, error %d", __func__, status);
 		count = status;
 		goto error;
 	} else {
@@ -1358,7 +1358,7 @@ static int ftdi_write (struct usb_serial_port *port,
 	 * really free it when it is finished with it */
 	usb_free_urb(urb);
 
-	dbg("%s write returning: %d", __FUNCTION__, count);
+	dbg("%s write returning: %d", __func__, count);
 	return count;
 error:
 	usb_free_urb(urb);
@@ -1386,7 +1386,7 @@ static void ftdi_write_bulk_callback (struct urb *urb)
 	/* free up the transfer buffer, as usb_free_urb() does not do this */
 	kfree (urb->transfer_buffer);
 
-	dbg("%s - port %d", __FUNCTION__, port->number);
+	dbg("%s - port %d", __func__, port->number);
 
 	if (status) {
 		dbg("nonzero write bulk status received: %d", status);
@@ -1395,7 +1395,7 @@ static void ftdi_write_bulk_callback (struct urb *urb)
 
 	priv = usb_get_serial_port_data(port);
 	if (!priv) {
-		dbg("%s - bad port private data pointer - exiting", __FUNCTION__);
+		dbg("%s - bad port private data pointer - exiting", __func__);
 		return;
 	}
 	/* account for transferred data */
@@ -1420,7 +1420,7 @@ static int ftdi_write_room( struct usb_serial_port *port )
 	int room;
 	unsigned long flags;
 
-	dbg("%s - port %d", __FUNCTION__, port->number);
+	dbg("%s - port %d", __func__, port->number);
 
 	spin_lock_irqsave(&priv->tx_lock, flags);
 	if (priv->tx_outstanding_urbs < URB_UPPER_LIMIT) {
@@ -1444,13 +1444,13 @@ static int ftdi_chars_in_buffer (struct usb_serial_port *port)
 	int buffered;
 	unsigned long flags;
 
-	dbg("%s - port %d", __FUNCTION__, port->number);
+	dbg("%s - port %d", __func__, port->number);
 
 	spin_lock_irqsave(&priv->tx_lock, flags);
 	buffered = (int)priv->tx_outstanding_bytes;
 	spin_unlock_irqrestore(&priv->tx_lock, flags);
 	if (buffered < 0) {
-		err("%s outstanding tx bytes is negative!", __FUNCTION__);
+		err("%s outstanding tx bytes is negative!", __func__);
 		buffered = 0;
 	}
 	return buffered;
@@ -1468,30 +1468,30 @@ static void ftdi_read_bulk_callback (struct urb *urb)
 	int status = urb->status;
 
 	if (urb->number_of_packets > 0) {
-		err("%s transfer_buffer_length %d actual_length %d number of packets %d",__FUNCTION__,
+		err("%s transfer_buffer_length %d actual_length %d number of packets %d",__func__,
 		    urb->transfer_buffer_length, urb->actual_length, urb->number_of_packets );
-		err("%s transfer_flags %x ", __FUNCTION__,urb->transfer_flags );
+		err("%s transfer_flags %x ", __func__,urb->transfer_flags );
 	}
 
-	dbg("%s - port %d", __FUNCTION__, port->number);
+	dbg("%s - port %d", __func__, port->number);
 
 	if (port->open_count <= 0)
 		return;
 
 	tty = port->tty;
 	if (!tty) {
-		dbg("%s - bad tty pointer - exiting",__FUNCTION__);
+		dbg("%s - bad tty pointer - exiting",__func__);
 		return;
 	}
 
 	priv = usb_get_serial_port_data(port);
 	if (!priv) {
-		dbg("%s - bad port private data pointer - exiting", __FUNCTION__);
+		dbg("%s - bad port private data pointer - exiting", __func__);
 		return;
 	}
 
 	if (urb != port->read_urb) {
-		err("%s - Not my urb!", __FUNCTION__);
+		err("%s - Not my urb!", __func__);
 	}
 
 	if (status) {
@@ -1529,39 +1529,39 @@ static void ftdi_process_read (struct work_struct *work)
 	int packet_offset;
 	unsigned long flags;
 
-	dbg("%s - port %d", __FUNCTION__, port->number);
+	dbg("%s - port %d", __func__, port->number);
 
 	if (port->open_count <= 0)
 		return;
 
 	tty = port->tty;
 	if (!tty) {
-		dbg("%s - bad tty pointer - exiting",__FUNCTION__);
+		dbg("%s - bad tty pointer - exiting",__func__);
 		return;
 	}
 
 	priv = usb_get_serial_port_data(port);
 	if (!priv) {
-		dbg("%s - bad port private data pointer - exiting", __FUNCTION__);
+		dbg("%s - bad port private data pointer - exiting", __func__);
 		return;
 	}
 
 	urb = port->read_urb;
 	if (!urb) {
-		dbg("%s - bad read_urb pointer - exiting", __FUNCTION__);
+		dbg("%s - bad read_urb pointer - exiting", __func__);
 		return;
 	}
 
 	data = urb->transfer_buffer;
 
 	if (priv->rx_processed) {
-		dbg("%s - already processed: %d bytes, %d remain", __FUNCTION__,
+		dbg("%s - already processed: %d bytes, %d remain", __func__,
 				priv->rx_processed,
 				urb->actual_length - priv->rx_processed);
 	} else {
 		/* The first two bytes of every read packet are status */
 		if (urb->actual_length > 2) {
-			usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data);
+			usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data);
 		} else {
 			dbg("Status only: %03oo %03oo",data[0],data[1]);
 		}
@@ -1591,17 +1591,17 @@ static void ftdi_process_read (struct work_struct *work)
 
 		length = min(PKTSZ, urb->actual_length-packet_offset)-2;
 		if (length < 0) {
-			err("%s - bad packet length: %d", __FUNCTION__, length+2);
+			err("%s - bad packet length: %d", __func__, length+2);
 			length = 0;
 		}
 
 		if (priv->rx_flags & THROTTLED) {
-			dbg("%s - throttled", __FUNCTION__);
+			dbg("%s - throttled", __func__);
 			break;
 		}
 		if (tty_buffer_request_room(tty, length) < length) {
 			/* break out & wait for throttling/unthrottling to happen */
-			dbg("%s - receive room low", __FUNCTION__);
+			dbg("%s - receive room low", __func__);
 			break;
 		}
 
@@ -1669,7 +1669,7 @@ static void ftdi_process_read (struct work_struct *work)
 		/* not completely processed - record progress */
 		priv->rx_processed = packet_offset;
 		dbg("%s - incomplete, %d bytes processed, %d remain",
-				__FUNCTION__, packet_offset,
+				__func__, packet_offset,
 				urb->actual_length - packet_offset);
 		/* check if we were throttled while processing */
 		spin_lock_irqsave(&priv->rx_lock, flags);
@@ -1677,7 +1677,7 @@ static void ftdi_process_read (struct work_struct *work)
 			priv->rx_flags |= ACTUALLY_THROTTLED;
 			spin_unlock_irqrestore(&priv->rx_lock, flags);
 			dbg("%s - deferring remainder until unthrottled",
-					__FUNCTION__);
+					__func__);
 			return;
 		}
 		spin_unlock_irqrestore(&priv->rx_lock, flags);
@@ -1686,7 +1686,7 @@ static void ftdi_process_read (struct work_struct *work)
 			/* delay processing of remainder */
 			schedule_delayed_work(&priv->rx_work, 1);
 		} else {
-			dbg("%s - port is closed", __FUNCTION__);
+			dbg("%s - port is closed", __func__);
 		}
 		return;
 	}
@@ -1704,7 +1704,7 @@ static void ftdi_process_read (struct work_struct *work)
 
 		result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 		if (result)
-			err("%s - failed resubmitting read urb, error %d", __FUNCTION__, result);
+			err("%s - failed resubmitting read urb, error %d", __func__, result);
 	}
 
 	return;
@@ -1733,10 +1733,10 @@ static void ftdi_break_ctl( struct usb_serial_port *port, int break_state )
 			    FTDI_SIO_SET_DATA_REQUEST_TYPE,
 			    urb_value , priv->interface,
 			    buf, 0, WDR_TIMEOUT) < 0) {
-		err("%s FAILED to enable/disable break state (state was %d)", __FUNCTION__,break_state);
+		err("%s FAILED to enable/disable break state (state was %d)", __func__,break_state);
 	}
 
-	dbg("%s break state is %d - urb is %d", __FUNCTION__,break_state, urb_value);
+	dbg("%s break state is %d - urb is %d", __func__,break_state, urb_value);
 
 }
 
@@ -1760,18 +1760,18 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios *old
 	unsigned char vstop;
 	unsigned char vstart;
 
-	dbg("%s", __FUNCTION__);
+	dbg("%s", __func__);
 
 	/* Force baud rate if this device requires it, unless it is set to B0. */
 	if (priv->force_baud && ((termios->c_cflag & CBAUD) != B0)) {
-		dbg("%s: forcing baud rate for this device", __FUNCTION__);
+		dbg("%s: forcing baud rate for this device", __func__);
 		tty_encode_baud_rate(port->tty, priv->force_baud,
 					priv->force_baud);
 	}
 
 	/* Force RTS-CTS if this device requires it. */
 	if (priv->force_rtscts) {
-		dbg("%s: forcing rtscts for this device", __FUNCTION__);
+		dbg("%s: forcing rtscts for this device", __func__);
 		termios->c_cflag |= CRTSCTS;
 	}
 
@@ -1815,7 +1815,7 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios *old
 			    FTDI_SIO_SET_DATA_REQUEST_TYPE,
 			    urb_value , priv->interface,
 			    buf, 0, WDR_SHORT_TIMEOUT) < 0) {
-		err("%s FAILED to set databits/stopbits/parity", __FUNCTION__);
+		err("%s FAILED to set databits/stopbits/parity", __func__);
 	}
 
 	/* Now do the baudrate */
@@ -1826,14 +1826,14 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios *old
 				    FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
 				    0, priv->interface,
 				    buf, 0, WDR_TIMEOUT) < 0) {
-			err("%s error from disable flowcontrol urb", __FUNCTION__);
+			err("%s error from disable flowcontrol urb", __func__);
 		}
 		/* Drop RTS and DTR */
 		clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
 	} else {
 		/* set the baudrate determined before */
 		if (change_speed(port)) {
-			err("%s urb failed to set baudrate", __FUNCTION__);
+			err("%s urb failed to set baudrate", __func__);
 		}
 		/* Ensure RTS and DTR are raised when baudrate changed from 0 */
 		if (!old_termios || (old_termios->c_cflag & CBAUD) == B0) {
@@ -1844,7 +1844,7 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios *old
 	/* Set flow control */
 	/* Note device also supports DTR/CD (ugh) and Xon/Xoff in hardware */
 	if (cflag & CRTSCTS) {
-		dbg("%s Setting to CRTSCTS flow control", __FUNCTION__);
+		dbg("%s Setting to CRTSCTS flow control", __func__);
 		if (usb_control_msg(dev,
 				    usb_sndctrlpipe(dev, 0),
 				    FTDI_SIO_SET_FLOW_CTRL_REQUEST,
@@ -1862,7 +1862,7 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios *old
 		 * if IXOFF is not set, the pre-xon/xoff code is executed.
 		*/
 		if (iflag & IXOFF) {
-			dbg("%s  request to enable xonxoff iflag=%04x",__FUNCTION__,iflag);
+			dbg("%s  request to enable xonxoff iflag=%04x",__func__,iflag);
 			// Try to enable the XON/XOFF on the ftdi_sio
 			// Set the vstart and vstop -- could have been done up above where
 			// a lot of other dereferencing is done but that would be very
@@ -1883,7 +1883,7 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios *old
 		} else {
 			/* else clause to only run if cfag ! CRTSCTS and iflag ! XOFF */
 			/* CHECKME Assuming XON/XOFF handled by tty stack - not by device */
-			dbg("%s Turning off hardware flow control", __FUNCTION__);
+			dbg("%s Turning off hardware flow control", __func__);
 			if (usb_control_msg(dev,
 					    usb_sndctrlpipe(dev, 0),
 					    FTDI_SIO_SET_FLOW_CTRL_REQUEST,
@@ -1905,7 +1905,7 @@ static int ftdi_tiocmget (struct usb_serial_port *port, struct file *file)
 	unsigned char buf[2];
 	int ret;
 
-	dbg("%s TIOCMGET", __FUNCTION__);
+	dbg("%s TIOCMGET", __func__);
 	switch (priv->chip_type) {
 	case SIO:
 		/* Request the status from the device */
@@ -1915,7 +1915,7 @@ static int ftdi_tiocmget (struct usb_serial_port *port, struct file *file)
 					   FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
 					   0, 0,
 					   buf, 1, WDR_TIMEOUT)) < 0 ) {
-			err("%s Could not get modem status of device - err: %d", __FUNCTION__,
+			err("%s Could not get modem status of device - err: %d", __func__,
 			    ret);
 			return(ret);
 		}
@@ -1932,7 +1932,7 @@ static int ftdi_tiocmget (struct usb_serial_port *port, struct file *file)
 					   FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
 					   0, priv->interface,
 					   buf, 2, WDR_TIMEOUT)) < 0 ) {
-			err("%s Could not get modem status of device - err: %d", __FUNCTION__,
+			err("%s Could not get modem status of device - err: %d", __func__,
 			    ret);
 			return(ret);
 		}
@@ -1951,7 +1951,7 @@ static int ftdi_tiocmget (struct usb_serial_port *port, struct file *file)
 
 static int ftdi_tiocmset(struct usb_serial_port *port, struct file * file, unsigned int set, unsigned int clear)
 {
-	dbg("%s TIOCMSET", __FUNCTION__);
+	dbg("%s TIOCMSET", __func__);
 	return update_mctrl(port, set, clear);
 }
 
@@ -1960,7 +1960,7 @@ static int ftdi_ioctl (struct usb_serial_port *port, struct file * file, unsigne
 {
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 
-	dbg("%s cmd 0x%04x", __FUNCTION__, cmd);
+	dbg("%s cmd 0x%04x", __func__, cmd);
 
 	/* Based on code from acm.c and others */
 	switch (cmd) {
@@ -2019,7 +2019,7 @@ static int ftdi_ioctl (struct usb_serial_port *port, struct file * file, unsigne
 	/* This is not necessarily an error - turns out the higher layers will do
 	 *  some ioctls itself (see comment above)
 	 */
-	dbg("%s arg not supported - it was 0x%04x - check /usr/include/asm/ioctls.h", __FUNCTION__, cmd);
+	dbg("%s arg not supported - it was 0x%04x - check /usr/include/asm/ioctls.h", __func__, cmd);
 
 	return(-ENOIOCTLCMD);
 } /* ftdi_ioctl */
@@ -2030,7 +2030,7 @@ static void ftdi_throttle (struct usb_serial_port *port)
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 
-	dbg("%s - port %d", __FUNCTION__, port->number);
+	dbg("%s - port %d", __func__, port->number);
 
 	spin_lock_irqsave(&priv->rx_lock, flags);
 	priv->rx_flags |= THROTTLED;
@@ -2044,7 +2044,7 @@ static void ftdi_unthrottle (struct usb_serial_port *port)
 	int actually_throttled;
 	unsigned long flags;
 
-	dbg("%s - port %d", __FUNCTION__, port->number);
+	dbg("%s - port %d", __func__, port->number);
 
 	spin_lock_irqsave(&priv->rx_lock, flags);
 	actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED;
@@ -2059,7 +2059,7 @@ static int __init ftdi_init (void)
 {
 	int retval;
 
-	dbg("%s", __FUNCTION__);
+	dbg("%s", __func__);
 	if (vendor > 0 && product > 0) {
 		/* Add user specified VID/PID to reserved element of table. */
 		int i;
@@ -2088,7 +2088,7 @@ failed_sio_register:
 static void __exit ftdi_exit (void)
 {
 
-	dbg("%s", __FUNCTION__);
+	dbg("%s", __func__);
 
 	usb_deregister (&ftdi_driver);
 	usb_serial_deregister (&ftdi_sio_device);