usb: phy: move msm_hsusb.h into driver

As a preparation for another cleanup, this moves the header file
for the phy-msm-usb driver into the driver itself. No other file
includes it any more, and we don't really want it in the global
namespace anyway.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

1 files changed, 177 insertions, 1 deletions

diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
index 72b387d..8a34759 100644
--- a/drivers/usb/phy/phy-msm-usb.c
+++ b/drivers/usb/phy/phy-msm-usb.c
@@ -18,6 +18,7 @@
 
 #include <linux/module.h>
 #include <linux/device.h>
+#include <linux/extcon.h>
 #include <linux/gpio/consumer.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
@@ -35,6 +36,8 @@
 #include <linux/of_device.h>
 #include <linux/reboot.h>
 #include <linux/reset.h>
+#include <linux/types.h>
+#include <linux/usb/otg.h>
 
 #include <linux/usb.h>
 #include <linux/usb/otg.h>
@@ -42,10 +45,183 @@
 #include <linux/usb/ulpi.h>
 #include <linux/usb/gadget.h>
 #include <linux/usb/hcd.h>
-#include <linux/usb/msm_hsusb.h>
 #include <linux/usb/msm_hsusb_hw.h>
 #include <linux/regulator/consumer.h>
 
+/**
+ * OTG control
+ *
+ * OTG_NO_CONTROL	Id/VBUS notifications not required. Useful in host
+ *                      only configuration.
+ * OTG_PHY_CONTROL	Id/VBUS notifications comes form USB PHY.
+ * OTG_PMIC_CONTROL	Id/VBUS notifications comes from PMIC hardware.
+ * OTG_USER_CONTROL	Id/VBUS notifcations comes from User via sysfs.
+ *
+ */
+enum otg_control_type {
+	OTG_NO_CONTROL = 0,
+	OTG_PHY_CONTROL,
+	OTG_PMIC_CONTROL,
+	OTG_USER_CONTROL,
+};
+
+/**
+ * PHY used in
+ *
+ * INVALID_PHY			Unsupported PHY
+ * CI_45NM_INTEGRATED_PHY	Chipidea 45nm integrated PHY
+ * SNPS_28NM_INTEGRATED_PHY	Synopsis 28nm integrated PHY
+ *
+ */
+enum msm_usb_phy_type {
+	INVALID_PHY = 0,
+	CI_45NM_INTEGRATED_PHY,
+	SNPS_28NM_INTEGRATED_PHY,
+};
+
+#define IDEV_CHG_MAX	1500
+#define IUNIT		100
+
+/**
+ * Different states involved in USB charger detection.
+ *
+ * USB_CHG_STATE_UNDEFINED	USB charger is not connected or detection
+ *                              process is not yet started.
+ * USB_CHG_STATE_WAIT_FOR_DCD	Waiting for Data pins contact.
+ * USB_CHG_STATE_DCD_DONE	Data pin contact is detected.
+ * USB_CHG_STATE_PRIMARY_DONE	Primary detection is completed (Detects
+ *                              between SDP and DCP/CDP).
+ * USB_CHG_STATE_SECONDARY_DONE	Secondary detection is completed (Detects
+ *                              between DCP and CDP).
+ * USB_CHG_STATE_DETECTED	USB charger type is determined.
+ *
+ */
+enum usb_chg_state {
+	USB_CHG_STATE_UNDEFINED = 0,
+	USB_CHG_STATE_WAIT_FOR_DCD,
+	USB_CHG_STATE_DCD_DONE,
+	USB_CHG_STATE_PRIMARY_DONE,
+	USB_CHG_STATE_SECONDARY_DONE,
+	USB_CHG_STATE_DETECTED,
+};
+
+/**
+ * USB charger types
+ *
+ * USB_INVALID_CHARGER	Invalid USB charger.
+ * USB_SDP_CHARGER	Standard downstream port. Refers to a downstream port
+ *                      on USB2.0 compliant host/hub.
+ * USB_DCP_CHARGER	Dedicated charger port (AC charger/ Wall charger).
+ * USB_CDP_CHARGER	Charging downstream port. Enumeration can happen and
+ *                      IDEV_CHG_MAX can be drawn irrespective of USB state.
+ *
+ */
+enum usb_chg_type {
+	USB_INVALID_CHARGER = 0,
+	USB_SDP_CHARGER,
+	USB_DCP_CHARGER,
+	USB_CDP_CHARGER,
+};
+
+/**
+ * struct msm_otg_platform_data - platform device data
+ *              for msm_otg driver.
+ * @phy_init_seq: PHY configuration sequence values. Value of -1 is reserved as
+ *              "do not overwrite default vaule at this address".
+ * @phy_init_sz: PHY configuration sequence size.
+ * @vbus_power: VBUS power on/off routine.
+ * @power_budget: VBUS power budget in mA (0 will be treated as 500mA).
+ * @mode: Supported mode (OTG/peripheral/host).
+ * @otg_control: OTG switch controlled by user/Id pin
+ */
+struct msm_otg_platform_data {
+	int *phy_init_seq;
+	int phy_init_sz;
+	void (*vbus_power)(bool on);
+	unsigned power_budget;
+	enum usb_dr_mode mode;
+	enum otg_control_type otg_control;
+	enum msm_usb_phy_type phy_type;
+	void (*setup_gpio)(enum usb_otg_state state);
+};
+
+/**
+ * struct msm_usb_cable - structure for exteternal connector cable
+ *			  state tracking
+ * @nb: hold event notification callback
+ * @conn: used for notification registration
+ */
+struct msm_usb_cable {
+	struct notifier_block		nb;
+	struct extcon_dev		*extcon;
+};
+
+/**
+ * struct msm_otg: OTG driver data. Shared by HCD and DCD.
+ * @otg: USB OTG Transceiver structure.
+ * @pdata: otg device platform data.
+ * @irq: IRQ number assigned for HSUSB controller.
+ * @clk: clock struct of usb_hs_clk.
+ * @pclk: clock struct of usb_hs_pclk.
+ * @core_clk: clock struct of usb_hs_core_clk.
+ * @regs: ioremapped register base address.
+ * @inputs: OTG state machine inputs(Id, SessValid etc).
+ * @sm_work: OTG state machine work.
+ * @in_lpm: indicates low power mode (LPM) state.
+ * @async_int: Async interrupt arrived.
+ * @cur_power: The amount of mA available from downstream port.
+ * @chg_work: Charger detection work.
+ * @chg_state: The state of charger detection process.
+ * @chg_type: The type of charger attached.
+ * @dcd_retires: The retry count used to track Data contact
+ *               detection process.
+ * @manual_pullup: true if VBUS is not routed to USB controller/phy
+ *	and controller driver therefore enables pull-up explicitly before
+ *	starting controller using usbcmd run/stop bit.
+ * @vbus: VBUS signal state trakining, using extcon framework
+ * @id: ID signal state trakining, using extcon framework
+ * @switch_gpio: Descriptor for GPIO used to control external Dual
+ *               SPDT USB Switch.
+ * @reboot: Used to inform the driver to route USB D+/D- line to Device
+ *	    connector
+ */
+struct msm_otg {
+	struct usb_phy phy;
+	struct msm_otg_platform_data *pdata;
+	int irq;
+	struct clk *clk;
+	struct clk *pclk;
+	struct clk *core_clk;
+	void __iomem *regs;
+#define ID		0
+#define B_SESS_VLD	1
+	unsigned long inputs;
+	struct work_struct sm_work;
+	atomic_t in_lpm;
+	int async_int;
+	unsigned cur_power;
+	int phy_number;
+	struct delayed_work chg_work;
+	enum usb_chg_state chg_state;
+	enum usb_chg_type chg_type;
+	u8 dcd_retries;
+	struct regulator *v3p3;
+	struct regulator *v1p8;
+	struct regulator *vddcx;
+
+	struct reset_control *phy_rst;
+	struct reset_control *link_rst;
+	int vdd_levels[3];
+
+	bool manual_pullup;
+
+	struct msm_usb_cable vbus;
+	struct msm_usb_cable id;
+
+	struct gpio_desc *switch_gpio;
+	struct notifier_block reboot;
+};
+
 #define MSM_USB_BASE	(motg->regs)
 #define DRIVER_NAME	"msm_otg"