diff options
author | Tim Bird <tbird20d@gmail.com> | 2014-04-28 16:34:20 +0300 |
---|---|---|
committer | Felipe Balbi <balbi@ti.com> | 2014-04-30 11:29:51 -0500 |
commit | 30bf8667cef5655ddfaedf043f13d03606844213 (patch) | |
tree | 6a1a3b176f6d2078d04b838830fd5b56a2384de0 /drivers/usb/phy/phy-msm-usb.c | |
parent | 9f27984b9e098ce0a35b210ec0315c76108494e4 (diff) | |
download | op-kernel-dev-30bf8667cef5655ddfaedf043f13d03606844213.zip op-kernel-dev-30bf8667cef5655ddfaedf043f13d03606844213.tar.gz |
usb: phy: msm: Select secondary PHY via TCSR
Select the secondary PHY using the TCSR register, if phy-num=1
in the DTS (or phy_number is set in the platform data). The
SOC has 2 PHYs which can be used with the OTG port, and this
code allows configuring the correct one.
Note: This resolves the problem I was seeing where I couldn't
get the USB driver working at all on a dragonboard, from cold
boot. This patch depends on patch 5/14 from Ivan's msm USB
patch set. It does not use DT for the register address, as
there's no evidence that this address changes between SoC
versions.
Signed-off-by: Tim Bird <tim.bird@sonymobile.com>
Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Diffstat (limited to 'drivers/usb/phy/phy-msm-usb.c')
-rw-r--r-- | drivers/usb/phy/phy-msm-usb.c | 14 |
1 files changed, 14 insertions, 0 deletions
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index db8d963..9437bcf 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -1489,6 +1489,7 @@ static int msm_otg_probe(struct platform_device *pdev) struct resource *res; struct msm_otg *motg; struct usb_phy *phy; + void __iomem *phy_select; motg = devm_kzalloc(&pdev->dev, sizeof(struct msm_otg), GFP_KERNEL); if (!motg) { @@ -1553,6 +1554,19 @@ static int msm_otg_probe(struct platform_device *pdev) if (IS_ERR(motg->regs)) return PTR_ERR(motg->regs); + /* + * NOTE: The PHYs can be multiplexed between the chipidea controller + * and the dwc3 controller, using a single bit. It is important that + * the dwc3 driver does not set this bit in an incompatible way. + */ + if (motg->phy_number) { + phy_select = devm_ioremap_nocache(&pdev->dev, USB2_PHY_SEL, 4); + if (IS_ERR(phy_select)) + return PTR_ERR(phy_select); + /* Enable second PHY with the OTG port */ + writel_relaxed(0x1, phy_select); + } + dev_info(&pdev->dev, "OTG regs = %p\n", motg->regs); motg->irq = platform_get_irq(pdev, 0); |