Merge tag 'usb-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB changes from Greg Kroah-Hartman:
 "Here is the big USB pull request for 3.7-rc1

  There are lots of gadget driver changes (including copying a bunch of
  files into the drivers/staging/ccg/ directory so that the other gadget
  drivers can be fixed up properly without breaking that driver), and we
  remove the old obsolete ub.c driver from the tree.

  There are also the usual XHCI set of updates, and other various driver
  changes and updates.  We also are trying hard to remove the old dbg()
  macro, but the final bits of that removal will be coming in through
  the networking tree before we can delete it for good.

  All of these patches have been in the linux-next tree.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fix up several annoying - but fairly mindless - conflicts due to the
termios structure having moved into the tty device, and often clashing
with dbg -> dev_dbg conversion.

* tag 'usb-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (339 commits)
  USB: ezusb: move ezusb.c from drivers/usb/serial to drivers/usb/misc
  USB: uas: fix gcc warning
  USB: uas: fix locking
  USB: Fix race condition when removing host controllers
  USB: uas: add locking
  USB: uas: fix abort
  USB: uas: remove aborted field, replace with status bit.
  USB: uas: fix task management
  USB: uas: keep track of command urbs
  xhci: Intel Panther Point BEI quirk.
  powerpc/usb: remove checking PHY_CLK_VALID for UTMI PHY
  USB: ftdi_sio: add TIAO USB Multi-Protocol Adapter (TUMPA) support
  Revert "usb : Add sysfs files to control port power."
  USB: serial: remove vizzini driver
  usb: host: xhci: Fix Null pointer dereferencing with 71c731a for non-x86 systems
  Increase XHCI suspend timeout to 16ms
  USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq
  USB: sierra_ms: don't keep unused variable
  fsl/usb: Add support for USB controller version 2.4
  USB: qcaux: add Pantech vendor class match
  ...

1 files changed, 105 insertions, 0 deletions

diff --git a/drivers/usb/phy/mv_u3d_phy.h b/drivers/usb/phy/mv_u3d_phy.h
new file mode 100644
index 0000000..2a658cb
--- /dev/null
+++ b/drivers/usb/phy/mv_u3d_phy.h
@@ -0,0 +1,105 @@
+/*
+ * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ */
+
+#ifndef __MV_U3D_PHY_H
+#define __MV_U3D_PHY_H
+
+#define USB3_POWER_PLL_CONTROL		0x1
+#define USB3_KVCO_CALI_CONTROL		0x2
+#define USB3_IMPEDANCE_CALI_CTRL	0x3
+#define USB3_IMPEDANCE_TX_SSC		0x4
+#define USB3_SQUELCH_FFE		0x6
+#define USB3_GEN1_SET0			0xD
+#define USB3_GEN2_SET0			0xF
+#define USB3_GEN2_SET1			0x10
+#define USB3_DIGITAL_LOOPBACK_EN	0x23
+#define USB3_PHY_ISOLATION_MODE		0x26
+#define USB3_TXDETRX			0x48
+#define USB3_TX_EMPPH			0x5E
+#define USB3_RESET_CONTROL		0x90
+#define USB3_PIPE_SM_CTRL		0x91
+
+#define USB3_RESET_CONTROL_RESET_PIPE			0x1
+#define USB3_RESET_CONTROL_RESET_PHY			0x2
+
+#define USB3_POWER_PLL_CONTROL_REF_FREF_SEL_MASK	(0x1F << 0)
+#define USB3_POWER_PLL_CONTROL_REF_FREF_SEL_SHIFT	0
+#define USB3_PLL_25MHZ					0x2
+#define USB3_PLL_26MHZ					0x5
+#define USB3_POWER_PLL_CONTROL_PHY_MODE_MASK		(0x7 << 5)
+#define USB3_POWER_PLL_CONTROL_PHY_MODE_SHIFT		5
+#define USB3_POWER_PLL_CONTROL_PU_MASK			(0xF << 12)
+#define USB3_POWER_PLL_CONTROL_PU_SHIFT			12
+#define USB3_POWER_PLL_CONTROL_PU			(0xF << 12)
+
+#define USB3_KVCO_CALI_CONTROL_USE_MAX_PLL_RATE_MASK	(0x1 << 12)
+#define USB3_KVCO_CALI_CONTROL_USE_MAX_PLL_RATE_SHIFT	12
+#define USB3_KVCO_CALI_CONTROL_CAL_DONE_SHIFT		14
+#define USB3_KVCO_CALI_CONTROL_CAL_START_SHIFT		15
+
+#define USB3_SQUELCH_FFE_FFE_CAP_SEL_MASK		0xF
+#define USB3_SQUELCH_FFE_FFE_CAP_SEL_SHIFT		0
+#define USB3_SQUELCH_FFE_FFE_RES_SEL_MASK		(0x7 << 4)
+#define USB3_SQUELCH_FFE_FFE_RES_SEL_SHIFT		4
+#define USB3_SQUELCH_FFE_SQ_THRESH_IN_MASK		(0x1F << 8)
+#define USB3_SQUELCH_FFE_SQ_THRESH_IN_SHIFT		8
+
+#define USB3_GEN1_SET0_G1_TX_SLEW_CTRL_EN_MASK		(0x1 << 15)
+#define USB3_GEN1_SET0_G1_TX_EMPH_EN_SHIFT		11
+
+#define USB3_GEN2_SET0_G2_TX_AMP_MASK			(0x1F << 1)
+#define USB3_GEN2_SET0_G2_TX_AMP_SHIFT			1
+#define USB3_GEN2_SET0_G2_TX_AMP_ADJ_SHIFT		6
+#define USB3_GEN2_SET0_G2_TX_EMPH_AMP_MASK		(0xF << 7)
+#define USB3_GEN2_SET0_G2_TX_EMPH_AMP_SHIFT		7
+#define USB3_GEN2_SET0_G2_TX_EMPH_EN_MASK		(0x1 << 11)
+#define USB3_GEN2_SET0_G2_TX_EMPH_EN_SHIFT		11
+#define USB3_GEN2_SET0_G2_TX_SLEW_CTRL_EN_MASK		(0x1 << 15)
+#define USB3_GEN2_SET0_G2_TX_SLEW_CTRL_EN_SHIFT		15
+
+#define USB3_GEN2_SET1_G2_RX_SELMUPI_MASK		(0x7 << 0)
+#define USB3_GEN2_SET1_G2_RX_SELMUPI_SHIFT		0
+#define USB3_GEN2_SET1_G2_RX_SELMUPF_MASK		(0x7 << 3)
+#define USB3_GEN2_SET1_G2_RX_SELMUPF_SHIFT		3
+#define USB3_GEN2_SET1_G2_RX_SELMUFI_MASK		(0x3 << 6)
+#define USB3_GEN2_SET1_G2_RX_SELMUFI_SHIFT		6
+#define USB3_GEN2_SET1_G2_RX_SELMUFF_MASK		(0x3 << 8)
+#define USB3_GEN2_SET1_G2_RX_SELMUFF_SHIFT		8
+
+#define USB3_DIGITAL_LOOPBACK_EN_SEL_BITS_MASK		(0x3 << 10)
+#define USB3_DIGITAL_LOOPBACK_EN_SEL_BITS_SHIFT		10
+
+#define USB3_IMPEDANCE_CALI_CTRL_IMP_CAL_THR_MASK	(0x7 << 12)
+#define USB3_IMPEDANCE_CALI_CTRL_IMP_CAL_THR_SHIFT	12
+
+#define USB3_IMPEDANCE_TX_SSC_SSC_AMP_MASK		(0x3F << 0)
+#define USB3_IMPEDANCE_TX_SSC_SSC_AMP_SHIFT		0
+
+#define USB3_PHY_ISOLATION_MODE_PHY_GEN_RX_MASK		0xF
+#define USB3_PHY_ISOLATION_MODE_PHY_GEN_RX_SHIFT	0
+#define USB3_PHY_ISOLATION_MODE_PHY_GEN_TX_MASK		(0xF << 4)
+#define USB3_PHY_ISOLATION_MODE_PHY_GEN_TX_SHIFT	4
+#define USB3_PHY_ISOLATION_MODE_TX_DRV_IDLE_MASK	(0x1 << 8)
+
+#define USB3_TXDETRX_VTHSEL_MASK			(0x3 << 4)
+#define USB3_TXDETRX_VTHSEL_SHIFT			4
+
+#define USB3_TX_EMPPH_AMP_MASK				(0xF << 0)
+#define USB3_TX_EMPPH_AMP_SHIFT				0
+#define USB3_TX_EMPPH_EN_MASK				(0x1 << 6)
+#define USB3_TX_EMPPH_EN_SHIFT				6
+#define USB3_TX_EMPPH_AMP_FORCE_MASK			(0x1 << 7)
+#define USB3_TX_EMPPH_AMP_FORCE_SHIFT			7
+#define USB3_TX_EMPPH_PAR1_MASK				(0x1F << 8)
+#define USB3_TX_EMPPH_PAR1_SHIFT			8
+#define USB3_TX_EMPPH_PAR2_MASK				(0x1 << 13)
+#define USB3_TX_EMPPH_PAR2_SHIFT			13
+
+#define USB3_PIPE_SM_CTRL_PHY_INIT_DONE			15
+
+#endif /* __MV_U3D_PHY_H */