diff options
author | Tony Lindgren <tony@atomide.com> | 2015-05-01 12:29:37 -0700 |
---|---|---|
committer | Felipe Balbi <balbi@ti.com> | 2015-05-07 13:36:31 -0500 |
commit | ac33cdb166811223cc3b47d276aa82ef877f6362 (patch) | |
tree | 55fd51d99c5b49489698b709bfb7a5076c3febd6 /drivers/usb/musb | |
parent | e530bb8f7963c2030d54974406d7d4fedc1a98d2 (diff) | |
download | op-kernel-dev-ac33cdb166811223cc3b47d276aa82ef877f6362.zip op-kernel-dev-ac33cdb166811223cc3b47d276aa82ef877f6362.tar.gz |
usb: musb: Remove ifdefs for musb_host_rx in musb_host.c part5
Remove ifdefs for musb_host_rx to get closer to building in
all the DMA drivers.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Diffstat (limited to 'drivers/usb/musb')
-rw-r--r-- | drivers/usb/musb/musb_host.c | 254 |
1 files changed, 140 insertions, 114 deletions
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 79826eb..2499515 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -1661,6 +1661,122 @@ static int musb_rx_dma_inventra_cppi41(struct dma_controller *dma, return done; } + +/* Disadvantage of using mode 1: + * It's basically usable only for mass storage class; essentially all + * other protocols also terminate transfers on short packets. + * + * Details: + * An extra IN token is sent at the end of the transfer (due to AUTOREQ) + * If you try to use mode 1 for (transfer_buffer_length - 512), and try + * to use the extra IN token to grab the last packet using mode 0, then + * the problem is that you cannot be sure when the device will send the + * last packet and RxPktRdy set. Sometimes the packet is recd too soon + * such that it gets lost when RxCSR is re-set at the end of the mode 1 + * transfer, while sometimes it is recd just a little late so that if you + * try to configure for mode 0 soon after the mode 1 transfer is + * completed, you will find rxcount 0. Okay, so you might think why not + * wait for an interrupt when the pkt is recd. Well, you won't get any! + */ +static int musb_rx_dma_in_inventra_cppi41(struct dma_controller *dma, + struct musb_hw_ep *hw_ep, + struct musb_qh *qh, + struct urb *urb, + size_t len, + u8 iso_err) +{ + struct musb *musb = hw_ep->musb; + void __iomem *epio = hw_ep->regs; + struct dma_channel *channel = hw_ep->rx_channel; + u16 rx_count, val; + int length, pipe, done; + dma_addr_t buf; + + rx_count = musb_readw(epio, MUSB_RXCOUNT); + pipe = urb->pipe; + + if (usb_pipeisoc(pipe)) { + int d_status = 0; + struct usb_iso_packet_descriptor *d; + + d = urb->iso_frame_desc + qh->iso_idx; + + if (iso_err) { + d_status = -EILSEQ; + urb->error_count++; + } + if (rx_count > d->length) { + if (d_status == 0) { + d_status = -EOVERFLOW; + urb->error_count++; + } + dev_dbg(musb->controller, "** OVERFLOW %d into %d\n", + rx_count, d->length); + + length = d->length; + } else + length = rx_count; + d->status = d_status; + buf = urb->transfer_dma + d->offset; + } else { + length = rx_count; + buf = urb->transfer_dma + urb->actual_length; + } + + channel->desired_mode = 0; +#ifdef USE_MODE1 + /* because of the issue below, mode 1 will + * only rarely behave with correct semantics. + */ + if ((urb->transfer_flags & URB_SHORT_NOT_OK) + && (urb->transfer_buffer_length - urb->actual_length) + > qh->maxpacket) + channel->desired_mode = 1; + if (rx_count < hw_ep->max_packet_sz_rx) { + length = rx_count; + channel->desired_mode = 0; + } else { + length = urb->transfer_buffer_length; + } +#endif + + /* See comments above on disadvantages of using mode 1 */ + val = musb_readw(epio, MUSB_RXCSR); + val &= ~MUSB_RXCSR_H_REQPKT; + + if (channel->desired_mode == 0) + val &= ~MUSB_RXCSR_H_AUTOREQ; + else + val |= MUSB_RXCSR_H_AUTOREQ; + val |= MUSB_RXCSR_DMAENAB; + + /* autoclear shouldn't be set in high bandwidth */ + if (qh->hb_mult == 1) + val |= MUSB_RXCSR_AUTOCLEAR; + + musb_writew(epio, MUSB_RXCSR, MUSB_RXCSR_H_WZC_BITS | val); + + /* REVISIT if when actual_length != 0, + * transfer_buffer_length needs to be + * adjusted first... + */ + done = dma->channel_program(channel, qh->maxpacket, + channel->desired_mode, + buf, length); + + if (!done) { + dma->channel_release(channel); + hw_ep->rx_channel = NULL; + channel = NULL; + val = musb_readw(epio, MUSB_RXCSR); + val &= ~(MUSB_RXCSR_DMAENAB + | MUSB_RXCSR_H_AUTOREQ + | MUSB_RXCSR_AUTOCLEAR); + musb_writew(epio, MUSB_RXCSR, val); + } + + return done; +} #else static inline int musb_rx_dma_inventra_cppi41(struct dma_controller *dma, struct musb_hw_ep *hw_ep, @@ -1670,6 +1786,16 @@ static inline int musb_rx_dma_inventra_cppi41(struct dma_controller *dma, { return false; } + +static inline int musb_rx_dma_in_inventra_cppi41(struct dma_controller *dma, + struct musb_hw_ep *hw_ep, + struct musb_qh *qh, + struct urb *urb, + size_t len, + u8 iso_err) +{ + return false; +} #endif /* @@ -1859,121 +1985,21 @@ void musb_host_rx(struct musb *musb, u8 epnum) /* we are expecting IN packets */ if ((musb_dma_inventra(musb) || musb_dma_ux500(musb) || musb_dma_cppi41(musb)) && dma) { - struct dma_controller *c; - u16 rx_count; - int ret, length; - dma_addr_t buf; - - rx_count = musb_readw(epio, MUSB_RXCOUNT); - - dev_dbg(musb->controller, "RX%d count %d, buffer 0x%llx len %d/%d\n", - epnum, rx_count, - (unsigned long long) urb->transfer_dma - + urb->actual_length, - qh->offset, - urb->transfer_buffer_length); - - c = musb->dma_controller; - - if (usb_pipeisoc(pipe)) { - int d_status = 0; - struct usb_iso_packet_descriptor *d; - - d = urb->iso_frame_desc + qh->iso_idx; - - if (iso_err) { - d_status = -EILSEQ; - urb->error_count++; - } - if (rx_count > d->length) { - if (d_status == 0) { - d_status = -EOVERFLOW; - urb->error_count++; - } - dev_dbg(musb->controller, "** OVERFLOW %d into %d\n",\ - rx_count, d->length); - - length = d->length; - } else - length = rx_count; - d->status = d_status; - buf = urb->transfer_dma + d->offset; - } else { - length = rx_count; - buf = urb->transfer_dma + - urb->actual_length; - } - - dma->desired_mode = 0; -#ifdef USE_MODE1 - /* because of the issue below, mode 1 will - * only rarely behave with correct semantics. - */ - if ((urb->transfer_flags & - URB_SHORT_NOT_OK) - && (urb->transfer_buffer_length - - urb->actual_length) - > qh->maxpacket) - dma->desired_mode = 1; - if (rx_count < hw_ep->max_packet_sz_rx) { - length = rx_count; - dma->desired_mode = 0; - } else { - length = urb->transfer_buffer_length; - } -#endif - -/* Disadvantage of using mode 1: - * It's basically usable only for mass storage class; essentially all - * other protocols also terminate transfers on short packets. - * - * Details: - * An extra IN token is sent at the end of the transfer (due to AUTOREQ) - * If you try to use mode 1 for (transfer_buffer_length - 512), and try - * to use the extra IN token to grab the last packet using mode 0, then - * the problem is that you cannot be sure when the device will send the - * last packet and RxPktRdy set. Sometimes the packet is recd too soon - * such that it gets lost when RxCSR is re-set at the end of the mode 1 - * transfer, while sometimes it is recd just a little late so that if you - * try to configure for mode 0 soon after the mode 1 transfer is - * completed, you will find rxcount 0. Okay, so you might think why not - * wait for an interrupt when the pkt is recd. Well, you won't get any! - */ - - val = musb_readw(epio, MUSB_RXCSR); - val &= ~MUSB_RXCSR_H_REQPKT; - - if (dma->desired_mode == 0) - val &= ~MUSB_RXCSR_H_AUTOREQ; + dev_dbg(hw_ep->musb->controller, + "RX%d count %d, buffer 0x%llx len %d/%d\n", + epnum, musb_readw(epio, MUSB_RXCOUNT), + (unsigned long long) urb->transfer_dma + + urb->actual_length, + qh->offset, + urb->transfer_buffer_length); + + done = musb_rx_dma_in_inventra_cppi41(c, hw_ep, qh, + urb, xfer_len, + iso_err); + if (done) + goto finish; else - val |= MUSB_RXCSR_H_AUTOREQ; - val |= MUSB_RXCSR_DMAENAB; - - /* autoclear shouldn't be set in high bandwidth */ - if (qh->hb_mult == 1) - val |= MUSB_RXCSR_AUTOCLEAR; - - musb_writew(epio, MUSB_RXCSR, - MUSB_RXCSR_H_WZC_BITS | val); - - /* REVISIT if when actual_length != 0, - * transfer_buffer_length needs to be - * adjusted first... - */ - ret = c->channel_program( - dma, qh->maxpacket, - dma->desired_mode, buf, length); - - if (!ret) { - c->channel_release(dma); - hw_ep->rx_channel = NULL; - dma = NULL; - val = musb_readw(epio, MUSB_RXCSR); - val &= ~(MUSB_RXCSR_DMAENAB - | MUSB_RXCSR_H_AUTOREQ - | MUSB_RXCSR_AUTOCLEAR); - musb_writew(epio, MUSB_RXCSR, val); - } + dev_err(musb->controller, "error: rx_dma failed\n"); } if (!dma) { |