usb: musb: add Kconfig options for each glue layer

This will make things simpler when choosing which
glue layer to compile. It avoids a lot of magic
around the "default" Kconfig option and lets the
user choose what exactly s/he wants to compile.

Signed-off-by: Felipe Balbi <balbi@ti.com>

6 files changed, 46 insertions, 70 deletions

diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 341a37a..7119d90 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -32,55 +32,35 @@ config USB_MUSB_HDRC
 	  To compile this driver as a module, choose M here; the
 	  module will be called "musb_hdrc".
 
-config USB_MUSB_SOC
-	boolean
+choice
+	prompt "Platform Glue Layer"
 	depends on USB_MUSB_HDRC
-	default y if ARCH_DAVINCI
-	default y if ARCH_OMAP2430
-	default y if ARCH_OMAP3
-	default y if ARCH_OMAP4
-	default y if (BF54x && !BF544)
-	default y if (BF52x && !BF522 && !BF523)
 
-comment "DaVinci 35x and 644x USB support"
-	depends on USB_MUSB_HDRC && ARCH_DAVINCI_DMx
+config USB_MUSB_DAVINCI
+	bool "DaVinci"
+	depends on ARCH_DAVINCI_DMx
 
-comment "DA8xx/OMAP-L1x USB support"
-	depends on USB_MUSB_HDRC && ARCH_DAVINCI_DA8XX
+config USB_MUSB_DA8XX
+	bool "DA8xx/OMAP-L1x"
+	depends on ARCH_DAVINCI_DA8XX
 
-comment "OMAP 243x high speed USB support"
-	depends on USB_MUSB_HDRC && ARCH_OMAP2430
+config USB_MUSB_TUSB6010
+	bool "TUSB6010"
+	depends on ARCH_OMAP
 
-comment "OMAP 343x high speed USB support"
-	depends on USB_MUSB_HDRC && ARCH_OMAP3
+config USB_MUSB_OMAP2PLUS
+	bool "OMAP2430 and onwards"
+	depends on ARCH_OMAP2PLUS
 
-comment "OMAP 44xx high speed USB support"
-	depends on USB_MUSB_HDRC && ARCH_OMAP4
+config USB_MUSB_AM35X
+	bool "AM35x"
+	depends on ARCH_OMAP
 
-comment "Blackfin high speed USB Support"
-	depends on USB_MUSB_HDRC && ((BF54x && !BF544) || (BF52x && !BF522 && !BF523))
+config USB_MUSB_BLACKFIN
+	bool "Blackfin"
+	depends on (BF54x && !BF544) || (BF52x && ! BF522 && !BF523)
 
-config USB_MUSB_AM35X
-	bool
-	depends on USB_MUSB_HDRC && !ARCH_OMAP2430 && !ARCH_OMAP4
-	select NOP_USB_XCEIV
-	default MACH_OMAP3517EVM
-	help
-	  Select this option if your platform is based on AM35x. As
-	  AM35x has an updated MUSB with CPPI4.1 DMA so this config
-	  is introduced to differentiate musb ip between OMAP3x and
-	  AM35x platforms.
-
-config USB_TUSB6010
-	boolean "TUSB 6010 support"
-	depends on USB_MUSB_HDRC && !USB_MUSB_SOC
-	select NOP_USB_XCEIV
-	default y
-	help
-	  The TUSB 6010 chip, from Texas Instruments, connects a discrete
-	  HDRC core using a 16-bit parallel bus (NOR flash style) or VLYNQ
-	  (a high speed serial link).  It can use system-specific external
-	  DMA controllers.
+endchoice
 
 choice
 	prompt "Driver Mode"
@@ -158,7 +138,7 @@ config USB_MUSB_HDRC_HCD
 config MUSB_PIO_ONLY
 	bool 'Disable DMA (always use PIO)'
 	depends on USB_MUSB_HDRC
-	default USB_TUSB6010 || ARCH_DAVINCI_DA8XX || USB_MUSB_AM35X
+	default USB_MUSB_TUSB6010 || USB_MUSB_DA8XX || USB_MUSB_AM35X
 	help
 	  All data is copied between memory and FIFO by the CPU.
 	  DMA controllers are ignored.
@@ -171,21 +151,21 @@ config MUSB_PIO_ONLY
 config USB_INVENTRA_DMA
 	bool
 	depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
-	default ARCH_OMAP2430 || ARCH_OMAP3 || BLACKFIN || ARCH_OMAP4
+	default USB_MUSB_OMAP2PLUS || USB_MUSB_BLACKFIN
 	help
 	  Enable DMA transfers using Mentor's engine.
 
 config USB_TI_CPPI_DMA
 	bool
 	depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
-	default ARCH_DAVINCI
+	default USB_MUSB_DAVINCI
 	help
 	  Enable DMA transfers when TI CPPI DMA is available.
 
 config USB_TUSB_OMAP_DMA
 	bool
 	depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
-	depends on USB_TUSB6010
+	depends on USB_MUSB_TUSB6010
 	depends on ARCH_OMAP
 	default y
 	help
diff --git a/drivers/usb/musb/Makefile b/drivers/usb/musb/Makefile
index ce164e8..52d18db 100644
--- a/drivers/usb/musb/Makefile
+++ b/drivers/usb/musb/Makefile
@@ -8,22 +8,19 @@ obj-$(CONFIG_USB_MUSB_HDRC) += musb_hdrc.o
 
 musb_hdrc-y := musb_core.o
 
-musb_hdrc-$(CONFIG_ARCH_DAVINCI_DMx)		+= davinci.o
-musb_hdrc-$(CONFIG_ARCH_DAVINCI_DA8XX)		+= da8xx.o
-musb_hdrc-$(CONFIG_USB_TUSB6010)		+= tusb6010.o
-musb_hdrc-$(CONFIG_ARCH_OMAP2430)		+= omap2430.o
-ifeq ($(CONFIG_USB_MUSB_AM35X),y)
-	musb_hdrc-$(CONFIG_ARCH_OMAP3430)	+= am35x.o
-else
-	musb_hdrc-$(CONFIG_ARCH_OMAP3430)	+= omap2430.o
-endif
-musb_hdrc-$(CONFIG_ARCH_OMAP4)			+= omap2430.o
-musb_hdrc-$(CONFIG_BF54x)			+= blackfin.o
-musb_hdrc-$(CONFIG_BF52x)			+= blackfin.o
 musb_hdrc-$(CONFIG_USB_GADGET_MUSB_HDRC)	+= musb_gadget_ep0.o musb_gadget.o
 musb_hdrc-$(CONFIG_USB_MUSB_HDRC_HCD)		+= musb_virthub.o musb_host.o
 musb_hdrc-$(CONFIG_DEBUG_FS)			+= musb_debugfs.o
 
+# Hardware Glue Layer
+
+musb_hdrc-$(CONFIG_USB_MUSB_DAVINCI)		+= davinci.o
+musb_hdrc-$(CONFIG_USB_MUSB_DA8XX)		+= da8xx.o
+musb_hdrc-$(CONFIG_USB_MUSB_TUSB6010)		+= tusb6010.o
+musb_hdrc-$(CONFIG_USB_MUSB_OMAP2PLUS)		+= omap2430.o
+musb_hdrc-$(CONFIG_USB_MUSB_AM35X)		+= am35x.o
+musb_hdrc-$(CONFIG_USB_MUSB_BLACKFIN)		+= blackfin.o
+
 # the kconfig must guarantee that only one of the
 # possible I/O schemes will be enabled at a time ...
 # PIO only, or DMA (several potential schemes).
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 5abcfe6..8df1c58 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -230,7 +230,7 @@ static struct otg_io_access_ops musb_ulpi_access = {
 
 /*-------------------------------------------------------------------------*/
 
-#if !defined(CONFIG_USB_TUSB6010) && !defined(CONFIG_BLACKFIN)
+#if !defined(CONFIG_USB_MUSB_TUSB6010) && !defined(CONFIG_USB_MUSB_BLACKFIN)
 
 /*
  * Load an endpoint's FIFO
@@ -1068,9 +1068,8 @@ static void musb_shutdown(struct platform_device *pdev)
  * We don't currently use dynamic fifo setup capability to do anything
  * more than selecting one of a bunch of predefined configurations.
  */
-#if defined(CONFIG_USB_TUSB6010) || \
-	defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) \
-	|| defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_USB_MUSB_TUSB6010) || defined(CONFIG_USB_MUSB_OMAP2PLUS) \
+	|| defined(CONFIG_USB_MUSB_AM35X)
 static ushort __initdata fifo_mode = 4;
 #else
 static ushort __initdata fifo_mode = 2;
@@ -1495,7 +1494,7 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb)
 		struct musb_hw_ep	*hw_ep = musb->endpoints + i;
 
 		hw_ep->fifo = MUSB_FIFO_OFFSET(i) + mbase;
-#ifdef CONFIG_USB_TUSB6010
+#ifdef CONFIG_USB_MUSB_TUSB6010
 		hw_ep->fifo_async = musb->async + 0x400 + MUSB_FIFO_OFFSET(i);
 		hw_ep->fifo_sync = musb->sync + 0x400 + MUSB_FIFO_OFFSET(i);
 		hw_ep->fifo_sync_va =
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index cb393e4..9594b9d 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -222,7 +222,7 @@ enum musb_g_ep0_state {
 #endif
 
 /* TUSB mapping: "flat" plus ep0 special cases */
-#if	defined(CONFIG_USB_TUSB6010)
+#if	defined(CONFIG_USB_MUSB_TUSB6010)
 #define musb_ep_select(_mbase, _epnum) \
 	musb_writeb((_mbase), MUSB_INDEX, (_epnum))
 #define	MUSB_EP_OFFSET			MUSB_TUSB_OFFSET
@@ -293,7 +293,7 @@ struct musb_hw_ep {
 	void __iomem		*fifo;
 	void __iomem		*regs;
 
-#ifdef CONFIG_USB_TUSB6010
+#ifdef CONFIG_USB_MUSB_TUSB6010
 	void __iomem		*conf;
 #endif
 
@@ -310,7 +310,7 @@ struct musb_hw_ep {
 	struct dma_channel	*tx_channel;
 	struct dma_channel	*rx_channel;
 
-#ifdef CONFIG_USB_TUSB6010
+#ifdef CONFIG_USB_MUSB_TUSB6010
 	/* TUSB has "asynchronous" and "synchronous" dma modes */
 	dma_addr_t		fifo_async;
 	dma_addr_t		fifo_sync;
@@ -432,7 +432,7 @@ struct musb {
 	void __iomem		*ctrl_base;
 	void __iomem		*mregs;
 
-#ifdef CONFIG_USB_TUSB6010
+#ifdef CONFIG_USB_MUSB_TUSB6010
 	dma_addr_t		async;
 	dma_addr_t		sync;
 	void __iomem		*sync_va;
diff --git a/drivers/usb/musb/musb_io.h b/drivers/usb/musb/musb_io.h
index b06e9ef..03c6ccd 100644
--- a/drivers/usb/musb/musb_io.h
+++ b/drivers/usb/musb/musb_io.h
@@ -74,7 +74,7 @@ static inline void musb_writel(void __iomem *addr, unsigned offset, u32 data)
 	{ __raw_writel(data, addr + offset); }
 
 
-#ifdef CONFIG_USB_TUSB6010
+#ifdef CONFIG_USB_MUSB_TUSB6010
 
 /*
  * TUSB6010 doesn't allow 8-bit access; 16-bit access is the minimum.
@@ -114,7 +114,7 @@ static inline u8 musb_readb(const void __iomem *addr, unsigned offset)
 static inline void musb_writeb(void __iomem *addr, unsigned offset, u8 data)
 	{ __raw_writeb(data, addr + offset); }
 
-#endif	/* CONFIG_USB_TUSB6010 */
+#endif	/* CONFIG_USB_MUSB_TUSB6010 */
 
 #else
 
diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h
index 2442675..9cb5fe0 100644
--- a/drivers/usb/musb/musb_regs.h
+++ b/drivers/usb/musb/musb_regs.h
@@ -234,7 +234,7 @@
 #define MUSB_TESTMODE		0x0F	/* 8 bit */
 
 /* Get offset for a given FIFO from musb->mregs */
-#ifdef	CONFIG_USB_TUSB6010
+#ifdef	CONFIG_USB_MUSB_TUSB6010
 #define MUSB_FIFO_OFFSET(epnum)	(0x200 + ((epnum) * 0x20))
 #else
 #define MUSB_FIFO_OFFSET(epnum)	(0x20 + ((epnum) * 4))
@@ -295,7 +295,7 @@
 #define MUSB_FLAT_OFFSET(_epnum, _offset)	\
 	(0x100 + (0x10*(_epnum)) + (_offset))
 
-#ifdef CONFIG_USB_TUSB6010
+#ifdef CONFIG_USB_MUSB_TUSB6010
 /* TUSB6010 EP0 configuration register is special */
 #define MUSB_TUSB_OFFSET(_epnum, _offset)	\
 	(0x10 + _offset)