diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2012-10-01 13:23:01 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2012-10-01 13:23:01 -0700 |
commit | d9a807461fc8cc0d6ba589ea0730d139122af012 (patch) | |
tree | 9d8c7a044659d821748dd40718a22557c04e4299 /drivers/usb/musb/tusb6010.c | |
parent | 3498d13b8090c0b0ef911409fbc503a7c4cca6ef (diff) | |
parent | 70c048a238c780c226eb4b115ebaa908cb3b34ec (diff) | |
download | op-kernel-dev-d9a807461fc8cc0d6ba589ea0730d139122af012.zip op-kernel-dev-d9a807461fc8cc0d6ba589ea0730d139122af012.tar.gz |
Merge tag 'usb-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB changes from Greg Kroah-Hartman:
"Here is the big USB pull request for 3.7-rc1
There are lots of gadget driver changes (including copying a bunch of
files into the drivers/staging/ccg/ directory so that the other gadget
drivers can be fixed up properly without breaking that driver), and we
remove the old obsolete ub.c driver from the tree.
There are also the usual XHCI set of updates, and other various driver
changes and updates. We also are trying hard to remove the old dbg()
macro, but the final bits of that removal will be coming in through
the networking tree before we can delete it for good.
All of these patches have been in the linux-next tree.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
Fix up several annoying - but fairly mindless - conflicts due to the
termios structure having moved into the tty device, and often clashing
with dbg -> dev_dbg conversion.
* tag 'usb-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (339 commits)
USB: ezusb: move ezusb.c from drivers/usb/serial to drivers/usb/misc
USB: uas: fix gcc warning
USB: uas: fix locking
USB: Fix race condition when removing host controllers
USB: uas: add locking
USB: uas: fix abort
USB: uas: remove aborted field, replace with status bit.
USB: uas: fix task management
USB: uas: keep track of command urbs
xhci: Intel Panther Point BEI quirk.
powerpc/usb: remove checking PHY_CLK_VALID for UTMI PHY
USB: ftdi_sio: add TIAO USB Multi-Protocol Adapter (TUMPA) support
Revert "usb : Add sysfs files to control port power."
USB: serial: remove vizzini driver
usb: host: xhci: Fix Null pointer dereferencing with 71c731a for non-x86 systems
Increase XHCI suspend timeout to 16ms
USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq
USB: sierra_ms: don't keep unused variable
fsl/usb: Add support for USB controller version 2.4
USB: qcaux: add Pantech vendor class match
...
Diffstat (limited to 'drivers/usb/musb/tusb6010.c')
-rw-r--r-- | drivers/usb/musb/tusb6010.c | 57 |
1 files changed, 28 insertions, 29 deletions
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c index 3416254..dc4d75e 100644 --- a/drivers/usb/musb/tusb6010.c +++ b/drivers/usb/musb/tusb6010.c @@ -24,6 +24,7 @@ #include <linux/irq.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/usb/nop-usb-xceiv.h> #include "musb_core.h" @@ -153,7 +154,7 @@ tusb_fifo_write_unaligned(void __iomem *fifo, const u8 *buf, u16 len) } static inline void tusb_fifo_read_unaligned(void __iomem *fifo, - void __iomem *buf, u16 len) + void *buf, u16 len) { u32 val; int i; @@ -437,14 +438,13 @@ static void musb_do_idle(unsigned long _musb) if (is_host_active(musb) && (musb->port1_status >> 16)) goto done; - if (is_peripheral_enabled(musb) && !musb->gadget_driver) { + if (!musb->gadget_driver) { wakeups = 0; } else { wakeups = TUSB_PRCM_WHOSTDISCON | TUSB_PRCM_WBUS | TUSB_PRCM_WVBUS; - if (is_otg_enabled(musb)) - wakeups |= TUSB_PRCM_WID; + wakeups |= TUSB_PRCM_WID; } tusb_allow_idle(musb, wakeups); } @@ -582,21 +582,12 @@ static void tusb_musb_set_vbus(struct musb *musb, int is_on) * * Note that if a mini-A cable is plugged in the ID line will stay down as * the weak ID pull-up is not able to pull the ID up. - * - * REVISIT: It would be possible to add support for changing between host - * and peripheral modes in non-OTG configurations by reconfiguring hardware - * and then setting musb->board_mode. For now, only support OTG mode. */ static int tusb_musb_set_mode(struct musb *musb, u8 musb_mode) { void __iomem *tbase = musb->ctrl_base; u32 otg_stat, phy_otg_ctrl, phy_otg_ena, dev_conf; - if (musb->board_mode != MUSB_OTG) { - ERR("Changing mode currently only supported in OTG mode\n"); - return -EINVAL; - } - otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT); phy_otg_ctrl = musb_readl(tbase, TUSB_PHY_OTG_CTRL); phy_otg_ena = musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE); @@ -652,10 +643,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase) if ((int_src & TUSB_INT_SRC_ID_STATUS_CHNG)) { int default_a; - if (is_otg_enabled(musb)) - default_a = !(otg_stat & TUSB_DEV_OTG_STAT_ID_STATUS); - else - default_a = is_host_enabled(musb); + default_a = !(otg_stat & TUSB_DEV_OTG_STAT_ID_STATUS); dev_dbg(musb->controller, "Default-%c\n", default_a ? 'A' : 'B'); otg->default_a = default_a; tusb_musb_set_vbus(musb, default_a); @@ -669,8 +657,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase) if (int_src & TUSB_INT_SRC_VBUS_SENSE_CHNG) { /* B-dev state machine: no vbus ~= disconnect */ - if ((is_otg_enabled(musb) && !otg->default_a) - || !is_host_enabled(musb)) { + if (!otg->default_a) { /* ? musb_root_disconnect(musb); */ musb->port1_status &= ~(USB_PORT_STAT_CONNECTION @@ -1119,10 +1106,8 @@ static int tusb_musb_init(struct musb *musb) } musb->isr = tusb_musb_interrupt; - if (is_peripheral_enabled(musb)) { - musb->xceiv->set_power = tusb_draw_power; - the_musb = musb; - } + musb->xceiv->set_power = tusb_draw_power; + the_musb = musb; setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb); @@ -1175,6 +1160,7 @@ static int __devinit tusb_probe(struct platform_device *pdev) struct tusb6010_glue *glue; int ret = -ENOMEM; + int musbid; glue = kzalloc(sizeof(*glue), GFP_KERNEL); if (!glue) { @@ -1182,12 +1168,21 @@ static int __devinit tusb_probe(struct platform_device *pdev) goto err0; } - musb = platform_device_alloc("musb-hdrc", -1); + /* get the musb id */ + musbid = musb_get_id(&pdev->dev, GFP_KERNEL); + if (musbid < 0) { + dev_err(&pdev->dev, "failed to allocate musb id\n"); + ret = -ENOMEM; + goto err1; + } + + musb = platform_device_alloc("musb-hdrc", musbid); if (!musb) { dev_err(&pdev->dev, "failed to allocate musb device\n"); - goto err1; + goto err2; } + musb->id = musbid; musb->dev.parent = &pdev->dev; musb->dev.dma_mask = &tusb_dmamask; musb->dev.coherent_dma_mask = tusb_dmamask; @@ -1203,26 +1198,29 @@ static int __devinit tusb_probe(struct platform_device *pdev) pdev->num_resources); if (ret) { dev_err(&pdev->dev, "failed to add resources\n"); - goto err2; + goto err3; } ret = platform_device_add_data(musb, pdata, sizeof(*pdata)); if (ret) { dev_err(&pdev->dev, "failed to add platform_data\n"); - goto err2; + goto err3; } ret = platform_device_add(musb); if (ret) { dev_err(&pdev->dev, "failed to register musb device\n"); - goto err2; + goto err3; } return 0; -err2: +err3: platform_device_put(musb); +err2: + musb_put_id(&pdev->dev, musbid); + err1: kfree(glue); @@ -1234,6 +1232,7 @@ static int __devexit tusb_remove(struct platform_device *pdev) { struct tusb6010_glue *glue = platform_get_drvdata(pdev); + musb_put_id(&pdev->dev, glue->musb->id); platform_device_del(glue->musb); platform_device_put(glue->musb); kfree(glue); |