diff options
author | Ajay Kumar Gupta <ajay.gupta@ti.com> | 2009-04-03 16:16:17 -0700 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@suse.de> | 2009-06-15 21:44:41 -0700 |
commit | a483d7068f661213e9586d4d132fc0e0287118b4 (patch) | |
tree | ff575463eacee555e070a2d2a049f7ac37d9fb38 /drivers/usb/musb/musb_host.c | |
parent | d1043a2697effee3054451a9293a376bfb013e4b (diff) | |
download | op-kernel-dev-a483d7068f661213e9586d4d132fc0e0287118b4.zip op-kernel-dev-a483d7068f661213e9586d4d132fc0e0287118b4.tar.gz |
musb: add high bandwidth ISO support
Tested on OMAP3 host side with Creative (Live! Cam Optia) USB camera
which uses high bandwidth isochronous IN endpoints. FIFO mode 4 is
updated to provide the needed 4K endpoint buffer without breaking
the g_nokia composite gadget configuration. (This is the only
gadget driver known to use enough endpoints to notice the change.)
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Diffstat (limited to 'drivers/usb/musb/musb_host.c')
-rw-r--r-- | drivers/usb/musb/musb_host.c | 47 |
1 files changed, 35 insertions, 12 deletions
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 0d1f153..94a2a35 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -605,7 +605,8 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep) musb_writeb(ep->regs, MUSB_RXTYPE, qh->type_reg); musb_writeb(ep->regs, MUSB_RXINTERVAL, qh->intv_reg); /* NOTE: bulk combining rewrites high bits of maxpacket */ - musb_writew(ep->regs, MUSB_RXMAXP, qh->maxpacket); + musb_writew(ep->regs, MUSB_RXMAXP, + qh->maxpacket | ((qh->hb_mult - 1) << 11)); ep->rx_reinit = 0; } @@ -627,9 +628,10 @@ static bool musb_tx_dma_program(struct dma_controller *dma, csr = musb_readw(epio, MUSB_TXCSR); if (length > pkt_size) { mode = 1; - csr |= MUSB_TXCSR_AUTOSET - | MUSB_TXCSR_DMAMODE - | MUSB_TXCSR_DMAENAB; + csr |= MUSB_TXCSR_DMAMODE | MUSB_TXCSR_DMAENAB; + /* autoset shouldn't be set in high bandwidth */ + if (qh->hb_mult == 1) + csr |= MUSB_TXCSR_AUTOSET; } else { mode = 0; csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAMODE); @@ -1497,6 +1499,10 @@ void musb_host_rx(struct musb *musb, u8 epnum) /* packet error reported later */ iso_err = true; } + } else if (rx_csr & MUSB_RXCSR_INCOMPRX) { + DBG(3, "end %d high bandwidth incomplete ISO packet RX\n", + epnum); + status = -EPROTO; } /* faults abort the transfer */ @@ -1704,7 +1710,11 @@ void musb_host_rx(struct musb *musb, u8 epnum) val &= ~MUSB_RXCSR_H_AUTOREQ; else val |= MUSB_RXCSR_H_AUTOREQ; - val |= MUSB_RXCSR_AUTOCLEAR | MUSB_RXCSR_DMAENAB; + val |= MUSB_RXCSR_DMAENAB; + + /* autoclear shouldn't be set in high bandwidth */ + if (qh->hb_mult == 1) + val |= MUSB_RXCSR_AUTOCLEAR; musb_writew(epio, MUSB_RXCSR, MUSB_RXCSR_H_WZC_BITS | val); @@ -1790,9 +1800,10 @@ static int musb_schedule( continue; if (is_in) - diff = hw_ep->max_packet_sz_rx - qh->maxpacket; + diff = hw_ep->max_packet_sz_rx; else - diff = hw_ep->max_packet_sz_tx - qh->maxpacket; + diff = hw_ep->max_packet_sz_tx; + diff -= (qh->maxpacket * qh->hb_mult); if (diff >= 0 && best_diff > diff) { best_diff = diff; @@ -1895,15 +1906,27 @@ static int musb_urb_enqueue( qh->is_ready = 1; qh->maxpacket = le16_to_cpu(epd->wMaxPacketSize); + qh->type = usb_endpoint_type(epd); - /* no high bandwidth support yet */ - if (qh->maxpacket & ~0x7ff) { - ret = -EMSGSIZE; - goto done; + /* Bits 11 & 12 of wMaxPacketSize encode high bandwidth multiplier. + * Some musb cores don't support high bandwidth ISO transfers; and + * we don't (yet!) support high bandwidth interrupt transfers. + */ + qh->hb_mult = 1 + ((qh->maxpacket >> 11) & 0x03); + if (qh->hb_mult > 1) { + int ok = (qh->type == USB_ENDPOINT_XFER_ISOC); + + if (ok) + ok = (usb_pipein(urb->pipe) && musb->hb_iso_rx) + || (usb_pipeout(urb->pipe) && musb->hb_iso_tx); + if (!ok) { + ret = -EMSGSIZE; + goto done; + } + qh->maxpacket &= 0x7ff; } qh->epnum = usb_endpoint_num(epd); - qh->type = usb_endpoint_type(epd); /* NOTE: urb->dev->devnum is wrong during SET_ADDRESS */ qh->addr_reg = (u8) usb_pipedevice(urb->pipe); |