Merge tag 'usb-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB updates from Greg KH:
 "Here's the big set of USB and PHY patches for 3.19-rc1.

  The normal churn in the USB gadget area is in here, as well as xhci
  and other individual USB driver updates.  The PHY tree is also in
  here, as there were dependancies on the USB tree.

  All of these have been in linux-next"

* tag 'usb-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (351 commits)
  arm: omap3: twl: remove usb phy init data
  usbip: fix error handling in stub_probe()
  usb: gadget: udc: missing curly braces
  USB: mos7720: delete some unneeded code
  wusb: replace memset by memzero_explicit
  usbip: remove unneeded structure
  usb: xhci: fix comment for PORT_DEV_REMOVE
  xhci: don't use the same variable for stopped and halted rings current TD
  xhci: clear extra bits from slot context when setting max exit latency
  xhci: cleanup finish_td function
  USB: adutux: NULL dereferences on disconnect
  usb: chipidea: fix platform_no_drv_owner.cocci warnings
  usb: chipidea: Fixed a few typos in comments
  Documentation: bindings: add doc for the USB2 ChipIdea USB driver
  usb: chipidea: add a usb2 driver for ci13xxx
  usb: chipidea: fix phy handling
  usb: chipidea: remove duplicate dev_set_drvdata for host_start
  usb: chipidea: parameter 'mode' isn't needed for hw_device_reset
  usb: chipidea: add controller reset API
  usb: chipidea: remove flag CI_HDRC_REQUIRE_TRANSCEIVER
  ...

1 files changed, 45 insertions, 42 deletions

diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 414e57a..5e65958 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -124,41 +124,6 @@ enum musb_g_ep0_state {
 #define OTG_TIME_A_AIDL_BDIS	200		/* min 200 msec */
 #define OTG_TIME_B_ASE0_BRST	100		/* min 3.125 ms */
 
-
-/*************************** REGISTER ACCESS ********************************/
-
-/* Endpoint registers (other than dynfifo setup) can be accessed either
- * directly with the "flat" model, or after setting up an index register.
- */
-
-#if defined(CONFIG_ARCH_DAVINCI) || defined(CONFIG_SOC_OMAP2430) \
-		|| defined(CONFIG_SOC_OMAP3430) || defined(CONFIG_BLACKFIN) \
-		|| defined(CONFIG_ARCH_OMAP4)
-/* REVISIT indexed access seemed to
- * misbehave (on DaVinci) for at least peripheral IN ...
- */
-#define	MUSB_FLAT_REG
-#endif
-
-/* TUSB mapping: "flat" plus ep0 special cases */
-#if defined(CONFIG_USB_MUSB_TUSB6010) || \
-	defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
-#define musb_ep_select(_mbase, _epnum) \
-	musb_writeb((_mbase), MUSB_INDEX, (_epnum))
-#define	MUSB_EP_OFFSET			MUSB_TUSB_OFFSET
-
-/* "flat" mapping: each endpoint has its own i/o address */
-#elif	defined(MUSB_FLAT_REG)
-#define musb_ep_select(_mbase, _epnum)	(((void)(_mbase)), ((void)(_epnum)))
-#define	MUSB_EP_OFFSET			MUSB_FLAT_OFFSET
-
-/* "indexed" mapping: INDEX register controls register bank select */
-#else
-#define musb_ep_select(_mbase, _epnum) \
-	musb_writeb((_mbase), MUSB_INDEX, (_epnum))
-#define	MUSB_EP_OFFSET			MUSB_INDEXED_OFFSET
-#endif
-
 /****************************** FUNCTIONS ********************************/
 
 #define MUSB_HST_MODE(_musb)\
@@ -173,8 +138,25 @@ enum musb_g_ep0_state {
 
 /******************************** TYPES *************************************/
 
+struct musb_io;
+
 /**
  * struct musb_platform_ops - Operations passed to musb_core by HW glue layer
+ * @quirks:	flags for platform specific quirks
+ * @enable:	enable device
+ * @disable:	disable device
+ * @ep_offset:	returns the end point offset
+ * @ep_select:	selects the specified end point
+ * @fifo_mode:	sets the fifo mode
+ * @fifo_offset: returns the fifo offset
+ * @readb:	read 8 bits
+ * @writeb:	write 8 bits
+ * @readw:	read 16 bits
+ * @writew:	write 16 bits
+ * @readl:	read 32 bits
+ * @writel:	write 32 bits
+ * @read_fifo:	reads the fifo
+ * @write_fifo:	writes to fifo
  * @init:	turns on clocks, sets up platform-specific registers, etc
  * @exit:	undoes @init
  * @set_mode:	forcefully changes operating mode
@@ -184,12 +166,34 @@ enum musb_g_ep0_state {
  * @adjust_channel_params: pre check for standard dma channel_program func
  */
 struct musb_platform_ops {
+
+#define MUSB_DMA_UX500		BIT(6)
+#define MUSB_DMA_CPPI41		BIT(5)
+#define MUSB_DMA_CPPI		BIT(4)
+#define MUSB_DMA_TUSB_OMAP	BIT(3)
+#define MUSB_DMA_INVENTRA	BIT(2)
+#define MUSB_IN_TUSB		BIT(1)
+#define MUSB_INDEXED_EP		BIT(0)
+	u32	quirks;
+
 	int	(*init)(struct musb *musb);
 	int	(*exit)(struct musb *musb);
 
 	void	(*enable)(struct musb *musb);
 	void	(*disable)(struct musb *musb);
 
+	u32	(*ep_offset)(u8 epnum, u16 offset);
+	void	(*ep_select)(void __iomem *mbase, u8 epnum);
+	u16	fifo_mode;
+	u32	(*fifo_offset)(u8 epnum);
+	u8	(*readb)(const void __iomem *addr, unsigned offset);
+	void	(*writeb)(void __iomem *addr, unsigned offset, u8 data);
+	u16	(*readw)(const void __iomem *addr, unsigned offset);
+	void	(*writew)(void __iomem *addr, unsigned offset, u16 data);
+	u32	(*readl)(const void __iomem *addr, unsigned offset);
+	void	(*writel)(void __iomem *addr, unsigned offset, u32 data);
+	void	(*read_fifo)(struct musb_hw_ep *hw_ep, u16 len, u8 *buf);
+	void	(*write_fifo)(struct musb_hw_ep *hw_ep, u16 len, const u8 *buf);
 	int	(*set_mode)(struct musb *musb, u8 mode);
 	void	(*try_idle)(struct musb *musb, unsigned long timeout);
 	int	(*reset)(struct musb *musb);
@@ -212,8 +216,7 @@ struct musb_hw_ep {
 	void __iomem		*fifo;
 	void __iomem		*regs;
 
-#if defined(CONFIG_USB_MUSB_TUSB6010) || \
-	defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
+#if IS_ENABLED(CONFIG_USB_MUSB_TUSB6010)
 	void __iomem		*conf;
 #endif
 
@@ -230,8 +233,7 @@ struct musb_hw_ep {
 	struct dma_channel	*tx_channel;
 	struct dma_channel	*rx_channel;
 
-#if defined(CONFIG_USB_MUSB_TUSB6010) || \
-	defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
+#if IS_ENABLED(CONFIG_USB_MUSB_TUSB6010)
 	/* TUSB has "asynchronous" and "synchronous" dma modes */
 	dma_addr_t		fifo_async;
 	dma_addr_t		fifo_sync;
@@ -292,6 +294,7 @@ struct musb {
 	/* device lock */
 	spinlock_t		lock;
 
+	struct musb_io		io;
 	const struct musb_platform_ops *ops;
 	struct musb_context_registers context;
 
@@ -334,8 +337,7 @@ struct musb {
 	void __iomem		*ctrl_base;
 	void __iomem		*mregs;
 
-#if defined(CONFIG_USB_MUSB_TUSB6010) || \
-	defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
+#if IS_ENABLED(CONFIG_USB_MUSB_TUSB6010)
 	dma_addr_t		async;
 	dma_addr_t		sync;
 	void __iomem		*sync_va;
@@ -390,6 +392,7 @@ struct musb {
 
 	/* is_suspended means USB B_PERIPHERAL suspend */
 	unsigned		is_suspended:1;
+	unsigned		need_finish_resume :1;
 
 	/* may_wakeup means remote wakeup is enabled */
 	unsigned		may_wakeup:1;
@@ -474,7 +477,7 @@ static inline int musb_read_fifosize(struct musb *musb,
 	u8 reg = 0;
 
 	/* read from core using indexed model */
-	reg = musb_readb(mbase, MUSB_EP_OFFSET(epnum, MUSB_FIFOSIZE));
+	reg = musb_readb(mbase, musb->io.ep_offset(epnum, MUSB_FIFOSIZE));
 	/* 0's returned when no more endpoints */
 	if (!reg)
 		return -ENODEV;