summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host
diff options
context:
space:
mode:
authorMathias Nyman <mathias.nyman@linux.intel.com>2014-11-27 18:19:14 +0200
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2014-12-02 16:14:29 -0800
commit69defe04ec825e42e0d719cca5a23f48b624bee9 (patch)
treef07dc19714d480df457c718cb2f5af1cb4717aaf /drivers/usb/host
parentc00552ebafddfe6abb397d957004f165e010abd2 (diff)
downloadop-kernel-dev-69defe04ec825e42e0d719cca5a23f48b624bee9.zip
op-kernel-dev-69defe04ec825e42e0d719cca5a23f48b624bee9.tar.gz
xhci: cleanup finish_td function
Remove unnecessary else after return, dropping extra indentation depth. No functional changes. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/usb/host')
-rw-r--r--drivers/usb/host/xhci-ring.c105
1 files changed, 49 insertions, 56 deletions
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 06433ae..5f60932 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1813,72 +1813,65 @@ static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td,
if (skip)
goto td_cleanup;
- if (trb_comp_code == COMP_STOP_INVAL ||
- trb_comp_code == COMP_STOP) {
+ if (trb_comp_code == COMP_STOP_INVAL || trb_comp_code == COMP_STOP) {
/* The Endpoint Stop Command completion will take care of any
* stopped TDs. A stopped TD may be restarted, so don't update
* the ring dequeue pointer or take this TD off any lists yet.
*/
ep->stopped_td = td;
return 0;
+ }
+ if (trb_comp_code == COMP_STALL ||
+ xhci_requires_manual_halt_cleanup(xhci, ep_ctx,
+ trb_comp_code)) {
+ /* Issue a reset endpoint command to clear the host side
+ * halt, followed by a set dequeue command to move the
+ * dequeue pointer past the TD.
+ * The class driver clears the device side halt later.
+ */
+ xhci_cleanup_halted_endpoint(xhci, slot_id, ep_index,
+ ep_ring->stream_id, td, event_trb);
} else {
- if (trb_comp_code == COMP_STALL ||
- xhci_requires_manual_halt_cleanup(xhci, ep_ctx,
- trb_comp_code)) {
- /* Issue a reset endpoint command to clear the host side
- * halt, followed by a set dequeue command to move the
- * dequeue pointer past the TD.
- * The class driver clears the device side halt later.
- */
- xhci_cleanup_halted_endpoint(xhci,
- slot_id, ep_index, ep_ring->stream_id,
- td, event_trb);
- } else {
- /* Update ring dequeue pointer */
- while (ep_ring->dequeue != td->last_trb)
- inc_deq(xhci, ep_ring);
+ /* Update ring dequeue pointer */
+ while (ep_ring->dequeue != td->last_trb)
inc_deq(xhci, ep_ring);
- }
+ inc_deq(xhci, ep_ring);
+ }
td_cleanup:
- /* Clean up the endpoint's TD list */
- urb = td->urb;
- urb_priv = urb->hcpriv;
-
- /* Do one last check of the actual transfer length.
- * If the host controller said we transferred more data than
- * the buffer length, urb->actual_length will be a very big
- * number (since it's unsigned). Play it safe and say we didn't
- * transfer anything.
- */
- if (urb->actual_length > urb->transfer_buffer_length) {
- xhci_warn(xhci, "URB transfer length is wrong, "
- "xHC issue? req. len = %u, "
- "act. len = %u\n",
- urb->transfer_buffer_length,
- urb->actual_length);
- urb->actual_length = 0;
- if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
- *status = -EREMOTEIO;
- else
- *status = 0;
- }
- list_del_init(&td->td_list);
- /* Was this TD slated to be cancelled but completed anyway? */
- if (!list_empty(&td->cancelled_td_list))
- list_del_init(&td->cancelled_td_list);
-
- urb_priv->td_cnt++;
- /* Giveback the urb when all the tds are completed */
- if (urb_priv->td_cnt == urb_priv->length) {
- ret = 1;
- if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
- xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs--;
- if (xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs
- == 0) {
- if (xhci->quirks & XHCI_AMD_PLL_FIX)
- usb_amd_quirk_pll_enable();
- }
+ /* Clean up the endpoint's TD list */
+ urb = td->urb;
+ urb_priv = urb->hcpriv;
+
+ /* Do one last check of the actual transfer length.
+ * If the host controller said we transferred more data than the buffer
+ * length, urb->actual_length will be a very big number (since it's
+ * unsigned). Play it safe and say we didn't transfer anything.
+ */
+ if (urb->actual_length > urb->transfer_buffer_length) {
+ xhci_warn(xhci, "URB transfer length is wrong, xHC issue? req. len = %u, act. len = %u\n",
+ urb->transfer_buffer_length,
+ urb->actual_length);
+ urb->actual_length = 0;
+ if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+ *status = -EREMOTEIO;
+ else
+ *status = 0;
+ }
+ list_del_init(&td->td_list);
+ /* Was this TD slated to be cancelled but completed anyway? */
+ if (!list_empty(&td->cancelled_td_list))
+ list_del_init(&td->cancelled_td_list);
+
+ urb_priv->td_cnt++;
+ /* Giveback the urb when all the tds are completed */
+ if (urb_priv->td_cnt == urb_priv->length) {
+ ret = 1;
+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
+ xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs--;
+ if (xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs == 0) {
+ if (xhci->quirks & XHCI_AMD_PLL_FIX)
+ usb_amd_quirk_pll_enable();
}
}
}
OpenPOWER on IntegriCloud